kolibrios-gitea/programs/develop/libraries/proc_lib/trunk/colrdial.mac

;*****************************************************************************
; Macro for use Color Dialog - for Kolibri OS
; Copyright (c) 2013, Marat Zakiyanov aka Mario79, aka Mario
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions are met:
;	 * Redistributions of source code must retain the above copyright
;	   notice, this list of conditions and the following disclaimer.
;	 * Redistributions in binary form must reproduce the above copyright
;	   notice, this list of conditions and the following disclaimer in the
;	   documentation and/or other materials provided with the distribution.
;	 * Neither the name of the <organization> nor the
;	   names of its contributors may be used to endorse or promote products
;	   derived from this software without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY Marat Zakiyanov ''AS IS'' AND ANY
; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
; DISCLAIMED. IN NO EVENT SHALL <copyright holder> BE LIABLE FOR ANY
; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*****************************************************************************
;---------------------------------------------------------------------
;Some documentation for memory
;
;area name db 'FFFFFFFF_color_dialog',0 ; FFFFFFFF = PID
;
; communication area data
; flag  ; +0
; dw 0   ; 0 - empty, 1 - OK, color selected
;          2 - use another method/not found program, 3 - cancel
;
; type of dialog:  0-Palette&Tone
; dw 0 ; +2
;
; window X size ; +4
; dw 0
;
; window X position ; +6 
; dw 0
;
; window y size ; +8
; dw 0
;
; window Y position ; +10
; dw 0
;
; ColorDialog WINDOW SLOT ; +12
; dd 0
;
; Color type ; +16
; dd 0
;
; Color value ; +20
; dd 0
;---------------------------------------------------------------------
;*****************************************************************************
macro	ColorDialog_exit
{
popa
ret 4
}
;*****************************************************************************
macro	use_ColorDialog
{
ColorDialog:
cd_type			equ dword [ebp]	; 0-Palette&Tone
cd_procinfo		equ dword [ebp+4] ; Process info area for function 9
cd_com_area_name	equ dword [ebp+8] ; Name for shared area
cd_com_area		equ dword [ebp+12] ; Adress of shared area
cd_start_path		equ dword [ebp+16] ; Location path to ColorDialog
cd_draw_window		equ dword [ebp+20] ; Adress of procedure - draw_window
cd_status		equ dword [ebp+24] ; 0-Cancel, 1-Get color OK, 2-Use alternatives
cd_x_size		equ [ebp+28] ; Window X size
cd_x_start		equ [ebp+30] ; Window X position
cd_y_size		equ [ebp+32] ; Window y size
cd_y_start		equ [ebp+34] ; Window Y position
cd_color_type		equ [ebp+36] ; 0- RGB, 1 or other - reserved
cd_color		equ [ebp+40] ; Selected color
;*****************************************************************************
.init:
	pusha
	mov   ebp,dword [esp+36]
	mcall	9,cd_procinfo,-1
	mov	ebx,[ebx+30]
	mov	edi,cd_com_area_name
	add	edi,7
	std
	mov	ecx,4
@@:
	mov	al,bl
	and	al,1111b
	add	al,0x30
	stosb
	mov	al,bl
	shr	al,4
	and	al,1111b
	add	al,0x30
	stosb
	shr	ebx,8
	dec	ecx
	jnz	@r
	cld
	
	mcall	68,22,cd_com_area_name,4096,0x09
	mov	cd_com_area,eax
	
ColorDialog_exit
;*****************************************************************************
;*****************************************************************************
.start:
	pusha
	mov   ebp,dword [esp+36]
	
	mov	eax,cd_com_area
	test	eax,eax
	jz	.1
	mov	ebx,cd_type
	mov	[eax+2],bx
	
	mov	[eax],word 2	; start ColorDialog

	pusha
	mcall	9,cd_procinfo,-1

	mov	eax,[ebx+42] ;main window x size
	shr	eax,1
	add	eax,[ebx+34] ; main window x start
	mov	cx,cd_x_size
	shr	cx,1
	sub	ax,cx
	test	ax,cx
	test	eax,0x8000
	jz	@f
	xor	eax,eax
@@:
	mov	cd_x_start,ax

	mov	eax,[ebx+46] ;main window y size
	shr	eax,1
	add	eax,[ebx+38] ; main window y start
	mov	cx,cd_y_size
	shr	cx,1
	sub	ax,cx
	test	eax,0x8000
	jz	@f
	xor	eax,eax
@@:
	mov	cd_y_start,ax
	popa

	mov	ebx,dword cd_x_size
	mov	[eax+4],ebx
	mov	ebx,dword cd_y_size
	mov	[eax+8],ebx
	
;----------------------------------------------
	mov	ebx,cd_procinfo
	xor	eax,eax
	mov	edi,ebx
	mov	ecx,6
	cld
	rep	stosd
	mov	[ebx],dword 7
	mov	eax,cd_com_area_name
	mov	[ebx+8],eax
	mov	eax,cd_start_path
	mov	[ebx+21],eax
	mcall	70

	shr	eax,31
	test	eax,eax
	jnz	.1
;----------------------------------------------
.still:
; The main window of application sometimes
; is not present the really. For this reason
; not use func 10 and 23, because event 1
; is not cleared without call of func 0.
; In this case is suitable only func 5 and 11,
; or 68.1 and 11 for better response.
;	mcall	5,10
	mcall	68,1
	mcall	11
	cmp	eax,1
	je	.draw
	cmp	eax,2
	je	.key
	cmp	eax,3
	je	.button
	jmp	.no_draw
.key:
	mcall	2
	jmp	.no_draw
.button:
	mcall	17
	jmp	.no_draw
;----------------------------------------------
.draw:
	pusha
	call	cd_draw_window
	popa
;----------------------------------------------
	pusha
	call	.prepare_PID
	jz	@f

	mov	ecx,eax	; WINDOW SLOT
	mcall	18,7
	cmp	eax,ecx ; compare ACTIVE and WINDOW SLOT 
	jne	@f

	mov	eax,cd_com_area
	mov	ecx,[eax+12]
	test	ecx,ecx
	jz	@f
	mcall	18,3
@@:
	popa
;----------------------------------------------
.no_draw:
	mov	eax,cd_com_area
	movzx	ebx,word [eax]
	test	ebx,ebx
	jz	.still
	cmp	ebx,3
	je	.2
	cmp	ebx,1
	jne	.still
;----------------------------------------------
; copy color type and value from shared area
	mov	eax,cd_com_area
	mov	ebx,[eax+16]
	mov	cd_color_type,ebx
	mov	ebx,[eax+20]
	mov	cd_color,ebx

	mov	cd_status,1
;----------------------------------------------
	jmp	.3
.2:
	mov	cd_status,0
	jmp	.3
.1:
	mov	cd_status,2
.3:
	mov	eax,cd_com_area
	mov	ebx,[eax+4]
	mov	cd_x_size,ebx
	mov	ebx,[eax+8]
	mov	cd_y_size, ebx

	call	.prepare_PID
	jz	@f
	mov	ecx,eax	; WINDOW SLOT
	mcall	18,3
@@:
ColorDialog_exit
;----------------------------------------------
.prepare_PID:
	mcall	9,cd_procinfo,-1
	mov	ecx,[ebx+30]	; PID
	mcall	18,21
	test	eax,eax
	ret
;----------------------------------------------
}
;*****************************************************************************