kolibrios-gitea/kernel/trunk/network/eth_drv/rtl8139.inc

596 lines
24 KiB
PHP
Raw Normal View History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; RTL8139.INC ;;
;; ;;
;; Ethernet driver for Menuet OS ;;
;; ;;
;; Version 0.2 11 August 2003 ;;
;; ;;
;; Driver for chips of RealTek 8139 family ;;
;; References: ;;
;; www.realtek.com.hw - data sheets ;;
;; rtl8139.c - linux driver ;;
;; 8139too.c - linux driver ;;
;; ethernet driver template by Mike Hibbett ;;
;; ;;
;; The copyright statement is ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;; Copyright 2003 Endre Kozma, ;;
;; endre.kozma@axelero.hu ;;
;; ;;
;; See file COPYING for details ;;
;; ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
ETH_ALEN equ 6
ETH_HLEN equ (2 * ETH_ALEN + 2)
ETH_ZLEN equ 60 ; 60 + 4bytes auto payload for
; mininmum 64bytes frame length
PCI_REG_COMMAND equ 0x04 ; command register
PCI_BIT_PIO equ 0 ; bit0: io space control
PCI_BIT_MMIO equ 1 ; bit1: memory space control
PCI_BIT_MASTER equ 2 ; bit2: device acts as a PCI master
RTL8139_REG_MAR0 equ 0x08 ; multicast filter register 0
RTL8139_REG_MAR4 equ 0x0c ; multicast filter register 4
RTL8139_REG_TSD0 equ 0x10 ; transmit status of descriptor
RTL8139_REG_TSAD0 equ 0x20 ; transmit start address of descriptor
RTL8139_REG_RBSTART equ 0x30 ; RxBuffer start address
RTL8139_REG_COMMAND equ 0x37 ; command register
RTL8139_REG_CAPR equ 0x38 ; current address of packet read
RTL8139_REG_IMR equ 0x3c ; interrupt mask register
RTL8139_REG_ISR equ 0x3e ; interrupt status register
RTL8139_REG_TXCONFIG equ 0x40 ; transmit configuration register
RTL8139_REG_TXCONFIG_0 equ 0x40 ; transmit configuration register 0
RTL8139_REG_TXCONFIG_1 equ 0x41 ; transmit configuration register 1
RTL8139_REG_TXCONFIG_2 equ 0x42 ; transmit configuration register 2
RTL8139_REG_TXCONFIG_3 equ 0x43 ; transmit configuration register 3
RTL8139_REG_RXCONFIG equ 0x44 ; receive configuration register 0
RTL8139_REG_RXCONFIG_0 equ 0x44 ; receive configuration register 0
RTL8139_REG_RXCONFIG_1 equ 0x45 ; receive configuration register 1
RTL8139_REG_RXCONFIG_2 equ 0x46 ; receive configuration register 2
RTL8139_REG_RXCONFIG_3 equ 0x47 ; receive configuration register 3
RTL8139_REG_MPC equ 0x4c ; missed packet counter
RTL8139_REG_9346CR equ 0x50 ; serial eeprom 93C46 command register
RTL8139_REG_CONFIG1 equ 0x52 ; configuration register 1
RTL8139_REG_CONFIG4 equ 0x5a ; configuration register 4
RTL8139_REG_HLTCLK equ 0x5b ; undocumented halt clock register
RTL8139_REG_BMCR equ 0x62 ; basic mode control register
RTL8139_REG_ANAR equ 0x66 ; auto negotiation advertisement register
; 5.1 packet header
RTL8139_BIT_RUNT equ 4 ; total packet length < 64 bytes
RTL8139_BIT_LONG equ 3 ; total packet length > 4k
RTL8139_BIT_CRC equ 2 ; crc error occured
RTL8139_BIT_FAE equ 1 ; frame alignment error occured
RTL8139_BIT_ROK equ 0 ; received packet is ok
; 5.4 command register
RTL8139_BIT_RST equ 4 ; reset bit
