kolibrios-gitea/kernel/trunk/network/eth_drv/drivers/rtl8169.inc

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                                 ;;
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved.    ;;
;; Distributed under terms of the GNU General Public License       ;;
;;                                                                 ;;
;;  RTL8169.INC                                                    ;;
;;                                                                 ;;
;;  Ethernet driver for Menuet OS                                  ;;
;;                                                                 ;;
;;  Version 0.1  11 February 2007                                  ;;
;;                                                                 ;;
;;  Driver for chips of RealTek 8169 family                        ;;
;;  References:                                                    ;;
;;    r8169.c - linux driver (etherboot project)                   ;;
;;    ethernet driver template by Mike Hibbett                     ;;
;;                                                                 ;;
;;  The copyright statement is                                     ;;
;;                                                                 ;;
;;          GNU GENERAL PUBLIC LICENSE                             ;;
;;             Version 2, June 1991                                ;;
;;                                                                 ;;
;;  Copyright 2007 mike.dld,                                       ;;
;;   mike.dld@gmail.com                                            ;;
;;                                                                 ;;
;;  See file COPYING for details                                   ;;
;;                                                                 ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

$Revision$


	ETH_ALEN	       equ 6
	ETH_HLEN	       equ (2 * ETH_ALEN + 2)
	ETH_ZLEN	       equ 60 ; 60 + 4bytes auto payload for
				      ; mininmum 64bytes frame length

	RTL8169_REG_MAC0	       equ 0x0 ; Ethernet hardware address
	RTL8169_REG_MAR0	       equ 0x8 ; Multicast filter
	RTL8169_REG_TxDescStartAddr    equ 0x20
	RTL8169_REG_TxHDescStartAddr   equ 0x28
	RTL8169_REG_FLASH	       equ 0x30
	RTL8169_REG_ERSR	       equ 0x36
	RTL8169_REG_ChipCmd	       equ 0x37
	RTL8169_REG_TxPoll	       equ 0x38
	RTL8169_REG_IntrMask	       equ 0x3C
	RTL8169_REG_IntrStatus	       equ 0x3E
	RTL8169_REG_TxConfig	       equ 0x40
	RTL8169_REG_RxConfig	       equ 0x44
	RTL8169_REG_RxMissed	       equ 0x4C
	RTL8169_REG_Cfg9346	       equ 0x50
	RTL8169_REG_Config0	       equ 0x51
	RTL8169_REG_Config1	       equ 0x52
	RTL8169_REG_Config2	       equ 0x53
	RTL8169_REG_Config3	       equ 0x54
	RTL8169_REG_Config4	       equ 0x55
	RTL8169_REG_Config5	       equ 0x56
	RTL8169_REG_MultiIntr	       equ 0x5C
	RTL8169_REG_PHYAR	       equ 0x60
	RTL8169_REG_TBICSR	       equ 0x64
	RTL8169_REG_TBI_ANAR	       equ 0x68
	RTL8169_REG_TBI_LPAR	       equ 0x6A
	RTL8169_REG_PHYstatus	       equ 0x6C
	RTL8169_REG_RxMaxSize	       equ 0xDA
	RTL8169_REG_CPlusCmd	       equ 0xE0
	RTL8169_REG_RxDescStartAddr    equ 0xE4
	RTL8169_REG_ETThReg	       equ 0xEC
	RTL8169_REG_FuncEvent	       equ 0xF0
	RTL8169_REG_FuncEventMask      equ 0xF4
	RTL8169_REG_FuncPresetState    equ 0xF8
	RTL8169_REG_FuncForceEvent     equ 0xFC

	; InterruptStatusBits
	RTL8169_ISB_SYSErr	       equ 0x8000
	RTL8169_ISB_PCSTimeout	       equ 0x4000
	RTL8169_ISB_SWInt	       equ 0x0100
	RTL8169_ISB_TxDescUnavail      equ 0x80
	RTL8169_ISB_RxFIFOOver	       equ 0x40
	RTL8169_ISB_LinkChg	       equ 0x20
	RTL8169_ISB_RxOverflow	       equ 0x10
	RTL8169_ISB_TxErr	       equ 0x08
	RTL8169_ISB_TxOK	       equ 0x04
	RTL8169_ISB_RxErr	       equ 0x02
	RTL8169_ISB_RxOK	       equ 0x01

	; RxStatusDesc
	RTL8169_SD_RxRES	       equ 0x00200000
	RTL8169_SD_RxCRC	       equ 0x00080000
	RTL8169_SD_RxRUNT	       equ 0x00100000
	RTL8169_SD_RxRWT	       equ 0x00400000

	; ChipCmdBits
	RTL8169_CMD_Reset	       equ 0x10
	RTL8169_CMD_RxEnb	       equ 0x08
	RTL8169_CMD_TxEnb	       equ 0x04
	RTL8169_CMD_RxBufEmpty	       equ 0x01

	; Cfg9346Bits
	RTL8169_CFG_9346_Lock	       equ 0x00
	RTL8169_CFG_9346_Unlock        equ 0xC0

	; rx_mode_bits
	RTL8169_RXM_AcceptErr	       equ 0x20
	RTL8169_RXM_AcceptRunt	       equ 0x10
	RTL8169_RXM_AcceptBroadcast    equ 0x08
	RTL8169_RXM_AcceptMulticast    equ 0x04
	RTL8169_RXM_AcceptMyPhys       equ 0x02
	RTL8169_RXM_AcceptAllPhys      equ 0x01

	; RxConfigBits
	RTL8169_RXC_FIFOShift	       equ 13
	RTL8169_RXC_DMAShift	       equ 8

	; TxConfigBits
	RTL8169_TXC_InterFrameGapShift equ 24
	RTL8169_TXC_DMAShift	       equ 8	; DMA burst value (0-7) is shift this many bits

	; rtl8169_PHYstatus
	RTL8169_PHYS_TBI_Enable        equ 0x80
	RTL8169_PHYS_TxFlowCtrl        equ 0x40
	RTL8169_PHYS_RxFlowCtrl        equ 0x20
	RTL8169_PHYS_1000bpsF	       equ 0x10
	RTL8169_PHYS_100bps	       equ 0x08
	RTL8169_PHYS_10bps	       equ 0x04
	RTL8169_PHYS_LinkStatus        equ 0x02
	RTL8169_PHYS_FullDup	       equ 0x01

	; GIGABIT_PHY_registers
	RTL8169_PHY_CTRL_REG	       equ 0
	RTL8169_PHY_STAT_REG	       equ 1
	RTL8169_PHY_AUTO_NEGO_REG      equ 4
	RTL8169_PHY_1000_CTRL_REG      equ 9

