kolibrios/kernel/branches/Kolibri-acpi/network/eth_drv/drivers/3c59x.inc

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                              ;;
;; Copyright (C) KolibriOS team 2004-2011. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License    ;;
;;                                                              ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

$Revision$


;; Copyright (c) 2004, Endre Kozma <endre.kozma@axelero.hu>
;; All rights reserved.
;;
;; Redistribution  and  use  in  source  and  binary  forms, with or without
;; modification, are permitted provided  that  the following  conditions are
;; met:
;;
;; 1. Redistributions of source code must retain the above  copyright notice,
;;    this list of conditions and the following disclaimer.
;;
;; 2. Redistributions  in  binary form  must  reproduce  the above copyright
;;    notice, this  list of conditions  and the  following disclaimer in the
;;    documentation and/or other  materials  provided with  the distribution.
;;
;; 3. The name of the author may not be used to  endorse or promote products
;;    derived from this software without  specific prior  written permission.
;;
;; THIS SOFTWARE IS  PROVIDED  BY  THE  AUTHOR  ``AS IS'' AND ANY EXPRESS OR
;; IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
;; OF  MERCHANTABILITY AND FITNESS  FOR A PARTICULAR  PURPOSE ARE DISCLAIMED.
;; IN  NO  EVENT  SHALL  THE  AUTHOR  BE  LIABLE  FOR  ANY  DIRECT, INDIRECT,
;; INCIDENTAL, SPECIAL, EXEMPLARY, OR  CONSEQUENTIAL DAMAGES (INCLUDING, BUT
;; NOT LIMITED TO, PROCUREMENT OF  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
;; DATA, OR  PROFITS; OR  BUSINESS  INTERRUPTION)  HOWEVER CAUSED AND ON ANY
;; THEORY OF  LIABILITY, WHETHER IN  CONTRACT,  STRICT  LIABILITY,  OR  TORT
;; (INCLUDING NEGLIGENCE OR OTHERWISE)  ARISING IN ANY WAY OUT OF THE USE OF
;; THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                                         ;;
;;  3C59X.INC                                                              ;;
;;                                                                         ;;
;;  Ethernet driver for Menuet OS                                          ;;
;;                                                                         ;;
;;  Driver for 3Com fast etherlink 3c59x and                               ;;
;;         etherlink XL 3c900 and 3c905 cards                              ;;
;;  References:                                                            ;;
;;    www.3Com.com - data sheets                                           ;;
;;    DP83840A.pdf - ethernet physical layer                               ;;
;;    3c59x.c - linux driver                                               ;;
;;    ethernet driver template by Mike Hibbett                             ;;
;;                                                                         ;;
;;  Credits                                                                ;;
;;   Mike Hibbett,                                                         ;;
;;         who kindly supplied me with a 3Com905C-TX-M card                ;;
;;                                                                         ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;  History
;;  =======
;;  $Log: 3C59X.INC,v $
;;  Revision 1.3  2004/07/11 12:21:12  kozma
;;  Support of vortex chips (3c59x) added.
;;  Support of 3c920 and 3c982 added.
;;  Corrections.
;;
;;  Revision 1.2  2004/06/12 19:40:20  kozma
;;  Function e3c59x_set_available_media added in order to set
;;  the default media in case auto detection finds no valid link.
;;  Incorrect mii check removed (3c900 Cyclone works now).
;;  Cleanups.
;;
;;  Revision 1.1  2004/06/12 18:27:15  kozma
;;  Initial revision
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; comment the next line out if you don't want debug info printed
; on the debug board. This option adds a lot of bytes to the driver
; so it's worth to comment it out.
;        E3C59X_DEBUG    equ 1

; forcing full duplex mode makes sense at some cards and link types
        E3C59X_FORCE_FD equ 1

macro virt_to_dma reg
{
        sub     reg, OS_BASE
}

macro dma_to_virt reg
{
        add     reg, OS_BASE
}

macro zero_to_virt reg
{

}

macro virt_to_zero reg
{

}

macro zero_to_dma reg
{
        sub     reg, OS_BASE
}

macro dma_to_zero reg
{
        add     reg, OS_BASE
}

macro strtbl name, [string]
{
common
        label name dword
forward
        local label
        dd label
forward
        label db string, 0
}

; Ethernet frame symbols
        ETH_ALEN                       equ 6
        ETH_HLEN                       equ (2*ETH_ALEN+2)
        ETH_ZLEN                       equ 60 ; 60 + 4bytes auto payload for
                                              ; mininmum 64bytes frame length
; PCI programming
        PCI_REG_COMMAND                equ 0x4 ; command register
        PCI_REG_STATUS                 equ 0x6 ; status register
        PCI_REG_LATENCY                equ 0xd ; latency timer register
        PCI_REG_CAP_PTR                equ 0x34 ; capabilities pointer
        PCI_REG_CAPABILITY_ID          equ 0x0 ; capapility ID in pm register block
        PCI_REG_PM_STATUS              equ 0x4 ; power management status register
        PCI_REG_PM_CTRL                equ 0x4 ; power management control register
        PCI_BIT_PIO                    equ 0 ; bit0: io space control
        PCI_BIT_MMIO                   equ 1 ; bit1: memory space control
        PCI_BIT_MASTER                 equ 2 ; bit2: device acts as a PCI master
; Registers
        E3C59X_REG_POWER_MGMT_CTRL     equ 0x7c
        E3C59X_REG_UP_LIST_PTR         equ 0x38
        E3C59X_REG_UP_PKT_STATUS       equ 0x30
        E3C59X_REG_TX_FREE_THRESH      equ 0x2f
        E3C59X_REG_DN_LIST_PTR         equ 0x24
        E3C59X_REG_DMA_CTRL            equ 0x20
        E3C59X_REG_TX_STATUS           equ 0x1b
        E3C59X_REG_RX_STATUS           equ 0x18
        E3C59X_REG_TX_DATA             equ 0x10
; Common window registers
        E3C59X_REG_INT_STATUS          equ 0xe
        E3C59X_REG_COMMAND             equ 0xe
; Register window 7
        E3C59X_REG_MASTER_STATUS       equ 0xc
        E3C59X_REG_POWER_MGMT_EVENT    equ 0xc
        E3C59X_REG_MASTER_LEN          equ 0x6
        E3C59X_REG_VLAN_ETHER_TYPE     equ 0x4
        E3C59X_REG_VLAN_MASK           equ 0x0
        E3C59X_REG_MASTER_ADDRESS      equ 0x0
; Register window 6
        E3C59X_REG_BYTES_XMITTED_OK    equ 0xc
        E3C59X_REG_BYTES_RCVD_OK       equ 0xa
        E3C59X_REG_UPPER_FRAMES_OK     equ 0x9
        E3C59X_REG_FRAMES_DEFERRED     equ 0x8
        E3C59X_REG_FRAMES_RCVD_OK      equ 0x7
        E3C59X_REG_FRAMES_XMITTED_OK   equ 0x6
        E3C59X_REG_RX_OVERRUNS         equ 0x5
        E3C59X_REG_LATE_COLLISIONS     equ 0x4
        E3C59X_REG_SINGLE_COLLISIONS   equ 0x3
        E3C59X_REG_MULTIPLE_COLLISIONS equ 0x2
        E3C59X_REG_SQE_ERRORS          equ 0x1
        E3C59X_REG_CARRIER_LOST        equ 0x0
; Register window 5
        E3C59X_REG_INDICATION_ENABLE   equ 0xc
        E3C59X_REG_INTERRUPT_ENABLE    equ 0xa
        E3C59X_REG_TX_RECLAIM_THRESH   equ 0x9
        E3C59X_REG_RX_FILTER           equ 0x8
        E3C59X_REG_RX_EARLY_THRESH     equ 0x6
        E3C59X_REG_TX_START_THRESH     equ 0x0
; Register window 4
        E3C59X_REG_UPPER_BYTES_OK      equ 0xe
        E3C59X_REG_BAD_SSD             equ 0xc
        E3C59X_REG_MEDIA_STATUS        equ 0xa
        E3C59X_REG_PHYSICAL_MGMT       equ 0x8
        E3C59X_REG_NETWORK_DIAGNOSTIC  equ 0x6
        E3C59X_REG_FIFO_DIAGNOSTIC     equ 0x4
        E3C59X_REG_VCO_DIAGNOSTIC      equ 0x2 ; may not supported
; Bits in register window 4
        E3C59X_BIT_AUTOSELECT          equ 24
; Register window 3
        E3C59X_REG_TX_FREE             equ 0xc
        E3C59X_REG_RX_FREE             equ 0xa
        E3C59X_REG_MEDIA_OPTIONS       equ 0x8
        E3C59X_REG_MAC_CONTROL         equ 0x6
        E3C59X_REG_MAX_PKT_SIZE        equ 0x4
        E3C59X_REG_INTERNAL_CONFIG     equ 0x0
; Register window 2
        E3C59X_REG_RESET_OPTIONS       equ 0xc
        E3C59X_REG_STATION_MASK_HI     equ 0xa
        E3C59X_REG_STATION_MASK_MID    equ 0x8
        E3C59X_REG_STATION_MASK_LO     equ 0x6
        E3C59X_REG_STATION_ADDRESS_HI  equ 0x4
        E3C59X_REG_STATION_ADDRESS_MID equ 0x2
        E3C59X_REG_STATION_ADDRESS_LO  equ 0x0
; Register window 1
        E3C59X_REG_TRIGGER_BITS        equ 0xc
        E3C59X_REG_SOS_BITS            equ 0xa
        E3C59X_REG_WAKE_ON_TIMER       equ 0x8
        E3C59X_REG_SMB_RXBYTES         equ 0x7
        E3C59X_REG_SMB_DIAG            equ 0x5
        E3C59X_REG_SMB_ARB             equ 0x4
        E3C59X_REG_SMB_STATUS          equ 0x2
        E3C59X_REG_SMB_ADDRESS         equ 0x1
        E3C59X_REG_SMB_FIFO_DATA       equ 0x0
; Register window 0
        E3C59X_REG_EEPROM_DATA         equ 0xc
        E3C59X_REG_EEPROM_COMMAND      equ 0xa
        E3C59X_REG_BIOS_ROM_DATA       equ 0x8
        E3C59X_REG_BIOS_ROM_ADDR       equ 0x4
; Physical management bits
        E3C59X_BIT_MGMT_DIR            equ 2 ; drive with the data written in mgmtData
        E3C59X_BIT_MGMT_DATA           equ 1 ; MII management data bit
        E3C59X_BIT_MGMT_CLK            equ 0 ; MII management clock
; MII commands
        E3C59X_MII_CMD_MASK            equ (1111b shl 10)
        E3C59X_MII_CMD_READ            equ (0110b shl 10)
        E3C59X_MII_CMD_WRITE           equ (0101b shl 10)
; MII registers
        E3C59X_REG_MII_BMCR            equ 0 ; basic mode control register
        E3C59X_REG_MII_BMSR            equ 1 ; basic mode status register
        E3C59X_REG_MII_ANAR            equ 4 ; auto negotiation advertisement register
        E3C59X_REG_MII_ANLPAR          equ 5 ; auto negotiation link partner ability register
        E3C59X_REG_MII_ANER            equ 6 ; auto negotiation expansion register
; MII bits
        E3C59X_BIT_MII_AUTONEG_COMPLETE     equ 5 ; auto-negotiation complete
        E3C59X_BIT_MII_PREAMBLE_SUPPRESSION equ 6
; eeprom bits and commands
        E3C59X_EEPROM_CMD_READ         equ 0x80
        E3C59X_EEPROM_BIT_BUSY         equ 15
; eeprom registers
        E3C59X_EEPROM_REG_OEM_NODE_ADDR equ 0xa
        E3C59X_EEPROM_REG_CAPABILITIES  equ 0x10
; Commands for command register
        E3C59X_SELECT_REGISTER_WINDOW  equ (1 shl 11)