RTL8139_BIT_RE equ 3 ; receiver enabled
RTL8139_BIT_TE equ 2 ; transmitter enabled
RTL8139_BIT_BUFE equ 0 ; rx buffer is empty, no packet stored
; 5.6 interrupt status register
RTL8139_BIT_ISR_TOK equ 2 ; transmit ok
RTL8139_BIT_ISR_RER equ 1 ; receive error interrupt
RTL8139_BIT_ISR_ROK equ 0 ; receive ok
; 5.7 transmit configyration register
RTL8139_BIT_TX_MXDMA equ 8 ; Max DMA burst size per Tx DMA burst
RTL8139_BIT_TXRR equ 4 ; Tx Retry count 16+(TXRR*16)
; 5.8 receive configuration register
RTL8139_BIT_RXFTH equ 13 ; Rx fifo threshold
RTL8139_BIT_RBLEN equ 11 ; Ring buffer length indicator
RTL8139_BIT_RX_MXDMA equ 8 ; Max DMA burst size per Rx DMA burst
RTL8139_BIT_NOWRAP equ 7 ; transfered data wrapping
RTL8139_BIT_9356SEL equ 6 ; eeprom selector 9346/9356
RTL8139_BIT_AER equ 5 ; accept error packets
RTL8139_BIT_AR equ 4 ; accept runt packets
RTL8139_BIT_AB equ 3 ; accept broadcast packets
RTL8139_BIT_AM equ 2 ; accept multicast packets
RTL8139_BIT_APM equ 1 ; accept physical match packets
RTL8139_BIT_AAP equ 0 ; accept all packets
; 5.9 93C46/93C56 command register
RTL8139_BIT_93C46_EEM1 equ 7 ; RTL8139 eeprom operating mode1
RTL8139_BIT_93C46_EEM0 equ 6 ; RTL8139 eeprom operating mode0
RTL8139_BIT_93C46_EECS equ 3 ; chip select
RTL8139_BIT_93C46_EESK equ 2 ; serial data clock
RTL8139_BIT_93C46_EEDI equ 1 ; serial data input
RTL8139_BIT_93C46_EEDO equ 0 ; serial data output
; 5.11 configuration register 1
RTL8139_BIT_LWACT equ 4 ; see RTL8139_REG_CONFIG1
RTL8139_BIT_SLEEP equ 1 ; sleep bit at older chips
RTL8139_BIT_PWRDWN equ 0 ; power down bit at older chips
RTL8139_BIT_PMEn equ 0 ; power management enabled
; 5.14 configuration register 4
RTL8139_BIT_LWPTN equ 2 ; see RTL8139_REG_CONFIG4
; 6.2 transmit status register
RTL8139_BIT_ERTXTH equ 16 ; early TX threshold
RTL8139_BIT_TOK equ 15 ; transmit ok
RTL8139_BIT_OWN equ 13 ; tx DMA operation is completed
; 6.18 basic mode control register
RTL8139_BIT_ANE equ 12 ; auto negotiation enable
; 6.20 auto negotiation advertisement register
RTL8139_BIT_TXFD equ 8 ; 100base-T full duplex
RTL8139_BIT_TX equ 7 ; 100base-T
RTL8139_BIT_10FD equ 6 ; 10base-T full duplex
RTL8139_BIT_10 equ 5 ; 10base-T
RTL8139_BIT_SELECTOR equ 0 ; binary encoded selector CSMA/CD=00001
; RX/TX buffer size
RTL8139_RBLEN equ 0 ; 0==8K 1==16k 2==32k 3==64k
RTL8139_RX_BUFFER_SIZE equ (8192 shl RTL8139_RBLEN)
MAX_ETH_FRAME_SIZE equ 1516 ; exactly 1514 wthout CRC
RTL8139_NUM_TX_DESC equ 4
RTL8139_TX_BUFFER_SIZE equ (MAX_ETH_FRAME_SIZE * RTL8139_NUM_TX_DESC)
RTL8139_TXRR equ 8 ; total retries = 16+(TXRR*16)
RTL8139_TX_MXDMA equ 6 ; 0==16 1==32 2==64 3==128
; 4==256 5==512 6==1024 7==2048
RTL8139_ERTXTH equ 8 ; in unit of 32 bytes e.g:(8*32)=256
RTL8139_RX_MXDMA equ 7 ; 0==16 1==32 2==64 3==128
; 4==256 5==512 6==1024 7==unlimited
RTL8139_RXFTH equ 7 ; 0==16 1==32 2==64 3==128
; 4==256 5==512 6==1024 7==no threshold
RTL8139_RX_CONFIG equ ((RTL8139_RBLEN shl RTL8139_BIT_RBLEN) \
