kolibrios/programs/network/VNCclient/ETH.INC

672 lines
14 KiB
Plaintext
Raw Normal View History

;
; ETH.INC
;
; made by hidnplayr (hidnplayr@gmail.com) for KolibriOS
;
; The given code before every macro is only a simple example
;
;
; HISTORY
;
; v1.0: 18 august 2006 original release
; v1.1: december 2006 bugfixes and improvements
;
macro mov arg1,arg2 {
if arg1 eq arg2
else
mov arg1,arg2
end if
}
TCB_LISTEN = 1
TCB_SYN_SENT = 2
TCB_SYN_RECEIVED = 3
TCB_ESTABLISHED = 4
TCB_FIN_WAIT_1 = 5
TCB_FIN_WAIT_2 = 6
TCB_CLOSE_WAIT = 7
TCB_CLOSING = 8
TCB_LAST_ASK = 9
TCB_TIME_WAIT = 10
TCB_CLOSED = 11
PASSIVE = 0
ACTIVE = 1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; eth.get_IP eax
;
; gets the current IP that is defined in Stack (return in eax in this example)
macro eth.get_IP IP {
mov ebx,1
mov eax,52
int 0x40
mov IP ,eax
}
; eth.get_GATEWAY eax
;
; gets the current GATEWAY that is defined in Stack (return in eax in this example)
macro eth.get_GATEWAY GATEWAY {
mov ebx,9
mov eax,52
int 0x40
move GATEWAY ,eax
}
; eth.get_SUBNET eax
;
; gets the current SUBNET that is defined in Stack (return in eax in this example)
macro eth.get_SUBNET SUBNET {
mov ebx,10
mov eax,52
int 0x40
mov SUBNET ,eax
}
; eth.get_DNS eax
;
; gets the current DNS that is defined in Stack (return in eax in this example)
macro eth.get_DNS DNS {
mov ebx,13
mov eax,52
int 0x40
mov DNS ,eax
}
; eth.set_IP eax
;
; set a new IP in stack (input in eax in this example)
macro eth.set_IP IP {
mov ecx,IP
mov ebx,3
mov eax,52
int 0x40
}
; eth.set_GATEWAY eax
;
; set a new GATEWAY in stack (input in eax in this example)
macro eth.set_GATEWAY GATEWAY {
mov ecx,GATEWAY
mov ebx,11
mov eax,52
int 0x40
}
; eth.set_SUBNET eax
;
; set a new SUBNET in stack (input in eax in this example)
macro eth.set_SUBNET SUBNET {
mov ecx,SUBNET
mov ebx,12
mov eax,52
int 0x40
}
; eth.set_DNS eax
;
; set a new DNS in stack (input in eax in this example)
macro eth.set_DNS DNS {
mov ecx,DNS
mov ebx,14
mov eax,52
int 0x40
}
; eth.open eax,80,ebx,[socket]
;
; open a socket on local port in eax to port 80 on server on ebx
; the socketnumber will be returned in [socket] (dword)
macro eth.open_udp local,remote,ip,socket {
mov ecx, local
mov edx, remote
mov esi, ip
mov ebx, 0
mov eax, 53
int 0x40
mov socket,eax
}
; eth.close [socket]
;
; closes socket on socketnumber [socket]
macro eth.close_udp socket {
mov ecx, socket
mov ebx, 1
mov eax, 53
int 0x40
}
; eth.poll [socket],eax
;
; polls [socket] for data
; eax = 0 when there is data
macro eth.poll socket {
mov ecx, socket
mov ebx, 2
mov eax, 53
int 0x40
}
; eth.read_byte [socket], bl
;
; reads a byte from the socket and returns in bl
macro eth.read_byte socket, result {
mov ecx, socket
mov ebx, 3
mov eax, 53
int 0x40
mov result,bl
}
; eth.read_byte [socket], bl
;
; reads a byte from the socket and returns in bl
macro eth.read_packet socket, result {
mov edx, result
mov ecx, socket
mov ebx, 10
mov eax, 53
int 0x40
}
; eth.write [socket],12,msg
; msg db 'hello world!'
;
; send message msg to socket
macro eth.write_udp socket,length,msg,verify {
mov ecx, socket
mov edx, length
mov esi, msg
mov ebx, 4
mov eax, 53
int 0x40
if verify eq 1
call verifysend
end if
}
verifysend:
test eax,eax
jnz @f
ret
@@:
pusha
mov eax,5
mov ebx,100
int 0x40
popa
int 0x40
ret
; eth.open_tcp 80,80,eax,0,[socket]
;
; opens a tcp socket on port 80 to port 80 on IP eax with passive open
; returns socket number in eax
macro eth.open_tcp local,remote,ip,passive,socket {
mov ecx, local
mov edx, remote
mov esi, ip
mov edi, passive ; 0 = PASSIVE open
mov ebx, 5
mov eax, 53
int 0x40
mov socket,eax
}
; eth.socket_status [socket],eax
;
; returns socket status in eax
macro eth.socket_status socket,result {
mov ecx, socket
mov ebx, 6
mov eax, 53
int 0x40
mov result,eax
}
; eth.write_tcp [socket],12,msg
;
; msg db 'hello world!'
