forked from KolibriOS/kolibrios
739 lines
18 KiB
PHP
739 lines
18 KiB
PHP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
;; ;;
|
|
;; I8255X.INC ;;
|
|
;; ;;
|
|
;; Ethernet driver for Menuet OS ;;
|
|
;; ;;
|
|
;; Version 0.3 11 August 2003 ;;
|
|
;; ;;
|
|
;; This driver is based on the eepro100 driver from ;;
|
|
;; the etherboot 5.0.6 project. The copyright statement is ;;
|
|
;; ;;
|
|
;; GNU GENERAL PUBLIC LICENSE ;;
|
|
;; Version 2, June 1991 ;;
|
|
;; ;;
|
|
;; remaining parts Copyright 2002 Mike Hibbett, ;;
|
|
;; mikeh@oceanfree.net ;;
|
|
;; ;;
|
|
;; See file COPYING for details ;;
|
|
;; ;;
|
|
;; ;;
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
|
|
|
;********************************************************************
|
|
; Interface
|
|
; I8255x_reset
|
|
; I8255x_probe
|
|
; I8255x_poll
|
|
; I8255x_transmit
|
|
;
|
|
; These functions are referenced in ethernet.inc
|
|
;
|
|
;********************************************************************
|
|
|
|
|
|
rxfd_status equ eth_data_start
|
|
rxfd_command equ eth_data_start + 2
|
|
rxfd_link equ eth_data_start + 4
|
|
rxfd_rx_buf_addr equ eth_data_start + 8
|
|
rxfd_count equ eth_data_start + 12
|
|
rxfd_size equ eth_data_start + 14
|
|
rxfd_packet equ eth_data_start + 16
|
|
|
|
|
|
|
|
uglobal
|
|
eeprom_data: times 16 dd 0
|
|
|
|
align 4
|
|
|
|
lstats:
|
|
tx_good_frames: dd 0
|
|
tx_coll16_errs: dd 0
|
|
tx_late_colls: dd 0
|
|
tx_underruns: dd 0
|
|
tx_lost_carrier: dd 0
|
|
tx_deferred: dd 0
|
|
tx_one_colls: dd 0
|
|
tx_multi_colls: dd 0
|
|
tx_total_colls: dd 0
|
|
rx_good_frames: dd 0
|
|
rx_crc_errs: dd 0
|
|
rx_align_errs: dd 0
|
|
rx_resource_errs: dd 0
|
|
rx_overrun_errs: dd 0
|
|
rx_colls_errs: dd 0
|
|
rx_runt_errs: dd 0
|
|
done_marker: dd 0
|
|
|
|
align 4
|
|
|
|
confcmd:
|
|
confcmd_status: dw 0
|
|
confcmd_command: dw 0
|
|
confcmd_link: dd 0
|
|
endg
|
|
|
|
iglobal
|
|
confcmd_data: db 22, 0x08, 0, 0, 0, 0x80, 0x32, 0x03, 1
|
|
db 0, 0x2e, 0, 0x60, 0, 0xf2, 0x48, 0, 0x40, 0xf2
|
|
db 0x80, 0x3f, 0x05
|
|
endg
|
|
|
|
uglobal
|
|
align 4
|
|
|
|
txfd:
|
|
txfd_status: dw 0
|
|
txfd_command: dw 0
|
|
txfd_link: dd 0
|
|
txfd_tx_desc_addr: dd 0
|
|
txfd_count: dd 0
|
|
txfd_tx_buf_addr0: dd 0
|
|
txfd_tx_buf_size0: dd 0
|
|
txfd_tx_buf_addr1: dd 0
|
|
txfd_tx_buf_size1: dd 0
|
|
|
|
align 4
|
|
|
|
hdr:
|
|
hdr_dst_addr: times 6 db 0
|
|
hdr_src_addr: times 6 db 0
|
|
hdr_type: dw 0
|
|
endg
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; wait_for_cmd_done
|
|
;
|
|
; Description
|
|
; waits for the hardware to complete a command
|
|
; port address in edx
|
|
;
|
|
; al destroyed
|
|