or (RTL8139_RX_MXDMA shl RTL8139_BIT_RX_MXDMA) \
or (1 shl RTL8139_BIT_NOWRAP) \
or (RTL8139_RXFTH shl RTL8139_BIT_RXFTH) \
or (1 shl RTL8139_BIT_AB) or (1 shl RTL8139_BIT_APM) \
or (1 shl RTL8139_BIT_AER) or (1 shl RTL8139_BIT_AR) \
or (1 shl RTL8139_BIT_AM))
RTL8139_TX_TIMEOUT equ 30 ; 300 milliseconds timeout
EE_93C46_REG_ETH_ID equ 7 ; MAC offset
EE_93C46_READ_CMD equ (6 shl 6) ; 110b + 6bit address
EE_93C56_READ_CMD equ (6 shl 8) ; 110b + 8bit address
EE_93C46_CMD_LENGTH equ 9 ; start bit + cmd + 6bit address
EE_93C56_CMD_LENGTH equ 11 ; start bit + cmd + 8bit ddress
VER_RTL8139 equ 1100000b
VER_RTL8139A equ 1110000b
; VER_RTL8139AG equ 1110100b
VER_RTL8139B equ 1111000b
VER_RTL8130 equ VER_RTL8139B
VER_RTL8139C equ 1110100b
VER_RTL8100 equ 1111010b
VER_RTL8100B equ 1110101b
VER_RTL8139D equ VER_RTL8100B
VER_RTL8139CP equ 1110110b
VER_RTL8101 equ 1110111b
IDX_RTL8139 equ 0
IDX_RTL8139A equ 1
IDX_RTL8139B equ 2
IDX_RTL8139C equ 3
IDX_RTL8100 equ 4
IDX_RTL8139D equ 5
IDX_RTL8139D equ 6
IDX_RTL8101 equ 7
; These two must be 4 byte aligned ( which they are )
rtl8139_rx_buff equ eth_data_start
rtl8139_tx_buff equ rtl8139_rx_buff + (RTL8139_RX_BUFFER_SIZE + MAX_ETH_FRAME_SIZE)
uglobal
align 4
rtl8139_rx_buff_offset: dd 0
curr_tx_desc: dd 0
endg
iglobal
hw_ver_array: db VER_RTL8139, VER_RTL8139A, VER_RTL8139B, VER_RTL8139C
db VER_RTL8100, VER_RTL8139D, VER_RTL8139CP, VER_RTL8101
HW_VER_ARRAY_SIZE = $-hw_ver_array
endg
uglobal
hw_ver_id: db 0
endg
;***************************************************************************
; Function
; rtl8139_probe
; Description
; Searches for an ethernet card, enables it and clears the rx buffer
; If a card was found, it enables the ethernet -> TCPIP link
; Destroyed registers
; eax, ebx, ecx, edx
;
;***************************************************************************
rtl8139_probe:
; enable the device
mov al, 2
mov ah, [pci_bus]
mov bh, [pci_dev]
mov bl, PCI_REG_COMMAND
call pci_read_reg
mov cx, ax
or cl, (1 shl PCI_BIT_MASTER) or (1 shl PCI_BIT_PIO)
and cl, not (1 shl PCI_BIT_MMIO)
mov al, 2
mov ah, [pci_bus]
mov bh, [pci_dev]
mov bl, PCI_REG_COMMAND
call pci_write_reg
; get chip version
mov edx, [io_addr]
add edx, RTL8139_REG_TXCONFIG_2
in ax, dx
shr ah, 2
shr ax, 6
and al, 01111111b
mov ecx, HW_VER_ARRAY_SIZE-1
.chip_ver_loop:
cmp al, [hw_ver_array+ecx]
je .chip_ver_found
dec ecx
jns .chip_ver_loop
xor cl, cl ; default RTL8139
.chip_ver_found:
mov [hw_ver_id], cl
; wake up the chip
mov edx, [io_addr]
add edx, RTL8139_REG_HLTCLK
mov al, 'R' ; run the clock
out dx, al
; unlock config and BMCR registers
add edx, RTL8139_REG_9346CR - RTL8139_REG_HLTCLK
mov al, (1 shl RTL8139_BIT_93C46_EEM1) or (1 shl RTL8139_BIT_93C46_EEM0)
out dx, al
; enable power management
add edx, RTL8139_REG_CONFIG1 - RTL8139_REG_9346CR
in al, dx
cmp byte [hw_ver_id], IDX_RTL8139B
jl .old_chip
; set LWAKE pin to active high (default value).