	; GIGABIT_PHY_REG_BIT
	RTL8169_PHY_Restart_Auto_Nego  equ 0x0200
	RTL8169_PHY_Enable_Auto_Nego   equ 0x1000

	; PHY_STAT_REG = 1;
	RTL8169_PHY_Auto_Neco_Comp     equ 0x0020

	; PHY_AUTO_NEGO_REG = 4;
	RTL8169_PHY_Cap_10_Half        equ 0x0020
	RTL8169_PHY_Cap_10_Full        equ 0x0040
	RTL8169_PHY_Cap_100_Half       equ 0x0080
	RTL8169_PHY_Cap_100_Full       equ 0x0100

	; PHY_1000_CTRL_REG = 9;
	RTL8169_PHY_Cap_1000_Full      equ 0x0200
	RTL8169_PHY_Cap_1000_Half      equ 0x0100

	RTL8169_PHY_Cap_PAUSE	       equ 0x0400
	RTL8169_PHY_Cap_ASYM_PAUSE     equ 0x0800

	RTL8169_PHY_Cap_Null	       equ 0x0

	; _MediaType
	RTL8169_MT_10_Half	       equ 0x01
	RTL8169_MT_10_Full	       equ 0x02
	RTL8169_MT_100_Half	       equ 0x04
	RTL8169_MT_100_Full	       equ 0x08
	RTL8169_MT_1000_Full	       equ 0x10

	; _TBICSRBit
	RTL8169_TBI_LinkOK	       equ 0x02000000

	; _DescStatusBit
	RTL8169_DSB_OWNbit	       equ 0x80000000
	RTL8169_DSB_EORbit	       equ 0x40000000
	RTL8169_DSB_FSbit	       equ 0x20000000
	RTL8169_DSB_LSbit	       equ 0x10000000

; MAC address length
MAC_ADDR_LEN	    equ 6

; max supported gigabit ethernet frame size -- must be at least (dev->mtu+14+4)
MAX_ETH_FRAME_SIZE  equ 1536

TX_FIFO_THRESH	    equ 256	; In bytes

RX_FIFO_THRESH	    equ 7	; 7 means NO threshold, Rx buffer level before first PCI xfer
RX_DMA_BURST	    equ 7	; Maximum PCI burst, '6' is 1024
TX_DMA_BURST	    equ 7	; Maximum PCI burst, '6' is 1024
ETTh		    equ 0x3F	; 0x3F means NO threshold

EarlyTxThld	    equ 0x3F	; 0x3F means NO early transmit
RxPacketMaxSize     equ 0x0800	; Maximum size supported is 16K-1
InterFrameGap	    equ 0x03	; 3 means InterFrameGap = the shortest one

NUM_TX_DESC	    equ 1	; Number of Tx descriptor registers
NUM_RX_DESC	    equ 4	; Number of Rx descriptor registers
RX_BUF_SIZE	    equ 1536	; Rx Buffer size

HZ		    equ 1000

RTL_MIN_IO_SIZE     equ 0x80
TX_TIMEOUT	    equ (6*HZ)

RTL8169_TIMER_EXPIRE_TIME equ 100

ETH_HDR_LEN	    equ 14
DEFAULT_MTU	    equ 1500
DEFAULT_RX_BUF_LEN  equ 1536


;#ifdef RTL8169_JUMBO_FRAME_SUPPORT
;#define MAX_JUMBO_FRAME_MTU    ( 10000 )
;#define MAX_RX_SKBDATA_SIZE    ( MAX_JUMBO_FRAME_MTU + ETH_HDR_LEN )
;#else
MAX_RX_SKBDATA_SIZE equ 1600
;#endif                         //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT

;#ifdef RTL8169_USE_IO
;!!!#define RTL_W8(reg, val8)   outb ((val8), ioaddr + (reg))
macro RTL_W8 reg,val8 {
  if ~reg eq dx
    mov dx,word[rtl8169_tpc.mmio_addr]
    add dx,reg
  end if
  if ~val8 eq al
    mov al,val8
  end if
  out dx,al
}
;!!!#define RTL_W16(reg, val16) outw ((val16), ioaddr + (reg))
macro RTL_W16 reg,val16 {
  if ~reg eq dx
    mov dx,word[rtl8169_tpc.mmio_addr]
    add dx,reg
  end if
  if ~val16 eq ax
    mov ax,val16
  end if
  out dx,ax
}
;!!!#define RTL_W32(reg, val32) outl ((val32), ioaddr + (reg))
macro RTL_W32 reg,val32 {
  if ~reg eq dx
    mov dx,word[rtl8169_tpc.mmio_addr]
    add dx,reg
  end if
  if ~val32 eq eax
    mov eax,val32
  end if
  out dx,eax
}
;!!!#define RTL_R8(reg)         inb (ioaddr + (reg))
macro RTL_R8 reg {
  if ~reg eq dx
    mov dx,word[rtl8169_tpc.mmio_addr]
    add dx,reg
  end if
  in  al,dx
}
;!!!#define RTL_R16(reg)        inw (ioaddr + (reg))
macro RTL_R16 reg {
  if ~reg eq dx
    mov dx,word[rtl8169_tpc.mmio_addr]
    add dx,reg
  end if
  in  ax,dx
}
;!!!#define RTL_R32(reg)        ((unsigned long) inl (ioaddr + (reg)))
macro RTL_R32 reg {
  if ~reg eq dx
    mov dx,word[rtl8169_tpc.mmio_addr]
    add dx,reg
  end if
  in  eax,dx
}
;#else
; write/read MMIO register
;#define RTL_W8(reg, val8)      writeb ((val8), ioaddr + (reg))
;#define RTL_W16(reg, val16)    writew ((val16), ioaddr + (reg))
;#define RTL_W32(reg, val32)    writel ((val32), ioaddr + (reg))
;#define RTL_R8(reg)            readb (ioaddr + (reg))
;#define RTL_R16(reg)           readw (ioaddr + (reg))
;#define RTL_R32(reg)           ((unsigned long) readl (ioaddr + (reg)))
;#endif

MCFG_METHOD_01	     equ 0x01
MCFG_METHOD_02	     equ 0x02
MCFG_METHOD_03	     equ 0x03
MCFG_METHOD_04	     equ 0x04
MCFG_METHOD_05	     equ 0x05
MCFG_METHOD_11	     equ 0x0b
MCFG_METHOD_12	     equ 0x0c
MCFG_METHOD_13	     equ 0x0d
MCFG_METHOD_14	     equ 0x0e
MCFG_METHOD_15	     equ 0x0f

PCFG_METHOD_1	    equ 0x01	; PHY Reg 0x03 bit0-3 == 0x0000
PCFG_METHOD_2	    equ 0x02	; PHY Reg 0x03 bit0-3 == 0x0001
PCFG_METHOD_3	    equ 0x03	; PHY Reg 0x03 bit0-3 == 0x0002

