kolibrios-gitea/kernel/branches/kolibri_pe/boot/bootcode.inc
Sergey Semyonov (Serge) 4637e1f6a3 splitting kernel into sections
git-svn-id: svn://kolibrios.org@851 a494cfbc-eb01-0410-851d-a64ba20cac60
2008-08-10 05:23:24 +00:00

807 lines
22 KiB
PHP
Raw Blame History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;;
;; Copyright (C) MenuetOS 2000-2004 Ville Mikael Turjanmaa ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; BOOTCODE.INC ;;
;; ;;
;; KolibriOS 16-bit loader, ;;
;; based on bootcode for MenuetOS ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
;==========================================================================
;
; 16 BIT FUNCTIONS
;
;==========================================================================
use16
putchar:
; in: al=character
mov ah, 0Eh
mov bh, 0
int 10h
ret
print:
; in: si->string
mov al, 186
call word putchar
mov al, ' '
call word putchar
printplain:
; in: si->string
pusha
lodsb
@@:
call putchar
lodsb
cmp al, 0
jnz @b
popa
ret
getkey:
; get number in range [bl,bh] (bl,bh in ['0'..'9'])
; in: bx=range
; out: ax=digit (1..9, 10 for 0)
mov ah, 0
int 16h
cmp al, bl
jb getkey
cmp al, bh
ja getkey
push ax
call putchar
pop ax
and ax, 0Fh
jnz @f
mov al, 10
@@:
ret
setcursor:
; in: dl=column, dh=row
mov ah, 2
mov bh, 0
int 10h
ret
macro _setcursor row,column
{
mov dx, row*256 + column
call setcursor
}
boot_read_floppy:
push si
xor si, si
mov ah, 2 ; read
@@:
push ax
int 0x13
pop ax
jnc @f
inc si
cmp si, 10
jb @b
mov si, badsect
sayerr_plain:
call printplain
jmp $
@@:
pop si
ret
; convert abs. sector number (AX) to BIOS T:H:S
; sector number = (abs.sector%BPB_SecPerTrk)+1
; pre.track number = (abs.sector/BPB_SecPerTrk)
; head number = pre.track number%BPB_NumHeads
; track number = pre.track number/BPB_NumHeads
; Return: cl - sector number
; ch - track number
; dl - drive number (0 = a:)
; dh - head number
conv_abs_to_THS:
push bx
mov bx,word [BPB_SecPerTrk]
xor dx,dx
div bx
inc dx
mov cl, dl ; cl = sector number
mov bx,word [BPB_NumHeads]
xor dx,dx
div bx
; !!!!!!! ax = track number, dx = head number
mov ch,al ; ch=track number
xchg dh,dl ; dh=head number
mov dl,0 ; dl=0 (drive 0 (a:))
pop bx
retn
sayerr:
call print
jmp $
; needed variables
BPB_SecPerTrk dw 0 ; sectors per track
BPB_NumHeads dw 0 ; number of heads
BPB_FATSz16 dw 0 ; size of FAT
BPB_RootEntCnt dw 0 ; count of root dir. entries
BPB_BytsPerSec dw 0 ; bytes per sector
BPB_RsvdSecCnt dw 0 ; number of reserved sectors
BPB_TotSec16 dw 0 ; count of the sectors on the volume
BPB_SecPerClus db 0 ; number of sectors per cluster
BPB_NumFATs db 0 ; number of FAT tables
abs_sector_adj dw 0 ; adjustment to make abs. sector number
end_of_FAT dw 0 ; end of FAT table
FirstDataSector dw 0 ; begin of data
;=========================================================================
;
; 16 BIT CODE
;
;=========================================================================
include 'bootvesa.inc' ;Include source for boot vesa
start_of_code:
cld
xor ecx, ecx
xor edx, edx
xor esi, esi
xor edi, edi
xor ebp, ebp
mov eax, 0x3000
mov ss, ax
mov esp, 0EC00h
mov ebx, 0x1000
mov ds, bx
mov es, bx
; set videomode
mov ax, 3
int 0x10
if lang eq ru
; Load & set russian VGA font (RU.INC)
mov bp, RU_FNT1 ; RU_FNT1 - First part
mov bx, 1000h ; 768 bytes
mov cx, 30h ; 48 symbols
mov dx, 80h ; 128 - position of first symbol
