forked from KolibriOS/kolibrios
791 lines
28 KiB
NASM
791 lines
28 KiB
NASM
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
;; ;;
|
|
;; Copyright (C) KolibriOS team 2004-2012. All rights reserved. ;;
|
|
;; Distributed under terms of the GNU General Public License ;;
|
|
;; ;;
|
|
;; i8254x driver for KolibriOS ;;
|
|
;; ;;
|
|
;; based on i8254x.asm from baremetal os ;;
|
|
;; ;;
|
|
;; Written by hidnplayr (hidnplayr@gmail.com) ;;
|
|
;; ;;
|
|
;; GNU GENERAL PUBLIC LICENSE ;;
|
|
;; Version 2, June 1991 ;;
|
|
;; ;;
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
|
; TODO: make better use of the available descriptors
|
|
|
|
format MS COFF
|
|
|
|
API_VERSION = 0x01000100
|
|
DRIVER_VERSION = 5
|
|
|
|
MAX_DEVICES = 16
|
|
|
|
DEBUG = 1
|
|
__DEBUG__ = 1
|
|
__DEBUG_LEVEL__ = 1
|
|
|
|
MAX_PKT_SIZE = 16384 ; Maximum packet size
|
|
|
|
|
|
include 'proc32.inc'
|
|
include 'imports.inc'
|
|
include 'fdo.inc'
|
|
include '../struct.inc'
|
|
include 'netdrv.inc'
|
|
|
|
public START
|
|
public service_proc
|
|
public version
|
|
|
|
|
|
|
|
; Register list
|
|
REG_CTRL = 0x0000 ; Control Register
|
|
REG_STATUS = 0x0008 ; Device Status Register
|
|
REG_CTRLEXT = 0x0018 ; Extended Control Register
|
|
REG_MDIC = 0x0020 ; MDI Control Register
|
|
REG_FCAL = 0x0028 ; Flow Control Address Low
|
|
REG_FCAH = 0x002C ; Flow Control Address High
|
|
REG_FCT = 0x0030 ; Flow Control Type
|
|
REG_VET = 0x0038 ; VLAN Ether Type
|
|
REG_ICR = 0x00C0 ; Interrupt Cause Read
|
|
REG_ITR = 0x00C4 ; Interrupt Throttling Register
|
|
REG_ICS = 0x00C8 ; Interrupt Cause Set Register
|
|
REG_IMS = 0x00D0 ; Interrupt Mask Set/Read Register
|
|
REG_IMC = 0x00D8 ; Interrupt Mask Clear Register
|
|
REG_RCTL = 0x0100 ; Receive Control Register
|
|
REG_FCTTV = 0x0170 ; Flow Control Transmit Timer Value
|
|
REG_TXCW = 0x0178 ; Transmit Configuration Word
|
|
REG_RXCW = 0x0180 ; Receive Configuration Word
|
|
REG_TCTL = 0x0400 ; Transmit Control Register
|
|
REG_TIPG = 0x0410 ; Transmit Inter Packet Gap
|
|
|
|
REG_LEDCTL = 0x0E00 ; LED Control
|
|
REG_PBA = 0x1000 ; Packet Buffer Allocation
|
|
|
|
REG_RDBAL = 0x2800 ; RX Descriptor Base Address Low
|
|
REG_RDBAH = 0x2804 ; RX Descriptor Base Address High
|
|
REG_RDLEN = 0x2808 ; RX Descriptor Length
|
|
REG_RDH = 0x2810 ; RX Descriptor Head
|
|
REG_RDT = 0x2818 ; RX Descriptor Tail
|
|
REG_RDTR = 0x2820 ; RX Delay Timer Register
|
|
REG_RXDCTL = 0x3828 ; RX Descriptor Control
|
|
REG_RADV = 0x282C ; RX Int. Absolute Delay Timer
|
|
REG_RSRPD = 0x2C00 ; RX Small Packet Detect Interrupt
|
|
|
|
REG_TXDMAC = 0x3000 ; TX DMA Control
|
|
REG_TDBAL = 0x3800 ; TX Descriptor Base Address Low
|
|
REG_TDBAH = 0x3804 ; TX Descriptor Base Address High
|
|
REG_TDLEN = 0x3808 ; TX Descriptor Length
|
|
REG_TDH = 0x3810 ; TX Descriptor Head
|
|
REG_TDT = 0x3818 ; TX Descriptor Tail
|
|
REG_TIDV = 0x3820 ; TX Interrupt Delay Value
|
|
REG_TXDCTL = 0x3828 ; TX Descriptor Control
|
|
REG_TADV = 0x382C ; TX Absolute Interrupt Delay Value
|
|
REG_TSPMT = 0x3830 ; TCP Segmentation Pad & Min Threshold
|
|
|
|
REG_RXCSUM = 0x5000 ; RX Checksum Control
|
|
|
|
; Register list for i8254x
|
|
I82542_REG_RDTR = 0x0108 ; RX Delay Timer Register
|
|
I82542_REG_RDBAL = 0x0110 ; RX Descriptor Base Address Low
|
|
I82542_REG_RDBAH = 0x0114 ; RX Descriptor Base Address High
|
|
I82542_REG_RDLEN = 0x0118 ; RX Descriptor Length
|
|
I82542_REG_RDH = 0x0120 ; RDH for i82542
|
|
I82542_REG_RDT = 0x0128 ; RDT for i82542
|
|
I82542_REG_TDBAL = 0x0420 ; TX Descriptor Base Address Low
|
|
I82542_REG_TDBAH = 0x0424 ; TX Descriptor Base Address Low
|
|
I82542_REG_TDLEN = 0x0428 ; TX Descriptor Length
|
|
I82542_REG_TDH = 0x0430 ; TDH for i82542
|
|
I82542_REG_TDT = 0x0438 ; TDT for i82542
|
|
|
|
; CTRL - Control Register (0x0000)
|
|
CTRL_FD = 0x00000001 ; Full Duplex
|
|
CTRL_LRST = 0x00000008 ; Link Reset
|
|
CTRL_ASDE = 0x00000020 ; Auto-speed detection
|
|
CTRL_SLU = 0x00000040 ; Set Link Up
|
|
CTRL_ILOS = 0x00000080 ; Invert Loss of Signal
|
|
CTRL_SPEED_MASK = 0x00000300 ; Speed selection
|
|
CTRL_SPEED_SHIFT = 8
|
|
CTRL_FRCSPD = 0x00000800 ; Force Speed
|
|
CTRL_FRCDPLX = 0x00001000 ; Force Duplex
|
|
CTRL_SDP0_DATA = 0x00040000 ; SDP0 data
|
|
CTRL_SDP1_DATA = 0x00080000 ; SDP1 data
|
|
CTRL_SDP0_IODIR = 0x00400000 ; SDP0 direction
|
|
CTRL_SDP1_IODIR = 0x00800000 ; SDP1 direction
|
|
CTRL_RST = 0x04000000 ; Device Reset
|
|
CTRL_RFCE = 0x08000000 ; RX Flow Ctrl Enable
|
|
CTRL_TFCE = 0x10000000 ; TX Flow Ctrl Enable
|
|
CTRL_VME = 0x40000000 ; VLAN Mode Enable
|
|
CTRL_PHY_RST = 0x80000000 ; PHY reset
|
|
|
|
; STATUS - Device Status Register (0x0008)
|
|
STATUS_FD = 0x00000001 ; Full Duplex
|
|
STATUS_LU = 0x00000002 ; Link Up
|
|
STATUS_TXOFF = 0x00000010 ; Transmit paused
|
|
STATUS_TBIMODE = 0x00000020 ; TBI Mode
|
|
STATUS_SPEED_MASK = 0x000000C0 ; Link Speed setting
|
|
STATUS_SPEED_SHIFT = 6
|
|
STATUS_ASDV_MASK = 0x00000300 ; Auto Speed Detection
|
|
STATUS_ASDV_SHIFT = 8
|
|
STATUS_PCI66 = 0x00000800 ; PCI bus speed
|
|
STATUS_BUS64 = 0x00001000 ; PCI bus width
|
|
STATUS_PCIX_MODE = 0x00002000 ; PCI-X mode
|
|
STATUS_PCIXSPD_MASK = 0x0000C000 ; PCI-X speed
|
|
STATUS_PCIXSPD_SHIFT = 14
|
|
|
|
; CTRL_EXT - Extended Device Control Register (0x0018)
|
|
CTRLEXT_PHY_INT = 0x00000020 ; PHY interrupt
|
|
CTRLEXT_SDP6_DATA = 0x00000040 ; SDP6 data
|
|
CTRLEXT_SDP7_DATA = 0x00000080 ; SDP7 data
|
|
CTRLEXT_SDP6_IODIR = 0x00000400 ; SDP6 direction
|
|
CTRLEXT_SDP7_IODIR = 0x00000800 ; SDP7 direction
|
|
CTRLEXT_ASDCHK = 0x00001000 ; Auto-Speed Detect Chk
|
|
CTRLEXT_EE_RST = 0x00002000 ; EEPROM reset
|
|
CTRLEXT_SPD_BYPS = 0x00008000 ; Speed Select Bypass
|
|
CTRLEXT_RO_DIS = 0x00020000 ; Relaxed Ordering Dis.
|
|
CTRLEXT_LNKMOD_MASK = 0x00C00000 ; Link Mode
|
|
CTRLEXT_LNKMOD_SHIFT = 22
|
|
|
|
; MDIC - MDI Control Register (0x0020)
|
|
MDIC_DATA_MASK = 0x0000FFFF ; Data
|
|
MDIC_REG_MASK = 0x001F0000 ; PHY Register
|
|
MDIC_REG_SHIFT = 16
|
|
MDIC_PHY_MASK = 0x03E00000 ; PHY Address
|
|
MDIC_PHY_SHIFT = 21
|
|
MDIC_OP_MASK = 0x0C000000 ; Opcode
|
|
MDIC_OP_SHIFT = 26
|
|
MDIC_R = 0x10000000 ; Ready
|
|
MDIC_I = 0x20000000 ; Interrupt Enable
|
|
MDIC_E = 0x40000000 ; Error
|
|
|
|
; ICR - Interrupt Cause Read (0x00c0)
|
|
ICR_TXDW = 0x00000001 ; TX Desc Written back
|
|
ICR_TXQE = 0x00000002 ; TX Queue Empty
|
|
ICR_LSC = 0x00000004 ; Link Status Change
|
|
ICR_RXSEQ = 0x00000008 ; RX S= ence Error
|
|
ICR_RXDMT0 = 0x00000010 ; RX Desc min threshold reached
|
|
ICR_RXO = 0x00000040 ; RX Overrun
|
|
ICR_RXT0 = 0x00000080 ; RX Timer Interrupt
|
|
ICR_MDAC = 0x00000200 ; MDIO Access Complete
|
|
ICR_RXCFG = 0x00000400
|
|
ICR_PHY_INT = 0x00001000 ; PHY Interrupt
|
|
ICR_GPI_SDP6 = 0x00002000 ; GPI on SDP6
|
|
ICR_GPI_SDP7 = 0x00004000 ; GPI on SDP7
|
|
ICR_TXD_LOW = 0x00008000 ; TX Desc low threshold hit
|
|
ICR_SRPD = 0x00010000 ; Small RX packet detected
|
|
|
|
; RCTL - Receive Control Register (0x0100)
|
|
RCTL_EN = 0x00000002 ; Receiver Enable
|
|
RCTL_SBP = 0x00000004 ; Store Bad Packets
|
|
RCTL_UPE = 0x00000008 ; Unicast Promiscuous Enabled
|
|
RCTL_MPE = 0x00000010 ; Xcast Promiscuous Enabled
|
|
RCTL_LPE = 0x00000020 ; Long Packet Reception Enable
|
|
RCTL_LBM_MASK = 0x000000C0 ; Loopback Mode
|
|
RCTL_LBM_SHIFT = 6
|
|
RCTL_RDMTS_MASK = 0x00000300 ; RX Desc Min Threshold Size
|
|
RCTL_RDMTS_SHIFT = 8
|
|
RCTL_MO_MASK = 0x00003000 ; Multicast Offset
|
|
RCTL_MO_SHIFT = 12
|
|
RCTL_BAM = 0x00008000 ; Broadcast Accept Mode
|
|
RCTL_BSIZE_MASK = 0x00030000 ; RX Buffer Size
|
|
RCTL_BSIZE_SHIFT = 16
|
|
RCTL_VFE = 0x00040000 ; VLAN Filter Enable
|
|
RCTL_CFIEN = 0x00080000 ; CFI Enable
|
|
RCTL_CFI = 0x00100000 ; Canonical Form Indicator Bit
|
|
RCTL_DPF = 0x00400000 ; Discard Pause Frames
|
|
RCTL_PMCF = 0x00800000 ; Pass MAC Control Frames
|
|
RCTL_BSEX = 0x02000000 ; Buffer Size Extension
|
|
RCTL_SECRC = 0x04000000 ; Strip Ethernet CRC
|
|
|
|
; TCTL - Transmit Control Register (0x0400)
|
|
TCTL_EN = 0x00000002 ; Transmit Enable
|
|
TCTL_PSP = 0x00000008 ; Pad short packets
|
|
TCTL_SWXOFF = 0x00400000 ; Software XOFF Transmission
|
|
|
|
; PBA - Packet Buffer Allocation (0x1000)
|
|
PBA_RXA_MASK = 0x0000FFFF ; RX Packet Buffer
|
|
PBA_RXA_SHIFT = 0
|
|
PBA_TXA_MASK = 0xFFFF0000 ; TX Packet Buffer
|
|
PBA_TXA_SHIFT = 16
|
|
|
|
; Flow Control Type
|
|
FCT_TYPE_DEFAULT = 0x8808
|
|
|
|
; === TX Descriptor fields ===
|
|
|
|
; TX Packet Length (word 2)
|
|
TXDESC_LEN_MASK = 0x0000ffff
|
|
|
|
; TX Descriptor CMD field (word 2)
|
|
TXDESC_IDE = 0x80000000 ; Interrupt Delay Enable
|
|
TXDESC_VLE = 0x40000000 ; VLAN Packet Enable
|
|
TXDESC_DEXT = 0x20000000 ; Extension
|
|
TXDESC_RPS = 0x10000000 ; Report Packet Sent
|
|
TXDESC_RS = 0x08000000 ; Report Status
|
|
TXDESC_IC = 0x04000000 ; Insert Checksum
|
|
TXDESC_IFCS = 0x02000000 ; Insert FCS
|
|
TXDESC_EOP = 0x01000000 ; End Of Packet
|
|
|
|
; TX Descriptor STA field (word 3)
|
|
TXDESC_TU = 0x00000008 ; Transmit Underrun
|
|
TXDESC_LC = 0x00000004 ; Late Collision
|
|
TXDESC_EC = 0x00000002 ; Excess Collisions
|
|
TXDESC_DD = 0x00000001 ; Descriptor Done
|
|
|
|
; === RX Descriptor fields ===
|
|
|
|
; RX Packet Length (word 2)
|
|
RXDESC_LEN_MASK = 0x0000ffff
|
|
|
|
; RX Descriptor STA field (word 3)
|
|
RXDESC_PIF = 0x00000080 ; Passed In-exact Filter
|
|
RXDESC_IPCS = 0x00000040 ; IP cksum calculated
|
|
RXDESC_TCPCS = 0x00000020 ; TCP cksum calculated
|
|
RXDESC_VP = 0x00000008 ; Packet is 802.1Q
|
|
RXDESC_IXSM = 0x00000004 ; Ignore cksum indication
|
|
RXDESC_EOP = 0x00000002 ; End Of Packet
|
|
RXDESC_DD = 0x00000001 ; Descriptor Done
|
|
|
|
|
|
virtual at ebx
|
|
device:
|
|
ETH_DEVICE
|
|
|
|
.mmio_addr dd ?
|
|
.pci_bus dd ?
|
|
.pci_dev dd ?
|
|
.irq_line db ?
|
|
|
|
.cur_tx dd ?
|
|
.last_tx dd ?