PCI_COMMAND_IO		equ 0x1   ; Enable response in I/O space
PCI_COMMAND_MEM 	equ 0x2   ; Enable response in mem space
PCI_COMMAND_MASTER	equ 0x4   ; Enable bus mastering
PCI_LATENCY_TIMER	equ 0x0d  ; 8 bits
PCI_COMMAND_SPECIAL	equ 0x8   ; Enable response to special cycles
PCI_COMMAND_INVALIDATE	equ 0x10  ; Use memory write and invalidate
PCI_COMMAND_VGA_PALETTE equ 0x20  ; Enable palette snooping
PCI_COMMAND_PARITY	equ 0x40  ; Enable parity checking
PCI_COMMAND_WAIT	equ 0x80  ; Enable address/data stepping
PCI_COMMAND_SERR	equ 0x100 ; Enable SERR
PCI_COMMAND_FAST_BACK	equ 0x200 ; Enable back-to-back writes

struc rtl8169_TxDesc {
  .status    dd ?
  .vlan_tag  dd ?
  .buf_addr  dd ?
  .buf_Haddr dd ?
}
virtual at 0
  rtl8169_TxDesc rtl8169_TxDesc
  sizeof.rtl8169_TxDesc = $ - rtl8169_TxDesc
end virtual

struc rtl8169_RxDesc {
  .status    dd ?
  .vlan_tag  dd ?
  .buf_addr  dd ?
  .buf_Haddr dd ?
}
virtual at 0
  rtl8169_RxDesc rtl8169_RxDesc
  sizeof.rtl8169_RxDesc = $ - rtl8169_RxDesc
end virtual

virtual at eth_data_start

; Define the TX Descriptor
align 256
rtl8169_tx_ring rb NUM_TX_DESC * sizeof.rtl8169_TxDesc

; Create a static buffer of size RX_BUF_SZ for each
; TX Descriptor.  All descriptors point to a
; part of this buffer
align 256
rtl8169_txb rb NUM_TX_DESC * RX_BUF_SIZE

; Define the RX Descriptor
align 256
rtl8169_rx_ring rb NUM_RX_DESC * sizeof.rtl8169_RxDesc

; Create a static buffer of size RX_BUF_SZ for each
; RX Descriptor   All descriptors point to a
; part of this buffer
align 256
rtl8169_rxb rb NUM_RX_DESC * RX_BUF_SIZE

rtl8169_tpc:
  .mmio_addr	dd ? ; memory map physical address
  .chipset	dd ?
  .pcfg 	dd ?
  .mcfg 	dd ?
  .cur_rx	dd ? ; Index into the Rx descriptor buffer of next Rx pkt
  .cur_tx	dd ? ; Index into the Tx descriptor buffer of next Rx pkt
  .TxDescArrays dd ? ; Index of Tx Descriptor buffer
  .RxDescArrays dd ? ; Index of Rx Descriptor buffer
  .TxDescArray	dd ? ; Index of 256-alignment Tx Descriptor buffer
  .RxDescArray	dd ? ; Index of 256-alignment Rx Descriptor buffer
  .RxBufferRing rd NUM_RX_DESC ; Index of Rx Buffer array
  .Tx_skbuff	rd NUM_TX_DESC

end virtual

rtl8169_intr_mask = RTL8169_ISB_LinkChg or RTL8169_ISB_RxOverflow or RTL8169_ISB_RxFIFOOver or RTL8169_ISB_TxErr or RTL8169_ISB_TxOK or RTL8169_ISB_RxErr or RTL8169_ISB_RxOK
rtl8169_rx_config = (RX_FIFO_THRESH shl RTL8169_RXC_FIFOShift) or (RX_DMA_BURST shl RTL8169_RXC_DMAShift) or 0x0000000E

iglobal

;static struct {
;       const char *name;
;       u8 mcfg;                /* depend on RTL8169 docs */
;       u32 RxConfigMask;       /* should clear the bits supported by this chip */
;}
rtl_chip_info dd \
  MCFG_METHOD_01, 0xff7e1880, \ ; RTL8169
  MCFG_METHOD_02, 0xff7e1880, \ ; RTL8169s/8110s
  MCFG_METHOD_03, 0xff7e1880, \ ; RTL8169s/8110s
  MCFG_METHOD_04, 0xff7e1880, \ ; RTL8169sb/8110sb
  MCFG_METHOD_05, 0xff7e1880, \ ; RTL8169sc/8110sc
  MCFG_METHOD_11, 0xff7e1880, \ ; RTL8168b/8111b   // PCI-E
  MCFG_METHOD_12, 0xff7e1880, \ ; RTL8168b/8111b   // PCI-E
  MCFG_METHOD_13, 0xff7e1880, \ ; RTL8101e         // PCI-E 8139
  MCFG_METHOD_14, 0xff7e1880, \ ; RTL8100e         // PCI-E 8139
  MCFG_METHOD_15, 0xff7e1880	; RTL8100e         // PCI-E 8139

mac_info dd \
  0x38800000, MCFG_METHOD_15, \
  0x38000000, MCFG_METHOD_12, \
  0x34000000, MCFG_METHOD_13, \
  0x30800000, MCFG_METHOD_14, \
  0x30000000, MCFG_METHOD_11, \
  0x18000000, MCFG_METHOD_05, \
  0x10000000, MCFG_METHOD_04, \
  0x04000000, MCFG_METHOD_03, \
  0x00800000, MCFG_METHOD_02, \
  0x00000000, MCFG_METHOD_01	; catch-all

endg

PCI_COMMAND_IO		equ 0x1    ; Enable response in I/O space
PCI_COMMAND_MEM 	equ 0x2    ; Enable response in mem space
PCI_COMMAND_MASTER	equ 0x4    ; Enable bus mastering
PCI_LATENCY_TIMER	equ 0x0d   ; 8 bits
PCI_COMMAND_SPECIAL	equ 0x8    ; Enable response to special cycles
PCI_COMMAND_INVALIDATE	equ 0x10   ; Use memory write and invalidate
PCI_COMMAND_VGA_PALETTE equ 0x20   ; Enable palette snooping
PCI_COMMAND_PARITY	equ 0x40   ; Enable parity checking
PCI_COMMAND_WAIT	equ 0x80   ; Enable address/data stepping
PCI_COMMAND_SERR	equ 0x100  ; Enable SERR
PCI_COMMAND_FAST_BACK	equ 0x200  ; Enable back-to-back writes

PCI_VENDOR_ID		equ 0x00   ; 16 bits
PCI_DEVICE_ID		equ 0x02   ; 16 bits
PCI_COMMAND		equ 0x04   ; 16 bits

