;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Copyright (C) KolibriOS team 2004-2010. All rights reserved. ;; ;; Distributed under terms of the GNU General Public License ;; ;; ;; ;; DEC 21x4x driver for KolibriOS ;; ;; ;; ;; Based on dec21140.Asm from Solar OS by ;; ;; Eugen Brasoveanu, ;; ;; Ontanu Bogdan Valentin ;; ;; ;; ;; Written by hidnplayr@kolibrios.org ;; ;; ;; ;; GNU GENERAL PUBLIC LICENSE ;; ;; Version 2, June 1991 ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; format MS COFF API_VERSION equ 0x01000100 DRIVER_VERSION equ 5 MAX_DEVICES equ 16 DEBUG equ 1 __DEBUG__ equ 1 __DEBUG_LEVEL__ equ 1 include 'proc32.inc' include 'imports.inc' include 'fdo.inc' include 'netdrv.inc' public START public service_proc public version virtual at ebx device: ETH_DEVICE .rx_p_des dd ? ; descriptors ring with received packets .tx_p_des dd ? ; descriptors ring with 'to transmit' packets .tx_free_des dd ? ; Tx descriptors available .tx_wr_des dd ? ; Tx current descriptor to write data to .tx_rd_des dd ? ; Tx current descriptor to read TX completion .rx_crt_des dd ? ; Rx current descriptor .io_addr dd ? .pci_bus db ? .pci_dev db ? .irq_line db ? .size = $ - device end virtual ;------------------------------------------- ; configuration registers ;------------------------------------------- CFCS equ 4 ; configuration and status register CSR0 equ 0x00 ; Bus mode CSR1 equ 0x08 ; Transmit Poll Command CSR2 equ 0x10 ; Receive Poll Command CSR3 equ 0x18 ; Receive list base address CSR4 equ 0x20 ; Transmit list base address CSR5 equ 0x28 ; Status CSR6 equ 0x30 ; Operation mode CSR7 equ 0x38 ; Interrupt enable CSR8 equ 0x40 ; Missed frames and overflow counter CSR9 equ 0x48 ; Boot ROM, serial ROM, and MII management CSR10 equ 0x50 ; Boot ROM programming address CSR11 equ 0x58 ; General-purpose timer CSR12 equ 0x60 ; General-purpose port CSR13 equ 0x68 CSR14 equ 0x70 CSR15 equ 0x78 ; Watchdog timer ;--------bits/commands of CSR0------------------- CSR0_RESET equ 1b CSR0_WIE equ 1 SHL 24 ; Write and Invalidate Enable CSR0_RLE equ 1 SHL 23 ; PCI Read Line Enable CSR0_RML equ 1 SHL 21 ; PCI Read Multiple CSR0_CACHEALIGN_NONE equ 00b SHL 14 CSR0_CACHEALIGN_32 equ 01b SHL 14 CSR0_CACHEALIGN_64 equ 10b SHL 14 CSR0_CACHEALIGN_128 equ 11b SHL 14 ; using values from linux driver.. :P CSR0_DEFAULT equ CSR0_WIE+CSR0_RLE+CSR0_RML+CSR0_CACHEALIGN_NONE ;32 ;------- CSR5 -STATUS- bits -------------------------------- CSR5_TI equ 1 SHL 0 ; Transmit interupt - frame transmition completed CSR5_TPS equ 1 SHL 1 ; Transmit process stopped CSR5_TU equ 1 SHL 2 ; Transmit Buffer unavailable CSR5_TJT equ 1 SHL 3 ; Transmit Jabber Timeout (transmitter had been excessively active) CSR5_UNF equ 1 SHL 5 ; Transmit underflow - FIFO underflow CSR5_RI equ 1 SHL 6 ; Receive Interrupt CSR5_RU equ 1 SHL 7 ; Receive Buffer unavailable CSR5_RPS equ 1 SHL 8 ; Receive Process stopped CSR5_RWT equ 1 SHL 9 ; Receive Watchdow Timeout CSR5_ETI equ 1 SHL 10 ; Early transmit Interrupt CSR5_GTE equ 1 SHL 11 ; General Purpose Timer Expired CSR5_FBE equ 1 SHL 13 ; Fatal bus error CSR5_ERI equ 1 SHL 14 ; Early receive Interrupt CSR5_AIS equ 1 SHL 15 ; Abnormal interrupt summary CSR5_NIS equ 1 SHL 16 ; normal interrupt summary CSR5_RS_SH equ 1 SHL 17 ; Receive process state -shift CSR5_RS_MASK equ 111b ; -mask CSR5_TS_SH equ 1 SHL 20 ; Transmit process state -shift CSR5_TS_MASK equ 111b ; -mask CSR5_EB_SH equ 1 SHL 23 ; Error bits -shift CSR5_EB_MASK equ 111b ; Error bits -mask ;CSR5 TS values CSR5_TS_STOPPED equ 000b CSR5_TS_RUNNING_FETCHING_DESC equ 001b CSR5_TS_RUNNING_WAITING_TX equ 010b CSR5_TS_RUNNING_READING_BUFF equ 011b CSR5_TS_RUNNING_SETUP_PCKT equ 101b CSR5_TS_SUSPENDED equ 110b CSR5_TS_RUNNING_CLOSING_DESC equ 111b ;------- CSR6 -OPERATION MODE- bits -------------------------------- CSR6_HP equ 1 SHL 0 ; Hash/Perfect Receive Filtering mode CSR6_SR equ 1 SHL 1 ; Start/Stop receive CSR6_HO equ 1 SHL 2 ; Hash only Filtering mode CSR6_PB equ 1 SHL 3 ; Pass bad frames CSR6_IF equ 1 SHL 4 ; Inverse filtering CSR6_SB equ 1 SHL 5 ; Start/Stop backoff counter CSR6_PR equ 1 SHL 6 ; Promiscuos mode -default after reset CSR6_PM equ 1 SHL 7 ; Pass all multicast CSR6_F equ 1 SHL 9 ; Full Duplex mode CSR6_OM_SH equ 1 SHL 10 ; Operating Mode -shift CSR6_OM_MASK equ 11b ; -mask CSR6_FC equ 1 SHL 12 ; Force Collision Mode CSR6_ST equ 1 SHL 13 ; Start/Stop Transmission Command CSR6_TR_SH equ 1 SHL 14 ; Threshold Control -shift CSR6_TR_MASK equ 11b ; -mask CSR6_CA equ 1 SHL 17 ; Capture Effect Enable