        IS_VORTEX                      equ 0x1
        IS_BOOMERANG                   equ 0x2
        IS_CYCLONE                     equ 0x4
        IS_TORNADO                     equ 0x8
        EEPROM_8BIT                    equ 0x10
        HAS_PWR_CTRL                   equ 0x20
        HAS_MII                        equ 0x40
        HAS_NWAY                       equ 0x80
        HAS_CB_FNS                     equ 0x100
        INVERT_MII_PWR                 equ 0x200
        INVERT_LED_PWR                 equ 0x400
        MAX_COLLISION_RESET            equ 0x800
        EEPROM_OFFSET                  equ 0x1000
        HAS_HWCKSM                     equ 0x2000
        EXTRA_PREAMBLE                 equ 0x4000

iglobal
        align 4
e3c59x_hw_versions:
        dw 0x5900, IS_VORTEX ; 3c590 Vortex 10Mbps
        dw 0x5920, IS_VORTEX ; 3c592 EISA 10Mbps Demon/Vortex
        dw 0x5970, IS_VORTEX ; 3c597 EISA Fast Demon/Vortex
        dw 0x5950, IS_VORTEX ; 3c595 Vortex 100baseTx
        dw 0x5951, IS_VORTEX ; 3c595 Vortex 100baseT4
        dw 0x5952, IS_VORTEX ; 3c595 Vortex 100base-MII
        dw 0x9000, IS_BOOMERANG ; 3c900 Boomerang 10baseT
        dw 0x9001, IS_BOOMERANG ; 3c900 Boomerang 10Mbps Combo
        dw 0x9004, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM ; 3c900 Cyclone 10Mbps TPO
        dw 0x9005, IS_CYCLONE or HAS_HWCKSM ; 3c900 Cyclone 10Mbps Combo
        dw 0x9006, IS_CYCLONE or HAS_HWCKSM ; 3c900 Cyclone 10Mbps TPC
        dw 0x900A, IS_CYCLONE or HAS_HWCKSM ; 3c900B-FL Cyclone 10base-FL
        dw 0x9050, IS_BOOMERANG or HAS_MII ; 3c905 Boomerang 100baseTx
        dw 0x9051, IS_BOOMERANG or HAS_MII ; 3c905 Boomerang 100baseT4
        dw 0x9055, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM or EXTRA_PREAMBLE ; 3c905B Cyclone 100baseTx
        dw 0x9058, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM ; 3c905B Cyclone 10/100/BNC
        dw 0x905A, IS_CYCLONE or HAS_HWCKSM ; 3c905B-FX Cyclone 100baseFx
        dw 0x9200, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c905C Tornado
        dw 0x9800, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM ; 3c980 Cyclone
        dw 0x9805, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c982 Dual Port Server Cyclone
        dw 0x7646, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM ; 3cSOHO100-TX Hurricane
        dw 0x5055, IS_CYCLONE or EEPROM_8BIT or HAS_HWCKSM ; 3c555 Laptop Hurricane
        dw 0x6055, IS_TORNADO or HAS_NWAY or EEPROM_8BIT or HAS_CB_FNS \
        or      INVERT_MII_PWR or HAS_HWCKSM                  ; 3c556 Laptop Tornado
        dw 0x6056, IS_TORNADO or HAS_NWAY or EEPROM_OFFSET or HAS_CB_FNS \
        or      INVERT_MII_PWR or HAS_HWCKSM                  ; 3c556B Laptop Hurricane
        dw 0x5b57, IS_BOOMERANG or HAS_MII or EEPROM_8BIT ; 3c575 [Megahertz] 10/100 LAN CardBus
        dw 0x5057, IS_BOOMERANG or HAS_MII or EEPROM_8BIT ; 3c575 Boomerang CardBus
        dw 0x5157, IS_CYCLONE or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT \
        or      INVERT_LED_PWR or HAS_HWCKSM                  ; 3CCFE575BT Cyclone CardBus
        dw 0x5257, IS_TORNADO or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT or INVERT_MII_PWR \
        or      MAX_COLLISION_RESET or HAS_HWCKSM                  ; 3CCFE575CT Tornado CardBus
        dw 0x6560, IS_CYCLONE or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT or INVERT_MII_PWR \
        or      INVERT_LED_PWR or HAS_HWCKSM                  ; 3CCFE656 Cyclone CardBus
        dw 0x6562, IS_CYCLONE or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT or INVERT_MII_PWR \
        or      INVERT_LED_PWR or HAS_HWCKSM                  ; 3CCFEM656B Cyclone+Winmodem CardBus
        dw 0x6564, IS_TORNADO or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT or INVERT_MII_PWR \
        or      MAX_COLLISION_RESET or HAS_HWCKSM                  ; 3CXFEM656C Tornado+Winmodem CardBus
        dw 0x4500, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c450 HomePNA Tornado
        dw 0x9201, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c920 Tornado
        dw 0x1201, IS_TORNADO or HAS_HWCKSM or HAS_NWAY ; 3c982 Hydra Dual Port A
        dw 0x1202, IS_TORNADO or HAS_HWCKSM or HAS_NWAY ; 3c982 Hydra Dual Port B
        dw 0x9056, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM or EXTRA_PREAMBLE ; 3c905B-T4
        dw 0x9210, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c920B-EMB-WNM Tornado
E3C59X_HW_VERSIONS_SIZE= $-e3c59x_hw_versions
endg

; RX/TX buffers sizes
        E3C59X_MAX_ETH_PKT_SIZE      equ 1536 ; max packet size
        E3C59X_NUM_RX_DESC           equ 4 ; a power of 2 number
        E3C59X_NUM_TX_DESC           equ 4 ; a power of 2 number
        E3C59X_RX_BUFFER_SIZE        equ (E3C59X_MAX_ETH_FRAME_SIZE*E3C59X_NUM_RX_DESC)
        E3C59X_TX_BUFFER_SIZE        equ (E3C59X_MAX_ETH_FRAME_SIZE*E3C59X_NUM_TX_DESC)
; Download Packet Descriptor
        E3C59X_DPD_DN_NEXT_PTR       equ 0
        E3C59X_DPD_FRAME_START_HDR   equ 4
        E3C59X_DPD_DN_FRAG_ADDR      equ 8 ; for packet data
        E3C59X_DPD_DN_FRAG_LEN       equ 12 ; for packet data
        E3C59X_DPD_SIZE              equ 16 ; a power of 2 number
; Upload Packet Descriptor
        E3C59X_UPD_UP_NEXT_PTR       equ 0
        E3C59X_UPD_PKT_STATUS        equ 4
        E3C59X_UPD_UP_FRAG_ADDR      equ 8 ; for packet data
        E3C59X_UPD_UP_FRAG_LEN       equ 12 ; for packet data
        E3C59X_UPD_SIZE              equ 16

; RX/TX buffers
if defined E3C59X_LINUX
        E3C59X_MAX_ETH_FRAME_SIZE = 160 ; size of ethernet frame + bytes alignment
        e3c59x_rx_buff = 0
else
        E3C59X_MAX_ETH_FRAME_SIZE = 1520 ; size of ethernet frame + bytes alignment
        e3c59x_rx_buff = eth_data_start
end if

        e3c59x_tx_buff = e3c59x_rx_buff+E3C59X_RX_BUFFER_SIZE
        e3c59x_dpd_buff = e3c59x_tx_buff+E3C59X_TX_BUFFER_SIZE
        e3c59x_upd_buff = e3c59x_dpd_buff+(E3C59X_DPD_SIZE*E3C59X_NUM_TX_DESC)

uglobal
e3c59x_curr_upd:
                 dd 0
e3c59x_prev_dpd:
                 dd 0
e3c59x_prev_tx_frame:
                      dd 0
e3c59x_transmit_function:
                          dd 0
e3c59x_receive_function:
                         dd 0
endg

iglobal
e3c59x_ver_id:
               db 17
endg

uglobal
e3c59x_full_bus_master:
                        db 0
e3c59x_has_hwcksm:
                    db 0
e3c59x_preamble:
                 db 0
e3c59x_dn_list_ptr_cleared:
                            db 0
e3c59x_self_directed_packet:
                             rb 6
endg

if defined E3C59X_DEBUG
e3c59x_hw_type_str:
                    db "Detected hardware type  : ", 0
e3c59x_device_str:
                   db  "Device ID               : 0x"
e3c59x_device_id_str:
                      db "ffff", 13, 10, 0
e3c59x_vendor_str:
                   db  "Vendor ID               : 0x"
e3c59x_vendor_id_str:
                      db "ffff", 13, 10, 0
e3c59x_io_info_str:
                    db "IO address              : 0x"
e3c59x_io_addr_str:
                    db "ffff", 13, 10, 0
e3c59x_mac_info_str:
                     db "MAC address             : "
e3c59x_mac_addr_str:
                     db "ff:ff:ff:ff:ff:ff", 13, 10, 0
e3c59x_boomerang_str:
                      db " (boomerang)", 13, 10, 0
e3c59x_vortex_str:
                   db " (vortex)", 13, 10, 0
e3c59x_link_type_str:
                      db "Established link type   : ", 0
e3c59x_new_line_str:
                     db 13, 10, 0
e3c59x_link_type:
                  dd 0

