kolibrios-gitea/kernel/trunk/network/stack.inc

797 lines
19 KiB
PHP
Raw Normal View History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2013. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; STACK.INC ;;
;; ;;
;; TCP/IP stack for KolibriOS ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; Some parts of code are based on the work of: ;;
;; Mike Hibbett (menuetos network stack) ;;
;; Eugen Brasoveanu (solar os network stack and drivers) ;;
;; mike.dld (kolibrios socket code) ;;
;; ;;
;; TCP part is based on 4.4BSD ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
uglobal
net_10ms dd ?
net_tmr_count dw ?
endg
DEBUG_NETWORK_ERROR = 1
DEBUG_NETWORK_VERBOSE = 0
NET_DEVICES_MAX = 16
ARP_BLOCK = 1 ; true or false
EPHEMERAL_PORT_MIN = 49152
EPHEMERAL_PORT_MAX = 61000
MIN_EPHEMERAL_PORT_N = 0x00C0 ; same in Network byte order (FIXME)
MAX_EPHEMERAL_PORT_N = 0x48EE ; same in Network byte order (FIXME)
; Ethernet protocol numbers
ETHER_PROTO_ARP = 0x0608
ETHER_PROTO_IPv4 = 0x0008
ETHER_PROTO_IPv6 = 0xDD86
ETHER_PROTO_PPP_DISCOVERY = 0x6388
ETHER_PROTO_PPP_SESSION = 0x6488
; Internet protocol numbers
IP_PROTO_IP = 0
IP_PROTO_ICMP = 1
IP_PROTO_TCP = 6
IP_PROTO_UDP = 17
; PPP protocol numbers
PPP_PROTO_IPv4 = 0x2100
PPP_PROTO_IPV6 = 0x5780
PPP_PROTO_ETHERNET = 666 ; FIXME
;Protocol family
AF_UNSPEC = 0
AF_LOCAL = 1
AF_INET4 = 2
AF_INET6 = 10
AF_PPP = 777 ; FIXME
; Socket types
SOCK_STREAM = 1
SOCK_DGRAM = 2
SOCK_RAW = 3
; Socket options
SO_ACCEPTCON = 1 shl 0
SO_BROADCAST = 1 shl 1
SO_DEBUG = 1 shl 2
SO_DONTROUTE = 1 shl 3
SO_KEEPALIVE = 1 shl 4
SO_OOBINLINE = 1 shl 5
SO_REUSEADDR = 1 shl 6
SO_REUSEPORT = 1 shl 7
SO_USELOOPBACK = 1 shl 8
SO_BINDTODEVICE = 1 shl 9
SO_NONBLOCK = 1 shl 31
; Socket flags for user calls
MSG_PEEK = 0x02
MSG_DONTWAIT = 0x40
; Socket level
SOL_SOCKET = 0
; Socket States
SS_NOFDREF = 0x0001 ; no file table ref any more
SS_ISCONNECTED = 0x0002 ; socket connected to a peer
SS_ISCONNECTING = 0x0004 ; in process of connecting to peer
SS_ISDISCONNECTING = 0x0008 ; in process of disconnecting
SS_CANTSENDMORE = 0x0010 ; can't send more data to peer
SS_CANTRCVMORE = 0x0020 ; can't receive more data from peer
SS_RCVATMARK = 0x0040 ; at mark on input
SS_ISABORTING = 0x0080 ; aborting fd references - close()
SS_RESTARTSYS = 0x0100 ; restart blocked system calls
SS_ISDISCONNECTED = 0x0800 ; socket disconnected from peer
SS_ASYNC = 0x1000 ; async i/o notify
SS_ISCONFIRMING = 0x2000 ; deciding to accept connection req
SS_MORETOCOME = 0x4000
SS_BLOCKED = 0x8000
SOCKET_MAXDATA = 4096*64 ; must be 4096*(power of 2) where 'power of 2' is at least 8
MAX_backlog = 20 ; maximum backlog for stream sockets
; Error Codes
ENOBUFS = 1
EINPROGRESS = 2
EOPNOTSUPP = 4
EWOULDBLOCK = 6
ENOTCONN = 9
EALREADY = 10
EINVAL = 11
EMSGSIZE = 12
ENOMEM = 18
EADDRINUSE = 20
ECONNREFUSED = 61
ECONNRESET = 52
EISCONN = 56
ETIMEDOUT = 60
ECONNABORTED = 53
; Api protocol numbers
API_ETH = 0
API_IPv4 = 1
API_ICMP = 2
API_UDP = 3
API_TCP = 4
API_ARP = 5
API_PPPOE = 6
API_IPv6 = 7
; Network device types
NET_DEVICE_LOOPBACK = 0
NET_DEVICE_ETH = 1
NET_DEVICE_SLIP = 2
; Network link types (link protocols)
NET_LINK_LOOPBACK = 0 ;;; Really a link type?
