kolibrios-gitea/drivers/video/drm/i915/i915_guc_reg.h

110 lines
3.9 KiB
C
Raw Normal View History

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#ifndef _I915_GUC_REG_H_
#define _I915_GUC_REG_H_
/* Definitions of GuC H/W registers, bits, etc */
#define GUC_STATUS 0xc000
#define GS_BOOTROM_SHIFT 1
#define GS_BOOTROM_MASK (0x7F << GS_BOOTROM_SHIFT)
#define GS_BOOTROM_RSA_FAILED (0x50 << GS_BOOTROM_SHIFT)
#define GS_UKERNEL_SHIFT 8
#define GS_UKERNEL_MASK (0xFF << GS_UKERNEL_SHIFT)
#define GS_UKERNEL_LAPIC_DONE (0x30 << GS_UKERNEL_SHIFT)
#define GS_UKERNEL_DPC_ERROR (0x60 << GS_UKERNEL_SHIFT)
#define GS_UKERNEL_READY (0xF0 << GS_UKERNEL_SHIFT)
#define GS_MIA_SHIFT 16
#define GS_MIA_MASK (0x07 << GS_MIA_SHIFT)
#define GS_MIA_CORE_STATE (1 << GS_MIA_SHIFT)
#define SOFT_SCRATCH(n) (0xc180 + ((n) * 4))
#define UOS_RSA_SCRATCH(i) (0xc200 + (i) * 4)
#define DMA_ADDR_0_LOW 0xc300
#define DMA_ADDR_0_HIGH 0xc304
#define DMA_ADDR_1_LOW 0xc308
#define DMA_ADDR_1_HIGH 0xc30c
#define DMA_ADDRESS_SPACE_WOPCM (7 << 16)
#define DMA_ADDRESS_SPACE_GTT (8 << 16)
#define DMA_COPY_SIZE 0xc310
#define DMA_CTRL 0xc314
#define UOS_MOVE (1<<4)
#define START_DMA (1<<0)
#define DMA_GUC_WOPCM_OFFSET 0xc340
#define GUC_WOPCM_OFFSET_VALUE 0x80000 /* 512KB */
#define GUC_MAX_IDLE_COUNT 0xC3E4
#define GUC_WOPCM_SIZE 0xc050
#define GUC_WOPCM_SIZE_VALUE (0x80 << 12) /* 512KB */
/* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */
#define GUC_WOPCM_TOP (GUC_WOPCM_SIZE_VALUE)
#define GEN8_GT_PM_CONFIG 0x138140
#define GEN9LP_GT_PM_CONFIG 0x138140
#define GEN9_GT_PM_CONFIG 0x13816c
#define GT_DOORBELL_ENABLE (1<<0)
#define GEN8_GTCR 0x4274
#define GEN8_GTCR_INVALIDATE (1<<0)
#define GUC_ARAT_C6DIS 0xA178
#define GUC_SHIM_CONTROL 0xc064
#define GUC_DISABLE_SRAM_INIT_TO_ZEROES (1<<0)
#define GUC_ENABLE_READ_CACHE_LOGIC (1<<1)
#define GUC_ENABLE_MIA_CACHING (1<<2)
#define GUC_GEN10_MSGCH_ENABLE (1<<4)
#define GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA (1<<9)
#define GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA (1<<10)
#define GUC_ENABLE_MIA_CLOCK_GATING (1<<15)
#define GUC_GEN10_SHIM_WC_ENABLE (1<<21)
#define GUC_SHIM_CONTROL_VALUE (GUC_DISABLE_SRAM_INIT_TO_ZEROES | \
GUC_ENABLE_READ_CACHE_LOGIC | \
GUC_ENABLE_MIA_CACHING | \
GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA | \
GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA | \
GUC_ENABLE_MIA_CLOCK_GATING)
#define HOST2GUC_INTERRUPT 0xc4c8
#define HOST2GUC_TRIGGER (1<<0)
#define DRBMISC1 0x1984
#define DOORBELL_ENABLE (1<<0)
#define GEN8_DRBREGL(x) (0x1000 + (x) * 8)
#define GEN8_DRB_VALID (1<<0)
#define GEN8_DRBREGU(x) (GEN8_DRBREGL(x) + 4)
#define DE_GUCRMR 0x44054
#define GUC_BCS_RCS_IER 0xC550
#define GUC_VCS2_VCS1_IER 0xC554
#define GUC_WD_VECS_IER 0xC558
#define GUC_PM_P24C_IER 0xC55C
#endif