CSR6_PS equ 1 SHL 18 ; Port select SRL / MII/SYM CSR6_HBD equ 1 SHL 19 ; Heartbeat Disable CSR6_SF equ 1 SHL 21 ; Store and Forward -transmit full packet only CSR6_TTM equ 1 SHL 22 ; Transmit Threshold Mode - CSR6_PCS equ 1 SHL 23 ; PCS active and MII/SYM port operates in symbol mode CSR6_SCR equ 1 SHL 24 ; Scrambler Mode CSR6_MBO equ 1 SHL 25 ; Must Be One CSR6_RA equ 1 SHL 30 ; Receive All CSR6_SC equ 1 SHL 31 ; Special Capture Effect Enable ;------- CSR7 -INTERRUPT ENABLE- bits -------------------------------- CSR7_TI equ 1 SHL 0 ; transmit Interrupt Enable (set with CSR7<16> & CSR5<0> ) CSR7_TS equ 1 SHL 1 ; transmit Stopped Enable (set with CSR7<15> & CSR5<1> ) CSR7_TU equ 1 SHL 2 ; transmit buffer underrun Enable (set with CSR7<16> & CSR5<2> ) CSR7_TJ equ 1 SHL 3 ; transmit jabber timeout enable (set with CSR7<15> & CSR5<3> ) CSR7_UN equ 1 SHL 5 ; underflow Interrupt enable (set with CSR7<15> & CSR5<5> ) CSR7_RI equ 1 SHL 6 ; receive Interrupt enable (set with CSR7<16> & CSR5<5> ) CSR7_RU equ 1 SHL 7 ; receive buffer unavailable enable (set with CSR7<15> & CSR5<7> ) CSR7_RS equ 1 SHL 8 ; Receive stopped enable (set with CSR7<15> & CSR5<8> ) CSR7_RW equ 1 SHL 9 ; receive watchdog timeout enable (set with CSR7<15> & CSR5<9> ) CSR7_ETE equ 1 SHL 10 ; Early transmit Interrupt enable (set with CSR7<15> & CSR5<10> ) CSR7_GPT equ 1 SHL 11 ; general purpose timer enable (set with CSR7<15> & CSR5<11> ) CSR7_FBE equ 1 SHL 13 ; Fatal bus error enable (set with CSR7<15> & CSR5<13> ) CSR7_ERE equ 1 SHL 14 ; Early receive enable (set with CSR7<16> & CSR5<14> ) CSR7_AI equ 1 SHL 15 ; Abnormal Interrupt Summary Enable (enables CSR5<0,3,7,8,9,10,13>) CSR7_NI equ 1 SHL 16 ; Normal Interrup Enable (enables CSR5<0,2,6,11,14>) CSR7_DEFAULT equ CSR7_TI+CSR7_TS+CSR7_RI+CSR7_RS+CSR7_TU+CSR7_TJ+CSR7_UN+\ CSR7_RU+CSR7_RW+CSR7_FBE+CSR7_AI+CSR7_NI ;----------- descriptor structure --------------------- struc DES { .DES0 DD ? ; bit 31 is 'own' and rest is 'status' .DES1 DD ? ; control bits + bytes-count buffer 1 + bytes-count buffer 2 .DES2 DD ? ; pointer to buffer1 .DES3 DD ? ; pointer to buffer2 or in this case to next descriptor, as we use a chained structure .realaddr dd ? .size = 64 } virtual at 0 DES DES end virtual ;common to Rx and Tx DES0_OWN equ 1 SHL 31 ; if set, the NIC controls the descriptor, otherwise driver 'owns' the descriptors ;receive RDES0_ZER equ 1 SHL 0 ; must be 0 if legal length :D RDES0_CE equ 1 SHL 1 ; CRC error, valid only on last desc (RDES0<8>=1) RDES0_DB equ 1 SHL 2 ; dribbling bit - not multiple of 8 bits, valid only on last desc (RDES0<8>=1) RDES0_RE equ 1 SHL 3 ; Report on MII error.. i dont realy know what this means :P RDES0_RW equ 1 SHL 4 ; received watchdog timer expiration - must set CSR5<9>, valid only on last desc (RDES0<8>=1) RDES0_FT equ 1 SHL 5 ; frame type: 0->IEEE802.0 (len<1500) 1-> ETHERNET frame (len>1500), valid only on last desc (RDES0<8>=1) RDES0_CS equ 1 SHL 6 ; Collision seen, valid only on last desc (RDES0<8>=1) RDES0_TL equ 1 SHL 7 ; Too long(>1518)-NOT AN ERROR, valid only on last desc (RDES0<8>=1) RDES0_LS equ 1 SHL 8 ; Last descriptor of current frame RDES0_FS equ 1 SHL 9 ; First descriptor of current frame RDES0_MF equ 1 SHL 10 ; Multicast frame, valid only on last desc (RDES0<8>=1) RDES0_RF equ 1 SHL 11 ; Runt frame, valid only on last desc (RDES0<8>=1) and id overflow RDES0_DT_SERIAL equ 00b SHL 12 ; Data type-Serial recv frame, valid only on last desc (RDES0<8>=1) RDES0_DT_INTERNAL equ 01b SHL 12 ; Data type-Internal loopback recv frame, valid only on last desc (RDES0<8>=1) RDES0_DT_EXTERNAL equ 11b SHL 12 ; Data type-External loopback recv frame, valid only on last desc (RDES0<8>=1) RDES0_DE equ 1 SHL 14 ; Descriptor error - cant own a new desc and frame doesnt fit, valid only on last desc (RDES0<8>=1) RDES0_ES equ 1 SHL 15 ; Error Summmary - bits 1+6+11+14, valid only on last desc (RDES0<8>=1) RDES0_FL_SH equ 16 ; Field length shift, valid only on last desc (RDES0<8>=1) RDES0_FL_MASK equ 11111111111111b ; Field length mask (+CRC), valid only on last desc (RDES0<8>=1) RDES0_FF equ 1 SHL 30 ; Filtering fail-frame failed address recognition test(must CSR6<30>=1), valid only on last desc (RDES0<8>=1) RDES1_RBS1_MASK equ 11111111111b ; firsd buffer size MASK RDES1_RBS2_SH equ 1 SHL 11 ; second buffer size SHIFT RDES1_RBS2_MASK equ 11111111111b ; second buffer size MASK RDES1_RCH equ 1 SHL 24 ; Second address chained - second address (buffer) is next desc address RDES1_RER equ 1 SHL 25 ; Receive End of