;***************************************************************************
|
|
wait_for_cmd_done:
|
|
in al, dx
|
|
cmp al, 0
|
|
jne wait_for_cmd_done
|
|
ret
|
|
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; mdio_read
|
|
;
|
|
; Description
|
|
; This probably reads a register in the "physical media interface chip"
|
|
; Phy_id in ebx
|
|
; location in ecx
|
|
;
|
|
; Data returned in eax
|
|
;
|
|
;***************************************************************************
|
|
mdio_read:
|
|
mov edx, [io_addr]
|
|
add edx, 16 ; SCBCtrlMDI
|
|
|
|
mov eax, 0x08000000
|
|
shl ecx, 16
|
|
or eax, ecx
|
|
shl ebx, 21
|
|
or eax, ebx
|
|
|
|
out dx, eax
|
|
|
|
mrlp:
|
|
call delay_us
|
|
in eax, dx
|
|
mov ecx, eax
|
|
and ecx, 0x10000000
|
|
jz mrlp
|
|
|
|
and eax, 0xffff
|
|
ret
|
|
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; mdio_write
|
|
;
|
|
; Description
|
|
; This probably writes a register in the "physical media interface chip"
|
|
; Phy_id in ebx
|
|
; location in ecx
|
|
; data in edx
|
|
; Data returned in eax
|
|
;
|
|
;***************************************************************************
|
|
mdio_write:
|
|
mov eax, 0x04000000
|
|
shl ecx, 16
|
|
or eax, ecx
|
|
shl ebx, 21
|
|
or eax, ebx
|
|
or eax, edx
|
|
|
|
mov edx, [io_addr]
|
|
add edx, 16 ; SCBCtrlMDI
|
|
out dx, eax
|
|
|
|
mwlp:
|
|
call delay_us
|
|
in eax, dx
|
|
mov ecx, eax
|
|
and ecx, 0x10000000
|
|
jz mwlp
|
|
|
|
and eax, 0xffff
|
|
ret
|
|
|
|
|
|
|
|
;/***********************************************************************/
|
|
;/* I82557 related defines */
|
|
;/***********************************************************************/
|
|
|
|
; Serial EEPROM section.
|
|
; A "bit" grungy, but we work our way through bit-by-bit :->.
|
|
; EEPROM_Ctrl bits.
|
|
EE_SHIFT_CLK equ 0x01 ; EEPROM shift clock.
|
|
EE_CS equ 0x02 ; EEPROM chip select.
|
|
EE_DATA_WRITE equ 0x04 ; EEPROM chip data in.
|
|
EE_DATA_READ equ 0x08 ; EEPROM chip data out.
|
|
EE_WRITE_0 equ 0x4802
|
|
EE_WRITE_1 equ 0x4806
|
|
EE_ENB equ 0x4802
|
|
|
|
|
|
; The EEPROM commands include the alway-set leading bit.
|
|
EE_READ_CMD equ 6
|
|
|
|
; The SCB accepts the following controls for the Tx and Rx units:
|
|
CU_START equ 0x0010
|
|
CU_RESUME equ 0x0020
|
|
CU_STATSADDR equ 0x0040
|
|
CU_SHOWSTATS equ 0x0050 ; Dump statistics counters.
|
|
CU_CMD_BASE equ 0x0060 ; Base address to add to add CU commands.
|
|
CU_DUMPSTATS equ 0x0070 ; Dump then reset stats counters.
|
|
|
|
RX_START equ 0x0001
|
|
RX_RESUME equ 0x0002
|
|
RX_ABORT equ 0x0004
|
|
RX_ADDR_LOAD equ 0x0006
|
|
RX_RESUMENR equ 0x0007
|
|
INT_MASK equ 0x0100
|
|
DRVR_INT equ 0x0200 ; Driver generated interrupt.
