forked from KolibriOS/kolibrios
280 lines
8.6 KiB
C++
280 lines
8.6 KiB
C++
;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
|
|
;***** Created: 2005-01-11 10:31 ******* Source: ATtiny12.xml ************
|
|
;*************************************************************************
|
|
;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
|
|
;*
|
|
;* Number : AVR000
|
|
;* File Name : "tn12def.inc"
|
|
;* Title : Register/Bit Definitions for the ATtiny12
|
|
;* Date : 2005-01-11
|
|
;* Version : 2.14
|
|
;* Support E-mail : avr@atmel.com
|
|
;* Target MCU : ATtiny12
|
|
;*
|
|
;* DESCRIPTION
|
|
;* When including this file in the assembly program file, all I/O register
|
|
;* names and I/O register bit names appearing in the data book can be used.
|
|
;* In addition, the six registers forming the three data pointers X, Y and
|
|
;* Z have been assigned names XL - ZH. Highest RAM address for Internal
|
|
;* SRAM is also defined
|
|
;*
|
|
;* The Register names are represented by their hexadecimal address.
|
|
;*
|
|
;* The Register Bit names are represented by their bit number (0-7).
|
|
;*
|
|
;* Please observe the difference in using the bit names with instructions
|
|
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
|
|
;* (skip if bit in register set/cleared). The following example illustrates
|
|
;* this:
|
|
;*
|
|
;* in r16,PORTB ;read PORTB latch
|
|
;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
|
|
;* out PORTB,r16 ;output to PORTB
|
|
;*
|
|
;* in r16,TIFR ;read the Timer Interrupt Flag Register
|
|
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
|
|
;* rjmp TOV0_is_set ;jump if set
|
|
;* ... ;otherwise do something else
|
|
;*************************************************************************
|
|
|
|
#ifndef _TN12DEF_INC_
|
|
#define _TN12DEF_INC_
|
|
|
|
|
|
#pragma partinc 0
|
|
|
|
; ***** SPECIFY DEVICE ***************************************************
|
|
.device ATtiny12
|
|
#pragma AVRPART ADMIN PART_NAME ATtiny12
|
|
.equ SIGNATURE_000 = 0x1e
|
|
.equ SIGNATURE_001 = 0x90
|
|
.equ SIGNATURE_002 = 0x05
|
|
|
|
#pragma AVRPART CORE CORE_VERSION V0E
|
|
|
|
|
|
; ***** I/O REGISTER DEFINITIONS *****************************************
|
|
; NOTE:
|
|
; Definitions marked "MEMORY MAPPED"are extended I/O ports
|
|
; and cannot be used with IN/OUT instructions
|
|
.equ SREG = 0x3f
|
|
.equ GIMSK = 0x3b
|
|
.equ GIFR = 0x3a
|
|
.equ TIMSK = 0x39
|
|
.equ TIFR = 0x38
|
|
.equ MCUCR = 0x35
|
|
.equ MCUSR = 0x34
|
|
.equ TCCR0 = 0x33
|
|
.equ TCNT0 = 0x32
|
|
.equ OSCCAL = 0x31
|
|
.equ WDTCR = 0x21
|
|
.equ EEAR = 0x1e
|
|
.equ EEDR = 0x1d
|
|
.equ EECR = 0x1c
|
|
.equ PORTB = 0x18
|
|
.equ DDRB = 0x17
|
|
.equ PINB = 0x16
|
|
.equ ACSR = 0x08
|
|
|
|
|
|
; ***** BIT DEFINITIONS **************************************************
|
|
|
|
; ***** ANALOG_COMPARATOR ************
|
|
; ACSR - Analog Comparator Control And Status Register
|
|
.equ ACIS0 = 0 ; Analog Comparator Interrupt Mode Select bit 0
|
|
.equ ACIS1 = 1 ; Analog Comparator Interrupt Mode Select bit 1
|
|
.equ ACIE = 3 ; Analog Comparator Interrupt Enable
|
|
.equ ACI = 4 ; Analog Comparator Interrupt Flag
|
|
.equ ACO = 5 ; Analog Comparator Output
|
|
.equ AINBG = 6 ; Analog Comparator Bandgap Select
|
|
.equ ACD = 7 ; Analog Comparator Disable
|
|
|
|
|
|
; ***** CPU **************************
|
|
; SREG - Status Register
|
|
.equ SREG_C = 0 ; Carry Flag
|
|
.equ SREG_Z = 1 ; Zero Flag
|
|
.equ SREG_N = 2 ; Negative Flag
|
|
.equ SREG_V = 3 ; Two's Complement Overflow Flag
|
|
.equ SREG_S = 4 ; Sign Bit
|
|
.equ SREG_H = 5 ; Half Carry Flag
|
|
.equ SREG_T = 6 ; Bit Copy Storage
|
|
.equ SREG_I = 7 ; Global Interrupt Enable
|
|
|
|
; MCUCR - MCU Control Register
|
|
.equ ISC00 = 0 ; Interrupt Sense Control 0 bit 0
|
|
.equ ISC01 = 1 ; Interrupt Sense Control 0 bit 1
|
|
.equ SM = 4 ; Sleep Mode
|
|
.equ SE = 5 ; Sleep Enable
|
|
.equ PUD = 6 ; Pull-up Disable
|
|
|
|
; MCUSR - MCU Status register
|
|
.equ PORF = 0 ; Power-On Reset Flag
|
|
.equ EXTRF = 1 ; External Reset Flag
|
|
.equ BORF = 2 ; Brown-out Reset Flag
|
|
.equ WDRF = 3 ; Watchdog Reset Flag
|
|
|
|
; OSCCAL - Status Register
|
|
.equ CAL0 = 0 ; Oscillator Calibration Value Bit 0
|
|
.equ CAL1 = 1 ; Oscillator Calibration Value Bit 1
|
|
.equ CAL2 = 2 ; Oscillator Calibration Value Bit 2
|
|
.equ CAL3 = 3 ; Oscillator Calibration Value Bit 3
|
|
.equ CAL4 = 4
|
|
.equ CAL5 = 5 ; Oscillator Calibration Value Bit 5
|
|
.equ CAL6 = 6 ; Oscillator Calibration Value Bit 6
|
|
.equ CAL7 = 7 ; Oscillator Calibration Value Bit 7
|
|
|
|
|
|
; ***** EXTERNAL_INTERRUPT ***********
|
|
; GIMSK - General Interrupt Mask Register
|
|
.equ PCIE = 5 ; Pin Change Interrupt Enable
|
|
.equ INT0 = 6 ; External Interrupt Request 0 Enable
|
|
|
|
; GIFR - General Interrupt Flag register
|
|
.equ PCIF = 5 ; Pin Change Interrupt Flag
|
|
.equ INTF0 = 6 ; External Interrupt Flag 0
|
|
|
|
|
|
; ***** EEPROM ***********************
|
|
; EEAR - EEPROM Read/Write Access
|
|
.equ EEAR0 = 0 ; EEPROM Read/Write Access bit 0
|
|
.equ EEAR1 = 1 ; EEPROM Read/Write Access bit 1
|
|
.equ EEAR2 = 2 ; EEPROM Read/Write Access bit 2
|
|
.equ EEAR3 = 3 ; EEPROM Read/Write Access bit 3
|
|
.equ EEAR4 = 4 ; EEPROM Read/Write Access bit 4
|
|
.equ EEAR5 = 5 ; EEPROM Read/Write Access bit 5
|
|
|
|
; EEDR - EEPROM Data Register
|
|
.equ EEDR0 = 0 ; EEPROM Data Register bit 0
|
|
.equ EEDR1 = 1 ; EEPROM Data Register bit 1
|
|
.equ EEDR2 = 2 ; EEPROM Data Register bit 2
|
|
.equ EEDR3 = 3 ; EEPROM Data Register bit 3
|
|
.equ EEDR4 = 4 ; EEPROM Data Register bit 4
|
|
.equ EEDR5 = 5 ; EEPROM Data Register bit 5
|
|
.equ EEDR6 = 6 ; EEPROM Data Register bit 6
|
|
.equ EEDR7 = 7 ; EEPROM Data Register bit 7
|
|
|
|
; EECR - EEPROM Control Register
|
|
.equ EERE = 0 ; EEPROM Read Enable
|
|
.equ EEWE = 1 ; EEPROM Write Enable
|
|
.equ EEMWE = 2 ; EEPROM Master Write Enable
|
|
.equ EERIE = 3 ; EEProm Ready Interrupt Enable
|
|
|
|
|
|
; ***** PORTB ************************
|
|
; PORTB - Data Register, Port B
|
|
.equ PORTB0 = 0 ;
|
|
.equ PB0 = 0 ; For compatibility
|
|
.equ PORTB1 = 1 ;
|
|
.equ PB1 = 1 ; For compatibility
|
|
.equ PORTB2 = 2 ;
|
|
.equ PB2 = 2 ; For compatibility
|
|
.equ PORTB3 = 3 ;
|
|
.equ PB3 = 3 ; For compatibility
|
|
.equ PORTB4 = 4 ;
|
|
.equ PB4 = 4 ; For compatibility
|
|
|
|
; DDRB - Data Direction Register, Port B
|
|
.equ DDB0 = 0 ;
|
|
.equ DDB1 = 1 ;
|
|
.equ DDB2 = 2 ;
|
|
.equ DDB3 = 3 ;
|
|
.equ DDB4 = 4 ;
|
|
.equ DDB5 = 5 ;
|
|
|
|
; PINB - Input Pins, Port B
|
|
.equ PINB0 = 0 ;
|
|
.equ PINB1 = 1 ;
|
|
.equ PINB2 = 2 ;
|
|
.equ PINB3 = 3 ;
|
|
.equ PINB4 = 4 ;
|
|
.equ PINB5 = 5 ;
|
|
|
|
|
|
; ***** TIMER_COUNTER_0 **************
|
|
; TIMSK - Timer/Counter Interrupt Mask Register
|
|
.equ TOIE0 = 1 ; Timer/Counter0 Overflow Interrupt Enable
|
|
|
|
; TIFR - Timer/Counter Interrupt Flag register
|
|
.equ TOV0 = 1 ; Timer/Counter0 Overflow Flag
|
|
|
|
; TCCR0 - Timer/Counter0 Control Register
|
|
.equ CS00 = 0 ; Clock Select0 bit 0
|
|
.equ CS01 = 1 ; Clock Select0 bit 1
|
|
.equ CS02 = 2 ; Clock Select0 bit 2
|
|
|
|
; TCNT0 - Timer Counter 0
|
|
.equ TCNT00 = 0 ; Timer Counter 0 bit 0
|
|
.equ TCNT01 = 1 ; Timer Counter 0 bit 1
|
|
.equ TCNT02 = 2 ; Timer Counter 0 bit 2
|
|
.equ TCNT03 = 3 ; Timer Counter 0 bit 3
|
|
.equ TCNT04 = 4 ; Timer Counter 0 bit 4
|
|
.equ TCNT05 = 5 ; Timer Counter 0 bit 5
|
|
.equ TCNT06 = 6 ; Timer Counter 0 bit 6
|
|
.equ TCNT07 = 7 ; Timer Counter 0 bit 7
|
|
|
|
|
|
; ***** WATCHDOG *********************
|
|
; WDTCR - Watchdog Timer Control Register
|
|
.equ WDP0 = 0 ; Watch Dog Timer Prescaler bit 0
|
|
.equ WDP1 = 1 ; Watch Dog Timer Prescaler bit 1
|
|
.equ WDP2 = 2 ; Watch Dog Timer Prescaler bit 2
|
|
.equ WDE = 3 ; Watch Dog Enable
|
|
.equ WDTOE = 4 ; RW
|
|
.equ WDDE = WDTOE ; For compatibility
|
|
|
|
|
|
|
|
; ***** LOCKSBITS ********************************************************
|
|
.equ LB1 = 0 ; Lockbit
|
|
.equ LB2 = 1 ; Lockbit
|
|
|
|
|
|
; ***** FUSES ************************************************************
|
|
; LOW fuse bits
|
|
|
|
|
|
|
|
; ***** CPU REGISTER DEFINITIONS *****************************************
|
|
.def XH = r27
|
|
.def XL = r26
|
|
.def YH = r29
|
|
.def YL = r28
|
|
.def ZH = r31
|
|
.def ZL = r30
|
|
|
|
|
|
|
|
; ***** DATA MEMORY DECLARATIONS *****************************************
|
|
.equ FLASHEND = 0x01ff ; Note: Word address
|
|
.equ IOEND = 0x003f
|
|
.equ SRAM_SIZE = 0
|
|
.equ RAMEND = 0x0000
|
|
.equ XRAMEND = 0x0000
|
|
.equ E2END = 0x003f
|
|
.equ EEPROMEND = 0x003f
|
|
.equ EEADRBITS = 6
|
|
#pragma AVRPART MEMORY PROG_FLASH 1024
|
|
#pragma AVRPART MEMORY EEPROM 64
|
|
#pragma AVRPART MEMORY INT_SRAM SIZE 0
|
|
#pragma AVRPART MEMORY INT_SRAM START_ADDR 0x0
|
|
|
|
|
|
|
|
|
|
|
|
; ***** INTERRUPT VECTORS ************************************************
|
|
.equ INT0addr = 0x0001 ; External Interrupt 0
|
|
.equ PCI0addr = 0x0002 ; External Interrupt Request 0
|
|
.equ OVF0addr = 0x0003 ; Timer/Counter0 Overflow
|
|
.equ ERDYaddr = 0x0004 ; EEPROM Ready
|
|
.equ ACIaddr = 0x0005 ; Analog Comparator
|
|
|
|
.equ INT_VECTORS_SIZE = 6 ; size in words
|
|
|
|
#pragma AVRPART CORE INSTRUCTIONS_NOT_SUPPORTED break
|
|
|
|
#endif /* _TN12DEF_INC_ */
|
|
|
|
; ***** END OF FILE ******************************************************
|