Ring - final descriptor, NIC must return to first desc ;transmition TDES0_DE equ 1 SHL 0 ; Deffered TDES0_UF equ 1 SHL 1 ; Underflow error TDES0_LF equ 1 SHL 2 ; Link fail report (only if CSR6<23>=1) TDES0_CC_SH equ 3 ; Collision Count shift - no of collision before transmition TDES0_CC_MASK equ 1111b ; Collision Count mask TDES0_HF equ 1 SHL 7 ; Heartbeat fail TDES0_EC equ 1 SHL 8 ; Excessive Collisions - >16 collisions TDES0_LC equ 1 SHL 9 ; Late collision TDES0_NC equ 1 SHL 10 ; No carrier TDES0_LO equ 1 SHL 11 ; Loss of carrier TDES0_TO equ 1 SHL 14 ; Transmit Jabber Timeout TDES0_ES equ 1 SHL 15 ; Error summary TDES0<1+8+9+10+11+14>=1 TDES1_TBS1_MASK equ 11111111111b ; Buffer 1 size mask TDES1_TBS2_SH equ 11 ; Buffer 2 size shift TDES1_TBS2_MASK equ 11111111111b ; Buffer 2 size mask TDES1_FT0 equ 1 SHL 22 ; Filtering type 0 TDES1_DPD equ 1 SHL 23 ; Disabled padding for packets <64bytes, no padding TDES1_TCH equ 1 SHL 24 ; Second address chained - second buffer pointer is to next desc TDES1_TER equ 1 SHL 25 ; Transmit end of ring - final descriptor TDES1_AC equ 1 SHL 26 ; Add CRC disable -pretty obvious TDES1_SET equ 1 SHL 27 ; Setup packet TDES1_FT1 equ 1 SHL 28 ; Filtering type 1 TDES1_FS equ 1 SHL 29 ; First segment - buffer is first segment of frame TDES1_LS equ 1 SHL 30 ; Last segment TDES1_IC equ 1 SHL 31 ; Interupt on completion (CSR5<0>=1) valid when TDES1<30>=1 MAX_ETH_FRAME_SIZE equ 1514 RX_DES_COUNT equ 4 ; no of RX descriptors, must be power of 2 RX_BUFF_SIZE equ 2048 ; size of buffer for each descriptor, must be multiple of 4 and <= 2048 TDES1_TBS1_MASK TX_DES_COUNT equ 4 ; no of TX descriptors, must be power of 2 TX_BUFF_SIZE equ 2048 ; size of buffer for each descriptor, used for memory allocation only RX_MEM_TOTAL_SIZE equ RX_DES_COUNT*(DES.size+RX_BUFF_SIZE) TX_MEM_TOTAL_SIZE equ TX_DES_COUNT*(DES.size+TX_BUFF_SIZE) ;============================================================================= ; serial ROM operations ;============================================================================= CSR9_SR equ 1 SHL 11 ; SROM Select CSR9_RD equ 1 SHL 14 ; ROM Read Operation CSR9_SROM_DO equ 1 SHL 3 ; Data Out for SROM CSR9_SROM_DI equ 1 SHL 2 ; Data In to SROM CSR9_SROM_CK equ 1 SHL 1 ; clock for SROM CSR9_SROM_CS equ 1 SHL 0 ; chip select.. always needed ; assume dx is CSR9 macro SROM_Delay { push eax in eax, dx in eax, dx in eax, dx in eax, dx in eax, dx in eax, dx in eax, dx in eax, dx in eax, dx in eax, dx pop eax } ; assume dx is CSR9 macro MDIO_Delay { push eax in eax, dx pop eax } macro Bit_Set a_bit { in eax, dx or eax, a_bit out dx , eax } macro Bit_Clear a_bit { in eax, dx and eax, NOT (a_bit) out dx , eax } section '.flat' code readable align 16 ;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; proc START ;; ;; ;; ;; (standard driver proc) ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;; align 4 proc START stdcall, state:dword cmp [state], 1 jne .exit .entry: DEBUGF 2,"Loading dec21x4x driver\n" stdcall RegService, my_service, service_proc ret .fail: .exit: xor eax, eax ret endp ;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; proc SERVICE_PROC ;; ;; ;; ;; (standard driver proc) ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;; align 4 proc service_proc stdcall, ioctl:dword mov edx, [ioctl] mov eax, [IOCTL.io_code] ;------------------------------------------------------ cmp eax, 0 ;SRV_GETVERSION jne @F cmp [IOCTL.out_size], 4 jl .fail mov eax, [IOCTL.output] mov [eax], dword API_VERSION xor eax, eax ret ;------------------------------------------------------ @@: cmp eax, 1 ;SRV_HOOK jne .fail cmp [IOCTL.inp_size], 3 ; Data input must be at least 3 bytes jl .fail mov eax, [IOCTL.input] cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given jne .fail ; other types arent supported for this card yet ; check if the device is already listed mov esi, device_list mov ecx, [devices] test ecx, ecx jz .firstdevice ; mov eax, [IOCTL.input] ; get the pci bus and device numbers mov ax , [eax+1] ; .nextdevice: mov ebx, [esi] cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) je .find_devicenum ; Device is already loaded, let's find it's device number add esi, 4 loop .nextdevice ; This device doesnt have its own eth_device structure yet, lets create one .firstdevice: cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card jge .fail push edx stdcall KernelAlloc, dword device.size ; Allocate the buffer for eth_device structure pop edx test eax, eax jz .fail mov ebx, eax ; ebx is always used