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; do_eeprom_cmd
|
|
;
|
|
; Description
|
|
; writes a cmd to the ethernet cards eeprom, by bit bashing
|
|
; cmd in ebx
|
|
; cmd length in ecx
|
|
; return in eax
|
|
;***************************************************************************
|
|
do_eeprom_cmd:
|
|
mov edx, [io_addr] ; We only require the value in dx
|
|
add dx, 14 ; the value SCBeeprom
|
|
|
|
mov ax, EE_ENB
|
|
out dx, ax
|
|
call delay_us
|
|
|
|
mov ax, 0x4803 ; EE_ENB | EE_SHIFT_CLK
|
|
out dx, ax
|
|
call delay_us
|
|
|
|
; dx holds ee_addr
|
|
; ecx holds count
|
|
; eax holds cmd
|
|
xor edi, edi ; this will be the receive data
|
|
|
|
dec_001:
|
|
mov esi, 1
|
|
|
|
dec ecx
|
|
shl esi, cl
|
|
inc ecx
|
|
and esi, ebx
|
|
mov eax, EE_WRITE_0 ; I am assuming this doesnt affect the flags..
|
|
cmp esi,0
|
|
jz dec_002
|
|
mov eax, EE_WRITE_1
|
|
|
|
dec_002:
|
|
out dx, ax
|
|
call delay_us
|
|
|
|
or ax, EE_SHIFT_CLK
|
|
out dx, ax
|
|
call delay_us
|
|
|
|
shl edi,1
|
|
|
|
in ax, dx
|
|
and ax, EE_DATA_READ
|
|
cmp ax,0
|
|
jz dec_003
|
|
inc edi
|
|
|
|
dec_003:
|
|
loop dec_001
|
|
|
|
mov ax, EE_ENB
|
|
out dx, ax
|
|
call delay_us
|
|
|
|
mov ax, 0x4800
|
|
out dx, ax
|
|
call delay_us
|
|
|
|
mov eax, edi
|
|
|
|
ret
|
|
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; I8255x_reset
|
|
; Description
|
|
; Place the chip (ie, the ethernet card) into a virgin state
|
|
; No inputs
|
|
; All registers destroyed
|
|
;
|
|
;***************************************************************************
|
|
I8255x_reset:
|
|
ret
|
|
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; I8255x_probe
|
|
; Description
|
|
; Searches for an ethernet card, enables it and clears the rx buffer
|
|
; If a card was found, it enables the ethernet -> TCPIP link
|
|
;
|
|
;***************************************************************************
|
|
I8255x_probe:
|
|
mov eax, [io_addr]
|
|
|
|
mov ebx, [pci_bus]
|
|
mov ecx, [pci_dev]
|
|
mov edx, 0x04 ; PCI_COMMAND
|
|
call pcibios_read_config_word
|
|
|
|
or ax, 0x05
|
|
mov ebx, [pci_bus]
|
|
mov ecx, [pci_dev]
|
|
mov edx, 0x04 ; PCI_COMMAND
|
|
call pcibios_write_config_word
|
|
|
|
mov ebx, 0x6000000
|
|
mov ecx, 27
|
|
call do_eeprom_cmd
|
|
and eax, 0xffe0000
|
|
cmp eax, 0xffe0000
|
|
je bige
|
|
|
|
mov ebx, 0x1800000
|
|
mov ecx, 0x40
|
|
jmp doread
|
|
|
|
bige:
|
|
mov ebx, 0x6000000
|
|
mov ecx, 0x100
|
|
|
|
doread:
|
|
; do-eeprom-cmd will destroy all registers
|
|
; we have eesize in ecx
|
|
; read_cmd in ebx
|
|
|
|
; Ignore full eeprom - just load the mac address
|
|
mov ecx, 0
|
|
|
|
drlp:
|
|
push ecx ; save count
|
|
push ebx
|
|
mov eax, ecx
|
|
shl eax, 16
|
|
or ebx, eax
|
|
mov ecx, 27
|
|
call do_eeprom_cmd
|
|
|
|
pop ebx
|
|
pop ecx
|
|
|
|
mov edx, ecx
|
|
shl edx, 2
|
|
mov esi, eeprom_data
|
|
add esi, edx
|
|
mov [esi], eax
|
|
|
|
inc ecx
|
|
cmp ecx, 16
|
|
jne drlp
|
|
|
|
; OK, we have the MAC address.