PCI_BASE_ADDRESS_0	equ 0x10   ; 32 bits
PCI_BASE_ADDRESS_1	equ 0x14   ; 32 bits
PCI_BASE_ADDRESS_2	equ 0x18   ; 32 bits
PCI_BASE_ADDRESS_3	equ 0x1c   ; 32 bits
PCI_BASE_ADDRESS_4	equ 0x20   ; 32 bits
PCI_BASE_ADDRESS_5	equ 0x24   ; 32 bits

PCI_BASE_ADDRESS_MEM_TYPE_MASK equ 0x06
PCI_BASE_ADDRESS_MEM_TYPE_32   equ 0x00 ; 32 bit address
PCI_BASE_ADDRESS_MEM_TYPE_1M   equ 0x02 ; Below 1M [obsolete]
PCI_BASE_ADDRESS_MEM_TYPE_64   equ 0x04 ; 64 bit address

PCI_BASE_ADDRESS_IO_MASK  equ (not 0x03)
PCI_BASE_ADDRESS_MEM_MASK equ (not 0x0f)
PCI_BASE_ADDRESS_SPACE_IO equ 0x01
PCI_ROM_ADDRESS 	  equ 0x30	; 32 bits

proc CONFIG_CMD,where:byte
	movzx	eax,byte[pci_bus]
	shl	eax,8
	mov	al,[pci_dev]
	shl	eax,8
	mov	al,[where]
	and	al,not 3
	or	eax,0x80000000
	ret
endp

proc pci_read_config_byte,where:dword
	push	edx
	stdcall CONFIG_CMD,[where]
	mov	dx,0xCF8
	out	dx,eax
	mov	edx,[where]
	and	edx,3
	add	edx,0xCFC
	in	al,dx
	pop	edx
	ret
endp

proc pci_read_config_word,where:dword
	push	edx
	stdcall CONFIG_CMD,[where]
	mov	dx,0xCF8
	out	dx,eax
	mov	edx,[where]
	and	edx,2
	add	edx,0xCFC
	in	ax,dx
	pop	edx
	ret
endp

proc pci_read_config_dword,where:dword
	push	edx
	stdcall CONFIG_CMD,[where]
	mov	edx,0xCF8
	out	dx,eax
	mov	edx,0xCFC
	in	eax,dx
	pop	edx
	ret
endp

proc pci_write_config_byte,where:dword,value:byte
	push	edx
	stdcall CONFIG_CMD,[where]
	mov	dx,0xCF8
	out	dx,eax
	mov	edx,[where]
	and	edx,3
	add	edx,0xCFC
	mov	al,[value]
	out	dx,al
	pop	edx
	ret
endp

proc pci_write_config_word,where:dword,value:word
	push	edx
	stdcall CONFIG_CMD,[where]
	mov	dx,0xCF8
	out	dx,eax
	mov	edx,[where]
	and	edx,2
	add	edx,0xCFC
	mov	ax,[value]
	out	dx,ax
	pop	edx
	ret
endp

proc pci_write_config_dword,where:dword,value:dword
	push	edx
	stdcall CONFIG_CMD,[where]
	mov	edx,0xCF8
	out	dx,eax
	mov	edx,0xCFC
	mov	eax,[value]
	out	dx,eax
	pop	edx
	ret
endp

; Set device to be a busmaster in case BIOS neglected to do so.
; Also adjust PCI latency timer to a reasonable value, 32.
proc adjust_pci_device

;        DEBUGF  1,"K : adjust_pci_device\n"

	stdcall pci_read_config_word,PCI_COMMAND
	mov	bx,ax
	or	bx,PCI_COMMAND_MASTER or PCI_COMMAND_IO
	cmp	ax,bx
	je	@f
;        DEBUGF  1,"K : adjust_pci_device: The PCI BIOS has not enabled this device!\nK :   Updating PCI command %x->%x. pci_bus %x pci_device_fn %x\n",ax,bx,[pci_bus]:2,[pci_dev]:2
	stdcall pci_write_config_word,PCI_COMMAND,ebx
    @@:
	stdcall pci_read_config_byte,PCI_LATENCY_TIMER
	cmp	al,32
	jae	@f
;        DEBUGF  1,"K : adjust_pci_device: PCI latency timer (CFLT) is unreasonably low at %d.\nK :   Setting to 32 clocks.\n",al
	stdcall pci_write_config_byte,PCI_LATENCY_TIMER,32
    @@:
	ret
endp

; Find the start of a pci resource
proc pci_bar_start,index:dword
	stdcall pci_read_config_dword,[index]
	test	eax,PCI_BASE_ADDRESS_SPACE_IO
	jz	@f
	and	eax,PCI_BASE_ADDRESS_IO_MASK
	jmp	.exit
    @@: push	eax
	and	eax,PCI_BASE_ADDRESS_MEM_TYPE_MASK
	cmp	eax,PCI_BASE_ADDRESS_MEM_TYPE_64
	jne	.not64
	mov	eax,[index]
	add	eax,4
	stdcall pci_read_config_dword,eax
	or	eax,eax
	jz	.not64
;        DEBUGF  1,"K : pci_bar_start: Unhandled 64bit BAR\n"
	add	esp,4
	or	eax,-1
	ret
  .not64:
	pop	eax
	and	eax,PCI_BASE_ADDRESS_MEM_MASK
  .exit:
	ret
endp

proc rtl8169_init_board

;        DEBUGF  1,"K : rtl8169_init_board\n"

	call	adjust_pci_device

	stdcall pci_bar_start,PCI_BASE_ADDRESS_0
	mov	[rtl8169_tpc.mmio_addr],eax
	; Soft reset the chip
	RTL_W8	RTL8169_REG_ChipCmd,RTL8169_CMD_Reset

	; Check that the chip has finished the reset
	mov	ecx,1000
    @@: RTL_R8	RTL8169_REG_ChipCmd
	test	al,RTL8169_CMD_Reset
	jz	@f
	stdcall udelay,10
	loop	@b
    @@:
	; identify config method
	RTL_R32 RTL8169_REG_TxConfig
	and	eax,0x7c800000
;        DEBUGF  1,"K : rtl8169_init_board: TxConfig & 0x7c800000 = 0x%x\n",eax
	mov	esi,mac_info-8
    @@: add	esi,8
	mov	ecx,eax
	and	ecx,[esi]
	cmp	ecx,[esi]
	jne	@b
	mov	eax,[esi+4]
	mov	[rtl8169_tpc.mcfg],eax

	mov	[rtl8169_tpc.pcfg],PCFG_METHOD_3
	stdcall RTL8169_READ_GMII_REG,3
	and	al,0x0f
	or	al,al
	jnz	@f
	mov	[rtl8169_tpc.pcfg],PCFG_METHOD_1
	jmp	.pconf
    @@: dec	al
	jnz	.pconf
	mov	[rtl8169_tpc.pcfg],PCFG_METHOD_2
  .pconf:

	; identify chip attached to board
	mov	ecx,10
	mov	eax,[rtl8169_tpc.mcfg]
    @@: dec	ecx
	js	@f
	cmp	eax,[rtl_chip_info+ecx*8]
	jne	@b
	mov	[rtl8169_tpc.chipset],ecx
	jmp	.match
    @@:
	; if unknown chip, assume array element #0, original RTL-8169 in this case
;        DEBUGF  1,"K : rtl8169_init_board: PCI device: unknown chip version, assuming RTL-8169\n"
	RTL_R32 RTL8169_REG_TxConfig
;        DEBUGF  1,"K : rtl8169_init_board: PCI device: TxConfig = 0x%x\n",eax

	mov	[rtl8169_tpc.chipset],0

	xor	eax,eax
	inc	eax
	ret

  .match:
	xor	eax,eax
	ret
endp

proc rtl8169_hw_PHY_config

;        DEBUGF  1,"K : rtl8169_hw_PHY_config: priv.mcfg=%d, priv.pcfg=%d\n",[rtl8169_tpc.mcfg],[rtl8169_tpc.pcfg]

;       DBG_PRINT("priv->mcfg=%d, priv->pcfg=%d\n", tpc->mcfg, tpc->pcfg);

	cmp	[rtl8169_tpc.mcfg],MCFG_METHOD_04
	jne	.not_4
;       stdcall RTL8169_WRITE_GMII_REG,0x1F,0x0001
;       stdcall RTL8169_WRITE_GMII_REG,0x1b,0x841e
;       stdcall RTL8169_WRITE_GMII_REG,0x0e,0x7bfb
;       stdcall RTL8169_WRITE_GMII_REG,0x09,0x273a
	stdcall RTL8169_WRITE_GMII_REG,0x1F,0x0002
	stdcall RTL8169_WRITE_GMII_REG,0x01,0x90D0
	stdcall RTL8169_WRITE_GMII_REG,0x1F,0x0000
	jmp	.exit
  .not_4:
	cmp	[rtl8169_tpc.mcfg],MCFG_METHOD_02
	je	@f
	cmp	[rtl8169_tpc.mcfg],MCFG_METHOD_03
	jne	.not_2_or_3
    @@: stdcall RTL8169_WRITE_GMII_REG,0x1F,0x0001
	stdcall RTL8169_WRITE_GMII_REG,0x15,0x1000
	stdcall RTL8169_WRITE_GMII_REG,0x18,0x65C7
	stdcall RTL8169_WRITE_GMII_REG,0x04,0x0000
	stdcall RTL8169_WRITE_GMII_REG,0x03,0x00A1
	stdcall RTL8169_WRITE_GMII_REG,0x02,0x0008
	stdcall RTL8169_WRITE_GMII_REG,0x01,0x1020
	stdcall RTL8169_WRITE_GMII_REG,0x00,0x1000
	stdcall RTL8169_WRITE_GMII_REG,0x04,0x0800
	stdcall RTL8169_WRITE_GMII_REG,0x04,0x0000
	stdcall RTL8169_WRITE_GMII_REG,0x04,0x7000
	stdcall RTL8169_WRITE_GMII_REG,0x03,0xFF41
	stdcall RTL8169_WRITE_GMII_REG,0x02,0xDE60
	stdcall RTL8169_WRITE_GMII_REG,0x01,0x0140
	stdcall RTL8169_WRITE_GMII_REG,0x00,0x0077
	stdcall RTL8169_WRITE_GMII_REG,0x04,0x7800
	stdcall RTL8169_WRITE_GMII_REG,0x04,0x7000
	stdcall RTL8169_WRITE_GMII_REG,0x04,0xA000
	stdcall RTL8169_WRITE_GMII_REG,0x03,0xDF01
	stdcall RTL8169_WRITE_GMII_REG,0x02,0xDF20
	stdcall RTL8169_WRITE_GMII_REG,0x01,0xFF95
	stdcall RTL8169_WRITE_GMII_REG,0x00,0xFA00
	stdcall RTL8169_WRITE_GMII_REG,0x04,0xA800
	stdcall RTL8169_WRITE_GMII_REG,0x04,0xA000
	stdcall RTL8169_WRITE_GMII_REG,0x04,0xB000
	stdcall RTL8169_WRITE_GMII_REG,0x03,0xFF41
	stdcall RTL8169_WRITE_GMII_REG,0x02,0xDE20
	stdcall RTL8169_WRITE_GMII_REG,0x01,0x0140
	stdcall RTL8169_WRITE_GMII_REG,0x00,0x00BB
	stdcall RTL8169_WRITE_GMII_REG,0x04,0xB800
	stdcall RTL8169_WRITE_GMII_REG,0x04,0xB000
	stdcall RTL8169_WRITE_GMII_REG,0x04,0xF000
	stdcall RTL8169_WRITE_GMII_REG,0x03,0xDF01
	stdcall RTL8169_WRITE_GMII_REG,0x02,0xDF20
	stdcall RTL8169_WRITE_GMII_REG,0x01,0xFF95
	stdcall RTL8169_WRITE_GMII_REG,0x00,0xBF00
	stdcall RTL8169_WRITE_GMII_REG,0x04,0xF800
	stdcall RTL8169_WRITE_GMII_REG,0x04,0xF000
	stdcall RTL8169_WRITE_GMII_REG,0x04,0x0000
	stdcall RTL8169_WRITE_GMII_REG,0x1F,0x0000
	stdcall RTL8169_WRITE_GMII_REG,0x0B,0x0000
	jmp	.exit
  .not_2_or_3:
;       DBG_PRINT("tpc->mcfg=%d. Discard hw PHY config.\n", tpc->mcfg);
;        DEBUGF  1,"K :   tpc.mcfg=%d, discard hw PHY config\n",[rtl8169_tpc.mcfg]
  .exit:
	ret
endp