; it is for Wake-On-LAN functionality of some motherboards.
; this signal is used to inform the motherboard to execute a wake-up process.
; only at newer chips.
or al, (1 shl RTL8139_BIT_PMEn)
and al, not (1 shl RTL8139_BIT_LWACT)
out dx, al
add edx, RTL8139_REG_CONFIG4 - RTL8139_REG_CONFIG1
in al, dx
and al, not (1 shl RTL8139_BIT_LWPTN)
out dx, al
jmp .finish_wake_up
.old_chip:
; wake up older chips
and al, not ((1 shl RTL8139_BIT_SLEEP) or (1 shl RTL8139_BIT_PWRDWN))
out dx, al
.finish_wake_up:
; lock config and BMCR registers
xor al, al
mov edx, [io_addr]
add edx, RTL8139_REG_9346CR
out dx, al
;***************************************************************************
; Function
; rt8139_reset
; Description
; Place the chip (ie, the ethernet card) into a virgin state
; Destroyed registers
; eax, ebx, ecx, edx
;
;***************************************************************************
rtl8139_reset:
mov edx, [io_addr]
add edx, RTL8139_REG_COMMAND
mov al, 1 shl RTL8139_BIT_RST
out dx, al
mov cx, 1000 ; wait no longer for the reset
.wait_for_reset:
in al, dx
test al, 1 shl RTL8139_BIT_RST
jz .reset_completed ; RST remains 1 during reset
dec cx
jns .wait_for_reset
.reset_completed:
; get MAC (hardware address)
mov ecx, 2
.mac_read_loop:
lea eax, [EE_93C46_REG_ETH_ID+ecx]
push ecx
call rtl8139_read_eeprom
pop ecx
mov [node_addr+ecx*2], ax
dec ecx
jns .mac_read_loop
; unlock config and BMCR registers
mov edx, [io_addr]
add edx, RTL8139_REG_9346CR
mov al, (1 shl RTL8139_BIT_93C46_EEM1) or (1 shl RTL8139_BIT_93C46_EEM0)
out dx, al
; initialize multicast registers (no filtering)
mov eax, 0xffffffff
add edx, RTL8139_REG_MAR0 - RTL8139_REG_9346CR
out dx, eax
add edx, RTL8139_REG_MAR4 - RTL8139_REG_MAR0
out dx, eax
; enable Rx/Tx
mov al, (1 shl RTL8139_BIT_RE) or (1 shl RTL8139_BIT_TE)
add edx, RTL8139_REG_COMMAND - RTL8139_REG_MAR4
out dx, al
; 32k Rxbuffer, unlimited dma burst, no wrapping, no rx threshold
; accept broadcast packets, accept physical match packets
mov ax, RTL8139_RX_CONFIG
add edx, RTL8139_REG_RXCONFIG - RTL8139_REG_COMMAND
out dx, ax
; 1024 bytes DMA burst, total retries = 16 + 8 * 16 = 144
mov ax, (RTL8139_TX_MXDMA shl RTL8139_BIT_TX_MXDMA) \
or (RTL8139_TXRR shl RTL8139_BIT_TXRR)
add edx, RTL8139_REG_TXCONFIG - RTL8139_REG_RXCONFIG
out dx, ax
; enable auto negotiation
add edx, RTL8139_REG_BMCR - RTL8139_REG_TXCONFIG
in ax, dx
or ax, (1 shl RTL8139_BIT_ANE)
out dx, ax
; set auto negotiation advertisement
add edx, RTL8139_REG_ANAR - RTL8139_REG_BMCR
in ax, dx
or ax, (1 shl RTL8139_BIT_SELECTOR) or (1 shl RTL8139_BIT_10) \
or (1 shl RTL8139_BIT_10FD) or (1 shl RTL8139_BIT_TX) \
or (1 shl RTL8139_BIT_TXFD)
out dx, ax
; lock config and BMCR registers
xor eax, eax
add edx, RTL8139_REG_9346CR - RTL8139_REG_ANAR
out dx, al
; init RX/TX pointers
mov [rtl8139_rx_buff_offset], eax
mov [curr_tx_desc], eax
; clear missing packet counter
add edx, RTL8139_REG_MPC - RTL8139_REG_9346CR
out dx, eax
; disable all interrupts
add edx, RTL8139_REG_IMR - RTL8139_REG_MPC