mov ax, 1100h
int 10h
mov bp, RU_FNT2 ; RU_FNT2 -Second part
mov bx, 1000h ; 512 bytes
mov cx, 20h ; 32 symbols
mov dx, 0E0h ; 224 - position of first symbol
mov ax, 1100h
int 10h
; End set VGA russian font
else if lang eq et
mov bp, ET_FNT ; ET_FNT1
mov bx, 1000h ;
mov cx, 255 ; 256 symbols
xor dx, dx ; 0 - position of first symbol
mov ax, 1100h
int 10h
end if
; draw frames
push 0xb800
pop es
xor di, di
mov ah, 1*16+15
; draw top
mov si, d80x25_top
mov cx, d80x25_top_num * 80
@@:
lodsb
stosw
loop @b
; draw spaces
mov si, space_msg
mov dx, 25 - d80x25_top_num - d80x25_bottom_num
dfl1:
push si
mov cx, 80
@@:
lodsb
stosw
loop @b
pop si
dec dx
jnz dfl1
; draw bottom
mov si, d80x25_bottom
mov cx, d80x25_bottom_num * 80
@@:
lodsb
stosw
loop @b
mov byte [space_msg+80], 0 ; now space_msg is null terminated
_setcursor d80x25_top_num,0
push 0
popf
sti
push 0
pop es
and word [es:0x9031], 0
; \begin{Mario79}
; find HDD IDE DMA PCI device
; check for PCI BIOS
mov ax, 0xB101
int 0x1A
jc .nopci
cmp edx, 'PCI '
jnz .nopci
; find PCI class code
; class 1 = mass storage
; subclass 1 = IDE controller
; a) class 1, subclass 1, programming interface 0x80
mov ax, 0xB103
mov ecx, 1*10000h + 1*100h + 0x80
xor si, si ; device index = 0
int 0x1A
jnc .found
; b) class 1, subclass 1, programming interface 0x8A
mov ax, 0xB103
mov ecx, 1*10000h + 1*100h + 0x8A
xor si, si ; device index = 0
int 0x1A
jnc .found
; c) class 1, subclass 1, programming interface 0x85
mov ax, 0xB103
mov ecx, 1*10000h + 1*100h + 0x85
xor si, si
int 0x1A
jc .nopci
.found:
; get memory base
mov ax, 0xB10A
mov di, 0x20 ; memory base is config register at 0x20
int 0x1A
jc .nopci
and cx, 0xFFF0 ; clear address decode type
mov [es:0x9031], cx
.nopci:
; \end{Mario79}
mov al, 0xf6 ; <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
out 0x60, al
xor cx, cx
wait_loop: ; variant 2
; reading state of port of 8042 controller
in al, 64h
and al, 00000010b ; ready flag
; wait until 8042 controller is ready
loopnz wait_loop
;;;/diamond today 5.02.2008
; set keyboard typematic rate & delay
mov al, 0xf3
out 0x60, al
xor cx, cx
@@:
in al, 64h
test al, 2
loopnz @b
mov al, 0
out 0x60, al
xor cx, cx
@@:
in al, 64h
test al, 2
loopnz @b
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; --------------- APM ---------------------
and word [es:0x9044], 0 ; ver = 0.0 (APM not found)
mov ax, 0x5300
xor bx, bx
int 0x15
jc apm_end ; APM not found
test cx, 2
jz apm_end ; APM 32-bit protected-mode interface not supported
mov [es:0x9044], ax ; Save APM Version
mov [es:0x9046], cx ; Save APM flags
; Write APM ver ----
and ax, 0xf0f
add ax, '00'
mov si, msg_apm
mov [si + 5], ah
mov [si + 7], al
_setcursor 0, 3
call printplain
; ------------------
mov ax, 0x5304 ; Disconnect interface
xor bx, bx
int 0x15
mov ax, 0x5303 ; Connect 32 bit mode interface
xor bx, bx
int 0x15
mov [es:0x9040], ebx
mov [es:0x9050], ax
mov [es:0x9052], cx
mov [es:0x9054], dx
apm_end:
_setcursor d80x25_top_num, 0
push 0
pop es
noloaderblock:
; DISPLAY VESA INFORMATION
call print_vesa_info
call calc_vmodes_table
call check_first_parm ;check and enable cursor_pos
; \begin{diamond}[30.11.2005]
cfgmanager:
; settings:
; a) preboot_graph = graphical mode
; preboot_gprobe = probe this mode?
; b) preboot_dma = use DMA access?
; c) preboot_vrrm = use VRR?
; d) preboot_device = from what boot?
