diff --git a/kernel/branches/net/drivers/bus/pci.inc b/kernel/branches/net/drivers/bus/pci.inc new file mode 100644 index 0000000000..26a497e4fa --- /dev/null +++ b/kernel/branches/net/drivers/bus/pci.inc @@ -0,0 +1,124 @@ +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; ;; +;; Copyright (C) KolibriOS team 2004-2012. All rights reserved. ;; +;; Distributed under terms of the GNU General Public License ;; +;; ;; +;; GNU GENERAL PUBLIC LICENSE ;; +;; Version 2, June 1991 ;; +;; ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + + +; PCI Bus defines + + PCI_HEADER_TYPE = 0x0e ; 8 bit + PCI_BASE_ADDRESS_0 = 0x10 ; 32 bit + PCI_BASE_ADDRESS_5 = 0x24 ; 32 bits + PCI_BASE_ADDRESS_SPACE_IO = 0x01 + PCI_VENDOR_ID = 0x00 ; 16 bit + PCI_BASE_ADDRESS_IO_MASK = 0xFFFFFFFC + +; PCI programming + + PCI_REG_COMMAND = 0x4 ; command register + PCI_REG_STATUS = 0x6 ; status register + PCI_REG_LATENCY = 0xd ; latency timer register + PCI_REG_CAP_PTR = 0x34 ; capabilities pointer + PCI_REG_CAPABILITY_ID = 0x0 ; capapility ID in pm register block + PCI_REG_PM_STATUS = 0x4 ; power management status register + PCI_REG_PM_CTRL = 0x4 ; power management control register + PCI_BIT_PIO = 1 ; bit0: io space control + PCI_BIT_MMIO = 2 ; bit1: memory space control + PCI_BIT_MASTER = 4 ; bit2: device acts as a PCI master + + +macro find_io bus, dev, io { + + local .check, .inc, .got + + xor eax, eax + mov esi, PCI_BASE_ADDRESS_0 + movzx ecx, bus + movzx edx, dev + .check: + stdcall PciRead32, ecx ,edx ,esi + + test eax, PCI_BASE_ADDRESS_IO_MASK + jz .inc + + test eax, PCI_BASE_ADDRESS_SPACE_IO + jz .inc + + and eax, PCI_BASE_ADDRESS_IO_MASK + mov io , eax + jmp .got + + .inc: + add esi, 4 + cmp esi, PCI_BASE_ADDRESS_5 + jle .check + + .got: + +} + + +macro find_mmio32 bus, dev, mmio32 { + + local .check, .got + + xor eax, eax + mov esi, PCI_BASE_ADDRESS_0 + movzx ecx, bus + movzx edx, dev + .check: + stdcall PciRead32, ecx ,edx ,esi + + test eax, not PCI_BASE_ADDRESS_IO_MASK + jz .got + + add esi, 4 + cmp esi, PCI_BASE_ADDRESS_5 + jle .check + + xor eax, eax + .got: + mov mmio32, eax + +} + +macro find_irq bus, dev, irq { + + push eax edx ecx + movzx ecx, bus + movzx edx, dev + stdcall PciRead8, ecx ,edx ,0x3c ; 0x3c is the offset where irq can be found + mov irq, al + pop ecx edx eax + +} + +macro find_rev bus, dev, rev { + + push eax edx ecx + movzx ecx, bus + movzx edx, dev + stdcall PciRead8, ecx ,edx ,0x8 + mov rev, al + pop ecx edx eax + +} + +macro make_bus_master bus, dev { + + movzx ecx, bus + movzx edx, dev + stdcall PciRead32, ecx ,edx, PCI_REG_COMMAND + + or al, PCI_BIT_MASTER ;or PCI_BIT_PIO +; and al, not PCI_BIT_MMIO + stdcall PciWrite32, ecx, edx, PCI_REG_COMMAND, eax + +;; TODO: try to switch to PIO, and check if PIO works or not.. + +} \ No newline at end of file diff --git a/kernel/branches/net/drivers/netdrv.inc