NET_LINK_MAC = 1 ; Media access control (ethernet, isdn, ...)
NET_LINK_PPP = 2 ; Point to Point Protocol (PPPoE, ...)
NET_LINK_IEEE802.11 = 3 ; IEEE 802.11 (WiFi)
; Hardware acceleration bits
NET_HWACC_TCP_IPv4_IN = 1 shl 0
NET_HWACC_TCP_IPv4_OUT = 1 shl 1
struct NET_DEVICE
device_type dd ? ; Type field
mtu dd ? ; Maximal Transmission Unit
name dd ? ; Ptr to 0 terminated string
unload dd ? ; Ptrs to driver functions
reset dd ? ;
transmit dd ? ;
bytes_tx dq ? ; Statistics, updated by the driver
bytes_rx dq ? ;
packets_tx dd ? ;
packets_rx dd ? ;
link_state dd ? ; link state (0 = no link)
hwacc dd ? ; bitmask stating enabled HW accelerations (offload engines)
ends
; Exactly as it says..
macro pseudo_random reg {
add reg, [esp]
rol reg, 5
xor reg, [timer_ticks]
; add reg, [CPU_FREQ]
imul reg, 214013
xor reg, 0xdeadbeef
rol reg, 9
}
; Network to Hardware byte order (dword)
macro ntohd reg {
rol word reg, 8
rol dword reg, 16
rol word reg , 8
}
; Network to Hardware byte order (word)
macro ntohw reg {
rol word reg, 8
}
include "queue.inc"
include "loopback.inc"
include "ethernet.inc"
include "PPPoE.inc"
include "ARP.inc"
include "IPv4.inc"
include "IPv6.inc"
include "icmp.inc"
include "udp.inc"
include "tcp.inc"
include "socket.inc"
uglobal
align 4
NET_RUNNING dd ?
NET_DRV_LIST rd NET_DEVICES_MAX
endg
;-----------------------------------------------------------------
;
; stack_init
;
; This function calls all network init procedures
;
; IN: /
; OUT: /
;
;-----------------------------------------------------------------
align 4
stack_init:
; Init the network drivers list
xor eax, eax
mov edi, NET_RUNNING
mov ecx, (NET_DEVICES_MAX + 2)
rep stosd
ETH_init
PPPoE_init
IPv4_init
; IPv6_init
ICMP_init
ARP_init
UDP_init
TCP_init
SOCKET_init
LOOP_init
mov [net_tmr_count], 0
ret
; Wakeup every tick.
proc stack_handler_has_work?
mov eax, [timer_ticks]
cmp eax, [net_10ms]
ret
endp
;-----------------------------------------------------------------
;
; stack_handler
;
; This function is called in kernel loop
;
; IN: /
; OUT: /
;
;-----------------------------------------------------------------
align 4
stack_handler:
; Test for 10ms tick
mov eax, [timer_ticks]
cmp eax, [net_10ms]
je .exit
mov [net_10ms], eax
cmp [NET_RUNNING], 0
je .exit
test [net_10ms], 0x0f ; 160ms
jnz .exit
TCP_timer_160ms
test [net_10ms], 0x3f ; 640ms
jnz .exit
ARP_decrease_entry_ttls
IPv4_decrease_fragment_ttls
xor edx, edx
mov eax, [TCP_timer1_event]
mov ebx, [eax + EVENT.id]
xor esi, esi
call raise_event
.exit:
ret
align 4
NET_packet_free:
and dword[esp+4], not 0xfff
jmp kernel_free
align 4
NET_link_changed:
DEBUGF DEBUG_NETWORK_VERBOSE, "NET_link_changed device=0x%x status=0x%x\n", ebx, [ebx + NET_DEVICE.link_state]
align 4
NET_send_event:
DEBUGF DEBUG_NETWORK_VERBOSE, "NET_send_event\n"
; Send event to all applications
push edi ecx
mov edi, SLOT_BASE
mov ecx, [TASK_COUNT]
.loop:
add edi, 256
or [edi + APPDATA.event_mask], EVENT_NETWORK2
loop .loop
pop ecx edi
ret
;-----------------------------------------------------------------
;
; NET_add_device:
;
; This function is called by the network drivers,
; to register each running NIC to the kernel
;
; IN: Pointer to device structure in ebx
; OUT: Device num in eax, -1 on error
;
;-----------------------------------------------------------------
align 4
NET_add_device:
DEBUGF DEBUG_NETWORK_VERBOSE, "NET_Add_Device: %x\n", ebx ;;; TODO: use mutex to lock net device list
cmp [NET_RUNNING], NET_DEVICES_MAX
jae .error
;----------------------------------
; Check if device is already listed
mov eax, ebx
mov ecx, NET_DEVICES_MAX ; We need to check whole list because a device may be removed without re-organizing list
mov edi, NET_DRV_LIST
repne scasd ; See if device is already in the list
jz .error
;----------------------------
; Find empty slot in the list
xor eax, eax
mov ecx, NET_DEVICES_MAX
mov edi, NET_DRV_LIST
repne scasd
jnz .error
sub edi, 4
;-----------------------------
; Add device to the found slot
mov [edi], ebx ; add device to list
mov eax, edi ; Calculate device number in eax
sub eax, NET_DRV_LIST
shr eax, 2
inc [NET_RUNNING] ; Indicate that one more network device is up and running
call NET_send_event
DEBUGF DEBUG_NETWORK_VERBOSE, "Device number: %u\n", eax
ret
.error:
or eax, -1
DEBUGF DEBUG_NETWORK_ERROR, "Adding network device failed\n"
ret
;-----------------------------------------------------------------
;
; NET_Remove_Device:
;
; This function is called by network drivers,
; to unregister network devices from the kernel
;
; IN: Pointer to device structure in ebx
; OUT: eax: -1 on error
;
;-----------------------------------------------------------------
align 4
NET_remove_device:
cmp [NET_RUNNING], 0
je .error
;----------------------------
; Find the driver in the list
mov eax, ebx
mov ecx, NET_DEVICES_MAX
mov edi, NET_DRV_LIST
repne scasd
jnz .error
;------------------------
; Remove it from the list
xor eax, eax
mov dword [edi-4], eax
dec [NET_RUNNING]
call NET_send_event
xor eax, eax
ret
.error:
or eax, -1
ret
;-----------------------------------------------------------------
;
; NET_ptr_to_num
;
; IN: ebx = ptr to device struct
; OUT: edi = -1 on error, device number otherwise
;
;-----------------------------------------------------------------
align 4
NET_ptr_to_num:
call NET_ptr_to_num4
ror edi, 2 ; If -1, stay -1
; valid device numbers have last two bits 0, so do just shr
ret
align 4
NET_ptr_to_num4: ; Todo, place number in device structure so we only need to verify?
push ecx
mov ecx, NET_DEVICES_MAX
mov edi, NET_DRV_LIST
.loop:
cmp ebx, [edi]
je .found
add edi, 4
dec ecx
jnz .loop
or edi, -1
pop ecx
ret
.found:
sub edi, NET_DRV_LIST
pop ecx
ret
;-----------------------------------------------------------------
;
; checksum_1
;
; This is the first of two functions needed to calculate a checksum.
;
; IN: edx = start offset for semi-checksum
; esi = pointer to data
; ecx = data size
; OUT: edx = semi-checksum
;
;
; Code was optimized by diamond
;
;-----------------------------------------------------------------
align 4
checksum_1:
shr ecx, 1
pushf
jz .no_2
shr ecx, 1
pushf
jz .no_4
shr ecx, 1
pushf
jz .no_8
.loop:
add dl, [esi+1]
adc dh, [esi+0]
adc dl, [esi+3]
adc dh, [esi+2]
adc dl, [esi+5]
adc dh, [esi+4]
adc dl, [esi+7]
adc dh, [esi+6]
adc edx, 0
add esi, 8
dec ecx
jnz .loop
adc edx, 0
.no_8:
popf
jnc .no_4
add dl, [esi+1]
adc dh, [esi+0]
adc dl, [esi+3]
adc dh, [esi+2]
adc edx, 0
add esi, 4
.no_4:
popf
jnc .no_2
add dl, [esi+1]
adc dh, [esi+0]
adc edx, 0
inc esi
inc esi
.no_2:
popf
jnc .end
add dh, [esi+0]
adc edx, 0
.end:
ret
;-----------------------------------------------------------------
;
; checksum_2
;
; This function calculates the final ip/tcp/udp checksum for you
;
; IN: edx = semi-checksum
; OUT: dx = checksum (in INET byte order)
;
;-----------------------------------------------------------------
align 4
checksum_2:
mov ecx, edx
shr ecx, 16
and edx, 0xffff
add edx, ecx
mov ecx, edx
shr ecx, 16
add dx, cx
test dx, dx ; it seems that ZF is not set when CF is set :(
not dx
jnz .not_zero
dec dx
.not_zero:
xchg dl, dh
DEBUGF DEBUG_NETWORK_VERBOSE, "Checksum: %x\n", dx
ret
;----------------------------------------------------------------
;
; System function to work with network devices (74)
;
;----------------------------------------------------------------
align 4
sys_network:
cmp bl, 255
jne @f
mov eax, [NET_RUNNING]
mov [esp+32], eax
ret
@@:
cmp bh, NET_DEVICES_MAX ; Check if device number exists
jae .doesnt_exist
mov esi, ebx
and esi, 0x0000ff00
shr esi, 6
cmp dword [esi + NET_DRV_LIST], 0 ; check if driver is running
je .doesnt_exist
mov eax, [esi + NET_DRV_LIST]
and ebx, 0x000000ff
cmp ebx, .number
ja .doesnt_exist
jmp dword [.table + 4*ebx]
.table:
dd .get_type ; 0
dd .get_dev_name ; 1
dd .reset ; 2
dd .stop ; 3
dd .get_ptr ; 4
dd .get_drv_name ; 5
dd .packets_tx ; 6
dd .packets_rx ; 7
dd .bytes_tx ; 8
dd .bytes_rx ; 9
dd .state ; 10
.number = ($ - .table) / 4 - 1
.get_type:
mov eax, [eax + NET_DEVICE.device_type]
mov [esp+32], eax
ret
.get_dev_name:
mov esi, [eax + NET_DEVICE.name]
mov edi, ecx
mov ecx, 64/4 ; max length
rep movsd
xor eax, eax
mov [esp+32], eax
ret
.reset:
call [eax + NET_DEVICE.reset]
mov [esp+32], eax
ret
.stop:
call [eax + NET_DEVICE.unload]
mov [esp+32], eax
ret
.get_ptr:
mov [esp+32], eax
ret
.get_drv_name:
xor eax, eax
mov [esp+32], eax
ret
.packets_tx:
mov eax, [eax + NET_DEVICE.packets_tx]
mov [esp+32], eax
ret
.packets_rx:
mov eax, [eax + NET_DEVICE.packets_rx]
mov [esp+32], eax
ret
.bytes_tx:
mov ebx, dword [eax + NET_DEVICE.bytes_tx + 4]
mov [esp+20], ebx
mov eax, dword [eax + NET_DEVICE.bytes_tx]
mov [esp+32], eax
ret
.bytes_rx:
mov ebx, dword [eax + NET_DEVICE.bytes_rx + 4]
mov [esp+20], ebx
mov eax, dword [eax + NET_DEVICE.bytes_rx]
mov [esp+32], eax
ret
.state:
mov eax, [eax + NET_DEVICE.link_state]
mov [esp+32], eax
ret
.doesnt_exist:
mov dword[esp+32], -1
ret
;----------------------------------------------------------------
;
; System function to work with protocols (76)
;
;----------------------------------------------------------------
align 4
sys_protocols:
cmp bh, NET_DEVICES_MAX ; Check if device number exists
jae .doesnt_exist
mov esi, ebx
and esi, 0x0000ff00
shr esi, 6 ; now we have the device num * 4 in esi
cmp [esi + NET_DRV_LIST], 0 ; check if driver is running
je .doesnt_exist
push .return ; return address (we will be using jumps instead of calls)
mov eax, ebx ; set ax to protocol number
shr eax, 16 ;
cmp ax, API_ETH
je ETH_api
cmp ax, API_IPv4
je IPv4_api
cmp ax, API_ICMP
je ICMP_api
cmp ax, API_UDP
je UDP_api
cmp ax, API_TCP
je TCP_api
cmp ax, API_ARP
je ARP_api
cmp ax, API_PPPOE
je PPPoE_api
cmp ax, API_IPv6
je IPv6_api
add esp, 4 ; if we reached here, no function was called, so we need to balance stack
.doesnt_exist:
mov eax, -1
.return:
mov [esp+28+4], eax ; return eax value to the program
ret