kolibrios-gitea/kernel/branches/net/network/udp.inc
hidnplayr 445f854cae Correct use of TYPE and PROTOCOL parameters in socket function
git-svn-id: svn://kolibrios.org@1542 a494cfbc-eb01-0410-851d-a64ba20cac60
2010-07-31 11:17:06 +00:00

334 lines
7.5 KiB
PHP

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2010. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; UDP.INC ;;
;; ;;
;; Part of the tcp/ip network stack for KolibriOS ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
struct UDP_Packet
.SourcePort dw ?
.DestinationPort dw ?
.Length dw ? ; Length of (UDP Header + Data)
.Checksum dw ?
.Data:
ends
align 4
uglobal
UDP_PACKETS_TX rd MAX_IP
UDP_PACKETS_RX rd MAX_IP
endg
;-----------------------------------------------------------------
;
; UDP_init
;
; This function resets all UDP variables
;
;-----------------------------------------------------------------
macro UDP_init {
xor eax, eax
mov edi, UDP_PACKETS_TX
mov ecx, 2*MAX_IP
rep stosd
}
macro UDP_checksum IP1, IP2 { ; esi = ptr to udp packet, ecx = packet size, destroys: ecx, edx
; Pseudoheader
mov edx, IP_PROTO_UDP
add dl, [IP1+1]
adc dh, [IP1+0]
adc dl, [IP1+3]
adc dh, [IP1+2]
adc dl, [IP2+1]
adc dh, [IP2+0]
adc dl, [IP2+3]
adc dh, [IP2+2]
adc dl, cl ; byte[esi+UDP_Packet.Length+1]
adc dh, ch ; byte[esi+UDP_Packet.Length+0]
; Done with pseudoheader, now do real header
adc dl, byte[esi+UDP_Packet.SourcePort+1]
adc dh, byte[esi+UDP_Packet.SourcePort+0]
adc dl, byte[esi+UDP_Packet.DestinationPort+1]
adc dh, byte[esi+UDP_Packet.DestinationPort+0]
adc dl, byte[esi+UDP_Packet.Length+1]
adc dh, byte[esi+UDP_Packet.Length+0]
adc edx, 0
; Done with header, now do data
push esi
movzx ecx, [esi+UDP_Packet.Length]
rol cx , 8
sub cx , UDP_Packet.Data
add esi, UDP_Packet.Data
call checksum_1
call checksum_2
pop esi
add [esi+UDP_Packet.Checksum], dx ; this final instruction will set or clear ZF :)
}
;-----------------------------------------------------------------
;
; UDP_input:
;
; Called by IPv4_input,
; this procedure will inject the udp data diagrams in the application sockets.
;
; IN: [esp] = Pointer to buffer
; [esp+4] = size of buffer
; ebx = ptr to device struct
; ecx = UDP Packet size
; edx = ptr to UDP header
;
; esi = ipv4 source address
; edi = ipv4 dest address
;
; OUT: /
;
;-----------------------------------------------------------------
align 4
UDP_input:
DEBUGF 1,"UDP_input, size:%u\n", ecx
; First validate, checksum:
neg [edx+UDP_Packet.Checksum] ; substract chechksum from 0
jz .no_checksum ; if checksum is zero, it is considered valid and we continue processing
; otherwise, we will re-calculate the checksum and add it to this value, thus creating 0 when it is correct
push edx
push edi
push esi
mov esi, edx
UDP_checksum (esp), (esp+4)
pop edi
pop esi ; we dont need it, but it is smaller then add esp, 4
pop edx
jnz .checksum_mismatch
.no_checksum:
DEBUGF 1,"UDP Checksum is correct\n"
; Look for a socket where
; IP Packet UDP Destination Port = local Port
; IP Packet SA = Remote IP
mov eax, net_sockets
.try_more:
mov si , [edx + UDP_Packet.DestinationPort] ; get the local port from the IP Packet's UDP header
rol si , 8
.next_socket:
mov eax, [eax + SOCKET.NextPtr]
or eax, eax
jz .dump
cmp [eax + SOCKET.Domain], AF_INET4
jne .next_socket
cmp [eax + SOCKET.Protocol], IP_PROTO_UDP
jne .next_socket
cmp [eax + UDP_SOCKET.LocalPort], si
jne .next_socket
DEBUGF 1,"using socket: %x\n", eax
;;; TODO: when packet is processed, check more sockets!