as a pointer to the structure (in driver, but also in kernel code) ; Fill in the direct call addresses into the struct mov [device.reset], reset mov [device.transmit], transmit mov [device.get_MAC], read_mac mov [device.set_MAC], write_mac mov [device.unload], unload mov [device.name], my_service ; save the pci bus and device numbers mov eax, [IOCTL.input] mov cl , [eax+1] mov [device.pci_bus], cl mov cl , [eax+2] mov [device.pci_dev], cl ; Now, it's time to find the base io addres of the PCI device find_io [device.pci_bus], [device.pci_dev], [device.io_addr] ; We've found the io address, find IRQ now find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] DEBUGF 2,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:8 allocate_and_clear [device.rx_p_des], RX_DES_COUNT*(DES.size+RX_BUFF_SIZE), .err allocate_and_clear [device.tx_p_des], TX_DES_COUNT*(DES.size+TX_BUFF_SIZE), .err ; Ok, the eth_device structure is ready, let's probe the device ; Because initialization fires IRQ, IRQ handler must be aware of this device mov eax, [devices] ; Add the device structure to our device list mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) inc [devices] ; call probe ; this function will output in eax test eax, eax jnz .err2 ; If an error occured, exit mov [device.type], NET_TYPE_ETH call NetRegDev cmp eax, -1 je .destroy ret ; If the device was already loaded, find the device number and return it in eax .find_devicenum: DEBUGF 2,"Trying to find device number of already registered device\n" mov ebx, eax call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx ; into a device number in edi mov eax, edi ; Application wants it in eax instead DEBUGF 2,"Kernel says: %u\n", eax ret ; If an error occured, remove all allocated data and exit (returning -1 in eax) .destroy: ; todo: reset device into virgin state .err2: dec [devices] .err: DEBUGF 2,"removing device structure\n" stdcall KernelFree, [device.rx_p_des] stdcall KernelFree, [device.tx_p_des] stdcall KernelFree, ebx .fail: or eax, -1 ret ;------------------------------------------------------ endp ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; ;; ;; ;; Actual Hardware dependent code starts here ;; ;; ;; ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; align 4 unload: ; TODO: (in this particular order) ; ; - Stop the device ; - Detach int handler ; - Remove device from local list (RTL8139_LIST) ; - call unregister function in kernel ; - Remove all allocated structures and buffers the card used or eax,-1 ret macro status { set_io CSR5 in eax, dx DEBUGF 1,"CSR5: %x\n", eax } ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Probe ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; align 4 probe: DEBUGF 2,"Probing dec21x4x device: " make_bus_master [device.pci_bus], [device.pci_dev] movzx eax, [device.pci_bus] movzx ecx, [device.pci_dev] stdcall PciRead32, eax ,ecx ,0 ; get device/vendor id DEBUGF 1,"Vendor id: 0x%x\n", ax cmp ax , 0x1011 jne .notfound shr eax, 16 DEBUGF 1,"Vendor ok!, device id: 0x%x\n", ax ; TODO: use another method to detect chip! cmp ax , 0x0009 je .supported_device cmp ax , 0x0019 je .supported_device2 .notfound: DEBUGF 1,"Device not supported!\n" or eax, -1 ret .supported_device2: ; wake up the 21143 movzx ecx, [device.pci_bus] movzx edx, [device.pci_dev] xor eax, eax stdcall PciWrite32, ecx, edx, 0x40, eax .supported_device: call SROM_GetWidth ; TODO: use this value returned in ecx ; in the read_word routine! ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Reset ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; align 4 reset: DEBUGF 2,"Resetting dec21x4x\n" ;----------------------------------------------------------- ; board software reset - if fails, dont do nothing else set_io 0 status set_io CSR0 mov eax, CSR0_RESET out dx , eax ; wait at least 50 PCI cycles mov esi, 1000 call Sleep ;----------- ; setup CSR0 set_io 0 status set_io CSR0 mov eax, CSR0_DEFAULT out dx , eax ; wait at least 50 PCI cycles mov esi, 1000 call Sleep ;----------------------------------- ; Read mac from eeprom to driver ram call read_mac_eeprom ;-------------------------------- ; insert irq handler on given irq movzx eax, [device.irq_line] DEBUGF 1,"Attaching int handler to irq %x\n", eax:1 stdcall AttachIntHandler, eax, int_handler, dword 0 test eax, eax jnz @f DEBUGF 1,"\nCould not attach int handler!