kolibrios/drivers/video/drm/i915/intel_display.c

/*
 * Copyright © 2006-2007 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *
 * Authors:
 *  Eric Anholt <eric@anholt.net>
 */

//#include <linux/cpufreq.h>
#include <linux/module.h>
//#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/slab.h>
//#include <linux/vgaarb.h>
#include <drm/drm_edid.h>
#include "drmP.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
//#include "i915_trace.h"
#include "drm_dp_helper.h"

#include "drm_crtc_helper.h"

phys_addr_t get_bus_addr(void);

static inline __attribute__((const))
bool is_power_of_2(unsigned long n)
{
    return (n != 0 && ((n & (n - 1)) == 0));
}

#define MAX_ERRNO       4095

#define IS_ERR_VALUE(x) unlikely((x) >= (unsigned long)-MAX_ERRNO)

static inline long IS_ERR(const void *ptr)
{
    return IS_ERR_VALUE((unsigned long)ptr);
}

static inline void *ERR_PTR(long error)
{
    return (void *) error;
}


static inline int pci_read_config_word(struct pci_dev *dev, int where,
                    u16 *val)
{
    *val = PciRead16(dev->busnr, dev->devfn, where);
    return 1;
}


#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))

bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
static void intel_update_watermarks(struct drm_device *dev);
static void intel_increase_pllclock(struct drm_crtc *crtc);
static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);

typedef struct {
    /* given values */
    int n;
    int m1, m2;
    int p1, p2;
    /* derived values */
    int dot;
    int vco;
    int m;
    int p;
} intel_clock_t;

typedef struct {
    int min, max;
} intel_range_t;

typedef struct {
    int dot_limit;
    int p2_slow, p2_fast;
} intel_p2_t;

#define INTEL_P2_NUM              2
typedef struct intel_limit intel_limit_t;
struct intel_limit {
    intel_range_t   dot, vco, n, m, m1, m2, p, p1;
    intel_p2_t      p2;
    bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
              int, int, intel_clock_t *);
};

/* FDI */
#define IRONLAKE_FDI_FREQ       2700000 /* in kHz for mode->clock */

static bool
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
            int target, int refclk, intel_clock_t *best_clock);
static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
            int target, int refclk, intel_clock_t *best_clock);

static bool
intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
              int target, int refclk, intel_clock_t *best_clock);
static bool
intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
               int target, int refclk, intel_clock_t *best_clock);

static inline u32 /* units of 100MHz */
intel_fdi_link_freq(struct drm_device *dev)
{
	if (IS_GEN5(dev)) {
		struct drm_i915_private *dev_priv = dev->dev_private;
		return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
	} else
		return 27;
}

static const intel_limit_t intel_limits_i8xx_dvo = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 930000, .max = 1400000 },
        .n = { .min = 3, .max = 16 },
        .m = { .min = 96, .max = 140 },
        .m1 = { .min = 18, .max = 26 },
        .m2 = { .min = 6, .max = 16 },
        .p = { .min = 4, .max = 128 },
        .p1 = { .min = 2, .max = 33 },
	.p2 = { .dot_limit = 165000,
		.p2_slow = 4, .p2_fast = 2 },
	.find_pll = intel_find_best_PLL,
};

static const intel_limit_t intel_limits_i8xx_lvds = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 930000, .max = 1400000 },
        .n = { .min = 3, .max = 16 },
        .m = { .min = 96, .max = 140 },
        .m1 = { .min = 18, .max = 26 },
        .m2 = { .min = 6, .max = 16 },
        .p = { .min = 4, .max = 128 },
        .p1 = { .min = 1, .max = 6 },
	.p2 = { .dot_limit = 165000,
		.p2_slow = 14, .p2_fast = 7 },
	.find_pll = intel_find_best_PLL,
};

static const intel_limit_t intel_limits_i9xx_sdvo = {
        .dot = { .min = 20000, .max = 400000 },
        .vco = { .min = 1400000, .max = 2800000 },
        .n = { .min = 1, .max = 6 },
        .m = { .min = 70, .max = 120 },
        .m1 = { .min = 10, .max = 22 },
        .m2 = { .min = 5, .max = 9 },
        .p = { .min = 5, .max = 80 },
        .p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 200000,
		.p2_slow = 10, .p2_fast = 5 },
	.find_pll = intel_find_best_PLL,
};

static const intel_limit_t intel_limits_i9xx_lvds = {
        .dot = { .min = 20000, .max = 400000 },
        .vco = { .min = 1400000, .max = 2800000 },
        .n = { .min = 1, .max = 6 },
        .m = { .min = 70, .max = 120 },
        .m1 = { .min = 10, .max = 22 },
        .m2 = { .min = 5, .max = 9 },
        .p = { .min = 7, .max = 98 },
        .p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 112000,
		.p2_slow = 14, .p2_fast = 7 },
	.find_pll = intel_find_best_PLL,
};


static const intel_limit_t intel_limits_g4x_sdvo = {
	.dot = { .min = 25000, .max = 270000 },
	.vco = { .min = 1750000, .max = 3500000},
	.n = { .min = 1, .max = 4 },
	.m = { .min = 104, .max = 138 },
	.m1 = { .min = 17, .max = 23 },
	.m2 = { .min = 5, .max = 11 },
	.p = { .min = 10, .max = 30 },
	.p1 = { .min = 1, .max = 3},
	.p2 = { .dot_limit = 270000,
		.p2_slow = 10,
		.p2_fast = 10
	},
	.find_pll = intel_g4x_find_best_PLL,
};

static const intel_limit_t intel_limits_g4x_hdmi = {
	.dot = { .min = 22000, .max = 400000 },
	.vco = { .min = 1750000, .max = 3500000},
	.n = { .min = 1, .max = 4 },
	.m = { .min = 104, .max = 138 },
	.m1 = { .min = 16, .max = 23 },
	.m2 = { .min = 5, .max = 11 },
	.p = { .min = 5, .max = 80 },
	.p1 = { .min = 1, .max = 8},
	.p2 = { .dot_limit = 165000,
		.p2_slow = 10, .p2_fast = 5 },
	.find_pll = intel_g4x_find_best_PLL,
};

static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
	.dot = { .min = 20000, .max = 115000 },
	.vco = { .min = 1750000, .max = 3500000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 104, .max = 138 },
	.m1 = { .min = 17, .max = 23 },
	.m2 = { .min = 5, .max = 11 },
	.p = { .min = 28, .max = 112 },
	.p1 = { .min = 2, .max = 8 },
	.p2 = { .dot_limit = 0,
		.p2_slow = 14, .p2_fast = 14
	},
	.find_pll = intel_g4x_find_best_PLL,
};

static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
	.dot = { .min = 80000, .max = 224000 },
	.vco = { .min = 1750000, .max = 3500000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 104, .max = 138 },
	.m1 = { .min = 17, .max = 23 },
	.m2 = { .min = 5, .max = 11 },
	.p = { .min = 14, .max = 42 },
	.p1 = { .min = 2, .max = 6 },
	.p2 = { .dot_limit = 0,
		.p2_slow = 7, .p2_fast = 7
	},
	.find_pll = intel_g4x_find_best_PLL,
};

static const intel_limit_t intel_limits_g4x_display_port = {
        .dot = { .min = 161670, .max = 227000 },
        .vco = { .min = 1750000, .max = 3500000},
        .n = { .min = 1, .max = 2 },
        .m = { .min = 97, .max = 108 },
        .m1 = { .min = 0x10, .max = 0x12 },
        .m2 = { .min = 0x05, .max = 0x06 },
        .p = { .min = 10, .max = 20 },
        .p1 = { .min = 1, .max = 2},
        .p2 = { .dot_limit = 0,
		.p2_slow = 10, .p2_fast = 10 },
        .find_pll = intel_find_pll_g4x_dp,
};

static const intel_limit_t intel_limits_pineview_sdvo = {
        .dot = { .min = 20000, .max = 400000},
        .vco = { .min = 1700000, .max = 3500000 },
	/* Pineview's Ncounter is a ring counter */
        .n = { .min = 3, .max = 6 },
        .m = { .min = 2, .max = 256 },
	/* Pineview only has one combined m divider, which we treat as m2. */
        .m1 = { .min = 0, .max = 0 },
        .m2 = { .min = 0, .max = 254 },
        .p = { .min = 5, .max = 80 },
        .p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 200000,
		.p2_slow = 10, .p2_fast = 5 },
	.find_pll = intel_find_best_PLL,
};

static const intel_limit_t intel_limits_pineview_lvds = {
        .dot = { .min = 20000, .max = 400000 },
        .vco = { .min = 1700000, .max = 3500000 },
        .n = { .min = 3, .max = 6 },
        .m = { .min = 2, .max = 256 },
        .m1 = { .min = 0, .max = 0 },
        .m2 = { .min = 0, .max = 254 },
        .p = { .min = 7, .max = 112 },
        .p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 112000,
		.p2_slow = 14, .p2_fast = 14 },
	.find_pll = intel_find_best_PLL,
};

/* Ironlake / Sandybridge
 *
 * We calculate clock using (register_value + 2) for N/M1/M2, so here
 * the range value for them is (actual_value - 2).
 */
static const intel_limit_t intel_limits_ironlake_dac = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 5 },
	.m = { .min = 79, .max = 127 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 5, .max = 80 },
	.p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 10, .p2_fast = 5 },
	.find_pll = intel_g4x_find_best_PLL,
};

static const intel_limit_t intel_limits_ironlake_single_lvds = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 79, .max = 118 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 28, .max = 112 },
	.p1 = { .min = 2, .max = 8 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 14, .p2_fast = 14 },
	.find_pll = intel_g4x_find_best_PLL,
};

static const intel_limit_t intel_limits_ironlake_dual_lvds = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 79, .max = 127 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 14, .max = 56 },
	.p1 = { .min = 2, .max = 8 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 7, .p2_fast = 7 },
	.find_pll = intel_g4x_find_best_PLL,
};

/* LVDS 100mhz refclk limits. */
static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 2 },
	.m = { .min = 79, .max = 126 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 28, .max = 112 },
	.p1 = { .min = 2, .max = 8 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 14, .p2_fast = 14 },
	.find_pll = intel_g4x_find_best_PLL,
};

static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 79, .max = 126 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 14, .max = 42 },
	.p1 = { .min = 2, .max = 6 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 7, .p2_fast = 7 },
	.find_pll = intel_g4x_find_best_PLL,
};

static const intel_limit_t intel_limits_ironlake_display_port = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 1760000, .max = 3510000},
        .n = { .min = 1, .max = 2 },
        .m = { .min = 81, .max = 90 },
        .m1 = { .min = 12, .max = 22 },
        .m2 = { .min = 5, .max = 9 },
        .p = { .min = 10, .max = 20 },
        .p1 = { .min = 1, .max = 2},
        .p2 = { .dot_limit = 0,
		.p2_slow = 10, .p2_fast = 10 },
        .find_pll = intel_find_pll_ironlake_dp,
};

static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
						int refclk)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	const intel_limit_t *limit;

	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
		if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
		    LVDS_CLKB_POWER_UP) {
			/* LVDS dual channel */
			if (refclk == 100000)
				limit = &intel_limits_ironlake_dual_lvds_100m;
			else
				limit = &intel_limits_ironlake_dual_lvds;
		} else {
			if (refclk == 100000)
				limit = &intel_limits_ironlake_single_lvds_100m;
			else
				limit = &intel_limits_ironlake_single_lvds;
		}
	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
			HAS_eDP)
		limit = &intel_limits_ironlake_display_port;
	else
		limit = &intel_limits_ironlake_dac;

	return limit;
}

static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	const intel_limit_t *limit;

	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
		    LVDS_CLKB_POWER_UP)
			/* LVDS with dual channel */
			limit = &intel_limits_g4x_dual_channel_lvds;
		else
			/* LVDS with dual channel */
			limit = &intel_limits_g4x_single_channel_lvds;
	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
		   intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
		limit = &intel_limits_g4x_hdmi;
	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
		limit = &intel_limits_g4x_sdvo;
	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
		limit = &intel_limits_g4x_display_port;
	} else /* The option is for other outputs */
		limit = &intel_limits_i9xx_sdvo;

	return limit;
}

static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
{
	struct drm_device *dev = crtc->dev;
	const intel_limit_t *limit;

	if (HAS_PCH_SPLIT(dev))
		limit = intel_ironlake_limit(crtc, refclk);
	else if (IS_G4X(dev)) {
		limit = intel_g4x_limit(crtc);
	} else if (IS_PINEVIEW(dev)) {
		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
			limit = &intel_limits_pineview_lvds;
		else
			limit = &intel_limits_pineview_sdvo;
	} else if (!IS_GEN2(dev)) {
		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
			limit = &intel_limits_i9xx_lvds;
		else
			limit = &intel_limits_i9xx_sdvo;
	} else {
		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
			limit = &intel_limits_i8xx_lvds;
		else
			limit = &intel_limits_i8xx_dvo;
	}
	return limit;
}

/* m1 is reserved as 0 in Pineview, n is a ring counter */
static void pineview_clock(int refclk, intel_clock_t *clock)
{
	clock->m = clock->m2 + 2;
	clock->p = clock->p1 * clock->p2;
	clock->vco = refclk * clock->m / clock->n;
	clock->dot = clock->vco / clock->p;
}

static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
{
	if (IS_PINEVIEW(dev)) {
		pineview_clock(refclk, clock);
		return;
	}
	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
	clock->p = clock->p1 * clock->p2;
	clock->vco = refclk * clock->m / (clock->n + 2);
	clock->dot = clock->vco / clock->p;
}

/**
 * Returns whether any output on the specified pipe is of the specified type
 */
bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
{
	struct drm_device *dev = crtc->dev;
	struct drm_mode_config *mode_config = &dev->mode_config;
	struct intel_encoder *encoder;

	list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
		if (encoder->base.crtc == crtc && encoder->type == type)
			return true;

	return false;
}

#define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
/**
 * Returns whether the given set of divisors are valid for a given refclk with
 * the given connectors.
 */

static bool intel_PLL_is_valid(struct drm_device *dev,
			       const intel_limit_t *limit,
			       const intel_clock_t *clock)
{
	if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
		INTELPllInvalid("p1 out of range\n");
	if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
		INTELPllInvalid("p out of range\n");
	if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
		INTELPllInvalid("m2 out of range\n");
	if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
		INTELPllInvalid("m1 out of range\n");
	if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
		INTELPllInvalid("m1 <= m2\n");
	if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
		INTELPllInvalid("m out of range\n");
	if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
		INTELPllInvalid("n out of range\n");
	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
		INTELPllInvalid("vco out of range\n");
	/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
	 * connector, etc., rather than just a single range.
	 */
	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
		INTELPllInvalid("dot out of range\n");

	return true;
}

static bool
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
		    int target, int refclk, intel_clock_t *best_clock)

{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	intel_clock_t clock;
	int err = target;

	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
	    (I915_READ(LVDS)) != 0) {
		/*
		 * For LVDS, if the panel is on, just rely on its current
		 * settings for dual-channel.  We haven't figured out how to
		 * reliably set up different single/dual channel state, if we
		 * even can.
		 */
		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
		    LVDS_CLKB_POWER_UP)
			clock.p2 = limit->p2.p2_fast;
		else
			clock.p2 = limit->p2.p2_slow;
	} else {
		if (target < limit->p2.dot_limit)
			clock.p2 = limit->p2.p2_slow;
		else
			clock.p2 = limit->p2.p2_fast;
	}

	memset(best_clock, 0, sizeof(*best_clock));

	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
	     clock.m1++) {
		for (clock.m2 = limit->m2.min;
		     clock.m2 <= limit->m2.max; clock.m2++) {
			/* m1 is always 0 in Pineview */
			if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
				break;
			for (clock.n = limit->n.min;
			     clock.n <= limit->n.max; clock.n++) {
				for (clock.p1 = limit->p1.min;
					clock.p1 <= limit->p1.max; clock.p1++) {
					int this_err;

					intel_clock(dev, refclk, &clock);
					if (!intel_PLL_is_valid(dev, limit,
								&clock))
						continue;

					this_err = abs(clock.dot - target);
					if (this_err < err) {
						*best_clock = clock;
						err = this_err;
					}
				}
			}
		}
	}

	return (err != target);
}

static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
			int target, int refclk, intel_clock_t *best_clock)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	intel_clock_t clock;
	int max_n;
	bool found;
	/* approximately equals target * 0.00585 */
	int err_most = (target >> 8) + (target >> 9);
	found = false;

	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
		int lvds_reg;

		if (HAS_PCH_SPLIT(dev))
			lvds_reg = PCH_LVDS;
		else
			lvds_reg = LVDS;
		if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
		    LVDS_CLKB_POWER_UP)
			clock.p2 = limit->p2.p2_fast;
		else
			clock.p2 = limit->p2.p2_slow;
	} else {
		if (target < limit->p2.dot_limit)
			clock.p2 = limit->p2.p2_slow;
		else
			clock.p2 = limit->p2.p2_fast;
	}

	memset(best_clock, 0, sizeof(*best_clock));
	max_n = limit->n.max;
	/* based on hardware requirement, prefer smaller n to precision */
	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
		/* based on hardware requirement, prefere larger m1,m2 */
		for (clock.m1 = limit->m1.max;
		     clock.m1 >= limit->m1.min; clock.m1--) {
			for (clock.m2 = limit->m2.max;
			     clock.m2 >= limit->m2.min; clock.m2--) {
				for (clock.p1 = limit->p1.max;
				     clock.p1 >= limit->p1.min; clock.p1--) {
					int this_err;

					intel_clock(dev, refclk, &clock);
					if (!intel_PLL_is_valid(dev, limit,
								&clock))
						continue;

					this_err = abs(clock.dot - target);
					if (this_err < err_most) {
						*best_clock = clock;
						err_most = this_err;
						max_n = clock.n;
						found = true;
					}
				}
			}
		}
	}
	return found;
}

static bool
intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
			   int target, int refclk, intel_clock_t *best_clock)
{
	struct drm_device *dev = crtc->dev;
	intel_clock_t clock;

	if (target < 200000) {
		clock.n = 1;
		clock.p1 = 2;
		clock.p2 = 10;
		clock.m1 = 12;
		clock.m2 = 9;
	} else {
		clock.n = 2;
		clock.p1 = 1;
		clock.p2 = 10;
		clock.m1 = 14;
		clock.m2 = 8;
	}
	intel_clock(dev, refclk, &clock);
	memcpy(best_clock, &clock, sizeof(intel_clock_t));
	return true;
}

/* DisplayPort has only two frequencies, 162MHz and 270MHz */
static bool
intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
		      int target, int refclk, intel_clock_t *best_clock)
{
	intel_clock_t clock;
	if (target < 200000) {
		clock.p1 = 2;
		clock.p2 = 10;
		clock.n = 2;
		clock.m1 = 23;
		clock.m2 = 8;
	} else {
		clock.p1 = 1;
		clock.p2 = 10;
		clock.n = 1;
		clock.m1 = 14;
		clock.m2 = 2;
	}
	clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
	clock.p = (clock.p1 * clock.p2);
	clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
	clock.vco = 0;
	memcpy(best_clock, &clock, sizeof(intel_clock_t));
	return true;
}

/**
 * intel_wait_for_vblank - wait for vblank on a given pipe
 * @dev: drm device
 * @pipe: pipe to wait for
 *
 * Wait for vblank to occur on a given pipe.  Needed for various bits of
 * mode setting code.
 */
void intel_wait_for_vblank(struct drm_device *dev, int pipe)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int pipestat_reg = PIPESTAT(pipe);

	/* Clear existing vblank status. Note this will clear any other
	 * sticky status fields as well.
	 *
	 * This races with i915_driver_irq_handler() with the result
	 * that either function could miss a vblank event.  Here it is not
	 * fatal, as we will either wait upon the next vblank interrupt or
	 * timeout.  Generally speaking intel_wait_for_vblank() is only
	 * called during modeset at which time the GPU should be idle and
	 * should *not* be performing page flips and thus not waiting on
	 * vblanks...
	 * Currently, the result of us stealing a vblank from the irq
	 * handler is that a single frame will be skipped during swapbuffers.
	 */
	I915_WRITE(pipestat_reg,
		   I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);

	/* Wait for vblank interrupt bit to set */
	if (wait_for(I915_READ(pipestat_reg) &
		     PIPE_VBLANK_INTERRUPT_STATUS,
		     50))
		DRM_DEBUG_KMS("vblank wait timed out\n");
}

/*
 * intel_wait_for_pipe_off - wait for pipe to turn off
 * @dev: drm device
 * @pipe: pipe to wait for
 *
 * After disabling a pipe, we can't wait for vblank in the usual way,
 * spinning on the vblank interrupt status bit, since we won't actually
 * see an interrupt when the pipe is disabled.
 *
 * On Gen4 and above:
 *   wait for the pipe register state bit to turn off
 *
 * Otherwise:
 *   wait for the display line value to settle (it usually
 *   ends up stopping at the start of the next frame).
 *
 */
void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	if (INTEL_INFO(dev)->gen >= 4) {
		int reg = PIPECONF(pipe);

		/* Wait for the Pipe State to go off */
		if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
			     100))
			DRM_DEBUG_KMS("pipe_off wait timed out\n");
	} else {
		u32 last_line;
		int reg = PIPEDSL(pipe);
		unsigned long timeout = jiffies + msecs_to_jiffies(100);

		/* Wait for the display line to settle */
		do {
			last_line = I915_READ(reg) & DSL_LINEMASK;
			mdelay(5);
		} while (((I915_READ(reg) & DSL_LINEMASK) != last_line) &&
			 time_after(timeout, jiffies));
		if (time_after(jiffies, timeout))
			DRM_DEBUG_KMS("pipe_off wait timed out\n");
	}
}

static const char *state_string(bool enabled)
{
	return enabled ? "on" : "off";
}

/* Only for pre-ILK configs */
static void assert_pll(struct drm_i915_private *dev_priv,
		       enum pipe pipe, bool state)
{
	int reg;
	u32 val;
	bool cur_state;

	reg = DPLL(pipe);
	val = I915_READ(reg);
	cur_state = !!(val & DPLL_VCO_ENABLE);
	WARN(cur_state != state,
	     "PLL state assertion failure (expected %s, current %s)\n",
	     state_string(state), state_string(cur_state));
}
#define assert_pll_enabled(d, p) assert_pll(d, p, true)
#define assert_pll_disabled(d, p) assert_pll(d, p, false)

/* For ILK+ */
static void assert_pch_pll(struct drm_i915_private *dev_priv,
			   enum pipe pipe, bool state)
{
	int reg;
	u32 val;
	bool cur_state;

	if (HAS_PCH_CPT(dev_priv->dev)) {
		u32 pch_dpll;

		pch_dpll = I915_READ(PCH_DPLL_SEL);

		/* Make sure the selected PLL is enabled to the transcoder */
		WARN(!((pch_dpll >> (4 * pipe)) & 8),
		     "transcoder %d PLL not enabled\n", pipe);

		/* Convert the transcoder pipe number to a pll pipe number */
		pipe = (pch_dpll >> (4 * pipe)) & 1;
	}

	reg = PCH_DPLL(pipe);
	val = I915_READ(reg);
	cur_state = !!(val & DPLL_VCO_ENABLE);
	WARN(cur_state != state,
	     "PCH PLL state assertion failure (expected %s, current %s)\n",
	     state_string(state), state_string(cur_state));
}
#define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true)
#define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false)

static void assert_fdi_tx(struct drm_i915_private *dev_priv,
			  enum pipe pipe, bool state)
{
	int reg;
	u32 val;
	bool cur_state;

	reg = FDI_TX_CTL(pipe);
	val = I915_READ(reg);
	cur_state = !!(val & FDI_TX_ENABLE);
	WARN(cur_state != state,
	     "FDI TX state assertion failure (expected %s, current %s)\n",
	     state_string(state), state_string(cur_state));
}
#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)

static void assert_fdi_rx(struct drm_i915_private *dev_priv,
			  enum pipe pipe, bool state)
{
	int reg;
	u32 val;
	bool cur_state;

	reg = FDI_RX_CTL(pipe);
	val = I915_READ(reg);
	cur_state = !!(val & FDI_RX_ENABLE);
	WARN(cur_state != state,
	     "FDI RX state assertion failure (expected %s, current %s)\n",
	     state_string(state), state_string(cur_state));
}
#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)

static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
				      enum pipe pipe)
{
	int reg;
	u32 val;

	/* ILK FDI PLL is always enabled */
	if (dev_priv->info->gen == 5)
		return;

	reg = FDI_TX_CTL(pipe);
	val = I915_READ(reg);
	WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
}

static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
				      enum pipe pipe)
{
	int reg;
	u32 val;

	reg = FDI_RX_CTL(pipe);
	val = I915_READ(reg);
	WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
}

static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
				  enum pipe pipe)
{
	int pp_reg, lvds_reg;
	u32 val;
	enum pipe panel_pipe = PIPE_A;
	bool locked = true;

	if (HAS_PCH_SPLIT(dev_priv->dev)) {
		pp_reg = PCH_PP_CONTROL;
		lvds_reg = PCH_LVDS;
	} else {
		pp_reg = PP_CONTROL;
		lvds_reg = LVDS;
	}

	val = I915_READ(pp_reg);
	if (!(val & PANEL_POWER_ON) ||
	    ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
		locked = false;

	if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
		panel_pipe = PIPE_B;

	WARN(panel_pipe == pipe && locked,
	     "panel assertion failure, pipe %c regs locked\n",
	     pipe_name(pipe));
}

void assert_pipe(struct drm_i915_private *dev_priv,
			enum pipe pipe, bool state)
{
	int reg;
	u32 val;
	bool cur_state;

	reg = PIPECONF(pipe);
	val = I915_READ(reg);
	cur_state = !!(val & PIPECONF_ENABLE);
	WARN(cur_state != state,
	     "pipe %c assertion failure (expected %s, current %s)\n",
	     pipe_name(pipe), state_string(state), state_string(cur_state));
}

static void assert_plane_enabled(struct drm_i915_private *dev_priv,
				 enum plane plane)
{
	int reg;
	u32 val;

	reg = DSPCNTR(plane);
	val = I915_READ(reg);
	WARN(!(val & DISPLAY_PLANE_ENABLE),
	     "plane %c assertion failure, should be active but is disabled\n",
	     plane_name(plane));
}

static void assert_planes_disabled(struct drm_i915_private *dev_priv,
				   enum pipe pipe)
{
	int reg, i;
	u32 val;
	int cur_pipe;

	/* Planes are fixed to pipes on ILK+ */
	if (HAS_PCH_SPLIT(dev_priv->dev))
		return;

	/* Need to check both planes against the pipe */
	for (i = 0; i < 2; i++) {
		reg = DSPCNTR(i);
		val = I915_READ(reg);
		cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
			DISPPLANE_SEL_PIPE_SHIFT;
		WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
		     "plane %c assertion failure, should be off on pipe %c but is still active\n",
		     plane_name(i), pipe_name(pipe));
	}
}

static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
{
	u32 val;
	bool enabled;

	val = I915_READ(PCH_DREF_CONTROL);
	enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
			    DREF_SUPERSPREAD_SOURCE_MASK));
	WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
}

static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
				       enum pipe pipe)
{
	int reg;
	u32 val;
	bool enabled;

	reg = TRANSCONF(pipe);
	val = I915_READ(reg);
	enabled = !!(val & TRANS_ENABLE);
	WARN(enabled,
	     "transcoder assertion failed, should be off on pipe %c but is still active\n",
	     pipe_name(pipe));
}

static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
			    enum pipe pipe, u32 port_sel, u32 val)
{
	if ((val & DP_PORT_EN) == 0)
		return false;

	if (HAS_PCH_CPT(dev_priv->dev)) {
		u32	trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
		u32	trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
		if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
			return false;
	} else {
		if ((val & DP_PIPE_MASK) != (pipe << 30))
			return false;
	}
	return true;
}

static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
			      enum pipe pipe, u32 val)
{
	if ((val & PORT_ENABLE) == 0)
		return false;

	if (HAS_PCH_CPT(dev_priv->dev)) {
		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
			return false;
	} else {
		if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
			return false;
	}
	return true;
}

static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
			      enum pipe pipe, u32 val)
{
	if ((val & LVDS_PORT_EN) == 0)
		return false;

	if (HAS_PCH_CPT(dev_priv->dev)) {
		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
			return false;
	} else {
		if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
			return false;
	}
	return true;
}

static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
			      enum pipe pipe, u32 val)
{
	if ((val & ADPA_DAC_ENABLE) == 0)
		return false;
	if (HAS_PCH_CPT(dev_priv->dev)) {
		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
			return false;
	} else {
		if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
			return false;
	}
	return true;
}

static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
				   enum pipe pipe, int reg, u32 port_sel)
{
	u32 val = I915_READ(reg);
	WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
	     "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
	     reg, pipe_name(pipe));
}

static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
				     enum pipe pipe, int reg)
{
	u32 val = I915_READ(reg);
	WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
	     "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
	     reg, pipe_name(pipe));
}

static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
				      enum pipe pipe)
{
	int reg;
	u32 val;

	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);

	reg = PCH_ADPA;
	val = I915_READ(reg);
	WARN(adpa_pipe_enabled(dev_priv, val, pipe),
	     "PCH VGA enabled on transcoder %c, should be disabled\n",
	     pipe_name(pipe));

	reg = PCH_LVDS;
	val = I915_READ(reg);
	WARN(lvds_pipe_enabled(dev_priv, val, pipe),
	     "PCH LVDS enabled on transcoder %c, should be disabled\n",
	     pipe_name(pipe));

	assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB);
	assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC);
	assert_pch_hdmi_disabled(dev_priv, pipe, HDMID);
}

/**
 * intel_enable_pll - enable a PLL
 * @dev_priv: i915 private structure
 * @pipe: pipe PLL to enable
 *
 * Enable @pipe's PLL so we can start pumping pixels from a plane.  Check to
 * make sure the PLL reg is writable first though, since the panel write
 * protect mechanism may be enabled.
 *
 * Note!  This is for pre-ILK only.
 */
static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
    int reg;
    u32 val;

    /* No really, not for ILK+ */
    BUG_ON(dev_priv->info->gen >= 5);

    /* PLL is protected by panel, make sure we can write it */
    if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
        assert_panel_unlocked(dev_priv, pipe);

    reg = DPLL(pipe);
    val = I915_READ(reg);
    val |= DPLL_VCO_ENABLE;

    /* We do this three times for luck */
    I915_WRITE(reg, val);
    POSTING_READ(reg);
    udelay(150); /* wait for warmup */
    I915_WRITE(reg, val);
    POSTING_READ(reg);
    udelay(150); /* wait for warmup */
    I915_WRITE(reg, val);
    POSTING_READ(reg);
    udelay(150); /* wait for warmup */
}

/**
 * intel_disable_pll - disable a PLL
 * @dev_priv: i915 private structure
 * @pipe: pipe PLL to disable
 *
 * Disable the PLL for @pipe, making sure the pipe is off first.
 *
 * Note!  This is for pre-ILK only.
 */
static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
	int reg;
	u32 val;

	/* Don't disable pipe A or pipe A PLLs if needed */
	if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
		return;

	/* Make sure the pipe isn't still relying on us */
	assert_pipe_disabled(dev_priv, pipe);

	reg = DPLL(pipe);
	val = I915_READ(reg);
	val &= ~DPLL_VCO_ENABLE;
	I915_WRITE(reg, val);
	POSTING_READ(reg);
}

/**
 * intel_enable_pch_pll - enable PCH PLL
 * @dev_priv: i915 private structure
 * @pipe: pipe PLL to enable
 *
 * The PCH PLL needs to be enabled before the PCH transcoder, since it
 * drives the transcoder clock.
 */
static void intel_enable_pch_pll(struct drm_i915_private *dev_priv,
				 enum pipe pipe)
{
	int reg;
	u32 val;

	if (pipe > 1)
		return;

	/* PCH only available on ILK+ */
	BUG_ON(dev_priv->info->gen < 5);

	/* PCH refclock must be enabled first */
	assert_pch_refclk_enabled(dev_priv);

	reg = PCH_DPLL(pipe);
	val = I915_READ(reg);
	val |= DPLL_VCO_ENABLE;
	I915_WRITE(reg, val);
	POSTING_READ(reg);
	udelay(200);
}

static void intel_disable_pch_pll(struct drm_i915_private *dev_priv,
				  enum pipe pipe)
{
	int reg;
	u32 val, pll_mask = TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL,
		pll_sel = TRANSC_DPLL_ENABLE;

	if (pipe > 1)
		return;

	/* PCH only available on ILK+ */
	BUG_ON(dev_priv->info->gen < 5);

	/* Make sure transcoder isn't still depending on us */
	assert_transcoder_disabled(dev_priv, pipe);

	if (pipe == 0)
		pll_sel |= TRANSC_DPLLA_SEL;
	else if (pipe == 1)
		pll_sel |= TRANSC_DPLLB_SEL;


	if ((I915_READ(PCH_DPLL_SEL) & pll_mask) == pll_sel)
		return;

	reg = PCH_DPLL(pipe);
	val = I915_READ(reg);
	val &= ~DPLL_VCO_ENABLE;
	I915_WRITE(reg, val);
	POSTING_READ(reg);
	udelay(200);
}

static void intel_enable_transcoder(struct drm_i915_private *dev_priv,
				    enum pipe pipe)
{
	int reg;
	u32 val;

	/* PCH only available on ILK+ */
	BUG_ON(dev_priv->info->gen < 5);

	/* Make sure PCH DPLL is enabled */
	assert_pch_pll_enabled(dev_priv, pipe);

	/* FDI must be feeding us bits for PCH ports */
	assert_fdi_tx_enabled(dev_priv, pipe);
	assert_fdi_rx_enabled(dev_priv, pipe);

	reg = TRANSCONF(pipe);
	val = I915_READ(reg);

	if (HAS_PCH_IBX(dev_priv->dev)) {
		/*
		 * make the BPC in transcoder be consistent with
		 * that in pipeconf reg.
		 */
		val &= ~PIPE_BPC_MASK;
		val |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK;
	}
	I915_WRITE(reg, val | TRANS_ENABLE);
	if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
		DRM_ERROR("failed to enable transcoder %d\n", pipe);
}

static void intel_disable_transcoder(struct drm_i915_private *dev_priv,
				     enum pipe pipe)
{
	int reg;
	u32 val;

	/* FDI relies on the transcoder */
	assert_fdi_tx_disabled(dev_priv, pipe);
	assert_fdi_rx_disabled(dev_priv, pipe);

	/* Ports must be off as well */
	assert_pch_ports_disabled(dev_priv, pipe);

	reg = TRANSCONF(pipe);
	val = I915_READ(reg);
	val &= ~TRANS_ENABLE;
	I915_WRITE(reg, val);
	/* wait for PCH transcoder off, transcoder state */
	if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
		DRM_ERROR("failed to disable transcoder %d\n", pipe);
}

/**
 * intel_enable_pipe - enable a pipe, asserting requirements
 * @dev_priv: i915 private structure
 * @pipe: pipe to enable
 * @pch_port: on ILK+, is this pipe driving a PCH port or not
 *
 * Enable @pipe, making sure that various hardware specific requirements
 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
 *
 * @pipe should be %PIPE_A or %PIPE_B.
 *
 * Will wait until the pipe is actually running (i.e. first vblank) before
 * returning.
 */
static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
			      bool pch_port)
{
	int reg;
	u32 val;

	/*
	 * A pipe without a PLL won't actually be able to drive bits from
	 * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
	 * need the check.
	 */
	if (!HAS_PCH_SPLIT(dev_priv->dev))
		assert_pll_enabled(dev_priv, pipe);
	else {
		if (pch_port) {
			/* if driving the PCH, we need FDI enabled */
			assert_fdi_rx_pll_enabled(dev_priv, pipe);
			assert_fdi_tx_pll_enabled(dev_priv, pipe);
		}
		/* FIXME: assert CPU port conditions for SNB+ */
	}

	reg = PIPECONF(pipe);
	val = I915_READ(reg);
	if (val & PIPECONF_ENABLE)
		return;

	I915_WRITE(reg, val | PIPECONF_ENABLE);
	intel_wait_for_vblank(dev_priv->dev, pipe);
}

/**
 * intel_disable_pipe - disable a pipe, asserting requirements
 * @dev_priv: i915 private structure
 * @pipe: pipe to disable
 *
 * Disable @pipe, making sure that various hardware specific requirements
 * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
 *
 * @pipe should be %PIPE_A or %PIPE_B.
 *
 * Will wait until the pipe has shut down before returning.
 */
static void intel_disable_pipe(struct drm_i915_private *dev_priv,
			       enum pipe pipe)
{
	int reg;
	u32 val;

	/*
	 * Make sure planes won't keep trying to pump pixels to us,
	 * or we might hang the display.
	 */
	assert_planes_disabled(dev_priv, pipe);

	/* Don't disable pipe A or pipe A PLLs if needed */
	if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
		return;

	reg = PIPECONF(pipe);
	val = I915_READ(reg);
	if ((val & PIPECONF_ENABLE) == 0)
		return;

	I915_WRITE(reg, val & ~PIPECONF_ENABLE);
	intel_wait_for_pipe_off(dev_priv->dev, pipe);
}

/*
 * Plane regs are double buffered, going from enabled->disabled needs a
 * trigger in order to latch.  The display address reg provides this.
 */
static void intel_flush_display_plane(struct drm_i915_private *dev_priv,
				      enum plane plane)
{
	I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
	I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
}

/**
 * intel_enable_plane - enable a display plane on a given pipe
 * @dev_priv: i915 private structure
 * @plane: plane to enable
 * @pipe: pipe being fed
 *
 * Enable @plane on @pipe, making sure that @pipe is running first.
 */
static void intel_enable_plane(struct drm_i915_private *dev_priv,
			       enum plane plane, enum pipe pipe)
{
	int reg;
	u32 val;

	/* If the pipe isn't enabled, we can't pump pixels and may hang */
	assert_pipe_enabled(dev_priv, pipe);

	reg = DSPCNTR(plane);
	val = I915_READ(reg);
	if (val & DISPLAY_PLANE_ENABLE)
		return;

	I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
	intel_flush_display_plane(dev_priv, plane);
	intel_wait_for_vblank(dev_priv->dev, pipe);
}

/**
 * intel_disable_plane - disable a display plane
 * @dev_priv: i915 private structure
 * @plane: plane to disable
 * @pipe: pipe consuming the data
 *
 * Disable @plane; should be an independent operation.
 */
static void intel_disable_plane(struct drm_i915_private *dev_priv,
				enum plane plane, enum pipe pipe)
{
	int reg;
	u32 val;

	reg = DSPCNTR(plane);
	val = I915_READ(reg);
	if ((val & DISPLAY_PLANE_ENABLE) == 0)
		return;

	I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
	intel_flush_display_plane(dev_priv, plane);
	intel_wait_for_vblank(dev_priv->dev, pipe);
}

static void disable_pch_dp(struct drm_i915_private *dev_priv,
			   enum pipe pipe, int reg, u32 port_sel)
{
	u32 val = I915_READ(reg);
	if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) {
		DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
		I915_WRITE(reg, val & ~DP_PORT_EN);
	}
}

static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
			     enum pipe pipe, int reg)
{
	u32 val = I915_READ(reg);
	if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
		DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
			      reg, pipe);
		I915_WRITE(reg, val & ~PORT_ENABLE);
	}
}

/* Disable any ports connected to this transcoder */
static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
				    enum pipe pipe)
{
	u32 reg, val;

	val = I915_READ(PCH_PP_CONTROL);
	I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS);

	disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
	disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
	disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);

	reg = PCH_ADPA;
	val = I915_READ(reg);
	if (adpa_pipe_enabled(dev_priv, val, pipe))
		I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);

	reg = PCH_LVDS;
	val = I915_READ(reg);
	if (lvds_pipe_enabled(dev_priv, val, pipe)) {
		DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
		I915_WRITE(reg, val & ~LVDS_PORT_EN);
		POSTING_READ(reg);
		udelay(100);
	}

	disable_pch_hdmi(dev_priv, pipe, HDMIB);
	disable_pch_hdmi(dev_priv, pipe, HDMIC);
	disable_pch_hdmi(dev_priv, pipe, HDMID);
}

static void i8xx_disable_fbc(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;
    u32 fbc_ctl;

    /* Disable compression */
    fbc_ctl = I915_READ(FBC_CONTROL);
    if ((fbc_ctl & FBC_CTL_EN) == 0)
        return;

    fbc_ctl &= ~FBC_CTL_EN;
    I915_WRITE(FBC_CONTROL, fbc_ctl);

    /* Wait for compressing bit to clear */
    if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) {
        DRM_DEBUG_KMS("FBC idle timed out\n");
        return;
    }

    DRM_DEBUG_KMS("disabled FBC\n");
}

static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct drm_framebuffer *fb = crtc->fb;
    struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
    struct drm_i915_gem_object *obj = intel_fb->obj;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int cfb_pitch;
    int plane, i;
    u32 fbc_ctl, fbc_ctl2;

    cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
	if (fb->pitches[0] < cfb_pitch)
		cfb_pitch = fb->pitches[0];

    /* FBC_CTL wants 64B units */
    cfb_pitch = (cfb_pitch / 64) - 1;
    plane = intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;

    /* Clear old tags */
    for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
        I915_WRITE(FBC_TAG + (i * 4), 0);

    /* Set it up... */
    fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE;
    fbc_ctl2 |= plane;
    I915_WRITE(FBC_CONTROL2, fbc_ctl2);
    I915_WRITE(FBC_FENCE_OFF, crtc->y);

    /* enable it... */
    fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
    if (IS_I945GM(dev))
        fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
    fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
    fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
    fbc_ctl |= obj->fence_reg;
    I915_WRITE(FBC_CONTROL, fbc_ctl);

    DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %d, ",
              cfb_pitch, crtc->y, intel_crtc->plane);
}

static bool i8xx_fbc_enabled(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;

    return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
}

static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct drm_framebuffer *fb = crtc->fb;
    struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
    struct drm_i915_gem_object *obj = intel_fb->obj;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
    unsigned long stall_watermark = 200;
    u32 dpfc_ctl;

    dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
    dpfc_ctl |= DPFC_CTL_FENCE_EN | obj->fence_reg;
    I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);

    I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
           (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
           (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
    I915_WRITE(DPFC_FENCE_YOFF, crtc->y);

    /* enable it... */
    I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);

    DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
}

static void g4x_disable_fbc(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;
    u32 dpfc_ctl;

    /* Disable compression */
    dpfc_ctl = I915_READ(DPFC_CONTROL);
    if (dpfc_ctl & DPFC_CTL_EN) {
        dpfc_ctl &= ~DPFC_CTL_EN;
        I915_WRITE(DPFC_CONTROL, dpfc_ctl);

        DRM_DEBUG_KMS("disabled FBC\n");
    }
}

static bool g4x_fbc_enabled(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;

    return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
}

static void sandybridge_blit_fbc_update(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 blt_ecoskpd;

	/* Make sure blitter notifies FBC of writes */
	gen6_gt_force_wake_get(dev_priv);
	blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
	blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
		GEN6_BLITTER_LOCK_SHIFT;
	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
	blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY;
	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
	blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY <<
			 GEN6_BLITTER_LOCK_SHIFT);
	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
	POSTING_READ(GEN6_BLITTER_ECOSKPD);
	gen6_gt_force_wake_put(dev_priv);
}

static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct drm_framebuffer *fb = crtc->fb;
    struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
    struct drm_i915_gem_object *obj = intel_fb->obj;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
    unsigned long stall_watermark = 200;
    u32 dpfc_ctl;

    dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
    dpfc_ctl &= DPFC_RESERVED;
    dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X);
    /* Set persistent mode for front-buffer rendering, ala X. */
    dpfc_ctl |= DPFC_CTL_PERSISTENT_MODE;
    dpfc_ctl |= (DPFC_CTL_FENCE_EN | obj->fence_reg);
    I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY);

    I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
           (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
           (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
    I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y);
    I915_WRITE(ILK_FBC_RT_BASE, obj->gtt_offset | ILK_FBC_RT_VALID);
    /* enable it... */
    I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN);

    if (IS_GEN6(dev)) {
        I915_WRITE(SNB_DPFC_CTL_SA,
               SNB_CPU_FENCE_ENABLE | obj->fence_reg);
        I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
        sandybridge_blit_fbc_update(dev);
    }

    DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
}

static void ironlake_disable_fbc(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;
    u32 dpfc_ctl;

    /* Disable compression */
    dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
    if (dpfc_ctl & DPFC_CTL_EN) {
        dpfc_ctl &= ~DPFC_CTL_EN;
        I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);

        DRM_DEBUG_KMS("disabled FBC\n");
    }
}

static bool ironlake_fbc_enabled(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;

    return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN;
}

bool intel_fbc_enabled(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	if (!dev_priv->display.fbc_enabled)
		return false;

	return dev_priv->display.fbc_enabled(dev);
}










static void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
{
	struct intel_fbc_work *work;
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;

	if (!dev_priv->display.enable_fbc)
		return;

//	intel_cancel_fbc_work(dev_priv);

//	work = kzalloc(sizeof *work, GFP_KERNEL);
//	if (work == NULL) {
//		dev_priv->display.enable_fbc(crtc, interval);
//		return;
//	}

//	work->crtc = crtc;
//	work->fb = crtc->fb;
//	work->interval = interval;
//	INIT_DELAYED_WORK(&work->work, intel_fbc_work_fn);

//	dev_priv->fbc_work = work;

	DRM_DEBUG_KMS("scheduling delayed FBC enable\n");

	/* Delay the actual enabling to let pageflipping cease and the
	 * display to settle before starting the compression. Note that
	 * this delay also serves a second purpose: it allows for a
	 * vblank to pass after disabling the FBC before we attempt
	 * to modify the control registers.
	 *
	 * A more complicated solution would involve tracking vblanks
	 * following the termination of the page-flipping sequence
	 * and indeed performing the enable as a co-routine and not
	 * waiting synchronously upon the vblank.
	 */
//	schedule_delayed_work(&work->work, msecs_to_jiffies(50));
}

void intel_disable_fbc(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

//   intel_cancel_fbc_work(dev_priv);

	if (!dev_priv->display.disable_fbc)
		return;

	dev_priv->display.disable_fbc(dev);
	dev_priv->cfb_plane = -1;
}

/**
 * intel_update_fbc - enable/disable FBC as needed
 * @dev: the drm_device
 *
 * Set up the framebuffer compression hardware at mode set time.  We
 * enable it if possible:
 *   - plane A only (on pre-965)
 *   - no pixel mulitply/line duplication
 *   - no alpha buffer discard
 *   - no dual wide
 *   - framebuffer <= 2048 in width, 1536 in height
 *
 * We can't assume that any compression will take place (worst case),
 * so the compressed buffer has to be the same size as the uncompressed
 * one.  It also must reside (along with the line length buffer) in
 * stolen memory.
 *
 * We need to enable/disable FBC on a global basis.
 */
static void intel_update_fbc(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct drm_crtc *crtc = NULL, *tmp_crtc;
	struct intel_crtc *intel_crtc;
	struct drm_framebuffer *fb;
	struct intel_framebuffer *intel_fb;
	struct drm_i915_gem_object *obj;
	int enable_fbc;

	DRM_DEBUG_KMS("\n");

	if (!i915_powersave)
		return;

	if (!I915_HAS_FBC(dev))
		return;

	/*
	 * If FBC is already on, we just have to verify that we can
	 * keep it that way...
	 * Need to disable if:
	 *   - more than one pipe is active
	 *   - changing FBC params (stride, fence, mode)
	 *   - new fb is too large to fit in compressed buffer
	 *   - going to an unsupported config (interlace, pixel multiply, etc.)
	 */
	list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
		if (tmp_crtc->enabled && tmp_crtc->fb) {
			if (crtc) {
				DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
                dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
				goto out_disable;
			}
			crtc = tmp_crtc;
		}
	}

	if (!crtc || crtc->fb == NULL) {
		DRM_DEBUG_KMS("no output, disabling\n");
        dev_priv->no_fbc_reason = FBC_NO_OUTPUT;
		goto out_disable;
	}

	intel_crtc = to_intel_crtc(crtc);
	fb = crtc->fb;
	intel_fb = to_intel_framebuffer(fb);
	obj = intel_fb->obj;

	enable_fbc = i915_enable_fbc;
	if (enable_fbc < 0) {
		DRM_DEBUG_KMS("fbc set to per-chip default\n");
		enable_fbc = 1;
		if (INTEL_INFO(dev)->gen <= 5)
			enable_fbc = 0;
	}
	if (!enable_fbc) {
		DRM_DEBUG_KMS("fbc disabled per module param\n");
        dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
		goto out_disable;
	}
	if (intel_fb->obj->base.size > dev_priv->cfb_size) {
		DRM_DEBUG_KMS("framebuffer too large, disabling "
			      "compression\n");
        dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
		goto out_disable;
	}
	if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) ||
	    (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) {
		DRM_DEBUG_KMS("mode incompatible with compression, "
			      "disabling\n");
        dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE;
		goto out_disable;
	}
	if ((crtc->mode.hdisplay > 2048) ||
	    (crtc->mode.vdisplay > 1536)) {
		DRM_DEBUG_KMS("mode too large for compression, disabling\n");
        dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE;
		goto out_disable;
	}
	if ((IS_I915GM(dev) || IS_I945GM(dev)) && intel_crtc->plane != 0) {
		DRM_DEBUG_KMS("plane not 0, disabling compression\n");
        dev_priv->no_fbc_reason = FBC_BAD_PLANE;
		goto out_disable;
	}

	/* The use of a CPU fence is mandatory in order to detect writes
	 * by the CPU to the scanout and trigger updates to the FBC.
	 */
//	if (obj->tiling_mode != I915_TILING_X ||
//	    obj->fence_reg == I915_FENCE_REG_NONE) {
//		DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n");
//		dev_priv->no_fbc_reason = FBC_NOT_TILED;
//		goto out_disable;
//	}

	/* If the kernel debugger is active, always disable compression */
	if (in_dbg_master())
		goto out_disable;

	/* If the scanout has not changed, don't modify the FBC settings.
	 * Note that we make the fundamental assumption that the fb->obj
	 * cannot be unpinned (and have its GTT offset and fence revoked)
	 * without first being decoupled from the scanout and FBC disabled.
	 */
	if (dev_priv->cfb_plane == intel_crtc->plane &&
	    dev_priv->cfb_fb == fb->base.id &&
	    dev_priv->cfb_y == crtc->y)
		return;

	if (intel_fbc_enabled(dev)) {
		/* We update FBC along two paths, after changing fb/crtc
		 * configuration (modeswitching) and after page-flipping
		 * finishes. For the latter, we know that not only did
		 * we disable the FBC at the start of the page-flip
		 * sequence, but also more than one vblank has passed.
		 *
		 * For the former case of modeswitching, it is possible
		 * to switch between two FBC valid configurations
		 * instantaneously so we do need to disable the FBC
		 * before we can modify its control registers. We also
		 * have to wait for the next vblank for that to take
		 * effect. However, since we delay enabling FBC we can
		 * assume that a vblank has passed since disabling and
		 * that we can safely alter the registers in the deferred
		 * callback.
		 *
		 * In the scenario that we go from a valid to invalid
		 * and then back to valid FBC configuration we have
		 * no strict enforcement that a vblank occurred since
		 * disabling the FBC. However, along all current pipe
		 * disabling paths we do need to wait for a vblank at
		 * some point. And we wait before enabling FBC anyway.
		 */
		DRM_DEBUG_KMS("disabling active FBC for update\n");
		intel_disable_fbc(dev);
	}

	intel_enable_fbc(crtc, 500);
	return;

out_disable:
	/* Multiple disables should be harmless */
	if (intel_fbc_enabled(dev)) {
		DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
		intel_disable_fbc(dev);
	}
}

int
intel_pin_and_fence_fb_obj(struct drm_device *dev,
			   struct drm_i915_gem_object *obj,
			   struct intel_ring_buffer *pipelined)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 alignment;
	int ret;

	switch (obj->tiling_mode) {
	case I915_TILING_NONE:
		if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
			alignment = 128 * 1024;
		else if (INTEL_INFO(dev)->gen >= 4)
			alignment = 4 * 1024;
		else
			alignment = 64 * 1024;
		break;
	case I915_TILING_X:
		/* pin() will align the object as required by fence */
		alignment = 0;
		break;
	case I915_TILING_Y:
		/* FIXME: Is this true? */
		DRM_ERROR("Y tiled not allowed for scan out buffers\n");
		return -EINVAL;
	default:
		BUG();
	}

	dev_priv->mm.interruptible = false;
	ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
	if (ret)
		goto err_interruptible;

	/* Install a fence for tiled scan-out. Pre-i965 always needs a
	 * fence, whereas 965+ only requires a fence if using
	 * framebuffer compression.  For simplicity, we always install
	 * a fence as the cost is not that onerous.
	 */
//	if (obj->tiling_mode != I915_TILING_NONE) {
//		ret = i915_gem_object_get_fence(obj, pipelined);
//		if (ret)
//			goto err_unpin;
//	}

	dev_priv->mm.interruptible = true;
	return 0;

err_unpin:
	i915_gem_object_unpin(obj);
err_interruptible:
	dev_priv->mm.interruptible = true;
	return ret;
}

static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
                 int x, int y)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    struct intel_framebuffer *intel_fb;
    struct drm_i915_gem_object *obj;
    int plane = intel_crtc->plane;
    unsigned long Start, Offset;
    u32 dspcntr;
    u32 reg;

    switch (plane) {
    case 0:
    case 1:
        break;
    default:
        DRM_ERROR("Can't update plane %d in SAREA\n", plane);
        return -EINVAL;
    }

    intel_fb = to_intel_framebuffer(fb);
    obj = intel_fb->obj;

    reg = DSPCNTR(plane);
    dspcntr = I915_READ(reg);
    /* Mask out pixel format bits in case we change it */
    dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
    switch (fb->bits_per_pixel) {
    case 8:
        dspcntr |= DISPPLANE_8BPP;
        break;
    case 16:
        if (fb->depth == 15)
            dspcntr |= DISPPLANE_15_16BPP;
        else
            dspcntr |= DISPPLANE_16BPP;
        break;
    case 24:
    case 32:
        dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
        break;
    default:
        DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
        return -EINVAL;
    }
    if (INTEL_INFO(dev)->gen >= 4) {
        if (obj->tiling_mode != I915_TILING_NONE)
            dspcntr |= DISPPLANE_TILED;
        else
            dspcntr &= ~DISPPLANE_TILED;
    }

    I915_WRITE(reg, dspcntr);

    Start = obj->gtt_offset;
	Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);

    DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
		      Start, Offset, x, y, fb->pitches[0]);
	I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
    if (INTEL_INFO(dev)->gen >= 4) {
        I915_WRITE(DSPSURF(plane), Start);
        I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
        I915_WRITE(DSPADDR(plane), Offset);
    } else
        I915_WRITE(DSPADDR(plane), Start + Offset);
    POSTING_READ(reg);

    return 0;
}

static int ironlake_update_plane(struct drm_crtc *crtc,
                 struct drm_framebuffer *fb, int x, int y)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    struct intel_framebuffer *intel_fb;
    struct drm_i915_gem_object *obj;
    int plane = intel_crtc->plane;
    unsigned long Start, Offset;
    u32 dspcntr;
    u32 reg;

    switch (plane) {
    case 0:
    case 1:
	case 2:
        break;
    default:
        DRM_ERROR("Can't update plane %d in SAREA\n", plane);
        return -EINVAL;
    }

    intel_fb = to_intel_framebuffer(fb);
    obj = intel_fb->obj;

    reg = DSPCNTR(plane);
    dspcntr = I915_READ(reg);
    /* Mask out pixel format bits in case we change it */
    dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
    switch (fb->bits_per_pixel) {
    case 8:
        dspcntr |= DISPPLANE_8BPP;
        break;
    case 16:
        if (fb->depth != 16)
            return -EINVAL;

        dspcntr |= DISPPLANE_16BPP;
        break;
    case 24:
    case 32:
        if (fb->depth == 24)
            dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
        else if (fb->depth == 30)
            dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
        else
            return -EINVAL;
        break;
    default:
        DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
        return -EINVAL;
    }

//    if (obj->tiling_mode != I915_TILING_NONE)
//        dspcntr |= DISPPLANE_TILED;
//    else
        dspcntr &= ~DISPPLANE_TILED;

    /* must disable */
    dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;

    I915_WRITE(reg, dspcntr);

    Start = obj->gtt_offset;
	Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);

    DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
		      Start, Offset, x, y, fb->pitches[0]);
	I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
	I915_WRITE(DSPSURF(plane), Start);
	I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
	I915_WRITE(DSPADDR(plane), Offset);
	POSTING_READ(reg);

    return 0;
}

/* Assume fb object is pinned & idle & fenced and just update base pointers */
static int
intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
			   int x, int y, enum mode_set_atomic state)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	int ret;

    ENTER();

	ret = dev_priv->display.update_plane(crtc, fb, x, y);
	if (ret)
    {
        LEAVE();
		return ret;
    };

	intel_update_fbc(dev);
	intel_increase_pllclock(crtc);
    LEAVE();

	return 0;
}

static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
		    struct drm_framebuffer *old_fb)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_master_private *master_priv;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int ret;

    ENTER();

	/* no fb bound */
	if (!crtc->fb) {
		DRM_ERROR("No FB bound\n");
		return 0;
	}

	switch (intel_crtc->plane) {
	case 0:
	case 1:
		break;
	case 2:
		if (IS_IVYBRIDGE(dev))
			break;
		/* fall through otherwise */
	default:
		DRM_ERROR("no plane for crtc\n");
		return -EINVAL;
	}

	mutex_lock(&dev->struct_mutex);

    ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
					 LEAVE_ATOMIC_MODE_SET);
	if (ret) {
		i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
		mutex_unlock(&dev->struct_mutex);
		DRM_ERROR("failed to update base address\n");
        LEAVE();
		return ret;
	}

	mutex_unlock(&dev->struct_mutex);


    LEAVE();
    return 0;

#if 0
	if (!dev->primary->master)
    {
        LEAVE();
		return 0;
    };

	master_priv = dev->primary->master->driver_priv;
	if (!master_priv->sarea_priv)
    {
        LEAVE();
		return 0;
    };

	if (intel_crtc->pipe) {
		master_priv->sarea_priv->pipeB_x = x;
		master_priv->sarea_priv->pipeB_y = y;
	} else {
		master_priv->sarea_priv->pipeA_x = x;
		master_priv->sarea_priv->pipeA_y = y;
	}
    LEAVE();

	return 0;
#endif

}

static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 dpa_ctl;

	DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
	dpa_ctl = I915_READ(DP_A);
	dpa_ctl &= ~DP_PLL_FREQ_MASK;

	if (clock < 200000) {
		u32 temp;
		dpa_ctl |= DP_PLL_FREQ_160MHZ;
		/* workaround for 160Mhz:
		   1) program 0x4600c bits 15:0 = 0x8124
		   2) program 0x46010 bit 0 = 1
		   3) program 0x46034 bit 24 = 1
		   4) program 0x64000 bit 14 = 1
		   */
		temp = I915_READ(0x4600c);
		temp &= 0xffff0000;
		I915_WRITE(0x4600c, temp | 0x8124);

		temp = I915_READ(0x46010);
		I915_WRITE(0x46010, temp | 1);

		temp = I915_READ(0x46034);
		I915_WRITE(0x46034, temp | (1 << 24));
	} else {
		dpa_ctl |= DP_PLL_FREQ_270MHZ;
	}
	I915_WRITE(DP_A, dpa_ctl);

	POSTING_READ(DP_A);
	udelay(500);
}

static void intel_fdi_normal_train(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int pipe = intel_crtc->pipe;
	u32 reg, temp;

	/* enable normal train */
	reg = FDI_TX_CTL(pipe);
	temp = I915_READ(reg);
	if (IS_IVYBRIDGE(dev)) {
		temp &= ~FDI_LINK_TRAIN_NONE_IVB;
		temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
	} else {
		temp &= ~FDI_LINK_TRAIN_NONE;
		temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
	}
	I915_WRITE(reg, temp);

	reg = FDI_RX_CTL(pipe);
	temp = I915_READ(reg);
	if (HAS_PCH_CPT(dev)) {
		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
	} else {
		temp &= ~FDI_LINK_TRAIN_NONE;
		temp |= FDI_LINK_TRAIN_NONE;
	}
	I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);

	/* wait one idle pattern time */
	POSTING_READ(reg);
	udelay(1000);

	/* IVB wants error correction enabled */
	if (IS_IVYBRIDGE(dev))
		I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
			   FDI_FE_ERRC_ENABLE);
}

static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 flags = I915_READ(SOUTH_CHICKEN1);

	flags |= FDI_PHASE_SYNC_OVR(pipe);
	I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
	flags |= FDI_PHASE_SYNC_EN(pipe);
	I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
	POSTING_READ(SOUTH_CHICKEN1);
}

/* The FDI link training functions for ILK/Ibexpeak. */
static void ironlake_fdi_link_train(struct drm_crtc *crtc)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    int plane = intel_crtc->plane;
    u32 reg, temp, tries;

    /* FDI needs bits from pipe & plane first */
    assert_pipe_enabled(dev_priv, pipe);
    assert_plane_enabled(dev_priv, plane);

    /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
       for train result */
    reg = FDI_RX_IMR(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_RX_SYMBOL_LOCK;
    temp &= ~FDI_RX_BIT_LOCK;
    I915_WRITE(reg, temp);
    I915_READ(reg);
    udelay(150);

    /* enable CPU FDI TX and PCH FDI RX */
    reg = FDI_TX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~(7 << 19);
    temp |= (intel_crtc->fdi_lanes - 1) << 19;
    temp &= ~FDI_LINK_TRAIN_NONE;
    temp |= FDI_LINK_TRAIN_PATTERN_1;
    I915_WRITE(reg, temp | FDI_TX_ENABLE);

    reg = FDI_RX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_LINK_TRAIN_NONE;
    temp |= FDI_LINK_TRAIN_PATTERN_1;
    I915_WRITE(reg, temp | FDI_RX_ENABLE);

    POSTING_READ(reg);
    udelay(150);

    /* Ironlake workaround, enable clock pointer after FDI enable*/
    if (HAS_PCH_IBX(dev)) {
        I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
        I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
               FDI_RX_PHASE_SYNC_POINTER_EN);
    }

    reg = FDI_RX_IIR(pipe);
    for (tries = 0; tries < 5; tries++) {
        temp = I915_READ(reg);
        DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);

        if ((temp & FDI_RX_BIT_LOCK)) {
            DRM_DEBUG_KMS("FDI train 1 done.\n");
            I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
            break;
        }
    }
    if (tries == 5)
        DRM_ERROR("FDI train 1 fail!\n");

    /* Train 2 */
    reg = FDI_TX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_LINK_TRAIN_NONE;
    temp |= FDI_LINK_TRAIN_PATTERN_2;
    I915_WRITE(reg, temp);

    reg = FDI_RX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_LINK_TRAIN_NONE;
    temp |= FDI_LINK_TRAIN_PATTERN_2;
    I915_WRITE(reg, temp);

    POSTING_READ(reg);
    udelay(150);

    reg = FDI_RX_IIR(pipe);
    for (tries = 0; tries < 5; tries++) {
        temp = I915_READ(reg);
        DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);

        if (temp & FDI_RX_SYMBOL_LOCK) {
            I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
            DRM_DEBUG_KMS("FDI train 2 done.\n");
            break;
        }
    }
    if (tries == 5)
        DRM_ERROR("FDI train 2 fail!\n");

    DRM_DEBUG_KMS("FDI train done\n");

}

static const int snb_b_fdi_train_param[] = {
    FDI_LINK_TRAIN_400MV_0DB_SNB_B,
    FDI_LINK_TRAIN_400MV_6DB_SNB_B,
    FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
    FDI_LINK_TRAIN_800MV_0DB_SNB_B,
};

/* The FDI link training functions for SNB/Cougarpoint. */
static void gen6_fdi_link_train(struct drm_crtc *crtc)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    u32 reg, temp, i;

    /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
       for train result */
    reg = FDI_RX_IMR(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_RX_SYMBOL_LOCK;
    temp &= ~FDI_RX_BIT_LOCK;
    I915_WRITE(reg, temp);

    POSTING_READ(reg);
    udelay(150);

    /* enable CPU FDI TX and PCH FDI RX */
    reg = FDI_TX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~(7 << 19);
    temp |= (intel_crtc->fdi_lanes - 1) << 19;
    temp &= ~FDI_LINK_TRAIN_NONE;
    temp |= FDI_LINK_TRAIN_PATTERN_1;
    temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
    /* SNB-B */
    temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
    I915_WRITE(reg, temp | FDI_TX_ENABLE);

    reg = FDI_RX_CTL(pipe);
    temp = I915_READ(reg);
    if (HAS_PCH_CPT(dev)) {
        temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
        temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
    } else {
        temp &= ~FDI_LINK_TRAIN_NONE;
        temp |= FDI_LINK_TRAIN_PATTERN_1;
    }
    I915_WRITE(reg, temp | FDI_RX_ENABLE);

    POSTING_READ(reg);
    udelay(150);

    if (HAS_PCH_CPT(dev))
        cpt_phase_pointer_enable(dev, pipe);

	for (i = 0; i < 4; i++) {
        reg = FDI_TX_CTL(pipe);
        temp = I915_READ(reg);
        temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
        temp |= snb_b_fdi_train_param[i];
        I915_WRITE(reg, temp);

        POSTING_READ(reg);
        udelay(500);

        reg = FDI_RX_IIR(pipe);
        temp = I915_READ(reg);
        DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);

        if (temp & FDI_RX_BIT_LOCK) {
            I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
            DRM_DEBUG_KMS("FDI train 1 done.\n");
            break;
        }
    }
    if (i == 4)
        DRM_ERROR("FDI train 1 fail!\n");

    /* Train 2 */
    reg = FDI_TX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_LINK_TRAIN_NONE;
    temp |= FDI_LINK_TRAIN_PATTERN_2;
    if (IS_GEN6(dev)) {
        temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
        /* SNB-B */
        temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
    }
    I915_WRITE(reg, temp);

    reg = FDI_RX_CTL(pipe);
    temp = I915_READ(reg);
    if (HAS_PCH_CPT(dev)) {
        temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
        temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
    } else {
        temp &= ~FDI_LINK_TRAIN_NONE;
        temp |= FDI_LINK_TRAIN_PATTERN_2;
    }
    I915_WRITE(reg, temp);

    POSTING_READ(reg);
    udelay(150);

	for (i = 0; i < 4; i++) {
        reg = FDI_TX_CTL(pipe);
        temp = I915_READ(reg);
        temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
        temp |= snb_b_fdi_train_param[i];
        I915_WRITE(reg, temp);

        POSTING_READ(reg);
        udelay(500);

        reg = FDI_RX_IIR(pipe);
        temp = I915_READ(reg);
        DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);

        if (temp & FDI_RX_SYMBOL_LOCK) {
            I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
            DRM_DEBUG_KMS("FDI train 2 done.\n");
            break;
        }
    }
    if (i == 4)
        DRM_ERROR("FDI train 2 fail!\n");

    DRM_DEBUG_KMS("FDI train done.\n");
}

/* Manual link training for Ivy Bridge A0 parts */
static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    u32 reg, temp, i;

    /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
       for train result */
    reg = FDI_RX_IMR(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_RX_SYMBOL_LOCK;
    temp &= ~FDI_RX_BIT_LOCK;
    I915_WRITE(reg, temp);

    POSTING_READ(reg);
    udelay(150);

    /* enable CPU FDI TX and PCH FDI RX */
    reg = FDI_TX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~(7 << 19);
    temp |= (intel_crtc->fdi_lanes - 1) << 19;
    temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
    temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
    temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
    temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
	temp |= FDI_COMPOSITE_SYNC;
    I915_WRITE(reg, temp | FDI_TX_ENABLE);

    reg = FDI_RX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_LINK_TRAIN_AUTO;
    temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
    temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
	temp |= FDI_COMPOSITE_SYNC;
    I915_WRITE(reg, temp | FDI_RX_ENABLE);

    POSTING_READ(reg);
    udelay(150);

    if (HAS_PCH_CPT(dev))
        cpt_phase_pointer_enable(dev, pipe);

	for (i = 0; i < 4; i++) {
        reg = FDI_TX_CTL(pipe);
        temp = I915_READ(reg);
        temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
        temp |= snb_b_fdi_train_param[i];
        I915_WRITE(reg, temp);

        POSTING_READ(reg);
        udelay(500);

        reg = FDI_RX_IIR(pipe);
        temp = I915_READ(reg);
        DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);

        if (temp & FDI_RX_BIT_LOCK ||
            (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
            I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
            DRM_DEBUG_KMS("FDI train 1 done.\n");
            break;
        }
    }
    if (i == 4)
        DRM_ERROR("FDI train 1 fail!\n");

    /* Train 2 */
    reg = FDI_TX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_LINK_TRAIN_NONE_IVB;
    temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
    temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
    temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
    I915_WRITE(reg, temp);

    reg = FDI_RX_CTL(pipe);
    temp = I915_READ(reg);
    temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
    temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
    I915_WRITE(reg, temp);

    POSTING_READ(reg);
    udelay(150);

	for (i = 0; i < 4; i++) {
        reg = FDI_TX_CTL(pipe);
        temp = I915_READ(reg);
        temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
        temp |= snb_b_fdi_train_param[i];
        I915_WRITE(reg, temp);

        POSTING_READ(reg);
        udelay(500);

        reg = FDI_RX_IIR(pipe);
        temp = I915_READ(reg);
        DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);

        if (temp & FDI_RX_SYMBOL_LOCK) {
            I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
            DRM_DEBUG_KMS("FDI train 2 done.\n");
            break;
        }
    }
    if (i == 4)
        DRM_ERROR("FDI train 2 fail!\n");

    DRM_DEBUG_KMS("FDI train done.\n");
}

static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int pipe = intel_crtc->pipe;
	u32 reg, temp;

	/* Write the TU size bits so error detection works */
	I915_WRITE(FDI_RX_TUSIZE1(pipe),
		   I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);

	/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
	reg = FDI_RX_CTL(pipe);
	temp = I915_READ(reg);
	temp &= ~((0x7 << 19) | (0x7 << 16));
	temp |= (intel_crtc->fdi_lanes - 1) << 19;
	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
	I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);

	POSTING_READ(reg);
	udelay(200);

	/* Switch from Rawclk to PCDclk */
	temp = I915_READ(reg);
	I915_WRITE(reg, temp | FDI_PCDCLK);

	POSTING_READ(reg);
	udelay(200);

	/* Enable CPU FDI TX PLL, always on for Ironlake */
	reg = FDI_TX_CTL(pipe);
	temp = I915_READ(reg);
	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
		I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);

		POSTING_READ(reg);
		udelay(100);
	}
}

static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 flags = I915_READ(SOUTH_CHICKEN1);

	flags &= ~(FDI_PHASE_SYNC_EN(pipe));
	I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
	flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
	I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
	POSTING_READ(SOUTH_CHICKEN1);
}
static void ironlake_fdi_disable(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int pipe = intel_crtc->pipe;
	u32 reg, temp;

	/* disable CPU FDI tx and PCH FDI rx */
	reg = FDI_TX_CTL(pipe);
	temp = I915_READ(reg);
	I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
	POSTING_READ(reg);

	reg = FDI_RX_CTL(pipe);
	temp = I915_READ(reg);
	temp &= ~(0x7 << 16);
	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
	I915_WRITE(reg, temp & ~FDI_RX_ENABLE);

	POSTING_READ(reg);
	udelay(100);

	/* Ironlake workaround, disable clock pointer after downing FDI */
	if (HAS_PCH_IBX(dev)) {
		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
		I915_WRITE(FDI_RX_CHICKEN(pipe),
			   I915_READ(FDI_RX_CHICKEN(pipe) &
				     ~FDI_RX_PHASE_SYNC_POINTER_EN));
	} else if (HAS_PCH_CPT(dev)) {
		cpt_phase_pointer_disable(dev, pipe);
	}

	/* still set train pattern 1 */
	reg = FDI_TX_CTL(pipe);
	temp = I915_READ(reg);
	temp &= ~FDI_LINK_TRAIN_NONE;
	temp |= FDI_LINK_TRAIN_PATTERN_1;
	I915_WRITE(reg, temp);

	reg = FDI_RX_CTL(pipe);
	temp = I915_READ(reg);
	if (HAS_PCH_CPT(dev)) {
		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
	} else {
		temp &= ~FDI_LINK_TRAIN_NONE;
		temp |= FDI_LINK_TRAIN_PATTERN_1;
	}
	/* BPC in FDI rx is consistent with that in PIPECONF */
	temp &= ~(0x07 << 16);
	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
	I915_WRITE(reg, temp);

	POSTING_READ(reg);
	udelay(100);
}

/*
 * When we disable a pipe, we need to clear any pending scanline wait events
 * to avoid hanging the ring, which we assume we are waiting on.
 */
static void intel_clear_scanline_wait(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_ring_buffer *ring;
	u32 tmp;

	if (IS_GEN2(dev))
		/* Can't break the hang on i8xx */
		return;

	ring = LP_RING(dev_priv);
	tmp = I915_READ_CTL(ring);
	if (tmp & RING_WAIT)
		I915_WRITE_CTL(ring, tmp);
}

static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
{
	struct drm_i915_gem_object *obj;
	struct drm_i915_private *dev_priv;

	if (crtc->fb == NULL)
		return;

	obj = to_intel_framebuffer(crtc->fb)->obj;
	dev_priv = crtc->dev->dev_private;
//	wait_event(dev_priv->pending_flip_queue,
//		   atomic_read(&obj->pending_flip) == 0);
}

static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	struct drm_mode_config *mode_config = &dev->mode_config;
	struct intel_encoder *encoder;

	/*
	 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
	 * must be driven by its own crtc; no sharing is possible.
	 */
	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
		if (encoder->base.crtc != crtc)
			continue;

		switch (encoder->type) {
		case INTEL_OUTPUT_EDP:
			if (!intel_encoder_is_pch_edp(&encoder->base))
				return false;
			continue;
		}
	}

	return true;
}

/*
 * Enable PCH resources required for PCH ports:
 *   - PCH PLLs
 *   - FDI training & RX/TX
 *   - update transcoder timings
 *   - DP transcoding bits
 *   - transcoder
 */
static void ironlake_pch_enable(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int pipe = intel_crtc->pipe;
	u32 reg, temp, transc_sel;

	/* For PCH output, training FDI link */
	dev_priv->display.fdi_link_train(crtc);

	intel_enable_pch_pll(dev_priv, pipe);

	if (HAS_PCH_CPT(dev)) {
		transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL :
			TRANSC_DPLLB_SEL;

		/* Be sure PCH DPLL SEL is set */
		temp = I915_READ(PCH_DPLL_SEL);
		if (pipe == 0) {
			temp &= ~(TRANSA_DPLLB_SEL);
			temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
		} else if (pipe == 1) {
			temp &= ~(TRANSB_DPLLB_SEL);
			temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
		} else if (pipe == 2) {
			temp &= ~(TRANSC_DPLLB_SEL);
			temp |= (TRANSC_DPLL_ENABLE | transc_sel);
		}
		I915_WRITE(PCH_DPLL_SEL, temp);
	}

	/* set transcoder timing, panel must allow it */
	assert_panel_unlocked(dev_priv, pipe);
	I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
	I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
	I915_WRITE(TRANS_HSYNC(pipe),  I915_READ(HSYNC(pipe)));

	I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
	I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
	I915_WRITE(TRANS_VSYNC(pipe),  I915_READ(VSYNC(pipe)));

	intel_fdi_normal_train(crtc);

	/* For PCH DP, enable TRANS_DP_CTL */
	if (HAS_PCH_CPT(dev) &&
	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
	     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
		reg = TRANS_DP_CTL(pipe);
		temp = I915_READ(reg);
		temp &= ~(TRANS_DP_PORT_SEL_MASK |
			  TRANS_DP_SYNC_MASK |
			  TRANS_DP_BPC_MASK);
		temp |= (TRANS_DP_OUTPUT_ENABLE |
			 TRANS_DP_ENH_FRAMING);
		temp |= bpc << 9; /* same format but at 11:9 */

		if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
			temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
		if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;

		switch (intel_trans_dp_port_sel(crtc)) {
		case PCH_DP_B:
			temp |= TRANS_DP_PORT_SEL_B;
			break;
		case PCH_DP_C:
			temp |= TRANS_DP_PORT_SEL_C;
			break;
		case PCH_DP_D:
			temp |= TRANS_DP_PORT_SEL_D;
			break;
		default:
			DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
			temp |= TRANS_DP_PORT_SEL_B;
			break;
		}

		I915_WRITE(reg, temp);
	}

	intel_enable_transcoder(dev_priv, pipe);
}

void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
	u32 temp;

	temp = I915_READ(dslreg);
	udelay(500);
	if (wait_for(I915_READ(dslreg) != temp, 5)) {
		/* Without this, mode sets may fail silently on FDI */
		I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
		udelay(250);
		I915_WRITE(tc2reg, 0);
		if (wait_for(I915_READ(dslreg) != temp, 5))
			DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
	}
}

static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    int plane = intel_crtc->plane;
    u32 temp;
    bool is_pch_port;

    if (intel_crtc->active)
        return;

    intel_crtc->active = true;
    intel_update_watermarks(dev);

    if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
        temp = I915_READ(PCH_LVDS);
        if ((temp & LVDS_PORT_EN) == 0)
            I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
    }

    is_pch_port = intel_crtc_driving_pch(crtc);

    if (is_pch_port)
        ironlake_fdi_pll_enable(crtc);
    else
        ironlake_fdi_disable(crtc);

    /* Enable panel fitting for LVDS */
    if (dev_priv->pch_pf_size &&
        (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) {
        /* Force use of hard-coded filter coefficients
         * as some pre-programmed values are broken,
         * e.g. x201.
         */
        I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
        I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
        I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
    }

    /*
     * On ILK+ LUT must be loaded before the pipe is running but with
     * clocks enabled
     */
    intel_crtc_load_lut(crtc);

    intel_enable_pipe(dev_priv, pipe, is_pch_port);
    intel_enable_plane(dev_priv, plane, pipe);

    if (is_pch_port)
        ironlake_pch_enable(crtc);

    mutex_lock(&dev->struct_mutex);
    intel_update_fbc(dev);
    mutex_unlock(&dev->struct_mutex);

//    intel_crtc_update_cursor(crtc, true);
}

static void ironlake_crtc_disable(struct drm_crtc *crtc)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    int plane = intel_crtc->plane;
    u32 reg, temp;

    if (!intel_crtc->active)
        return;

    ENTER();

    intel_crtc_wait_for_pending_flips(crtc);
//    drm_vblank_off(dev, pipe);
//    intel_crtc_update_cursor(crtc, false);

    intel_disable_plane(dev_priv, plane, pipe);

    if (dev_priv->cfb_plane == plane)
        intel_disable_fbc(dev);

    intel_disable_pipe(dev_priv, pipe);

    /* Disable PF */
    I915_WRITE(PF_CTL(pipe), 0);
    I915_WRITE(PF_WIN_SZ(pipe), 0);

    ironlake_fdi_disable(crtc);

    /* This is a horrible layering violation; we should be doing this in
     * the connector/encoder ->prepare instead, but we don't always have
     * enough information there about the config to know whether it will
     * actually be necessary or just cause undesired flicker.
     */
    intel_disable_pch_ports(dev_priv, pipe);

    intel_disable_transcoder(dev_priv, pipe);

    if (HAS_PCH_CPT(dev)) {
        /* disable TRANS_DP_CTL */
        reg = TRANS_DP_CTL(pipe);
        temp = I915_READ(reg);
        temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
        temp |= TRANS_DP_PORT_SEL_NONE;
        I915_WRITE(reg, temp);

        /* disable DPLL_SEL */
        temp = I915_READ(PCH_DPLL_SEL);
        switch (pipe) {
        case 0:
			temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
            break;
        case 1:
            temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
            break;
        case 2:
			/* C shares PLL A or B */
            temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
            break;
        default:
            BUG(); /* wtf */
        }
        I915_WRITE(PCH_DPLL_SEL, temp);
    }

    /* disable PCH DPLL */
	if (!intel_crtc->no_pll)
    	intel_disable_pch_pll(dev_priv, pipe);

    /* Switch from PCDclk to Rawclk */
    reg = FDI_RX_CTL(pipe);
    temp = I915_READ(reg);
    I915_WRITE(reg, temp & ~FDI_PCDCLK);

    /* Disable CPU FDI TX PLL */
    reg = FDI_TX_CTL(pipe);
    temp = I915_READ(reg);
    I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);

    POSTING_READ(reg);
    udelay(100);

    reg = FDI_RX_CTL(pipe);
    temp = I915_READ(reg);
    I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);

    /* Wait for the clocks to turn off. */
    POSTING_READ(reg);
    udelay(100);

    intel_crtc->active = false;
    intel_update_watermarks(dev);

    mutex_lock(&dev->struct_mutex);
    intel_update_fbc(dev);
    intel_clear_scanline_wait(dev);
    mutex_unlock(&dev->struct_mutex);

    LEAVE();

}

static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
{
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    int plane = intel_crtc->plane;

    /* XXX: When our outputs are all unaware of DPMS modes other than off
     * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
     */
    switch (mode) {
    case DRM_MODE_DPMS_ON:
    case DRM_MODE_DPMS_STANDBY:
    case DRM_MODE_DPMS_SUSPEND:
        DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
        ironlake_crtc_enable(crtc);
        break;

    case DRM_MODE_DPMS_OFF:
        DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
        ironlake_crtc_disable(crtc);
        break;
    }
}

static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
{
	if (!enable && intel_crtc->overlay) {
		struct drm_device *dev = intel_crtc->base.dev;
		struct drm_i915_private *dev_priv = dev->dev_private;

		mutex_lock(&dev->struct_mutex);
		dev_priv->mm.interruptible = false;
//       (void) intel_overlay_switch_off(intel_crtc->overlay);
		dev_priv->mm.interruptible = true;
		mutex_unlock(&dev->struct_mutex);
	}

	/* Let userspace switch the overlay on again. In most cases userspace
	 * has to recompute where to put it anyway.
	 */
}

static void i9xx_crtc_enable(struct drm_crtc *crtc)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    int plane = intel_crtc->plane;

    if (intel_crtc->active)
        return;

    intel_crtc->active = true;
    intel_update_watermarks(dev);

    intel_enable_pll(dev_priv, pipe);
    intel_enable_pipe(dev_priv, pipe, false);
    intel_enable_plane(dev_priv, plane, pipe);

    intel_crtc_load_lut(crtc);
    intel_update_fbc(dev);

    /* Give the overlay scaler a chance to enable if it's on this pipe */
    intel_crtc_dpms_overlay(intel_crtc, true);
//    intel_crtc_update_cursor(crtc, true);
}

static void i9xx_crtc_disable(struct drm_crtc *crtc)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    int plane = intel_crtc->plane;

    if (!intel_crtc->active)
        return;

    /* Give the overlay scaler a chance to disable if it's on this pipe */
    intel_crtc_wait_for_pending_flips(crtc);
//    drm_vblank_off(dev, pipe);
    intel_crtc_dpms_overlay(intel_crtc, false);
//    intel_crtc_update_cursor(crtc, false);

    if (dev_priv->cfb_plane == plane)
        intel_disable_fbc(dev);

    intel_disable_plane(dev_priv, plane, pipe);
    intel_disable_pipe(dev_priv, pipe);
    intel_disable_pll(dev_priv, pipe);

    intel_crtc->active = false;
    intel_update_fbc(dev);
    intel_update_watermarks(dev);
    intel_clear_scanline_wait(dev);
}

static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
{
    /* XXX: When our outputs are all unaware of DPMS modes other than off
     * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
     */
    switch (mode) {
    case DRM_MODE_DPMS_ON:
    case DRM_MODE_DPMS_STANDBY:
    case DRM_MODE_DPMS_SUSPEND:
        i9xx_crtc_enable(crtc);
        break;
    case DRM_MODE_DPMS_OFF:
        i9xx_crtc_disable(crtc);
        break;
    }
}

/**
 * Sets the power management mode of the pipe and plane.
 */
static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct drm_i915_master_private *master_priv;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int pipe = intel_crtc->pipe;
	bool enabled;

	if (intel_crtc->dpms_mode == mode)
		return;

	intel_crtc->dpms_mode = mode;

	dev_priv->display.dpms(crtc, mode);

#if 0
	if (!dev->primary->master)
		return;

	master_priv = dev->primary->master->driver_priv;
	if (!master_priv->sarea_priv)
		return;

	enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;

	switch (pipe) {
	case 0:
		master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
		master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
		break;
	case 1:
		master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
		master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
		break;
	default:
		DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
		break;
	}
#endif

}

static void intel_crtc_disable(struct drm_crtc *crtc)
{
	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
	struct drm_device *dev = crtc->dev;

	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);

	if (crtc->fb) {
		mutex_lock(&dev->struct_mutex);
		i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
		mutex_unlock(&dev->struct_mutex);
	}
}

/* Prepare for a mode set.
 *
 * Note we could be a lot smarter here.  We need to figure out which outputs
 * will be enabled, which disabled (in short, how the config will changes)
 * and perform the minimum necessary steps to accomplish that, e.g. updating
 * watermarks, FBC configuration, making sure PLLs are programmed correctly,
 * panel fitting is in the proper state, etc.
 */
static void i9xx_crtc_prepare(struct drm_crtc *crtc)
{
	i9xx_crtc_disable(crtc);
}

static void i9xx_crtc_commit(struct drm_crtc *crtc)
{
	i9xx_crtc_enable(crtc);
}

static void ironlake_crtc_prepare(struct drm_crtc *crtc)
{
	ironlake_crtc_disable(crtc);
}

static void ironlake_crtc_commit(struct drm_crtc *crtc)
{
	ironlake_crtc_enable(crtc);
}

void intel_encoder_prepare(struct drm_encoder *encoder)
{
	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
	/* lvds has its own version of prepare see intel_lvds_prepare */
	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
}

void intel_encoder_commit(struct drm_encoder *encoder)
{
	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
	struct drm_device *dev = encoder->dev;
	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
	struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);

	/* lvds has its own version of commit see intel_lvds_commit */
	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);

	if (HAS_PCH_CPT(dev))
		intel_cpt_verify_modeset(dev, intel_crtc->pipe);
}

void intel_encoder_destroy(struct drm_encoder *encoder)
{
	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);

	drm_encoder_cleanup(encoder);
	kfree(intel_encoder);
}

static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
				  struct drm_display_mode *mode,
				  struct drm_display_mode *adjusted_mode)
{
	struct drm_device *dev = crtc->dev;

	if (HAS_PCH_SPLIT(dev)) {
		/* FDI link clock is fixed at 2.7G */
		if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
			return false;
	}

	/* XXX some encoders set the crtcinfo, others don't.
	 * Obviously we need some form of conflict resolution here...
	 */
	if (adjusted_mode->crtc_htotal == 0)
		drm_mode_set_crtcinfo(adjusted_mode, 0);

	return true;
}

static int i945_get_display_clock_speed(struct drm_device *dev)
{
	return 400000;
}

static int i915_get_display_clock_speed(struct drm_device *dev)
{
	return 333000;
}

static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
{
	return 200000;
}

static int i915gm_get_display_clock_speed(struct drm_device *dev)
{
	u16 gcfgc = 0;

	pci_read_config_word(dev->pdev, GCFGC, &gcfgc);

	if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
		return 133000;
	else {
		switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
		case GC_DISPLAY_CLOCK_333_MHZ:
			return 333000;
		default:
		case GC_DISPLAY_CLOCK_190_200_MHZ:
			return 190000;
		}
	}
}

static int i865_get_display_clock_speed(struct drm_device *dev)
{
	return 266000;
}

static int i855_get_display_clock_speed(struct drm_device *dev)
{
	u16 hpllcc = 0;
	/* Assume that the hardware is in the high speed state.  This
	 * should be the default.
	 */
	switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
	case GC_CLOCK_133_200:
	case GC_CLOCK_100_200:
		return 200000;
	case GC_CLOCK_166_250:
		return 250000;
	case GC_CLOCK_100_133:
		return 133000;
	}

	/* Shouldn't happen */
	return 0;
}

static int i830_get_display_clock_speed(struct drm_device *dev)
{
	return 133000;
}

struct fdi_m_n {
    u32        tu;
    u32        gmch_m;
    u32        gmch_n;
    u32        link_m;
    u32        link_n;
};

static void
fdi_reduce_ratio(u32 *num, u32 *den)
{
	while (*num > 0xffffff || *den > 0xffffff) {
		*num >>= 1;
		*den >>= 1;
	}
}

static void
ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
		     int link_clock, struct fdi_m_n *m_n)
{
	m_n->tu = 64; /* default size */

	/* BUG_ON(pixel_clock > INT_MAX / 36); */
	m_n->gmch_m = bits_per_pixel * pixel_clock;
	m_n->gmch_n = link_clock * nlanes * 8;
	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);

	m_n->link_m = pixel_clock;
	m_n->link_n = link_clock;
	fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
}


struct intel_watermark_params {
    unsigned long fifo_size;
    unsigned long max_wm;
    unsigned long default_wm;
    unsigned long guard_size;
    unsigned long cacheline_size;
};

/* Pineview has different values for various configs */
static const struct intel_watermark_params pineview_display_wm = {
    PINEVIEW_DISPLAY_FIFO,
    PINEVIEW_MAX_WM,
    PINEVIEW_DFT_WM,
    PINEVIEW_GUARD_WM,
    PINEVIEW_FIFO_LINE_SIZE
};
static const struct intel_watermark_params pineview_display_hplloff_wm = {
    PINEVIEW_DISPLAY_FIFO,
    PINEVIEW_MAX_WM,
    PINEVIEW_DFT_HPLLOFF_WM,
    PINEVIEW_GUARD_WM,
    PINEVIEW_FIFO_LINE_SIZE
};
static const struct intel_watermark_params pineview_cursor_wm = {
    PINEVIEW_CURSOR_FIFO,
    PINEVIEW_CURSOR_MAX_WM,
    PINEVIEW_CURSOR_DFT_WM,
    PINEVIEW_CURSOR_GUARD_WM,
    PINEVIEW_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params pineview_cursor_hplloff_wm = {
    PINEVIEW_CURSOR_FIFO,
    PINEVIEW_CURSOR_MAX_WM,
    PINEVIEW_CURSOR_DFT_WM,
    PINEVIEW_CURSOR_GUARD_WM,
    PINEVIEW_FIFO_LINE_SIZE
};
static const struct intel_watermark_params g4x_wm_info = {
    G4X_FIFO_SIZE,
    G4X_MAX_WM,
    G4X_MAX_WM,
    2,
    G4X_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params g4x_cursor_wm_info = {
    I965_CURSOR_FIFO,
    I965_CURSOR_MAX_WM,
    I965_CURSOR_DFT_WM,
    2,
    G4X_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i965_cursor_wm_info = {
    I965_CURSOR_FIFO,
    I965_CURSOR_MAX_WM,
    I965_CURSOR_DFT_WM,
    2,
    I915_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i945_wm_info = {
    I945_FIFO_SIZE,
    I915_MAX_WM,
    1,
    2,
    I915_FIFO_LINE_SIZE
};
static const struct intel_watermark_params i915_wm_info = {
    I915_FIFO_SIZE,
    I915_MAX_WM,
    1,
    2,
    I915_FIFO_LINE_SIZE
};
static const struct intel_watermark_params i855_wm_info = {
    I855GM_FIFO_SIZE,
    I915_MAX_WM,
    1,
    2,
    I830_FIFO_LINE_SIZE
};
static const struct intel_watermark_params i830_wm_info = {
    I830_FIFO_SIZE,
    I915_MAX_WM,
    1,
    2,
    I830_FIFO_LINE_SIZE
};

static const struct intel_watermark_params ironlake_display_wm_info = {
    ILK_DISPLAY_FIFO,
    ILK_DISPLAY_MAXWM,
    ILK_DISPLAY_DFTWM,
    2,
    ILK_FIFO_LINE_SIZE
};
static const struct intel_watermark_params ironlake_cursor_wm_info = {
    ILK_CURSOR_FIFO,
    ILK_CURSOR_MAXWM,
    ILK_CURSOR_DFTWM,
    2,
    ILK_FIFO_LINE_SIZE
};
static const struct intel_watermark_params ironlake_display_srwm_info = {
    ILK_DISPLAY_SR_FIFO,
    ILK_DISPLAY_MAX_SRWM,
    ILK_DISPLAY_DFT_SRWM,
    2,
    ILK_FIFO_LINE_SIZE
};
static const struct intel_watermark_params ironlake_cursor_srwm_info = {
    ILK_CURSOR_SR_FIFO,
    ILK_CURSOR_MAX_SRWM,
    ILK_CURSOR_DFT_SRWM,
    2,
    ILK_FIFO_LINE_SIZE
};

static const struct intel_watermark_params sandybridge_display_wm_info = {
    SNB_DISPLAY_FIFO,
    SNB_DISPLAY_MAXWM,
    SNB_DISPLAY_DFTWM,
    2,
    SNB_FIFO_LINE_SIZE
};
static const struct intel_watermark_params sandybridge_cursor_wm_info = {
    SNB_CURSOR_FIFO,
    SNB_CURSOR_MAXWM,
    SNB_CURSOR_DFTWM,
    2,
    SNB_FIFO_LINE_SIZE
};
static const struct intel_watermark_params sandybridge_display_srwm_info = {
    SNB_DISPLAY_SR_FIFO,
    SNB_DISPLAY_MAX_SRWM,
    SNB_DISPLAY_DFT_SRWM,
    2,
    SNB_FIFO_LINE_SIZE
};
static const struct intel_watermark_params sandybridge_cursor_srwm_info = {
    SNB_CURSOR_SR_FIFO,
    SNB_CURSOR_MAX_SRWM,
    SNB_CURSOR_DFT_SRWM,
    2,
    SNB_FIFO_LINE_SIZE
};


/**
 * intel_calculate_wm - calculate watermark level
 * @clock_in_khz: pixel clock
 * @wm: chip FIFO params
 * @pixel_size: display pixel size
 * @latency_ns: memory latency for the platform
 *
 * Calculate the watermark level (the level at which the display plane will
 * start fetching from memory again).  Each chip has a different display
 * FIFO size and allocation, so the caller needs to figure that out and pass
 * in the correct intel_watermark_params structure.
 *
 * As the pixel clock runs, the FIFO will be drained at a rate that depends
 * on the pixel size.  When it reaches the watermark level, it'll start
 * fetching FIFO line sized based chunks from memory until the FIFO fills
 * past the watermark point.  If the FIFO drains completely, a FIFO underrun
 * will occur, and a display engine hang could result.
 */
static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
                    const struct intel_watermark_params *wm,
                    int fifo_size,
                    int pixel_size,
                    unsigned long latency_ns)
{
    long entries_required, wm_size;

    /*
     * Note: we need to make sure we don't overflow for various clock &
     * latency values.
     * clocks go from a few thousand to several hundred thousand.
     * latency is usually a few thousand
     */
    entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
        1000;
    entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size);

    DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required);

    wm_size = fifo_size - (entries_required + wm->guard_size);

    DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size);

    /* Don't promote wm_size to unsigned... */
    if (wm_size > (long)wm->max_wm)
        wm_size = wm->max_wm;
    if (wm_size <= 0)
        wm_size = wm->default_wm;
    return wm_size;
}

struct cxsr_latency {
    int is_desktop;
    int is_ddr3;
    unsigned long fsb_freq;
    unsigned long mem_freq;
    unsigned long display_sr;
    unsigned long display_hpll_disable;
    unsigned long cursor_sr;
    unsigned long cursor_hpll_disable;
};

static const struct cxsr_latency cxsr_latency_table[] = {
    {1, 0, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
    {1, 0, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
    {1, 0, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
    {1, 1, 800, 667, 6420, 36420, 6873, 36873},    /* DDR3-667 SC */
    {1, 1, 800, 800, 5902, 35902, 6318, 36318},    /* DDR3-800 SC */

    {1, 0, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
    {1, 0, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
    {1, 0, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
    {1, 1, 667, 667, 6438, 36438, 6911, 36911},    /* DDR3-667 SC */
    {1, 1, 667, 800, 5941, 35941, 6377, 36377},    /* DDR3-800 SC */

    {1, 0, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
    {1, 0, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
    {1, 0, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
    {1, 1, 400, 667, 6509, 36509, 7062, 37062},    /* DDR3-667 SC */
    {1, 1, 400, 800, 5985, 35985, 6501, 36501},    /* DDR3-800 SC */

    {0, 0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
    {0, 0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
    {0, 0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
    {0, 1, 800, 667, 6476, 36476, 6955, 36955},    /* DDR3-667 SC */
    {0, 1, 800, 800, 5958, 35958, 6400, 36400},    /* DDR3-800 SC */

    {0, 0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
    {0, 0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
    {0, 0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
    {0, 1, 667, 667, 6494, 36494, 6993, 36993},    /* DDR3-667 SC */
    {0, 1, 667, 800, 5998, 35998, 6460, 36460},    /* DDR3-800 SC */

    {0, 0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
    {0, 0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
    {0, 0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
    {0, 1, 400, 667, 6566, 36566, 7145, 37145},    /* DDR3-667 SC */
    {0, 1, 400, 800, 6042, 36042, 6584, 36584},    /* DDR3-800 SC */
};

static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
                             int is_ddr3,
                             int fsb,
                             int mem)
{
    const struct cxsr_latency *latency;
    int i;

    if (fsb == 0 || mem == 0)
        return NULL;

    for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
        latency = &cxsr_latency_table[i];
        if (is_desktop == latency->is_desktop &&
            is_ddr3 == latency->is_ddr3 &&
            fsb == latency->fsb_freq && mem == latency->mem_freq)
            return latency;
    }

    DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");

    return NULL;
}

static void pineview_disable_cxsr(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;

    /* deactivate cxsr */
    I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN);
}

/*
 * Latency for FIFO fetches is dependent on several factors:
 *   - memory configuration (speed, channels)
 *   - chipset
 *   - current MCH state
 * It can be fairly high in some situations, so here we assume a fairly
 * pessimal value.  It's a tradeoff between extra memory fetches (if we
 * set this value too high, the FIFO will fetch frequently to stay full)
 * and power consumption (set it too low to save power and we might see
 * FIFO underruns and display "flicker").
 *
 * A value of 5us seems to be a good balance; safe for very low end
 * platforms but not overly aggressive on lower latency configs.
 */
static const int latency_ns = 5000;

static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	uint32_t dsparb = I915_READ(DSPARB);
	int size;

	size = dsparb & 0x7f;
	if (plane)
		size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;

	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
		      plane ? "B" : "A", size);

	return size;
}

static int i85x_get_fifo_size(struct drm_device *dev, int plane)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	uint32_t dsparb = I915_READ(DSPARB);
	int size;

	size = dsparb & 0x1ff;
	if (plane)
		size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
	size >>= 1; /* Convert to cachelines */

	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
		      plane ? "B" : "A", size);

	return size;
}

static int i845_get_fifo_size(struct drm_device *dev, int plane)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	uint32_t dsparb = I915_READ(DSPARB);
	int size;

	size = dsparb & 0x7f;
	size >>= 2; /* Convert to cachelines */

	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
		      plane ? "B" : "A",
		      size);

	return size;
}

static int i830_get_fifo_size(struct drm_device *dev, int plane)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	uint32_t dsparb = I915_READ(DSPARB);
	int size;

	size = dsparb & 0x7f;
	size >>= 1; /* Convert to cachelines */

	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
		      plane ? "B" : "A", size);

	return size;
}

static struct drm_crtc *single_enabled_crtc(struct drm_device *dev)
{
    struct drm_crtc *crtc, *enabled = NULL;

    list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
        if (crtc->enabled && crtc->fb) {
            if (enabled)
                return NULL;
            enabled = crtc;
        }
    }

    return enabled;
}

static void pineview_update_wm(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct drm_crtc *crtc;
	const struct cxsr_latency *latency;
	u32 reg;
	unsigned long wm;

	latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
					 dev_priv->fsb_freq, dev_priv->mem_freq);
	if (!latency) {
		DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
		pineview_disable_cxsr(dev);
		return;
	}

	crtc = single_enabled_crtc(dev);
	if (crtc) {
		int clock = crtc->mode.clock;
		int pixel_size = crtc->fb->bits_per_pixel / 8;

		/* Display SR */
		wm = intel_calculate_wm(clock, &pineview_display_wm,
					pineview_display_wm.fifo_size,
					pixel_size, latency->display_sr);
		reg = I915_READ(DSPFW1);
		reg &= ~DSPFW_SR_MASK;
		reg |= wm << DSPFW_SR_SHIFT;
		I915_WRITE(DSPFW1, reg);
		DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);

		/* cursor SR */
		wm = intel_calculate_wm(clock, &pineview_cursor_wm,
					pineview_display_wm.fifo_size,
					pixel_size, latency->cursor_sr);
		reg = I915_READ(DSPFW3);
		reg &= ~DSPFW_CURSOR_SR_MASK;
		reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
		I915_WRITE(DSPFW3, reg);

		/* Display HPLL off SR */
		wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm,
					pineview_display_hplloff_wm.fifo_size,
					pixel_size, latency->display_hpll_disable);
		reg = I915_READ(DSPFW3);
		reg &= ~DSPFW_HPLL_SR_MASK;
		reg |= wm & DSPFW_HPLL_SR_MASK;
		I915_WRITE(DSPFW3, reg);

		/* cursor HPLL off SR */
		wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm,
					pineview_display_hplloff_wm.fifo_size,
					pixel_size, latency->cursor_hpll_disable);
		reg = I915_READ(DSPFW3);
		reg &= ~DSPFW_HPLL_CURSOR_MASK;
		reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
		I915_WRITE(DSPFW3, reg);
		DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);

		/* activate cxsr */
		I915_WRITE(DSPFW3,
			   I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN);
		DRM_DEBUG_KMS("Self-refresh is enabled\n");
	} else {
		pineview_disable_cxsr(dev);
		DRM_DEBUG_KMS("Self-refresh is disabled\n");
	}
}

static bool g4x_compute_wm0(struct drm_device *dev,
                int plane,
                const struct intel_watermark_params *display,
                int display_latency_ns,
                const struct intel_watermark_params *cursor,
                int cursor_latency_ns,
                int *plane_wm,
                int *cursor_wm)
{
    struct drm_crtc *crtc;
    int htotal, hdisplay, clock, pixel_size;
    int line_time_us, line_count;
    int entries, tlb_miss;

    crtc = intel_get_crtc_for_plane(dev, plane);
    if (crtc->fb == NULL || !crtc->enabled) {
        *cursor_wm = cursor->guard_size;
        *plane_wm = display->guard_size;
        return false;
    }

    htotal = crtc->mode.htotal;
    hdisplay = crtc->mode.hdisplay;
    clock = crtc->mode.clock;
    pixel_size = crtc->fb->bits_per_pixel / 8;

    /* Use the small buffer method to calculate plane watermark */
    entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
    tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
    if (tlb_miss > 0)
        entries += tlb_miss;
    entries = DIV_ROUND_UP(entries, display->cacheline_size);
    *plane_wm = entries + display->guard_size;
    if (*plane_wm > (int)display->max_wm)
        *plane_wm = display->max_wm;

    /* Use the large buffer method to calculate cursor watermark */
    line_time_us = ((htotal * 1000) / clock);
    line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
    entries = line_count * 64 * pixel_size;
    tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
    if (tlb_miss > 0)
        entries += tlb_miss;
    entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
    *cursor_wm = entries + cursor->guard_size;
    if (*cursor_wm > (int)cursor->max_wm)
        *cursor_wm = (int)cursor->max_wm;

    return true;
}

/*
 * Check the wm result.
 *
 * If any calculated watermark values is larger than the maximum value that
 * can be programmed into the associated watermark register, that watermark
 * must be disabled.
 */
static bool g4x_check_srwm(struct drm_device *dev,
			   int display_wm, int cursor_wm,
			   const struct intel_watermark_params *display,
			   const struct intel_watermark_params *cursor)
{
	DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n",
		      display_wm, cursor_wm);

	if (display_wm > display->max_wm) {
		DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n",
			      display_wm, display->max_wm);
		return false;
	}

	if (cursor_wm > cursor->max_wm) {
		DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n",
			      cursor_wm, cursor->max_wm);
		return false;
	}

	if (!(display_wm || cursor_wm)) {
		DRM_DEBUG_KMS("SR latency is 0, disabling\n");
		return false;
	}

	return true;
}

static bool g4x_compute_srwm(struct drm_device *dev,
			     int plane,
			     int latency_ns,
			     const struct intel_watermark_params *display,
			     const struct intel_watermark_params *cursor,
			     int *display_wm, int *cursor_wm)
{
	struct drm_crtc *crtc;
	int hdisplay, htotal, pixel_size, clock;
	unsigned long line_time_us;
	int line_count, line_size;
	int small, large;
	int entries;

	if (!latency_ns) {
		*display_wm = *cursor_wm = 0;
		return false;
	}

	crtc = intel_get_crtc_for_plane(dev, plane);
	hdisplay = crtc->mode.hdisplay;
	htotal = crtc->mode.htotal;
	clock = crtc->mode.clock;
	pixel_size = crtc->fb->bits_per_pixel / 8;

	line_time_us = (htotal * 1000) / clock;
	line_count = (latency_ns / line_time_us + 1000) / 1000;
	line_size = hdisplay * pixel_size;

	/* Use the minimum of the small and large buffer method for primary */
	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
	large = line_count * line_size;

	entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
	*display_wm = entries + display->guard_size;

	/* calculate the self-refresh watermark for display cursor */
	entries = line_count * pixel_size * 64;
	entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
	*cursor_wm = entries + cursor->guard_size;

	return g4x_check_srwm(dev,
			      *display_wm, *cursor_wm,
			      display, cursor);
}

#define single_plane_enabled(mask) is_power_of_2(mask)

static void g4x_update_wm(struct drm_device *dev)
{
	static const int sr_latency_ns = 12000;
	struct drm_i915_private *dev_priv = dev->dev_private;
	int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
	int plane_sr, cursor_sr;
	unsigned int enabled = 0;

	if (g4x_compute_wm0(dev, 0,
			    &g4x_wm_info, latency_ns,
			    &g4x_cursor_wm_info, latency_ns,
			    &planea_wm, &cursora_wm))
		enabled |= 1;

	if (g4x_compute_wm0(dev, 1,
			    &g4x_wm_info, latency_ns,
			    &g4x_cursor_wm_info, latency_ns,
			    &planeb_wm, &cursorb_wm))
		enabled |= 2;

	plane_sr = cursor_sr = 0;
	if (single_plane_enabled(enabled) &&
	    g4x_compute_srwm(dev, ffs(enabled) - 1,
			     sr_latency_ns,
			     &g4x_wm_info,
			     &g4x_cursor_wm_info,
			     &plane_sr, &cursor_sr))
		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
	else
		I915_WRITE(FW_BLC_SELF,
			   I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN);

	DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
		      planea_wm, cursora_wm,
		      planeb_wm, cursorb_wm,
		      plane_sr, cursor_sr);

	I915_WRITE(DSPFW1,
		   (plane_sr << DSPFW_SR_SHIFT) |
		   (cursorb_wm << DSPFW_CURSORB_SHIFT) |
		   (planeb_wm << DSPFW_PLANEB_SHIFT) |
		   planea_wm);
	I915_WRITE(DSPFW2,
		   (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
		   (cursora_wm << DSPFW_CURSORA_SHIFT));
	/* HPLL off in SR has some issues on G4x... disable it */
	I915_WRITE(DSPFW3,
		   (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
		   (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
}

static void i965_update_wm(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct drm_crtc *crtc;
	int srwm = 1;
	int cursor_sr = 16;

	/* Calc sr entries for one plane configs */
	crtc = single_enabled_crtc(dev);
	if (crtc) {
		/* self-refresh has much higher latency */
		static const int sr_latency_ns = 12000;
		int clock = crtc->mode.clock;
		int htotal = crtc->mode.htotal;
		int hdisplay = crtc->mode.hdisplay;
		int pixel_size = crtc->fb->bits_per_pixel / 8;
		unsigned long line_time_us;
		int entries;

		line_time_us = ((htotal * 1000) / clock);

		/* Use ns/us then divide to preserve precision */
		entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
			pixel_size * hdisplay;
		entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE);
		srwm = I965_FIFO_SIZE - entries;
		if (srwm < 0)
			srwm = 1;
		srwm &= 0x1ff;
		DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n",
			      entries, srwm);

		entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
			pixel_size * 64;
		entries = DIV_ROUND_UP(entries,
					  i965_cursor_wm_info.cacheline_size);
		cursor_sr = i965_cursor_wm_info.fifo_size -
			(entries + i965_cursor_wm_info.guard_size);

		if (cursor_sr > i965_cursor_wm_info.max_wm)
			cursor_sr = i965_cursor_wm_info.max_wm;

		DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
			      "cursor %d\n", srwm, cursor_sr);

		if (IS_CRESTLINE(dev))
			I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
	} else {
		/* Turn off self refresh if both pipes are enabled */
		if (IS_CRESTLINE(dev))
			I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
				   & ~FW_BLC_SELF_EN);
	}

	DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
		      srwm);

	/* 965 has limitations... */
	I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) |
		   (8 << 16) | (8 << 8) | (8 << 0));
	I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
	/* update cursor SR watermark */
	I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
}

static void i9xx_update_wm(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	const struct intel_watermark_params *wm_info;
	uint32_t fwater_lo;
	uint32_t fwater_hi;
	int cwm, srwm = 1;
	int fifo_size;
	int planea_wm, planeb_wm;
	struct drm_crtc *crtc, *enabled = NULL;

	if (IS_I945GM(dev))
		wm_info = &i945_wm_info;
	else if (!IS_GEN2(dev))
		wm_info = &i915_wm_info;
	else
		wm_info = &i855_wm_info;

	fifo_size = dev_priv->display.get_fifo_size(dev, 0);
	crtc = intel_get_crtc_for_plane(dev, 0);
	if (crtc->enabled && crtc->fb) {
		planea_wm = intel_calculate_wm(crtc->mode.clock,
					       wm_info, fifo_size,
					       crtc->fb->bits_per_pixel / 8,
					       latency_ns);
		enabled = crtc;
	} else
		planea_wm = fifo_size - wm_info->guard_size;

	fifo_size = dev_priv->display.get_fifo_size(dev, 1);
	crtc = intel_get_crtc_for_plane(dev, 1);
	if (crtc->enabled && crtc->fb) {
		planeb_wm = intel_calculate_wm(crtc->mode.clock,
					       wm_info, fifo_size,
					       crtc->fb->bits_per_pixel / 8,
					       latency_ns);
		if (enabled == NULL)
			enabled = crtc;
		else
			enabled = NULL;
	} else
		planeb_wm = fifo_size - wm_info->guard_size;

	DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);

	/*
	 * Overlay gets an aggressive default since video jitter is bad.
	 */
	cwm = 2;

	/* Play safe and disable self-refresh before adjusting watermarks. */
	if (IS_I945G(dev) || IS_I945GM(dev))
		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0);
	else if (IS_I915GM(dev))
		I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);

	/* Calc sr entries for one plane configs */
	if (HAS_FW_BLC(dev) && enabled) {
		/* self-refresh has much higher latency */
		static const int sr_latency_ns = 6000;
		int clock = enabled->mode.clock;
		int htotal = enabled->mode.htotal;
		int hdisplay = enabled->mode.hdisplay;
		int pixel_size = enabled->fb->bits_per_pixel / 8;
		unsigned long line_time_us;
		int entries;

		line_time_us = (htotal * 1000) / clock;

		/* Use ns/us then divide to preserve precision */
		entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
			pixel_size * hdisplay;
		entries = DIV_ROUND_UP(entries, wm_info->cacheline_size);
		DRM_DEBUG_KMS("self-refresh entries: %d\n", entries);
		srwm = wm_info->fifo_size - entries;
		if (srwm < 0)
			srwm = 1;

		if (IS_I945G(dev) || IS_I945GM(dev))
			I915_WRITE(FW_BLC_SELF,
				   FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
		else if (IS_I915GM(dev))
			I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
	}

	DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
		      planea_wm, planeb_wm, cwm, srwm);

	fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
	fwater_hi = (cwm & 0x1f);

	/* Set request length to 8 cachelines per fetch */
	fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
	fwater_hi = fwater_hi | (1 << 8);

	I915_WRITE(FW_BLC, fwater_lo);
	I915_WRITE(FW_BLC2, fwater_hi);

	if (HAS_FW_BLC(dev)) {
		if (enabled) {
			if (IS_I945G(dev) || IS_I945GM(dev))
				I915_WRITE(FW_BLC_SELF,
					   FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
			else if (IS_I915GM(dev))
				I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
			DRM_DEBUG_KMS("memory self refresh enabled\n");
		} else
			DRM_DEBUG_KMS("memory self refresh disabled\n");
	}
}

static void i830_update_wm(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct drm_crtc *crtc;
	uint32_t fwater_lo;
	int planea_wm;

	crtc = single_enabled_crtc(dev);
	if (crtc == NULL)
		return;

	planea_wm = intel_calculate_wm(crtc->mode.clock, &i830_wm_info,
				       dev_priv->display.get_fifo_size(dev, 0),
				       crtc->fb->bits_per_pixel / 8,
				       latency_ns);
	fwater_lo = I915_READ(FW_BLC) & ~0xfff;
	fwater_lo |= (3<<8) | planea_wm;

	DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);

	I915_WRITE(FW_BLC, fwater_lo);
}

#define ILK_LP0_PLANE_LATENCY		700
#define ILK_LP0_CURSOR_LATENCY		1300

/*
 * Check the wm result.
 *
 * If any calculated watermark values is larger than the maximum value that
 * can be programmed into the associated watermark register, that watermark
 * must be disabled.
 */
static bool ironlake_check_srwm(struct drm_device *dev, int level,
				int fbc_wm, int display_wm, int cursor_wm,
				const struct intel_watermark_params *display,
				const struct intel_watermark_params *cursor)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
		      " cursor %d\n", level, display_wm, fbc_wm, cursor_wm);

	if (fbc_wm > SNB_FBC_MAX_SRWM) {
		DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
			      fbc_wm, SNB_FBC_MAX_SRWM, level);

		/* fbc has it's own way to disable FBC WM */
		I915_WRITE(DISP_ARB_CTL,
			   I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
		return false;
	}

	if (display_wm > display->max_wm) {
		DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
			      display_wm, SNB_DISPLAY_MAX_SRWM, level);
		return false;
	}

	if (cursor_wm > cursor->max_wm) {
		DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
			      cursor_wm, SNB_CURSOR_MAX_SRWM, level);
		return false;
	}

	if (!(fbc_wm || display_wm || cursor_wm)) {
		DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
		return false;
	}

	return true;
}

/*
 * Compute watermark values of WM[1-3],
 */
static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane,
                  int latency_ns,
                  const struct intel_watermark_params *display,
                  const struct intel_watermark_params *cursor,
                  int *fbc_wm, int *display_wm, int *cursor_wm)
{
    struct drm_crtc *crtc;
    unsigned long line_time_us;
    int hdisplay, htotal, pixel_size, clock;
    int line_count, line_size;
    int small, large;
    int entries;

    if (!latency_ns) {
        *fbc_wm = *display_wm = *cursor_wm = 0;
        return false;
    }

    crtc = intel_get_crtc_for_plane(dev, plane);
    hdisplay = crtc->mode.hdisplay;
    htotal = crtc->mode.htotal;
    clock = crtc->mode.clock;
    pixel_size = crtc->fb->bits_per_pixel / 8;

    line_time_us = (htotal * 1000) / clock;
    line_count = (latency_ns / line_time_us + 1000) / 1000;
    line_size = hdisplay * pixel_size;

    /* Use the minimum of the small and large buffer method for primary */
    small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
    large = line_count * line_size;

    entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
    *display_wm = entries + display->guard_size;

    /*
     * Spec says:
     * FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
     */
    *fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2;

    /* calculate the self-refresh watermark for display cursor */
    entries = line_count * pixel_size * 64;
    entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
    *cursor_wm = entries + cursor->guard_size;

    return ironlake_check_srwm(dev, level,
                   *fbc_wm, *display_wm, *cursor_wm,
                   display, cursor);
}

static void ironlake_update_wm(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int fbc_wm, plane_wm, cursor_wm;
	unsigned int enabled;

	enabled = 0;
	if (g4x_compute_wm0(dev, 0,
			    &ironlake_display_wm_info,
			    ILK_LP0_PLANE_LATENCY,
			    &ironlake_cursor_wm_info,
			    ILK_LP0_CURSOR_LATENCY,
			    &plane_wm, &cursor_wm)) {
		I915_WRITE(WM0_PIPEA_ILK,
			   (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
		DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
			      " plane %d, " "cursor: %d\n",
			      plane_wm, cursor_wm);
		enabled |= 1;
	}

	if (g4x_compute_wm0(dev, 1,
			    &ironlake_display_wm_info,
			    ILK_LP0_PLANE_LATENCY,
			    &ironlake_cursor_wm_info,
			    ILK_LP0_CURSOR_LATENCY,
			    &plane_wm, &cursor_wm)) {
		I915_WRITE(WM0_PIPEB_ILK,
			   (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
		DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
			      " plane %d, cursor: %d\n",
			      plane_wm, cursor_wm);
		enabled |= 2;
	}

	/*
	 * Calculate and update the self-refresh watermark only when one
	 * display plane is used.
	 */
	I915_WRITE(WM3_LP_ILK, 0);
	I915_WRITE(WM2_LP_ILK, 0);
	I915_WRITE(WM1_LP_ILK, 0);

	if (!single_plane_enabled(enabled))
		return;
	enabled = ffs(enabled) - 1;

	/* WM1 */
	if (!ironlake_compute_srwm(dev, 1, enabled,
				   ILK_READ_WM1_LATENCY() * 500,
				   &ironlake_display_srwm_info,
				   &ironlake_cursor_srwm_info,
				   &fbc_wm, &plane_wm, &cursor_wm))
		return;

	I915_WRITE(WM1_LP_ILK,
		   WM1_LP_SR_EN |
		   (ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
		   (fbc_wm << WM1_LP_FBC_SHIFT) |
		   (plane_wm << WM1_LP_SR_SHIFT) |
		   cursor_wm);

	/* WM2 */
	if (!ironlake_compute_srwm(dev, 2, enabled,
				   ILK_READ_WM2_LATENCY() * 500,
				   &ironlake_display_srwm_info,
				   &ironlake_cursor_srwm_info,
				   &fbc_wm, &plane_wm, &cursor_wm))
		return;

	I915_WRITE(WM2_LP_ILK,
		   WM2_LP_EN |
		   (ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
		   (fbc_wm << WM1_LP_FBC_SHIFT) |
		   (plane_wm << WM1_LP_SR_SHIFT) |
		   cursor_wm);

	/*
	 * WM3 is unsupported on ILK, probably because we don't have latency
	 * data for that power state
	 */
}

void sandybridge_update_wm(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int latency = SNB_READ_WM0_LATENCY() * 100;	/* In unit 0.1us */
	int fbc_wm, plane_wm, cursor_wm;
	unsigned int enabled;

    ENTER();

	enabled = 0;
	if (g4x_compute_wm0(dev, 0,
			    &sandybridge_display_wm_info, latency,
			    &sandybridge_cursor_wm_info, latency,
			    &plane_wm, &cursor_wm)) {
		I915_WRITE(WM0_PIPEA_ILK,
			   (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
		DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
			      " plane %d, " "cursor: %d\n",
			      plane_wm, cursor_wm);
		enabled |= 1;
	}

	if (g4x_compute_wm0(dev, 1,
			    &sandybridge_display_wm_info, latency,
			    &sandybridge_cursor_wm_info, latency,
			    &plane_wm, &cursor_wm)) {
		I915_WRITE(WM0_PIPEB_ILK,
			   (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
		DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
			      " plane %d, cursor: %d\n",
			      plane_wm, cursor_wm);
		enabled |= 2;
	}

	/* IVB has 3 pipes */
	if (IS_IVYBRIDGE(dev) &&
	    g4x_compute_wm0(dev, 2,
			    &sandybridge_display_wm_info, latency,
			    &sandybridge_cursor_wm_info, latency,
			    &plane_wm, &cursor_wm)) {
		I915_WRITE(WM0_PIPEC_IVB,
			   (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
		DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
			      " plane %d, cursor: %d\n",
			      plane_wm, cursor_wm);
		enabled |= 3;
	}

	/*
	 * Calculate and update the self-refresh watermark only when one
	 * display plane is used.
	 *
	 * SNB support 3 levels of watermark.
	 *
	 * WM1/WM2/WM2 watermarks have to be enabled in the ascending order,
	 * and disabled in the descending order
	 *
	 */
	I915_WRITE(WM3_LP_ILK, 0);
	I915_WRITE(WM2_LP_ILK, 0);
	I915_WRITE(WM1_LP_ILK, 0);

	if (!single_plane_enabled(enabled) ||
	    dev_priv->sprite_scaling_enabled)
		return;
	enabled = ffs(enabled) - 1;

	/* WM1 */
	if (!ironlake_compute_srwm(dev, 1, enabled,
				   SNB_READ_WM1_LATENCY() * 500,
				   &sandybridge_display_srwm_info,
				   &sandybridge_cursor_srwm_info,
				   &fbc_wm, &plane_wm, &cursor_wm))
		return;

	I915_WRITE(WM1_LP_ILK,
		   WM1_LP_SR_EN |
		   (SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
		   (fbc_wm << WM1_LP_FBC_SHIFT) |
		   (plane_wm << WM1_LP_SR_SHIFT) |
		   cursor_wm);

	/* WM2 */
	if (!ironlake_compute_srwm(dev, 2, enabled,
				   SNB_READ_WM2_LATENCY() * 500,
				   &sandybridge_display_srwm_info,
				   &sandybridge_cursor_srwm_info,
				   &fbc_wm, &plane_wm, &cursor_wm))
		return;

	I915_WRITE(WM2_LP_ILK,
		   WM2_LP_EN |
		   (SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
		   (fbc_wm << WM1_LP_FBC_SHIFT) |
		   (plane_wm << WM1_LP_SR_SHIFT) |
		   cursor_wm);

	/* WM3 */
	if (!ironlake_compute_srwm(dev, 3, enabled,
				   SNB_READ_WM3_LATENCY() * 500,
				   &sandybridge_display_srwm_info,
				   &sandybridge_cursor_srwm_info,
				   &fbc_wm, &plane_wm, &cursor_wm))
		return;

	I915_WRITE(WM3_LP_ILK,
		   WM3_LP_EN |
		   (SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) |
		   (fbc_wm << WM1_LP_FBC_SHIFT) |
		   (plane_wm << WM1_LP_SR_SHIFT) |
		   cursor_wm);
}

static bool
sandybridge_compute_sprite_wm(struct drm_device *dev, int plane,
			      uint32_t sprite_width, int pixel_size,
			      const struct intel_watermark_params *display,
			      int display_latency_ns, int *sprite_wm)
{
	struct drm_crtc *crtc;
	int clock;
	int entries, tlb_miss;

	crtc = intel_get_crtc_for_plane(dev, plane);
	if (crtc->fb == NULL || !crtc->enabled) {
		*sprite_wm = display->guard_size;
		return false;
	}

	clock = crtc->mode.clock;

	/* Use the small buffer method to calculate the sprite watermark */
	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
	tlb_miss = display->fifo_size*display->cacheline_size -
		sprite_width * 8;
	if (tlb_miss > 0)
		entries += tlb_miss;
	entries = DIV_ROUND_UP(entries, display->cacheline_size);
	*sprite_wm = entries + display->guard_size;
	if (*sprite_wm > (int)display->max_wm)
		*sprite_wm = display->max_wm;

	return true;
}

static bool
sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane,
				uint32_t sprite_width, int pixel_size,
				const struct intel_watermark_params *display,
				int latency_ns, int *sprite_wm)
{
	struct drm_crtc *crtc;
	unsigned long line_time_us;
	int clock;
	int line_count, line_size;
	int small, large;
	int entries;

	if (!latency_ns) {
		*sprite_wm = 0;
		return false;
	}

	crtc = intel_get_crtc_for_plane(dev, plane);
	clock = crtc->mode.clock;

	line_time_us = (sprite_width * 1000) / clock;
	line_count = (latency_ns / line_time_us + 1000) / 1000;
	line_size = sprite_width * pixel_size;

	/* Use the minimum of the small and large buffer method for primary */
	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
	large = line_count * line_size;

	entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
	*sprite_wm = entries + display->guard_size;

	return *sprite_wm > 0x3ff ? false : true;
}

static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
					 uint32_t sprite_width, int pixel_size)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int latency = SNB_READ_WM0_LATENCY() * 100;	/* In unit 0.1us */
	int sprite_wm, reg;
	int ret;

	switch (pipe) {
	case 0:
		reg = WM0_PIPEA_ILK;
		break;
	case 1:
		reg = WM0_PIPEB_ILK;
		break;
	case 2:
		reg = WM0_PIPEC_IVB;
		break;
	default:
		return; /* bad pipe */
	}

	ret = sandybridge_compute_sprite_wm(dev, pipe, sprite_width, pixel_size,
					    &sandybridge_display_wm_info,
					    latency, &sprite_wm);
	if (!ret) {
		DRM_DEBUG_KMS("failed to compute sprite wm for pipe %d\n",
			      pipe);
		return;
	}

	I915_WRITE(reg, I915_READ(reg) | (sprite_wm << WM0_PIPE_SPRITE_SHIFT));
	DRM_DEBUG_KMS("sprite watermarks For pipe %d - %d\n", pipe, sprite_wm);


	ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
					      pixel_size,
					      &sandybridge_display_srwm_info,
					      SNB_READ_WM1_LATENCY() * 500,
					      &sprite_wm);
	if (!ret) {
		DRM_DEBUG_KMS("failed to compute sprite lp1 wm on pipe %d\n",
			      pipe);
		return;
	}
	I915_WRITE(WM1S_LP_ILK, sprite_wm);

	/* Only IVB has two more LP watermarks for sprite */
	if (!IS_IVYBRIDGE(dev))
		return;

	ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
					      pixel_size,
					      &sandybridge_display_srwm_info,
					      SNB_READ_WM2_LATENCY() * 500,
					      &sprite_wm);
	if (!ret) {
		DRM_DEBUG_KMS("failed to compute sprite lp2 wm on pipe %d\n",
			      pipe);
		return;
	}
	I915_WRITE(WM2S_LP_IVB, sprite_wm);

	ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
					      pixel_size,
					      &sandybridge_display_srwm_info,
					      SNB_READ_WM3_LATENCY() * 500,
					      &sprite_wm);
	if (!ret) {
		DRM_DEBUG_KMS("failed to compute sprite lp3 wm on pipe %d\n",
			      pipe);
		return;
	}
	I915_WRITE(WM3S_LP_IVB, sprite_wm);
}

/**
 * intel_update_watermarks - update FIFO watermark values based on current modes
 *
 * Calculate watermark values for the various WM regs based on current mode
 * and plane configuration.
 *
 * There are several cases to deal with here:
 *   - normal (i.e. non-self-refresh)
 *   - self-refresh (SR) mode
 *   - lines are large relative to FIFO size (buffer can hold up to 2)
 *   - lines are small relative to FIFO size (buffer can hold more than 2
 *     lines), so need to account for TLB latency
 *
 *   The normal calculation is:
 *     watermark = dotclock * bytes per pixel * latency
 *   where latency is platform & configuration dependent (we assume pessimal
 *   values here).
 *
 *   The SR calculation is:
 *     watermark = (trunc(latency/line time)+1) * surface width *
 *       bytes per pixel
 *   where
 *     line time = htotal / dotclock
 *     surface width = hdisplay for normal plane and 64 for cursor
 *   and latency is assumed to be high, as above.
 *
 * The final value programmed to the register should always be rounded up,
 * and include an extra 2 entries to account for clock crossings.
 *
 * We don't use the sprite, so we can ignore that.  And on Crestline we have
 * to set the non-SR watermarks to 8.
 */
static void intel_update_watermarks(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
    ENTER();
	if (dev_priv->display.update_wm)
		dev_priv->display.update_wm(dev);
    LEAVE();
}

void intel_update_sprite_watermarks(struct drm_device *dev, int pipe,
				    uint32_t sprite_width, int pixel_size)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	if (dev_priv->display.update_sprite_wm)
		dev_priv->display.update_sprite_wm(dev, pipe, sprite_width,
						   pixel_size);
}

static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
{
	if (i915_panel_use_ssc >= 0)
		return i915_panel_use_ssc != 0;
	return dev_priv->lvds_use_ssc
		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}

/**
 * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
 * @crtc: CRTC structure
 * @mode: requested mode
 *
 * A pipe may be connected to one or more outputs.  Based on the depth of the
 * attached framebuffer, choose a good color depth to use on the pipe.
 *
 * If possible, match the pipe depth to the fb depth.  In some cases, this
 * isn't ideal, because the connected output supports a lesser or restricted
 * set of depths.  Resolve that here:
 *    LVDS typically supports only 6bpc, so clamp down in that case
 *    HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
 *    Displays may support a restricted set as well, check EDID and clamp as
 *      appropriate.
 *    DP may want to dither down to 6bpc to fit larger modes
 *
 * RETURNS:
 * Dithering requirement (i.e. false if display bpc and pipe bpc match,
 * true if they don't match).
 */
static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
					 unsigned int *pipe_bpp,
					 struct drm_display_mode *mode)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct drm_encoder *encoder;
	struct drm_connector *connector;
	unsigned int display_bpc = UINT_MAX, bpc;

	/* Walk the encoders & connectors on this crtc, get min bpc */
	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
		struct intel_encoder *intel_encoder = to_intel_encoder(encoder);

		if (encoder->crtc != crtc)
			continue;

		if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
			unsigned int lvds_bpc;

			if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
			    LVDS_A3_POWER_UP)
				lvds_bpc = 8;
			else
				lvds_bpc = 6;

			if (lvds_bpc < display_bpc) {
				DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
				display_bpc = lvds_bpc;
			}
			continue;
		}

		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
			/* Use VBT settings if we have an eDP panel */
			unsigned int edp_bpc = dev_priv->edp.bpp / 3;

			if (edp_bpc < display_bpc) {
				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
				display_bpc = edp_bpc;
			}
			continue;
		}

		/* Not one of the known troublemakers, check the EDID */
		list_for_each_entry(connector, &dev->mode_config.connector_list,
				    head) {
			if (connector->encoder != encoder)
				continue;

			/* Don't use an invalid EDID bpc value */
			if (connector->display_info.bpc &&
			    connector->display_info.bpc < display_bpc) {
				DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
				display_bpc = connector->display_info.bpc;
			}
		}

		/*
		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
		 * through, clamp it down.  (Note: >12bpc will be caught below.)
		 */
		if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
			if (display_bpc > 8 && display_bpc < 12) {
				DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
				display_bpc = 12;
			} else {
				DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
				display_bpc = 8;
			}
		}
	}

	if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
		DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
		display_bpc = 6;
	}

	/*
	 * We could just drive the pipe at the highest bpc all the time and
	 * enable dithering as needed, but that costs bandwidth.  So choose
	 * the minimum value that expresses the full color range of the fb but
	 * also stays within the max display bpc discovered above.
	 */

	switch (crtc->fb->depth) {
	case 8:
		bpc = 8; /* since we go through a colormap */
		break;
	case 15:
	case 16:
		bpc = 6; /* min is 18bpp */
		break;
	case 24:
		bpc = 8;
		break;
	case 30:
		bpc = 10;
		break;
	case 48:
		bpc = 12;
		break;
	default:
		DRM_DEBUG("unsupported depth, assuming 24 bits\n");
		bpc = min((unsigned int)8, display_bpc);
		break;
	}

	display_bpc = min(display_bpc, bpc);

	DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
			 bpc, display_bpc);

	*pipe_bpp = display_bpc * 3;

	return display_bpc != bpc;
}

static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
                  struct drm_display_mode *mode,
                  struct drm_display_mode *adjusted_mode,
                  int x, int y,
                  struct drm_framebuffer *old_fb)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    int plane = intel_crtc->plane;
    int refclk, num_connectors = 0;
    intel_clock_t clock, reduced_clock;
    u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
    bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
    bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
    struct drm_mode_config *mode_config = &dev->mode_config;
    struct intel_encoder *encoder;
    const intel_limit_t *limit;
    int ret;
    u32 temp;
    u32 lvds_sync = 0;

    list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
        if (encoder->base.crtc != crtc)
            continue;

        switch (encoder->type) {
        case INTEL_OUTPUT_LVDS:
            is_lvds = true;
            break;
        case INTEL_OUTPUT_SDVO:
        case INTEL_OUTPUT_HDMI:
            is_sdvo = true;
            if (encoder->needs_tv_clock)
                is_tv = true;
            break;
        case INTEL_OUTPUT_DVO:
            is_dvo = true;
            break;
        case INTEL_OUTPUT_TVOUT:
            is_tv = true;
            break;
        case INTEL_OUTPUT_ANALOG:
            is_crt = true;
            break;
        case INTEL_OUTPUT_DISPLAYPORT:
            is_dp = true;
            break;
        }

        num_connectors++;
    }

    if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
        refclk = dev_priv->lvds_ssc_freq * 1000;
        DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
                  refclk / 1000);
    } else if (!IS_GEN2(dev)) {
        refclk = 96000;
    } else {
        refclk = 48000;
    }

    /*
     * Returns a set of divisors for the desired target clock with the given
     * refclk, or FALSE.  The returned values represent the clock equation:
     * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
     */
    limit = intel_limit(crtc, refclk);
    ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
    if (!ok) {
        DRM_ERROR("Couldn't find PLL settings for mode!\n");
        return -EINVAL;
    }

    /* Ensure that the cursor is valid for the new mode before changing... */
//    intel_crtc_update_cursor(crtc, true);

    if (is_lvds && dev_priv->lvds_downclock_avail) {
        has_reduced_clock = limit->find_pll(limit, crtc,
                            dev_priv->lvds_downclock,
                            refclk,
                            &reduced_clock);
        if (has_reduced_clock && (clock.p != reduced_clock.p)) {
            /*
             * If the different P is found, it means that we can't
             * switch the display clock by using the FP0/FP1.
             * In such case we will disable the LVDS downclock
             * feature.
             */
            DRM_DEBUG_KMS("Different P is found for "
                      "LVDS clock/downclock\n");
            has_reduced_clock = 0;
        }
    }
    /* SDVO TV has fixed PLL values depend on its clock range,
       this mirrors vbios setting. */
    if (is_sdvo && is_tv) {
        if (adjusted_mode->clock >= 100000
            && adjusted_mode->clock < 140500) {
            clock.p1 = 2;
            clock.p2 = 10;
            clock.n = 3;
            clock.m1 = 16;
            clock.m2 = 8;
        } else if (adjusted_mode->clock >= 140500
               && adjusted_mode->clock <= 200000) {
            clock.p1 = 1;
            clock.p2 = 10;
            clock.n = 6;
            clock.m1 = 12;
            clock.m2 = 8;
        }
    }

    if (IS_PINEVIEW(dev)) {
        fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
        if (has_reduced_clock)
            fp2 = (1 << reduced_clock.n) << 16 |
                reduced_clock.m1 << 8 | reduced_clock.m2;
    } else {
        fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
        if (has_reduced_clock)
            fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
                reduced_clock.m2;
    }

    dpll = DPLL_VGA_MODE_DIS;

    if (!IS_GEN2(dev)) {
        if (is_lvds)
            dpll |= DPLLB_MODE_LVDS;
        else
            dpll |= DPLLB_MODE_DAC_SERIAL;
        if (is_sdvo) {
            int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
            if (pixel_multiplier > 1) {
                if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
                    dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
            }
            dpll |= DPLL_DVO_HIGH_SPEED;
        }
        if (is_dp)
            dpll |= DPLL_DVO_HIGH_SPEED;

        /* compute bitmask from p1 value */
        if (IS_PINEVIEW(dev))
            dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
        else {
            dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
            if (IS_G4X(dev) && has_reduced_clock)
                dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
        }
        switch (clock.p2) {
        case 5:
            dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
            break;
        case 7:
            dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
            break;
        case 10:
            dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
            break;
        case 14:
            dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
            break;
        }
        if (INTEL_INFO(dev)->gen >= 4)
            dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
    } else {
        if (is_lvds) {
            dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
        } else {
            if (clock.p1 == 2)
                dpll |= PLL_P1_DIVIDE_BY_TWO;
            else
                dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
            if (clock.p2 == 4)
                dpll |= PLL_P2_DIVIDE_BY_4;
        }
    }

    if (is_sdvo && is_tv)
        dpll |= PLL_REF_INPUT_TVCLKINBC;
    else if (is_tv)
        /* XXX: just matching BIOS for now */
        /*  dpll |= PLL_REF_INPUT_TVCLKINBC; */
        dpll |= 3;
    else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
        dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
    else
        dpll |= PLL_REF_INPUT_DREFCLK;

    /* setup pipeconf */
    pipeconf = I915_READ(PIPECONF(pipe));

    /* Set up the display plane register */
    dspcntr = DISPPLANE_GAMMA_ENABLE;

    /* Ironlake's plane is forced to pipe, bit 24 is to
       enable color space conversion */
    if (pipe == 0)
        dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
    else
        dspcntr |= DISPPLANE_SEL_PIPE_B;

    if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
        /* Enable pixel doubling when the dot clock is > 90% of the (display)
         * core speed.
         *
         * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
         * pipe == 0 check?
         */
        if (mode->clock >
            dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
            pipeconf |= PIPECONF_DOUBLE_WIDE;
        else
            pipeconf &= ~PIPECONF_DOUBLE_WIDE;
    }

	/* default to 8bpc */
	pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
	if (is_dp) {
		if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
			pipeconf |= PIPECONF_BPP_6 |
				    PIPECONF_DITHER_EN |
				    PIPECONF_DITHER_TYPE_SP;
		}
	}

    dpll |= DPLL_VCO_ENABLE;

    DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
    drm_mode_debug_printmodeline(mode);

    I915_WRITE(FP0(pipe), fp);
    I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);

    POSTING_READ(DPLL(pipe));
    udelay(150);

    /* The LVDS pin pair needs to be on before the DPLLs are enabled.
     * This is an exception to the general rule that mode_set doesn't turn
     * things on.
     */
    if (is_lvds) {
        temp = I915_READ(LVDS);
        temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
        if (pipe == 1) {
            temp |= LVDS_PIPEB_SELECT;
        } else {
            temp &= ~LVDS_PIPEB_SELECT;
        }
        /* set the corresponsding LVDS_BORDER bit */
        temp |= dev_priv->lvds_border_bits;
        /* Set the B0-B3 data pairs corresponding to whether we're going to
         * set the DPLLs for dual-channel mode or not.
         */
        if (clock.p2 == 7)
            temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
        else
            temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);

        /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
         * appropriately here, but we need to look more thoroughly into how
         * panels behave in the two modes.
         */
        /* set the dithering flag on LVDS as needed */
        if (INTEL_INFO(dev)->gen >= 4) {
            if (dev_priv->lvds_dither)
                temp |= LVDS_ENABLE_DITHER;
            else
                temp &= ~LVDS_ENABLE_DITHER;
        }
        if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
            lvds_sync |= LVDS_HSYNC_POLARITY;
        if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
            lvds_sync |= LVDS_VSYNC_POLARITY;
        if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
            != lvds_sync) {
            char flags[2] = "-+";
            DRM_INFO("Changing LVDS panel from "
                 "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
                 flags[!(temp & LVDS_HSYNC_POLARITY)],
                 flags[!(temp & LVDS_VSYNC_POLARITY)],
                 flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
                 flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
            temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
            temp |= lvds_sync;
        }
        I915_WRITE(LVDS, temp);
    }

    if (is_dp) {
        intel_dp_set_m_n(crtc, mode, adjusted_mode);
    }

    I915_WRITE(DPLL(pipe), dpll);

    /* Wait for the clocks to stabilize. */
    POSTING_READ(DPLL(pipe));
    udelay(150);

    if (INTEL_INFO(dev)->gen >= 4) {
        temp = 0;
        if (is_sdvo) {
            temp = intel_mode_get_pixel_multiplier(adjusted_mode);
            if (temp > 1)
                temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
            else
                temp = 0;
        }
        I915_WRITE(DPLL_MD(pipe), temp);
    } else {
        /* The pixel multiplier can only be updated once the
         * DPLL is enabled and the clocks are stable.
         *
         * So write it again.
         */
        I915_WRITE(DPLL(pipe), dpll);
    }

    intel_crtc->lowfreq_avail = false;
    if (is_lvds && has_reduced_clock && i915_powersave) {
        I915_WRITE(FP1(pipe), fp2);
        intel_crtc->lowfreq_avail = true;
        if (HAS_PIPE_CXSR(dev)) {
            DRM_DEBUG_KMS("enabling CxSR downclocking\n");
            pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
        }
    } else {
        I915_WRITE(FP1(pipe), fp);
        if (HAS_PIPE_CXSR(dev)) {
            DRM_DEBUG_KMS("disabling CxSR downclocking\n");
            pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
        }
    }

    if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
        pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
        /* the chip adds 2 halflines automatically */
        adjusted_mode->crtc_vdisplay -= 1;
        adjusted_mode->crtc_vtotal -= 1;
        adjusted_mode->crtc_vblank_start -= 1;
        adjusted_mode->crtc_vblank_end -= 1;
        adjusted_mode->crtc_vsync_end -= 1;
        adjusted_mode->crtc_vsync_start -= 1;
    } else
		pipeconf &= ~PIPECONF_INTERLACE_MASK; /* progressive */

    I915_WRITE(HTOTAL(pipe),
           (adjusted_mode->crtc_hdisplay - 1) |
           ((adjusted_mode->crtc_htotal - 1) << 16));
    I915_WRITE(HBLANK(pipe),
           (adjusted_mode->crtc_hblank_start - 1) |
           ((adjusted_mode->crtc_hblank_end - 1) << 16));
    I915_WRITE(HSYNC(pipe),
           (adjusted_mode->crtc_hsync_start - 1) |
           ((adjusted_mode->crtc_hsync_end - 1) << 16));

    I915_WRITE(VTOTAL(pipe),
           (adjusted_mode->crtc_vdisplay - 1) |
           ((adjusted_mode->crtc_vtotal - 1) << 16));
    I915_WRITE(VBLANK(pipe),
           (adjusted_mode->crtc_vblank_start - 1) |
           ((adjusted_mode->crtc_vblank_end - 1) << 16));
    I915_WRITE(VSYNC(pipe),
           (adjusted_mode->crtc_vsync_start - 1) |
           ((adjusted_mode->crtc_vsync_end - 1) << 16));

    /* pipesrc and dspsize control the size that is scaled from,
     * which should always be the user's requested size.
     */
    I915_WRITE(DSPSIZE(plane),
           ((mode->vdisplay - 1) << 16) |
           (mode->hdisplay - 1));
    I915_WRITE(DSPPOS(plane), 0);
    I915_WRITE(PIPESRC(pipe),
           ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));

    I915_WRITE(PIPECONF(pipe), pipeconf);
    POSTING_READ(PIPECONF(pipe));
    intel_enable_pipe(dev_priv, pipe, false);

    intel_wait_for_vblank(dev, pipe);

    I915_WRITE(DSPCNTR(plane), dspcntr);
    POSTING_READ(DSPCNTR(plane));
    intel_enable_plane(dev_priv, plane, pipe);

    ret = intel_pipe_set_base(crtc, x, y, old_fb);

    intel_update_watermarks(dev);

    return ret;
}

/*
 * Initialize reference clocks when the driver loads
 */
void ironlake_init_pch_refclk(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct drm_mode_config *mode_config = &dev->mode_config;
	struct intel_encoder *encoder;
	u32 temp;
	bool has_lvds = false;
	bool has_cpu_edp = false;
	bool has_pch_edp = false;
	bool has_panel = false;
	bool has_ck505 = false;
	bool can_ssc = false;

	/* We need to take the global config into account */
		list_for_each_entry(encoder, &mode_config->encoder_list,
				    base.head) {
			switch (encoder->type) {
			case INTEL_OUTPUT_LVDS:
			has_panel = true;
				has_lvds = true;
			break;
			case INTEL_OUTPUT_EDP:
			has_panel = true;
			if (intel_encoder_is_pch_edp(&encoder->base))
				has_pch_edp = true;
			else
				has_cpu_edp = true;
				break;
			}
		}

	if (HAS_PCH_IBX(dev)) {
		has_ck505 = dev_priv->display_clock_mode;
		can_ssc = has_ck505;
	} else {
		has_ck505 = false;
		can_ssc = true;
	}

	DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
		      has_panel, has_lvds, has_pch_edp, has_cpu_edp,
		      has_ck505);

	/* Ironlake: try to setup display ref clock before DPLL
	 * enabling. This is only under driver's control after
	 * PCH B stepping, previous chipset stepping should be
	 * ignoring this setting.
	 */
	temp = I915_READ(PCH_DREF_CONTROL);
	/* Always enable nonspread source */
	temp &= ~DREF_NONSPREAD_SOURCE_MASK;

	if (has_ck505)
		temp |= DREF_NONSPREAD_CK505_ENABLE;
	else
	temp |= DREF_NONSPREAD_SOURCE_ENABLE;

	if (has_panel) {
	temp &= ~DREF_SSC_SOURCE_MASK;
	temp |= DREF_SSC_SOURCE_ENABLE;

		/* SSC must be turned on before enabling the CPU output  */
		if (intel_panel_use_ssc(dev_priv) && can_ssc) {
			DRM_DEBUG_KMS("Using SSC on panel\n");
			temp |= DREF_SSC1_ENABLE;
		}

		/* Get SSC going before enabling the outputs */
			I915_WRITE(PCH_DREF_CONTROL, temp);
			POSTING_READ(PCH_DREF_CONTROL);
			udelay(200);

		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;

		/* Enable CPU source on CPU attached eDP */
		if (has_cpu_edp) {
			if (intel_panel_use_ssc(dev_priv) && can_ssc) {
				DRM_DEBUG_KMS("Using SSC on eDP\n");
				temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
			}
			else
				temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
		} else
			temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;

		I915_WRITE(PCH_DREF_CONTROL, temp);
		POSTING_READ(PCH_DREF_CONTROL);
		udelay(200);
		} else {
		DRM_DEBUG_KMS("Disabling SSC entirely\n");

		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;

		/* Turn off CPU output */
		temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;

		I915_WRITE(PCH_DREF_CONTROL, temp);
		POSTING_READ(PCH_DREF_CONTROL);
		udelay(200);

		/* Turn off the SSC source */
		temp &= ~DREF_SSC_SOURCE_MASK;
		temp |= DREF_SSC_SOURCE_DISABLE;

		/* Turn off SSC1 */
		temp &= ~ DREF_SSC1_ENABLE;

		I915_WRITE(PCH_DREF_CONTROL, temp);
		POSTING_READ(PCH_DREF_CONTROL);
		udelay(200);
	}
}

static int ironlake_get_refclk(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_encoder *encoder;
	struct drm_mode_config *mode_config = &dev->mode_config;
	struct intel_encoder *edp_encoder = NULL;
	int num_connectors = 0;
	bool is_lvds = false;

	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
		if (encoder->base.crtc != crtc)
			continue;

		switch (encoder->type) {
		case INTEL_OUTPUT_LVDS:
			is_lvds = true;
			break;
		case INTEL_OUTPUT_EDP:
			edp_encoder = encoder;
			break;
		}
		num_connectors++;
	}

	if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
		DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
			      dev_priv->lvds_ssc_freq);
		return dev_priv->lvds_ssc_freq * 1000;
	}

	return 120000;
}

static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                  struct drm_display_mode *mode,
                  struct drm_display_mode *adjusted_mode,
                  int x, int y,
                  struct drm_framebuffer *old_fb)
{
    struct drm_device *dev = crtc->dev;
    struct drm_i915_private *dev_priv = dev->dev_private;
    struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
    int pipe = intel_crtc->pipe;
    int plane = intel_crtc->plane;
    int refclk, num_connectors = 0;
    intel_clock_t clock, reduced_clock;
    u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
    bool ok, has_reduced_clock = false, is_sdvo = false;
    bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
    struct intel_encoder *has_edp_encoder = NULL;
    struct drm_mode_config *mode_config = &dev->mode_config;
    struct intel_encoder *encoder;
    const intel_limit_t *limit;
    int ret;
    struct fdi_m_n m_n = {0};
    u32 temp;
    u32 lvds_sync = 0;
    int target_clock, pixel_multiplier, lane, link_bw, factor;
    unsigned int pipe_bpp;
    bool dither;

    ENTER();

    list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
        if (encoder->base.crtc != crtc)
            continue;

        switch (encoder->type) {
        case INTEL_OUTPUT_LVDS:
            is_lvds = true;
            break;
        case INTEL_OUTPUT_SDVO:
        case INTEL_OUTPUT_HDMI:
            is_sdvo = true;
            if (encoder->needs_tv_clock)
                is_tv = true;
            break;
        case INTEL_OUTPUT_TVOUT:
            is_tv = true;
            break;
        case INTEL_OUTPUT_ANALOG:
            is_crt = true;
            break;
        case INTEL_OUTPUT_DISPLAYPORT:
            is_dp = true;
            break;
        case INTEL_OUTPUT_EDP:
            has_edp_encoder = encoder;
            break;
        }

        num_connectors++;
    }

	refclk = ironlake_get_refclk(crtc);

    /*
     * Returns a set of divisors for the desired target clock with the given
     * refclk, or FALSE.  The returned values represent the clock equation:
     * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
     */
    limit = intel_limit(crtc, refclk);
    ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
    if (!ok) {
        DRM_ERROR("Couldn't find PLL settings for mode!\n");
        return -EINVAL;
    }

    /* Ensure that the cursor is valid for the new mode before changing... */
//    intel_crtc_update_cursor(crtc, true);

    if (is_lvds && dev_priv->lvds_downclock_avail) {
        has_reduced_clock = limit->find_pll(limit, crtc,
                            dev_priv->lvds_downclock,
                            refclk,
                            &reduced_clock);
        if (has_reduced_clock && (clock.p != reduced_clock.p)) {
            /*
             * If the different P is found, it means that we can't
             * switch the display clock by using the FP0/FP1.
             * In such case we will disable the LVDS downclock
             * feature.
             */
            DRM_DEBUG_KMS("Different P is found for "
                      "LVDS clock/downclock\n");
            has_reduced_clock = 0;
        }
    }
    /* SDVO TV has fixed PLL values depend on its clock range,
       this mirrors vbios setting. */
    if (is_sdvo && is_tv) {
        if (adjusted_mode->clock >= 100000
            && adjusted_mode->clock < 140500) {
            clock.p1 = 2;
            clock.p2 = 10;
            clock.n = 3;
            clock.m1 = 16;
            clock.m2 = 8;
        } else if (adjusted_mode->clock >= 140500
               && adjusted_mode->clock <= 200000) {
            clock.p1 = 1;
            clock.p2 = 10;
            clock.n = 6;
            clock.m1 = 12;
            clock.m2 = 8;
        }
    }

    /* FDI link */
    pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
    lane = 0;
    /* CPU eDP doesn't require FDI link, so just set DP M/N
       according to current link config */
    if (has_edp_encoder &&
        !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
        target_clock = mode->clock;
        intel_edp_link_config(has_edp_encoder,
                      &lane, &link_bw);
    } else {
        /* [e]DP over FDI requires target mode clock
           instead of link clock */
        if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
            target_clock = mode->clock;
        else
            target_clock = adjusted_mode->clock;

        /* FDI is a binary signal running at ~2.7GHz, encoding
         * each output octet as 10 bits. The actual frequency
         * is stored as a divider into a 100MHz clock, and the
         * mode pixel clock is stored in units of 1KHz.
         * Hence the bw of each lane in terms of the mode signal
         * is:
         */
        link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
    }

    /* determine panel color depth */
    temp = I915_READ(PIPECONF(pipe));
    temp &= ~PIPE_BPC_MASK;
	dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
    switch (pipe_bpp) {
    case 18:
        temp |= PIPE_6BPC;
        break;
    case 24:
        temp |= PIPE_8BPC;
        break;
    case 30:
        temp |= PIPE_10BPC;
        break;
    case 36:
        temp |= PIPE_12BPC;
        break;
    default:
        WARN(1, "intel_choose_pipe_bpp returned invalid value %d\n",
            pipe_bpp);
        temp |= PIPE_8BPC;
        pipe_bpp = 24;
        break;
    }

    intel_crtc->bpp = pipe_bpp;
    I915_WRITE(PIPECONF(pipe), temp);

    if (!lane) {
        /*
         * Account for spread spectrum to avoid
         * oversubscribing the link. Max center spread
         * is 2.5%; use 5% for safety's sake.
         */
        u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
        lane = bps / (link_bw * 8) + 1;
    }

    intel_crtc->fdi_lanes = lane;

    if (pixel_multiplier > 1)
        link_bw *= pixel_multiplier;
    ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
                 &m_n);

    fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
    if (has_reduced_clock)
        fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
            reduced_clock.m2;

    /* Enable autotuning of the PLL clock (if permissible) */
    factor = 21;
    if (is_lvds) {
        if ((intel_panel_use_ssc(dev_priv) &&
             dev_priv->lvds_ssc_freq == 100) ||
            (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
            factor = 25;
    } else if (is_sdvo && is_tv)
        factor = 20;

    if (clock.m < factor * clock.n)
        fp |= FP_CB_TUNE;

    dpll = 0;

    if (is_lvds)
        dpll |= DPLLB_MODE_LVDS;
    else
        dpll |= DPLLB_MODE_DAC_SERIAL;
    if (is_sdvo) {
        int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
        if (pixel_multiplier > 1) {
            dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
        }
        dpll |= DPLL_DVO_HIGH_SPEED;
    }
    if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
        dpll |= DPLL_DVO_HIGH_SPEED;

    /* compute bitmask from p1 value */
    dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
    /* also FPA1 */
    dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;

    switch (clock.p2) {
    case 5:
        dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
        break;
    case 7:
        dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
        break;
    case 10:
        dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
        break;
    case 14:
        dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
        break;
    }

    if (is_sdvo && is_tv)
        dpll |= PLL_REF_INPUT_TVCLKINBC;
    else if (is_tv)
        /* XXX: just matching BIOS for now */
        /*  dpll |= PLL_REF_INPUT_TVCLKINBC; */
        dpll |= 3;
    else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
        dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
    else
        dpll |= PLL_REF_INPUT_DREFCLK;

    /* setup pipeconf */
    pipeconf = I915_READ(PIPECONF(pipe));

    /* Set up the display plane register */
    dspcntr = DISPPLANE_GAMMA_ENABLE;

	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
    drm_mode_debug_printmodeline(mode);

    /* PCH eDP needs FDI, but CPU eDP does not */
	if (!intel_crtc->no_pll) {
		if (!has_edp_encoder ||
		    intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
        I915_WRITE(PCH_FP0(pipe), fp);
        I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);

        POSTING_READ(PCH_DPLL(pipe));
        udelay(150);
    }
	} else {
		if (dpll == (I915_READ(PCH_DPLL(0)) & 0x7fffffff) &&
		    fp == I915_READ(PCH_FP0(0))) {
			intel_crtc->use_pll_a = true;
			DRM_DEBUG_KMS("using pipe a dpll\n");
		} else if (dpll == (I915_READ(PCH_DPLL(1)) & 0x7fffffff) &&
			   fp == I915_READ(PCH_FP0(1))) {
			intel_crtc->use_pll_a = false;
			DRM_DEBUG_KMS("using pipe b dpll\n");
		} else {
			DRM_DEBUG_KMS("no matching PLL configuration for pipe 2\n");
			return -EINVAL;
        }
    }

    /* The LVDS pin pair needs to be on before the DPLLs are enabled.
     * This is an exception to the general rule that mode_set doesn't turn
     * things on.
     */
    if (is_lvds) {
        temp = I915_READ(PCH_LVDS);
        temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
		if (HAS_PCH_CPT(dev)) {
			temp &= ~PORT_TRANS_SEL_MASK;
			temp |= PORT_TRANS_SEL_CPT(pipe);
		} else {
			if (pipe == 1)
                temp |= LVDS_PIPEB_SELECT;
            else
                temp &= ~LVDS_PIPEB_SELECT;
        }

        /* set the corresponsding LVDS_BORDER bit */
        temp |= dev_priv->lvds_border_bits;
        /* Set the B0-B3 data pairs corresponding to whether we're going to
         * set the DPLLs for dual-channel mode or not.
         */
        if (clock.p2 == 7)
            temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
        else
            temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);

        /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
         * appropriately here, but we need to look more thoroughly into how
         * panels behave in the two modes.
         */
        if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
            lvds_sync |= LVDS_HSYNC_POLARITY;
        if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
            lvds_sync |= LVDS_VSYNC_POLARITY;
        if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
            != lvds_sync) {
            char flags[2] = "-+";
            DRM_INFO("Changing LVDS panel from "
                 "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
                 flags[!(temp & LVDS_HSYNC_POLARITY)],
                 flags[!(temp & LVDS_VSYNC_POLARITY)],
                 flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
                 flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
            temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
            temp |= lvds_sync;
        }
        I915_WRITE(PCH_LVDS, temp);
    }

    pipeconf &= ~PIPECONF_DITHER_EN;
    pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
    if ((is_lvds && dev_priv->lvds_dither) || dither) {
        pipeconf |= PIPECONF_DITHER_EN;
		pipeconf |= PIPECONF_DITHER_TYPE_SP;
    }
    if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
        intel_dp_set_m_n(crtc, mode, adjusted_mode);
    } else {
        /* For non-DP output, clear any trans DP clock recovery setting.*/
        I915_WRITE(TRANSDATA_M1(pipe), 0);
        I915_WRITE(TRANSDATA_N1(pipe), 0);
        I915_WRITE(TRANSDPLINK_M1(pipe), 0);
        I915_WRITE(TRANSDPLINK_N1(pipe), 0);
    }

	if (!intel_crtc->no_pll &&
	    (!has_edp_encoder ||
	     intel_encoder_is_pch_edp(&has_edp_encoder->base))) {
        I915_WRITE(PCH_DPLL(pipe), dpll);

        /* Wait for the clocks to stabilize. */
        POSTING_READ(PCH_DPLL(pipe));
        udelay(150);

        /* The pixel multiplier can only be updated once the
         * DPLL is enabled and the clocks are stable.
         *
         * So write it again.
         */
        I915_WRITE(PCH_DPLL(pipe), dpll);
    }

    intel_crtc->lowfreq_avail = false;
	if (!intel_crtc->no_pll) {
    if (is_lvds && has_reduced_clock && i915_powersave) {
        I915_WRITE(PCH_FP1(pipe), fp2);
        intel_crtc->lowfreq_avail = true;
        if (HAS_PIPE_CXSR(dev)) {
            DRM_DEBUG_KMS("enabling CxSR downclocking\n");
            pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
        }
    } else {
        I915_WRITE(PCH_FP1(pipe), fp);
        if (HAS_PIPE_CXSR(dev)) {
            DRM_DEBUG_KMS("disabling CxSR downclocking\n");
            pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
        }
    }
	}

    if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
        pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
        /* the chip adds 2 halflines automatically */
        adjusted_mode->crtc_vdisplay -= 1;
        adjusted_mode->crtc_vtotal -= 1;
        adjusted_mode->crtc_vblank_start -= 1;
        adjusted_mode->crtc_vblank_end -= 1;
        adjusted_mode->crtc_vsync_end -= 1;
        adjusted_mode->crtc_vsync_start -= 1;
    } else
        pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */

    I915_WRITE(HTOTAL(pipe),
           (adjusted_mode->crtc_hdisplay - 1) |
           ((adjusted_mode->crtc_htotal - 1) << 16));
    I915_WRITE(HBLANK(pipe),
           (adjusted_mode->crtc_hblank_start - 1) |
           ((adjusted_mode->crtc_hblank_end - 1) << 16));
    I915_WRITE(HSYNC(pipe),
           (adjusted_mode->crtc_hsync_start - 1) |
           ((adjusted_mode->crtc_hsync_end - 1) << 16));

    I915_WRITE(VTOTAL(pipe),
           (adjusted_mode->crtc_vdisplay - 1) |
           ((adjusted_mode->crtc_vtotal - 1) << 16));
    I915_WRITE(VBLANK(pipe),
           (adjusted_mode->crtc_vblank_start - 1) |
           ((adjusted_mode->crtc_vblank_end - 1) << 16));
    I915_WRITE(VSYNC(pipe),
           (adjusted_mode->crtc_vsync_start - 1) |
           ((adjusted_mode->crtc_vsync_end - 1) << 16));

    /* pipesrc controls the size that is scaled from, which should
     * always be the user's requested size.
     */
    I915_WRITE(PIPESRC(pipe),
           ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));

    I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
    I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
    I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
    I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);

    if (has_edp_encoder &&
        !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
        ironlake_set_pll_edp(crtc, adjusted_mode->clock);
    }

    I915_WRITE(PIPECONF(pipe), pipeconf);
    POSTING_READ(PIPECONF(pipe));

    intel_wait_for_vblank(dev, pipe);

    if (IS_GEN5(dev)) {
        /* enable address swizzle for tiling buffer */
        temp = I915_READ(DISP_ARB_CTL);
        I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
    }

    I915_WRITE(DSPCNTR(plane), dspcntr);
    POSTING_READ(DSPCNTR(plane));

    ret = intel_pipe_set_base(crtc, x, y, old_fb);

    dbgprintf("Set base\n");

    intel_update_watermarks(dev);

    LEAVE();

    return ret;
}

static int intel_crtc_mode_set(struct drm_crtc *crtc,
			       struct drm_display_mode *mode,
			       struct drm_display_mode *adjusted_mode,
			       int x, int y,
			       struct drm_framebuffer *old_fb)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int pipe = intel_crtc->pipe;
	int ret;

//	drm_vblank_pre_modeset(dev, pipe);
    ENTER();

	ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
					      x, y, old_fb);

//	drm_vblank_post_modeset(dev, pipe);

	intel_crtc->dpms_mode = DRM_MODE_DPMS_ON;
    LEAVE();

	return ret;
}

static bool intel_eld_uptodate(struct drm_connector *connector,
			       int reg_eldv, uint32_t bits_eldv,
			       int reg_elda, uint32_t bits_elda,
			       int reg_edid)
{
	struct drm_i915_private *dev_priv = connector->dev->dev_private;
	uint8_t *eld = connector->eld;
	uint32_t i;

	i = I915_READ(reg_eldv);
	i &= bits_eldv;

	if (!eld[0])
		return !i;

	if (!i)
		return false;

	i = I915_READ(reg_elda);
	i &= ~bits_elda;
	I915_WRITE(reg_elda, i);

	for (i = 0; i < eld[2]; i++)
		if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
			return false;

	return true;
}

static void g4x_write_eld(struct drm_connector *connector,
			  struct drm_crtc *crtc)
{
	struct drm_i915_private *dev_priv = connector->dev->dev_private;
	uint8_t *eld = connector->eld;
	uint32_t eldv;
	uint32_t len;
	uint32_t i;

	i = I915_READ(G4X_AUD_VID_DID);

	if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
		eldv = G4X_ELDV_DEVCL_DEVBLC;
	else
		eldv = G4X_ELDV_DEVCTG;

	if (intel_eld_uptodate(connector,
			       G4X_AUD_CNTL_ST, eldv,
			       G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
			       G4X_HDMIW_HDMIEDID))
		return;

	i = I915_READ(G4X_AUD_CNTL_ST);
	i &= ~(eldv | G4X_ELD_ADDR);
	len = (i >> 9) & 0x1f;		/* ELD buffer size */
	I915_WRITE(G4X_AUD_CNTL_ST, i);

	if (!eld[0])
		return;

	len = min_t(uint8_t, eld[2], len);
	DRM_DEBUG_DRIVER("ELD size %d\n", len);
	for (i = 0; i < len; i++)
		I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));

	i = I915_READ(G4X_AUD_CNTL_ST);
	i |= eldv;
	I915_WRITE(G4X_AUD_CNTL_ST, i);
}

static void ironlake_write_eld(struct drm_connector *connector,
				     struct drm_crtc *crtc)
{
	struct drm_i915_private *dev_priv = connector->dev->dev_private;
	uint8_t *eld = connector->eld;
	uint32_t eldv;
	uint32_t i;
	int len;
	int hdmiw_hdmiedid;
	int aud_cntl_st;
	int aud_cntrl_st2;

	if (HAS_PCH_IBX(connector->dev)) {
		hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
		aud_cntl_st = IBX_AUD_CNTL_ST_A;
		aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
	} else {
		hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
		aud_cntl_st = CPT_AUD_CNTL_ST_A;
		aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
	}

	i = to_intel_crtc(crtc)->pipe;
	hdmiw_hdmiedid += i * 0x100;
	aud_cntl_st += i * 0x100;

	DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));

	i = I915_READ(aud_cntl_st);
	i = (i >> 29) & 0x3;		/* DIP_Port_Select, 0x1 = PortB */
	if (!i) {
		DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
		/* operate blindly on all ports */
		eldv = IBX_ELD_VALIDB;
		eldv |= IBX_ELD_VALIDB << 4;
		eldv |= IBX_ELD_VALIDB << 8;
	} else {
		DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
		eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
	}

	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
		DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
		eld[5] |= (1 << 2);	/* Conn_Type, 0x1 = DisplayPort */
	}

	if (intel_eld_uptodate(connector,
			       aud_cntrl_st2, eldv,
			       aud_cntl_st, IBX_ELD_ADDRESS,
			       hdmiw_hdmiedid))
		return;

	i = I915_READ(aud_cntrl_st2);
	i &= ~eldv;
	I915_WRITE(aud_cntrl_st2, i);

	if (!eld[0])
		return;

	i = I915_READ(aud_cntl_st);
	i &= ~IBX_ELD_ADDRESS;
	I915_WRITE(aud_cntl_st, i);

	len = min_t(uint8_t, eld[2], 21);	/* 84 bytes of hw ELD buffer */
	DRM_DEBUG_DRIVER("ELD size %d\n", len);
	for (i = 0; i < len; i++)
		I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));

	i = I915_READ(aud_cntrl_st2);
	i |= eldv;
	I915_WRITE(aud_cntrl_st2, i);
}

void intel_write_eld(struct drm_encoder *encoder,
		     struct drm_display_mode *mode)
{
	struct drm_crtc *crtc = encoder->crtc;
	struct drm_connector *connector;
	struct drm_device *dev = encoder->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;

	connector = drm_select_eld(encoder, mode);
	if (!connector)
		return;

	DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
			 connector->base.id,
			 drm_get_connector_name(connector),
			 connector->encoder->base.id,
			 drm_get_encoder_name(connector->encoder));

	connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;

	if (dev_priv->display.write_eld)
		dev_priv->display.write_eld(connector, crtc);
}

/** Loads the palette/gamma unit for the CRTC with the prepared values */
void intel_crtc_load_lut(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int palreg = PALETTE(intel_crtc->pipe);
	int i;

	/* The clocks have to be on to load the palette. */
	if (!crtc->enabled)
		return;

	/* use legacy palette for Ironlake */
	if (HAS_PCH_SPLIT(dev))
		palreg = LGC_PALETTE(intel_crtc->pipe);

	for (i = 0; i < 256; i++) {
		I915_WRITE(palreg + 4 * i,
			   (intel_crtc->lut_r[i] << 16) |
			   (intel_crtc->lut_g[i] << 8) |
			   intel_crtc->lut_b[i]);
	}
}





































/** Sets the color ramps on behalf of RandR */
void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
				 u16 blue, int regno)
{
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

	intel_crtc->lut_r[regno] = red >> 8;
	intel_crtc->lut_g[regno] = green >> 8;
	intel_crtc->lut_b[regno] = blue >> 8;
}

void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
			     u16 *blue, int regno)
{
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

	*red = intel_crtc->lut_r[regno] << 8;
	*green = intel_crtc->lut_g[regno] << 8;
	*blue = intel_crtc->lut_b[regno] << 8;
}

static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
				 u16 *blue, uint32_t start, uint32_t size)
{
	int end = (start + size > 256) ? 256 : start + size, i;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

	for (i = start; i < end; i++) {
		intel_crtc->lut_r[i] = red[i] >> 8;
		intel_crtc->lut_g[i] = green[i] >> 8;
		intel_crtc->lut_b[i] = blue[i] >> 8;
	}

	intel_crtc_load_lut(crtc);
}

/**
 * Get a pipe with a simple mode set on it for doing load-based monitor
 * detection.
 *
 * It will be up to the load-detect code to adjust the pipe as appropriate for
 * its requirements.  The pipe will be connected to no other encoders.
 *
 * Currently this code will only succeed if there is a pipe with no encoders
 * configured for it.  In the future, it could choose to temporarily disable
 * some outputs to free up a pipe for its use.
 *
 * \return crtc, or NULL if no pipes are available.
 */

/* VESA 640x480x72Hz mode to set on the pipe */
static struct drm_display_mode load_detect_mode = {
	DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
		 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
};





static u32
intel_framebuffer_pitch_for_width(int width, int bpp)
{
	u32 pitch = DIV_ROUND_UP(width * bpp, 8);
	return ALIGN(pitch, 64);
}

static u32
intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
{
	u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
	return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
}

static struct drm_framebuffer *
intel_framebuffer_create_for_mode(struct drm_device *dev,
				  struct drm_display_mode *mode,
				  int depth, int bpp)
{
	struct drm_i915_gem_object *obj;
	struct drm_mode_fb_cmd2 mode_cmd;

//	obj = i915_gem_alloc_object(dev,
//				    intel_framebuffer_size_for_mode(mode, bpp));
//	if (obj == NULL)
		return ERR_PTR(-ENOMEM);

//	mode_cmd.width = mode->hdisplay;
//	mode_cmd.height = mode->vdisplay;
//	mode_cmd.depth = depth;
//	mode_cmd.bpp = bpp;
//	mode_cmd.pitch = intel_framebuffer_pitch_for_width(mode_cmd.width, bpp);

//	return intel_framebuffer_create(dev, &mode_cmd, obj);
}

static struct drm_framebuffer *
mode_fits_in_fbdev(struct drm_device *dev,
		   struct drm_display_mode *mode)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct drm_i915_gem_object *obj;
	struct drm_framebuffer *fb;

//	if (dev_priv->fbdev == NULL)
//		return NULL;

//	obj = dev_priv->fbdev->ifb.obj;
//	if (obj == NULL)
//		return NULL;

//	fb = &dev_priv->fbdev->ifb.base;
//	if (fb->pitch < intel_framebuffer_pitch_for_width(mode->hdisplay,
//							  fb->bits_per_pixel))
		return NULL;

//	if (obj->base.size < mode->vdisplay * fb->pitch)
//		return NULL;

//	return fb;
}

bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
				struct drm_connector *connector,
				struct drm_display_mode *mode,
				struct intel_load_detect_pipe *old)
{
	struct intel_crtc *intel_crtc;
	struct drm_crtc *possible_crtc;
	struct drm_encoder *encoder = &intel_encoder->base;
	struct drm_crtc *crtc = NULL;
	struct drm_device *dev = encoder->dev;
	struct drm_framebuffer *old_fb;
	int i = -1;

	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
		      connector->base.id, drm_get_connector_name(connector),
		      encoder->base.id, drm_get_encoder_name(encoder));

	/*
	 * Algorithm gets a little messy:
	 *
	 *   - if the connector already has an assigned crtc, use it (but make
	 *     sure it's on first)
	 *
	 *   - try to find the first unused crtc that can drive this connector,
	 *     and use that if we find one
	 */

	/* See if we already have a CRTC for this connector */
	if (encoder->crtc) {
		crtc = encoder->crtc;

		intel_crtc = to_intel_crtc(crtc);
		old->dpms_mode = intel_crtc->dpms_mode;
		old->load_detect_temp = false;

		/* Make sure the crtc and connector are running */
		if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
			struct drm_encoder_helper_funcs *encoder_funcs;
			struct drm_crtc_helper_funcs *crtc_funcs;

			crtc_funcs = crtc->helper_private;
			crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);

			encoder_funcs = encoder->helper_private;
			encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
		}

		return true;
	}

	/* Find an unused one (if possible) */
	list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
		i++;
		if (!(encoder->possible_crtcs & (1 << i)))
			continue;
		if (!possible_crtc->enabled) {
			crtc = possible_crtc;
			break;
		}
	}

	/*
	 * If we didn't find an unused CRTC, don't use any.
	 */
	if (!crtc) {
		DRM_DEBUG_KMS("no pipe available for load-detect\n");
		return false;
	}

	encoder->crtc = crtc;
	connector->encoder = encoder;

	intel_crtc = to_intel_crtc(crtc);
	old->dpms_mode = intel_crtc->dpms_mode;
	old->load_detect_temp = true;
	old->release_fb = NULL;

	if (!mode)
		mode = &load_detect_mode;

	old_fb = crtc->fb;

	/* We need a framebuffer large enough to accommodate all accesses
	 * that the plane may generate whilst we perform load detection.
	 * We can not rely on the fbcon either being present (we get called
	 * during its initialisation to detect all boot displays, or it may
	 * not even exist) or that it is large enough to satisfy the
	 * requested mode.
	 */
	crtc->fb = mode_fits_in_fbdev(dev, mode);
	if (crtc->fb == NULL) {
		DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
		crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
		old->release_fb = crtc->fb;
	} else
		DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
	if (IS_ERR(crtc->fb)) {
		DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
		crtc->fb = old_fb;
		return false;
	}

	if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) {
		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
		if (old->release_fb)
			old->release_fb->funcs->destroy(old->release_fb);
		crtc->fb = old_fb;
		return false;
	}

	/* let the connector get through one full cycle before testing */
	intel_wait_for_vblank(dev, intel_crtc->pipe);

	return true;
}

void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
				    struct drm_connector *connector,
				    struct intel_load_detect_pipe *old)
{
	struct drm_encoder *encoder = &intel_encoder->base;
	struct drm_device *dev = encoder->dev;
	struct drm_crtc *crtc = encoder->crtc;
	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;

	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
		      connector->base.id, drm_get_connector_name(connector),
		      encoder->base.id, drm_get_encoder_name(encoder));

	if (old->load_detect_temp) {
		connector->encoder = NULL;
		drm_helper_disable_unused_functions(dev);

		if (old->release_fb)
			old->release_fb->funcs->destroy(old->release_fb);

		return;
	}

	/* Switch crtc and encoder back off if necessary */
	if (old->dpms_mode != DRM_MODE_DPMS_ON) {
		encoder_funcs->dpms(encoder, old->dpms_mode);
		crtc_funcs->dpms(crtc, old->dpms_mode);
	}
}

/* Returns the clock of the currently programmed mode of the given pipe. */
static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int pipe = intel_crtc->pipe;
	u32 dpll = I915_READ(DPLL(pipe));
	u32 fp;
	intel_clock_t clock;

	if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
		fp = I915_READ(FP0(pipe));
	else
		fp = I915_READ(FP1(pipe));

	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
	if (IS_PINEVIEW(dev)) {
		clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
		clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
	} else {
		clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
		clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
	}

	if (!IS_GEN2(dev)) {
		if (IS_PINEVIEW(dev))
			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
				DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
		else
			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
			       DPLL_FPA01_P1_POST_DIV_SHIFT);

		switch (dpll & DPLL_MODE_MASK) {
		case DPLLB_MODE_DAC_SERIAL:
			clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
				5 : 10;
			break;
		case DPLLB_MODE_LVDS:
			clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
				7 : 14;
			break;
		default:
			DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
				  "mode\n", (int)(dpll & DPLL_MODE_MASK));
			return 0;
		}

		/* XXX: Handle the 100Mhz refclk */
		intel_clock(dev, 96000, &clock);
	} else {
		bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);

		if (is_lvds) {
			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
				       DPLL_FPA01_P1_POST_DIV_SHIFT);
			clock.p2 = 14;

			if ((dpll & PLL_REF_INPUT_MASK) ==
			    PLLB_REF_INPUT_SPREADSPECTRUMIN) {
				/* XXX: might not be 66MHz */
				intel_clock(dev, 66000, &clock);
			} else
				intel_clock(dev, 48000, &clock);
		} else {
			if (dpll & PLL_P1_DIVIDE_BY_TWO)
				clock.p1 = 2;
			else {
				clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
					    DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
			}
			if (dpll & PLL_P2_DIVIDE_BY_4)
				clock.p2 = 4;
			else
				clock.p2 = 2;

			intel_clock(dev, 48000, &clock);
		}
	}

	/* XXX: It would be nice to validate the clocks, but we can't reuse
	 * i830PllIsValid() because it relies on the xf86_config connector
	 * configuration being accurate, which it isn't necessarily.
	 */

	return clock.dot;
}

/** Returns the currently programmed mode of the given pipe. */
struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
					     struct drm_crtc *crtc)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int pipe = intel_crtc->pipe;
	struct drm_display_mode *mode;
	int htot = I915_READ(HTOTAL(pipe));
	int hsync = I915_READ(HSYNC(pipe));
	int vtot = I915_READ(VTOTAL(pipe));
	int vsync = I915_READ(VSYNC(pipe));

	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
	if (!mode)
		return NULL;

	mode->clock = intel_crtc_clock_get(dev, crtc);
	mode->hdisplay = (htot & 0xffff) + 1;
	mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
	mode->hsync_start = (hsync & 0xffff) + 1;
	mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
	mode->vdisplay = (vtot & 0xffff) + 1;
	mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
	mode->vsync_start = (vsync & 0xffff) + 1;
	mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;

	drm_mode_set_name(mode);
	drm_mode_set_crtcinfo(mode, 0);

	return mode;
}

#define GPU_IDLE_TIMEOUT 500 /* ms */




#define CRTC_IDLE_TIMEOUT 1000 /* ms */




static void intel_increase_pllclock(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	drm_i915_private_t *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	int pipe = intel_crtc->pipe;
	int dpll_reg = DPLL(pipe);
	int dpll;

    ENTER();

	if (HAS_PCH_SPLIT(dev))
		return;

	if (!dev_priv->lvds_downclock_avail)
		return;

	dpll = I915_READ(dpll_reg);
	if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
		DRM_DEBUG_DRIVER("upclocking LVDS\n");

		/* Unlock panel regs */
		I915_WRITE(PP_CONTROL,
			   I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);

		dpll &= ~DISPLAY_RATE_SELECT_FPA1;
		I915_WRITE(dpll_reg, dpll);
		intel_wait_for_vblank(dev, pipe);

		dpll = I915_READ(dpll_reg);
		if (dpll & DISPLAY_RATE_SELECT_FPA1)
			DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");

		/* ...and lock them again */
		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3);
	}

    LEAVE();

	/* Schedule downclock */
}






















static void intel_crtc_destroy(struct drm_crtc *crtc)
{
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	struct drm_device *dev = crtc->dev;
	struct intel_unpin_work *work;
	unsigned long flags;

	spin_lock_irqsave(&dev->event_lock, flags);
	work = intel_crtc->unpin_work;
	intel_crtc->unpin_work = NULL;
	spin_unlock_irqrestore(&dev->event_lock, flags);

	if (work) {
//		cancel_work_sync(&work->work);
		kfree(work);
	}

	drm_crtc_cleanup(crtc);

	kfree(intel_crtc);
}


































































static void intel_sanitize_modesetting(struct drm_device *dev,
				       int pipe, int plane)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 reg, val;

	if (HAS_PCH_SPLIT(dev))
		return;

	/* Who knows what state these registers were left in by the BIOS or
	 * grub?
	 *
	 * If we leave the registers in a conflicting state (e.g. with the
	 * display plane reading from the other pipe than the one we intend
	 * to use) then when we attempt to teardown the active mode, we will
	 * not disable the pipes and planes in the correct order -- leaving
	 * a plane reading from a disabled pipe and possibly leading to
	 * undefined behaviour.
	 */

	reg = DSPCNTR(plane);
	val = I915_READ(reg);

	if ((val & DISPLAY_PLANE_ENABLE) == 0)
		return;
	if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
		return;

	/* This display plane is active and attached to the other CPU pipe. */
	pipe = !pipe;

	/* Disable the plane and wait for it to stop reading from the pipe. */
	intel_disable_plane(dev_priv, plane, pipe);
	intel_disable_pipe(dev_priv, pipe);
}

static void intel_crtc_reset(struct drm_crtc *crtc)
{
	struct drm_device *dev = crtc->dev;
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

	/* Reset flags back to the 'unknown' status so that they
	 * will be correctly set on the initial modeset.
	 */
	intel_crtc->dpms_mode = -1;

	/* We need to fix up any BIOS configuration that conflicts with
	 * our expectations.
	 */
	intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
}

static struct drm_crtc_helper_funcs intel_helper_funcs = {
	.dpms = intel_crtc_dpms,
	.mode_fixup = intel_crtc_mode_fixup,
	.mode_set = intel_crtc_mode_set,
	.mode_set_base = intel_pipe_set_base,
	.mode_set_base_atomic = intel_pipe_set_base_atomic,
	.load_lut = intel_crtc_load_lut,
	.disable = intel_crtc_disable,
};

static const struct drm_crtc_funcs intel_crtc_funcs = {
	.reset = intel_crtc_reset,
//	.cursor_set = intel_crtc_cursor_set,
//	.cursor_move = intel_crtc_cursor_move,
	.gamma_set = intel_crtc_gamma_set,
	.set_config = drm_crtc_helper_set_config,
	.destroy = intel_crtc_destroy,
//	.page_flip = intel_crtc_page_flip,
};

static void intel_crtc_init(struct drm_device *dev, int pipe)
{
	drm_i915_private_t *dev_priv = dev->dev_private;
	struct intel_crtc *intel_crtc;
	int i;

	intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
	if (intel_crtc == NULL)
		return;

	drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);

	drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
	for (i = 0; i < 256; i++) {
		intel_crtc->lut_r[i] = i;
		intel_crtc->lut_g[i] = i;
		intel_crtc->lut_b[i] = i;
	}

	/* Swap pipes & planes for FBC on pre-965 */
	intel_crtc->pipe = pipe;
	intel_crtc->plane = pipe;
	if (IS_MOBILE(dev) && IS_GEN3(dev)) {
		DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
		intel_crtc->plane = !pipe;
	}

	BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
	       dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;

	intel_crtc_reset(&intel_crtc->base);
	intel_crtc->active = true; /* force the pipe off on setup_init_config */
	intel_crtc->bpp = 24; /* default for pre-Ironlake */

	if (HAS_PCH_SPLIT(dev)) {
		if (pipe == 2 && IS_IVYBRIDGE(dev))
			intel_crtc->no_pll = true;
		intel_helper_funcs.prepare = ironlake_crtc_prepare;
		intel_helper_funcs.commit = ironlake_crtc_commit;
	} else {
		intel_helper_funcs.prepare = i9xx_crtc_prepare;
		intel_helper_funcs.commit = i9xx_crtc_commit;
	}

	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);

	intel_crtc->busy = false;

}







static int intel_encoder_clones(struct drm_device *dev, int type_mask)
{
	struct intel_encoder *encoder;
	int index_mask = 0;
	int entry = 0;

	list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
		if (type_mask & encoder->clone_mask)
			index_mask |= (1 << entry);
		entry++;
	}

	return index_mask;
}

static bool has_edp_a(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	if (!IS_MOBILE(dev))
		return false;

	if ((I915_READ(DP_A) & DP_DETECTED) == 0)
		return false;

	if (IS_GEN5(dev) &&
	    (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
		return false;

	return true;
}

static void intel_setup_outputs(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_encoder *encoder;
	bool dpd_is_edp = false;
	bool has_lvds = false;

    ENTER();

	if (IS_MOBILE(dev) && !IS_I830(dev))
		has_lvds = intel_lvds_init(dev);
	if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
		/* disable the panel fitter on everything but LVDS */
		I915_WRITE(PFIT_CONTROL, 0);
	}

	if (HAS_PCH_SPLIT(dev)) {
		dpd_is_edp = intel_dpd_is_edp(dev);

		if (has_edp_a(dev))
			intel_dp_init(dev, DP_A);

		if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
			intel_dp_init(dev, PCH_DP_D);
	}

	intel_crt_init(dev);

	if (HAS_PCH_SPLIT(dev)) {
		int found;

		if (I915_READ(HDMIB) & PORT_DETECTED) {
			/* PCH SDVOB multiplex with HDMIB */
			found = intel_sdvo_init(dev, PCH_SDVOB);
			if (!found)
				intel_hdmi_init(dev, HDMIB);
			if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
				intel_dp_init(dev, PCH_DP_B);
		}

		if (I915_READ(HDMIC) & PORT_DETECTED)
			intel_hdmi_init(dev, HDMIC);

		if (I915_READ(HDMID) & PORT_DETECTED)
			intel_hdmi_init(dev, HDMID);

		if (I915_READ(PCH_DP_C) & DP_DETECTED)
			intel_dp_init(dev, PCH_DP_C);

		if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
			intel_dp_init(dev, PCH_DP_D);

	} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
		bool found = false;

		if (I915_READ(SDVOB) & SDVO_DETECTED) {
			DRM_DEBUG_KMS("probing SDVOB\n");
			found = intel_sdvo_init(dev, SDVOB);
			if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
				DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
				intel_hdmi_init(dev, SDVOB);
			}

			if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
				DRM_DEBUG_KMS("probing DP_B\n");
				intel_dp_init(dev, DP_B);
			}
		}

		/* Before G4X SDVOC doesn't have its own detect register */

		if (I915_READ(SDVOB) & SDVO_DETECTED) {
			DRM_DEBUG_KMS("probing SDVOC\n");
			found = intel_sdvo_init(dev, SDVOC);
		}

		if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {

			if (SUPPORTS_INTEGRATED_HDMI(dev)) {
				DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
				intel_hdmi_init(dev, SDVOC);
			}
			if (SUPPORTS_INTEGRATED_DP(dev)) {
				DRM_DEBUG_KMS("probing DP_C\n");
				intel_dp_init(dev, DP_C);
			}
		}

		if (SUPPORTS_INTEGRATED_DP(dev) &&
		    (I915_READ(DP_D) & DP_DETECTED)) {
			DRM_DEBUG_KMS("probing DP_D\n");
			intel_dp_init(dev, DP_D);
		}
	} else if (IS_GEN2(dev))
		intel_dvo_init(dev);

//   if (SUPPORTS_TV(dev))
//       intel_tv_init(dev);

	list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
		encoder->base.possible_crtcs = encoder->crtc_mask;
		encoder->base.possible_clones =
			intel_encoder_clones(dev, encoder->clone_mask);
	}

	/* disable all the possible outputs/crtcs before entering KMS mode */
//	drm_helper_disable_unused_functions(dev);

	if (HAS_PCH_SPLIT(dev))
		ironlake_init_pch_refclk(dev);

    LEAVE();
}




static const struct drm_mode_config_funcs intel_mode_funcs = {
	.fb_create = NULL /*intel_user_framebuffer_create*/,
	.output_poll_changed = NULL /*intel_fb_output_poll_changed*/,
};




static const struct drm_framebuffer_funcs intel_fb_funcs = {
//	.destroy = intel_user_framebuffer_destroy,
//	.create_handle = intel_user_framebuffer_create_handle,
};

int intel_framebuffer_init(struct drm_device *dev,
			   struct intel_framebuffer *intel_fb,
			   struct drm_mode_fb_cmd2 *mode_cmd,
			   struct drm_i915_gem_object *obj)
{
	int ret;

	if (obj->tiling_mode == I915_TILING_Y)
		return -EINVAL;

	if (mode_cmd->pitches[0] & 63)
			return -EINVAL;

	switch (mode_cmd->pixel_format) {
	case DRM_FORMAT_RGB332:
	case DRM_FORMAT_RGB565:
	case DRM_FORMAT_XRGB8888:
	case DRM_FORMAT_ARGB8888:
	case DRM_FORMAT_XRGB2101010:
	case DRM_FORMAT_ARGB2101010:
		/* RGB formats are common across chipsets */
		break;
	case DRM_FORMAT_YUYV:
	case DRM_FORMAT_UYVY:
	case DRM_FORMAT_YVYU:
	case DRM_FORMAT_VYUY:
		break;
	default:
		DRM_ERROR("unsupported pixel format\n");
		return -EINVAL;
	}

	ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
	if (ret) {
		DRM_ERROR("framebuffer init failed %d\n", ret);
		return ret;
	}

	drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
	intel_fb->obj = obj;
	return 0;
}












bool ironlake_set_drps(struct drm_device *dev, u8 val)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u16 rgvswctl;

	rgvswctl = I915_READ16(MEMSWCTL);
	if (rgvswctl & MEMCTL_CMD_STS) {
		DRM_DEBUG("gpu busy, RCS change rejected\n");
		return false; /* still busy with another command */
	}

	rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
		(val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
	I915_WRITE16(MEMSWCTL, rgvswctl);
	POSTING_READ16(MEMSWCTL);

	rgvswctl |= MEMCTL_CMD_STS;
	I915_WRITE16(MEMSWCTL, rgvswctl);

	return true;
}

void ironlake_enable_drps(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 rgvmodectl = I915_READ(MEMMODECTL);
	u8 fmax, fmin, fstart, vstart;

	/* Enable temp reporting */
	I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
	I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);

	/* 100ms RC evaluation intervals */
	I915_WRITE(RCUPEI, 100000);
	I915_WRITE(RCDNEI, 100000);

	/* Set max/min thresholds to 90ms and 80ms respectively */
	I915_WRITE(RCBMAXAVG, 90000);
	I915_WRITE(RCBMINAVG, 80000);

	I915_WRITE(MEMIHYST, 1);

	/* Set up min, max, and cur for interrupt handling */
	fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
	fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
	fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
		MEMMODE_FSTART_SHIFT;

	vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
		PXVFREQ_PX_SHIFT;

	dev_priv->fmax = fmax; /* IPS callback will increase this */
	dev_priv->fstart = fstart;

	dev_priv->max_delay = fstart;
	dev_priv->min_delay = fmin;
	dev_priv->cur_delay = fstart;

	DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
			 fmax, fmin, fstart);

	I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);

	/*
	 * Interrupts will be enabled in ironlake_irq_postinstall
	 */

	I915_WRITE(VIDSTART, vstart);
	POSTING_READ(VIDSTART);

	rgvmodectl |= MEMMODE_SWMODE_EN;
	I915_WRITE(MEMMODECTL, rgvmodectl);

	if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
		DRM_ERROR("stuck trying to change perf mode\n");
	msleep(1);

	ironlake_set_drps(dev, fstart);

	dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
		I915_READ(0x112e0);
//   dev_priv->last_time1 = jiffies_to_msecs(jiffies);
	dev_priv->last_count2 = I915_READ(0x112f4);
//   getrawmonotonic(&dev_priv->last_time2);
}












static unsigned long intel_pxfreq(u32 vidfreq)
{
	unsigned long freq;
	int div = (vidfreq & 0x3f0000) >> 16;
	int post = (vidfreq & 0x3000) >> 12;
	int pre = (vidfreq & 0x7);

	if (!pre)
		return 0;

	freq = ((div * 133333) / ((1<<post) * pre));

	return freq;
}

void intel_init_emon(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 lcfuse;
	u8 pxw[16];
	int i;

	/* Disable to program */
	I915_WRITE(ECR, 0);
	POSTING_READ(ECR);

	/* Program energy weights for various events */
	I915_WRITE(SDEW, 0x15040d00);
	I915_WRITE(CSIEW0, 0x007f0000);
	I915_WRITE(CSIEW1, 0x1e220004);
	I915_WRITE(CSIEW2, 0x04000004);

	for (i = 0; i < 5; i++)
		I915_WRITE(PEW + (i * 4), 0);
	for (i = 0; i < 3; i++)
		I915_WRITE(DEW + (i * 4), 0);

	/* Program P-state weights to account for frequency power adjustment */
	for (i = 0; i < 16; i++) {
		u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
		unsigned long freq = intel_pxfreq(pxvidfreq);
		unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
			PXVFREQ_PX_SHIFT;
		unsigned long val;

		val = vid * vid;
		val *= (freq / 1000);
		val *= 255;
		val /= (127*127*900);
		if (val > 0xff)
			DRM_ERROR("bad pxval: %ld\n", val);
		pxw[i] = val;
	}
	/* Render standby states get 0 weight */
	pxw[14] = 0;
	pxw[15] = 0;

	for (i = 0; i < 4; i++) {
		u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
			(pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
		I915_WRITE(PXW + (i * 4), val);
	}

	/* Adjust magic regs to magic values (more experimental results) */
	I915_WRITE(OGW0, 0);
	I915_WRITE(OGW1, 0);
	I915_WRITE(EG0, 0x00007f00);
	I915_WRITE(EG1, 0x0000000e);
	I915_WRITE(EG2, 0x000e0000);
	I915_WRITE(EG3, 0x68000300);
	I915_WRITE(EG4, 0x42000000);
	I915_WRITE(EG5, 0x00140031);
	I915_WRITE(EG6, 0);
	I915_WRITE(EG7, 0);

	for (i = 0; i < 8; i++)
		I915_WRITE(PXWL + (i * 4), 0);

	/* Enable PMON + select events */
	I915_WRITE(ECR, 0x80000019);

	lcfuse = I915_READ(LCFUSE02);

	dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
}

static bool intel_enable_rc6(struct drm_device *dev)
{
	/*
	 * Respect the kernel parameter if it is set
	 */
	if (i915_enable_rc6 >= 0)
		return i915_enable_rc6;

	/*
	 * Disable RC6 on Ironlake
	 */
	if (INTEL_INFO(dev)->gen == 5)
		return 0;

	/*
	 * Disable rc6 on Sandybridge
	 */
	if (INTEL_INFO(dev)->gen == 6) {
		DRM_DEBUG_DRIVER("Sandybridge: RC6 disabled\n");
		return 0;
	}
	DRM_DEBUG_DRIVER("RC6 enabled\n");
	return 1;
}

void gen6_enable_rps(struct drm_i915_private *dev_priv)
{
	u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
	u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
	u32 pcu_mbox, rc6_mask = 0;
	int cur_freq, min_freq, max_freq;
	int i;

	/* Here begins a magic sequence of register writes to enable
	 * auto-downclocking.
	 *
	 * Perhaps there might be some value in exposing these to
	 * userspace...
	 */
	I915_WRITE(GEN6_RC_STATE, 0);
	mutex_lock(&dev_priv->dev->struct_mutex);
	gen6_gt_force_wake_get(dev_priv);

	/* disable the counters and set deterministic thresholds */
	I915_WRITE(GEN6_RC_CONTROL, 0);

	I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
	I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
	I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
	I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);

	for (i = 0; i < I915_NUM_RINGS; i++)
		I915_WRITE(RING_MAX_IDLE(dev_priv->ring[i].mmio_base), 10);

	I915_WRITE(GEN6_RC_SLEEP, 0);
	I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
	I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
	I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
	I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */

	if (intel_enable_rc6(dev_priv->dev))
		rc6_mask = GEN6_RC_CTL_RC6p_ENABLE |
			GEN6_RC_CTL_RC6_ENABLE;

	I915_WRITE(GEN6_RC_CONTROL,
		   rc6_mask |
		   GEN6_RC_CTL_EI_MODE(1) |
		   GEN6_RC_CTL_HW_ENABLE);

	I915_WRITE(GEN6_RPNSWREQ,
		   GEN6_FREQUENCY(10) |
		   GEN6_OFFSET(0) |
		   GEN6_AGGRESSIVE_TURBO);
	I915_WRITE(GEN6_RC_VIDEO_FREQ,
		   GEN6_FREQUENCY(12));

	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
		   18 << 24 |
		   6 << 16);
	I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
	I915_WRITE(GEN6_RP_UP_EI, 100000);
	I915_WRITE(GEN6_RP_DOWN_EI, 5000000);
	I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
	I915_WRITE(GEN6_RP_CONTROL,
		   GEN6_RP_MEDIA_TURBO |
		   GEN6_RP_MEDIA_HW_MODE |
		   GEN6_RP_MEDIA_IS_GFX |
		   GEN6_RP_ENABLE |
		   GEN6_RP_UP_BUSY_AVG |
		   GEN6_RP_DOWN_IDLE_CONT);

	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
		     500))
		DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");

	I915_WRITE(GEN6_PCODE_DATA, 0);
	I915_WRITE(GEN6_PCODE_MAILBOX,
		   GEN6_PCODE_READY |
		   GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
		     500))
		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");

	min_freq = (rp_state_cap & 0xff0000) >> 16;
	max_freq = rp_state_cap & 0xff;
	cur_freq = (gt_perf_status & 0xff00) >> 8;

	/* Check for overclock support */
	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
		     500))
		DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
	I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS);
	pcu_mbox = I915_READ(GEN6_PCODE_DATA);
	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
		     500))
		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
	if (pcu_mbox & (1<<31)) { /* OC supported */
		max_freq = pcu_mbox & 0xff;
		DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50);
	}

	/* In units of 100MHz */
	dev_priv->max_delay = max_freq;
	dev_priv->min_delay = min_freq;
	dev_priv->cur_delay = cur_freq;

	/* requires MSI enabled */
	I915_WRITE(GEN6_PMIER,
		   GEN6_PM_MBOX_EVENT |
		   GEN6_PM_THERMAL_EVENT |
		   GEN6_PM_RP_DOWN_TIMEOUT |
		   GEN6_PM_RP_UP_THRESHOLD |
		   GEN6_PM_RP_DOWN_THRESHOLD |
		   GEN6_PM_RP_UP_EI_EXPIRED |
		   GEN6_PM_RP_DOWN_EI_EXPIRED);
//   spin_lock_irq(&dev_priv->rps_lock);
//   WARN_ON(dev_priv->pm_iir != 0);
	I915_WRITE(GEN6_PMIMR, 0);
//   spin_unlock_irq(&dev_priv->rps_lock);
	/* enable all PM interrupts */
	I915_WRITE(GEN6_PMINTRMSK, 0);

	gen6_gt_force_wake_put(dev_priv);
	mutex_unlock(&dev_priv->dev->struct_mutex);
}

void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
{
	int min_freq = 15;
	int gpu_freq, ia_freq, max_ia_freq;
	int scaling_factor = 180;

//   max_ia_freq = cpufreq_quick_get_max(0);
	/*
	 * Default to measured freq if none found, PCU will ensure we don't go
	 * over
	 */
//   if (!max_ia_freq)
		max_ia_freq = 3000000; //tsc_khz;

	/* Convert from kHz to MHz */
	max_ia_freq /= 1000;

	mutex_lock(&dev_priv->dev->struct_mutex);

	/*
	 * For each potential GPU frequency, load a ring frequency we'd like
	 * to use for memory access.  We do this by specifying the IA frequency
	 * the PCU should use as a reference to determine the ring frequency.
	 */
	for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay;
	     gpu_freq--) {
		int diff = dev_priv->max_delay - gpu_freq;

		/*
		 * For GPU frequencies less than 750MHz, just use the lowest
		 * ring freq.
		 */
		if (gpu_freq < min_freq)
			ia_freq = 800;
		else
			ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
		ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);

		I915_WRITE(GEN6_PCODE_DATA,
			   (ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) |
			   gpu_freq);
		I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
			   GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
		if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) &
			      GEN6_PCODE_READY) == 0, 10)) {
			DRM_ERROR("pcode write of freq table timed out\n");
			continue;
		}
	}

	mutex_unlock(&dev_priv->dev->struct_mutex);
}

static void ironlake_init_clock_gating(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;
    uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;

    /* Required for FBC */
    dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE |
        DPFCRUNIT_CLOCK_GATE_DISABLE |
        DPFDUNIT_CLOCK_GATE_DISABLE;
    /* Required for CxSR */
    dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;

    I915_WRITE(PCH_3DCGDIS0,
           MARIUNIT_CLOCK_GATE_DISABLE |
           SVSMUNIT_CLOCK_GATE_DISABLE);
    I915_WRITE(PCH_3DCGDIS1,
           VFMUNIT_CLOCK_GATE_DISABLE);

    I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);

    /*
     * According to the spec the following bits should be set in
     * order to enable memory self-refresh
     * The bit 22/21 of 0x42004
     * The bit 5 of 0x42020
     * The bit 15 of 0x45000
     */
    I915_WRITE(ILK_DISPLAY_CHICKEN2,
           (I915_READ(ILK_DISPLAY_CHICKEN2) |
            ILK_DPARB_GATE | ILK_VSDPFD_FULL));
    I915_WRITE(ILK_DSPCLK_GATE,
           (I915_READ(ILK_DSPCLK_GATE) |
            ILK_DPARB_CLK_GATE));
    I915_WRITE(DISP_ARB_CTL,
           (I915_READ(DISP_ARB_CTL) |
            DISP_FBC_WM_DIS));
    I915_WRITE(WM3_LP_ILK, 0);
    I915_WRITE(WM2_LP_ILK, 0);
    I915_WRITE(WM1_LP_ILK, 0);

    /*
     * Based on the document from hardware guys the following bits
     * should be set unconditionally in order to enable FBC.
     * The bit 22 of 0x42000
     * The bit 22 of 0x42004
     * The bit 7,8,9 of 0x42020.
     */
    if (IS_IRONLAKE_M(dev)) {
        I915_WRITE(ILK_DISPLAY_CHICKEN1,
               I915_READ(ILK_DISPLAY_CHICKEN1) |
               ILK_FBCQ_DIS);
        I915_WRITE(ILK_DISPLAY_CHICKEN2,
               I915_READ(ILK_DISPLAY_CHICKEN2) |
               ILK_DPARB_GATE);
        I915_WRITE(ILK_DSPCLK_GATE,
               I915_READ(ILK_DSPCLK_GATE) |
               ILK_DPFC_DIS1 |
               ILK_DPFC_DIS2 |
               ILK_CLK_FBC);
    }

    I915_WRITE(ILK_DISPLAY_CHICKEN2,
           I915_READ(ILK_DISPLAY_CHICKEN2) |
           ILK_ELPIN_409_SELECT);
    I915_WRITE(_3D_CHICKEN2,
           _3D_CHICKEN2_WM_READ_PIPELINED << 16 |
           _3D_CHICKEN2_WM_READ_PIPELINED);
}

static void gen6_init_clock_gating(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int pipe;
	uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;

	I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);

	I915_WRITE(ILK_DISPLAY_CHICKEN2,
		   I915_READ(ILK_DISPLAY_CHICKEN2) |
		   ILK_ELPIN_409_SELECT);

	I915_WRITE(WM3_LP_ILK, 0);
	I915_WRITE(WM2_LP_ILK, 0);
	I915_WRITE(WM1_LP_ILK, 0);

	/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
	 * gating disable must be set.  Failure to set it results in
	 * flickering pixels due to Z write ordering failures after
	 * some amount of runtime in the Mesa "fire" demo, and Unigine
	 * Sanctuary and Tropics, and apparently anything else with
	 * alpha test or pixel discard.
	 *
	 * According to the spec, bit 11 (RCCUNIT) must also be set,
	 * but we didn't debug actual testcases to find it out.
	 */
	I915_WRITE(GEN6_UCGCTL2,
		   GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);

	/*
	 * According to the spec the following bits should be
	 * set in order to enable memory self-refresh and fbc:
	 * The bit21 and bit22 of 0x42000
	 * The bit21 and bit22 of 0x42004
	 * The bit5 and bit7 of 0x42020
	 * The bit14 of 0x70180
	 * The bit14 of 0x71180
	 */
	I915_WRITE(ILK_DISPLAY_CHICKEN1,
		   I915_READ(ILK_DISPLAY_CHICKEN1) |
		   ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
	I915_WRITE(ILK_DISPLAY_CHICKEN2,
		   I915_READ(ILK_DISPLAY_CHICKEN2) |
		   ILK_DPARB_GATE | ILK_VSDPFD_FULL);
	I915_WRITE(ILK_DSPCLK_GATE,
		   I915_READ(ILK_DSPCLK_GATE) |
		   ILK_DPARB_CLK_GATE  |
		   ILK_DPFD_CLK_GATE);

	for_each_pipe(pipe) {
		I915_WRITE(DSPCNTR(pipe),
			   I915_READ(DSPCNTR(pipe)) |
			   DISPPLANE_TRICKLE_FEED_DISABLE);
		intel_flush_display_plane(dev_priv, pipe);
	}
}

static void ivybridge_init_clock_gating(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int pipe;
	uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;

	I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);

	I915_WRITE(WM3_LP_ILK, 0);
	I915_WRITE(WM2_LP_ILK, 0);
	I915_WRITE(WM1_LP_ILK, 0);

	I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);

	I915_WRITE(IVB_CHICKEN3,
		   CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
		   CHICKEN3_DGMG_DONE_FIX_DISABLE);

	for_each_pipe(pipe) {
		I915_WRITE(DSPCNTR(pipe),
			   I915_READ(DSPCNTR(pipe)) |
			   DISPPLANE_TRICKLE_FEED_DISABLE);
		intel_flush_display_plane(dev_priv, pipe);
	}
}

static void g4x_init_clock_gating(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;
    uint32_t dspclk_gate;

    I915_WRITE(RENCLK_GATE_D1, 0);
    I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
           GS_UNIT_CLOCK_GATE_DISABLE |
           CL_UNIT_CLOCK_GATE_DISABLE);
    I915_WRITE(RAMCLK_GATE_D, 0);
    dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
        OVRUNIT_CLOCK_GATE_DISABLE |
        OVCUNIT_CLOCK_GATE_DISABLE;
    if (IS_GM45(dev))
        dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
    I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
}

static void crestline_init_clock_gating(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
	I915_WRITE(RENCLK_GATE_D2, 0);
	I915_WRITE(DSPCLK_GATE_D, 0);
	I915_WRITE(RAMCLK_GATE_D, 0);
	I915_WRITE16(DEUC, 0);
}

static void broadwater_init_clock_gating(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
		   I965_RCC_CLOCK_GATE_DISABLE |
		   I965_RCPB_CLOCK_GATE_DISABLE |
		   I965_ISC_CLOCK_GATE_DISABLE |
		   I965_FBC_CLOCK_GATE_DISABLE);
	I915_WRITE(RENCLK_GATE_D2, 0);
}

static void gen3_init_clock_gating(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;
    u32 dstate = I915_READ(D_STATE);

    dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
        DSTATE_DOT_CLOCK_GATING;
    I915_WRITE(D_STATE, dstate);
}

static void i85x_init_clock_gating(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
}

static void i830_init_clock_gating(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
}

static void ibx_init_clock_gating(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;

    /*
     * On Ibex Peak and Cougar Point, we need to disable clock
     * gating for the panel power sequencer or it will fail to
     * start up when no ports are active.
     */
    I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
}

static void cpt_init_clock_gating(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;
    int pipe;

    /*
     * On Ibex Peak and Cougar Point, we need to disable clock
     * gating for the panel power sequencer or it will fail to
     * start up when no ports are active.
     */
    I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
    I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
           DPLS_EDP_PPS_FIX_DIS);
    /* Without this, mode sets may fail silently on FDI */
    for_each_pipe(pipe)
        I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS);
}

static void ironlake_teardown_rc6(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	if (dev_priv->renderctx) {
//		i915_gem_object_unpin(dev_priv->renderctx);
//		drm_gem_object_unreference(&dev_priv->renderctx->base);
		dev_priv->renderctx = NULL;
	}

	if (dev_priv->pwrctx) {
//		i915_gem_object_unpin(dev_priv->pwrctx);
//		drm_gem_object_unreference(&dev_priv->pwrctx->base);
		dev_priv->pwrctx = NULL;
	}
}

static void ironlake_disable_rc6(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	if (I915_READ(PWRCTXA)) {
		/* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
		I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
		wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON),
			 50);

		I915_WRITE(PWRCTXA, 0);
		POSTING_READ(PWRCTXA);

		I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
		POSTING_READ(RSTDBYCTL);
	}

	ironlake_teardown_rc6(dev);
}

static int ironlake_setup_rc6(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	if (dev_priv->renderctx == NULL)
//		dev_priv->renderctx = intel_alloc_context_page(dev);
	if (!dev_priv->renderctx)
		return -ENOMEM;

	if (dev_priv->pwrctx == NULL)
//		dev_priv->pwrctx = intel_alloc_context_page(dev);
	if (!dev_priv->pwrctx) {
		ironlake_teardown_rc6(dev);
		return -ENOMEM;
	}

	return 0;
}

void ironlake_enable_rc6(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int ret;

	/* rc6 disabled by default due to repeated reports of hanging during
	 * boot and resume.
	 */
	if (!intel_enable_rc6(dev))
		return;

	mutex_lock(&dev->struct_mutex);
	ret = ironlake_setup_rc6(dev);
	if (ret) {
		mutex_unlock(&dev->struct_mutex);
		return;
	}

	/*
	 * GPU can automatically power down the render unit if given a page
	 * to save state.
	 */
#if 0
	ret = BEGIN_LP_RING(6);
	if (ret) {
		ironlake_teardown_rc6(dev);
		mutex_unlock(&dev->struct_mutex);
		return;
	}

	OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
	OUT_RING(MI_SET_CONTEXT);
	OUT_RING(dev_priv->renderctx->gtt_offset |
		 MI_MM_SPACE_GTT |
		 MI_SAVE_EXT_STATE_EN |
		 MI_RESTORE_EXT_STATE_EN |
		 MI_RESTORE_INHIBIT);
	OUT_RING(MI_SUSPEND_FLUSH);
	OUT_RING(MI_NOOP);
	OUT_RING(MI_FLUSH);
	ADVANCE_LP_RING();

	/*
	 * Wait for the command parser to advance past MI_SET_CONTEXT. The HW
	 * does an implicit flush, combined with MI_FLUSH above, it should be
	 * safe to assume that renderctx is valid
	 */
	ret = intel_wait_ring_idle(LP_RING(dev_priv));
	if (ret) {
		DRM_ERROR("failed to enable ironlake power power savings\n");
		ironlake_teardown_rc6(dev);
		mutex_unlock(&dev->struct_mutex);
		return;
	}
#endif

	I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
	I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
	mutex_unlock(&dev->struct_mutex);
}

void intel_init_clock_gating(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	dev_priv->display.init_clock_gating(dev);

	if (dev_priv->display.init_pch_clock_gating)
		dev_priv->display.init_pch_clock_gating(dev);
}

/* Set up chip specific display functions */
static void intel_init_display(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;

    /* We always want a DPMS function */
    if (HAS_PCH_SPLIT(dev)) {
        dev_priv->display.dpms = ironlake_crtc_dpms;
        dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
        dev_priv->display.update_plane = ironlake_update_plane;
    } else {
        dev_priv->display.dpms = i9xx_crtc_dpms;
        dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
        dev_priv->display.update_plane = i9xx_update_plane;
    }

    if (I915_HAS_FBC(dev)) {
        if (HAS_PCH_SPLIT(dev)) {
            dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
            dev_priv->display.enable_fbc = ironlake_enable_fbc;
            dev_priv->display.disable_fbc = ironlake_disable_fbc;
        } else if (IS_GM45(dev)) {
            dev_priv->display.fbc_enabled = g4x_fbc_enabled;
            dev_priv->display.enable_fbc = g4x_enable_fbc;
            dev_priv->display.disable_fbc = g4x_disable_fbc;
        } else if (IS_CRESTLINE(dev)) {
            dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
            dev_priv->display.enable_fbc = i8xx_enable_fbc;
            dev_priv->display.disable_fbc = i8xx_disable_fbc;
        }
        /* 855GM needs testing */
    }

    /* Returns the core display clock speed */
	if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
        dev_priv->display.get_display_clock_speed =
            i945_get_display_clock_speed;
    else if (IS_I915G(dev))
        dev_priv->display.get_display_clock_speed =
            i915_get_display_clock_speed;
    else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
        dev_priv->display.get_display_clock_speed =
            i9xx_misc_get_display_clock_speed;
    else if (IS_I915GM(dev))
        dev_priv->display.get_display_clock_speed =
            i915gm_get_display_clock_speed;
    else if (IS_I865G(dev))
        dev_priv->display.get_display_clock_speed =
            i865_get_display_clock_speed;
    else if (IS_I85X(dev))
        dev_priv->display.get_display_clock_speed =
            i855_get_display_clock_speed;
    else /* 852, 830 */
        dev_priv->display.get_display_clock_speed =
            i830_get_display_clock_speed;

    /* For FIFO watermark updates */
    if (HAS_PCH_SPLIT(dev)) {
		dev_priv->display.force_wake_get = __gen6_gt_force_wake_get;
		dev_priv->display.force_wake_put = __gen6_gt_force_wake_put;

		/* IVB configs may use multi-threaded forcewake */
		if (IS_IVYBRIDGE(dev)) {
			u32	ecobus;

			/* A small trick here - if the bios hasn't configured MT forcewake,
			 * and if the device is in RC6, then force_wake_mt_get will not wake
			 * the device and the ECOBUS read will return zero. Which will be
			 * (correctly) interpreted by the test below as MT forcewake being
			 * disabled.
			 */
			mutex_lock(&dev->struct_mutex);
			__gen6_gt_force_wake_mt_get(dev_priv);
			ecobus = I915_READ_NOTRACE(ECOBUS);
			__gen6_gt_force_wake_mt_put(dev_priv);
			mutex_unlock(&dev->struct_mutex);

			if (ecobus & FORCEWAKE_MT_ENABLE) {
				DRM_DEBUG_KMS("Using MT version of forcewake\n");
				dev_priv->display.force_wake_get =
					__gen6_gt_force_wake_mt_get;
				dev_priv->display.force_wake_put =
					__gen6_gt_force_wake_mt_put;
			}
		}

        if (HAS_PCH_IBX(dev))
            dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating;
        else if (HAS_PCH_CPT(dev))
            dev_priv->display.init_pch_clock_gating = cpt_init_clock_gating;

        if (IS_GEN5(dev)) {
            if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK)
                dev_priv->display.update_wm = ironlake_update_wm;
            else {
                DRM_DEBUG_KMS("Failed to get proper latency. "
                          "Disable CxSR\n");
                dev_priv->display.update_wm = NULL;
            }
            dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
            dev_priv->display.init_clock_gating = ironlake_init_clock_gating;
			dev_priv->display.write_eld = ironlake_write_eld;
        } else if (IS_GEN6(dev)) {
            if (SNB_READ_WM0_LATENCY()) {
                dev_priv->display.update_wm = sandybridge_update_wm;
				dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
            } else {
                DRM_DEBUG_KMS("Failed to read display plane latency. "
                          "Disable CxSR\n");
                dev_priv->display.update_wm = NULL;
            }
            dev_priv->display.fdi_link_train = gen6_fdi_link_train;
            dev_priv->display.init_clock_gating = gen6_init_clock_gating;
			dev_priv->display.write_eld = ironlake_write_eld;
        } else if (IS_IVYBRIDGE(dev)) {
            /* FIXME: detect B0+ stepping and use auto training */
            dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
            if (SNB_READ_WM0_LATENCY()) {
                dev_priv->display.update_wm = sandybridge_update_wm;
				dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
            } else {
                DRM_DEBUG_KMS("Failed to read display plane latency. "
                          "Disable CxSR\n");
                dev_priv->display.update_wm = NULL;
            }
            dev_priv->display.init_clock_gating = ivybridge_init_clock_gating;
			dev_priv->display.write_eld = ironlake_write_eld;
        } else
            dev_priv->display.update_wm = NULL;
    } else if (IS_PINEVIEW(dev)) {
        if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
                        dev_priv->is_ddr3,
                        dev_priv->fsb_freq,
                        dev_priv->mem_freq)) {
            DRM_INFO("failed to find known CxSR latency "
                 "(found ddr%s fsb freq %d, mem freq %d), "
                 "disabling CxSR\n",
				 (dev_priv->is_ddr3 == 1) ? "3" : "2",
                 dev_priv->fsb_freq, dev_priv->mem_freq);
            /* Disable CxSR and never update its watermark again */
            pineview_disable_cxsr(dev);
            dev_priv->display.update_wm = NULL;
        } else
            dev_priv->display.update_wm = pineview_update_wm;
        dev_priv->display.init_clock_gating = gen3_init_clock_gating;
    } else if (IS_G4X(dev)) {
		dev_priv->display.write_eld = g4x_write_eld;
        dev_priv->display.update_wm = g4x_update_wm;
        dev_priv->display.init_clock_gating = g4x_init_clock_gating;
    } else if (IS_GEN4(dev)) {
        dev_priv->display.update_wm = i965_update_wm;
        if (IS_CRESTLINE(dev))
            dev_priv->display.init_clock_gating = crestline_init_clock_gating;
        else if (IS_BROADWATER(dev))
            dev_priv->display.init_clock_gating = broadwater_init_clock_gating;
    } else if (IS_GEN3(dev)) {
        dev_priv->display.update_wm = i9xx_update_wm;
        dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
        dev_priv->display.init_clock_gating = gen3_init_clock_gating;
    } else if (IS_I865G(dev)) {
        dev_priv->display.update_wm = i830_update_wm;
        dev_priv->display.init_clock_gating = i85x_init_clock_gating;
        dev_priv->display.get_fifo_size = i830_get_fifo_size;
    } else if (IS_I85X(dev)) {
        dev_priv->display.update_wm = i9xx_update_wm;
        dev_priv->display.get_fifo_size = i85x_get_fifo_size;
        dev_priv->display.init_clock_gating = i85x_init_clock_gating;
    } else {
        dev_priv->display.update_wm = i830_update_wm;
        dev_priv->display.init_clock_gating = i830_init_clock_gating;
        if (IS_845G(dev))
            dev_priv->display.get_fifo_size = i845_get_fifo_size;
        else
            dev_priv->display.get_fifo_size = i830_get_fifo_size;
    }

    /* Default just returns -ENODEV to indicate unsupported */
//    dev_priv->display.queue_flip = intel_default_queue_flip;

#if 0
    switch (INTEL_INFO(dev)->gen) {
    case 2:
        dev_priv->display.queue_flip = intel_gen2_queue_flip;
        break;

    case 3:
        dev_priv->display.queue_flip = intel_gen3_queue_flip;
        break;

    case 4:
    case 5:
        dev_priv->display.queue_flip = intel_gen4_queue_flip;
        break;

    case 6:
        dev_priv->display.queue_flip = intel_gen6_queue_flip;
        break;
    case 7:
        dev_priv->display.queue_flip = intel_gen7_queue_flip;
        break;
    }
#endif
}

/*
 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
 * resume, or other times.  This quirk makes sure that's the case for
 * affected systems.
 */
static void quirk_pipea_force(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;

    dev_priv->quirks |= QUIRK_PIPEA_FORCE;
    DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
}

/*
 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
 */
static void quirk_ssc_force_disable(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;
    dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
}

struct intel_quirk {
    int device;
    int subsystem_vendor;
    int subsystem_device;
    void (*hook)(struct drm_device *dev);
};

struct intel_quirk intel_quirks[] = {
    /* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */
    { 0x2a42, 0x103c, 0x30eb, quirk_pipea_force },
    /* HP Mini needs pipe A force quirk (LP: #322104) */
	{ 0x27ae, 0x103c, 0x361a, quirk_pipea_force },

    /* Thinkpad R31 needs pipe A force quirk */
    { 0x3577, 0x1014, 0x0505, quirk_pipea_force },
    /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
    { 0x2592, 0x1179, 0x0001, quirk_pipea_force },

    /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
    { 0x3577,  0x1014, 0x0513, quirk_pipea_force },
    /* ThinkPad X40 needs pipe A force quirk */

    /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
    { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },

    /* 855 & before need to leave pipe A & dpll A up */
    { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
    { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },

    /* Lenovo U160 cannot use SSC on LVDS */
    { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },

    /* Sony Vaio Y cannot use SSC on LVDS */
    { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
};

static void intel_init_quirks(struct drm_device *dev)
{
    struct pci_dev *d = dev->pdev;
    int i;

    for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
        struct intel_quirk *q = &intel_quirks[i];

        if (d->device == q->device &&
            (d->subsystem_vendor == q->subsystem_vendor ||
             q->subsystem_vendor == PCI_ANY_ID) &&
            (d->subsystem_device == q->subsystem_device ||
             q->subsystem_device == PCI_ANY_ID))
            q->hook(dev);
    }
}

/* Disable the VGA plane that we never use */
static void i915_disable_vga(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u8 sr1;
	u32 vga_reg;

	if (HAS_PCH_SPLIT(dev))
		vga_reg = CPU_VGACNTRL;
	else
		vga_reg = VGACNTRL;

//	vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
    out8(VGA_SR_INDEX, 1);
    sr1 = in8(VGA_SR_DATA);
    out8(VGA_SR_DATA,sr1 | 1<<5);
//   vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
	udelay(300);

	I915_WRITE(vga_reg, VGA_DISP_DISABLE);
	POSTING_READ(vga_reg);
}

void intel_modeset_init(struct drm_device *dev)
{
    struct drm_i915_private *dev_priv = dev->dev_private;
	int i, ret;

    drm_mode_config_init(dev);

    dev->mode_config.min_width = 0;
    dev->mode_config.min_height = 0;

    dev->mode_config.funcs = (void *)&intel_mode_funcs;

    intel_init_quirks(dev);

    intel_init_display(dev);

    if (IS_GEN2(dev)) {
        dev->mode_config.max_width = 2048;
        dev->mode_config.max_height = 2048;
    } else if (IS_GEN3(dev)) {
        dev->mode_config.max_width = 4096;
        dev->mode_config.max_height = 4096;
    } else {
        dev->mode_config.max_width = 8192;
        dev->mode_config.max_height = 8192;
    }
    dev->mode_config.fb_base = get_bus_addr();

    DRM_DEBUG_KMS("%d display pipe%s available.\n",
              dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");

    for (i = 0; i < dev_priv->num_pipe; i++) {
        intel_crtc_init(dev, i);
		ret = intel_plane_init(dev, i);
		if (ret)
			DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
    }

    /* Just disable it once at startup */
    i915_disable_vga(dev);
    intel_setup_outputs(dev);

    intel_init_clock_gating(dev);

    if (IS_IRONLAKE_M(dev)) {
        ironlake_enable_drps(dev);
        intel_init_emon(dev);
    }

    if (IS_GEN6(dev) || IS_GEN7(dev)) {
        gen6_enable_rps(dev_priv);
        gen6_update_ring_freq(dev_priv);
    }

//   INIT_WORK(&dev_priv->idle_work, intel_idle_update);
//   setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
//           (unsigned long)dev);
}

void intel_modeset_gem_init(struct drm_device *dev)
{
	if (IS_IRONLAKE_M(dev))
		ironlake_enable_rc6(dev);

//	intel_setup_overlay(dev);
}


/*
 * Return which encoder is currently attached for connector.
 */
struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
{
	return &intel_attached_encoder(connector)->base;
}

void intel_connector_attach_encoder(struct intel_connector *connector,
				    struct intel_encoder *encoder)
{
	connector->encoder = encoder;
	drm_mode_connector_attach_encoder(&connector->base,
					  &encoder->base);
}