forked from KolibriOS/kolibrios
kolibri-ahci: upload first results on AHCI support
git-svn-id: svn://kolibrios.org@9020 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
parent
73864ff1d7
commit
21816f5c0b
190
kernel/branches/kolibri-ahci/blkdev/ahci.inc
Normal file
190
kernel/branches/kolibri-ahci/blkdev/ahci.inc
Normal file
@ -0,0 +1,190 @@
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;; ;;
|
||||
;; Copyright (C) KolibriOS team 2004-2021. All rights reserved. ;;
|
||||
;; Distributed under terms of the GNU General Public License ;;
|
||||
;; ;;
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
|
||||
$Revision$
|
||||
|
||||
PCI_REG_STATUS_COMMAND = 0x0004
|
||||
PCI_REG_BAR5 = 0x0024
|
||||
|
||||
AHCI_BOHCf_BOS = 0 ; BIOS-Owned Semaphore (BIOS owns controller)
|
||||
AHCI_BOHCf_OOS = 1 ; OS-Owned Semaphore (OS owns controller)
|
||||
AHCI_BOHCf_BB = 4 ; BIOS Busy (polling bit while BIOS cleans up
|
||||
|
||||
AHCI_CAP2_BOH = 0 ; number of bit in BOH which shows Supports BIOS/OS Handoff
|
||||
|
||||
HBA_MEMORY_SIZE = 0x1100
|
||||
|
||||
struct AHCI_DATA
|
||||
;;
|
||||
abar dd ? ; pointer to HBA Memory (BAR5) mapped to virtual kernelspace memory
|
||||
pcidev dd ? ; pointer to corresponding PCIDEV structure
|
||||
ends
|
||||
|
||||
; Generic Host Control registers
|
||||
struct HBA_MEM
|
||||
capability dd ? ; 0x00
|
||||
global_host_control dd ? ; 0x04
|
||||
interrupt_status dd ? ; 0x08
|
||||
port_implemented dd ? ; 0x0C
|
||||
version dd ? ; 0x10
|
||||
ccc_ctl dd ? ; 0x14, Command completion coalescing control
|
||||
ccc_pts dd ? ; 0x18, Command completion coalescing ports
|
||||
em_loc dd ? ; 0x1C, Enclosure management location
|
||||
em_ctl dd ? ; 0x20, Enclosure management control
|
||||
capability2 dd ? ; 0x24, Host capabilities extended
|
||||
bohc dd ? ; 0x28, BIOS/OS handoff control and status
|
||||
reserved rb (0xA0-0x2C) ; 0x2C - 0x9F, Reserved
|
||||
vendor rb (0x100-0xA0) ; 0xA0 - 0xFF, Vendor specific
|
||||
ports rb (sizeof.HBA_PORT*32) ; 0x100 - 0x10FF, Port control registers, max 32
|
||||
ends
|
||||
|
||||
; Port Control registers
|
||||
struct HBA_PORT
|
||||
command_list_base_l dd ? ; 0x00, command list base address, 1K-byte aligned
|
||||
command_list_base_h dd ? ; 0x04, command list base address upper 32 bits, used on 64 bit systems
|
||||
fis_base_l dd ? ; 0x08, FIS base address, 256-byte aligned
|
||||
fis_base_h dd ? ; 0x0C, FIS base address upper 32 bits, used on 64 bit systems
|
||||
interrupt_status dd ? ; 0x10
|
||||
interrupt_enable dd ? ; 0x14
|
||||
command dd ? ; 0x18, command and status
|
||||
reserved0 dd ? ; 0x1C
|
||||
task_file_data dd ? ; 0x20
|
||||
signature dd ? ; 0x24
|
||||
sata_status dd ? ; 0x28, SATA status (SCR0:SStatus)
|
||||
sata_control dd ? ; 0x2C, SATA control (SCR2:SControl)
|
||||
sata_error dd ? ; 0x30, SATA error (SCR1:SError)
|
||||
sata_active dd ? ; 0x34, SATA active (SCR3:SActive)
|
||||
command_issue dd ? ; 0x38
|
||||
sata_notification dd ? ; 0x3C, SATA notification (SCR4:SNotification)
|
||||
fis_based_switch_control dd ? ; 0x40
|
||||
reserved1 rd 11 ; 0x44 - 0x6F
|
||||
