kolibrios-gitea/drivers/unfinished/bcm57xx.asm

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                                 ;;
;; Copyright (C) KolibriOS team 2004-2015. All rights reserved.    ;;
;; Distributed under terms of the GNU General Public License       ;;
;;                                                                 ;;
;;  Broadcom NetXtreme 57xx driver for KolibriOS                   ;;
;;                                                                 ;;
;;                                                                 ;;
;;          GNU GENERAL PUBLIC LICENSE                             ;;
;;             Version 2, June 1991                                ;;
;;                                                                 ;;
;; Broadcom's programmers's manual for the BCM57xx                 ;;
;; http://www.broadcom.com/collateral/pg/57XX-PG105-R.pdf          ;;
;;                                                                 ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

format PE DLL native
entry START

        CURRENT_API             = 0x0200
        COMPATIBLE_API          = 0x0100
        API_VERSION             = (COMPATIBLE_API shl 16) + CURRENT_API

        MAX_DEVICES             = 16

        __DEBUG__               = 1
        __DEBUG_LEVEL__         = 2

section '.flat' readable writable executable

include '../proc32.inc'
include '../struct.inc'
include '../macros.inc'
include '../fdo.inc'
include '../netdrv.inc'

struct  device          ETH_DEVICE

        mmio_addr       dd ?
        pci_bus         dd ?
        pci_dev         dd ?
        irq_line        db ?

        cur_tx          dd ?
        last_tx         dd ?

        rb 0x100 - ($ and 0xff) ; align 256
        rx_desc         rd 256/8

        rb 0x100 - ($ and 0xff) ; align 256
        tx_desc         rd 256/8

ends


;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                        ;;
;; proc START             ;;
;;                        ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;

proc START c, reason:dword, cmdline:dword

        cmp     [reason], DRV_ENTRY
        jne     .fail

        DEBUGF  1,"Loading driver\n"
        invoke  RegService, my_service, service_proc
        ret

  .fail:
        xor     eax, eax
        ret

endp



;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                        ;;
;; proc SERVICE_PROC      ;;
;;                        ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;

proc service_proc stdcall, ioctl:dword

        mov     edx, [ioctl]
        mov     eax, [edx + IOCTL.io_code]

;------------------------------------------------------

        cmp     eax, 0 ;SRV_GETVERSION
        jne     @F

        cmp     [edx + IOCTL.out_size], 4
        jb      .fail
        mov     eax, [edx + IOCTL.output]
        mov     [eax], dword API_VERSION

        xor     eax, eax
        ret

;------------------------------------------------------
  @@:
        cmp     eax, 1 ;SRV_HOOK
        jne     .fail

        cmp     [edx + IOCTL.inp_size], 3               ; Data input must be at least 3 bytes
        jb      .fail

        mov     eax, [edx + IOCTL.input]
        cmp     byte [eax], 1                           ; 1 means device number and bus number (pci) are given
        jne     .fail                                   ; other types arent supported for this card yet

; check if the device is already listed

        mov     esi, device_list
        mov     ecx, [devices]
        test    ecx, ecx
        jz      .firstdevice

;        mov     eax, [edx + IOCTL.input]                      ; get the pci bus and device numbers
        mov     ax, [eax+1]                             ;
  .nextdevice:
        mov     ebx, [esi]
        cmp     al, byte [ebx + device.pci_bus]
        jne     .next
        cmp     ah, byte [ebx + device.pci_dev]
        je      .find_devicenum                         ; Device is already loaded, let's find it's device number
  .next:
        add     esi, 4
        loop    .nextdevice


; This device doesnt have its own eth_device structure yet, lets create one
  .firstdevice:
        cmp     [devices], MAX_DEVICES                  ; First check if the driver can handle one more card
        jae     .fail

        allocate_and_clear ebx, sizeof.device, .fail      ; Allocate the buffer for device structure

; Fill in the direct call addresses into the struct

        mov     [ebx + device.reset], reset
        mov     [ebx + device.transmit], transmit
        mov     [ebx + device.unload], unload
        mov     [ebx + device.name], my_service

; save the pci bus and device numbers

        mov     eax, [edx + IOCTL.input]
        movzx   ecx, byte [eax+1]
        mov     [ebx + device.pci_bus], ecx
        movzx   ecx, byte [eax+2]
        mov     [ebx + device.pci_dev], ecx

; Now, it's time to find the base mmio addres of the PCI device

        stdcall PCI_find_mmio32, [ebx + device.pci_bus], [ebx + device.pci_dev]

; Create virtual mapping of the physical memory

        push    1Bh             ; PG_SW+PG_NOCACHE
        push    10000h          ; size of the map
        push    eax
        invoke  MapIoMem
        mov     [ebx + device.mmio_addr], eax

; We've found the mmio address, find IRQ now

        invoke  PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line
        mov     [ebx + device.irq_line], al

        DEBUGF  1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\
        [ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.mmio_addr]:8