;proc pci_write_config_byte
;       ret
;endp

proc RTL8169_WRITE_GMII_REG,RegAddr:byte,value:dword

;;;     DEBUGF  1,"K : RTL8169_WRITE_GMII_REG: 0x%x 0x%x\n",[RegAddr]:2,[value]

	movzx	eax,[RegAddr]
	shl	eax,16
	or	eax,[value]
	or	eax,0x80000000
	RTL_W32 RTL8169_REG_PHYAR,eax
	stdcall udelay,1	;;;1000

	mov	ecx,2000
	; Check if the RTL8169 has completed writing to the specified MII register
    @@: RTL_R32 RTL8169_REG_PHYAR
	test	eax,0x80000000
	jz	.exit
	stdcall udelay,1	;;;100
	loop	@b
  .exit:
	ret
endp

proc RTL8169_READ_GMII_REG,RegAddr:byte

;;;     DEBUGF  1,"K : RTL8169_READ_GMII_REG: 0x%x\n",[RegAddr]:2

	push	ecx
	movzx	eax,[RegAddr]
	shl	eax,16
;       or      eax,0x0
	RTL_W32 RTL8169_REG_PHYAR,eax
	stdcall udelay,1	;;;1000

	mov	ecx,2000
	; Check if the RTL8169 has completed retrieving data from the specified MII register
    @@: RTL_R32 RTL8169_REG_PHYAR
	test	eax,0x80000000
	jnz	.exit
	stdcall udelay,1	;;;100
	loop	@b

	or	eax,-1
	pop	ecx
	ret
  .exit:
	RTL_R32 RTL8169_REG_PHYAR
	and	eax,0xFFFF
	pop	ecx
	ret
endp

proc rtl8169_set_rx_mode

;        DEBUGF  1,"K : rtl8169_set_rx_mode\n"

	; IFF_ALLMULTI
	; Too many to filter perfectly -- accept all multicasts
	RTL_R32 RTL8169_REG_RxConfig
	mov	ecx,[rtl8169_tpc.chipset]
	and	eax,[rtl_chip_info + ecx * 8 + 4] ; RxConfigMask
	or	eax,rtl8169_rx_config or (RTL8169_RXM_AcceptBroadcast or RTL8169_RXM_AcceptMulticast or RTL8169_RXM_AcceptMyPhys)
	RTL_W32 RTL8169_REG_RxConfig,eax

	; Multicast hash filter
	RTL_W32 RTL8169_REG_MAR0 + 0,0xffffffff
	RTL_W32 RTL8169_REG_MAR0 + 4,0xffffffff
	ret
endp

proc rtl8169_init_ring

;        DEBUGF  1,"K : rtl8169_init_ring\n"

	xor	eax,eax
	mov	[rtl8169_tpc.cur_rx],eax
	mov	[rtl8169_tpc.cur_tx],eax

	mov	edi,[rtl8169_tpc.TxDescArray]
	mov	ecx,(NUM_TX_DESC * sizeof.rtl8169_TxDesc) / 4
	cld
	rep	stosd
	mov	edi,[rtl8169_tpc.RxDescArray]
	mov	ecx,(NUM_RX_DESC * sizeof.rtl8169_RxDesc) / 4
	rep	stosd

	mov	edi,rtl8169_tpc.Tx_skbuff
	mov	eax,rtl8169_txb
	mov	ecx,NUM_TX_DESC
    @@: stosd
	inc	eax	      ; add eax,RX_BUF_SIZE ???
	loop	@b

;!!!    for (i = 0; i < NUM_RX_DESC; i++) {
;!!!            if (i == (NUM_RX_DESC - 1))
;!!!                    tpc->RxDescArray[i].status = (OWNbit | EORbit) | RX_BUF_SIZE;
;!!!            else
;!!!                    tpc->RxDescArray[i].status = OWNbit | RX_BUF_SIZE;
;!!!            tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
;!!!            tpc->RxDescArray[i].buf_addr = virt_to_bus(tpc->RxBufferRing[i]);
;!!!    }
	mov	esi,rtl8169_tpc.RxBufferRing
	mov	edi,[rtl8169_tpc.RxDescArray]
	mov	eax,rtl8169_rxb
	mov	ecx,NUM_RX_DESC
    @@: mov	[esi],eax
	mov	[edi+rtl8169_RxDesc.buf_addr],eax
	sub	[edi+rtl8169_RxDesc.buf_addr],OS_BASE				; shurf 28.09.2008
	mov	[edi+rtl8169_RxDesc.status],RTL8169_DSB_OWNbit or RX_BUF_SIZE
	add	esi,4
	add	edi,sizeof.rtl8169_RxDesc
	add	eax,RX_BUF_SIZE
	loop	@b

	or	[edi - sizeof.rtl8169_RxDesc + rtl8169_RxDesc.status],RTL8169_DSB_EORbit

	ret
endp

proc rtl8169_hw_start

;        DEBUGF  1,"K : rtl8169_hw_start\n"

	; Soft reset the chip
	RTL_W8	RTL8169_REG_ChipCmd,RTL8169_CMD_Reset
	; Check that the chip has finished the reset
	mov	ecx,1000
    @@: RTL_R8	RTL8169_REG_ChipCmd
	and	al,RTL8169_CMD_Reset
	jz	@f
	stdcall udelay,10
	loop	@b
    @@:
	RTL_W8	RTL8169_REG_Cfg9346,RTL8169_CFG_9346_Unlock
	RTL_W8	RTL8169_REG_ChipCmd,RTL8169_CMD_TxEnb or RTL8169_CMD_RxEnb
	RTL_W8	RTL8169_REG_ETThReg,ETTh
	; For gigabit rtl8169
	RTL_W16 RTL8169_REG_RxMaxSize,RxPacketMaxSize
	; Set Rx Config register
	RTL_R32 RTL8169_REG_RxConfig
	mov	ecx,[rtl8169_tpc.chipset]
	and	eax,[rtl_chip_info + ecx * 8 + 4] ; RxConfigMask
	or	eax,rtl8169_rx_config
	RTL_W32 RTL8169_REG_RxConfig,eax
	; Set DMA burst size and Interframe Gap Time
	RTL_W32 RTL8169_REG_TxConfig,(TX_DMA_BURST shl RTL8169_TXC_DMAShift) or (InterFrameGap shl RTL8169_TXC_InterFrameGapShift)
	RTL_R16 RTL8169_REG_CPlusCmd
	RTL_W16 RTL8169_REG_CPlusCmd,ax

	RTL_R16 RTL8169_REG_CPlusCmd
	or	ax,1 shl 3
	cmp	[rtl8169_tpc.mcfg],MCFG_METHOD_02
	jne	@f
	cmp	[rtl8169_tpc.mcfg],MCFG_METHOD_03
	jne	@f
	or	ax,1 shl 14
;       DEBUGF  1,"K :   Set MAC Reg C+CR Offset 0xE0: bit-3 and bit-14\n"
	jmp	.set
    @@:;DEBUGF  1,"K :   Set MAC Reg C+CR Offset 0xE0: bit-3\n"
  .set: RTL_W16 RTL8169_REG_CPlusCmd,ax

;       RTL_W16 0xE2,0x1517
;       RTL_W16 0xE2,0x152a
;       RTL_W16 0xE2,0x282a
	RTL_W16 0xE2,0x0000