|
|
|
|
rb 0x100 - (($ - device) and 0xff)
|
|
.rx_desc rd 256/8
|
|
|
|
rb 0x100 - (($ - device) and 0xff)
|
|
.tx_desc rd 256/8
|
|
|
|
sizeof.device_struct = $ - device
|
|
|
|
end virtual
|
|
|
|
section '.flat' code readable align 16
|
|
|
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
;; ;;
|
|
;; proc START ;;
|
|
;; ;;
|
|
;; (standard driver proc) ;;
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
|
align 4
|
|
proc START stdcall, state:dword
|
|
|
|
cmp [state], 1
|
|
jne .exit
|
|
|
|
.entry:
|
|
|
|
DEBUGF 2,"Loading %s driver\n", my_service
|
|
stdcall RegService, my_service, service_proc
|
|
ret
|
|
|
|
.fail:
|
|
.exit:
|
|
xor eax, eax
|
|
ret
|
|
|
|
endp
|
|
|
|
|
|
|
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
;; ;;
|
|
;; proc SERVICE_PROC ;;
|
|
;; ;;
|
|
;; (standard driver proc) ;;
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
|
align 4
|
|
proc service_proc stdcall, ioctl:dword
|
|
|
|
mov edx, [ioctl]
|
|
mov eax, [IOCTL.io_code]
|
|
|
|
;------------------------------------------------------
|
|
|
|
cmp eax, 0 ;SRV_GETVERSION
|
|
jne @F
|
|
|
|
cmp [IOCTL.out_size], 4
|
|
jl .fail
|
|
mov eax, [IOCTL.output]
|
|
mov [eax], dword API_VERSION
|
|
|
|
xor eax, eax
|
|
ret
|
|
|
|
;------------------------------------------------------
|
|
@@:
|
|
cmp eax, 1 ;SRV_HOOK
|
|
jne .fail
|
|
|
|
cmp [IOCTL.inp_size], 3 ; Data input must be at least 3 bytes
|
|
jl .fail
|
|
|
|
mov eax, [IOCTL.input]
|
|
cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given
|
|
jne .fail ; other types arent supported for this card yet
|
|
|
|
; check if the device is already listed
|
|
|
|
mov esi, device_list
|
|
mov ecx, [devices]
|
|
test ecx, ecx
|
|
jz .firstdevice
|
|
|
|
; mov eax, [IOCTL.input] ; get the pci bus and device numbers
|
|
mov ax , [eax+1] ;
|
|
.nextdevice:
|
|
mov ebx, [esi]
|
|
cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte)
|
|
je .find_devicenum ; Device is already loaded, let's find it's device number
|
|
add esi, 4
|
|
loop .nextdevice
|
|
|
|
|
|
; This device doesnt have its own eth_device structure yet, lets create one
|
|
.firstdevice:
|
|
cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card
|
|
jge .fail
|
|
|
|
allocate_and_clear ebx, sizeof.device_struct, .fail ; Allocate the buffer for device structure
|
|
|
|
; Fill in the direct call addresses into the struct
|
|
|
|
mov [device.reset], reset
|
|
mov [device.transmit], transmit
|
|
mov [device.get_MAC], read_mac
|
|
mov [device.set_MAC], .fail
|
|
mov [device.unload], unload
|
|
mov [device.name], my_service
|
|
|
|
; save the pci bus and device numbers
|
|
|
|
mov eax, [IOCTL.input]
|
|
movzx ecx, byte [eax+1]
|
|
mov [device.pci_bus], ecx
|
|
movzx ecx, byte [eax+2]
|
|
mov [device.pci_dev], ecx
|
|
|
|
; Now, it's time to find the base mmio addres of the PCI device
|
|
|
|
find_mmio32 [device.pci_bus], [device.pci_dev], [device.mmio_addr]
|
|
|
|
; Create virtual mapping of the physical memory
|
|
|
|
push 1Bh ; PG_SW+PG_NOCACHE
|
|
push 10000h ; size of the map
|
|
push eax
|
|
call MapIoMem
|
|
mov [device.mmio_addr], eax
|
|
|
|
; We've found the mmio address, find IRQ now
|
|
|
|
find_irq byte [device.pci_bus], byte [device.pci_dev], [device.irq_line]
|
|
|
|
DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\
|
|
[device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.mmio_addr]:8