vendor rd 4 ; 0x70 - 0x7F, vendor specific
|
||||
ends
|
||||
|
||||
uglobal
|
||||
align 4
|
||||
ahci_controller AHCI_DATA
|
||||
endg
|
||||
|
||||
|
||||
; detect ahci controller and initialize
|
||||
align 4
|
||||
init_ahci:
|
||||
mov ecx, ahci_controller
|
||||
mov esi, pcidev_list
|
||||
.find_ahci_ctr:
|
||||
mov esi, [esi + PCIDEV.fd]
|
||||
cmp esi, pcidev_list
|
||||
jz .ahci_ctr_not_found
|
||||
mov eax, [esi + PCIDEV.class]
|
||||
;DEBUGF 1, "K: device class = %x\n", eax
|
||||
shr eax, 8 ; shift right because lowest 8 bits if ProgIf field
|
||||
cmp eax, 0x0106 ; 0x01 - Mass Storage Controller class, 0x06 - Serial ATA Controller subclass
|
||||
jz .ahci_ctr_found
|
||||
jmp .find_ahci_ctr
|
||||
|
||||
.ahci_ctr_not_found:
|
||||
DEBUGF 1, "K: AHCI controller not found\n"
|
||||
ret
|
||||
|
||||
.ahci_ctr_found:
|
||||
mov [ahci_controller + AHCI_DATA.pcidev], esi
|
||||
|
||||
mov eax, [esi+PCIDEV.class]
|
||||
movzx ebx, byte [esi+PCIDEV.bus]
|
||||
movzx ecx, byte [esi+PCIDEV.devfn]
|
||||
shr ecx, 3 ; get rid of 3 lowest bits (function code), the rest bits is device code
|
||||
movzx edx, byte [esi+PCIDEV.devfn]
|
||||
and edx, 00000111b ; get only 3 lowest bits (function code)
|
||||
DEBUGF 1, "K: found AHCI controller, (class, subcl, progif) = %x, bus = %x, device = %x, function = %x\n", eax, ebx, ecx, edx
|
||||
|
||||
mov ah, [esi + PCIDEV.bus]
|
||||
mov al, 2 ; read dword
|
||||
mov bh, [esi + PCIDEV.devfn]
|
||||
mov bl, PCI_REG_BAR5
|
||||
call pci_read_reg
|
||||
DEBUGF 1, "K: AHCI controller BAR5 = %x\n", eax
|
||||
|
||||
stdcall map_io_mem, eax, HBA_MEMORY_SIZE, PG_SWR + PG_NOCACHE
|
||||
mov [ahci_controller + AHCI_DATA.abar], eax
|
||||
DEBUGF 1, "K: AHCI controller BAR5 mapped to virtual addr %x\n", eax
|
||||
|
||||
mov ah, [esi + PCIDEV.bus]
|
||||
mov al, 2 ; read dword
|
||||
mov bh, [esi + PCIDEV.devfn]
|
||||
mov bl, PCI_REG_STATUS_COMMAND
|
||||
call pci_read_reg
|
||||
DEBUGF 1, "K: AHCI: pci_status_command = %x\nEnabling interrupts, DMA bus mastering and memory space access\n", eax
|
||||
or eax, 0x06 ; pci.command |= 0x06 (dma bus mastering + memory space access)
|
||||
btr eax, 10 ; clear the "disable interrupts" bit
|
||||
DEBUGF 1, "K: AHCI: pci_status_command = %x\n", eax
|
||||
mov ecx, eax
|
||||
mov ah, [esi + PCIDEV.bus]
|
||||
mov al, 2 ; write dword
|
||||
mov bh, [esi + PCIDEV.devfn]
|
||||
mov bl, PCI_REG_STATUS_COMMAND
|
||||
call pci_write_reg
|
||||
|
||||
mov eax, [ahci_controller + AHCI_DATA.abar]
|
||||
mov ebx, [eax + HBA_MEM.capability]
|
||||
mov ecx, [eax + HBA_MEM.global_host_control]
|
||||
mov edx, [eax + HBA_MEM.version]
|
||||
DEBUGF 1, "K: AHCI: HBA.cap = %x, HBA.ghc = %x, HBA_MEM.version = %x\n", ebx, ecx, edx
|
||||
|
||||
; //Transferring ownership from BIOS if supported.
|
||||
; if (Bt(&hba->caps_ext, AHCI_CAPSEXTf_BOH))
|
||||
; {
|
||||
; Bts(&hba->bohc, AHCI_BOHCf_OOS);
|
||||
; "AHCI: Transferring ownership from BIOS\n";
|
||||
|
||||
; while (Bt(&hba->bohc, AHCI_BOHCf_BOS));
|
||||
|
||||
; Sleep(25);
|
||||
; if (Bt(&hba->bohc, AHCI_BOHCf_BB)) //if Bios Busy is still set after 25 mS, wait 2 seconds.