|
|
; Now reset the card
|
|
|
|
mov edx, [io_addr]
|
|
add dx, 8 ; SCBPort
|
|
xor eax, eax ; The reset cmd == 0
|
|
out dx, eax
|
|
|
|
mov esi, 10
|
|
call delay_ms ; Give the card time to warm up.
|
|
|
|
mov eax, lstats
|
|
mov edx, [io_addr]
|
|
add edx, 4 ; SCBPointer
|
|
out dx, eax
|
|
|
|
mov eax, 0x0140 ; INT_MASK | CU_STATSADDR
|
|
mov edx, [io_addr]
|
|
add edx, 2 ; SCBCmd
|
|
out dx, ax
|
|
|
|
call wait_for_cmd_done
|
|
|
|
mov eax, 0
|
|
mov edx, [io_addr]
|
|
add edx, 4 ; SCBPointer
|
|
out dx, eax
|
|
|
|
mov eax, 0x0106 ; INT_MASK | RX_ADDR_LOAD
|
|
mov edx, [io_addr]
|
|
add edx, 2 ; SCBCmd
|
|
out dx, ax
|
|
|
|
call wait_for_cmd_done
|
|
|
|
; build rxrd structure
|
|
mov ax, 0x0001
|
|
mov [rxfd_status], ax
|
|
mov ax, 0x0000
|
|
mov [rxfd_command], ax
|
|
|
|
mov eax, rxfd_status
|
|
mov [rxfd_link], eax
|
|
|
|
mov eax, Ether_buffer
|
|
mov [rxfd_rx_buf_addr], eax
|
|
|
|
mov ax, 0
|
|
mov [rxfd_count], ax
|
|
|
|
mov ax, 1528
|
|
mov [rxfd_size], ax
|
|
|
|
mov edx, [io_addr]
|
|
add edx, 4 ; SCBPointer
|
|
|
|
mov eax, rxfd_status
|
|
out dx, eax
|
|
|
|
mov edx, [io_addr]
|
|
add edx, 2 ; SCBCmd
|
|
|
|
mov ax, 0x0101 ; INT_MASK | RX_START
|
|
out dx, ax
|
|
|
|
call wait_for_cmd_done
|
|
|
|
; start the reciver
|
|
|
|
mov ax, 0
|
|
mov [rxfd_status], ax
|
|
|
|
mov ax, 0xc000
|
|
mov [rxfd_command], ax
|
|
|
|
mov edx, [io_addr]
|
|
add edx, 4 ; SCBPointer
|
|
|
|
mov eax, rxfd_status
|
|
out dx, eax
|
|
|
|
mov edx, [io_addr]
|
|
add edx, 2 ; SCBCmd
|
|
|
|
mov ax, 0x0101 ; INT_MASK | RX_START
|
|
out dx, ax
|
|
|
|
; Init TX Stuff
|
|
|
|
mov edx, [io_addr]
|
|
add edx, 4 ; SCBPointer
|
|
|
|
mov eax, 0
|
|
out dx, eax
|
|
|
|
mov edx, [io_addr]
|
|
add edx, 2 ; SCBCmd
|
|
|
|
mov ax, 0x0160 ; INT_MASK | CU_CMD_BASE
|
|
out dx, ax
|
|
|
|
call wait_for_cmd_done
|
|
|
|
; Set TX Base address
|
|
|
|
; First, set up confcmd values
|
|
|
|
mov ax, 2
|
|
mov [confcmd_command], ax
|
|
mov eax, txfd
|
|
mov [confcmd_link], eax
|
|
|
|
mov ax, 1
|
|
mov [txfd_command], ax ; CmdIASetup
|
|
|
|
mov ax, 0
|
|
mov [txfd_status], ax
|
|
|
|
mov eax, confcmd
|
|
mov [txfd_link], eax
|
|
|
|
; ETH_ALEN is 6 bytes
|
|
|
|
mov esi, eeprom_data
|
|
mov edi, node_addr
|
|
mov ecx, 3
|
|
drp000:
|
|
mov eax, [esi]
|
|
mov [edi], al
|
|
shr eax, 8
|
|
inc edi
|
|
mov [edi], al
|
|
inc edi
|
|
add esi, 4
|
|
loop drp000
|
|
|
|
; Hard code your MAC address into node_addr at this point,
|
|
; If you cannot read the MAC address from the eeprom in the previous step.