; Ok, the eth_device structure is ready, let's probe the device
        call    probe                                                   ; this function will output in eax
        test    eax, eax
        jnz     .err                                                    ; If an error occured, exit

        mov     eax, [devices]                                          ; Add the device structure to our device list
        mov     [device_list+4*eax], ebx                                ; (IRQ handler uses this list to find device)
        inc     [devices]                                               ;

        mov     [ebx + device.type], NET_TYPE_ETH
        invoke  NetRegDev

        cmp     eax, -1
        je      .destroy

        ret

; If the device was already loaded, find the device number and return it in eax

  .find_devicenum:
        DEBUGF  1,"Trying to find device number of already registered device\n"
        invoke  NetPtrToNum                                             ; This kernel procedure converts a pointer to device struct in ebx
                                                                        ; into a device number in edi
        mov     eax, edi                                                ; Application wants it in eax instead
        DEBUGF  1,"Kernel says: %u\n", eax
        ret

; If an error occured, remove all allocated data and exit (returning -1 in eax)

  .destroy:
        ; todo: reset device into virgin state

  .err:
        invoke  KernelFree, ebx

  .fail:
        or      eax, -1
        ret

;------------------------------------------------------
endp


;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
;;                                                                        ;;
;;        Actual Hardware dependent code starts here                      ;;
;;                                                                        ;;
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;

unload:
        ; TODO: (in this particular order)
        ;
        ; - Stop the device
        ; - Detach int handler
        ; - Remove device from local list (device_list)
        ; - call unregister function in kernel
        ; - Remove all allocated structures and buffers the card used

        or      eax, -1

ret



;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;  probe: enables the device (if it really is BCM57XX)
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

probe:

        DEBUGF  1,"Probe\n"

; Make the device a bus master
        invoke  PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command
        or      al, PCI_CMD_MASTER
        invoke  PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax


        ; TODO: validate the device




reset:

        DEBUGF  1,"Reset\n"

        movzx   eax, [ebx + device.irq_line]
        DEBUGF  1,"Attaching int handler to irq %x\n", eax:1
        invoke  AttachIntHandler, eax, int_handler, ebx
        test    eax, eax
        jnz     @f
        DEBUGF  1,"\nCould not attach int handler!\n"
;        or      eax, -1
;        ret
  @@:

        call    read_mac

; Set the mtu, kernel will be able to send now
        mov     [ebx + device.mtu], 1514

; Set link state to unknown
        mov     [ebx + device.state], ETH_LINK_UNKNOWN

        ret




align 4
read_mac:

        DEBUGF  1,"Read MAC\n"

        mov     esi, [ebx + device.mmio_addr]
        lea     edi, [ebx + device.mac]
        movsd
        movsw

  .mac_ok:
        DEBUGF  1,"MAC = %x-%x-%x-%x-%x-%x\n",\
        [ebx + device.mac+0]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,[ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2

        ret


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                         ;;
;; Transmit                                ;;
;;                                         ;;
;; In: buffer pointer in [esp+4]           ;;
;;     size of buffer in [esp+8]           ;;
;;     pointer to device structure in ebx  ;;
;;                                         ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

proc transmit stdcall bufferptr, buffersize

        pushf
        cli

        DEBUGF  1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [buffersize]
        mov     eax, [bufferptr]
        DEBUGF  1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
        [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\
        [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\
        [eax+13]:2,[eax+12]:2

        cmp     [buffersize], 1514
        ja      .fail
        cmp     [buffersize], 60
        jb      .fail





; Update stats
        inc     [ebx + device.packets_tx]
        mov     eax, [buffersize]
        add     dword[ebx + device.bytes_tx], eax
        adc     dword[ebx + device.bytes_tx + 4], 0

        DEBUGF  1,"Transmit OK\n"
        popf
        xor     eax, eax
        ret

  .fail:
        DEBUGF  2,"Transmit failed\n"
        invoke  KernelFree, [bufferptr]
        popf
        or      eax, -1
        ret

endp


;;;;;;;;;;;;;;;;;;;;;;;
;;                   ;;
;; Interrupt handler ;;
;;                   ;;
;;;;;;;;;;;;;;;;;;;;;;;

align 4
int_handler:

        push    ebx esi edi

        DEBUGF  1,"INT\n"
;-------------------------------------------
; Find pointer of device wich made IRQ occur

        mov     ecx, [devices]
        test    ecx, ecx
        jz      .nothing
        mov     esi, device_list
  .nextdevice:
        mov     ebx, [esi]

;        mov     edi, [ebx + device.mmio_addr]
;        mov     eax, [edi + REG_ICR]
        test    eax, eax
        jnz     .got_it
  .continue:
        add     esi, 4
        dec     ecx
        jnz     .nextdevice
  .nothing:
        pop     edi esi ebx
        xor     eax, eax

        ret

  .got_it:

        DEBUGF  1,"Device: %x Status: %x ", ebx, eax

        pop     edi esi ebx
        xor     eax, eax
        inc     eax

        ret




; End of code

data fixups
end data

include '../peimport.inc'

my_service      db 'BCM57XX',0                   ; max 16 chars include zero

include_debug_strings                           ; All data wich FDO uses will be included here

align 4
devices         dd 0
device_list     rd MAX_DEVICES                  ; This list contains all pointers to device structures the driver is handling