kolibrios-gitea/kernel/branches/kolibri-process/network/IPv6.inc
Sergey Semyonov (Serge) ede303b245 an attempt to rework threading model
git-svn-id: svn://kolibrios.org@4429 a494cfbc-eb01-0410-851d-a64ba20cac60
2014-01-08 04:03:52 +00:00

299 lines
9.2 KiB
PHP

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2012-2013. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; IPv6.INC ;;
;; ;;
;; Part of the tcp/ip network stack for KolibriOS ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision: 3251 $
struct IPv6_header
VersionTrafficFlow dd ? ; Version[0-3], Traffic class[4-11], Flow Label [12-31]
PayloadLength dw ? ; 16 bits, unsigned length of payload (extension headers are part of this)
NextHeader db ? ; Values are same as in IPv4 'Protocol' field
HopLimit db ? ; Decremented by every node, packet is discarded when it reaches 0
SourceAddress rd 4 ; 128-bit addresses
DestinationAddress rd 4 ;
Payload rb 0
ends
uglobal
align 4
IPv6:
.addresses rd 4*NET_DEVICES_MAX
.subnet rd 4*NET_DEVICES_MAX
.dns rd 4*NET_DEVICES_MAX
.gateway rd 4*NET_DEVICES_MAX
.packets_tx rd NET_DEVICES_MAX
.packets_rx rd NET_DEVICES_MAX
endg
;-----------------------------------------------------------------
;
; IPv6_init
;
; This function resets all IP variables
;
;-----------------------------------------------------------------
macro IPv6_init {
xor eax, eax
mov edi, IPv6
mov ecx, (4*4*4+2*4)MAX_IP
rep stosd
}
;-----------------------------------------------------------------
;
; IPv6_input:
;
; Will check if IPv6 Packet isnt damaged
; and call appropriate handler. (TCP/UDP/ICMP/..)
;
; It will also re-construct fragmented packets
;
; IN: Pointer to buffer in [esp]
; size of buffer in [esp+4]
; pointer to device struct in ebx
; pointer to IPv6 header in edx
; size of IPv6 packet in ecx
; OUT: /
;
;-----------------------------------------------------------------
align 4
IPv6_input:
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input from: %x%x:%x%x:%x%x:%x%x:%x%x:%x%x:%x%x:%x%x\n",\
[edx + IPv6_header.SourceAddress + 0]:2,[edx + IPv6_header.SourceAddress + 1]:2,\
[edx + IPv6_header.SourceAddress + 2]:2,[edx + IPv6_header.SourceAddress + 3]:2,\
[edx + IPv6_header.SourceAddress + 4]:2,[edx + IPv6_header.SourceAddress + 5]:2,\
[edx + IPv6_header.SourceAddress + 6]:2,[edx + IPv6_header.SourceAddress + 7]:2,\
[edx + IPv6_header.SourceAddress + 8]:2,[edx + IPv6_header.SourceAddress + 9]:2,\
[edx + IPv6_header.SourceAddress + 10]:2,[edx + IPv6_header.SourceAddress + 11]:2,\
[edx + IPv6_header.SourceAddress + 12]:2,[edx + IPv6_header.SourceAddress + 13]:2,\
[edx + IPv6_header.SourceAddress + 14]:2,[edx + IPv6_header.SourceAddress + 15]:2
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input to: %x%x:%x%x:%x%x:%x%x:%x%x:%x%x:%x%x:%x%x\n",\
[edx + IPv6_header.DestinationAddress + 0]:2,[edx + IPv6_header.DestinationAddress + 1]:2,\
[edx + IPv6_header.DestinationAddress + 2]:2,[edx + IPv6_header.DestinationAddress + 3]:2,\
[edx + IPv6_header.DestinationAddress + 4]:2,[edx + IPv6_header.DestinationAddress + 5]:2,\
[edx + IPv6_header.DestinationAddress + 6]:2,[edx + IPv6_header.DestinationAddress + 7]:2,\
[edx + IPv6_header.DestinationAddress + 8]:2,[edx + IPv6_header.DestinationAddress + 9]:2,\
[edx + IPv6_header.DestinationAddress + 10]:2,[edx + IPv6_header.DestinationAddress + 11]:2,\