|
|
; You also have to write the mac address into txfd_tx_desc_addr, rather
|
|
; than taking data from eeprom_data
|
|
|
|
mov esi, eeprom_data
|
|
mov edi, txfd_tx_desc_addr
|
|
mov ecx, 3
|
|
drp001:
|
|
mov eax, [esi]
|
|
mov [edi], al
|
|
shr eax, 8
|
|
inc edi
|
|
mov [edi], al
|
|
inc edi
|
|
add esi, 4
|
|
loop drp001
|
|
|
|
mov esi, eeprom_data + (6 * 4)
|
|
mov eax, [esi]
|
|
shr eax, 8
|
|
and eax, 0x3f
|
|
cmp eax, 4 ; DP83840
|
|
je drp002
|
|
cmp eax, 10 ; DP83840A
|
|
je drp002
|
|
jmp drp003
|
|
|
|
drp002:
|
|
mov ebx, [esi]
|
|
and ebx, 0x1f
|
|
push ebx
|
|
mov ecx, 23
|
|
call mdio_read
|
|
pop ebx
|
|
or eax, 0x0422
|
|
mov ecx, 23
|
|
mov edx, eax
|
|
call mdio_write
|
|
|
|
drp003:
|
|
mov ax, 0x4002 ; Cmdsuspend | CmdConfigure
|
|
mov [confcmd_command], ax
|
|
mov ax, 0
|
|
mov [confcmd_status], ax
|
|
mov eax, txfd
|
|
mov [confcmd_link], eax
|
|
mov ebx, confcmd_data
|
|
mov al, 0x88 ; fifo of 8 each
|
|
mov [ebx + 1], al
|
|
mov al, 0
|
|
mov [ebx + 4], al
|
|
mov al, 0x80
|
|
mov [ebx + 5], al
|
|
mov al, 0x48
|
|
mov [ebx + 15], al
|
|
mov al, 0x80
|
|
mov [ebx + 19], al
|
|
mov al, 0x05
|
|
mov [ebx + 21], al
|
|
|
|
mov eax, txfd
|
|
mov edx, [io_addr]
|
|
add edx, 4 ; SCBPointer
|
|
out dx, eax
|
|
|
|
mov eax, 0x0110 ; INT_MASK | CU_START
|
|
mov edx, [io_addr]
|
|
add edx, 2 ; SCBCmd
|
|
out dx, ax
|
|
|
|
call wait_for_cmd_done
|
|
jmp skip
|
|
|
|
; wait for thing to start
|
|
drp004:
|
|
mov ax, [txfd_status]
|
|
cmp ax, 0
|
|
je drp004
|
|
|
|
skip:
|
|
; Indicate that we have successfully reset the card
|
|
mov eax, [pci_data]
|
|
mov [eth_status], eax
|
|
|
|
I8255x_exit:
|
|
ret
|
|
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; I8255x_poll
|
|
;
|
|
; Description
|
|
; Polls the ethernet card for a received packet
|
|
; Received data, if any, ends up in Ether_buffer
|
|
;
|
|
;***************************************************************************
|
|
I8255x_poll:
|
|
mov ax, 0 ; assume no data
|
|
mov [eth_rx_data_len], ax
|
|
|
|
mov ax, [rxfd_status]
|
|
cmp ax, 0
|
|
je i8p_exit
|
|
|
|
mov ax, 0
|
|
mov [rxfd_status], ax
|
|
|
|