	MOV	[rtl8169_tpc.cur_rx],0
	push	eax								; shurf 28.09.2008
	mov	eax, [rtl8169_tpc.TxDescArray]					; shurf 28.09.2008
	sub	eax, OS_BASE							; shurf 28.09.2008
	RTL_W32 RTL8169_REG_TxDescStartAddr,eax ;[rtl8169_tpc.TxDescArray]      ; shurf 28.09.2008
	mov	eax, [rtl8169_tpc.RxDescArray]					; shurf 28.09.2008
	sub	eax, OS_BASE							; shurf 28.09.2008
	RTL_W32 RTL8169_REG_RxDescStartAddr,eax ;[rtl8169_tpc.RxDescArray]      ; shurf 28.09.2008
	pop	eax								; shurf 28.09.2008
	RTL_W8	RTL8169_REG_Cfg9346,RTL8169_CFG_9346_Lock
	stdcall udelay,10
	RTL_W32 RTL8169_REG_RxMissed,0
	call	rtl8169_set_rx_mode
	; no early-rx interrupts
	RTL_R16 RTL8169_REG_MultiIntr
	and	ax,0xF000
	RTL_W16 RTL8169_REG_MultiIntr,ax
	RTL_W16 RTL8169_REG_IntrMask,0 ; rtl8169_intr_mask
	ret
endp

proc udelay,msec:dword
	push	esi
	mov	esi,[msec]
	call	delay_ms
	pop	esi
	ret
endp

;***************************************************************************
;   Function
;      rtl8169_probe
;   Description
;      Searches for an ethernet card, enables it and clears the rx buffer
;      If a card was found, it enables the ethernet -> TCPIP link
;   Destroyed registers
;      eax, ebx, ecx, edx
;
;***************************************************************************
proc rtl8169_probe

;        DEBUGF  1,"K : rtl8169_probe: 0x%x : 0x%x 0x%x\n",[io_addr]:8,[pci_bus]:2,[pci_dev]:2

	call	rtl8169_init_board

	mov	ecx,MAC_ADDR_LEN
	mov	edx,[rtl8169_tpc.mmio_addr]
	add	edx,RTL8169_REG_MAC0
	xor	ebx,ebx
	; Get MAC address. FIXME: read EEPROM
    @@: RTL_R8	dx
	mov	[node_addr+ebx],al
	inc	edx
	inc	ebx
	loop	@b

;        DEBUGF  1,"K : rtl8169_probe: MAC = %x-%x-%x-%x-%x-%x\n",[node_addr+0]:2,[node_addr+1]:2,[node_addr+2]:2,[node_addr+3]:2,[node_addr+4]:2,[node_addr+5]:2

	; Config PHY
	stdcall rtl8169_hw_PHY_config
;       DEBUGF  1,"K :   Set MAC Reg C+CR Offset 0x82h = 0x01h\n"
	RTL_W8	0x82,0x01
	cmp	[rtl8169_tpc.mcfg],MCFG_METHOD_03
	jae	@f
;       DEBUGF  1,"K :   Set PCI Latency=0x40\n"
;       stdcall pci_write_config_byte,PCI_LATENCY_TIMER,0x40
   @@:
	cmp	[rtl8169_tpc.mcfg],MCFG_METHOD_02
	jne	@f
;       DEBUGF  1,"K :   Set MAC Reg C+CR Offset 0x82h = 0x01h\n"
	RTL_W8	0x82,0x01
;       DEBUGF  1,"K :   Set PHY Reg 0x0bh = 0x00h\n"
	stdcall RTL8169_WRITE_GMII_REG,0x0b,0x0000	; w 0x0b 15 0 0
    @@:
	; if TBI is not enabled
	RTL_R8	RTL8169_REG_PHYstatus
	test	al,RTL8169_PHYS_TBI_Enable
	jz	.tbi_dis
	stdcall RTL8169_READ_GMII_REG,RTL8169_PHY_AUTO_NEGO_REG
	; enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged
	and	eax,0x0C1F
	or	eax,RTL8169_PHY_Cap_10_Half or RTL8169_PHY_Cap_10_Full or RTL8169_PHY_Cap_100_Half or RTL8169_PHY_Cap_100_Full
	stdcall RTL8169_WRITE_GMII_REG,RTL8169_PHY_AUTO_NEGO_REG,eax
	; enable 1000 Full Mode
	stdcall RTL8169_WRITE_GMII_REG,RTL8169_PHY_1000_CTRL_REG,RTL8169_PHY_Cap_1000_Full or RTL8169_PHY_Cap_1000_Half ; rtl8168
	; Enable auto-negotiation and restart auto-nigotiation
	stdcall RTL8169_WRITE_GMII_REG,RTL8169_PHY_CTRL_REG,RTL8169_PHY_Enable_Auto_Nego or RTL8169_PHY_Restart_Auto_Nego
	stdcall udelay,100
	mov	ecx,10000
	; wait for auto-negotiation process
    @@: dec	ecx
	jz	@f
	stdcall RTL8169_READ_GMII_REG,RTL8169_PHY_STAT_REG
	stdcall udelay,100
	test	eax,RTL8169_PHY_Auto_Neco_Comp
	jz	@b
	RTL_R8	RTL8169_REG_PHYstatus
	jmp	@f
  .tbi_dis:
	stdcall udelay,100
    @@:
	call	rtl8169_reset
	ret
endp

;***************************************************************************
;   Function
;      rt8169_reset
;   Description
;      Place the chip (ie, the ethernet card) into a virgin state
;   Destroyed registers
;      eax, ebx, ecx, edx
;
;***************************************************************************
proc rtl8169_reset

;        DEBUGF  1,"K : rtl8169_reset: 0x%x : 0x%x 0x%x\n",[io_addr]:8,[pci_bus]:2,[pci_dev]:2

	mov	[rtl8169_tpc.TxDescArrays],rtl8169_tx_ring
	; Tx Desscriptor needs 256 bytes alignment
	mov	[rtl8169_tpc.TxDescArray],rtl8169_tx_ring

	mov	[rtl8169_tpc.RxDescArrays],rtl8169_rx_ring
	; Rx Desscriptor needs 256 bytes alignment
	mov	[rtl8169_tpc.RxDescArray],rtl8169_rx_ring

	call	rtl8169_init_ring
	call	rtl8169_hw_start
	; Construct a perfect filter frame with the mac address as first match
	; and broadcast for all others
	mov	edi,rtl8169_txb
	or	al,-1
	mov	ecx,192
	cld
	rep	stosb

	mov	esi,node_addr
	mov	edi,rtl8169_txb
	movsd
	movsw

	mov	eax,[pci_data]
	mov	[eth_status],eax
	ret
endp

;***************************************************************************
;   Function
;      rtl8169_transmit
;   Description
;      Transmits a packet of data via the ethernet card
;         d - edi - Pointer to 48 bit destination address
;         t -  bx - Type of packet
;         s - ecx - size of packet
;         p - esi - pointer to packet data
;   Destroyed registers
;      eax, edx, esi, edi
;
;***************************************************************************
proc rtl8169_transmit