out dx, ax
; set RxBuffer address, init RX buffer offset, init TX ring
mov eax, rtl8139_rx_buff
add edx, RTL8139_REG_RBSTART - RTL8139_REG_IMR
out dx, eax
; Indicate that we have successfully reset the card
mov eax, [pci_data]
mov [eth_status], eax
ret
;***************************************************************************
; Function
; rtl8139_read_eeprom
; Description
; reads eeprom type 93c46 and 93c56
; Parameters
; al - word to be read (6bit in case of 93c46 and 8bit otherwise)
; Return value
; ax - word read in
; Destroyed register(s)
; eax, cx, ebx, edx
;
;***************************************************************************
rtl8139_read_eeprom:
movzx ebx, al
mov edx, [io_addr]
add edx, RTL8139_REG_RXCONFIG
in al, dx
test al, (1 shl RTL8139_BIT_9356SEL)
jz .type_93c46
; and bl, 01111111b ; don't care first bit
or bx, EE_93C56_READ_CMD ; it contains start bit
mov cx, EE_93C56_CMD_LENGTH-1 ; cmd_loop counter
jmp .read_eeprom
.type_93c46:
and bl, 00111111b
or bx, EE_93C46_READ_CMD ; it contains start bit
mov cx, EE_93C46_CMD_LENGTH-1 ; cmd_loop counter
.read_eeprom:
add edx, RTL8139_REG_9346CR - RTL8139_REG_RXCONFIG_0
; mov al, (1 shl RTL8139_BIT_93C46_EEM1)
; out dx, al
mov al, (1 shl RTL8139_BIT_93C46_EEM1) \
or (1 shl RTL8139_BIT_93C46_EECS) ; wake up the eeprom
out dx, al
.cmd_loop:
mov al, (1 shl RTL8139_BIT_93C46_EEM1) or (1 shl RTL8139_BIT_93C46_EECS)
bt bx, cx
jnc .zero_bit
or al, (1 shl RTL8139_BIT_93C46_EEDI)
.zero_bit:
out dx, al
; push eax
; in eax, dx ; eeprom delay
; pop eax
or al, (1 shl RTL8139_BIT_93C46_EESK)
out dx, al
; in eax, dx ; eeprom delay
dec cx
jns .cmd_loop
; in eax, dx ; eeprom delay
mov al, (1 shl RTL8139_BIT_93C46_EEM1) or (1 shl RTL8139_BIT_93C46_EECS)
out dx, al
mov cl, 0xf
.read_loop:
shl ebx, 1
mov al, (1 shl RTL8139_BIT_93C46_EEM1) \
or (1 shl RTL8139_BIT_93C46_EECS) \
or (1 shl RTL8139_BIT_93C46_EESK)
out dx, al
; in eax, dx ; eeprom delay
in al, dx
and al, (1 shl RTL8139_BIT_93C46_EEDO)
jz .dont_set
inc ebx
.dont_set:
mov al, (1 shl RTL8139_BIT_93C46_EEM1) \
or (1 shl RTL8139_BIT_93C46_EECS)
out dx, al
; in eax, dx ; eeprom delay
dec cl
jns .read_loop
xor al, al
out dx, al
mov ax, bx
ret
;***************************************************************************
; Function
; rtl8139_transmit
; Description
; Transmits a packet of data via the ethernet card
; Pointer to 48 bit destination address in edi
; Type of packet in bx
; size of packet in ecx
; pointer to packet data in esi
; Destroyed registers
; eax, edx, esi, edi
; ToDo
; for waiting of timeout the rtl8139 internal timer
; should be used
;
;***************************************************************************
rtl8139_transmit:
cmp ecx, MAX_ETH_FRAME_SIZE
jg .finish ; packet is too long
push ecx
; check descriptor
mov ecx, [curr_tx_desc]
mov edx, [io_addr]
lea edx, [edx+ecx*4+RTL8139_REG_TSD0]
push edx ebx
in ax, dx
and ax, (1 shl RTL8139_BIT_TOK) or (1 shl RTL8139_BIT_OWN)
cmp ax, (1 shl RTL8139_BIT_TOK) or (1 shl RTL8139_BIT_OWN)
jz .send_packet