|
||||
; Sleep(2000);
|
||||
; }
|
||||
|
||||
; Transferring ownership from BIOS if supported. (TODO check)
|
||||
mov eax, [ahci_controller + AHCI_DATA.abar]
|
||||
mov ebx, [eax + HBA_MEM.capability2]
|
||||
DEBUGF 1, "K: AHCI: HBA_MEM.cap2 = %x\n", ebx
|
||||
bt dword [eax + HBA_MEM.capability2], AHCI_CAP2_BOH
|
||||
jnc .end_handoff
|
||||
DEBUGF 1, "K: AHCI: Transferring ownership from BIOS...\n"
|
||||
bts dword [eax + HBA_MEM.bohc], AHCI_BOHCf_OOS
|
||||
|
||||
.wait_not_bos:
|
||||
bt dword [eax + HBA_MEM.bohc], AHCI_BOHCf_BOS
|
||||
jc .wait_not_bos
|
||||
|
||||
mov ebx, 3
|
||||
call delay_hs
|
||||
|
||||
; if Bios Busy is still set after 25 mS, wait 2 seconds.
|
||||
bt dword [eax + HBA_MEM.bohc], AHCI_BOHCf_BB
|
||||
jnc @f
|
||||
|
||||
mov ebx, 200
|
||||
call delay_hs
|
||||
@@:
|
||||
DEBUGF 1, "K: AHCI: Done.\n"
|
||||
|
||||
.end_handoff:
|
||||
|
||||
;; TODO: Reset controller ?
|
||||
|
||||
;; TODO enble AHCI ? (see https://github.com/ZenithOS/ZenithOS/blob/4ea8b133613ab95a8b53ed543d8e63525a21954e/src/Kernel/BlkDev/DiskAHCI.CC#L719)
|
||||
|
||||
;; TODO: find drives (see https://github.com/ZenithOS/ZenithOS/blob/4ea8b133613ab95a8b53ed543d8e63525a21954e/src/Kernel/BlkDev/DiskAHCI.CC#L742)
|
||||
|
||||
ret
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
9
kernel/branches/kolibri-ahci/build2.sh
Executable file
9
kernel/branches/kolibri-ahci/build2.sh
Executable file
@ -0,0 +1,9 @@
|
||||
#!/bin/sh
|
||||
KERPACK=/home/programist/KOS_SVN/programs/other/kpack/kerpack_linux/kerpack
|
||||
KOLIBRI_IMG=kolibri_test2.img
|
||||
|
||||
echo 'lang fix en' > lang.inc
|
||||
fasm -m 65536 bootbios.asm bootbios.bin
|
||||
fasm -m 65536 kernel.asm kernel.mnt
|
||||
$KERPACK kernel.mnt kernel.mnt
|
||||
mcopy -D o -i $KOLIBRI_IMG kernel.mnt ::kernel.mnt
|
@ -814,6 +814,13 @@ include 'detect/dev_fd.inc'
|
||||
;-----------------------------------------------------------------------------
|
||||
include 'detect/init_ata.inc'
|
||||
;-----------------------------------------------------------------------------
|
||||
; initialisation AHCI code
|
||||
;-----------------------------------------------------------------------------
|
||||
jmp ahci_code_end
|
||||
include 'blkdev/ahci.inc'
|
||||
ahci_code_end:
|
||||
call init_ahci
|
||||
;-----------------------------------------------------------------------------
|
||||
if 0
|
||||
mov ax, [BOOT.sys_disk]
|
||||
cmp ax, 'r1'; if using not ram disk, then load librares and parameters {SPraid.simba}
|
||||
|
1
kernel/branches/kolibri-ahci/run_img.sh
Executable file
1
kernel/branches/kolibri-ahci/run_img.sh
Executable file
@ -0,0 +1 @@
|
||||
qemu-system-i386 -m 256 -fda kolibri_test2.img -boot a -vga vmware -net nic,model=rtl8139 -net user -soundhw ac97 -usb -usbdevice tablet -enable-kvm -drive file=fat:rw:.
|
1
kernel/branches/kolibri-ahci/run_img_ahci.sh
Executable file
1
kernel/branches/kolibri-ahci/run_img_ahci.sh
Executable file
@ -0,0 +1 @@
|
||||
qemu-system-i386 -m 256 -M q35 -fda kolibri_test2.img -boot a -vga vmware -net nic,model=rtl8139 -net user -soundhw ac97 -usb -usbdevice tablet -enable-kvm -drive file=fat:rw:.
|
Loading…
Reference in New Issue
Block a user