kolibrios-gitea/kernel/branches/net/network/stack.inc
hidnplayr 602924a5b5 compile netcfg on unix
fixed bug in netcfg created in last revision
netcfg gives error msg when driver is not loaded
zeroconfig now works with latest version of libini
also fixed use of static and link-local ip in zeroconfig
initial IPv4 variables are now 0.0.0.0 instead of 255.255.255.255
created kernel function that shows number of active network devices 
fixed the use of temp mac variable in IPV4.inc (variable is now in stack)
rewrite of ARP code, needs full testing/debugging (new application needed: ARP manager)
port numbers are now in INET byte order, as is in posix standards

git-svn-id: svn://kolibrios.org@1196 a494cfbc-eb01-0410-851d-a64ba20cac60
2009-10-05 20:47:27 +00:00

306 lines
6.5 KiB
PHP

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2009. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; STACK.INC ;;
;; ;;
;; BASIC TCP/IP stack for KolibriOS ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; based on the work of Mike Hibbett, mikeh@oceanfree.net ;;
;; but also Paolo Franchetti ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision: 983 $
uglobal
last_1sTick db ?
last_1hsTick dd ?
endg
MAX_NET_DEVICES equ 16
MIN_EPHEMERAL_PORT equ 49152
MAX_EPHEMERAL_PORT equ 61000
ETHER equ 1337
ETHER_ARP equ 0x0608
;AF_UNSPEC equ 0
;AF_UNIX equ 1
AF_INET4 equ 2
;AF_AX25 equ 3
;AF_IPX equ 4
;AF_APPLETALK equ 5
;AF_NETROM equ 6
;AF_BRIDGE equ 7
;AF_AAL5 equ 8
;AF_X25 equ 9
;AF_INET6 equ 10
;AF_MAX equ 12
IP_PROTO_IP equ 0
IP_PROTO_ICMP equ 1
IP_PROTO_TCP equ 6
IP_PROTO_UDP equ 17
; TCP opening modes
SOCKET_PASSIVE equ 0
SOCKET_ACTIVE equ 1
include "queue.inc"
include "ARP.inc"
include "IPv4.inc"
include "ethernet.inc"
include "socket.inc"
;include "tcp.inc"
include "udp.inc"
include "icmp.inc"
;-----------------------------------------------
;
; stack_init
;
; This function calls all network init procedures
;
; IN: /
; OUT: /
;
;-----------------------------------------------
align 4
stack_init:
call ETH_init
call IPv4_init
call ARP_init
call UDP_init
call ICMP_init
call socket_init
mov al, 0x0 ; set up 1s timer
out 0x70, al
in al, 0x71
mov [last_1sTick], al
ret
;-----------------------------------------------
;
; stack_handler
;
; This function calls all network init procedures
;
; IN: /
; OUT: /
;
;-----------------------------------------------
align 4
stack_handler:
cmp [ETH_RUNNING], 0
je .exit
call ETH_handler ; handle all queued ethernet packets
call ETH_send_queued
; Test for 10ms tick, call tcp timer
mov eax, [timer_ticks]
cmp eax, [last_1hsTick]
je .exit
mov [last_1hsTick], eax
; call tcp_tx_handler
.sec_tick:
; Test for 1 second event, call 1s timer functions
mov al, 0x0 ;second
out 0x70, al
in al, 0x71
cmp al, [last_1sTick]
je .exit
mov [last_1sTick], al
call ARP_decrease_entry_ttls
call IPv4_decrease_fragment_ttls
; call tcp_tcb_handler
.exit:
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Checksum [by Johnny_B]
;; IN:
;; buf_ptr=POINTER to buffer
;; buf_size=SIZE of buffer
;; OUT:
;; AX=16-bit checksum
;; Saves all used registers
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc checksum_jb stdcall uses ebx esi ecx,\
buf_ptr:DWORD, buf_size:DWORD
xor eax, eax
xor ebx, ebx ;accumulator
mov esi, dword[buf_ptr]
mov ecx, dword[buf_size]
shr ecx, 1 ; ecx=ecx/2
jnc @f ; if CF==0 then size is even number
mov bh, byte[esi + ecx*2]
@@:
cld
.loop:
lodsw ;eax=word[esi],esi=esi+2
xchg ah,al ;cause must be a net byte-order
add ebx, eax
loop .loop
mov eax, ebx
shr eax, 16
add ax, bx
not ax
ret
endp
;----------------------------------------------------------------
;
; System function to work with network devices (73)
;
;----------------------------------------------------------------
align 4
sys_network:
cmp ebx, -1
jne @f
mov eax, [ETH_RUNNING]
jmp .return
@@:
cmp bh, MAX_NET_DEVICES ; Check if device number exists
jge .doesnt_exist
mov esi, ebx
and esi, 0x0000ff00
shr esi, 6
cmp dword [esi + ETH_DRV_LIST], 0 ; check if driver is running
je .doesnt_exist
test bl, bl ; 0 = Get device type (ethernet/token ring/...)
jnz @f
; todo
xor eax, eax
jmp .return
@@:
dec bl ; 1 = Get device name
jnz @f
mov esi, [esi + ETH_DRV_LIST]
mov esi, [esi + ETH_DEVICE.name]
mov edi, ecx
mov ecx, 64 ; max length
repnz movsb
xor eax, eax
jmp .return
@@:
dec bl ; 2 = Reset the device
jnz @f
mov esi, [esi + ETH_DRV_LIST]
call [esi + ETH_DEVICE.reset]
jmp .return
@@:
dec bl ; 3 = Stop driver for this device
jnz @f
mov esi, [esi + ETH_DRV_LIST]
call [esi + ETH_DEVICE.unload]
jmp .return
@@:
.doesnt_exist:
DEBUGF 1,"sys_network: invalid device/function specified!\n"
mov eax, -1
.return:
mov [esp+28+4], eax
ret
;----------------------------------------------------------------
;
; System Function To work with Protocols (75)
;
;----------------------------------------------------------------
align 4
sys_protocols:
cmp bh, MAX_NET_DEVICES ; Check if device number exists
jge .doesnt_exist
mov esi, ebx
and esi, 0x0000ff00
shr esi, 6
cmp dword [esi + ETH_DRV_LIST], 0 ; check if driver is running TODO: check other lists too
je .doesnt_exist
push .return ; return address (we will be using jumps instead of calls)
mov eax, ebx ; set ax to protocol number
shr eax, 16 ;
cmp ax , IP_PROTO_IP
je IPv4_API
cmp ax , IP_PROTO_ICMP
je ICMP_API
cmp ax , IP_PROTO_UDP
je UDP_API
cmp ax , IP_PROTO_TCP
; je TCP_API
cmp ax , ETHER_ARP
je ARP_API
cmp ax , ETHER
je ETH_API
add esp, 4 ; if we reached here, no function was called, so we need to balance stack
.doesnt_exist:
DEBUGF 1,"sys_protocols: protocol %u doesnt exist on device %u!\n",ax, bh
mov eax, -1
.return:
mov [esp+28+4], eax
ret