kolibrios/kernel/trunk/core/sys32.inc

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                              ;;
;; Copyright (C) KolibriOS team 2004-2008. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License    ;;
;;                                                              ;;
;;                                                              ;;
;;  MenuetOS process management, protected ring3                ;;
;;                                                              ;;
;;  Distributed under GPL. See file COPYING for details.        ;;
;;  Copyright 2003 Ville Turjanmaa                              ;;
;;                                                              ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

$Revision$


align 4
idtreg:
     dw   8*0x41-1
     dd   idts+8

build_interrupt_table:

        mov    edi, idts+8
        mov    esi, sys_int
        mov    ecx, 0x40
     @@:
        lodsd
        mov    [edi],   ax           ; lower part of offset
        mov    [edi+2], word os_code ; segment selector
        mov     ax, word 10001110b shl 8        ; type: interrupt gate
        mov     [edi+4], eax
        add    edi, 8
        loop    @b

        ;mov    edi,8*0x40+idts+8
        mov     dword [edi], (i40 and 0xFFFF) or (os_code shl 16)
        mov     dword [edi+4], (11101111b shl 8) or (i40 and 0xFFFF0000)
                                                ; type: trap gate
        ret

iglobal

  msg_sel_ker   db "kernel", 0
  msg_sel_app   db "application", 0

  sys_int:
    dd e0,debug_exc,e2,e3
    dd e4,e5,e6,e7
    dd e8,e9,e10,e11
    dd e12,e13,page_fault_handler,e15

    dd except_16, e17,e18, except_19
    times 12 dd unknown_interrupt

    dd   irq0, irq_serv.irq_1, p_irq2
if USE_COM_IRQ
    dd   irq_serv.irq_3, irq_serv.irq_4
else
    dd   p_irq3, p_irq4
end if
    dd   irq_serv.irq_5,  p_irq6,         irq_serv.irq_7
    dd   irq_serv.irq_8,  irq_serv.irq_9, irq_serv.irq_10
    dd   irq_serv.irq_11, irq_serv.irq_12,irqD ,p_irq14,p_irq15

    times 16 dd unknown_interrupt

    dd   i40
endg

macro save_ring3_context
{
    pushad
}
macro restore_ring3_context
{
    popad
}

; simply return control to interrupted process
unknown_interrupt:
     iret

macro exc_wo_code [num]
{
  forward
  e#num :
      save_ring3_context
      mov bl, num
      jmp exc_c
}

macro exc_w_code [num]
{
  forward
  e#num :
      add esp, 4
      save_ring3_context
      mov bl, num
      jmp exc_c
}

exc_wo_code 0, 2, 3, 4, 5, 6, 9, 15, 18
exc_w_code 8, 10, 11, 12, 13, 14, 17

exc_c:
        mov   ax, app_data  ;<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
        mov   ds, ax        ;<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
        mov   es, ax        ;<EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>

; redirect to V86 manager? (EFLAGS & 0x20000) != 0?
        test    byte [esp+20h+8+2], 2
        jnz     v86_exc_c

; test if debugging
        cli
        mov   eax, [current_slot]
        mov   eax, [eax+APPDATA.debugger_slot]
        test  eax, eax
        jnz   .debug
        sti
; not debuggee => say error and terminate
        movzx eax, bl
        mov   [error_interrupt], eax
        call  show_error_parameters
	add   esp, 0x20
        mov   edx, [TASK_BASE]
        mov   [edx + TASKDATA.state], byte 4

        jmp   change_task

.debug:
; we are debugged process, notify debugger and suspend ourself
; eax=debugger PID
        cld
        movzx ecx, bl
        push  ecx
        mov   ecx, [TASK_BASE]
        push  dword [ecx+TASKDATA.pid]    ; PID of current process
        push  12
        pop   ecx
        push  1        ; 1=exception
        call  debugger_notify
        pop   ecx
        pop   ecx
        pop   ecx
        mov   edx, [TASK_BASE]
        mov   byte [edx+TASKDATA.state], 1        ; suspended
        call  change_task
        restore_ring3_context
        iretd