e3c59x_charset:
                db '0123456789abcdef'

strtbl e3c59x_link_str, \
        "No valid link type detected", \
        "10BASE-T half duplex", \
        "10BASE-T full-duplex", \
        "100BASE-TX half duplex", \
        "100BASE-TX full duplex", \
        "100BASE-T4", \
        "100BASE-FX", \
        "10Mbps AUI", \
        "10Mbps COAX (BNC)", \
        "miiDevice - not supported"

strtbl e3c59x_hw_str, \
        "3c590 Vortex 10Mbps", \
        "3c592 EISA 10Mbps Demon/Vortex", \
        "3c597 EISA Fast Demon/Vortex", \
        "3c595 Vortex 100baseTx", \
        "3c595 Vortex 100baseT4", \
        "3c595 Vortex 100base-MII", \
        "3c900 Boomerang 10baseT", \
        "3c900 Boomerang 10Mbps Combo", \
        "3c900 Cyclone 10Mbps TPO", \
        "3c900 Cyclone 10Mbps Combo", \
        "3c900 Cyclone 10Mbps TPC", \
        "3c900B-FL Cyclone 10base-FL", \
        "3c905 Boomerang 100baseTx", \
        "3c905 Boomerang 100baseT4", \
        "3c905B Cyclone 100baseTx", \
        "3c905B Cyclone 10/100/BNC", \
        "3c905B-FX Cyclone 100baseFx", \
        "3c905C Tornado", \
        "3c980 Cyclone", \
        "3c982 Dual Port Server Cyclone", \
        "3cSOHO100-TX Hurricane", \
        "3c555 Laptop Hurricane", \
        "3c556 Laptop Tornado", \
        "3c556B Laptop Hurricane", \
        "3c575 [Megahertz] 10/100 LAN CardBus", \
        "3c575 Boomerang CardBus", \
        "3CCFE575BT Cyclone CardBus", \
        "3CCFE575CT Tornado CardBus", \
        "3CCFE656 Cyclone CardBus", \
        "3CCFEM656B Cyclone+Winmodem CardBus", \
        "3CXFEM656C Tornado+Winmodem CardBus", \
        "3c450 HomePNA Tornado", \
        "3c920 Tornado", \
        "3c982 Hydra Dual Port A", \
        "3c982 Hydra Dual Port B", \
        "3c905B-T4", \
        "3c920B-EMB-WNM Tornado"

end if ; defined E3C59X_DEBUG

;***************************************************************************
;   Function
;      e3c59x_debug
;   Description
;      prints debug info to the debug board
;   Parameters
;      ebp - io_addr
;   Return value
;   Destroyed registers
;      eax, ebx, ecx, edx, edi, esi
;
;***************************************************************************
if defined E3C59X_DEBUG
        align 4
e3c59x_debug:
        pushad
; print device type
        mov     esi, e3c59x_hw_type_str
        call    sys_msg_board_str
        movzx   ecx, byte [e3c59x_ver_id]
        mov     esi, [e3c59x_hw_str+ecx*4]
        call    sys_msg_board_str
        mov     esi, e3c59x_boomerang_str
        cmp     dword [e3c59x_transmit_function], e3c59x_boomerang_transmit
        jz      .boomerang
        mov     esi, e3c59x_vortex_str
.boomerang:
        call    sys_msg_board_str
; print device/vendor
        mov     ax, [pci_data+2]
        mov     cl, 2
        mov     ebx, e3c59x_device_id_str
        call    e3c59x_print_hex
        mov     esi, e3c59x_device_str
        call    sys_msg_board_str
        mov     ax, [pci_data]
        mov     cl, 2
        mov     ebx, e3c59x_vendor_id_str
        call    e3c59x_print_hex
        mov     esi, e3c59x_vendor_str
        call    sys_msg_board_str
; print io address
        mov     ax, [io_addr]
        mov     ebx, e3c59x_io_addr_str
        mov     cl, 2
        call    e3c59x_print_hex
        mov     esi, e3c59x_io_info_str
        call    sys_msg_board_str
; print MAC address
        mov     ebx, e3c59x_mac_addr_str
        xor     ecx, ecx
.mac_loop:
        push    ecx
        mov     al, [node_addr+ecx]
        mov     cl, 1
        call    e3c59x_print_hex
        inc     ebx
        pop     ecx
        inc     cl
        cmp     cl, 6
        jne     .mac_loop
        mov     esi, e3c59x_mac_info_str
        call    sys_msg_board_str
; print link type
        mov     esi, e3c59x_link_type_str
        call    sys_msg_board_str
        xor     eax, eax
        bsr     ax, word [e3c59x_link_type]
        jz      @f
        sub     ax, 4
@@:
        mov     esi, [e3c59x_link_str+eax*4]
        call    sys_msg_board_str
        mov     esi, e3c59x_new_line_str
        call    sys_msg_board_str
        popad
        ret

;***************************************************************************
;   Function
;      e3c59x_print_hex
;   Description
;      prints a hexadecimal value
;   Parameters
;      eax - value to be printed out
;      ebx - where to print
;       cl - value size (1, 2, 4)
;   Return value
;      ebx - end address after the print
;   Destroyed registers
;      eax, ebx
;
;***************************************************************************
        align 4
e3c59x_print_hex:
        cmp     cl, 1
        je      .print_byte
        cmp     cl, 2
        jz      .print_word
.print_dword:
        push    eax
        bswap   eax
        xchg    ah, al
        call    .print_word
        pop     eax
.print_word:
        push    eax
        xchg    ah, al
        call    .print_byte
        pop     eax
.print_byte:
        movzx   eax, al
        push    eax
        and     al, 0xf0
        shr     al, 4
        mov     al, byte [eax+e3c59x_charset]
        mov     [ebx], al
        inc     ebx
        pop     eax
        and     al, 0x0f
        mov     al, byte [eax+e3c59x_charset]
        mov     [ebx], al
        inc     ebx
        ret
end if ; defined E3C59X_DEBUG

;***************************************************************************
;   Function
;      e3c59x_try_link_detect
;   Description
;      e3c59x_try_link_detect checks if link exists
;   Parameters
;      ebp - io_addr
;   Return value
;      al - 0 ; no link detected
;      al - 1 ; link detected
;   Destroyed registers
;      eax, ebx, ecx, edx, edi, esi
;
;***************************************************************************
        align 4
e3c59x_try_link_detect:
; download self-directed packet
        mov     edi, node_addr
        mov     bx, 0x0608 ; packet type
        mov     esi, e3c59x_self_directed_packet
        mov     ecx, 6 ; 6 + 6 + 2 + 6 = 20 bytes
        call    dword [e3c59x_transmit_function]
; switch to register window 5
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+5
        out     dx, ax
; program RxFilter for promiscuous operation
        mov     ax, (10000b shl 11)
        lea     edx, [ebp+E3C59X_REG_RX_FILTER]
        in      al, dx
        or      al, 1111b
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        out     dx, ax
; switch to register window 4
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+4
        out     dx, ax
; check loop
        xor     ebx, ebx
        mov     ecx, 0xffff ; 65535 tries
.loop:
        push    ecx ebx
        call    dword [e3c59x_receive_function]
        pop     ebx ecx
        test    al, al
        jnz     .finish
.no_packet_received:
; switch to register window 4
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+4
        out     dx, ax
; read linkbeatdetect
        lea     edx, [ebp+E3C59X_REG_MEDIA_STATUS]
        in      ax, dx
        test    ah, 1000b ; test linkBeatDetect
        jnz     .link_detected
        xor     al, al
        jmp     .finish
.link_detected:
; test carrierSense
        test    al, 100000b
        jz      .no_carrier_sense
        inc     ebx
.no_carrier_sense:
        dec     ecx
        jns     .loop
; assume the link is good if 0 < ebx < 25 %
        test    ebx, ebx
        setnz   al
        jz      .finish
        cmp     ebx, 16384 ; 25%
        setb    al
.finish:
if defined E3C59X_DEBUG
        test    al, al
        jz      @f
        or      byte [e3c59x_link_type+1], 100b
@@:
end if ; defined E3C59X_DEBUG
        ret