b/kernel/branches/net/drivers/netdrv.inc index b32dbd28a5..1793cb425b 100644 --- a/kernel/branches/net/drivers/netdrv.inc +++ b/kernel/branches/net/drivers/netdrv.inc @@ -1,157 +1,80 @@ -; PCI Bus defines - PCI_HEADER_TYPE equ 0x0e ;8 bit - PCI_BASE_ADDRESS_0 equ 0x10 ;32 bit - PCI_BASE_ADDRESS_5 equ 0x24 ;32 bits - PCI_BASE_ADDRESS_SPACE_IO equ 0x01 - PCI_VENDOR_ID equ 0x00 ;16 bit - PCI_BASE_ADDRESS_IO_MASK equ 0xFFFFFFFC - - -; PCI programming - PCI_REG_COMMAND equ 0x4 ; command register - PCI_REG_STATUS equ 0x6 ; status register - PCI_REG_LATENCY equ 0xd ; latency timer register - PCI_REG_CAP_PTR equ 0x34 ; capabilities pointer - PCI_REG_CAPABILITY_ID equ 0x0 ; capapility ID in pm register block - PCI_REG_PM_STATUS equ 0x4 ; power management status register - PCI_REG_PM_CTRL equ 0x4 ; power management control register - PCI_BIT_PIO equ 1 ; bit0: io space control - PCI_BIT_MMIO equ 2 ; bit1: memory space control - PCI_BIT_MASTER equ 4 ; bit2: device acts as a PCI master +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; ;; +;; Copyright (C) KolibriOS team 2004-2012. All rights reserved. ;; +;; Distributed under terms of the GNU General Public License ;; +;; ;; +;; GNU GENERAL PUBLIC LICENSE ;; +;; Version 2, June 1991 ;; +;; ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +include 'bus/pci.inc' ; Kernel variables - PAGESIZE equ 4096 - PG_SW equ 0x003 + PAGESIZE equ 4096 + PG_SW equ 0x003 ; network driver types - NET_TYPE_ETH equ 1 - NET_TYPE_SLIP equ 2 + NET_TYPE_ETH equ 1 + NET_TYPE_SLIP equ 2 - - LAST_IO = 0 + LAST_IO = 0 macro set_io addr { - if addr = 0 - mov edx, [device.io_addr] - else if addr = LAST_IO - else - add edx, addr - LAST_IO - end if + if addr = 0 + mov edx, [device.io_addr] + else if addr = LAST_IO + else + add edx, addr - LAST_IO + end if - LAST_IO = addr + LAST_IO = addr } macro allocate_and_clear dest, size, err { ; We need to allocate at least 8 pages, if we want a continuous memory in ram - push edx + push edx if (size < 8*4096) & (size > 4096) - stdcall KernelAlloc, 8*4096 + stdcall KernelAlloc, 8*4096 else - stdcall KernelAlloc, size + stdcall KernelAlloc, size end if - pop edx + pop edx - test eax, eax - jz err - mov dest, eax ; Save the address to it into the device struct - mov edi, eax ; look at last part of code! + test eax, eax + jz err + mov dest, eax ; Save the address to it into the device struct + mov edi, eax ; look at last part of code! ; Release the unused pages (if any) if (size < 8*4096) & (size > 4096) - add eax, (size/4096+1)*4096 - mov ecx, 8-(size/4096+1) - push edx - call ReleasePages - pop edx + add eax, (size/4096+1)*4096 + mov ecx, 8-(size/4096+1) + push edx + call ReleasePages + pop edx end if ; Clear the allocated buffer - mov ecx, size/4 ; divide by 4 because of DWORD - xor eax, eax - rep stosd - -} - -macro find_io bus, dev, io { - - local .check, .inc, .got - - xor eax, eax - mov esi, PCI_BASE_ADDRESS_0 - movzx ecx, bus - movzx edx, dev - .check: - stdcall PciRead32, ecx ,edx ,esi - - test eax, PCI_BASE_ADDRESS_IO_MASK - jz .inc - - test eax, PCI_BASE_ADDRESS_SPACE_IO - jz .inc - - and eax, PCI_BASE_ADDRESS_IO_MASK - mov io , eax - jmp .got - - .inc: - add esi, 4 - cmp esi, PCI_BASE_ADDRESS_5 - jle .check - - .got: - -} - -macro find_irq bus, dev, irq { - - push eax edx ecx - movzx ecx, bus - movzx edx, dev - stdcall PciRead8, ecx ,edx ,0x3c ; 0x3c is the offset where irq can be found - mov irq, al - pop ecx edx eax - -} - -macro find_rev bus, dev, rev { - - push eax edx ecx - movzx ecx, bus - movzx edx, dev - stdcall PciRead8, ecx ,edx ,0x8 - mov rev, al - pop ecx edx eax - -} - -macro make_bus_master bus, dev { - - movzx ecx, bus - movzx edx, dev - stdcall PciRead32, ecx ,edx, PCI_REG_COMMAND - - or al, PCI_BIT_MASTER ;or PCI_BIT_PIO -; and al, not PCI_BIT_MMIO - stdcall PciWrite32, ecx, edx, PCI_REG_COMMAND, eax - -;; TODO: try to switch to PIO, and check if PIO works or not.. + mov ecx, size/4 ; divide by 4 because of DWORD + xor eax, eax + rep stosd } struc IOCTL { - .handle dd ? - .io_code dd ? - .input dd ? - .inp_size dd ? - .output dd ? - .out_size dd ? + .handle dd ? + .io_code dd ? + .input dd ? + .inp_size dd ? + .output dd ? + .out_size dd ? } virtual at edx @@ -162,65 +85,65 @@ end virtual if used null_op align 4 null_op: - or eax, -1 - ret + or eax, -1 + ret end if -macro GetRealAddr { ; input and output is eax +macro GetRealAddr { ; input and output is eax - push ax - call GetPgAddr - and word[esp], PAGESIZE - 1 - or ax, word[esp] - inc esp - inc esp + push ax + call GetPgAddr + and word[esp], PAGESIZE - 1 + or ax, word[esp] + inc esp + inc esp } macro NET_DEVICE { - .type dd ? ; Type field - .mtu dd ? ; Maximal Transmission Unit - .name dd ? ; Ptr to 0 terminated string + .type dd ? ; Type field + .mtu dd ? ; Maximal Transmission Unit + .name dd ? ; Ptr to 0 terminated string - .unload dd ? ; Ptrs to driver functions - .reset dd ? ; - .transmit dd ? ; + .unload dd ? ; Ptrs to driver functions + .reset dd ? ; + .transmit dd ? ; - .bytes_tx dq ? ; Statistics, updated by the driver - .bytes_rx dq ? ; - .packets_tx dd ? ; - .packets_rx dd ? ; + .bytes_tx dq ? ; Statistics, updated by the driver + .bytes_rx dq ? ; + .packets_tx dd ? ; + .packets_rx dd ? ; - .end: + .end: } macro ETH_DEVICE { NET_DEVICE - .set_mode dd ? - .get_mode dd ? + .set_mode dd ? + .get_mode dd ? - .set_MAC dd ? - .get_MAC dd ? + .set_MAC dd ? + .get_MAC dd ? - .mode dd ? - .mac dp ? - dp ? ; qword alignment + .mode dd ? + .mac dp ? + dp ? ; qword alignment } macro SLIP_DEVICE { - NET_DEVICE + NET_DEVICE - .set_mode dd ? - .get_mode dd ? + .set_mode dd ? + .get_mode dd ? - .mode dd ? + .mode dd ? } \ No newline at end of file