; determine default settings
mov [.bSettingsChanged], 0
;.preboot_gr_end:
mov di, preboot_device
; if image in memory is present and [preboot_device] is uninitialized,
; set it to use this preloaded image
cmp byte [di], 0
jnz .preboot_device_inited
cmp [.loader_block], -1
jz @f
les bx, [.loader_block]
test byte [es:bx+1], 1
jz @f
mov byte [di], 3
jmp .preboot_device_inited
@@:
; otherwise, set [preboot_device] to 1 (default value - boot from floppy)
mov byte [di], 1
.preboot_device_inited:
; following 6 lines set variables to 1 if its current value is 0
cmp byte [di+preboot_dma-preboot_device], 1
adc byte [di+preboot_dma-preboot_device], 0
cmp byte [di+preboot_biosdisk-preboot_device], 1
adc byte [di+preboot_biosdisk-preboot_device], 0
cmp byte [di+preboot_vrrm-preboot_device], 1
adc byte [di+preboot_vrrm-preboot_device], 0
; notify user
_setcursor 5,2
mov si, linef
call printplain
mov si, start_msg
call print
mov si, time_msg
call print
; get start time
call .gettime
mov [.starttime], eax
mov word [.timer], .newtimer
mov word [.timer+2], cs
.printcfg:
_setcursor 9,0
mov si, current_cfg_msg
call print
mov si, curvideo_msg
call print
call draw_current_vmode
mov si, usebd_msg
cmp [preboot_biosdisk], 1
call .say_on_off
mov si, vrrm_msg
cmp [preboot_vrrm], 1
call .say_on_off
mov si, preboot_device_msg
call print
mov al, [preboot_device]
and eax, 7
mov si, [preboot_device_msgs+eax*2]
call printplain
.show_remarks:
; show remarks in gray color
mov di, ((21-num_remarks)*80 + 2)*2
push 0xB800
pop es
mov cx, num_remarks
mov si, remarks
.write_remarks:
lodsw
push si
xchg ax, si
mov ah, 1*16+7 ; background: blue (1), foreground: gray (7)
push di
.write_remark:
lodsb
test al, al
jz @f
stosw
jmp .write_remark
@@:
pop di
pop si
add di, 80*2
loop .write_remarks
.wait:
_setcursor 25,0 ; out of screen
; set timer interrupt handler
cli
push 0
pop es
push dword [es:8*4]
pop dword [.oldtimer]
push dword [.timer]
pop dword [es:8*4]
; mov eax, [es:8*4]
; mov [.oldtimer], eax
; mov eax, [.timer]
; mov [es:8*4], eax
sti
; wait for keypressed
xor ax,ax
int 16h
push ax
; restore timer interrupt
; push 0
; pop es
mov eax, [.oldtimer]
mov [es:8*4], eax
mov [.timer], eax
_setcursor 7,0
mov si, space_msg
call printplain
; clear remarks and restore normal attributes
push es
mov di, ((21-num_remarks)*80 + 2)*2
push 0xB800
pop es
mov cx, num_remarks
mov ax, ' ' + (1*16 + 15)*100h
@@:
push cx
mov cx, 76
rep stosw
pop cx
add di, 4*2
loop @b
pop es
pop ax
; switch on key
cmp al, 13
jz .continue
or al, 20h
cmp al, 'a'
jz .change_a
cmp al, 'b'
jz .change_b
cmp al, 'c'
jz .change_c
cmp al, 'd'
jnz .show_remarks
_setcursor 15,0
mov si, bdev
call print
mov bx, '14'
call getkey
mov [preboot_device], al
_setcursor 13,0
.d:
mov [.bSettingsChanged], 1
call clear_vmodes_table ;clear vmodes_table
jmp .printcfg
.change_a:
.loops:
call draw_vmodes_table
_setcursor 25,0 ; out of screen
xor ax,ax
int 0x16
; call clear_table_cursor ;clear current position of cursor
mov si,word [cursor_pos]
cmp ah,0x48;x,0x48E0 ; up
jne .down
cmp si,modes_table
jbe .loops
sub word [cursor_pos],size_of_step
jmp .loops
.down: cmp ah,0x50;x,0x50E0 ; down
jne .pgup
cmp word[es:si+10],-1
je .loops
add word [cursor_pos],size_of_step
jmp .loops
.pgup: cmp ah,0x49 ; page up
jne .pgdn
sub si, size_of_step*long_v_table
cmp si, modes_table
jae @f
mov si, modes_table
@@:
mov word [cursor_pos], si
mov si, word [home_cursor]
sub si, size_of_step*long_v_table
cmp si, modes_table
jae @f
mov si, modes_table
@@:
mov word [home_cursor], si
jmp .loops
.pgdn: cmp ah,0x51 ; page down
jne .enter
mov ax, [end_cursor]
add si, size_of_step*long_v_table
cmp si, ax
jb @f
mov si, ax
sub si, size_of_step
@@:
mov word [cursor_pos], si
mov si, word [home_cursor]
sub ax, size_of_step*long_v_table
add si, size_of_step*long_v_table
cmp si, ax
jb @f
mov si, ax
@@:
mov word [home_cursor], si
jmp .loops
.enter: cmp al,0x0D;x,0x1C0D ; enter
jne .loops
push word [cursor_pos]
pop bp
push word [es:bp]
pop word [x_save]
push word [es:bp+2]
pop word [y_save]
push word [es:bp+6]
pop word [number_vm]
mov word [preboot_graph],bp ;save choose
jmp .d
.change_b:
_setcursor 15,0
; mov si, ask_dma
; call print
; mov bx, '13'
; call getkey
; mov [preboot_dma], al
mov si, ask_bd
call print
mov bx, '12'
call getkey
mov [preboot_biosdisk], al
_setcursor 11,0
jmp .d
.change_c:
_setcursor 15,0
mov si, vrrmprint
call print
mov bx, '12'
call getkey
mov [preboot_vrrm], al
_setcursor 12,0
jmp .d
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
.say_on_off:
pushf
call print
mov si, on_msg
popf
jz @f
mov si, off_msg
@@: jmp printplain
; novesa and vervesa strings are not used at the moment of executing this code
virtual at novesa
.oldtimer dd ?