\n" ; or eax, -1 ; ret @@: set_io 0 status ;------------------------------------------ ; Setup RX descriptors (use chained method) mov eax, [device.rx_p_des] call GetPgAddr mov edx, eax lea esi, [eax + RX_DES_COUNT*(DES.size)] ; jump over RX descriptors mov eax, [device.rx_p_des] add eax, RX_DES_COUNT*(DES.size) ; jump over RX descriptors mov edi, [device.rx_p_des] mov ecx, RX_DES_COUNT push edx ;; .loop_rx_des: add edx, DES.size mov [edi+DES.DES0], DES0_OWN ; hardware owns buffer mov [edi+DES.DES1], 1984+RDES1_RCH ; only size of first buffer, chained buffers mov [edi+DES.DES2], esi ; hw buffer address mov [edi+DES.DES3], edx ; pointer to next descriptor mov [edi+DES.realaddr], eax ; virtual buffer address DEBUGF 1,"RX desc %u, buff addr: %x, next desc: %x, real buff addr: %x, real descr addr: %x \n", ecx, esi, edx, eax, edi add esi, RX_BUFF_SIZE add eax, RX_BUFF_SIZE add edi, DES.size dec ecx jnz .loop_rx_des ; set last descriptor as LAST sub edi, DES.size or [edi+DES.DES1], RDES1_RER ; EndOfRing pop edx ;; mov [edi+DES.DES3], edx ;; ;--------------------- ; Setup TX descriptors mov eax, [device.tx_p_des] call GetPgAddr mov edx, eax lea esi, [eax + TX_DES_COUNT*(DES.size)] ; jump over TX descriptors mov eax, [device.tx_p_des] add eax, TX_DES_COUNT*(DES.size) ; jump over TX descriptors mov edi, [device.tx_p_des] mov ecx, TX_DES_COUNT push edx ;; .loop_tx_des: add edx, DES.size mov [edi+DES.DES0], 0 ; owned by driver mov [edi+DES.DES1], TDES1_TCH ; chained method mov [edi+DES.DES2], esi ; pointer to buffer mov [edi+DES.DES3], edx ; pointer to next descr mov [edi+DES.realaddr], eax DEBUGF 1,"TX desc %u, buff addr: %x, next desc: %x, real buff addr: %x, real descr addr: %x \n", ecx, esi, edx, eax, edi add esi, TX_BUFF_SIZE add eax, TX_BUFF_SIZE add edi, DES.size dec ecx jnz .loop_tx_des ; set last descriptor as LAST sub edi, DES.size or [edi+DES.DES1], TDES1_TER ; EndOfRing pop edx ;;; mov [edi+DES.DES3], edx ;;; ;------------------ ; Reset descriptors mov [device.tx_wr_des], 0 mov [device.tx_rd_des], 0 mov [device.rx_crt_des], 0 mov [device.tx_free_des], TX_DES_COUNT ;-------------------------------------------- ; setup CSR3 & CSR4 (pointers to descriptors) set_io 0 status set_io CSR3 mov eax, [device.rx_p_des] call GetPgAddr DEBUGF 1,"RX descriptor base address: %x\n", eax out dx , eax set_io CSR4 mov eax, [device.tx_p_des] call GetPgAddr DEBUGF 1,"TX descriptor base address: %x\n", eax out dx , eax ;------------------------------------------------------- ; setup interrupt mask register -expect IRQs from now on status DEBUGF 1,"Enabling interrupts\n" set_io CSR7 mov eax, CSR7_DEFAULT out dx , eax status ;---------- ; enable RX set_io 0 status DEBUGF 1,"Enable RX\n" set_io CSR6 Bit_Set CSR6_SR; or CSR6_PR or CSR6_ST DEBUGF 1,"CSR6: %x\n", eax status call start_link ; wait a bit mov esi, 3000 call Sleep ;---------------------------------------------------- ; send setup packet to notify the board about the MAC call Send_Setup_Packet xor eax, eax ; clear packet/byte counters lea edi, [device.bytes_tx] mov ecx, 6 rep stosd ; Set the mtu, kernel will be able to send now mov [device.mtu], 1514 DEBUGF 1,"Reset done\n" ret align 4 start_link: ; TODO: write working code here ret ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Send setup packet ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; align 4 Send_Setup_Packet: DEBUGF 1,"Sending setup packet\n" ; if no descriptors available, out mov ecx, 1000 @@loop_wait_desc: cmp [device.tx_free_des], 0 jne @f dec ecx jnz @@loop_wait_desc mov eax, -1 ret @@: ; go to current send descriptor mov edi, [device.tx_p_des] mov eax, [device.tx_wr_des] DEBUGF 1,"Got free descriptor: %u (%x)", eax, edi mov edx, DES.size mul edx add edi, eax DEBUGF 1,"=>%x\n", edi ; if NOT sending FIRST setup packet, must set current descriptor to 0 size for both buffers, ; and go to next descriptor for real setup packet... ;; TODO: check if 2 descriptors are available ; cmp [device.tx_packets], 0 ; je .not_first ; ; and [edi+DES.des1], 0 ; mov [edi+DES.des0], DES0_OWN ; ; go to next descriptor ; inc [device.tx_wr_des] ; and [device.tx_wr_des], TX_DES_COUNT-1 ; ; dec free descriptors count ; cmp [device.tx_free_des], 0 ; jz @f ; dec [device.tx_free_des] ; @@: ; ; ; recompute pointer to current descriptor ; mov edi, [device.tx_p_des] ; mov eax, [device.tx_wr_des] ; mov edx, DES.size ; mul edx ; add edi, eax .not_first: push edi ; copy setup packet to current descriptor mov edi, [edi+DES.realaddr] ; copy once the address lea esi, [device.mac] DEBUGF 1,"copying packet to %x from %x\n", edi, esi mov ecx, 3 ; mac is 6 bytes thus 3 words .loop: DEBUGF 1,"%x ", [esi]:4 movsw dec esi dec esi movsw