test ax, 0x1fff ; or no size given
jz .send_packet
; wait for timeout
mov ebx, RTL8139_TX_TIMEOUT
mov eax, 0x5 ; delay x/100 secs
int 0x40
in ax, dx
and ax, (1 shl RTL8139_BIT_TOK) or (1 shl RTL8139_BIT_OWN)
cmp ax, (1 shl RTL8139_BIT_TOK) or (1 shl RTL8139_BIT_OWN)
jz .send_packet
; chip hung, reset it
call rtl8139_reset
; reset the card
.send_packet:
; calculate tx_buffer address
pop ebx
push esi
mov eax, MAX_ETH_FRAME_SIZE
mul dword [curr_tx_desc]
mov esi, edi
lea edi, [rtl8139_tx_buff+eax]
mov eax, edi
cld
; copy destination address
movsd
movsw
; copy source address
mov esi, node_addr
movsd
movsw
; copy packet type
mov [edi], bx
add edi, 2
; copy the packet data
pop esi edx ecx
push ecx
shr ecx, 2
rep movsd
pop ecx
push ecx
and ecx, 3
rep movsb
; set address
add edx, RTL8139_REG_TSAD0 - RTL8139_REG_TSD0
out dx, eax
; set size and early threshold
pop eax ; pick up the size
add eax, ETH_HLEN
cmp eax, ETH_ZLEN
jnc .no_pad
mov eax, ETH_ZLEN
.no_pad:
or eax, (RTL8139_ERTXTH shl RTL8139_BIT_ERTXTH)
add edx, RTL8139_REG_TSD0 - RTL8139_REG_TSAD0
out dx, eax
; get next descriptor 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, ...
inc dword [curr_tx_desc]
and dword [curr_tx_desc], 3
.finish:
ret
;***************************************************************************
; Function
; rtl8139_poll
;
; Description
; Polls the ethernet card for a received packet
; Received data, if any, ends up in Ether_buffer
; Destroyed register(s)
; eax, edx, ecx
;
;***************************************************************************
rtl8139_poll:
mov word [eth_rx_data_len], 0
mov edx, [io_addr]
add edx, RTL8139_REG_COMMAND
in al, dx
test al, (1 shl RTL8139_BIT_BUFE)
jnz .finish
; new packet received copy it from rx_buffer into Ether_buffer
mov eax, rtl8139_rx_buff
add eax, [rtl8139_rx_buff_offset]
; check if packet is ok
test byte [eax], (1 shl RTL8139_BIT_ROK)
jz .reset_rx
; packet is ok copy it into the Ether_buffer
movzx ecx, word [eax+2] ; packet length
sub ecx, 4 ; don't copy CRC
mov word [eth_rx_data_len], cx
push ecx
shr ecx, 2 ; first copy dword-wise
lea esi, [eax+4] ; don't copy the packet header
mov edi, Ether_buffer
cld
rep movsd ; copy the dwords
pop ecx
and ecx, 3
rep movsb ; copy the rest bytes
; update rtl8139_rx_buff_offset
movzx eax, word [eax+2] ; packet length
add eax, [rtl8139_rx_buff_offset]
add eax, 4+3 ; packet header is 4 bytes long + dword alignment
and eax, not 3 ; dword alignment
cmp eax, RTL8139_RX_BUFFER_SIZE
jl .no_wrap
sub eax, RTL8139_RX_BUFFER_SIZE
.no_wrap:
mov [rtl8139_rx_buff_offset], eax
; update CAPR register
sub eax, 0x10 ; value 0x10 is a constant for CAPR
add edx, RTL8139_REG_CAPR - RTL8139_REG_COMMAND
out dx, ax
.finish:
; clear active interrupt sources
mov edx, [io_addr]
add edx, RTL8139_REG_ISR
in ax, dx
out dx, ax
ret
.reset_rx:
in al, dx ; read command register
push eax
and al, not (1 shl RTL8139_BIT_RE)
out dx, al
pop eax
out dx, al
add edx, RTL8139_REG_RXCONFIG - RTL8139_REG_COMMAND
mov ax, RTL8139_RX_CONFIG
out dx, ax
ret