cmp [eax + IP_SOCKET.RemoteIP], 0xffffffff
je @f
cmp [eax + IP_SOCKET.RemoteIP], edi ; edi is the packets source address
jne .try_more
@@:
cmp [eax + UDP_SOCKET.firstpacket], 0
jz .updateport
mov si, [edx + UDP_Packet.SourcePort]
rol si, 8
cmp [eax + UDP_SOCKET.RemotePort], si
jne .dump
push ebx
lea ebx, [eax + SOCKET.lock]
call wait_mutex
pop ebx
.updatesock:
inc [UDP_PACKETS_RX]
DEBUGF 1,"Found valid UDP packet for socket %x\n", eax
lea esi, [edx + UDP_Packet.Data]
movzx ecx, [edx + UDP_Packet.Length]
rol cx , 8
sub cx , UDP_Packet.Data
jmp SOCKET_input
.updateport:
push ebx
lea ebx, [eax + SOCKET.lock]
call wait_mutex
pop ebx
mov si, [edx + UDP_Packet.SourcePort]
rol si, 8
DEBUGF 1,"Changing remote port to: %u\n", si
mov [eax + UDP_SOCKET.RemotePort], si
inc [eax + UDP_SOCKET.firstpacket]
jmp .updatesock
.checksum_mismatch:
DEBUGF 2,"UDP_Handler - checksum mismatch\n"
.dump:
call kernel_free
add esp, 4 ; pop (balance stack)
DEBUGF 2,"UDP_Handler - dumping\n"
ret
;-----------------------------------------------------------------
;
; UDP_output
;
; IN: eax = socket pointer
; ecx = number of bytes to send
; esi = pointer to data
;
;-----------------------------------------------------------------
align 4
UDP_output:
DEBUGF 1,"UDP_output: socket:%x, bytes: %u, data ptr: %x\n", eax, ecx, esi
mov dx, [eax + UDP_SOCKET.RemotePort]
DEBUGF 1,"remote port: %u\n", dx
rol dx, 8
rol edx, 16
mov dx, [eax + UDP_SOCKET.LocalPort]
DEBUGF 1,"local port: %u\n", dx
rol dx, 8
mov ebx, [eax + IP_SOCKET.LocalIP]
mov eax, [eax + IP_SOCKET.RemoteIP]
mov di, IP_PROTO_UDP shl 8 + 128
sub esp, 8 ; Data ptr and data size will be placed here
add ecx, UDP_Packet.Data
;;; TODO: fragment id
push edx esi
call IPv4_output
jz .fail
mov [esp + 8], eax ; pointer to buffer start
mov [esp + 8 + 4], edx ; buffer size
mov [edi + UDP_Packet.Length], cx
rol [edi + UDP_Packet.Length], 8
pop esi
push edi ecx
sub ecx, UDP_Packet.Data
add edi, UDP_Packet.Data
shr ecx, 2
rep movsd
mov ecx, [esp]
and ecx, 3
rep movsb
pop ecx edi
pop dword [edi + UDP_Packet.SourcePort]
; Checksum
mov esi, edi
mov [edi + UDP_Packet.Checksum], 0
UDP_checksum (edi-4), (edi-8) ; TODO: fix this, IPv4 packet could have options..
inc [UDP_PACKETS_TX]
DEBUGF 1,"Sending UDP Packet to device %x\n", ebx
call [ebx + NET_DEVICE.transmit]
ret
.fail:
DEBUGF 1,"UDP_output: failed\n"
add esp, 4+4+8
xor eax, eax
ret
;---------------------------------------------------------------------------
;
; UDP_API
;
; This function is called by system function 75
;
; IN: subfunction number in bl
; device number in bh
; ecx, edx, .. depends on subfunction
;
; OUT:
;
;---------------------------------------------------------------------------
align 4
UDP_API:
movzx eax, bh
shl eax, 2
test bl, bl
jz .packets_tx ; 0
dec bl
jz .packets_rx ; 1
.error:
mov eax, -1
ret
.packets_tx:
add eax, UDP_PACKETS_TX
mov eax, [eax]
ret
.packets_rx:
add eax, UDP_PACKETS_RX
mov eax, [eax]
ret