ace-dent/kolibrios-gitea
1
0
Fork 0
forked from KolibriOS/kolibrios
Code Pull Requests Activity

Some more bugfixes and cleanup of RTL8029 driver.

Browse Source 
Driver works on real hardware, but is not stable yet.

git-svn-id: svn://kolibrios.org@1178 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
hidnplayr 2009-09-25 21:09:41 +00:00
parent 740caf3d0d
commit 68b0c1de2a
2 changed files with 101 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

120
kernel/branches/net/drivers/RTL8029.asm
View File

@ -1,16 +1,20 @@
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2008. All rights reserved. ;;
;; Copyright (C) KolibriOS team 2004-2009. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; ne2000 driver for KolibriOS ;;
;; RTL8029/ne2000 driver for KolibriOS ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; with help from CleverMouse ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;; current status (september 2009) - INCOMPLETE ;;
;; current status (september 2009) - UNSTABLE ;;
;; ;;
;; based on RTL8029.asm driver for menuetos ;;
;; and realtek8029.asm for SolarOS by Eugen Brasoveanu ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
@ -298,7 +302,7 @@ proc service_proc ;stdcall, ioctl:dword
mov edx, PCI_BASE_ADDRESS_0 ; find the base io address
.sb_reg_check:
;
movzx eax, byte [ebx+device.pci_bus] ;
movzx ecx, byte [ebx+device.pci_dev] ;
;
@ -415,6 +419,7 @@ create_new_struct:
mov dword [ebx+device.get_MAC], read_mac
mov dword [ebx+device.set_MAC], write_mac
mov dword [ebx+device.unload], unload
mov dword [ebx+device.name], my_service
ret
@ -585,18 +590,16 @@ ep_check_have_vendor:
mov eax, [ebp + device.bmem]
mov [ebp + device.rmem], eax
;-- hack
;-- hack (read mac from eeprom ant write it to hardware's register)
mov ebx, ebp
call read_mac
push .hack
sub esp, 6
mov edi, esp
lea esi, [ebp + device.mac]
movsd
movsw
jmp write_mac
.hack:
;--- hack
@ -613,8 +616,7 @@ ep_check_have_vendor:
reset:
mov ebp, ebx ;---
DEBUGF 2,"Resetting rtl8029\n"
DEBUGF 2,"Resetting device\n"
; attach int handler
movzx eax, [ebp+device.irq_line]
@ -734,6 +736,12 @@ nsr_002:
mov al, 0 ; no loopback
out dx, al
; clear packet/byte counters
lea edi, [ebp+device.bytes_tx]
mov ecx, 6
rep stosd
; Indicate that we have successfully reset the card
DEBUGF 2,"Done!\n"
@ -792,6 +800,12 @@ transmit:
out dx, al
DEBUGF 2," - Packet Sent!\n"
inc [ebp+device.packets_tx] ;
mov eax, [esp+4] ; Get packet size in eax
add dword [ebp + device.bytes_tx], eax
adc dword [ebp + device.bytes_tx + 4], 0
.finish:
mov ebx, ebp
@ -818,13 +832,13 @@ int_handler:
.nextdevice:
mov ebp, dword [esi]
set_io 0 ; We chould check ISR instead..
set_io 0
set_io P0_ISR
in al, dx
DEBUGF 2,"isr %x ",eax:2
test al, ISR_PRX
test al, ISR_PRX ; packet received ok ?
jnz .rx
add esi, 4
@ -832,11 +846,18 @@ int_handler:
loop .nextdevice
ret
; looks like we've found it!
; looks like we've found a device wich received a packet..
.rx:
stdcall KernelAlloc, ETH_FRAME_LEN ; size doesnt really matter as packet size is smaller then kernel's page size
test eax, eax
jz .fail_2
;--------------------------------------
; allocate memory for temp variables in stack
sub esp, 14+8 ; allocate memory for temp variables in stack
sub esp, 14+8
eth_type equ esp
pkthdr equ esp + 2
@ -844,10 +865,13 @@ int_handler:
eth_rx_data_ptr equ esp + 8
eth_tmp_len equ esp + 12
; These will be used by eth_receiver when the packet gets there
pointer equ esp + 14
size equ esp + 18
stdcall KernelAlloc, ETH_FRAME_LEN
;-------------------------------------
mov [pointer], eax
mov [eth_rx_data_ptr], eax
@ -910,45 +934,53 @@ int_handler:
add word[pktoff] , 4
xor eax, eax
mov ax, [pkthdr + 2]
sub ax, 4
mov ax , [pkthdr + 2]
sub ax , 4
DEBUGF 2,"Received %u bytes\n",eax
add dword [ebp + device.bytes_rx], eax ; Update stats
adc dword [ebp + device.bytes_rx + 4], 0
inc dword [ebp + device.packets_rx] ;
mov [eth_tmp_len], ax
mov dword[size], eax
cmp ax, ETH_ZLEN
jb .fail
cmp ax, ETH_FRAME_LEN
cmp ax , ETH_FRAME_LEN
ja .fail
mov al, [pkthdr]
test al, RSTAT_PRX
mov al , [pkthdr]
test al , RSTAT_PRX
jz .fail
; Right, we can now get the data
mov bh, [ebp + device.memsize]
sub bx, [pktoff]
xor ebx, ebx
mov bh , [ebp + device.memsize]
sub bx , [pktoff]
cmp [eth_tmp_len], bx
jbe .nsp_005
mov al, [ebp + device.flags]
test al, FLAG_PIO
DEBUGF 2,"tadaa!\n"
mov al , [ebp + device.flags]
test al , FLAG_PIO
jz .nsp_006
push bx
mov cx, bx
mov bx, [pktoff]
mov edi, [eth_rx_data_ptr]
push ebx
mov cx , bx
mov bx , [pktoff+4]
mov edi, [eth_rx_data_ptr+4]
call eth_pio_read
pop bx
pop ebx
jmp .nsp_007
.nsp_006:
DEBUGF 2,"PIO mode not supported by HW!\n"
; Not implemented, as we are using PIO mode on this card
.nsp_007:
@ -975,6 +1007,7 @@ int_handler:
jmp .nsp_009
.nsp_008:
DEBUGF 2,"PIO mode not supported by HW!\n"
; Not implemented, as we are using PIO mode on this card
.nsp_009:
@ -990,13 +1023,15 @@ int_handler:
dec al
out dx, al
mov ebx, ebp
add esp, 14
mov ebx, ebp
jmp EthReceiver ;;;
jmp EthReceiver ; send it to the kernel
.fail:
add esp, 14+8
.fail_2:
DEBUGF 2,"done\n"
ret
@ -1011,7 +1046,7 @@ ret
;;;;;;;;;;;;;;;;;;;;;;;
align 4
write_mac: ; in: mac on stack
write_mac: ; in: mac on stack (6 bytes)
mov ebp, ebx ;---
@ -1062,9 +1097,6 @@ read_mac:
; inc dx
; loopw .loop
;
; lea edi, [ebp + device.mac]
; DEBUGF 1,"%x-%x-%x-%x-%x-%x\n",[edi+0]:2,[edi+1]:2,[edi+2]:2,[edi+3]:2,[edi+4]:2,[edi+5]:2
;
; set_io 0
; mov al, CMD_PS0; + CMD_RD2 + CMD_STA ; set page back to 0
; out dx, al
@ -1087,6 +1119,7 @@ read_mac:
.8bit:
loop .loop
DEBUGF 1,"%x-%x-%x-%x-%x-%x\n",[edi-6]:2,[edi-5]:2,[edi-4]:2,[edi-3]:2,[edi-2]:2,[edi-1]:2
mov ebx, ebp ;---
@ -1261,24 +1294,21 @@ align 4
ne2000_DEV dd 0
version dd (5 shl 16) or (API_VERSION and 0xFFFF)
my_service db 'ne2000',0 ;max 16 chars include zero
devicename db 'Realtek 8029',0
db 'Realtek 8019',0
db 'Realtek 8019AS',0
db 'ne2000',0
db 'DP8390',0
my_service db 'RTL8029/ne2000',0 ;max 16 chars include zero
device_1 db 'Realtek 8029',0
device_2 db 'Realtek 8019',0
device_3 db 'Realtek 8019AS',0
device_4 db 'ne2000',0
device_5 db 'DP8390',0
test_data db 'NE*000 memory',0
;test_buffer db ' ',0
include_debug_strings
section '.data' data readable writable align 16
section '.data' data readable writable align 16 ;place all uninitialized data place here
;place all uninitialized data place here
ne2000_LIST:
rd MAX_ne2000
ne2000_LIST rd MAX_ne2000

28
kernel/branches/net/drivers/RTL8139.asm
View File

@ -362,7 +362,7 @@ proc service_proc stdcall, ioctl:dword
mov dword [ebx+device.get_MAC], read_mac
mov dword [ebx+device.set_MAC], write_mac
mov dword [ebx+device.unload], unload
mov dword [ebx+device.name], devicename
mov dword [ebx+device.name], my_service
; save the pci bus and device numbers
@ -555,6 +555,13 @@ probe:
.chip_ver_found:
mov [ebx+device.hw_ver_id], cl
shl ecx, 2
add ecx, name_crosslist
mov ecx, [ecx]
mov dword [ebx+device.name], ecx
DEBUGF 1,"Chip version: %s\n",ecx
; wake up the chip
mov edx, [ebx+device.io_addr]
@ -1290,7 +1297,24 @@ align 4 ; Place all initialised data here
RTL8139_DEV dd 0
version dd (5 shl 16) or (API_VERSION and 0xFFFF)
my_service db 'RTL8139',0 ; max 16 chars include zero
devicename db 'Realtek 8139',0
device_1 db 'Realtek 8139',0
device_2 db 'Realtek 8139A',0
device_3 db 'Realtek 8139B',0
device_4 db 'Realtek 8139C',0
device_5 db 'Realtek 8100',0
device_6 db 'Realtek 8139D',0
device_7 db 'Realtek 8139CP',0
device_8 db 'Realtek 8101',0
name_crosslist dd device_1
dd device_2
dd device_3
dd device_4
dd device_5
dd device_6
dd device_7
dd device_8
hw_ver_array db VER_RTL8139 ; This array is used by the probe routine to find out wich version of the RTL8139 we are working with
db VER_RTL8139A