;
; send message to TCP socket
macro eth.write_tcp socket,length,msg,verify {
mov ecx, socket
mov edx, length
mov esi, msg
mov ebx, 7
mov eax, 53
int 0x40
if verify eq 1
call verifysend
end if
}
; eth.close_tcp [socket]
;
; closes tcp socket [socket]
macro eth.close_tcp socket {
mov ecx, socket
mov ebx, 8
mov eax, 53
int 0x40
}
; eth.check_port 165,eax
;
; checks if port 165 is used
; return is 0 when port is free
macro eth.check_port port,result {
mov ecx, port
mov ebx, 9
mov eax, 53
int 0x40
mov result,eax
}
; eth.status eax
;
; returns socket status in eax
macro eth.status status {
mov ebx, 255
mov ecx, 6
mov eax, 53
int 0x40
mov status,eax
}
; eth.search 165,edx
;
; searches a free local port starting from 166 (165 + 1 !)
; returns in edx
macro eth.search_port port,result {
mov edx,port
@@:
inc edx
eth.check_port edx,eax
cmp eax,0
je @r
mov result,edx
}
; eth.read_data [socket],buffer,512
; buffer rb 512
; socket dd ?
;
; reads data from socket into a buffer, stops when there is no more data or buffer is full.
macro eth.read_data socket,dest,endptr,bufferl {
local .getdata,.loop,.end
mov eax, dest
mov endptr, eax
; we have data - this will be the response
.getdata:
mov eax,endptr
cmp eax,bufferl
jg .end
eth.read_byte socket,bl
; Store the data in the response buffer
mov eax, endptr
mov [eax], bl
inc dword endptr
eth.poll socket
cmp eax,0
jne .getdata ; yes, so get it
; now we are going to wait 30 times 10 ms (300ms)
mov edx,0
.loop:
mov eax,5
mov ebx,1
int 0x40
eth.poll socket
cmp eax, 0
jne .getdata ; yes, so get it
inc edx
cmp edx,100
jl .loop
.end:
}
; eth.wait_for_data [socket],60,abort
; eth.read_data ....
; abort:
;
; Waits for data with timeout
macro eth.wait_for_data socket,TIMEOUT,abort {
mov edx,TIMEOUT
@@:
eth.poll socket
cmp eax,0
jne @f
dec edx
jz abort
mov eax,5 ; wait here for event
mov ebx,10
int 0x40
jmp @r
@@:
}
; The function 'resolve' resolves the address in edx and puts the resulting IP in eax.
; When the input is an IP-adress, the function will output this IP in eax.
; If something goes wrong, the result in eax should be 0
;
; example:
;
; resolve query1,IP,PORT
; resolve '192.168.0.1',IP,PORT
; resolve query2,IP,PORT
;
; query1 db 'www.google.com',0
; query2 db '49.78.84.45',0
; IP dd ?
; PORT dd ?
macro resolve query,result {
if query eqtype 0
mov edx,query
else
local ..string, ..label
jmp ..label
..string db query,0
..label:
mov edx,..string
end if
call __resolve
mov result,eax
}
if used __resolve
__resolve:
if __DEBUG__ eq 1
DEBUGF 1,'Resolving started\n'
end if
; This code validates if the query is an IP containing 4 numbers and 3 dots
push edx ; push edx (query address) onto stack
xor al, al ; make al (dot count) zero
@@:
cmp byte[edx],'0' ; check if this byte is a number, if not jump to no_IP
jl no_IP ;
cmp byte[edx],'9' ;
jg no_IP ;
inc edx ; the byte was a number, so lets check the next byte
cmp byte[edx],0 ; is this byte zero? (have we reached end of query?)
jz @f ; jump to next @@ then
cmp byte[edx],':'
jz @f
cmp byte[edx],'.' ; is this byte a dot?
jne @r ; if not, jump to previous @@
inc al ; the byte was a dot so increment al(dot count)
inc edx ; next byte
jmp @r ; lets check for numbers again (jump to previous @@)
@@: ; we reach this when end of query reached
cmp al,3 ; check if there where 3 dots
jnz no_IP ; if not, jump to no_IP (this is where the DNS will take over)
; The following code will convert this IP into a dword and output it in eax
; If there is also a port number specified, this will be returned in ebx, otherwise ebx is -1
pop esi ; edx (query address) was pushed onto stack and is now popped in esi
xor edx, edx ; result
xor eax, eax ; current character
xor ebx, ebx ; current byte
.outer_loop:
shl edx, 8
add edx, ebx
xor ebx, ebx
.inner_loop:
lodsb
test eax, eax
jz .finish
cmp al, '.'
jz .outer_loop
sub eax, '0'
imul ebx, 10
add ebx, eax
jmp .inner_loop
.finish:
shl edx, 8
add edx, ebx
bswap edx ; we want little endian order
mov eax, edx
ret
no_IP:
pop edx
; The query is not an IP address, we will send the query to a DNS server and hope for answer ;)
if __DEBUG__ eq 1
DEBUGF 1,'The query is no ip, Building request string from:%u\n',edx
end if
; Build the request string
mov eax, 0x00010100
mov [dnsMsg], eax
mov eax, 0x00000100
mov [dnsMsg+4], eax
mov eax, 0x00000000
mov [dnsMsg+8], eax
; domain name goes in at dnsMsg+12
mov esi, dnsMsg + 12 ; location of label length
mov edi, dnsMsg + 13 ; label start
mov ecx, 12 ; total string length so far
td002:
mov [esi], byte 0
inc ecx
td0021:
mov al, [edx]
cmp al, 0
je td001 ; we have finished the string translation
cmp al, '.'
je td004 ; we have finished the label
inc byte [esi]
inc ecx
mov [edi], al
inc edi
inc edx
jmp td0021
td004:
mov esi, edi
inc edi
inc edx
jmp td002
; write label len + label text
td001:
mov [edi], byte 0
inc ecx
inc edi
mov [edi], dword 0x01000100
add ecx, 4
mov [dnsMsgLen], ecx ; We'll need the length of the message when we send it
; Now, lets send this and wait for an answer
eth.search_port 1024,edx ; Find a free port starting from 1025 and store in edx
eth.get_DNS esi ; Read DNS IP from stack into esi
eth.open_udp edx,53,esi,[socketNum] ; First, open socket
if __DEBUG__ eq 1
DEBUGF 1,'Socket opened: %u (port %u)\n',[socketNum],ecx
end if
eth.write_udp [socketNum],[dnsMsgLen],dnsMsg ; Write to socket ( request DNS lookup )
if __DEBUG__ eq 1
DEBUGF 1,'Data written, length:%u offset:%u\n',[dnsMsgLen],dnsMsg
DEBUGF 1,'Waiting for data: (timeout is %us)\n',TIMEOUT
end if
eth.wait_for_data [socketNum],TIMEOUT,abort ; Now, we wait for data from remote
eth.read_data [socketNum],dnsMsg,[dnsMsgLen],dnsMsg+BUFFER ; Read the data into the buffer
if __DEBUG__ eq 1
DEBUGF 1,'Data received, offset:%u buffer size:%u length:%u\n',dnsMsg,BUFFER,esi-dnsMsg
end if
eth.close_udp [socketNum] ; We're done, close the socket
if __DEBUG__ eq 1
DEBUGF 1,'Closed Socket\n'
end if
; Now parse the message to get the host IP. Man, this is complicated. It's described in RFC 1035
; 1) Validate that we have an answer with > 0 responses
; 2) Find the answer record with TYPE 0001 ( host IP )
; 3) Finally, copy the IP address to the display
; Note: The response is in dnsMsg, the end of the buffer is pointed to by [dnsMsgLen]
mov esi, dnsMsg
mov al, [esi+2] ; Is this a response to my question?
and al, 0x80
cmp al, 0x80
jne abort
if __DEBUG__ eq 1
DEBUGF 1,'It was a response to my question\n'
end if
mov al, [esi+3] ; Were there any errors?
and al, 0x0F
cmp al, 0x00
jne abort
if __DEBUG__ eq 1
DEBUGF 1,'There were no errors\n'
end if
mov ax, [esi+6] ; Is there ( at least 1 ) answer?
cmp ax, 0x00
je abort
; Header validated. Scan through and get my answer
add esi, 12 ; Skip to the question field
call skipName ; Skip through the question field
add esi, 4 ; skip past the questions qtype, qclass
ctr002z:
; Now at the answer. There may be several answers, find the right one ( TYPE = 0x0001 )
call skipName
mov ax, [esi]
cmp ax, 0x0100 ; Is this the IP address answer?
jne ctr002c
add esi, 10 ; Yes! Point eax to the first byte of the IP address
mov eax,[esi]
ret
ctr002c: ; Skip through the answer, move to the next
add esi, 8
movzx eax, byte [esi+1]
mov ah, [esi]
add esi, eax
add esi, 2
cmp esi, [dnsMsgLen] ; Have we reached the end of the msg? This is an error condition, should not happen
jl ctr002z ; Check next answer
abort:
if __DEBUG__ eq 1
DEBUGF 1,'Something went wrong, aborting\n'
end if
xor eax,eax
ret
skipName:
; Increment esi to the first byte past the name field
; Names may use compressed labels. Normally do.
; RFC 1035 page 30 gives details
mov al, [esi]
cmp al, 0
je sn_exit
and al, 0xc0
cmp al, 0xc0
je sn001
movzx eax, byte [esi]
inc eax
add esi, eax
jmp skipName
sn001:
add esi, 2 ; A pointer is always at the end
ret
sn_exit:
inc esi
ret
dnsMsgLen: dd 0
socketNum: dd 0xFFFF
if ~defined dnsMsg
dnsMsg: rb BUFFER
end if
end if