;***************************************************************************
;   Function
;      e3c59x_try_phy
;   Description
;      e3c59x_try_phy checks the auto-negotiation function
;      in the PHY at PHY index. It can also be extended to
;      include link detection for non-IEEE 802.3u
;      auto-negotiation devices, for instance the BCM5000.
;   Parameters
;       ah - PHY index
;      ebp - io_addr
;   Return value
;      al - 0 link is auto-negotiated
;      al - 1 no link is auto-negotiated
;   Destroyed registers
;       eax, ebx, ecx, edx, esi
;
;***************************************************************************
        align 4
e3c59x_try_phy:
        mov     al, E3C59X_REG_MII_BMCR
        push    eax
        call    e3c59x_mdio_read ; returns with window #4
        or      ah, 0x80 ; software reset
        mov     ebx, eax
        pop     eax
        push    eax
        call    e3c59x_mdio_write ; returns with window #4
; wait for reset to complete
        mov     esi, 2000 ; 2000ms = 2s
        call    delay_ms
        pop     eax
        push    eax
        call    e3c59x_mdio_read ; returns with window #4
        test    ah, 0x80
        jnz     .fail_finish
        pop     eax
        push    eax
; wait for a while after reset
        mov     esi, 20 ; 20ms
        call    delay_ms
        pop     eax
        push    eax
        mov     al, E3C59X_REG_MII_BMSR
        call    e3c59x_mdio_read ; returns with window #4
        test    al, 1 ; extended capability supported?
        jz      .no_ext_cap
; auto-neg capable?
        test    al, 1000b
        jz      .fail_finish ; not auto-negotiation capable
; auto-neg complete?
        test    al, 100000b
        jnz     .auto_neg_ok
; restart auto-negotiation
        pop     eax
        push    eax
        mov     al, E3C59X_REG_MII_ANAR
        push    eax
        call    e3c59x_mdio_read ; returns with window #4
        or      ax, (1111b shl 5) ; advertise only 10base-T and 100base-TX
        mov     ebx, eax
        pop     eax
        call    e3c59x_mdio_write ; returns with window #4
        pop     eax
        push    eax
        call    e3c59x_mdio_read ; returns with window #4
        mov     ebx, eax
        or      bh, 10010b ; restart auto-negotiation
        pop     eax
        push    eax
        call    e3c59x_mdio_write ; returns with window #4
        mov     esi, 4000 ; 4000ms = 4 seconds
        call    delay_ms
        pop     eax
        push    eax
        mov     al, E3C59X_REG_MII_BMSR
        call    e3c59x_mdio_read ; returns with window #4
        test    al, 100000b ; auto-neg complete?
        jnz     .auto_neg_ok
        jmp     .fail_finish
.auto_neg_ok:
; compare advertisement and link partner ability registers
        pop     eax
        push    eax
        mov     al, E3C59X_REG_MII_ANAR
        call    e3c59x_mdio_read ; returns with window #4
        xchg    eax, [esp]
        mov     al, E3C59X_REG_MII_ANLPAR
        call    e3c59x_mdio_read ; returns with window #4
        pop     ebx
        and     eax, ebx
        and     eax, 1111100000b
        push    eax
if defined E3C59X_DEBUG
        mov     word [e3c59x_link_type], ax
end if ; defined E3C59X_DEBUG
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
; set full-duplex mode
        lea     edx, [ebp+E3C59X_REG_MAC_CONTROL]
        in      ax, dx
        and     ax, not 0x120 ; clear full duplex and flow control
        pop     ebx
        test    ebx, (1010b shl 5) ; check for full-duplex
        jz      .half_duplex
        or      ax, 0x120 ; set full duplex and flow control
.half_duplex:
        out     dx, ax
        mov     al, 1
        ret
.no_ext_cap:
; not yet implemented BCM5000
.fail_finish:
        pop     eax
        xor     al, al
        ret

;***************************************************************************
;   Function
;      e3c59x_try_mii
;   Description
;      e3c59x_try_MII checks the on-chip auto-negotiation logic
;      or an off-chip MII PHY, depending upon what is set in
;      xcvrSelect by the caller.
;      It exits when it finds the first device with a good link.
;   Parameters
;      ebp - io_addr
;   Return value
;      al - 0
;      al - 1
;   Destroyed registers
;      eax, ebx, ecx, edx, esi
;
;***************************************************************************
        align 4
e3c59x_try_mii:
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
        lea     edx, [ebp+E3C59X_REG_INTERNAL_CONFIG]
        in      eax, dx
        and     eax, (1111b shl 20)
        cmp     eax, (1000b shl 20) ; is auto-negotiation set?
        jne     .mii_device
; auto-negotiation is set
; switch to register window 4
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+4
        out     dx, ax
; PHY==24 is the on-chip auto-negotiation logic
; it supports only 10base-T and 100base-TX
        mov     ah, 24
        call    e3c59x_try_phy
        test    al, al
        jz      .fail_finish
        mov     cl, 24
        jmp     .check_preamble
.mii_device:
        cmp     eax, (0110b shl 20)
        jne     .fail_finish
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+4
        out     dx, ax
        lea     edx, [ebp+E3C59X_REG_PHYSICAL_MGMT]
        in      ax, dx
        and     al, (1 shl E3C59X_BIT_MGMT_DIR) or (1 shl E3C59X_BIT_MGMT_DATA)
        cmp     al, (1 shl E3C59X_BIT_MGMT_DATA)
        je      .serch_for_phy
        xor     al, al
        ret
.serch_for_phy:
; search for PHY
        mov     cl, 31
.search_phy_loop:
        cmp     cl, 24
        je      .next_phy
        mov     ah, cl ; ah = phy
        mov     al, E3C59X_REG_MII_BMCR ; al = Basic Mode Status Register
        push    ecx
        call    e3c59x_mdio_read
        pop     ecx
        test    ax, ax
        jz      .next_phy
        cmp     ax, 0xffff
        je      .next_phy
        mov     ah, cl ; ah = phy
        push    ecx
        call    e3c59x_try_phy
        pop     ecx
        test    al, al
        jnz     .check_preamble
.next_phy:
        dec     cl
        jns     .search_phy_loop
.fail_finish:
        xor     al, al
        ret
; epilog
.check_preamble:
        push    eax ; eax contains the return value of e3c59x_try_phy
; check hard coded preamble forcing
        movzx   eax, byte [e3c59x_ver_id]
        test    word [eax*4+e3c59x_hw_versions+2], EXTRA_PREAMBLE
        setnz   [e3c59x_preamble] ; force preamble
        jnz     .finish
; check mii for preamble suppression
        mov     ah, cl
        mov     al, E3C59X_REG_MII_BMSR
        call    e3c59x_mdio_read
        test    al, 1000000b ; preamble suppression?
        setz    [e3c59x_preamble] ; no
.finish:
        pop     eax
        ret

;***************************************************************************
;   Function
;      e3c59x_test_packet
;   Description
;      e3c59x_try_loopback try a loopback packet for 10BASE2 or AUI port
;   Parameters
;      ebp - io_addr
;   Return value
;      al - 0
;      al - 1
;   Destroyed registers
;      eax, ebx, ecx, edx, edi, esi
;
;***************************************************************************
        align 4
e3c59x_test_packet:
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
; set fullDuplexEnable in MacControl register
        lea     edx, [ebp+E3C59X_REG_MAC_CONTROL]
        in      ax, dx
        or      ax, 0x120
        out     dx, ax
; switch to register window 5
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+5
        out     dx, ax
; set RxFilter to enable individual address matches
        mov     ax, (10000b shl 11)
        lea     edx, [ebp+E3C59X_REG_RX_FILTER]
        in      al, dx
        or      al, 1
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        out     dx, ax
; issue RxEnable and TxEnable
        call    e3c59x_rx_reset
        call    e3c59x_tx_reset
; download a self-directed test packet
        mov     edi, node_addr
        mov     bx, 0x0608 ; packet type
        mov     esi, e3c59x_self_directed_packet
        mov     ecx, 6 ; 6 + 6 + 2 + 6 = 20 bytes
        call    dword [e3c59x_transmit_function]
; wait for 2s
        mov     esi, 2000 ; 2000ms = 2s
        call    delay_ms
; check if self-directed packet is received
        call    dword [e3c59x_receive_function]
        test    al, al
        jnz     .finish
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
; clear fullDuplexEnable in MacControl register
        lea     edx, [ebp+E3C59X_REG_MAC_CONTROL]
        in      ax, dx
        and     ax, not 0x120
        out     dx, ax
        xor     al, al
.finish:
        ret

;***************************************************************************
;   Function
;      e3c59x_try_loopback
;   Description
;      tries a loopback packet for 10BASE2 or AUI port
;   Parameters
;      al -  0: 10Mbps AUI connector
;            1: 10BASE-2
;      ebp - io_addr
;   Return value
;      al - 0
;      al - 1
;   Destroyed registers
;      eax, ebx, ecx, edx, edi, esi
;
;***************************************************************************
        align 4
e3c59x_try_loopback:
        push    eax
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
        pop     eax
        push    eax
if defined E3C59X_DEBUG
        mov     bl, al
        inc     bl
        shl     bl, 3
        or      byte [e3c59x_link_type+1], bl
end if ; defined E3C59X_DEBUG
        test    al, al ; aui or coax?
        jz      .complete_loopback
; enable 100BASE-2 DC-DC converter
        mov     ax, (10b shl 11) ; EnableDcConverter
        out     dx, ax
.complete_loopback:
        mov     cl, 2 ; give a port 3 chances to complete a loopback
.next_try:
        push    ecx
        call    e3c59x_test_packet
        pop     ecx
        test    al, al
        jnz     .finish
        dec     cl
        jns     .next_try
.finish:
        xchg    eax, [esp]
        test    al, al
        jz      .aui_finish
; issue DisableDcConverter command
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (10111b shl 11)
        out     dx, ax
.aui_finish:
        pop     eax ; al contains the result of operation
if defined E3C59X_DEBUG
        test    al, al
        jnz     @f
        and     byte [e3c59x_link_type+1], not 11000b
@@:
end if ; defined E3C59X_DEBUG
        ret

;***************************************************************************
;   Function
;      e3c59x_set_available_media
;   Description
;      sets the first available media
;   Parameters
;      ebp - io_addr
;   Return value
;      al - 0
;      al - 1
;   Destroyed registers
;      eax, edx
;
;***************************************************************************
        align 4
e3c59x_set_available_media:
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
        lea     edx, [ebp+E3C59X_REG_INTERNAL_CONFIG]
        in      eax, dx
        push    eax
        lea     edx, [ebp+E3C59X_REG_MEDIA_OPTIONS]
        in      ax, dx
        test    al, 10b
        jz      @f
; baseTXAvailable
        pop     eax
        and     eax, not (1111b shl 20)
        or      eax, (100b shl 20)
if defined E3C59X_DEBUG & defined E3C59X_FORCE_FD
        mov     word [e3c59x_link_type], (1 shl 8)
else if defined E3C59X_DEBUG
        mov     word [e3c59x_link_type], (1 shl 7)
end if
        jmp     .set_media
@@:
        test    al, 100b
        jz      @f
; baseFXAvailable
        pop     eax
        and     eax, not (1111b shl 20)
        or      eax, (101b shl 20)
if defined E3C59X_DEBUG
        mov     word [e3c59x_link_type], (1 shl 10)
end if
        jmp     .set_media
@@:
        test    al, 1000000b
        jz      @f
; miiDevice
        pop     eax
        and     eax, not (1111b shl 20)
        or      eax, (0110b shl 20)
if defined E3C59X_DEBUG
        mov     word [e3c59x_link_type], (1 shl 13)
end if
        jmp     .set_media
@@:
        test    al, 1000b
        jz      @f
.set_default:
; 10bTAvailable
        pop     eax
        and     eax, not (1111b shl 20)
if defined E3C59X_DEBUG & defined E3C59X_FORCE_FD
        mov     word [e3c59x_link_type], (1 shl 6)
else if defined E3C59X_DEBUG
        mov     word [e3c59x_link_type], (1 shl 5)
end if ; E3C59X_FORCE_FD
        jmp     .set_media
@@:
        test    al, 10000b
        jz      @f
; coaxAvailable
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (10b shl 11) ; EnableDcConverter
        out     dx, ax
        pop     eax
        and     eax, not (1111b shl 20)
        or      eax, (11b shl 20)
if defined E3C59X_DEBUG
        mov     word [e3c59x_link_type], (1 shl 12)
end if ; defined E3C59X_DEBUG
        jmp     .set_media
@@:
        test    al, 10000b
        jz      .set_default
; auiAvailable
        pop     eax
        and     eax, not (1111b shl 20)
        or      eax, (1 shl 20)
if defined E3C59X_DEBUG
        mov     word [e3c59x_link_type], (1 shl 11)
end if ; defined E3C59X_DEBUG
.set_media:
        lea     edx, [ebp+E3C59X_REG_INTERNAL_CONFIG]
        out     dx, eax
if defined E3C59X_FORCE_FD
; set fullDuplexEnable in MacControl register
        lea     edx, [ebp+E3C59X_REG_MAC_CONTROL]
        in      ax, dx
        or      ax, 0x120
        out     dx, ax
end if ; E3C59X_FORCE_FD
        mov     al, 1
        ret

