kolibrios-gitea/kernel/branches/net/drivers/sis900.asm
hidnplayr fd138cc362 Replaced all 'equ' with '=' for network drivers, where possible.
git-svn-id: svn://kolibrios.org@2852 a494cfbc-eb01-0410-851d-a64ba20cac60
2012-07-09 11:31:56 +00:00

1323 lines
41 KiB
NASM

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2010. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; Ethernet driver for KolibriOS ;;
;; This is an adaptation of MenuetOS driver with minimal changes. ;;
;; Changes were made by CleverMouse. Original copyright follows. ;;
;; ;;
;; This driver is based on the SIS900 driver from ;;
;; the etherboot 5.0.6 project. The copyright statement is ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;; remaining parts Copyright 2004 Jason Delozier, ;;
;; cordata51@hotmail.com ;;
;; ;;
;; See file COPYING for details ;;
;; ;;
;; Updates: ;;
;; Revision Look up table and SIS635 Mac Address by Jarek Pelczar ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
format MS COFF
API_VERSION = 0x01000100
DRIVER_VERSION = 5
MAX_DEVICES = 16
DEBUG = 1
__DEBUG__ = 1
__DEBUG_LEVEL__ = 1
include 'proc32.inc'
include 'imports.inc'
include 'fdo.inc'
include 'netdrv.inc'
public START
public version
NUM_RX_DESC = 4 ;* Number of RX descriptors *
NUM_TX_DESC = 1 ;* Number of TX descriptors *
RX_BUFF_SZ = 1520 ;* Buffer size for each Rx buffer *
TX_BUFF_SZ = 1516 ;* Buffer size for each Tx buffer *
MAX_ETH_FRAME_SIZE = 1516
virtual at ebx
device:
ETH_DEVICE
.io_addr dd ?
.pci_bus db ?
.pci_dev db ?
.irq_line db ?
.cur_rx db ?
.cur_tx db ?
.last_tx db ?
.pci_revision db ?
.table_entries db ?
dw ? ; align 4
.special_func dd ?
.txd rd (4 * NUM_TX_DESC)
.rxd rd (4 * NUM_RX_DESC)
.size = $ - device
end virtual
macro ee_delay {
push eax
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
pop eax
}
section '.flat' code readable align 16
; Driver entry point - register our service when the driver is loading.
; TODO: add needed operations when unloading
START:
cmp dword [esp+4], 1
jne .exit
stdcall RegService, my_service, service_proc
ret 4
.exit:
xor eax, eax
ret 4
; Service procedure for the driver - handle all I/O requests for the driver.
; Currently handled requests are: SRV_GETVERSION = 0 and SRV_HOOK = 1.
service_proc:
; 1. Get parameter from the stack: [esp+4] is the first parameter,
; pointer to IOCTL structure.
mov edx, [esp+4] ; edx -> IOCTL
; 2. Get request code and select a handler for the code.
mov eax, [IOCTL.io_code]
test eax, eax ; check for SRV_GETVERSION
jnz @f
; 3. This is SRV_GETVERSION request, no input, 4 bytes output, API_VERSION.
; 3a. Output size must be at least 4 bytes.
cmp [IOCTL.out_size], 4
jl .fail
; 3b. Write result to the output buffer.
mov eax, [IOCTL.output]
mov [eax], dword API_VERSION
; 3c. Return success.
xor eax, eax
ret 4
@@:
dec eax ; check for SRV_HOOK
jnz .fail
; 4. This is SRV_HOOK request, input defines the device to hook, no output.
; 4a. The driver works only with PCI devices,
; so input must be at least 3 bytes long.
cmp [IOCTL.inp_size], 3
jl .fail
; 4b. First byte of input is bus type, 1 stands for PCI.
mov eax, [IOCTL.input]
cmp byte [eax], 1
jne .fail
; 4c. Second and third bytes of the input define the device: bus and dev.
; Word in bx holds both bytes.
mov bx, [eax+1]
; 4d. Check if the device was already hooked,
; scan through the list of known devices.