iglobal
	hexletters	db '0123456789ABCDEF'
	error_interrupt	dd  -1
endg

;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
show_error_parameters:
    mov eax,[CURRENT_TASK]
    shl eax, 5
    DEBUGF  1, "K : Process - forced terminate PID: %x\n", [CURRENT_TASK + TASKDATA.pid + eax]
    DEBUGF  1, "K : Exception : %x Error : xxxxxxxx\n", [error_interrupt]
    DEBUGF  1, "K : EAX : %x EBX : %x ECX : %x\n", [esp + 0x20], [esp - 12 + 0x20], [esp - 4 + 0x20]
    DEBUGF  1, "K : EDX : %x ESI : %x EDI : %x\n", [esp - 8 + 0x20], [esp - 24 + 0x20], [esp - 28 + 0x20]
    DEBUGF  1, "K : EBP : %x EIP : %x ", [esp - 20 + 0x20], [esp + 4 + 0x20]

    mov eax, [esp + 8 + 0x20]
    mov edi, msg_sel_app
    mov ebx, [esp + 16 + 0x20]
    cmp eax, app_code
    je  @f
    mov edi, msg_sel_ker
    mov ebx, [esp - 16 + 0x20]
@@:
    DEBUGF  1, "ESP : %x\nK : Flags : %x CS : %x (%s)\n", ebx, [esp + 12 + 0x20], eax, edi
    ret
;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


; irq1  ->  hid/keyboard.inc
macro irqh [num]
{
  forward
  p_irq#num :
     save_ring3_context
     mov   edi, num
     jmp   irq_c
}

irqh 2,5,7,8,9,10,11

irq_c:
     mov   ax, app_data  ;os_data
     mov   ds, ax
     mov   es, ax
     call  irqhandler
     restore_ring3_context
     iret

p_irq6:
     save_ring3_context
     mov   ax, app_data  ;os_data
     mov   ds, ax
     mov   es, ax
     call  fdc_irq
     call  ready_for_next_irq
     restore_ring3_context
     iret

p_irq3:
     save_ring3_context
     mov   ax, app_data  ;os_data
     mov   ds, ax
     mov   es, ax
     cmp   [com2_mouse_detected],0
     je    old_irq3_handler
     mov   esi, com2_mouse
     mov   dx, 2F8h     ;[COMPortBaseAddr]
     call  check_mouse_data_com
     jmp   p_irq3_1
 old_irq3_handler:
     mov   edi,3
     call  irqhandler
  p_irq3_1:
     restore_ring3_context
     iret

p_irq4:
     save_ring3_context
     mov   ax, app_data  ;os_data
     mov   ds, ax
     mov   es, ax
     cmp   [com1_mouse_detected],0
     je    old_irq4_handler
     mov   esi, com1_mouse
     mov   dx, 3F8h     ;[COMPortBaseAddr]
     call  check_mouse_data_com
     jmp   p_irq4_1
 old_irq4_handler:
     mov   edi,4
     call  irqhandler
  p_irq4_1:
     restore_ring3_context
     iret

p_irq14:
        save_ring3_context
        mov     ax, app_data  ;os_data
        mov     ds, ax
        mov     es, ax
        mov     byte [BOOT_VAR + 0x48E], 0xFF
        call    [irq14_func]
        call    ready_for_next_irq_1
        restore_ring3_context
        iret
p_irq15:
        save_ring3_context
        mov     ax, app_data  ;os_data
        mov     ds, ax
        mov     es, ax
        mov     byte [BOOT_VAR + 0x48E], 0xFF
        call    [irq15_func]
        call    ready_for_next_irq_1
        restore_ring3_context
        iret

ready_for_next_irq:
     mov    [check_idle_semaphore],5
     mov   al, 0x20
     out   0x20, al
     ret

ready_for_next_irq_1:
     mov    [check_idle_semaphore],5
     mov   al, 0x20
     out    0xa0,al
     out   0x20, al
     ret

irqD:
     save_ring3_context
     mov   ax, app_data  ;os_data
     mov   ds, ax
     mov   es, ax

     mov   dx,0xf0
     mov   al,0
     out   dx,al

     mov   dx,0xa0
     mov   al,0x20
     out   dx,al
     mov   dx,0x20
     out   dx,al

     restore_ring3_context

     iret


irqhandler:
        cmp     [v86_irqhooks+edi*8], 0
        jnz     v86_irq2

     push   edi

     mov    esi,edi          ; 1
     shl    esi,6            ; 1
     add    esi,irq00read    ; 1
     shl    edi,12           ; 1
     add    edi,IRQ_SAVE
     mov    ecx,16

     mov    [check_idle_semaphore],5

   irqnewread:
     dec    ecx
     js     irqover

     mov    dx,[esi]         ; 2+

     cmp    dx,0             ; 1
     jz     irqover
     cmp    [esi+3],byte 1   ; 2     ; byte read
     jne    noirqbyte        ; 4-11