|
|
|
|
; Ok, the eth_device structure is ready, let's probe the device
|
|
call probe ; this function will output in eax
|
|
test eax, eax
|
|
jnz .err ; If an error occured, exit
|
|
|
|
mov eax, [devices] ; Add the device structure to our device list
|
|
mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device)
|
|
inc [devices] ;
|
|
|
|
call start_i8254x
|
|
|
|
mov [device.type], NET_TYPE_ETH
|
|
call NetRegDev
|
|
|
|
cmp eax, -1
|
|
je .destroy
|
|
|
|
ret
|
|
|
|
; If the device was already loaded, find the device number and return it in eax
|
|
|
|
.find_devicenum:
|
|
DEBUGF 1,"Trying to find device number of already registered device\n"
|
|
call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx
|
|
; into a device number in edi
|
|
mov eax, edi ; Application wants it in eax instead
|
|
DEBUGF 1,"Kernel says: %u\n", eax
|
|
ret
|
|
|
|
; If an error occured, remove all allocated data and exit (returning -1 in eax)
|
|
|
|
.destroy:
|
|
; todo: reset device into virgin state
|
|
|
|
.err:
|
|
stdcall KernelFree, ebx
|
|
|
|
.fail:
|
|
or eax, -1
|
|
ret
|
|
|
|
;------------------------------------------------------
|
|
endp
|
|
|
|
|
|
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
|
|
;; ;;
|
|
;; Actual Hardware dependent code starts here ;;
|
|
;; ;;
|
|
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
|
|
|
|
|
|
align 4
|
|
unload:
|
|
; TODO: (in this particular order)
|
|
;
|
|
; - Stop the device
|
|
; - Detach int handler
|
|
; - Remove device from local list (device_list)
|
|
; - call unregister function in kernel
|
|
; - Remove all allocated structures and buffers the card used
|
|
|
|
or eax, -1
|
|
|
|
ret
|
|
|
|
|
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
;;
|
|
;; probe: enables the device (if it really is I8254X)
|
|
;;
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
align 4
|
|
probe:
|
|
|
|
DEBUGF 1,"Probe\n"
|
|
|
|
make_bus_master byte [device.pci_bus], byte [device.pci_dev]
|
|
|
|
; TODO: validate the device
|
|
|
|
call read_mac
|
|
|
|
movzx eax, [device.irq_line]
|
|
DEBUGF 1,"Attaching int handler to irq %x\n", eax:1
|
|
stdcall AttachIntHandler, eax, int_handler, dword 0
|
|
test eax, eax
|
|
jnz @f
|
|
DEBUGF 1,"\nCould not attach int handler!\n"
|
|
; or eax, -1
|
|
; ret
|
|
@@:
|
|
|
|
|
|
reset_dontstart:
|
|
DEBUGF 1,"Reset\n"
|
|
|
|
mov esi, [device.mmio_addr]
|
|
|
|
mov dword [esi + REG_IMC], 0xffffffff ; Disable all interrupt causes
|
|
mov eax, dword [esi + REG_ICR] ; Clear any pending interrupts
|
|
mov dword [esi + REG_ITR], 0 ; Disable interrupt throttling logic
|
|
|
|
mov dword [esi + REG_PBA], 0x00000030 ; PBA: set the RX buffer size to 48KB (TX buffer is calculated as 64-RX buffer)
|
|
mov dword [esi + REG_RDTR], 0 ; RDTR: set no delay
|
|
|
|
mov dword [esi + REG_TXCW], 0x08008060 ; TXCW: set ANE, TxConfigWord (Half/Full duplex, Next Page Reqest)
|
|
|
|
mov eax, [esi + REG_CTRL]
|
|
or eax, 1 shl 6 + 1 shl 5
|
|
and eax, not (1 shl 3 + 1 shl 7 + 1 shl 30 + 1 shl 31)
|
|
mov dword [esi + REG_CTRL], eax ; CTRL: clear LRST, set SLU and ASDE, clear RSTPHY, VME, and ILOS
|
|
|
|
lea edi, [esi + 0x5200] ; MTA: reset
|
|
mov eax, 0xffffffff
|
|
stosd
|
|
stosd
|
|
stosd
|
|
stosd
|
|
|
|
stdcall KernelAlloc, 48*1024
|
|
mov dword [device.rx_desc + 16], eax
|
|
GetRealAddr
|
|
mov dword [device.rx_desc], eax
|