; check if the device is already listed
mov esi, device_list
mov ecx, [devices]
test ecx, ecx
jz .firstdevice
; mov eax, [IOCTL.input] ; get the pci bus and device numbers
mov ax , [eax+1] ;
.nextdevice:
mov ebx, [esi]
cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte)
je .find_devicenum ; Device is already loaded, let's find it's device number
add esi, 4
loop .nextdevice
; 4e. This device doesn't have its own eth_device structure yet, let's create one
.firstdevice:
; 4f. Check that we have place for new device.
cmp [devices], MAX_DEVICES
jge .fail
; 4g. Allocate memory for device descriptor and receive+transmit buffers.
stdcall KernelAlloc, device.size
test eax, eax
jz .fail
; 4h. Zero the structure.
mov edi, eax
mov ecx, (device.size + 3) shr 2
xor eax, eax
rep stosd
; 4i. Save PCI coordinates
mov eax, [IOCTL.input]
mov cl , [eax+1]
mov [device.pci_bus], cl
mov cl , [eax+2]
mov [device.pci_dev], cl
; 4j. Fill in the direct call addresses into the struct.
; Note that get_MAC pointer is filled in initialization by probe.
mov [device.reset], init
mov [device.transmit], transmit
; mov [device.get_MAC], read_mac
mov [device.set_MAC], write_mac
mov [device.unload], unload
mov [device.name], my_service
; 4k. Now, it's time to find the base io addres of the PCI device
; TODO: implement check if bus and dev exist on this machine
; Now, it's time to find the base io addres of the PCI device
find_io [device.pci_bus], [device.pci_dev], [device.io_addr]
; We've found the io address, find IRQ now
find_irq [device.pci_bus], [device.pci_dev], [device.irq_line]
; 4m. Add new device to the list (required for int_handler).
mov eax, [devices]
mov [device_list+4*eax], ebx
inc [devices]
; 4m. Ok, the eth_device structure is ready, let's probe the device
call probe
test eax, eax
jnz .destroy
; 4n. If device was successfully initialized, register it for the kernel.
mov [device.type], NET_TYPE_ETH
call NetRegDev
cmp eax, -1
je .destroy
ret 4
; 5. If the device was already loaded, find the device number and return it in eax
.find_devicenum:
call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx
; into a device number in edi
mov eax, edi ; Application wants it in eax instead
ret 4
; If an error occured, remove all allocated data and exit (returning -1 in eax)
.destroy:
dec [devices]
; todo: reset device into virgin state
.err:
stdcall KernelFree, ebx
.fail:
xor eax, eax
ret 4
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
;; ;;
;; Actual Hardware dependent code starts here ;;
;; ;;
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
unload:
; TODO: (in this particular order)
;
; - Stop the device
; - Detach int handler
; - Remove device from local list
; - call unregister function in kernel
; - Remove all allocated structures and buffers the card used
or eax,-1
ret
;********************************************************************
; Comments:
; Known to work with the following SIS900 ethernet cards:
; - Device ID: 0x0900 Vendor ID: 0x1039 Revision: 0x91
; - Device ID: 0x0900 Vendor ID: 0x1039 Revision: 0x90
;
; If your card is not listed, try it and let me know if it
; functions properly and it will be aded to the list. If not
; we may be able to add support for it.
;
; ToDo:
; - Enable MII interface for reading speed
; and duplex settings.
; - Update receive routine to support packet fragmentation.
; - Add additional support for other sis900 based cards
;
;********************************************************************
ETH_ALEN = 6 ; Size of Ethernet address
ETH_HLEN = 14 ; Size of ethernet header
ETH_ZLEN = 60 ; Minimum packet length
DSIZE = 0x00000fff
CRC_SIZE = 4
RFADDR_shift = 16
; Symbolic offsets to registers.