[edx + IPv6_header.DestinationAddress + 12]:2,[edx + IPv6_header.DestinationAddress + 13]:2,\
[edx + IPv6_header.DestinationAddress + 14]:2,[edx + IPv6_header.DestinationAddress + 15]:2
sub ecx, sizeof.IPv6_header
jb .dump
cmp cx, [edx + IPv6_header.PayloadLength]
jb .dump
;-------------------------------------------------------------------
; No, it's just a regular IP packet, pass it to the higher protocols
.handle_it:
movzx ecx, [edx + IPv6_header.PayloadLength]
lea edi, [edx + IPv6_header.SourceAddress] ; make edi ptr to source and dest IPv6 address
lea esi, [edx + IPv6_header.Payload] ; make esi ptr to data
mov al, [edx + IPv6_header.NextHeader]
.scan:
cmp al, 59 ; no next
je .dump
cmp al, 0
je .hop_by_hop
cmp al, 43
je .routing
cmp al, 44
je .fragment
cmp al, 60
je .dest_opts
; cmp al, IP_PROTO_TCP
; je TCP_input
; cmp al, IP_PROTO_UDP
; je UDP_input
; cmp al, 58
; je ICMP6_input
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input - unknown protocol: %u\n", al
.dump:
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input - dumping\n"
call kernel_free
add esp, 4
ret
.dump_options:
add esp, 2+4+4
jmp .dump
.nextheader:
pop esi
pop ecx
pop ax
jmp .scan
;-------------------------
; Hop-by-Hop
.hop_by_hop:
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input - hop by hop\n"
pushw [esi] ; 8 bit identifier for option type
movzx eax, byte[esi + 1] ; Hdr Ext Len
inc eax ; first 8 octets not counted
shl eax, 3 ; * 8
sub ecx, eax
push ecx
add eax, esi
push eax
inc esi
inc esi
mov al, [esi]
cmp al, 0
je .pad_1
cmp al, 1
je .pad_n
; TODO: check with other known options
; unknown option.. discard packet or not?
; check highest two bits
test al, 0xc0 ; discard packet
jnz .dump_options
.pad_n:
movzx eax, byte[esi + 1]
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input - pad %u\n", eax
inc esi
inc esi
add esi, eax
sub ecx, eax
jmp .hop_by_hop
.pad_1:
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input - pad 1\n"
inc esi
dec ecx
jmp .hop_by_hop
.dest_opts:
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input - dest opts\n"
jmp .nextheader
.routing:
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input - routing\n"
pushw [esi] ; 8 bit identifier for option type
movzx eax, byte[esi + 1] ; Hdr Ext Len
inc eax ; first 8 octets not counted
shl eax, 3 ; * 8
sub ecx, eax
push ecx
add eax, esi
push eax
inc esi
inc esi
cmp al, 0
je .pad_1
cmp al, 1
je .pad_n
mov al, [esi] ; routing type
jmp .nextheader
.fragment:
DEBUGF DEBUG_NETWORK_VERBOSE, "IPv6_input - fragment\n"
jmp .nextheader
;---------------------------------------------------------------------------
;
; IPv6_API
;
; This function is called by system function 75
;
; IN: subfunction number in bl
; device number in bh
; ecx, edx, .. depends on subfunction
;
; OUT:
;
;---------------------------------------------------------------------------
align 4
IPv6_api:
movzx eax, bh
shl eax, 2
and ebx, 0x000000ff
cmp ebx, .number
ja .error
jmp dword [.table + 4*ebx]
.table:
dd .packets_tx ; 0
dd .packets_rx ; 1
; dd .read_ip ; 2
; dd .write_ip ; 3
; dd .read_dns ; 4
; dd .write_dns ; 5
; dd .read_subnet ; 6
; dd .write_subnet ; 7
; dd .read_gateway ; 8
; dd .write_gateway ; 9
.number = ($ - .table) / 4 - 1
.error:
mov eax, -1
ret
.packets_tx:
mov eax, [IPv6.packets_tx + eax]
ret
.packets_rx:
mov eax, [IPv6.packets_rx + eax]
ret