mov ax, 0xc000
|
|
mov [rxfd_command], ax
|
|
|
|
mov edx, [io_addr]
|
|
add edx, 4 ; SCBPointer
|
|
|
|
mov eax, rxfd_status
|
|
out dx, eax
|
|
|
|
mov edx, [io_addr]
|
|
add edx, 2 ; SCBCmd
|
|
|
|
mov ax, 0x0101 ; INT_MASK | RX_START
|
|
out dx, ax
|
|
|
|
call wait_for_cmd_done
|
|
|
|
mov esi, rxfd_packet
|
|
mov edi, Ether_buffer
|
|
mov ecx, 1518
|
|
cld
|
|
rep movsb
|
|
|
|
mov ax, [rxfd_count]
|
|
and ax, 0x3fff
|
|
mov [eth_rx_data_len], ax
|
|
|
|
i8p_exit:
|
|
ret
|
|
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; I8255x_transmit
|
|
;
|
|
; Description
|
|
; Transmits a packet of data via the ethernet card
|
|
; Pointer to 48 bit destination address in edi
|
|
; Type of packet in bx
|
|
; size of packet in ecx
|
|
; pointer to packet data in esi
|
|
;
|
|
;***************************************************************************
|
|
I8255x_transmit:
|
|
|
|
mov [hdr_type], bx
|
|
|
|
mov eax, [edi]
|
|
mov [hdr_dst_addr], eax
|
|
mov ax, [edi+4]
|
|
mov [hdr_dst_addr+4], ax
|
|
|
|
mov eax, [node_addr]
|
|
mov [hdr_src_addr], eax
|
|
mov ax, [node_addr+4]
|
|
mov [hdr_src_addr+4], ax
|
|
|
|
mov edx, [io_addr]
|
|
in ax, dx
|
|
and ax, 0xfc00
|
|
out dx, ax
|
|
|
|
xor ax, ax
|
|
mov [txfd_status], ax
|
|
mov ax, 0x400C ; Cmdsuspend | CmdTx | CmdTxFlex
|
|
mov [txfd_command], ax
|
|
mov eax, txfd
|
|
mov [txfd_link], eax
|
|
mov eax, 0x02208000
|
|
mov [txfd_count], eax
|
|
mov eax, txfd_tx_buf_addr0
|
|
mov [txfd_tx_desc_addr], eax
|
|
mov eax, hdr
|
|
mov [txfd_tx_buf_addr0], eax
|
|
mov eax, 14 ; sizeof hdr
|
|
mov [txfd_tx_buf_size0], eax
|
|
|
|
; Copy the buffer address and size in
|
|
mov eax, esi
|
|
mov [txfd_tx_buf_addr1], eax
|
|
mov eax, ecx
|
|
mov [txfd_tx_buf_size1], eax
|
|
|
|
mov eax, txfd
|
|
mov edx, [io_addr]
|
|
add edx, 4 ; SCBPointer
|
|
out dx, eax
|
|
|
|
mov ax, 0x0110 ; INT_MASK | CU_START
|
|
mov edx, [io_addr]
|
|
add edx, 2 ; SCBCmd
|
|
out dx, ax
|
|
|
|
call wait_for_cmd_done
|
|
|
|
mov edx, [io_addr]
|
|
in ax, dx
|
|
|
|
I8t_001:
|
|
mov ax, [txfd_status]
|
|
cmp ax, 0
|
|
je I8t_001
|
|
|
|
mov edx, [io_addr]
|
|
in ax, dx
|
|
|
|
ret |