.starttime dd ?
.bSettingsChanged db ?
.timer dd ?
end virtual
.loader_block dd -1
.gettime:
mov ah, 0
int 1Ah
xchg ax, cx
shl eax, 10h
xchg ax, dx
ret
.newtimer:
push ds
push cs
pop ds
pushf
call [.oldtimer]
pushad
call .gettime
sub eax, [.starttime]
sub ax, 18*5
jae .timergo
neg ax
add ax, 18-1
mov bx, 18
xor dx, dx
div bx
if lang eq ru
; <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 5 ᥪ㭤, 4/3/2 ᥪ㭤<EFBFBD>, 1 ᥪ㭤<EFBFBD>
cmp al, 5
mov cl, ' '
jae @f
cmp al, 1
mov cl, '<27>'
jz @f
mov cl, '<27>'
@@: mov [time_str+9], cl
else if lang eq et
cmp al, 1
ja @f
mov [time_str+9], ' '
mov [time_str+10],' '
@@:
else
; wait 5/4/3/2 seconds, 1 second
cmp al, 1
mov cl, 's'
ja @f
mov cl, ' '
@@: mov [time_str+9], cl
end if
add al, '0'
mov [time_str+1], al
mov si, time_msg
_setcursor 7,0
call print
_setcursor 25,0
popad
pop ds
iret
.timergo:
push 0
pop es
mov eax, [.oldtimer]
mov [es:8*4], eax
mov sp, 0EC00h
.continue:
sti
_setcursor 6,0
mov si, space_msg
call printplain
call printplain
_setcursor 6,0
mov si, loading_msg
call print
_setcursor 15,0
cmp [.bSettingsChanged], 0
jz .load
cmp [.loader_block], -1
jz .load
les bx, [.loader_block]
mov eax, [es:bx+3]
push ds
pop es
test eax, eax
jz .load
push eax
mov si, save_quest
call print
.waityn:
mov ah, 0
int 16h
or al, 20h
cmp al, 'n'
jz .loadc
cmp al, 'y'
jnz .waityn
call putchar
mov byte [space_msg+80], 186
pop eax
push cs
push .cont
push eax
retf
.loadc:
pop eax
.cont:
push cs
pop ds
mov si, space_msg
mov byte [si+80], 0
_setcursor 15,0
call printplain
_setcursor 15,0
.load:
; \end{diamond}[02.12.2005]
; ASK GRAPHICS MODE
call set_vmode
; GRAPHICS ACCELERATION
; force yes
mov [es:0x901C], byte 1
; DMA ACCESS TO HD
mov al, [preboot_dma]
mov [es:0x901F], al
; SET GRAPHICS
xor ax, ax
mov es, ax
mov ax, [es:0x9008] ; vga & 320x200
mov bx, ax
cmp ax, 0x13
je setgr
cmp ax, 0x12
je setgr
mov ax, 0x4f02 ; Vesa
setgr:
int 0x10
test ah, ah
mov si, fatalsel
jnz v_mode_error
; set mode 0x12 graphics registers:
cmp bx, 0x12
jne gmok2
mov al, 0x05
mov dx, 0x03ce
push dx
out dx, al ; select GDC mode register
mov al, 0x02
inc dx
out dx, al ; set write mode 2
mov al, 0x02
mov dx, 0x03c4
out dx, al ; select VGA sequencer map mask register
mov al, 0x0f
inc dx
out dx, al ; set mask for all planes 0-3
mov al, 0x08
pop dx
out dx, al ; select GDC bit mask register
; for writes to 0x03cf
gmok2:
push ds
pop es