     in     al,dx

     mov    edx,[edi]
     cmp    edx,4000
     je     irqfull
     mov    ebx,edi
     add    ebx,0x10
     add    ebx,edx
     mov    [ebx],al
     inc    edx
     mov    [edi],edx

     add    esi,4
     jmp    irqnewread

   noirqbyte:


     cmp    [esi+3],byte 2     ; word read
     jne    noirqword

     in     ax,dx

     mov    edx,[edi]
     cmp    edx,4000
     je     irqfull
     mov    ebx,edi
     add    ebx,0x10
     add    ebx,edx
     mov    [ebx],ax
     add    edx,2
     mov    [edi],edx
     add    esi,4
     jmp    irqnewread

   noirqword:
   irqfull:
   irqover:

     mov    al,0x20            ; ready for next irq
     out    0x20,al

     pop    ebx
     cmp    ebx,7
     jbe    noa0
     out    0xa0,al
   noa0:

     ret



set_application_table_status:
        push eax

        mov  eax,[CURRENT_TASK]
        shl  eax, 5
        add  eax,CURRENT_TASK+TASKDATA.pid
        mov  eax,[eax]

        mov  [application_table_status],eax

        pop  eax

        ret


clear_application_table_status:
        push eax

        mov  eax,[CURRENT_TASK]
        shl  eax, 5
        add  eax,CURRENT_TASK+TASKDATA.pid
        mov  eax,[eax]

        cmp  eax,[application_table_status]
        jne  apptsl1
        mov  [application_table_status],0
      apptsl1:

        pop  eax

        ret

sys_resize_app_memory:
        ; eax = 1 - resize
        ;     ebx = new amount of memory

        cmp    eax,1
        jne    .no_application_mem_resize

        stdcall new_mem_resize, ebx
        mov [esp+36], eax
        ret

.no_application_mem_resize:
        ret

sys_threads:

; eax=1 create thread
;
;   ebx=thread start
;   ecx=thread stack value
;
; on return : eax = pid
jmp new_sys_threads

iglobal
  process_terminating   db 'K : Process - terminating',13,10,0
  process_terminated    db 'K : Process - done',13,10,0
  msg_obj_destroy       db 'K : destroy app object',13,10,0
endg

; param
;  esi= slot

terminate: ; terminate application

           .slot equ esp   ;locals

           push   esi      ;save .slot

           shl esi, 8
           cmp [SLOT_BASE+esi+APPDATA.dir_table], 0
           jne @F
           pop    esi
           shl    esi, 5
           mov    [CURRENT_TASK+esi+TASKDATA.state], 9
           ret
@@:
           ;mov    esi,process_terminating
           ;call   sys_msg_board_str
           DEBUGF 1,"%s",process_terminating
@@:
           cli
           cmp   [application_table_status],0
           je    term9
           sti
           call  change_task
           jmp   @b
term9:
           call  set_application_table_status

; if the process is in V86 mode...
        mov     eax, [.slot]
        shl     eax, 8
        mov     esi, [eax+SLOT_BASE+APPDATA.pl0_stack]
        add     esi, RING0_STACK_SIZE
        cmp     [eax+SLOT_BASE+APPDATA.saved_esp0], esi
        jz      .nov86
; ...it has page directory for V86 mode
        mov     esi, [eax+SLOT_BASE+APPDATA.saved_esp0]
        mov     ecx, [esi+4]
        mov     [eax+SLOT_BASE+APPDATA.dir_table], ecx
; ...and I/O permission map for V86 mode
        mov     ecx, [esi+12]
        mov     [eax+SLOT_BASE+APPDATA.io_map], ecx
        mov     ecx, [esi+8]
        mov     [eax+SLOT_BASE+APPDATA.io_map+4], ecx
.nov86:

           mov esi, [.slot]
           shl esi,8
           add esi, SLOT_BASE+APP_OBJ_OFFSET
@@:
           mov eax, [esi+APPOBJ.fd]
           test eax, eax
           jz @F

           cmp eax, esi
           je @F

           push esi
           call [eax+APPOBJ.destroy]
           ;mov  esi, msg_obj_destroy
           ;call sys_msg_board_str
           DEBUGF 1,"%s",msg_obj_destroy
           pop esi
           jmp @B
@@:
           mov eax, [.slot]
           shl eax, 8
           mov eax,[SLOT_BASE+eax+APPDATA.dir_table]
           stdcall destroy_app_space, eax

           mov esi, [.slot]
           cmp [fpu_owner],esi   ; if user fpu last -> fpu user = 1
           jne @F

           mov [fpu_owner],1
           mov eax, [256+SLOT_BASE+APPDATA.fpu_state]
           clts
           bt [cpu_caps], CAPS_SSE
           jnc .no_SSE
           fxrstor [eax]
           jmp @F
.no_SSE:
           fnclex
           frstor [eax]
@@:

    mov   [KEY_COUNT],byte 0           ; empty keyboard buffer
    mov   [BTN_COUNT],byte 0           ; empty button buffer