;        DEBUGF  1,"K : rtl8169_transmit\n" ;: 0x%x : 0x%x 0x%x 0x%x 0x%x\n",[io_addr]:8,edi,bx,ecx,esi

	push	ecx edx esi
	mov	eax,MAX_ETH_FRAME_SIZE
	mul	[rtl8169_tpc.cur_tx]
	mov	esi,edi
	; point to the current txb incase multiple tx_rings are used
	mov	edi,[rtl8169_tpc.Tx_skbuff + eax * 4]
	mov	eax,edi
	cld
; copy destination address
	movsd
	movsw
; copy source address
	mov	esi,node_addr
	movsd
	movsw
; copy packet type
	mov	[edi],bx
	add	edi,2
; copy the packet data
	pop	esi edx ecx
	push	ecx
	shr	ecx,2
	rep	movsd
	pop	ecx
	push	ecx
	and	ecx,3
	rep	movsb

;!!!    s += ETH_HLEN;
;!!!    s &= 0x0FFF;
;!!!    while (s < ETH_ZLEN)
;!!!            ptxb[s++] = '\0';
	mov	edi,eax
	pop	ecx
	push	eax
	add	ecx,ETH_HLEN
	and	ecx,0x0FFF
	xor	al,al
	add	edi,ecx
    @@: cmp	ecx,ETH_ZLEN
	jae	@f
	stosb
	inc	ecx
	jmp	@b
    @@: pop	eax

	mov	ebx,eax
	mov	eax,sizeof.rtl8169_TxDesc
	mul	[rtl8169_tpc.cur_tx]
	add	eax,[rtl8169_tpc.TxDescArray]
	xchg	eax,ebx
	mov	[ebx + rtl8169_TxDesc.buf_addr],eax
	sub	[ebx + rtl8169_TxDesc.buf_addr],OS_BASE 				; shurf 28.09.2008

	mov	eax,ecx
	cmp	eax,ETH_ZLEN
	jae	@f
	mov	eax,ETH_ZLEN
    @@: or	eax,RTL8169_DSB_OWNbit or RTL8169_DSB_FSbit or RTL8169_DSB_LSbit
	cmp	[rtl8169_tpc.cur_tx],NUM_TX_DESC - 1
	jne	@f
	or	eax,RTL8169_DSB_EORbit
    @@: mov	[ebx + rtl8169_TxDesc.status],eax

	RTL_W8	RTL8169_REG_TxPoll,0x40     ; set polling bit

	inc	[rtl8169_tpc.cur_tx]
	and	[rtl8169_tpc.cur_tx],NUM_TX_DESC - 1

;!!!    to = currticks() + TX_TIMEOUT;
;!!!    while ((tpc->TxDescArray[entry].status & OWNbit) && (currticks() < to));        /* wait */
	mov	ecx,TX_TIMEOUT / 10
    @@: test	[ebx + rtl8169_TxDesc.status],RTL8169_DSB_OWNbit
	jnz	@f
	stdcall udelay,10
	loop	@b
;        DEBUGF  1,"K : rtl8169_transmit: TX Time Out\n"
    @@:

	ret
endp

;***************************************************************************
; Function
;    rtl8169_poll
;
; Description
;    Polls the ethernet card for a received packet
;    Received data, if any, ends up in Ether_buffer
; Destroyed register(s)
;    eax, edx, ecx
;
;***************************************************************************
proc rtl8169_poll

;       DEBUGF  1,"K : rtl8169_poll\n" ;: 0x%x : none\n",[io_addr]:8

	mov	word[eth_rx_data_len],0

	mov	eax,sizeof.rtl8169_RxDesc
	mul	[rtl8169_tpc.cur_rx]
	add	eax,[rtl8169_tpc.RxDescArray]
	mov	ebx,eax

;       DEBUGF  1,"K :   rtl8169_RxDesc.status = 0x%x\n",[ebx + rtl8169_RxDesc.status]

	test	[ebx + rtl8169_RxDesc.status],RTL8169_DSB_OWNbit ; 0x80000600
	jnz	.exit

;       DEBUGF  1,"K :   rtl8169_tpc.cur_rx = %u\n",[rtl8169_tpc.cur_rx]

	; h/w no longer present (hotplug?) or major error, bail
	RTL_R16 RTL8169_REG_IntrStatus

;       DEBUGF  1,"K :   IntrStatus = 0x%x\n",ax

	cmp	ax,0xFFFF
	je	.exit

	push	eax
	and	ax,not (RTL8169_ISB_RxFIFOOver or RTL8169_ISB_RxOverflow or RTL8169_ISB_RxOK)
	RTL_W16 RTL8169_REG_IntrStatus,ax

	mov	eax,[ebx + rtl8169_RxDesc.status]

;       DEBUGF  1,"K :   RxDesc.status = 0x%x\n",eax

	test	eax,RTL8169_SD_RxRES
	jnz	.else
	and	eax,0x00001FFF
;       jz      .exit.pop
	add	eax,-4
	mov	[eth_rx_data_len],ax

;        DEBUGF  1,"K : rtl8169_poll: data length = %u\n",ax

	push	eax
	mov	ecx,eax
	shr	ecx,2
	mov	eax,[rtl8169_tpc.cur_rx]
	mov	edx,[rtl8169_tpc.RxBufferRing + eax * 4]
	mov	esi,edx
	mov	edi,Ether_buffer
	cld
	rep	movsd
	pop	ecx
	and	ecx,3
	rep	movsb

	mov	eax,RTL8169_DSB_OWNbit or RX_BUF_SIZE
	cmp	[rtl8169_tpc.cur_rx],NUM_RX_DESC - 1
	jne	@f
	or	eax,RTL8169_DSB_EORbit
    @@: mov	[ebx + rtl8169_RxDesc.status],eax

	mov	[ebx + rtl8169_RxDesc.buf_addr],edx
	sub	[ebx + rtl8169_RxDesc.buf_addr],OS_BASE 				; shurf 28.09.2008
	jmp	@f
  .else:
;        DEBUGF  1,"K : rtl8169_poll: Rx Error\n"
	; FIXME: shouldn't I reset the status on an error
    @@:
	inc	[rtl8169_tpc.cur_rx]
	and	[rtl8169_tpc.cur_rx],NUM_RX_DESC - 1
  .exit.pop:
	pop	eax
	and	ax,RTL8169_ISB_RxFIFOOver or RTL8169_ISB_RxOverflow or RTL8169_ISB_RxOK
	RTL_W16 RTL8169_REG_IntrStatus,ax
  .exit:
	ret
endp

proc rtl8169_cable
	ret
endp