cr = 0x0 ; Command Register
cfg = 0x4 ; Configuration Register
mear = 0x8 ; EEPROM Access Register
ptscr = 0xc ; PCI Test Control Register
isr = 0x10 ; Interrupt Status Register
imr = 0x14 ; Interrupt Mask Register
ier = 0x18 ; Interrupt Enable Register
epar = 0x18 ; Enhanced PHY Access Register
txdp = 0x20 ; Transmit Descriptor Pointer Register
txcfg = 0x24 ; Transmit Configuration Register
rxdp = 0x30 ; Receive Descriptor Pointer Register
rxcfg = 0x34 ; Receive Configuration Register
flctrl = 0x38 ; Flow Control Register
rxlen = 0x3c ; Receive Packet Length Register
rfcr = 0x48 ; Receive Filter Control Register
rfdr = 0x4C ; Receive Filter Data Register
pmctrl = 0xB0 ; Power Management Control Register
pmer = 0xB4 ; Power Management Wake-up Event Register
; Command Register Bits
RELOAD = 0x00000400
ACCESSMODE = 0x00000200
RESET = 0x00000100
SWI = 0x00000080
RxRESET = 0x00000020
TxRESET = 0x00000010
RxDIS = 0x00000008
RxENA = 0x00000004
TxDIS = 0x00000002
TxENA = 0x00000001
; Configuration Register Bits
DESCRFMT = 0x00000100 ; 7016 specific
REQALG = 0x00000080
SB = 0x00000040
POW = 0x00000020
EXD = 0x00000010
PESEL = 0x00000008
LPM = 0x00000004
BEM = 0x00000001
RND_CNT = 0x00000400
FAIR_BACKOFF = 0x00000200
EDB_MASTER_EN = 0x00002000
; Eeprom Access Reigster Bits
MDC = 0x00000040
MDDIR = 0x00000020
MDIO = 0x00000010 ; 7016 specific
EECS = 0x00000008
EECLK = 0x00000004
EEDO = 0x00000002
EEDI = 0x00000001
; TX Configuration Register Bits
ATP = 0x10000000 ;Automatic Transmit Padding
MLB = 0x20000000 ;Mac Loopback Enable
HBI = 0x40000000 ;HeartBeat Ignore (Req for full-dup)
CSI = 0x80000000 ;CarrierSenseIgnore (Req for full-du
; RX Configuration Register Bits
AJAB = 0x08000000 ;
ATX = 0x10000000 ;Accept Transmit Packets
ARP = 0x40000000 ;accept runt packets (<64bytes)
AEP = 0x80000000 ;accept error packets
; Interrupt Reigster Bits
WKEVT = 0x10000000
TxPAUSEEND = 0x08000000
TxPAUSE = 0x04000000
TxRCMP = 0x02000000
RxRCMP = 0x01000000
DPERR = 0x00800000
SSERR = 0x00400000
RMABT = 0x00200000
RTABT = 0x00100000
RxSOVR = 0x00010000
HIBERR = 0x00008000
SWINT = 0x00001000
MIBINT = 0x00000800
TxURN = 0x00000400
TxIDLE = 0x00000200
TxERR = 0x00000100
TxDESC = 0x00000080
TxOK = 0x00000040
RxORN = 0x00000020
RxIDLE = 0x00000010
RxEARLY = 0x00000008
RxERR = 0x00000004
RxDESC = 0x00000002
RxOK = 0x00000001
; Interrupt Enable Register Bits
IE = RxOK + TxOK
; Revision ID
SIS900B_900_REV = 0x03
SIS630A_900_REV = 0x80
SIS630E_900_REV = 0x81
SIS630S_900_REV = 0x82
SIS630EA1_900_REV = 0x83
SIS630ET_900_REV = 0x84
SIS635A_900_REV = 0x90
SIS900_960_REV = 0x91
; Receive Filter Control Register Bits
RFEN = 0x80000000
RFAAB = 0x40000000
RFAAM = 0x20000000
RFAAP = 0x10000000
RFPromiscuous = 0x70000000
; Reveive Filter Data Mask
RFDAT = 0x0000FFFF
; Eeprom Address
EEPROMSignature = 0x00
EEPROMVendorID = 0x02
EEPROMDeviceID = 0x03
EEPROMMACAddr = 0x08
EEPROMChecksum = 0x0b
;The EEPROM commands include the alway-set leading bit.