;***************************************************************************
;   Function
;      e3c59x_set_active_port
;   Description
;      It selects the media port (transceiver) to be used
;   Parameters:
;      ebp - io_addr
;   Return value:
;   Destroyed registers
;      eax, ebx, ecx, edx, edi, esi
;
;***************************************************************************
        align 4
e3c59x_set_active_port:
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
        lea     edx, [ebp+E3C59X_REG_INTERNAL_CONFIG]
        in      eax, dx
        test    eax, (1 shl 24) ; check if autoselect enable
        jz      .set_first_available_media
; check 100BASE-TX and 10BASE-T
        lea     edx, [ebp+E3C59X_REG_MEDIA_OPTIONS]
        in      ax, dx
        test    al, 1010b ; check whether 100BASE-TX or 10BASE-T available
        jz      .mii_device ; they are not available
; set auto-negotiation
        lea     edx, [ebp+E3C59X_REG_INTERNAL_CONFIG]
        in      eax, dx
        and     eax, not (1111b shl 20)
        or      eax, (1000b shl 20)
        out     dx, eax
        call    e3c59x_try_mii
        test    al, al
        jz      .mii_device
        ret
.mii_device:
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
; check for off-chip mii device
        lea     edx, [ebp+E3C59X_REG_MEDIA_OPTIONS]
        in      ax, dx
        test    al, 1000000b ; check miiDevice
        jz      .base_fx
        lea     edx, [ebp+E3C59X_REG_INTERNAL_CONFIG]
        in      eax, dx
        and     eax, not (1111b shl 20)
        or      eax, (0110b shl 20) ; set MIIDevice
        out     dx, eax
        call    e3c59x_try_mii
        test    al, al
        jz      .base_fx
        ret
.base_fx:
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
; check for 100BASE-FX
        lea     edx, [ebp+E3C59X_REG_MEDIA_OPTIONS]
        in      ax, dx ; read media option register
        test    al, 100b ; check 100BASE-FX
        jz      .aui_enable
        lea     edx, [ebp+E3C59X_REG_INTERNAL_CONFIG]
        in      eax, dx
        and     eax, not (1111b shl 20)
        or      eax, (0101b shl 20) ; set 100base-FX
        out     dx, eax
        call    e3c59x_try_link_detect
        test    al, al
        jz      .aui_enable
        ret
.aui_enable:
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
; check for 10Mbps AUI connector
        lea     edx, [ebp+E3C59X_REG_MEDIA_OPTIONS]
        in      ax, dx ; read media option register
        test    al, 100000b ; check 10Mbps AUI connector
        jz      .coax_available
        lea     edx, [ebp+E3C59X_REG_INTERNAL_CONFIG]
        in      eax, dx
        and     eax, not (1111b shl 20)
        or      eax, (0001b shl 20) ; set 10Mbps AUI connector
        out     dx, eax
        xor     al, al ; try 10Mbps AUI connector
        call    e3c59x_try_loopback
        test    al, al
        jz      .coax_available
        ret
.coax_available:
; switch to register window 3
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+3
        out     dx, ax
; check for coaxial 10BASE-2 port
        lea     edx, [ebp+E3C59X_REG_MEDIA_OPTIONS]
        in      ax, dx ; read media option register
        test    al, 10000b ; check 10BASE-2
        jz      .set_first_available_media
        lea     edx, [ebp+E3C59X_REG_INTERNAL_CONFIG]
        in      eax, dx
        and     eax, not (1111b shl 20)
        or      eax, (0011b shl 20) ; set 10BASE-2
        out     dx, eax
        mov     al, 1
        call    e3c59x_try_loopback
        test    al, al
        jz      .set_first_available_media
        ret
.set_first_available_media:
        jmp     e3c59x_set_available_media

;***************************************************************************
;   Function
;      e3c59x_wake_up
;   Description
;      set the power state to D0
;   Destroyed registers
;      eax, ebx, ecx, edx, edi, esi
;
;***************************************************************************
        align 4
e3c59x_wake_up:
; wake up - we directly do it by programming PCI
; check if the device is power management capable
        mov     al, 2
        mov     ah, [pci_bus]
        mov     bl, PCI_REG_STATUS
        mov     bh, [pci_dev]
        push    eax ebx
        call    pci_read_reg
        test    al, 10000b ; is there "new capabilities" linked list?
        pop     ebx eax
        jz      .device_awake
; search for power management register
        mov     al, 1
        mov     bl, PCI_REG_CAP_PTR
        push    eax ebx
        call    pci_read_reg
        mov     cl, al
        cmp     cl, 0x3f
        pop     ebx eax
        jbe     .device_awake
; traverse the list
        mov     al, 2
.pm_loop:
        mov     bl, cl
        push    eax ebx
        call    pci_read_reg
        cmp     al, 1
        je      .set_pm_state
        test    ah, ah
        mov     cl, ah
        pop     ebx eax
        jnz     .pm_loop
        jmp     .device_awake
; waku up the device if necessary
.set_pm_state:
        pop     ebx eax
        add     bl, PCI_REG_PM_CTRL
        push    eax ebx
        call    pci_read_reg
        mov     cx, ax
        test    cl, 3
        pop     ebx eax
        jz      .device_awake
        and     cl, not 11b ; set state to D0
        call    pci_write_reg
.device_awake:
        ret

;***************************************************************************
;   Function
;      e3c59x_probe
;   Description
;      Searches for an ethernet card, enables it and clears the rx buffer
;      If a card was found, it enables the ethernet -> TCPIP link
;   Destroyed registers
;      eax, ebx, ecx, edx, edi, esi
;
;***************************************************************************
        align 4
e3c59x_probe:
        movzx   ebp, word [io_addr]
        mov     al, 2
        mov     ah, [pci_bus]
        mov     bh, [pci_dev]
        mov     bl, PCI_REG_COMMAND
        push    ebp eax ebx
        call    pci_read_reg
        mov     cx, ax
        or      cl, (1 shl PCI_BIT_MASTER) or (1 shl PCI_BIT_PIO)
        and     cl, not (1 shl PCI_BIT_MMIO)
        pop     ebx eax
        call    pci_write_reg
; wake up the card
        call    e3c59x_wake_up
        pop     ebp
; get chip version
        mov     ax, [pci_data+2]
        mov     ecx, E3C59X_HW_VERSIONS_SIZE/4-1
.chip_ver_loop:
        cmp     ax, [e3c59x_hw_versions+ecx*4]
        jz      .chip_ver_found
        dec     ecx
        jns     .chip_ver_loop
        xor     ecx, ecx
.chip_ver_found:
        mov     [e3c59x_ver_id], cl
        test    word [e3c59x_hw_versions+2+ecx*4], HAS_HWCKSM
        setnz   [e3c59x_has_hwcksm]
; set pci latency for vortex cards
        test    word [e3c59x_hw_versions+2+ecx*4], IS_VORTEX
        jz      .not_vortex
        mov     cx, 11111000b ; 248 = max latency
        mov     al, 1
        mov     ah, [pci_bus]
        mov     bl, PCI_REG_LATENCY
        mov     bh, [pci_dev]
        call    pci_write_reg
.not_vortex:
; set RX/TX functions
        mov     ax, E3C59X_EEPROM_REG_CAPABILITIES
        call    e3c59x_read_eeprom
        test    al, 100000b ; full bus master?
        setnz   [e3c59x_full_bus_master]
        jnz     .boomerang_func
        mov     dword [e3c59x_transmit_function], e3c59x_vortex_transmit
        mov     dword [e3c59x_receive_function], e3c59x_vortex_poll
        jmp     @f
.boomerang_func: ; full bus master, so use boomerang functions
        mov     dword [e3c59x_transmit_function], e3c59x_boomerang_transmit
        mov     dword [e3c59x_receive_function], e3c59x_boomerang_poll
@@:
; read MAC from eeprom
        mov     ecx, 2
.mac_loop:
        lea     ax, [E3C59X_EEPROM_REG_OEM_NODE_ADDR+ecx]
        call    e3c59x_read_eeprom
        xchg    ah, al ; htons
        mov     [node_addr+ecx*2], ax
        dec     ecx
        jns     .mac_loop
        test    byte [e3c59x_full_bus_master], 0xff
        jz      .set_preamble
; switch to register window 2
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+2
        out     dx, ax
; activate xcvr by setting some magic bits
        lea     edx, [ebp+E3C59X_REG_RESET_OPTIONS]
        in      ax, dx
        and     ax, not 0x4010
        movzx   ebx, byte [e3c59x_ver_id]
        test    word [ebx*4+e3c59x_hw_versions+2], INVERT_LED_PWR
        jz      @f
        or      al, 0x10
@@:
        test    word [ebx*4+e3c59x_hw_versions+2], INVERT_MII_PWR
        jz      @f
        or      ah, 0x40
@@:
        out     dx, ax
.set_preamble:
; use preamble as default
        mov     byte [e3c59x_preamble], 1 ; enable preamble