|
mov dword [device.rx_desc + 4], 0
|
|
|
|
lea eax, [device.rx_desc]
|
|
GetRealAddr
|
|
mov dword [esi + REG_RDBAL], eax ; Receive Descriptor Base Address Low
|
|
mov dword [esi + REG_RDBAH], 0 ; Receive Descriptor Base Address High
|
|
mov dword [esi + REG_RDLEN], (1 * 128) ; Receive Descriptor Length
|
|
mov dword [esi + REG_RDH], 0 ; Receive Descriptor Head
|
|
mov dword [esi + REG_RDT], 1 ; Receive Descriptor Tail
|
|
mov dword [esi + REG_RCTL], 0x04008006 ; Receiver Enable, Store Bad Packets, Broadcast Accept Mode, Strip Ethernet CRC from incoming packet
|
|
|
|
mov dword [device.tx_desc], 0
|
|
mov dword [device.tx_desc + 4], 0
|
|
mov dword [device.tx_desc + 16], 0
|
|
|
|
lea eax, [device.tx_desc]
|
|
GetRealAddr
|
|
mov dword [esi + REG_TDBAL], eax ; Transmit Descriptor Base Address Low
|
|
mov dword [esi + REG_TDBAH], 0 ; Transmit Descriptor Base Address High
|
|
mov dword [esi + REG_TDLEN], (1 * 128) ; Transmit Descriptor Length
|
|
mov dword [esi + REG_TDH], 0 ; Transmit Descriptor Head
|
|
mov dword [esi + REG_TDT], 0 ; Transmit Descriptor Tail
|
|
mov dword [esi + REG_TCTL], 0x010400fa ; Enabled, Pad Short Packets, 15 retrys, 64-byte COLD, Re-transmit on Late Collision
|
|
mov dword [esi + REG_TIPG], 0x0060200A ; IPGT 10, IPGR1 8, IPGR2 6
|
|
|
|
xor eax, eax
|
|
ret
|
|
|
|
start_i8254x:
|
|
|
|
xor eax, eax
|
|
mov [esi + REG_RDTR], eax ; Clear the Receive Delay Timer Register
|
|
mov [esi + REG_RADV], eax ; Clear the Receive Interrupt Absolute Delay Timer
|
|
mov [esi + REG_RSRPD], eax ; Clear the Receive Small Packet Detect Interrupt
|
|
or eax, 1 shl 0 + 1 shl 7 ; TXDW + RXT0
|
|
mov eax, -1 ;;;; hack!
|
|
mov [esi + REG_IMS], eax ; Enable interrupt types
|
|
|
|
mov [device.mtu], 1514
|
|
|
|
xor eax, eax
|
|
ret
|
|
|
|
align 4
|
|
reset:
|
|
call reset_dontstart
|
|
call start_i8254x
|
|
|
|
ret
|
|
|
|
|
|
|
|
align 4
|
|
read_mac:
|
|
|
|
DEBUGF 1,"Read MAC\n"
|
|
|
|
mov esi, [device.mmio_addr]
|
|
|
|
mov eax, [esi+0x5400] ; RAL
|
|
test eax, eax
|
|
jz .try_eeprom
|
|
|
|
mov dword [device.mac], eax
|
|
mov eax, [esi+0x5404] ; RAH
|
|
mov word [device.mac+4], ax
|
|
|
|
jmp .mac_ok
|
|
|
|
.try_eeprom:
|
|
mov dword [esi+0x14], 0x00000001
|
|
mov eax, [esi+0x14]
|
|
shr eax, 16
|
|
mov word [device.mac], ax
|
|
|
|
mov dword [esi+0x14], 0x00000101
|
|
mov eax, [esi+0x14]
|
|
shr eax, 16
|
|
mov word [device.mac+2], ax
|
|
|
|
mov dword [esi+0x14], 0x00000201
|
|
mov eax, [esi+0x14]
|
|
shr eax, 16
|
|
mov word [device.mac+4], ax
|
|
|
|
.mac_ok:
|
|
DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n",\
|
|
[device.mac+0]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2
|
|
|
|
ret
|
|
|
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
;; ;;
|
|
;; Transmit ;;
|
|
;; ;;
|
|
;; In: buffer pointer in [esp+4] ;;
|
|
;; size of buffer in [esp+8] ;;
|
|
;; pointer to device structure in ebx ;;
|
|
;; ;;
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
align 4
|
|
transmit:
|
|
DEBUGF 2,"\nTransmitting packet, buffer:%x, size:%u\n", [esp+4], [esp+8]
|
|
mov eax, [esp+4]
|
|
DEBUGF 2,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
|
|
[eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\
|
|
[eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\
|
|
[eax+13]:2,[eax+12]:2
|
|
|
|
cmp dword [esp + 8], 1514
|
|
jg .fail
|
|
cmp dword [esp + 8], 60
|
|
jl .fail
|
|
|
|
|
|
; Program the descriptor (use legacy mode)
|
|
lea edi, [device.tx_desc] ; Transmit Descriptor Base Address
|
|
mov dword [edi + 16], eax ; Store the data location (for driver)
|
|
GetRealAddr ;
|
|
mov dword [edi], eax ; Real addr (for i8254x)
|
|
mov dword [edi + 4], 0x00000000 ;
|
|
|
|
mov ecx, [esp + 8]
|
|
or ecx, 1 shl 24 + 1 shl 25 + 1 shl 27 ; EOP + IFCS + RS
|
|
mov dword [edi + 8], ecx ; Packet size
|
|
mov dword [edi + 12], 0x00000000
|
|
|
|
; Tell i8254x wich descriptor(s) we programmed
|
|
mov edi, [device.mmio_addr]
|
|
mov dword [edi + REG_TDH], 0 ; TDH - Transmit Descriptor Head
|
|
mov dword [edi + REG_TDT], 1 ; TDT - Transmit Descriptor Tail
|
|
|
|
; Update stats
|
|
inc [device.packets_tx]
|
|
mov eax, [esp + 8]
|
|
add dword [device.bytes_tx], eax
|
|
adc dword [device.bytes_tx + 4], 0
|
|
|
|
ret 8
|
|
|
|
.fail:
|
|
DEBUGF 1,"Send failed\n"
|
|
ret 8
|
|
|
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;
|
|
;; ;;
|
|
;; Interrupt handler ;;
|
|
;; ;;
|
|
;;;;;;;;;;;;;;;;;;;;;;;
|
|
align 4
|
|
int_handler:
|
|
DEBUGF 2,"\nIRQ %x\n", eax:2 ; no, you cant replace 'eax:2' with 'al', this must be a bug in FDO
|
|
|
|
;-------------------------------------------
|
|
; Find pointer of device wich made IRQ occur
|
|
|
|
mov esi, device_list
|
|
mov ecx, [devices]
|
|
test ecx, ecx
|
|
jz .fail
|
|
.nextdevice:
|
|
mov ebx, dword [esi]
|
|
|
|
mov edi, [device.mmio_addr]
|
|
test edi, edi
|
|
jz .nextdevice
|
|
|
|
;--------------------
|
|
; Get interrupt cause
|
|
|
|
mov eax, [edi + REG_ICR]
|
|
DEBUGF 2,"interrupt cause=%x\n", eax
|
|
|
|
;---------
|
|
; RX done?
|
|
|
|
test eax, ICR_RXDMT0
|
|
jz .no_rx
|
|
|
|
push eax
|
|
push .retaddr
|
|
|
|
; Get last descriptor addr
|
|
lea esi, [device.rx_desc]
|
|
|
|
cmp byte [esi + 12], 0 ; Check status field
|
|
je .retaddr
|
|
|
|
movzx ecx, word [esi + 8] ; Get the packet length
|
|
DEBUGF 2,"got %u bytes\n", ecx
|
|
push ecx
|
|
push dword [esi + 16] ; Get packet pointer
|
|
|
|
; Update stats
|
|
add dword [device.bytes_rx], ecx
|
|
adc dword [device.bytes_rx + 4], 0
|
|
inc dword [device.packets_rx]
|
|
|
|
; allocate new descriptor
|
|
stdcall KernelAlloc, 48*1024
|
|
mov dword [esi + 16], eax
|
|
GetRealAddr
|
|
mov dword [esi], eax
|
|
|
|
; reset descriptor status
|
|
mov esi, [device.mmio_addr]
|
|
mov dword [esi + REG_RDH], 0x00000000 ; Receive Descriptor Head
|
|
mov dword [esi + REG_RDT], 0x00000001 ; Receive Descriptor Tail
|
|
|
|
jmp EthReceiver
|
|
.retaddr:
|
|
pop eax
|
|
|
|
.no_rx:
|
|
|
|
;--------------
|
|
; Link Changed?
|
|
|
|
test eax, ICR_LSC
|
|
jz .no_link
|
|
|
|
DEBUGF 2,"Link Changed\n"
|
|
|
|
.no_link:
|
|
|
|
;---------------
|
|
; Transmit done?
|
|
|
|
test eax, ICR_TXDW
|
|
jz .no_tx
|
|
|
|
DEBUGF 2,"Transmit done\n"
|
|
|
|
lea edi, [device.tx_desc] ; Transmit Descriptor Base Address
|
|
push dword [edi + 16] ; Store the data location (for driver)
|
|
call KernelFree
|
|
|
|
.no_tx:
|
|
.fail:
|
|
ret
|
|
|
|
|
|
|
|
|
|
; End of code
|
|
|
|
section '.data' data readable writable align 16
|
|
align 4
|
|
|
|
devices dd 0
|
|
version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF)
|
|
my_service db 'I8254X',0 ; max 16 chars include zero
|
|
|
|
include_debug_strings ; All data wich FDO uses will be included here
|
|
|
|
device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling
|
|
|
|
|