EEread = 0x0180
EEwrite = 0x0140
EEerase = 0x01C0
EEwriteEnable = 0x0130
EEwriteDisable = 0x0100
EEeraseAll = 0x0120
EEwriteAll = 0x0110
EEaddrMask = 0x013F
EEcmdShift = 16
;For SiS962 or SiS963, request the eeprom software access
EEREQ = 0x00000400
EEDONE = 0x00000200
EEGNT = 0x00000100
;***************************************************************************
;
; probe
;
; Searches for an ethernet card, enables it and clears the rx buffer
;
; TODO: probe mii transceivers
;
;***************************************************************************
align 4
probe:
movzx eax, [device.pci_bus]
movzx edx, [device.pci_dev]
stdcall PciWrite8, eax, edx, 0x40, 0 ; Wake Up Chip
make_bus_master [device.pci_bus], [device.pci_dev]
; Get Card Revision
movzx eax, [device.pci_bus]
movzx edx, [device.pci_dev]
stdcall PciRead8, eax, edx, 0x08
mov [device.pci_revision], al ; save the revision for later use
; Look up through the specific_table
mov esi, specific_table
.loop:
cmp dword [esi], 0 ; Check if we reached end of the list
je .error
cmp al, [esi] ; Check if revision is OK
je .ok
add esi, 12 ; Advance to next entry
jmp .loop
.error:
DEBUGF 1, "Device not supported!\n"
or eax, -1
ret
; Find Get Mac Function
.ok:
mov eax, [esi+4] ; Get pointer to "get MAC" function
mov [device.get_MAC], eax
mov eax, [esi+8] ; Get pointer to special initialization fn
mov [device.special_func], eax
; Get MAC
call [device.get_MAC]
; Call special initialization fn if requested
cmp [device.special_func],0
je @f
call [device.special_func]
@@:
; Set table entries
mov [device.table_entries], 16
cmp [device.pci_revision], SIS635A_900_REV
jae @f
cmp [device.pci_revision], SIS900B_900_REV
je @f
mov [device.table_entries], 8
@@:
; TODO: Probe for mii transceiver
;***************************************************************************
;
; init
;
; resets the ethernet controller chip and various
; data structures required for sending and receiving packets.
;
;***************************************************************************
align 4
init:
call reset
call init_rxfilter
call init_txd
call init_rxd
call set_rx_mode
call set_tx_mode
;call check_mode
; enable interrupts on packet receive
xor eax, eax
inc eax ; eax = 1 = RxOK
set_io 0
set_io imr
out dx, eax
; globally enable interrupts
set_io ier
out dx, eax ; eax is still 1
xor eax, eax
mov [device.mtu], 1514
ret
;***************************************************************************
;
; reset
;
; disables interrupts and soft resets the controller chip
;
;***************************************************************************
align 4
reset:
movzx eax, [device.irq_line]
stdcall AttachIntHandler, eax, int_handler, 0
;--------------------------------------------
; Disable Interrupts and reset Receive Filter
set_io 0
set_io ier
xor eax, eax
out dx, eax
set_io imr
out dx, eax
set_io rfcr
out dx, eax
;-----------
; Reset Card
set_io cr
in eax, dx ; Get current Command Register
or eax, RESET + RxRESET + TxRESET ; set flags
out dx, eax ; Write new Command Register
;----------
; Wait loop
set_io isr
mov ecx, 1000
.loop:
dec ecx
jz .error
in eax, dx ; move interrup status to eax
cmp eax, 0x03000000
jne .loop
;------------------------------------------------------
; Set Configuration Register depending on Card Revision
set_io cfg
mov eax, PESEL ; Configuration Register Bit
cmp [device.pci_revision], SIS635A_900_REV
je .match
cmp [device.pci_revision], SIS900B_900_REV ; Check card revision
je .match
out dx, eax ; no revision match
jmp .done
.match: ; Revision match
or eax, RND_CNT ; Configuration Register Bit
out dx, eax
.done:
xor eax, eax
ret
.error:
DEBUGF 1, "Reset failed!\n"
or eax, -1
ret
;***************************************************************************
;
; sis_init_rxfilter
;
; sets receive filter address to our MAC address
;
;***************************************************************************
align 4
init_rxfilter:
;------------------------------------
; Get Receive Filter Control Register
set_io 0
set_io rfcr
in eax, dx
push eax
;-----------------------------------------------
; disable packet filtering before setting filter
and eax, not RFEN
out dx, eax
;--------------------------------------
; load MAC addr to filter data register
xor ecx, ecx
RXINT_Mac_Write: ; high word of eax tells card which mac byte to write
mov eax, ecx
set_io 0
set_io rfcr
shl eax, 16 ;
out dx, eax ;
set_io rfdr
mov ax, word [device.mac+ecx*2] ; Get Mac ID word
out dx, ax ; Send Mac ID
inc cl ; send next word
cmp cl, 3 ; more to send?