;***************************************************************************
;   Function
;      e3c59x_reset
;   Description
;      Place the chip (ie, the ethernet card) into a virgin state
;   Destroyed registers
;      eax, ebx, ecx, edx, edi, esi
;
;***************************************************************************
e3c59x_reset:
; issue global reset
        call    e3c59x_global_reset
; disable interrupts
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (1110b shl 11)
        out     dx, ax
; enable Statistics
        mov     ax, (10101b shl 11)
        out     dx, ax
; set indication
        mov     ax, (1111b shl 11) or 0x6c6
        out     dx, ax
; acknowledge (clear) every interrupt indicator
        mov     ax, (1101b shl 11) or 0x661
        out     dx, ax
; switch to register window 2
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+2
        out     dx, ax
; write MAC addres back into the station address registers
        lea     edx, [ebp+E3C59X_REG_STATION_ADDRESS_LO]
        mov     esi, node_addr
        cld
        outsw
        add     edx, 2
        outsw
        add     edx, 2
        outsw
        add     edx, 2
; clear station mask
        xor     eax, eax
        out     dx, ax
        add     edx, 2
        out     dx, ax
        add     edx, 2
        out     dx, ax
; switch to register window 6
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+6
        out     dx, ax
; clear all statistics by reading
        lea     edx, [ebp+E3C59X_REG_CARRIER_LOST]
        mov     cl, 9
.stat_clearing_loop:
        in      al, dx
        inc     edx
        dec     cl
        jns     .stat_clearing_loop
        in      ax, dx
        add     dx, 2
        in      ax, dx
; switch to register window 4
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+4
        out     dx, ax
; clear BadSSD
        lea     edx, [ebp+E3C59X_REG_BAD_SSD]
        in      al, dx
; clear extra statistics bit in NetworkDiagnostic
        lea     edx, [ebp+E3C59X_REG_NETWORK_DIAGNOSTIC]
        in      ax, dx
        or      ax, 0x0040
        out     dx, ax
; SetRxEarlyThreshold
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (10001b shl 11)+(E3C59X_MAX_ETH_PKT_SIZE shr 2)
        out     dx, ax
        test    byte [e3c59x_full_bus_master], 0xff
        jz      .skip_boomerang_setting
; set upRxEarlyEnable
        lea     edx, [ebp+E3C59X_REG_DMA_CTRL]
        in      eax, dx
        or      eax, 0x20
        out     dx, eax
; TxFreeThreshold
        lea     edx, [ebp+E3C59X_REG_TX_FREE_THRESH]
        mov     al, (E3C59X_MAX_ETH_PKT_SIZE / 256)
        out     dx, al
; program DnListPtr
        lea     edx, [ebp+E3C59X_REG_DN_LIST_PTR]
        xor     eax, eax
        out     dx, eax
.skip_boomerang_setting:
; initialization
        call    e3c59x_rx_reset
        call    e3c59x_tx_reset
        call    e3c59x_set_active_port
        call    e3c59x_rx_reset
        call    e3c59x_tx_reset
; switch to register window 5
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+5
        out     dx, ax
; program RxFilter for promiscuous operation
        mov     ax, (10000b shl 11)
        lea     edx, [ebp+E3C59X_REG_RX_FILTER]
        in      al, dx
        or      al, 1111b
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        out     dx, ax
; switch to register window 4
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+4
        out     dx, ax
; wait for linkDetect
        lea     edx, [ebp+E3C59X_REG_MEDIA_STATUS]
        mov     cl, 20 ; wait for max 2s
        mov     esi, 100 ; 100ms
.link_detect_loop:
        call    delay_ms
        in      ax, dx
        test    ah, 1000b ; linkDetect
        jnz     @f
        dec     cl
        jnz     .link_detect_loop
@@:
; Indicate that we have successfully reset the card
        mov     eax, [pci_data]
        mov     [eth_status], eax
if defined E3C59X_DEBUG
        call    e3c59x_debug
end if ; defined E3C59X_DEBUG
        ret

;***************************************************************************
;   Function
;      e3c59x_global_reset
;   Description
;      resets the device
;   Parameters:
;      ebp - io_addr
;   Return value:
;   Destroyed registers
;      ax, ecx, edx, esi
;
;***************************************************************************
        align 4
e3c59x_global_reset:
; GlobalReset
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        xor     eax, eax
;       or      al, 0x14
        out     dx, ax
; wait for GlobalReset to complete
        mov     ecx, 64000
.global_reset_loop:
        in      ax, dx
        test    ah, 10000b ; check CmdInProgress
        jz      .finish
        dec     ecx
        jnz     .global_reset_loop
.finish:
; wait for 2 seconds for NIC to boot
        mov     esi, 2000 ; 2000ms = 2s
        push    ebp
        call    delay_ms
        pop     ebp
        ret

;***************************************************************************
;   Function
;      e3c59x_tx_reset
;   Description
;      resets and enables transmitter engine
;   Parameters:
;      ebp - io_addr
;   Return value:
;   Destroyed registers
;      ax, ecx, edx
;
;***************************************************************************
        align 4
e3c59x_tx_reset:
; TxReset
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (01011b shl 11)
        out     dx, ax
; Wait for TxReset to complete
        mov     ecx, 200000
.tx_reset_loop:
        in      ax, dx
        test    ah, 10000b ; check CmdInProgress
        jz      .tx_set_prev
        dec     ecx
        jns     .tx_reset_loop
.tx_set_prev:
        test    byte [e3c59x_full_bus_master], 0xff
        jz      .tx_enable
; init last_dpd
        mov     dword [e3c59x_prev_dpd], e3c59x_dpd_buff+(E3C59X_NUM_TX_DESC-1)*E3C59X_DPD_SIZE
        mov     dword [e3c59x_prev_tx_frame], e3c59x_tx_buff+(E3C59X_NUM_TX_DESC-1)*E3C59X_MAX_ETH_FRAME_SIZE
.tx_enable:
        mov     ax, (01001b shl 11) ; TxEnable
        out     dx, ax
        ret

;***************************************************************************
;   Function
;      e3c59x_rx_reset
;   Description
;      resets and enables receiver engine
;   Parameters:
;      ebp - io_addr
;   Return value:
;   Destroyed registers
;      eax, ebx, ecx, edx, edi, esi
;
;***************************************************************************
        align 4
e3c59x_rx_reset:
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (0101b shl 11) or 0x4 ; RxReset
        out     dx, ax
; wait for RxReset to complete
        mov     ecx, 200000
.rx_reset_loop:
        in      ax, dx
        test    ah, 10000b ; check CmdInProgress
        jz      .setup_upd
        dec     ecx
        jns     .rx_reset_loop
.setup_upd:
; check if full bus mastering
        test    byte [e3c59x_full_bus_master], 0xff
        jz      .rx_enable
; create upd ring
        mov     eax, e3c59x_upd_buff
        zero_to_virt eax
        mov     [e3c59x_curr_upd], eax
        mov     esi, eax
        virt_to_dma esi
        mov     edi, e3c59x_rx_buff
        zero_to_dma edi
        mov     ebx, e3c59x_upd_buff+(E3C59X_NUM_RX_DESC-1)*E3C59X_UPD_SIZE
        zero_to_virt ebx
        mov     cl, E3C59X_NUM_RX_DESC-1
.upd_loop:
        mov     [ebx+E3C59X_UPD_UP_NEXT_PTR], esi
        and     dword [eax+E3C59X_UPD_PKT_STATUS], 0
        mov     [eax+E3C59X_UPD_UP_FRAG_ADDR], edi
        mov     dword [eax+E3C59X_UPD_UP_FRAG_LEN], E3C59X_MAX_ETH_FRAME_SIZE or (1 shl 31)
        add     edi, E3C59X_MAX_ETH_FRAME_SIZE
        add     esi, E3C59X_UPD_SIZE
        mov     ebx, eax
        add     eax, E3C59X_UPD_SIZE
        dec     cl
        jns     .upd_loop
        mov     eax, e3c59x_upd_buff
        zero_to_dma eax
        lea     edx, [ebp+E3C59X_REG_UP_LIST_PTR]
        out     dx, eax ; write E3C59X_REG_UP_LIST_PTR
        lea     edx, [ebp+E3C59X_REG_COMMAND]
.rx_enable:
        mov     ax, (00100b shl 11) ; RxEnable
        out     dx, ax
        ret

;***************************************************************************
;   Function
;      e3c59x_write_eeprom
;   Description
;      reads eeprom
;      Note : the caller must switch to the register window 0
;             before calling this function
;   Parameters:
;      ax - register to be read (only the first 63 words can be read)
;      cx - value to be read into the register
;   Return value:
;      ax - word read
;   Destroyed registers
;      ax, ebx, edx
;
;***************************************************************************
;       align 4
;e3c59x_write_eeprom:
;       mov     edx, [io_addr]
;       add     edx, E3C59X_REG_EEPROM_COMMAND
;       cmp     ah, 11b
;       ja      .finish ; address may have a value of maximal 1023
;       shl     ax, 2
;       shr     al, 2
;       push    eax
;; wait for busy
;       mov     ebx, 0xffff
;@@:
;       in      ax, dx
;       test    ah, 0x80
;       jz      .write_enable
;       dec     ebx
;       jns     @r
;; write enable
;.write_enable:
;       xor     eax, eax
;       mov     eax, (11b shl 4)
;       out     dx, ax
;; wait for busy
;       mov     ebx, 0xffff
;@@:
;       in      ax, dx
;       test    ah, 0x80
;       jz      .erase_loop
;       dec     ebx
;       jns     @r
;.erase_loop:
;       pop     eax
;       push    eax
;       or      ax, (11b shl 6) ; erase register
;       out     dx, ax
;       mov     ebx, 0xffff
;@@:
;       in      ax, dx
;       test    ah, 0x80
;       jz      .write_reg
;       dec     ebx
;       jns     @r
;.write_reg:
;       add     edx, E3C59X_REG_EEPROM_DATA-E3C59X_REG_EEPROM_COMMAND
;       mov     eax, ecx
;       out     dx, ax
;; write enable
;       add     edx, E3C59X_REG_EEPROM_COMMAND-E3C59X_REG_EEPROM_DATA
;       xor     eax, eax
;       mov     eax, (11b shl 4)
;       out     dx, ax
; wait for busy
;       mov     ebx, 0xffff
;@@:
;       in      ax, dx
;       test    ah, 0x80
;       jz      .issue_write_reg
;       dec     ebx
;       jns     @r
;.issue_write_reg:
;       pop     eax
;       or      ax, 01b shl 6
;       out     dx, ax
;.finish:
;       ret
;***************************************************************************
;   Function
;      e3c59x_read_eeprom
;   Description
;      reads eeprom
;   Parameters:
;       ax - register to be read (only the first 63 words can be read)
;      ebp - io_addr
;   Return value:
;      ax - word read
;   Destroyed registers
;      ax, ebx, edx, ebp
;
;***************************************************************************
        align 4
e3c59x_read_eeprom:
        push    eax
; switch to register window 0
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+0
        out     dx, ax
        pop     eax
        and     ax, 111111b ; take only the first 6 bits into account
        movzx   ebx, byte [e3c59x_ver_id]
        test    word [ebx*4+e3c59x_hw_versions+2], EEPROM_8BIT
        jz      @f
        add     ax, 0x230 ; hardware constant
        jmp     .read
@@:
        add     ax, E3C59X_EEPROM_CMD_READ
        test    word [ebx*4+e3c59x_hw_versions+2], EEPROM_OFFSET
        jz      .read
        add     ax, 0x30
.read:
        lea     edx, [ebp+E3C59X_REG_EEPROM_COMMAND]
        out     dx, ax
        mov     ebx, 0xffff ; duration of about 162 us ;-)
.wait_for_reading:
        in      ax, dx
        test    ah, 0x80 ; check bit eepromBusy
        jz      .read_data
        dec     ebx
        jns     .wait_for_reading
.read_data:
        lea     edx, [ebp+E3C59X_REG_EEPROM_DATA]
        in      ax, dx
        ret

;***************************************************************************
;   Function
;      e3c59x_mdio_sync
;   Description
;      initial synchronization
;   Parameters
;      ebp - io_addr
;   Return value
;   Destroyed registers
;      ax, edx, cl
;
;***************************************************************************
        align 4
e3c59x_mdio_sync:
; switch to register window 4
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+4
        out     dx, ax
        cmp     byte [e3c59x_preamble], 0
        je      .no_preamble
; send 32 logic ones
        lea     edx, [ebp+E3C59X_REG_PHYSICAL_MGMT]
        mov     cl, 31
.loop:
        mov     ax, (1 shl E3C59X_BIT_MGMT_DATA) or (1 shl E3C59X_BIT_MGMT_DIR)
        out     dx, ax
        in      ax, dx ; delay
        mov     ax, (1 shl E3C59X_BIT_MGMT_DATA) \
                or (1 shl E3C59X_BIT_MGMT_DIR) \
                or (1 shl E3C59X_BIT_MGMT_CLK)
        out     dx, ax
        in      ax, dx ; delay
        dec     cl
        jns     .loop
.no_preamble:
        ret

;***************************************************************************
;   Function
;      e3c59x_mdio_read
;   Description
;      read MII register
;      see page 16 in D83840A.pdf
;   Parameters
;       ah - PHY addr
;       al - register addr
;      ebp - io_addr
;   Return value
;      ax - register read
;   Destroyed registers
;      eax, ebx, cx, edx
;
;***************************************************************************
        align 4
e3c59x_mdio_read:
        push    eax
        call    e3c59x_mdio_sync ; returns with window #4
        pop     eax
        lea     edx, [ebp+E3C59X_REG_PHYSICAL_MGMT]
        shl     al, 3
        shr     ax, 3
        and     ax, not E3C59X_MII_CMD_MASK
        or      ax, E3C59X_MII_CMD_READ
        mov     ebx, eax
        xor     ecx, ecx
        mov     cl, 13
.cmd_loop:
        mov     ax, (1 shl E3C59X_BIT_MGMT_DIR) ; write mii
        bt      ebx, ecx
        jnc     .zero_bit
        or      al, (1 shl E3C59X_BIT_MGMT_DATA)
.zero_bit:
        out     dx, ax
        push    eax
        in      ax, dx ; delay
        pop     eax
        or      al, (1 shl E3C59X_BIT_MGMT_CLK) ; write
        out     dx, ax
        in      ax, dx ; delay
        dec     cl
        jns     .cmd_loop
; read data (18 bits with the two transition bits)
        mov     cl, 17
        xor     ebx, ebx
.read_loop:
        shl     ebx, 1
        xor     eax, eax ; read comand
        out     dx, ax
        in      ax, dx ; delay
        in      ax, dx
        test    al, (1 shl E3C59X_BIT_MGMT_DATA)
        jz      .dont_set
        inc     ebx
.dont_set:
        mov     ax, (1 shl E3C59X_BIT_MGMT_CLK)
        out     dx, ax
        in      ax, dx ; delay
        dec     cl
        jns     .read_loop
        mov     eax, ebx
        ret

;***************************************************************************
;   Function
;      e3c59x_mdio_write
;   Description
;      write MII register
;      see page 16 in D83840A.pdf
;   Parameters
;       ah - PHY addr
;       al - register addr
;       bx - word to be written
;      ebp - io_addr
;   Return value
;      ax - register read
;   Destroyed registers
;      eax, ebx, cx, edx
;
;***************************************************************************
        align 4
e3c59x_mdio_write:
        push    eax
        call    e3c59x_mdio_sync
        pop     eax
        lea     edx, [ebp+E3C59X_REG_PHYSICAL_MGMT]
        shl     al, 3
        shr     ax, 3
        and     ax, not E3C59X_MII_CMD_MASK
        or      ax, E3C59X_MII_CMD_WRITE
        shl     eax, 2
        or      eax, 10b ; transition bits
        shl     eax, 16
        mov     ax, bx
        mov     ebx, eax
        mov     ecx, 31
.cmd_loop:
        mov     ax, (1 shl E3C59X_BIT_MGMT_DIR) ; write mii
        bt      ebx, ecx
        jnc     .zero_bit
        or      al, (1 shl E3C59X_BIT_MGMT_DATA)
.zero_bit:
        out     dx, ax
        push    eax
        in      ax, dx ; delay
        pop     eax
        or      al, (1 shl E3C59X_BIT_MGMT_CLK) ; write
        out     dx, ax
        in      ax, dx ; delay
        dec     ecx
        jns     .cmd_loop
        ret

;***************************************************************************
;   Function
;      e3c59x_transmit
;   Description
;      Transmits a packet of data via the ethernet card
;         edi - Pointer to 48 bit destination address
;          bx - Type of packet
;         ecx - size of packet
;         esi - pointer to packet data
;         ebp - io_addr
;   Destroyed registers
;      eax, ecx, edx, ebp
;
;***************************************************************************
        align 4
e3c59x_transmit:
        jmp     dword [e3c59x_transmit_function]

;***************************************************************************
;   Function
;      e3c59x_check_tx_status
;   Description
;      Checks TxStatus queue.
;   Return value
;      al - 0 no error was found
;      al - 1 error was found TxReset is needed
;   Destroyed registers
;      eax, ecx, edx, ebp
;
;***************************************************************************
e3c59x_check_tx_status:
        movzx   ebp, word [io_addr] ; to be implemented in ETHERNET.INC
; clear TxStatus queue
        lea     edx, [ebp+E3C59X_REG_TX_STATUS]
        mov     cl, 31 ; max number of queue entries
.tx_status_loop:
        in      al, dx
        test    al, al
        jz      .finish ; no error
        test    al, 0x3f
        jnz     .finish ; error
.no_error_found:
; clear current TxStatus entry which advances the next one
        xor     al, al
        out     dx, al
        dec     cl
        jns     .tx_status_loop
.finish:
        ret

;***************************************************************************
;   Function
;      e3c59x_vortex_transmit
;   Description
;      Transmits a packet of data via the ethernet card
;         edi - Pointer to 48 bit destination address
;          bx - Type of packet
;         ecx - size of packet
;         esi - pointer to packet data
;         ebp - io_addr
;   Destroyed registers
;      eax, edx, ecx, edi, esi, ebp
;
;***************************************************************************
        align 4
e3c59x_vortex_transmit:
        push    ecx
        call    e3c59x_check_tx_status
        pop     ecx
        test    al, al
        jz      .no_error_found
        jmp     e3c59x_tx_reset
.no_error_found:
; switch to register window 7
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+7
        out     dx, ax
; check for master operation in progress
        lea     edx, [ebp+E3C59X_REG_MASTER_STATUS]
        in      ax, dx
        test    ah, 0x80
        jnz     .finish ; no DMA for sending
; dword boundary correction
        cmp     ecx, E3C59X_MAX_ETH_FRAME_SIZE
        ja      .finish ; packet is too long
; write Frame Start Header
        mov     eax, ecx
; add header length and extend the complete length to dword boundary
        add     eax, ETH_HLEN+3
        and     eax, not 3
        lea     edx, [ebp+E3C59X_REG_TX_DATA]
        out     dx, eax
; prepare the complete frame
        push    esi
        mov     esi, edi
        mov     edi, e3c59x_tx_buff
        zero_to_virt edi
        cld
; copy destination address
        movsd
        movsw
; copy source address
        mov     esi, node_addr
        movsd
        movsw
; copy packet type
        mov     [edi], bx
        add     edi, 2
; copy packet data
        pop     esi
        push    ecx
        shr     ecx, 2
        rep movsd
        pop     ecx
        and     ecx, 3
        rep movsb
        mov     ecx, eax
; program frame address to be sent
        lea     edx, [ebp+E3C59X_REG_MASTER_ADDRESS]
        mov     eax, e3c59x_tx_buff
        zero_to_dma eax
        out     dx, eax
; program frame length
        lea     edx, [ebp+E3C59X_REG_MASTER_LEN]
        mov     eax, ecx
        out     dx, ax
; start DMA Down
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (10100b shl 11) + 1 ; StartDMADown
        out     dx, ax
.finish:
        ret

;***************************************************************************
;   Function
;      e3c59x_boomerang_transmit
;   Description
;      Transmits a packet of data via the ethernet card
;         edi - Pointer to 48 bit destination address
;          bx - Type of packet
;         ecx - size of packet
;         esi - pointer to packet data
;         ebp - io_addr
;   Destroyed registers
;      eax, ebx, ecx, edx, esi, edi, ebp
;
;***************************************************************************
        align 4
e3c59x_boomerang_transmit:
        push    ecx
        call    e3c59x_check_tx_status
        pop     ecx
        test    al, al
        jz      .no_error_found
        jmp     e3c59x_tx_reset
.no_error_found:
        cmp     ecx, E3C59X_MAX_ETH_FRAME_SIZE
        ja      .finish ; packet is too long
; calculate descriptor address
        mov     eax, [e3c59x_prev_dpd]
        cmp     eax, e3c59x_dpd_buff+(E3C59X_NUM_TX_DESC-1)*E3C59X_DPD_SIZE
        jb      @f
; wrap around
        mov     eax, e3c59x_dpd_buff-E3C59X_DPD_SIZE
@@:
        add     eax, E3C59X_DPD_SIZE
        zero_to_virt eax
        push    eax
; check DnListPtr
        lea     edx, [ebp+E3C59X_REG_DN_LIST_PTR]
        in      eax, dx
; mark if Dn_List_Ptr is cleared
        test    eax, eax
        setz    [e3c59x_dn_list_ptr_cleared]
; finish if no more free descriptor is available - FIXME!
        cmp     eax, [esp]
        pop     eax
        jz      .finish
        push    eax esi
        mov     esi, edi
; calculate tx_buffer address
        mov     edi, [e3c59x_prev_tx_frame]
        cmp     edi, e3c59x_tx_buff+(E3C59X_NUM_TX_DESC-1)*E3C59X_MAX_ETH_FRAME_SIZE
        jb      @f
; wrap around
        mov     edi, e3c59x_tx_buff-E3C59X_MAX_ETH_FRAME_SIZE
@@:
        add     edi, E3C59X_MAX_ETH_FRAME_SIZE
        zero_to_virt edi
        mov     eax, edi
        cld
; copy destination address
        movsd
        movsw
; copy source address
        mov     esi, node_addr
        movsd
        movsw
; copy packet type
        mov     [edi], bx
        add     edi, 2
; copy packet data
        pop     esi
        push    ecx
        shr     ecx, 2
        rep movsd
        pop     ecx
        push    ecx
        and     ecx, 3
        rep movsb
; padding, do we really need it?
        pop     ecx
        add     ecx, ETH_HLEN
        cmp     ecx, ETH_ZLEN
        jae     @f
        mov     ecx, ETH_ZLEN
@@:
; calculate
        mov     ebx, ecx
        ;test   byte [e3c59x_has_hwcksm], 0xff
        ;jz     @f
        ;or      ebx, (1 shl 26) ; set AddTcpChecksum
;@@:
        or      ebx, 0x8000 ; transmission complete notification
        or      ecx, 0x80000000 ; last fragment
; program DPD
        mov     edi, eax
        pop     eax
        and     dword [eax+E3C59X_DPD_DN_NEXT_PTR], 0
        mov     dword [eax+E3C59X_DPD_FRAME_START_HDR], ebx
        virt_to_dma edi
        mov     dword [eax+E3C59X_DPD_DN_FRAG_ADDR], edi
        mov     [eax+E3C59X_DPD_DN_FRAG_LEN], ecx
; calculate physical address
        virt_to_dma eax
        push    eax
        cmp     byte [e3c59x_dn_list_ptr_cleared], 0
        jz      .add_to_list
; write Dn_List_Ptr
        out     dx, eax
        jmp     .finish
.add_to_list:
; DnStall
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, ((110b shl 11)+2)
        out     dx, ax
; wait for DnStall to complete
        mov     ecx, 6000
.wait_for_stall:
        in      ax, dx ; read E3C59X_REG_INT_STATUS
        test    ah, 10000b
        jz      .dnstall_ok
        dec     ecx
        jnz     .wait_for_stall
.dnstall_ok:
        pop     eax
        push    eax
        mov     ebx, [e3c59x_prev_dpd]
        zero_to_virt ebx
        mov     [ebx], eax
        lea     edx, [ebp+E3C59X_REG_DN_LIST_PTR]
        in      eax, dx
        test    eax, eax
        jnz     .dnunstall
; if Dn_List_Ptr has been cleared fill it up
        pop     eax
        push    eax
        out     dx, eax
.dnunstall:
; DnUnStall
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, ((110b shl 11)+3)
        out     dx, ax
.finish:
        pop     eax
        dma_to_zero eax
        mov     [e3c59x_prev_dpd], eax
        dma_to_zero edi
        mov     [e3c59x_prev_tx_frame], edi
        ret

;***************************************************************************
; Function
;    e3c59x_poll
; Description
;    Polls the ethernet card for a received packet
;    Received data, if any, ends up in Ether_buffer
; Destroyed registers
;    eax, ebx, edx, ecx, edi, esi, ebp
;
;***************************************************************************
        align 4
e3c59x_poll:
        jmp     dword [e3c59x_receive_function]

;***************************************************************************
; Function
;    e3c59x_vortex_poll
; Description
;    Polls the ethernet card for a received packet
;    Received data, if any, ends up in Ether_buffer
; Parameters
;    ebp - io_addr
; Return value
;    al - 0 ; no packet received
;    al - 1 ; packet received
; Destroyed registers
;    eax, ebx, edx, ecx, edi, esi, ebp
;
;***************************************************************************
        align 4
e3c59x_vortex_poll:
        and     word [eth_rx_data_len], 0 ; assume no packet received
        movzx   ebp, word [io_addr] ; to be implemented in ETHERNET.INC
.rx_status_loop:
; examine RxStatus
        lea     edx, [ebp+E3C59X_REG_RX_STATUS]
        in      ax, dx
        test    ax, ax
        jz      .finish
        test    ah, 0x80 ; rxIncomplete
        jz      .check_error
        jmp     .finish
.check_error:
        test    ah, 0x40
        jz      .check_length
; discard the top frame received advancing the next one
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (01000b shl 11)
        out     dx, ax
        jmp     .rx_status_loop
.check_length:
        and     eax, 0x1fff
        cmp     eax, E3C59X_MAX_ETH_PKT_SIZE
        ja      .discard_frame ; frame is too long discard it
.check_dma:
        push    eax
; switch to register window 7
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, E3C59X_SELECT_REGISTER_WINDOW+7
        out     dx, ax
; check for master operation in progress
        lea     edx, [ebp+E3C59X_REG_MASTER_STATUS]
        in      ax, dx
        test    ah, 0x80
        jz      .read_frame ; no DMA for receiving
        pop     eax
        jmp     .finish
.read_frame:
; program buffer address to read in
        lea     edx, [ebp+E3C59X_REG_MASTER_ADDRESS]
if defined E3C59X_LINUX
        mov     eax, e3c59x_rx_buff
        zero_to_dma eax
else
        mov     eax, Ether_buffer
end if
        out     dx, eax
; program frame length
        lea     edx, [ebp+E3C59X_REG_MASTER_LEN]
        mov     ax, 1560
        out     dx, ax
; start DMA Up
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (10100b shl 11) ; StartDMAUp
        out     dx, ax
; check for master operation in progress
.dma_loop:
        lea     edx, [ebp+E3C59X_REG_MASTER_STATUS]
        in      ax, dx
        test    ah, 0x80
        jnz     .dma_loop
; registrate the received packet length
        pop     eax
        mov     word [eth_rx_data_len], ax
; discard the top frame received
.discard_frame:
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, (01000b shl 11)
        out     dx, ax
.finish:
; set return value
        cmp     word [eth_rx_data_len], 0
        setne   al
        ret

;***************************************************************************
; Function
;    e3c59x_boomerang_poll
; Description
;    Polls the ethernet card for a received packet
;    Received data, if any, ends up in Ether_buffer
; Parameters
;    ebp - io_addr
; Return value
;    al - 0 ; no packet received
;    al - 1 ; packet received
; Destroyed registers
;    eax, edx, ecx, edi, esi, ebp
;
;***************************************************************************
        align 4
e3c59x_boomerang_poll:
        and     word [eth_rx_data_len], 0 ; assume no packet received
        movzx   ebp, word [io_addr] ; to be implemented in ETHERNET.INC
; check if packet is uploaded
        mov     eax, [e3c59x_curr_upd]
        test    byte [eax+E3C59X_UPD_PKT_STATUS+1], 0x80 ; upPktComplete
        jnz     .check_error
        jmp     .finish
; packet is uploaded check for any error
.check_error:
        test    byte [eax+E3C59X_UPD_PKT_STATUS+1], 0x40 ; upError
        jz      .copy_packet_length
        and     dword [eax+E3C59X_UPD_PKT_STATUS], 0
        jmp     .finish
.copy_packet_length:
        mov     ecx, [eax+E3C59X_UPD_PKT_STATUS]
        and     ecx, 0x1fff
        cmp     ecx, E3C59X_MAX_ETH_PKT_SIZE
        jbe     .copy_packet
        and     dword [eax+E3C59X_UPD_PKT_STATUS], 0
        jmp     .finish
.copy_packet:
        push    ecx
        mov     word [eth_rx_data_len], cx
        mov     esi, [eax+E3C59X_UPD_UP_FRAG_ADDR]
        dma_to_virt esi
        mov     edi, Ether_buffer
        shr     ecx, 2 ; first copy dword-wise
        cld
        rep movsd     ; copy the dwords
        pop     ecx
        and     ecx, 3
        rep movsb     ; copy the rest bytes
        mov     eax, [e3c59x_curr_upd]
        and     dword [eax+E3C59X_UPD_PKT_STATUS], 0
        virt_to_zero eax
        cmp     eax, e3c59x_upd_buff+(E3C59X_NUM_RX_DESC-1)*E3C59X_UPD_SIZE
        jb      .no_wrap
; wrap around
        mov     eax, e3c59x_upd_buff-E3C59X_UPD_SIZE
.no_wrap:
        add     eax, E3C59X_UPD_SIZE
        zero_to_virt eax
        mov     [e3c59x_curr_upd], eax
.finish:
; check if the NIC is in the upStall state
        lea     edx, [ebp+E3C59X_REG_UP_PKT_STATUS]
        in      eax, dx
        test    ah, 0x20 ; UpStalled
        jz      .noUpUnStall
; issue upUnStall command
        lea     edx, [ebp+E3C59X_REG_COMMAND]
        mov     ax, ((110b shl 11)+1) ; upUnStall
        out     dx, ax
.noUpUnStall:
; set return value
        cmp     word [eth_rx_data_len], 0
        setnz   al
        ret