; remove defined hotkeys
        mov     eax, hotkey_list
.loop:
        cmp     [eax+8], esi
        jnz     .cont
        mov     ecx, [eax]
        jecxz   @f
        push    dword [eax+12]
        pop     dword [ecx+12]
@@:
        mov     ecx, [eax+12]
        push    dword [eax]
        pop     dword [ecx]
        xor     ecx, ecx
        mov     [eax], ecx
        mov     [eax+4], ecx
        mov     [eax+8], ecx
        mov     [eax+12], ecx
.cont:
        add     eax, 16
        cmp     eax, hotkey_list+256*16
        jb      .loop
; remove hotkeys in buffer
        mov     eax, hotkey_buffer
.loop2:
        cmp     [eax], esi
        jnz     .cont2
        and     dword [eax+4], 0
        and     dword [eax], 0
.cont2:
        add     eax, 8
        cmp     eax, hotkey_buffer+120*8
        jb      .loop2

    mov   ecx,esi                 ; remove buttons
  bnewba2:
    mov   edi,[BTN_ADDR]
    mov   eax,edi
    cld
    movzx ebx,word [edi]
    inc   bx
  bnewba:
    dec   bx
    jz    bnmba
    add   eax,0x10
    cmp   cx,[eax]
    jnz   bnewba
    pusha
    mov   ecx,ebx
    inc   ecx
    shl   ecx,4
    mov   ebx,eax
    add   eax,0x10
    call  memmove
    dec   dword [edi]
    popa
    jmp   bnewba2
  bnmba:

    pusha     ; save window coordinates for window restoring
    cld
    shl   esi,5
    add   esi,window_data
    mov   eax,[esi+WDATA.box.left]
    mov   [dlx],eax
    add   eax,[esi+WDATA.box.width]
    mov   [dlxe],eax
    mov   eax,[esi+WDATA.box.top]
    mov   [dly],eax
    add   eax,[esi+WDATA.box.height]
    mov   [dlye],eax

    xor   eax, eax
    mov   [esi+WDATA.box.left],eax
    mov   [esi+WDATA.box.width],eax
    mov   [esi+WDATA.box.top],eax
    mov   [esi+WDATA.box.height],eax
    mov   [esi+WDATA.cl_workarea],eax
    mov   [esi+WDATA.cl_titlebar],eax
    mov   [esi+WDATA.cl_frames],eax
    mov   dword [esi+WDATA.reserved],eax ; clear all flags: wstate, redraw, wdrawn
    lea   edi, [esi-window_data+draw_data]
    mov   ecx,32/4
    rep   stosd
    popa

; debuggee test
    pushad
    mov  edi, esi
    shl  edi, 5
    mov  eax, [SLOT_BASE+edi*8+APPDATA.debugger_slot]
    test eax, eax
    jz   .nodebug
    push 8
    pop  ecx
    push dword [CURRENT_TASK+edi+TASKDATA.pid]   ; PID
    push 2
    call debugger_notify
    pop  ecx
    pop  ecx
.nodebug:
    popad

           mov ebx, [.slot]
           shl ebx, 8
           push ebx
           mov ebx,[SLOT_BASE+ebx+APPDATA.pl0_stack]

           stdcall kernel_free, ebx

           pop ebx
           mov ebx,[SLOT_BASE+ebx+APPDATA.cur_dir]
           stdcall kernel_free, ebx

           mov edi, [.slot]
           shl edi,8
           add edi,SLOT_BASE

           mov eax, [edi+APPDATA.io_map]
           cmp eax, (tss._io_map_0-OS_BASE+PG_MAP)
           je @F
           call free_page
@@:
           mov eax, [edi+APPDATA.io_map+4]
           cmp eax, (tss._io_map_1-OS_BASE+PG_MAP)
           je @F
           call free_page
@@:
           mov eax, 0x20202020
           stosd
           stosd
           stosd
           mov ecx,244/4
           xor eax, eax
           rep stosd

  ; activate window
        movzx  eax, word [WIN_STACK + esi*2]
        cmp    eax, [TASK_COUNT]
        jne    .dont_activate
        pushad
 .check_next_window:
        dec    eax
        cmp    eax, 1
        jbe    .nothing_to_activate
        lea    esi, [WIN_POS+eax*2]
        movzx  edi, word [esi]               ; edi = process
        shl    edi, 5
        cmp    [CURRENT_TASK + edi + TASKDATA.state], byte 9  ; skip dead slots
        je     .check_next_window
        add    edi, window_data
; \begin{diamond}[19.09.2006]
; skip minimized windows
        test   [edi + WDATA.fl_wstate], WSTATE_MINIMIZED
        jnz    .check_next_window
; \end{diamond}
        call   waredraw
 .nothing_to_activate:
        popad
 .dont_activate:

        push    esi     ; remove hd1 & cd & flp reservation
        shl     esi, 5
        mov     esi, [esi+CURRENT_TASK+TASKDATA.pid]
        cmp     [hd1_status], esi
        jnz     @f
        call    free_hd_channel
        mov     [hd1_status], 0
@@:
        cmp     [cd_status], esi
        jnz     @f
        call    free_cd_channel
        mov     [cd_status], 0
@@:
        cmp     [flp_status], esi
        jnz     @f
        mov     [flp_status], 0
@@:
        pop     esi
        cmp     [bgrlockpid], esi
        jnz     @f
        and     [bgrlockpid], 0
        mov     [bgrlock], 0
@@:

    pusha ; remove all irq reservations
    mov   eax,esi
    shl   eax, 5
    mov   eax,[eax+CURRENT_TASK+TASKDATA.pid]
    mov   edi,irq_owner
    mov   ecx,16
  newirqfree:
    scasd
    jne   nofreeirq
    mov   [edi-4],dword 0
  nofreeirq:
    loop   newirqfree
    popa

    pusha                     ; remove all port reservations
    mov   edx,esi
    shl   edx, 5
    add   edx,CURRENT_TASK
    mov   edx,[edx+TASKDATA.pid]

  rmpr0:

    mov   esi,[RESERVED_PORTS]

    cmp   esi,0
    je    rmpr9

  rmpr3:

    mov   edi,esi
    shl   edi,4
    add   edi,RESERVED_PORTS

    cmp   edx,[edi]
    je    rmpr4

    dec   esi
    jnz   rmpr3

    jmp   rmpr9

  rmpr4:

    mov   ecx,256
    sub   ecx,esi
    shl   ecx,4

    mov   esi,edi
    add   esi,16
    cld
    rep   movsb

    dec   dword [RESERVED_PORTS]

    jmp   rmpr0

  rmpr9:

    popa
    mov  edi,esi         ; do not run this process slot
    shl  edi, 5
    mov  [edi+CURRENT_TASK + TASKDATA.state],byte 9
; debugger test - terminate all debuggees
    mov  eax, 2
    mov  ecx, SLOT_BASE+2*0x100+APPDATA.debugger_slot
.xd0:
    cmp  eax, [TASK_COUNT]
    ja   .xd1
    cmp  dword [ecx], esi
    jnz  @f
    and  dword [ecx], 0
    pushad
    xchg eax, ecx
    mov  ebx, 2
    call sys_system
    popad
@@:
    inc  eax
    add  ecx, 0x100
    jmp  .xd0
.xd1:
;    call  systest
    sti  ; .. and life goes on

    mov   eax, [dlx]
    mov   ebx, [dly]
    mov   ecx, [dlxe]
    mov   edx, [dlye]
    call  calculatescreen
    xor   eax, eax
    xor   esi, esi
    call  redrawscreen

    mov   [MOUSE_BACKGROUND],byte 0  ; no mouse background
    mov   [DONT_DRAW_MOUSE],byte 0  ; draw mouse

    mov   [application_table_status],0
    ;mov   esi,process_terminated
    ;call  sys_msg_board_str
    DEBUGF 1,"%s",process_terminated
    add esp, 4
    ret
restore .slot

iglobal
  boot_sched_1    db   'Building gdt tss pointer',0
  boot_sched_2    db   'Building IDT table',0
endg


build_scheduler:

        mov    esi,boot_sched_1
        call   boot_log
  ;      call   build_process_gdt_tss_pointer

  ;      mov    esi,boot_sched_2
  ;      call   boot_log

        ret