jne RXINT_Mac_Write
;------------------------
; enable packet filtering
pop eax ;old register value
set_io rfcr
or eax, RFEN ;enable filtering
out dx, eax ;set register
ret
;***************************************************************************
;
; init_txd
;
; initializes the Tx descriptor
;
;***************************************************************************
align 4
init_txd:
;-------------------------
; initialize TX descriptor
mov dword [device.txd], 0 ; put link to next descriptor in link field
mov dword [device.txd+4], 0 ; clear status field
mov dword [device.txd+8], 0 ; ptr to buffer
;----------------------------------
; load Transmit Descriptor Register
set_io 0
set_io txdp ; TX Descriptor Pointer
lea eax, [device.txd]
GetRealAddr
out dx, eax ; move the pointer
ret
;***************************************************************************
;
; init_rxd
;
; initializes the Rx descriptor ring
;
;***************************************************************************
align 4
init_rxd:
; init RX descriptors
mov ecx, NUM_RX_DESC
lea esi, [device.rxd]
.loop:
lea eax, [esi + 16]
GetRealAddr
mov dword [esi+0], eax
mov dword [esi+4], RX_BUFF_SZ
stdcall KernelAlloc, RX_BUFF_SZ
test eax, eax
jz .fail
mov dword [esi+12], eax
GetRealAddr
mov dword [esi+8], eax
add esi, 16
loop .loop
lea eax, [device.rxd]
GetRealAddr
mov dword [esi - 16], eax ; correct last descriptor link ptr
; And output ptr to first desc, to device
set_io 0
set_io rxdp
out dx, eax
mov [device.cur_rx], 0 ; Set curent rx discriptor to 0
.fail: ;;; TODO: abort instead!
ret
;***************************************************************************
;
; set_tx_mode
;
; sets the transmit mode to allow for full duplex
;
; If you are having problems transmitting packet try changing the
; Max DMA Burst, Possible settings are as follows:
;
; 0x00000000 = 512 bytes
; 0x00100000 = 4 bytes
; 0x00200000 = 8 bytes
; 0x00300000 = 16 bytes
; 0x00400000 = 32 bytes
; 0x00500000 = 64 bytes
; 0x00600000 = 128 bytes
; 0x00700000 = 256 bytes
;
;***************************************************************************
align 4
set_tx_mode:
set_io 0
set_io cr
in eax, dx ; Get current Command Register
or eax, TxENA ; Enable Receive
out dx, eax
set_io txcfg ; Transmit config Register offset
mov eax, ATP + HBI + CSI +0x00600120
; allow automatic padding
; allow heartbeat ignore
; allow carrier sense ignore
; Max DMA Burst (128 bytes)
; TX Fill Threshold
; TX Drain Threshold
out dx, eax
ret
;***************************************************************************
;
; set_rx_mode
;
; sets the receive mode to accept all broadcast packets and packets
; with our MAC address, and reject all multicast packets. Also allows
; full-duplex
;
; If you are having problems receiving packet try changing the
; Max DMA Burst, Possible settings are as follows:
;
; 0x00000000 = 512 bytes
; 0x00100000 = 4 bytes
; 0x00200000 = 8 bytes
; 0x00300000 = 16 bytes
; 0x00400000 = 32 bytes
; 0x00500000 = 64 bytes
; 0x00600000 = 128 bytes
; 0x00700000 = 256 bytes
;
;***************************************************************************
align 4
set_rx_mode:
;----------------------------------------------
; update Multicast Hash Table in Receive Filter
xor cl, cl
.loop:
set_io 0
set_io rfcr ; Receive Filter Control Reg offset
mov eax, 4 ; determine table entry