dec ecx jnz .loop DEBUGF 1,"\n" ; copy 15 times the broadcast address mov ecx, 3*15 mov eax, 0xffffffff rep stosd pop edi ; setup descriptor DEBUGF 1,"setting up descriptor\n" mov [edi+DES.DES1], TDES1_IC+TDES1_SET+TDES1_TCH+192 ; size must be EXACTLY 192 bytes mov [edi+DES.DES0], DES0_OWN DEBUGF 1,"TDES0: %x\n", [edi+DES.DES0]:8 DEBUGF 1,"TDES1: %x\n", [edi+DES.DES1]:8 DEBUGF 1,"TDES2: %x\n", [edi+DES.DES2]:8 DEBUGF 1,"TDES3: %x\n", [edi+DES.DES3]:8 ; go to next descriptor inc [device.tx_wr_des] and [device.tx_wr_des], TX_DES_COUNT-1 ; dec free descriptors count cmp [device.tx_free_des], 0 jz @f dec [device.tx_free_des] @@: ; start tx set_io 0 status set_io CSR6 in eax, dx test eax, CSR6_ST ; if NOT started, start now jnz .already_started or eax, CSR6_ST DEBUGF 1,"Starting TX\n" jmp .do_it .already_started: ; if already started, issue a Transmit Poll command set_io CSR1 mov eax, 0 DEBUGF 1,"Issuing transmit poll command\n" .do_it: out dx , eax status DEBUGF 1,"Sending setup packet, completed!\n" ret ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Transmit ;; ;; ;; ;; In: buffer pointer in [esp+4] ;; ;; size of buffer in [esp+8] ;; ;; pointer to device structure in ebx ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; align 4 transmit: DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n",[esp+4],[esp+8] mov eax, [esp+4] DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ [eax+13]:2,[eax+12]:2 cmp dword [esp+8], MAX_ETH_FRAME_SIZE ja .fail cmp [device.tx_free_des], 0 je .fail ;-------------------------- ; copy packet to crt buffer mov eax, [device.tx_wr_des] mov edx, DES.size mul edx add eax, [device.tx_p_des] mov edi, [eax+DES.realaddr] ; pointer to buffer mov esi, [esp+4] mov ecx, [esp+8] DEBUGF 1,"copying %u bytes from %x to %x\n", ecx, esi, edi rep movsb ; set packet size mov ecx, [eax+DES.DES1] and ecx, TDES1_TER ; preserve 'End of Ring' bit or ecx, [esp+8] ; set size or ecx, TDES1_FS or TDES1_LS or TDES1_IC or TDES1_TCH ; first descr, last descr, interrupt on complete, chained modus mov [eax+DES.DES1], ecx ; set descriptor info mov [eax+DES.DES0], DES0_OWN ; say it is now owned by the 21x4x ; start tx set_io 0 status set_io CSR6 in eax, dx test eax, CSR6_ST ; if NOT started, start now jnz .already_started or eax, CSR6_ST DEBUGF 1,"Starting TX\n" jmp .do_it .already_started: ; if already started, issues a Transmit Poll command set_io CSR1 mov eax, -1 .do_it: out dx , eax ; Update stats inc [device.packets_tx] mov eax, [esp+8] add dword [device.bytes_tx], eax adc dword [device.bytes_tx + 4], 0 ; go to next descriptor inc [device.tx_wr_des] and [device.tx_wr_des], TX_DES_COUNT-1 ; dec free descriptors count test [device.tx_free_des], -1 jz .end dec [device.tx_free_des] .end: status DEBUGF 1,"transmit ok\n" xor eax, eax stdcall KernelFree, [esp+4] ret 8 .fail: DEBUGF 1,"transmit failed\n" or eax, -1 stdcall KernelFree, [esp+4] ret 8 ;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Interrupt handler ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;; align 4 int_handler: DEBUGF 1,"IRQ %x ",eax:2 ; no, you cant replace 'eax:2' with 'al', this must be a bug in FDO ; find pointer of device wich made IRQ occur mov ecx, [devices] test ecx, ecx jz .fail mov esi, device_list .nextdevice: mov ebx, dword [esi] set_io 0 set_io CSR5 in eax, dx out dx , eax ; send it back to ACK and eax, CSR7_DEFAULT ; int mask test eax, eax jnz .got_it .continue: add esi, 4 dec ecx jnz .nextdevice ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver) .got_it: DEBUGF 1,"CSR7: %x ", eax ; looks like we've found it! ; Lets found out why the irq occured then.. ;---------------------------------- ; TX ok? test eax, CSR5_TI jz .not_tx push ax esi ecx DEBUGF 1,"TX ok!\n" ; go to current descriptor mov edi, [device.tx_p_des] mov eax, [device.tx_rd_des] mov edx, DES.size mul edx add edi, eax .loop_tx: ; done if all desc are free cmp [device.tx_free_des], TX_DES_COUNT jz .end_tx mov eax, [edi+DES.DES0] ; we stop at first desc that is owned be NIC test eax, DES0_OWN jnz .end_tx ; detect is setup packet cmp eax, (0ffffffffh - DES0_OWN) ; all other bits are 1 jne .not_setup_packet DEBUGF 1,"Setup Packet detected\n" .not_setup_packet: DEBUGF 1,"packet status: %x\n", eax ; next descriptor add edi, DES.size inc [device.tx_rd_des] and [device.tx_rd_des], TX_DES_COUNT-1 ; inc free desc inc [device.tx_free_des] cmp [device.tx_free_des], TX_DES_COUNT jle @f mov [device.tx_free_des], TX_DES_COUNT @@: jmp .loop_tx .end_tx: ;------------------------------------------------------ ; here must be called standard Ethernet Tx Irq Handler ;------------------------------------------------------ pop ecx esi ax ;---------------------------------- ; RX irq .not_tx: test eax, CSR5_RI jz .not_rx push ax esi ecx DEBUGF 1,"RX ok!