kolibrios-gitea/kernel/branches/kolibri-ahci/network/PPPoE.inc

347 lines
11 KiB
PHP
Raw Normal View History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2012-2019. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; PPPoE.INC ;;
;; ;;
;; Part of the tcp/ip network stack for KolibriOS ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
struct PPPoE_frame
VersionAndType db ?
Code db ?
SessionID dw ?
Length dw ? ; Length of payload, does NOT include the length PPPoE header.
Payload rb 0
ends
uglobal
align 4
PPPoE_SID dw ?
PPPoE_MAC dp ?
endg
;-----------------------------------------------------------------;
; ;
; pppoe_init: Reset all pppoe variables ;
; ;
;-----------------------------------------------------------------;
macro pppoe_init {
call pppoe_stop_connection
}
;-----------------------------------------------------------------;
; ;
; pppoe_discovery_input ;
; ;
; IN: [esp] = ptr to buffer ;
; [esp+4] = size of buffer ;
; ebx = ptr to device struct ;
; ecx = size of PPP packet ;
; edx = ptr to PPP header ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
pppoe_discovery_input:
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_discovery_input\n"
; First, find open PPPoE socket
pusha
mov ecx, socket_mutex
call mutex_lock
popa
mov eax, net_sockets
.next_socket:
mov eax, [eax + SOCKET.NextPtr]
or eax, eax
jz .dump
cmp [eax + SOCKET.Domain], AF_PPP
jne .next_socket
cmp [eax + SOCKET.Protocol], PPP_PROTO_ETHERNET
jne .next_socket
pusha
mov ecx, socket_mutex
call mutex_unlock
popa
; Now, send it to the this socket
mov ecx, [esp + 4]
mov esi, [esp]
jmp socket_input
.dump:
pusha
mov ecx, socket_mutex
call mutex_unlock
popa
DEBUGF DEBUG_NETWORK_VERBOSE, 'PPPoE_discovery_input: dumping\n'
call net_buff_free
ret
;-----------------------------------------------------------------;
; ;
; pppoe_discovery_output ;
; ;
; IN: eax = socket pointer ;
; ecx = number of bytes to send ;
; esi = pointer to data ;
; ;
;-----------------------------------------------------------------;
align 4
pppoe_discovery_output:
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_discovery_output: socket=%x buffer=%x size=%d\n", eax, esi, ecx
; RFC2516: An entire PADI packet (including the PPPoE header) MUST NOT
; exceed 1484 octets.
cmp ecx, 1484 + 14
ja .bad
; Check that device exists and is ethernet device
mov ebx, [eax + SOCKET.device]
cmp ebx, NET_DEVICES_MAX
ja .bad
mov ebx, [net_device_list + 4*ebx]
test ebx, ebx
jz .bad
cmp [ebx + NET_DEVICE.device_type], NET_DEVICE_ETH
jne .bad
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_discovery_output: device=%x\n", ebx
; Create packet.
push ecx esi
;;;; FIXME stdcall kernel_alloc, 1500
pop esi ecx
test eax, eax
jz .bad
mov edx, ecx
mov edi, eax
rep movsb
cmp edx, 60 ; Min ETH size
ja @f
mov edx, 60
@@:
push edx eax ; size and packet ptr for driver send proc
; Overwrite source MAC and protocol type
lea edi, [eax + ETH_header.SrcMAC]
lea esi, [ebx + ETH_DEVICE.mac]
movsd
movsw
cmp word[edi], ETHER_PROTO_PPP_SESSION ; Allow only PPP_discovery, or LCP
je @f
mov ax, ETHER_PROTO_PPP_DISCOVERY
stosw
@@:
; And send the packet
call [ebx + NET_DEVICE.transmit]
xor eax, eax
ret
.bad:
or eax, -1
ret
;-----------------------------------------------------------------;
; ;
; pppoe_session_input ;
; ;
; IN: [esp] = ptr to buffer ;
; [esp+4] = size of buffer ;
; ebx = ptr to device struct ;
; edx = ptr to PPP header ;
; ecx = size of PPP packet ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
pppoe_session_input:
cmp [edx + PPPoE_frame.VersionAndType], 0x11
jne .dump
cmp [edx + PPPoE_frame.Code], 0x00
jne .dump
movzx ecx, [edx + PPPoE_frame.Length]
xchg cl, ch
mov ax, [edx + PPPoE_frame.SessionID]
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_input: session ID=%x, length=%u\n", ax, cx
cmp ax, [PPPoE_SID]
jne .dump
mov ax, word [edx + PPPoE_frame.Payload]
add edx, PPPoE_frame.Payload + 2
cmp ax, PPP_PROTO_IPv4
je ipv4_input
; cmp ax, PPP_PROTO_IPv6
; je ipv6_input
jmp pppoe_discovery_input ; Send LCP,CHAP,CBCP,... packets to the PPP dialer
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_input: Unknown protocol=%x\n", ax
.dump:
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_input: dumping\n"
call net_buff_free
ret
;-----------------------------------------------------------------;
; ;
; pppoe_output ;
; ;
; IN: ax = protocol ;
; ebx = device ptr ;
; ecx = packet size ;
; ;
; OUT: eax = buffer start ;
; eax = 0 on error ;
; ebx = device ptr ;
; ecx = packet size ;
; edx = size of complete buffer ;
; edi = start of PPP payload ;
; ;
;-----------------------------------------------------------------;
align 4
pppoe_output:
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_output: size=%u device=%x\n", ecx, ebx
pushw ax
pushw [PPPoE_SID]
mov ax, ETHER_PROTO_PPP_SESSION
add ecx, PPPoE_frame.Payload + 2
lea edx, [PPPoE_MAC]
call eth_output
jz .eth_error
sub ecx, PPPoE_frame.Payload
mov [edi + PPPoE_frame.VersionAndType], 0x11
mov [edi + PPPoE_frame.Code], 0
popw [edi + PPPoE_frame.SessionID]
xchg cl, ch
mov [edi + PPPoE_frame.Length], cx
xchg cl, ch
pop word [edi + PPPoE_frame.Payload]
sub ecx, 2
add edi, PPPoE_frame.Payload + 2
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_output: success!\n"
ret
.eth_error:
add esp, 4
xor eax, eax
ret
align 4
pppoe_start_connection:
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_start_connection: %x\n", cx
cmp [PPPoE_SID], 0
jne .fail
mov [PPPoE_SID], cx
mov dword [PPPoE_MAC], edx
mov word [PPPoE_MAC + 4], si
xor eax, eax
ret
.fail:
or eax, -1
ret
align 4
pppoe_stop_connection:
DEBUGF DEBUG_NETWORK_VERBOSE, "PPPoE_stop_connection\n"
xor eax, eax
mov [PPPoE_SID], ax
mov dword [PPPoE_MAC], eax
mov word [PPPoE_MAC + 4], ax
ret
;-----------------------------------------------------------------;
; ;
; pppoe_api: Part of system function 76 ;
; ;
; IN: subfunction number in bl ;
; device number in bh ;
; ecx, edx, .. depends on subfunction ;
; ;
; OUT: ;
; ;
;-----------------------------------------------------------------;
align 4
pppoe_api:
movzx eax, bh
shl eax, 2
and ebx, 0xff
cmp ebx, .number
ja .error
jmp dword [.table + 4*ebx]
.table:
dd pppoe_start_connection ; 0
dd pppoe_stop_connection ; 1
.number = ($ - .table) / 4 - 1
.error:
mov eax, -1
ret