add al, cl
shl eax, 16
out dx, eax ; tell card which entry to modify
set_io rfdr ; Receive Filter Control Reg offset
mov eax, 0xffff ; entry value
out dx, ax ; write value to table in card
inc cl ; next entry
cmp cl, [device.table_entries]
jl .loop
;------------------------------------
; Set Receive Filter Control Register
set_io rfcr ; Receive Filter Control Register offset
mov eax, RFAAB + RFAAM + RFAAP + RFEN
; accecpt all broadcast packets
; accept all multicast packets
; Accept all packets
; enable receiver filter
out dx, eax
;----------------
; Enable Receiver
set_io cr
in eax, dx ; Get current Command Register
or eax, RxENA ; Enable Receive
out dx, eax
;-------------------
; Configure Receiver
set_io rxcfg ; Receive Config Register offset
mov eax, ATX + 0x00600002
; Accept Transmit Packets
; (Req for full-duplex and PMD Loopback)
; Max DMA Burst
; RX Drain Threshold, 8X8 bytes or 64bytes
out dx, eax
ret
;***************************************************************************
;
; SIS960_get_mac_addr: - Get MAC address for SiS962 or SiS963 model
;
; SiS962 or SiS963 model, use EEPROM to store MAC address.
; EEPROM is shared by LAN and 1394.
; When access EEPROM, send EEREQ signal to hardware first, and wait for EEGNT.
; If EEGNT is ON, EEPROM is permitted to be accessed by LAN, otherwise is not.
; After MAC address is read from EEPROM, send
; EEDONE signal to refuse EEPROM access by LAN.
; The EEPROM map of SiS962 or SiS963 is different to SiS900.
; The signature field in SiS962 or SiS963 spec is meaningless.
;
; Return 0 is EAX = failure
;
;***************************************************************************
align 4
SIS960_get_mac_addr:
;-------------------------------
; Send Request for eeprom access
set_io 0
set_io mear ; Eeprom access register
mov eax, EEREQ ; Request access to eeprom
out dx, eax ; Send request
;-----------------------------------------------------
; Loop 4000 times and if access not granted, error out
mov ecx, 4000
.loop:
in eax, dx ; get eeprom status
test eax, EEGNT ; see if eeprom access granted flag is set
jnz .got_access ; if it is, go access the eeprom
loop .loop ; else keep waiting
DEBUGF 1, "Access to EEprom failed!\n", 0
set_io mear ; Eeprom access register
mov eax, EEDONE ; tell eeprom we are done
out dx, eax
or eax, -1 ; error
ret
.got_access:
;------------------------------------------
; EEprom access granted, read MAC from card
; zero based so 3-16 bit reads will take place
mov ecx, 2
.read_loop:
mov eax, EEPROMMACAddr ; Base Mac Address
add eax, ecx ; Current Mac Byte Offset
push ecx
call read_eeprom ; try to read 16 bits
pop ecx
mov word [device.mac+ecx*2], ax ; save 16 bits to the MAC ID varible
dec ecx ; one less word to read
jns .read_loop ; if more read more
mov eax, 1 ; return non-zero indicating success
DEBUGF 2,"%x-%x-%x-%x-%x-%x\n",[device.mac]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2
;-------------------------------------
; Tell EEPROM We are Done Accessing It
.done:
set_io 0
set_io mear ; Eeprom access register
mov eax, EEDONE ; tell eeprom we are done
out dx, eax
xor eax, eax ; ok
ret
;***************************************************************************
;
; get_mac_addr: - Get MAC address for stand alone SiS900 model
;
; Older SiS900 and friends, use EEPROM to store MAC address.
;
;***************************************************************************
align 4
SIS900_get_mac_addr:
;------------------------------------
; check to see if we have sane EEPROM
mov eax, EEPROMSignature ; Base Eeprom Signature
call read_eeprom ; try to read 16 bits
cmp ax, 0xffff
je .err
test ax, ax
je .err
;-----------
; Read MacID
; zero based so 3-16 bit reads will take place
mov ecx, 2
.loop:
mov eax, EEPROMMACAddr ; Base Mac Address
add eax, ecx ; Current Mac Byte Offset
push ecx
call read_eeprom ; try to read 16 bits
pop ecx
mov word [device.mac+ecx*2], ax ; save 16 bits to the MAC ID storage
dec ecx ; one less word to read
jns .loop ; if more read more
DEBUGF 2,"%x-%x-%x-%x-%x-%x\n",[device.mac]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2
xor eax, eax
ret
.err:
DEBUGF 1, "Access to EEprom failed!\n", 0
or eax, -1
ret
;***************************************************************************
;
; Get_Mac_SIS635_900_REV: - Get MAC address for model 635
;
;***************************************************************************
align 4
Get_Mac_SIS635_900_REV:
set_io 0
set_io rfcr
in eax, dx
mov edi, eax ; EDI=rfcrSave
set_io cr
or eax, RELOAD
out dx, eax
xor eax, eax
out dx, eax
;-----------------------------------------------
; Disable packet filtering before setting filter
set_io rfcr
mov eax, edi
and edi, not RFEN
out dx, eax
;---------------------------------
; Load MAC to filter data register
mov ecx, 3
lea edi, [device.mac]
.loop:
set_io 0
set_io rfcr
mov eax, ecx
shl eax, RFADDR_shift
out dx, eax
set_io rfdr
in eax, dx
stosw
loop .loop
;------------------------
; Enable packet filtering
; set_io rfcr
; mov eax, edi
; or eax, RFEN
; out dx, eax
xor eax, eax
ret
;***************************************************************************
;
; read_eeprom
;
; reads and returns a given location from EEPROM
;
; IN: si = addr
; OUT: ax = data
;
;***************************************************************************
align 4
read_eeprom:
set_io 0
set_io mear
xor eax, eax ; start send
out dx, eax
ee_delay
or eax, EECLK
out dx, eax
ee_delay
;------------------------------------
; Send the read command
or esi, EEread
mov ecx, 1 shl 9
.loop:
mov eax, EECS
test esi, ecx
jz @f
or eax, EEDI
@@:
out dx, eax
ee_delay
or eax, EECLK
out dx, eax
ee_delay
shr esi, 1
jnc .loop
mov eax, EECS
out dx, eax
ee_delay
;------------------------
; Read 16-bits of data in
xor esi, esi
mov cx, 16
.loop2:
mov eax, EECS
out dx, eax
ee_delay
or eax, EECLK
out dx, eax
ee_delay
in eax, dx
shl esi, 1
test eax, EEDO
jz @f
inc esi
@@:
loop .loop2
;----------------------------
; Terminate the EEPROM access
xor eax, eax
out dx, eax
ee_delay
mov eax, EECLK
out dx, eax
ee_delay
movzx eax, si
ret
align 4
write_mac:
DEBUGF 1,'Setting MAC is not supported for SIS900 card.\n'
add esp, 6
ret
;***************************************************************************
;
; int_handler
;
; handles received IRQs, which signal received packets
;
; Currently only supports one descriptor per packet, if packet is fragmented
; between multiple descriptors you will lose part of the packet
;
;***************************************************************************
align 4
int_handler:
; find pointer of device which made IRQ occur
mov esi, device_list
mov ecx, [devices]
test ecx, ecx
jz .nothing
.nextdevice:
mov ebx, [esi]
set_io 0
set_io isr
in eax, dx ; note that this clears all interrupts
test ax, IE
jnz .got_it
loop .nextdevice
.nothing:
ret
.got_it:
test ax, RxOK
jz .no_rx
push ax
;-----------
; Get Status
movzx eax, [device.cur_rx] ; find current discriptor
shl eax, 4 ; * 16
mov ecx, dword[device.rxd+eax+4] ; get receive status
;-------------------------------------------
; Check RX_Status to see if packet is waiting
test ecx, 0x80000000
jnz .is_packet
ret
;----------------------------------------------
; There is a packet waiting check it for errors
.is_packet:
test ecx, 0x67C0000 ; see if there are any errors
jnz .error_status
;---------------------
; Check size of packet
and ecx, DSIZE ; get packet size minus CRC
sub ecx, CRC_SIZE ; make sure packet contains data
jle .error_size
; update statistics
inc dword [device.packets_rx]
add dword [device.bytes_rx], ecx
adc dword [device.bytes_rx+4], 0
push ebx
push .return
push ecx ; packet size
push [device.rxd+eax+12] ; packet ptr
DEBUGF 1, "Packet received OK\n"
jmp EthReceiver
.return:
pop ebx
; Reset status, allow ethernet card access to descriptor
movzx ecx, [device.cur_rx]
shl ecx, 4 ; *16
mov ecx, [device.rxd+ecx]
stdcall KernelAlloc, RX_BUFF_SZ
test eax, eax
jz .fail
mov dword [ecx+12], eax
GetRealAddr
mov dword [ecx+8], eax
mov dword [ecx+4], RX_BUFF_SZ
inc [device.cur_rx] ; get next descriptor
and [device.cur_rx], NUM_RX_DESC-1 ; only 4 descriptors 0-3
; Enable Receiver
set_io 0
set_io cr ; Command Register offset
in eax, dx ; Get current Command Register
or eax, RxENA ; Enable Receiver
out dx, eax
pop ax
jmp .no_rx
.error_status:
DEBUGF 1, "Packet error: %x\n", ecx
jmp .fail
.error_size:
DEBUGF 1, "Packet too large/small\n"
jmp .fail
.no_rx:
;; test ax, TxOk
;; jz .no_tx
;;; TODO: free all unused buffers
;; stdcall KernelFree, eax
.no_tx:
ret
.fail:
DEBUGF 1, "FAILED\n"
jmp $
ret
;***************************************************************************
; Function
; transmit
; Description
; Transmits a packet of data via the ethernet card
; buffer pointer in [esp+4]
; size of buffer in [esp+8]
; pointer to device structure in ebx
;
; only one transmit descriptor is used
;
;***************************************************************************
align 4
transmit:
cmp dword [esp+8], MAX_ETH_FRAME_SIZE
ja .error
cmp dword [esp+8], 60
jb .error
movzx ecx, [device.cur_tx]
shl ecx, 4
mov ecx, [device.txd+ecx]
;; TODO: check if desc is empty (for example: check for eax, 0x6200000 at [ecx+4]
;;; or: count number of available descriptors
mov eax, [esp+4]
mov dword [ecx + 12], eax
GetRealAddr
mov dword [ecx + 8], eax
mov eax, [esp+8]
and eax, DSIZE
or eax, 0x80000000 ; card owns descriptor
mov dword [ecx + 4], eax
; update stats
inc [device.packets_tx]
add dword [device.bytes_tx], ecx
adc dword [device.bytes_tx+4], 0
.finish:
xor eax, eax
ret 8
.error:
stdcall KernelFree, [esp+4]
or eax, -1
ret 8
; End of code
align 4 ; Place all initialised data here
devices dd 0
specific_table:
; dd SIS630A_900_REV,Get_Mac_SIS630A_900_REV,0
; dd SIS630E_900_REV,Get_Mac_SIS630E_900_REV,0
dd SIS630S_900_REV,Get_Mac_SIS635_900_REV,0
dd SIS630EA1_900_REV,Get_Mac_SIS635_900_REV,0
dd SIS630ET_900_REV,Get_Mac_SIS635_900_REV,0;SIS630ET_900_REV_SpecialFN
dd SIS635A_900_REV,Get_Mac_SIS635_900_REV,0
dd SIS900_960_REV,SIS960_get_mac_addr,0
dd SIS900B_900_REV,SIS900_get_mac_addr,0
dd 0 ; end of list
version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF)
my_service db 'SIS900',0 ; max 16 chars include zero
include_debug_strings ; All data wich FDO uses will be included here
section '.data' data readable writable align 16; place all uninitialized data place here
device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling