forked from KolibriOS/kolibrios
593 lines
19 KiB
NASM
593 lines
19 KiB
NASM
;***************************************************************
|
|
; project name: PCI Device Enumeration
|
|
; target platform: KolibriOS
|
|
; compiler: flat assembler 1.68
|
|
; version: 2.2
|
|
; last update: December 2007
|
|
; maintained by: Jason Delozier (cordata51@hotmail.com)
|
|
; Sergey Kuzmin (kuzmin_serg@list.ru)
|
|
; Mihailov Ilia (ghost.nsk@gmail.com)
|
|
; Artem Jerdev (art_zh@yahoo.com)
|
|
; project site: http://www.coolthemes.narod.ru/pcidev.html
|
|
;***************************************************************
|
|
;Summary: This program will attempt to scan the PCI Bus
|
|
; and display basic information about each device
|
|
; connected to the PCI Bus.
|
|
;***************************************************************
|
|
;HISTORY:
|
|
;keep dates in european format (dd/mm/yyyy), please
|
|
; '!' means big changes
|
|
;
|
|
;to-do:
|
|
; more vendors
|
|
; vendor's website
|
|
; Subsystem id and Subsystem vendor id detection
|
|
|
|
; Full device detection (like "ATI Radeon 9200") will increase app
|
|
; size a lot and probably it is function of particular drivers
|
|
;----------------------------------------------------------------
|
|
;2.2: PCIDEV 03/01/2010
|
|
;Author: Artem Jerdev <art_zh@yahoo.com>
|
|
;Features:
|
|
; fixed
|
|
; * English in some comments ;)
|
|
; added
|
|
; * ! user-accessible MMIO channels detection
|
|
; * ! ASCII-dump as PCI memory access demonstration
|
|
; optimization
|
|
; * (yet needed)
|
|
;----------------------------------------------------------------
|
|
;2.1: PCIDEV ??/04/2007
|
|
;Author: Mihailov Ilia aka Ghost <ghost.nsk@gmail.com>
|
|
;Features:
|
|
; fixed
|
|
; * Some little bugs
|
|
; * Source code formating
|
|
; * PCI version normalized 0210 -> 2.10
|
|
; added
|
|
; * + 13 vendor (total now 1000!)
|
|
; * + 3 class type
|
|
; * Fast call source ready
|
|
; * Device IRQ detection
|
|
; optimized
|
|
; * ! size optimized (61025 -> 32501 see added)
|
|
; * easy to add new vendor & class names
|
|
;----------------------------------------------------------------
|
|
;2.0: PCIDEV 30/08/2006
|
|
;(it differs a lot from the version 1.0, which was introduced 19 months ago)
|
|
;Author: Marat Zakiyanov aka Mario79 <mario79@bk.ru>
|
|
; Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
|
|
;Features:
|
|
; added
|
|
; * Detection of Interface by Mario79
|
|
; * 122 vendor id's by Wildwest
|
|
; * Description is based on Class, SubClass and Interface now (PCI 3.0) by Wildwest
|
|
;----------------------------------------------------------------
|
|
;1.31: PCIDEV 13/05/2006
|
|
;Author: Jason Delozier <cordata51@hotmail.com>
|
|
;Features:
|
|
; fixed
|
|
; * ! bug in Company Name look up code that would cause Unknown Name errors.
|
|
; * ! possible bugs, many instructions missing byte, word, dword prefixes
|
|
; * ! possible bug which could have occured after removing "PREVIOUSVERSIONLIST"
|
|
; entry in loop up code and not fixing jump parameters.
|
|
; added
|
|
; * comments to various parts of the code
|
|
; optimized
|
|
; * various parts of the source, too many to remember and mention.
|
|
; * changed entries for Subclasses in vendors.inc to Byte format, saves a little space.
|
|
;----------------------------------------------------------------
|
|
;1.30: PCIDEV 11/05/2006
|
|
;Author: Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
|
|
;Features:
|
|
; added
|
|
; * 3 new vendor id's (ESS from Madis Kalme and 2 id's
|
|
; forgotten from 1.15 release: Broadcom -SiByte and Chaintech Comp.)
|
|
; changed
|
|
; * I don't know why other devs (Jason or Victor) changed window style
|
|
; to old ugly one, so I changed it back to skinned type 3.
|
|
; * the same goes to the use of macroc.inc - it is enabled again.
|
|
; deleted
|
|
; * there is no more label "PREVIOUSVERSIONLIST" - id's moved to the
|
|
; appropriate parts of global list.
|
|
;----------------------------------------------------------------
|
|
;1.29: PCIDEV 30/04/2006
|
|
;Author: Jason Delozier <cordata51@hotmail.com>
|
|
;Features:
|
|
; fixed
|
|
; * ! bug that would not allow devices with device
|
|
; numbers > 16 to be displayed.
|
|
; added
|
|
; * ! another heading called "FNC" (function) which allows
|
|
; the multipurpose Device/Function varible to be split and
|
|
; displayed to the user properly.
|
|
; * horizontal bars to display for easier reading.
|
|
; optimized
|
|
; * vendor/description search routines for speed and space.
|
|
;----------------------------------------------------------------
|
|
;1.25: PCIDEV 02/10/2005
|
|
;Author: Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
|
|
;Features:
|
|
; changed
|
|
; * ! Description is based on Class and SubClass
|
|
; now (PCI 3.0). The Names of Classes and SubClasses
|
|
; are in the end of Vendors.inc
|
|
; deleted
|
|
; * label "Descriptions" (names of Classes)
|
|
;
|
|
;----------------------------------------------------------------
|
|
;1.20: PCIDEV 16/08/2005
|
|
;Author: Victor Alberto Gil Hanla a.k.a. vhanla <vhanla@gmail.com>
|
|
;Features:
|
|
; added
|
|
; * ! many vendor lists (865)
|
|
; deleted
|
|
; * previous version's list
|
|
; changed
|
|
; * previous Company Name searching and printing
|
|
;----------------------------------------------------------------
|
|
;1.15: PCIDEV 03/06/2005
|
|
;Author: Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
|
|
;Features:
|
|
; added
|
|
; * quantity of devices,
|
|
; * ! detection of Company Name based on Vendor ID,
|
|
; * database of VenID (35 ID's),
|
|
; * macros.inc for smaller size,
|
|
; changed
|
|
; * interface+(skinned window),
|
|
; * VenID before DevID in 'table'(was DevID before VenID)
|
|
;----------------------------------------------------------------
|
|
;1.0: PCIDEV 30/01/2005
|
|
;Author: Jason Delozier
|
|
;Features:
|
|
; able to
|
|
; * detect PCI version,
|
|
; * quantity of PCI buses,
|
|
; * Vendor&Device ID for appropriate Device on Bus;
|
|
; * detect Revision, Class and Subclass of Device,
|
|
; * and make Description based on Class
|
|
;-------------------------------------------------------------
|
|
include '../../../macros.inc'
|
|
;include 'macros.inc'
|
|
|
|
MEOS_APP_START
|
|
CODE
|
|
call draw_window
|
|
|
|
still: mcall 10 ; wait here for event
|
|
dec eax ; redraw request ?
|
|
jz red
|
|
dec eax ; key in buffer ?
|
|
jz key
|
|
dec eax ; button in buffer ?
|
|
jz button
|
|
jmp still
|
|
|
|
red: ; redraw
|
|
mcall 9, Proc_Info, -1 ; window redraw requested so get new window coordinates and size
|
|
mov eax, [Proc_Info.box.left]; store the window coordinates into the Form Structure
|
|
mov [Form + 2], ax ; x start position
|
|
mov eax, [Proc_Info.box.top];
|
|
mov [Form + 6], ax ; ystart position
|
|
mov eax, [Proc_Info.box.width] ;
|
|
mov [Form], ax ; window width
|
|
mov eax, [Proc_Info.box.height] ;
|
|
mov [Form + 4] ,ax ; window height
|
|
call draw_window ; go redraw window now
|
|
jmp still
|
|
|
|
key: ; key
|
|
mcall 2 ; just read it and ignore
|
|
jmp still
|
|
button: ; button
|
|
mcall 17 ; get id
|
|
cmp ah, 1 ; button id = 1 ?
|
|
jne still
|
|
mcall -1 ; close this program
|
|
|
|
draw_window:
|
|
mov byte [total], 0
|
|
mcall 12, 1 ; start of draw
|
|
; DRAW WINDOW
|
|
mcall 0, dword [Form], dword [Form + 4], 0x13ffffff, 0x805080d0, title
|
|
; Insert horizontal bars in list area
|
|
mov eax, 13 ; draw bar system function
|
|
mov ebx, 18 ; set Xstart position of bar
|
|
shl ebx, 16 ;
|
|
mov bx, word [Form] ; get width of window
|
|
sub bx, 32 ; bar is 32 pixels shorter then window width
|
|
mov ecx, 119 * 65536 + 10 ; set Ystart(109) and Height(10) of bar 109
|
|
mov edx, 0xC0C0C0 ; set color of bar
|
|
again: ;begin draw bar loop
|
|
mcall ; draw bar to window area
|
|
shr ecx, 16 ; move the Ystart position to working area
|
|
add ecx, 34 ; add 34 pixels to Y Start (moves bar down)
|
|
cmp cx, word [Form + 4] ; is the Ystart position outside of window area
|
|
jae nomo ; if so stop drawing bars
|
|
sub ecx, 14 ; if not, we only need 20 pixels between bar tops
|
|
shl ecx, 16 ; set that values as Ystart
|
|
add ecx, 10 ; Bar Height is always 10 pixels
|
|
jmp again ; draw another bar
|
|
nomo: ;done drawing bars here
|
|
; start PCI stuff
|
|
call Get_PCI_Info ; get pci version and last bus, scan for and draw each pci device
|
|
|
|
; Window inteface
|
|
mov cx, [PCI_Version]
|
|
add ch, '0'
|
|
mov [PCIWin + 85], ch ; 0xBADCODE but it works !
|
|
mov ch, cl
|
|
shr cl, 4
|
|
and ch, 0x0f
|
|
add cx, '00'
|
|
mov [PCIWin + 87], cx
|
|
mov cl, [PCI_LastBus] ; will only work if [PCI_LastBus] < 10
|
|
add cl, '0'
|
|
mov [PCIWin + 106], cl
|
|
|
|
mov edx, PCIWin
|
|
mov ebx, 20 * 65536 + 25 ; x start, ystart of text
|
|
mov ecx, 0x224466 ; color of text
|
|
mov eax, 4
|
|
@@: movzx esi, byte[edx]
|
|
inc edx
|
|
mcall
|
|
add ebx, 10
|
|
add edx, esi
|
|
cmp byte[edx], -1
|
|
jne @b
|
|
; Quantity of devices...
|
|
movzx ecx, byte [total] ; number to draw
|
|
mcall 47, 0x00020000,,150 * 65536 + 65, 0x224466
|
|
|
|
mov ah, [MMIO_allowed]
|
|
or ah, ah
|
|
jz @f
|
|
mov ah, [MMIO_Bus] ; =255 if MMIO disabled / not found
|
|
and ah, 0x7f
|
|
inc ah
|
|
jo @f
|
|
call Try_MMIO
|
|
@@:
|
|
mcall 12, 2 ; end of draw
|
|
ret
|
|
|
|
;------------------------------------------------------------------
|
|
;* Gets the PCI Version and Last Bus
|
|
Get_PCI_Info:
|
|
mcall 62, 0
|
|
mov word [PCI_Version], ax
|
|
mcall 62, 1
|
|
mov byte [PCI_LastBus], al
|
|
;----------------------------------------------------------
|
|
;* Get all devices on PCI Bus
|
|
cmp al, 0xff ; 0xFF means no pci bus found
|
|
jne Pci_Exists ;
|
|
ret ; if no bus then leave
|
|
Pci_Exists:
|
|
mov byte [V_Bus], 0 ; reset varibles
|
|
mov byte [V_Dev], 0 ;
|
|
mov edx, 20 * 65536 + 110 ; set start write position
|
|
Start_Enum:
|
|
mov bl, 6 ; get a dword
|
|
mov bh, byte [V_Bus] ; bus of pci device
|
|
mov ch, byte [V_Dev] ; device number/function
|
|
mov cl, 0 ; offset to device/vendor id
|
|
mcall 62 ; get ID's
|
|
|
|
cmp ax, 0 ; Vendor ID should not be 0 or 0xFFFF
|
|
je nextDev ; check next device if nothing exists here
|
|
cmp ax, 0xffff ;
|
|
je nextDev ;
|
|
|
|
mov word [PCI_Vendor], ax ; There is a device here, save the ID's
|
|
shr eax, 16 ;
|
|
mov word [PCI_Device], ax ;
|
|
mov bl, 4 ; Read config byte
|
|
mov bh, byte [V_Bus] ; Bus #
|
|
mov ch, byte [V_Dev] ; Device # on bus
|
|
mov cl, 0x08 ; Register to read (Get Revision)
|
|
mcall 62 ; Read it
|
|
mov byte [PCI_Rev], al ; Save it
|
|
mov cl, 0x0b ; Register to read (Get class)
|
|
mcall 62 ; Read it
|
|
|
|
mov byte [PCI_Class], al ; Save it
|
|
mov cl, 0x0a ; Register to read (Get Subclass)
|
|
mcall 62 ; Read it
|
|
mov byte [PCI_SubClass], al; Save it
|
|
; by Mario79 august 2006
|
|
mov cl, 0x09 ; Register to read (Get Interface)
|
|
mcall 62 ; Read it
|
|
mov [PCI_Interface], al ; Save it
|
|
;
|
|
; by Ghost april 2007
|
|
mov cl, 0x3c ; Register to read (Get IRQ)
|
|
@@: mcall 62 ; Read it
|
|
mov [PCI_IRQ], al ; Save it
|
|
;
|
|
inc byte [total] ; one more device found
|
|
call Print_New_Device ; print device info to screen
|
|
nextDev:
|
|
inc byte [V_Dev] ; next device on this bus
|
|
jnz Start_Enum ; jump until we reach zero
|
|
;(used to be JNO which caused bug!!! 30-4-2006, JMD)
|
|
mov byte [V_Dev], 0 ; reset device number
|
|
inc byte [V_Bus] ; next bus
|
|
mov al, byte [PCI_LastBus] ; get last bus
|
|
cmp byte [V_Bus], al ; was it last bus
|
|
jbe Start_Enum ; if not jump to keep searching
|
|
ret
|
|
|
|
no_ummio_allowed:
|
|
xor al,al
|
|
mov [MMIO_allowed],al ; re-enter the subroutine
|
|
;------------------------------------------------------------------
|
|
;* Print device info to screen
|
|
|
|
Print_New_Device:
|
|
xor esi, esi ; default text color
|
|
mov cl, [MMIO_allowed]
|
|
or cl,cl
|
|
jz no_ummio_here
|
|
mov ch, byte [V_Bus]
|
|
mov cl, byte [V_Dev]
|
|
mcall 62, 11 ; detect uMMIO
|
|
and ax,0x7fff
|
|
inc ax ; -1 returned?
|
|
jo no_ummio_allowed
|
|
inc ax ; -2 returned?
|
|
jo no_ummio_here
|
|
inc ax ; -3 returned?
|
|
jo no_ummio_here
|
|
mov esi, 0x990033 ; highlighted text color
|
|
mov bh, byte [V_Bus]
|
|
mov bl, byte [V_Dev]
|
|
mov byte [MMIO_Bus], bh
|
|
mov byte [MMIO_Dev], bl
|
|
add bh,'0'
|
|
mov [PCIWin + 129], bh ; uMMIO bus
|
|
mov al, bl
|
|
shr al, 1
|
|
shr al, 1
|
|
shr al, 1
|
|
add al,'0'
|
|
mov [PCIWin + 131], al ; uMMIO device
|
|
and bl, 7
|
|
add bl, '0'
|
|
mov [PCIWin + 133], bl ; uMMIO function
|
|
|
|
no_ummio_here:
|
|
movzx ecx,word [PCI_Vendor] ; Pointer to number to be written
|
|
mcall 47, 0x00040100 ; Write Vendor ID
|
|
and edx, 0xFFFF ;*****************************************
|
|
or edx, 54 * 65536 ; X start becomes 54
|
|
movzx ecx, word [PCI_Device] ; get Vendor ID
|
|
mcall ; Draw Vendor ID to Window
|
|
and edx, 0xFFFF ;*****************************************
|
|
or edx, 98 * 65536 ; X start becomes 98
|
|
movzx ecx, byte [V_Bus] ; get bus number
|
|
mcall ,0x00020100 ; draw bus number to screen
|
|
and edx, 0xFFFF ;*****************************************
|
|
or edx, 128 * 65536 ; X start becomes 128
|
|
movzx ecx, byte [V_Dev] ; get device number
|
|
shr ecx, 3 ; device number is bits 3-7
|
|
mcall ; Draw device Number To Window
|
|
|
|
and edx, 0xFFFF ;*****************************************
|
|
or edx, 155 * 65536 ; X start becomes 155
|
|
movzx ecx, byte [V_Dev] ; get Function number
|
|
and ecx, 7 ; function is first 3 bits
|
|
mcall ; Draw Function Number To Window
|
|
and edx, 0xFFFF ;*****************************************
|
|
or edx, 179 * 65536 ; X start becomes 179
|
|
movzx ecx, byte [PCI_Rev] ; get revision number
|
|
mcall ; Draw Revision to screen
|
|
and edx, 0xFFFF ;*****************************************
|
|
or edx, 215*65536 ; X start becomes 215
|
|
movzx ecx, byte [PCI_Class] ; get PCI_Class
|
|
mcall ; Draw Class to screen
|
|
and edx, 0xFFFF ;*****************************************
|
|
or edx, 250*65536 ; X start becomes 250
|
|
movzx ecx, byte [PCI_SubClass]; get sub class
|
|
mcall ; Draw Sub Class to screen
|
|
; from Mario79 august 2006
|
|
and edx, 0xFFFF ;*****************************************
|
|
or edx, 280 * 65536 ; X start becomes 280
|
|
movzx ecx, [PCI_Interface] ; get Interface
|
|
mcall
|
|
;
|
|
; from Ghost april 2007 ;*****************************************
|
|
movzx ecx, [PCI_IRQ] ; get Interface
|
|
cmp cl, 0x0f ; IRQ between 0..15
|
|
ja @f
|
|
and edx, 0xFFFF
|
|
or edx, 310 * 65536 ; X start becomes 310
|
|
mcall
|
|
@@:
|
|
;
|
|
;Write Names
|
|
movzx ebx, dx ; Set y position
|
|
or ebx, 340 * 65536 ; set Xposition to 340
|
|
|
|
;------------------------------------------------------------------
|
|
; Prints the Vendor's Name based on Vendor ID
|
|
;
|
|
; Modified on ??-04-2007 by Ghost for size
|
|
;------------------------------------------------------------------
|
|
mov edx, VendorsTab
|
|
mov cx, word[PCI_Vendor]
|
|
|
|
.fn: mov ax, [edx]
|
|
add edx, 6
|
|
test ax, ax
|
|
jz .find
|
|
cmp ax, cx
|
|
jne .fn
|
|
.find: mov edx, [edx - 4]
|
|
mcall 4,, 0x80000000 ; lets print the vendor Name
|
|
|
|
;------------------------------------------------------------------
|
|
; Get description based on Class/Subclass
|
|
;
|
|
; Modified on ??-04-2007 by Ghost for size
|
|
;------------------------------------------------------------------
|
|
mov eax, dword [PCI_Class]
|
|
and eax, 0xffffff
|
|
xor edx, edx
|
|
xor esi, esi
|
|
.fnc: inc esi
|
|
mov ecx, [Classes + esi * 8 - 8]
|
|
cmp cx, 0xffff
|
|
je .endfc
|
|
cmp cx, ax
|
|
jne .fnc
|
|
test ecx, 0xff000000
|
|
jz @f
|
|
mov edx, [Classes + esi * 8 - 4]
|
|
jmp .fnc
|
|
@@: cmp eax, ecx
|
|
jne .fnc
|
|
xor edx, edx
|
|
.endfc: test edx, edx
|
|
jnz @f
|
|
mov edx, [Classes + esi * 8 - 4]
|
|
@@:
|
|
and ebx, 0x0000FFFF ; clear X position
|
|
or ebx, 0x24E0000 ; set X position to 590 pixels
|
|
mcall 4,, 0x80000000,, 32 ; draw the text
|
|
movzx edx, bx ; get y coordinate
|
|
add edx, 0x0014000A ; add 10 to y coordinate and set x coordinate to 20
|
|
mov [gr_pos], edx
|
|
ret
|
|
;------------------------------------------------------------------
|
|
; Get the user-MMIO related info
|
|
;
|
|
; Added on ??-12-2009 by art_zh
|
|
;------------------------------------------------------------------
|
|
Try_MMIO:
|
|
xor ebx, ebx
|
|
mov edx, ebx
|
|
mov bh, [MMIO_BAR]
|
|
or bx, 12 ; function 12
|
|
mov ecx, 4096 ; =1 page to map
|
|
mcall 62
|
|
mov [MMIO_Map], eax ; store MMIO lin.addr.
|
|
mov ecx, 0x80990022 ; print color : red
|
|
add bh, '0'
|
|
cmp eax, -3
|
|
jne @f
|
|
mov [bar_um+3], bh
|
|
mov ebx, [gr_pos]
|
|
mov edx, bar_um
|
|
mcall 4
|
|
jmp mmio_next_bar
|
|
@@:
|
|
cmp eax, -4
|
|
jne @f
|
|
mov [bar_io+3], bh
|
|
mov ebx, [gr_pos]
|
|
mov edx, bar_io
|
|
mcall 4
|
|
jmp mmio_next_bar
|
|
@@:
|
|
cmp bh, '6' ; expansion ROM ?
|
|
je @f
|
|
mov [bar_ram+3], bh
|
|
mov ebx, [gr_pos]
|
|
mov edx, bar_ram
|
|
mcall 4
|
|
jmp mmio_dump
|
|
@@:
|
|
mov ebx, [gr_pos]
|
|
mov edx, bar_rom
|
|
mcall 4
|
|
|
|
mmio_dump:
|
|
mov edx, [MMIO_Map]
|
|
mov esi, 64
|
|
mov ecx, 0x099 ; dump color : blue
|
|
add ebx, 10
|
|
mov [gr_pos], ebx
|
|
mcall 4
|
|
mov ecx, [MMIO_Map] ; release the tried page
|
|
mcall 62,13
|
|
|
|
mmio_next_bar:
|
|
mov bh, [MMIO_BAR]
|
|
inc bh
|
|
cmp bh,7
|
|
je @f
|
|
mov [MMIO_BAR], bh
|
|
add [gr_pos], 10
|
|
jmp Try_MMIO
|
|
|
|
@@:
|
|
xor bh,bh
|
|
mov [MMIO_BAR], bh
|
|
ret
|
|
|
|
|
|
include 'vendors.inc'
|
|
;------------------------------------------------------------------
|
|
; DATA AREA
|
|
DATA
|
|
|
|
|
|
Form: dw 800 ; window width (no more, special for 800x600)
|
|
dw 100 ; window x start
|
|
dw 620 ; window height
|
|
dw 20 ; window y start
|
|
|
|
title db 'PCI Device Enumerator v 2.2 by J.Delozier, S.Kuzmin, V.Hanla, M.Zakiyanov, A.Jerdev', 0
|
|
|
|
PCIWin mls \
|
|
' Don`t forget to enable PCI Access to Applications in Setup Menu.',\
|
|
'',\
|
|
'PCI Version = x.xx; Last PCI Bus = x',\
|
|
'User MMIO channel = 0F.F:F ',\
|
|
'Number of PCI units =',\
|
|
'',\
|
|
'VenID DevID Bus# Dev# Fnc Rev Class Subclass/ IRQ Company Description',\
|
|
' Interface',\
|
|
'----- ----- ---- ---- --- --- ----- --------- --- ------------------------------------------ ----------------'
|
|
|
|
bar_ram db 'BARx: MMIO block', 0
|
|
bar_io db 'BARx: IO ports',0
|
|
bar_um db 'BARx: unmapped',0
|
|
bar_rom db 'BAR6: Expansion ROM', 0
|
|
|
|
;------------------------------------------------------------------
|
|
; UNINITIALIZED DATA AREA
|
|
UDATA
|
|
|
|
total db ?
|
|
V_Bus db ?
|
|
V_Dev db ?
|
|
PCI_Version dw ?
|
|
PCI_LastBus db ?
|
|
PCI_Device dw ?
|
|
PCI_Vendor dw ?
|
|
PCI_Bus db ?
|
|
PCI_Dev db ?
|
|
PCI_Rev db ?
|
|
; don`t change order!!!
|
|
PCI_Class db ?
|
|
PCI_SubClass db ?
|
|
PCI_Interface db ?
|
|
PCI_IRQ db ?
|
|
|
|
align 4
|
|
MMIO_Bus db 255
|
|
MMIO_Dev db 255
|
|
MMIO_BAR db 0
|
|
MMIO_allowed db 1
|
|
MMIO_Map rd 8
|
|
|
|
gr_pos dd ?
|
|
|
|
Proc_Info process_information
|
|
MEOS_APP_END
|
|
|