kolibrios-gitea/kernel/branches/net/network/ethernet.inc
hidnplayr 8aee69dafb Replaced some of the 'magic numbers' in net branch with constants.
git-svn-id: svn://kolibrios.org@2301 a494cfbc-eb01-0410-851d-a64ba20cac60
2011-11-07 21:03:20 +00:00

246 lines
5.3 KiB
PHP

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2010. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; ETHERNET.INC ;;
;; ;;
;; Ethernet network layer for KolibriOS ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
struct ETH_FRAME
.DstMAC dp ? ; destination MAC-address
.SrcMAC dp ? ; source MAC-address
.Type dw ? ; type of the upper-layer protocol
.Data: ; data (46-1500 bytes for a normal packet)
ends
ETH_FRAME_MINIMUM equ 60
virtual at NET_DEVICE.end
ETH_DEVICE:
.set_mode dd ?
.get_mode dd ?
.set_MAC dd ?
.get_MAC dd ?
.mode dd ?
.mac dp ?
end virtual
align 4
iglobal
ETH_BROADCAST dp 0xffffffffffff
endg
;-----------------------------------------------------------------
;
; ETH_input
;
; This function is called by ethernet drivers,
; It pushes the received ethernet packets onto the eth_in_queue
;
; IN: [esp] = Pointer to buffer
; [esp+4] = size of buffer
; ebx = pointer to eth_device
; OUT: /
;
;-----------------------------------------------------------------
align 4
ETH_input:
mov eax, [esp]
mov ecx, [esp+4]
DEBUGF 1,"ETH_input - size: %u\n", ecx
cmp ecx, ETH_FRAME_MINIMUM
jb .dump
sub ecx, ETH_FRAME.Data
lea edx, [eax + ETH_FRAME.Data]
mov ax , [eax + ETH_FRAME.Type]
cmp ax, ETHER_IPv4
je IPv4_input
cmp ax, ETHER_ARP
je ARP_input
; cmp ax, ETHER_PPP_DISCOVERY
; je PPPOE_discovery
DEBUGF 2,"Unknown ethernet packet type %x\n", ax
.dump:
DEBUGF 2,"ETH_input - dumping\n"
call kernel_free
add esp, 4
ret
;-----------------------------------------------------------------
;
; ETH_output
;
; IN: eax = pointer to source mac
; ebx = device ptr
; ecx = packet size
; edx = pointer to destination mac
; di = protocol
;
; OUT: edi = 0 on error, pointer to buffer otherwise
; eax = buffer start
; ebx = to device structure
; ecx = unchanged (packet size of embedded data)
; edx = size of complete buffer
;
;-----------------------------------------------------------------
align 4
ETH_output:
DEBUGF 1,"ETH_output: size=%u device:%x\n", ecx, ebx
cmp ecx, [ebx + NET_DEVICE.mtu]
ja .exit
push ecx ; << 1
push di eax edx ; << 2
add ecx, ETH_FRAME.Data
push ecx ; << 3
push ecx ; << 4
call kernel_alloc ; >> 4
test eax, eax
jz .out_of_ram
mov edi, eax
pop ecx ; >> 3
pop esi ; >> 2
movsd
movsw
pop esi ; >> 2
movsd
movsw
pop ax ; >> 2
stosw
lea eax, [edi - ETH_FRAME.Data] ; Set eax to buffer start
mov edx, ecx ; Set edx to complete buffer size
pop ecx ; >> 1
cmp edx, ETH_FRAME_MINIMUM
jb .adjust_size
DEBUGF 1,"ETH_output: done: %x total size: %u\n", eax, edx
ret
.adjust_size:
mov edx, ETH_FRAME_MINIMUM
test edx, edx ; clear zero flag
ret
.out_of_ram:
DEBUGF 2,"ETH_output: Out of ram space!!\n"
add esp, 3*4+2+4
sub edi, edi
ret
.exit:
DEBUGF 2,"ETH_output: Packet too large!\n"
sub edi, edi
;;; dec edi
ret
;-----------------------------------------------------------------
;
; ETH_API
;
; This function is called by system function 75
;
; IN: subfunction number in bl
; device number in bh
; ecx, edx, .. depends on subfunction
;
; OUT:
;
;-----------------------------------------------------------------
align 4
ETH_API:
cmp bh, MAX_NET_DEVICES
ja .error
movzx eax, bh
shl eax, 2
mov eax, dword [NET_DRV_LIST + eax]
cmp [eax + NET_DEVICE.type], NET_TYPE_ETH
jne .error
test bl, bl
jz .packets_tx ; 0
dec bl
jz .packets_rx ; 1
dec bl
jz .bytes_tx ; 2
dec bl
jz .bytes_rx ; 3
dec bl
jz .read_mac ; 4
dec bl
jz .write_mac ; 5
.error:
DEBUGF 2,"Device is not ethernet type\n"
or eax, -1
ret
.packets_tx:
mov eax, dword [eax + NET_DEVICE.packets_tx]
ret
.packets_rx:
mov eax, dword [eax + NET_DEVICE.packets_rx]
ret
.bytes_tx:
mov ebx, dword [eax + NET_DEVICE.bytes_tx + 4]
mov eax, dword [eax + NET_DEVICE.bytes_tx]
mov [esp+20+4], ebx ; TODO: fix this ugly code
ret
.bytes_rx:
mov ebx, dword [eax + NET_DEVICE.bytes_rx + 4]
mov eax, dword [eax + NET_DEVICE.bytes_rx]
mov [esp+20+4], ebx ; TODO: fix this ugly code
ret
.read_mac:
movzx ebx, word [eax + ETH_DEVICE.mac]
mov eax, dword [eax + ETH_DEVICE.mac + 2]
mov [esp+20+4], ebx ; TODO: fix this ugly code
ret
.write_mac:
push ecx
push dx
call [eax + ETH_DEVICE.set_MAC]
ret