\n" ;go to current descriptor mov edi, [device.rx_p_des] mov eax, [device.rx_crt_des] mov edx, DES.size mul edx add edi, eax .loop_rx_start_of_packet: mov eax, [edi+DES.DES0] test eax, DES0_OWN jnz .end_rx ; current desc is busy, nothing to do test eax, RDES0_FS jz .end_rx ; current desc is NOT first packet, ERROR! test eax, RDES0_LS ; if not last desc of packet, error for now jz .end_rx ; .IF ZERO? ; ODS2 <"Net_Interrupt: packet > 1 descriptor, not supported yet :P"> ; jmp @@end_rx ; .ENDIF test eax, RDES0_ES jnz .end_rx ; .IF !ZERO? ; ODS2 <"Net_Interrupt: RX error"> ; jmp @@end_rx ; .ENDIF mov esi, [edi+DES.realaddr] mov ecx, [edi+DES.DES0] shr ecx, RDES0_FL_SH and ecx, RDES0_FL_MASK sub ecx, 4 ; crc DEBUGF 1,"Received packet!, size=%u, addr:%x\n", ecx, esi push esi edi ecx stdcall KernelAlloc, ecx ; Allocate a buffer to put packet into pop ecx edi esi test eax, eax jz .fail push edi push dword .continue_rx push ecx eax mov edi, eax ; update statistics inc [device.packets_rx] add dword [device.bytes_rx], ecx adc dword [device.bytes_rx + 4], 0 ; copy packet data shr cx , 1 jnc .nb movsb .nb: shr cx , 1 jnc .nw movsw .nw: rep movsd jmp EthReceiver .continue_rx: pop edi ; free descriptor mov [edi+DES.DES0], DES0_OWN ; next descriptor add edi, DES.size inc [device.rx_crt_des] and [device.rx_crt_des], RX_DES_COUNT-1 jmp .loop_rx_start_of_packet .end_rx: .fail: pop ecx esi ax .not_rx: jmp .continue align 4 write_mac: ; in: mac pushed onto stack (as 3 words) DEBUGF 2,"Writing MAC: " ; write data into driver cache mov esi, esp lea edi, [device.mac] movsd movsw add esp, 6 ; send setup packet (only if driver is started) call Send_Setup_Packet align 4 read_mac: DEBUGF 1,"Read_mac\n" ret align 4 read_mac_eeprom: DEBUGF 1,"Read_mac_eeprom\n" lea edi, [device.mac] mov esi, 20/2 ; read words, start address is 20 .loop: push esi edi call SROM_Read_Word pop edi esi stosw inc esi cmp esi, 26/2 jl .loop DEBUGF 2,"%x-%x-%x-%x-%x-%x\n",[edi-6]:2,[edi-5]:2,[edi-4]:2,[edi-3]:2,[edi-2]:2,[edi-1]:2 ret align 4 write_mac_eeprom: DEBUGF 1,"Write_mac_eeprom\n" ret align 4 SROM_GetWidth: ; should be 6 or 8 according to some manuals (returns in ecx) DEBUGF 1,"SROM_GetWidth\n" call SROM_Idle call SROM_EnterAccessMode ; set_io 0 ; set_io CSR9 ; send 110b in eax, dx or eax, CSR9_SROM_DI call SROM_out in eax, dx or eax, CSR9_SROM_DI call SROM_out in eax, dx and eax, not (CSR9_SROM_DI) call SROM_out mov ecx,1 .loop2: Bit_Set CSR9_SROM_CK SROM_Delay in eax, dx and eax, CSR9_SROM_DO jnz .not_zero Bit_Clear CSR9_SROM_CK SROM_Delay jmp .end_loop2 .not_zero: Bit_Clear CSR9_SROM_CK SROM_Delay inc ecx cmp ecx, 12 jle .loop2 .end_loop2: DEBUGF 1,"Srom width=%u\n", ecx call SROM_Idle call SROM_EnterAccessMode call SROM_Idle ret align 4 SROM_out: out dx, eax SROM_Delay Bit_Set CSR9_SROM_CK SROM_Delay Bit_Clear CSR9_SROM_CK SROM_Delay ret align 4 SROM_EnterAccessMode: DEBUGF 1,"SROM_EnterAccessMode\n" set_io 0 set_io CSR9 mov eax, CSR9_SR out dx, eax SROM_Delay Bit_Set CSR9_RD SROM_Delay Bit_Clear CSR9_SROM_CK SROM_Delay Bit_Set CSR9_SROM_CS SROM_Delay ret align 4 SROM_Idle: DEBUGF 1,"SROM_Idle\n" call SROM_EnterAccessMode ; set_io 0 ; set_io CSR9 mov ecx, 25 .loop_clk: Bit_Clear CSR9_SROM_CK SROM_Delay Bit_Set CSR9_SROM_CK SROM_Delay dec ecx jnz .loop_clk Bit_Clear CSR9_SROM_CK SROM_Delay Bit_Clear CSR9_SROM_CS SROM_Delay xor eax, eax out dx, eax ret ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Read serial EEprom word ;; ;; ;; ;; In: esi = read address ;; ;; OUT: ax = data word ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; align 4 SROM_Read_Word: DEBUGF 1,"SROM_Read_word at: %x result: ", esi set_io 0 set_io CSR9 ; enter access mode mov eax, CSR9_SR + CSR9_RD out dx , eax or eax, CSR9_SROM_CS out dx , eax ; TODO: change this hard-coded 6-bit stuff to use value from srom_getwidth ; send read command "110b" + address to read from and esi, 111111b or esi, 110b shl 6 mov ecx, 1 shl 9 .loop_cmd: mov eax, CSR9_SR + CSR9_RD + CSR9_SROM_CS test esi, ecx jz @f or eax, CSR9_SROM_DI @@: out dx , eax SROM_Delay or eax, CSR9_SROM_CK out dx , eax SROM_Delay shr ecx, 1 jnz .loop_cmd ; read data from SROM xor esi, esi mov ecx, 17 ;;; TODO: figure out why 17, not 16 .loop_read: mov eax, CSR9_SR + CSR9_RD + CSR9_SROM_CS + CSR9_SROM_CK out dx , eax SROM_Delay in eax, dx and eax, CSR9_SROM_DO shr eax, 3 shl esi, 1 or esi, eax mov eax, CSR9_SR + CSR9_RD + CSR9_SROM_CS out dx , eax SROM_Delay dec ecx jnz .loop_read mov eax, esi DEBUGF 1,"%x\n", ax ret ;<<<<<<<<<<<<<<<<<<<<<<<<<<<< ;********************************************************************* ;* Media Descriptor Code * ;********************************************************************* ; MII transceiver control section. ; Read and write the MII registers using software-generated serial ; MDIO protocol. See the MII specifications or DP83840A data sheet ; for details. ; The maximum data clock rate is 2.5 Mhz. The minimum timing is usually ; met by back-to-back PCI I/O cycles, but we insert a delay to avoid ; "overclocking" issues or future 66Mhz PCI. ; Read and write the MII registers using software-generated serial ; MDIO protocol. It is just different enough from the EEPROM protocol ; to not share code. The maxium data clock rate is 2.5 Mhz. MDIO_SHIFT_CLK equ 0x10000 MDIO_DATA_WRITE0 equ 0x00000 MDIO_DATA_WRITE1 equ 0x20000 MDIO_ENB equ 0x00000 ; Ignore the 0x02000 databook setting. MDIO_ENB_IN equ 0x40000 MDIO_DATA_READ equ 0x80000 ; MII transceiver control section. ; Read and write the MII registers using software-generated serial ; MDIO protocol. See the MII specifications or DP83840A data sheet ; for details. align 4 mdio_read: ; phy_id:edx, location:esi DEBUGF 1,"mdio read, phy=%x, location=%x", edx, esi shl edx, 5 or esi, edx or esi, 0xf6 shl 10 set_io 0 set_io CSR9 ; if (tp->chip_id == LC82C168) { ; int i = 1000; ; outl(0x60020000 + (phy_id<<23) + (location<<18), ioaddr + 0xA0); ; inl(ioaddr + 0xA0); ; inl(ioaddr + 0xA0); ; while (--i > 0) ; if ( ! ((retval = inl(ioaddr + 0xA0)) & 0x80000000)) ; return retval & 0xffff; ; return 0xffff; ; } ; ; if (tp->chip_id == COMET) { ; if (phy_id == 1) { ; if (location < 7) ; return inl(ioaddr + 0xB4 + (location<<2)); ; else if (location == 17) ; return inl(ioaddr + 0xD0); ; else if (location >= 29 && location <= 31) ; return inl(ioaddr + 0xD4 + ((location-29)<<2)); ; } ; return 0xffff; ; } ; Establish sync by sending at least 32 logic ones. mov ecx, 32 .loop: mov eax, MDIO_ENB or MDIO_DATA_WRITE1 out dx, eax MDIO_Delay or eax, MDIO_SHIFT_CLK out dx, eax MDIO_Delay dec ecx jnz .loop ; Shift the read command bits out. mov ecx, 1 shl 15 .loop2: mov eax, MDIO_ENB test esi, ecx jz @f or eax, MDIO_DATA_WRITE1 @@: out dx, eax MDIO_Delay or eax, MDIO_SHIFT_CLK out dx, eax MDIO_Delay shr ecx, 1 jnz .loop2 ; Read the two transition, 16 data, and wire-idle bits. xor esi, esi mov ecx, 19 .loop3: mov eax, MDIO_ENB_IN out dx, eax MDIO_Delay shl esi, 1 in eax, dx test eax, MDIO_DATA_READ jz @f inc esi @@: mov eax, MDIO_ENB_IN or MDIO_SHIFT_CLK out dx, eax MDIO_Delay dec ecx jnz .loop3 shr esi, 1 movzx eax, si DEBUGF 1,", data=%x\n", ax ret align 4 mdio_write: ;int phy_id: edx, int location: edi, int value: ax) DEBUGF 1,"mdio write, phy=%x, location=%x, data=%x\n", edx, edi, ax shl edi, 18 or edi, 0x5002 shl 16 shl edx, 23 or edi, edx mov di, ax set_io 0 set_io CSR9 ; if (tp->chip_id == LC82C168) { ; int i = 1000; ; outl(cmd, ioaddr + 0xA0); ; do ; if ( ! (inl(ioaddr + 0xA0) & 0x80000000)) ; break; ; while (--i > 0); ; return; ; } ; if (tp->chip_id == COMET) { ; if (phy_id != 1) ; return; ; if (location < 7) ; outl(value, ioaddr + 0xB4 + (location<<2)); ; else if (location == 17) ; outl(value, ioaddr + 0xD0); ; else if (location >= 29 && location <= 31) ; outl(value, ioaddr + 0xD4 + ((location-29)<<2)); ; return; ; } ; Establish sync by sending at least 32 logic ones. mov ecx, 32 .loop: mov eax, MDIO_ENB or MDIO_DATA_WRITE1 out dx, eax MDIO_Delay or eax, MDIO_SHIFT_CLK out dx, eax MDIO_Delay dec ecx jnz .loop ; Shift the command bits out. mov ecx, 1 shl 31 .loop2: mov eax, MDIO_ENB test edi, ecx jz @f or eax, MDIO_DATA_WRITE1 @@: out dx, eax MDIO_Delay or eax, MDIO_SHIFT_CLK out dx, eax MDIO_Delay shr ecx, 1 jnz .loop2 ; Clear out extra bits. mov ecx, 2 .loop3: mov eax, MDIO_ENB out dx, eax MDIO_Delay or eax, MDIO_SHIFT_CLK out dx, eax MDIO_Delay dec ecx jnz .loop3 ret ; End of code align 4 ; Place all initialised data here devices dd 0 version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF) my_service db 'DEC21X4X',0 ; max 16 chars include zero include_debug_strings ; All data wich FDO uses will be included here section '.data' data readable writable align 16 ; place all uninitialized data place here device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling