arnavbhatt288/kolibrios
1
0
Fork 0
forked from KolibriOS/kolibrios
Code Pull Requests Activity

PHY and link detection for PCnet32 driver (no watchdog yet), added general mii code for ethernet drivers.

Browse Source 
git-svn-id: svn://kolibrios.org@3350 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
hidnplayr 2013-03-07 20:36:32 +00:00
parent e4513c6c12
commit c101fd199a
3 changed files with 277 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

162
kernel/branches/net/drivers/bus/mii.inc Normal file
View File

@ -0,0 +1,162 @@
; Generic MII registers.
MII_BMCR = 0x00 ; Basic mode control register
MII_BMSR = 0x01 ; Basic mode status register
MII_PHYSID1 = 0x02 ; PHYS ID 1
MII_PHYSID2 = 0x03 ; PHYS ID 2
MII_ADVERTISE = 0x04 ; Advertisement control reg
MII_LPA = 0x05 ; Link partner ability reg
MII_EXPANSION = 0x06 ; Expansion register
MII_CTRL1000 = 0x09 ; 1000BASE-T control
MII_STAT1000 = 0x0a ; 1000BASE-T status
MII_ESTATUS = 0x0f ; Extended Status
MII_DCOUNTER = 0x12 ; Disconnect counter
MII_FCSCOUNTER = 0x13 ; False carrier counter
MII_NWAYTEST = 0x14 ; N-way auto-neg test reg
MII_RERRCOUNTER = 0x15 ; Receive error counter
MII_SREVISION = 0x16 ; Silicon revision
MII_RESV1 = 0x17 ; Reserved...
MII_LBRERROR = 0x18 ; Lpback, rx, bypass error
MII_PHYADDR = 0x19 ; PHY address
MII_RESV2 = 0x1a ; Reserved...
MII_TPISTATUS = 0x1b ; TPI status for 10mbps
MII_NCONFIG = 0x1c ; Network interface config
; Basic mode control register.
BMCR_RESV = 0x003f ; Unused...
BMCR_SPEED1000 = 0x0040 ; MSB of Speed (1000)
BMCR_CTST = 0x0080 ; Collision test
BMCR_FULLDPLX = 0x0100 ; Full duplex
BMCR_ANRESTART = 0x0200 ; Auto negotiation restart
BMCR_ISOLATE = 0x0400 ; Disconnect DP83840 from MII
BMCR_PDOWN = 0x0800 ; Powerdown the DP83840
BMCR_ANENABLE = 0x1000 ; Enable auto negotiation
BMCR_SPEED100 = 0x2000 ; Select 100Mbps
BMCR_LOOPBACK = 0x4000 ; TXD loopback bits
BMCR_RESET = 0x8000 ; Reset the DP83840
; Basic mode status register.
BMSR_ERCAP = 0x0001 ; Ext-reg capability
BMSR_JCD = 0x0002 ; Jabber detected
BMSR_LSTATUS = 0x0004 ; Link status
BMSR_ANEGCAPABLE = 0x0008 ; Able to do auto-negotiation
BMSR_RFAULT = 0x0010 ; Remote fault detected
BMSR_ANEGCOMPLETE = 0x0020 ; Auto-negotiation complete
BMSR_RESV = 0x00c0 ; Unused...
BMSR_ESTATEN = 0x0100 ; Extended Status in R15
BMSR_100HALF2 = 0x0200 ; Can do 100BASE-T2 HDX
BMSR_100FULL2 = 0x0400 ; Can do 100BASE-T2 FDX
BMSR_10HALF = 0x0800 ; Can do 10mbps, half-duplex
BMSR_10FULL = 0x1000 ; Can do 10mbps, full-duplex
BMSR_100HALF = 0x2000 ; Can do 100mbps, half-duplex
BMSR_100FULL = 0x4000 ; Can do 100mbps, full-duplex
BMSR_100BASE4 = 0x8000 ; Can do 100mbps, 4k packets
; Advertisement control register.
ADVERTISE_SLCT = 0x001f ; Selector bits
ADVERTISE_CSMA = 0x0001 ; Only selector supported
ADVERTISE_10HALF = 0x0020 ; Try for 10mbps half-duplex
ADVERTISE_1000XFULL = 0x0020 ; Try for 1000BASE-X full-duplex
ADVERTISE_10FULL = 0x0040 ; Try for 10mbps full-duplex
ADVERTISE_1000XHALF = 0x0040 ; Try for 1000BASE-X half-duplex
ADVERTISE_100HALF = 0x0080 ; Try for 100mbps half-duplex
ADVERTISE_1000XPAUSE = 0x0080 ; Try for 1000BASE-X pause
ADVERTISE_100FULL = 0x0100 ; Try for 100mbps full-duplex
ADVERTISE_1000XPSE_ASYM = 0x0100 ; Try for 1000BASE-X asym pause
ADVERTISE_100BASE4 = 0x0200 ; Try for 100mbps 4k packets
ADVERTISE_PAUSE_CAP = 0x0400 ; Try for pause
ADVERTISE_PAUSE_ASYM = 0x0800 ; Try for asymetric pause
ADVERTISE_RESV = 0x1000 ; Unused...
ADVERTISE_RFAULT = 0x2000 ; Say we can detect faults
ADVERTISE_LPACK = 0x4000 ; Ack link partners response
ADVERTISE_NPAGE = 0x8000 ; Next page bit
ADVERTISE_FULL = (ADVERTISE_100FULL or ADVERTISE_10FULL or ADVERTISE_CSMA)
ADVERTISE_ALL = (ADVERTISE_10HALF or ADVERTISE_10FULL or ADVERTISE_100HALF or ADVERTISE_100FULL)
; Link partner ability register.
LPA_SLCT = 0x001f ; Same as advertise selector
LPA_10HALF = 0x0020 ; Can do 10mbps half-duplex
LPA_1000XFULL = 0x0020 ; Can do 1000BASE-X full-duplex
LPA_10FULL = 0x0040 ; Can do 10mbps full-duplex
LPA_1000XHALF = 0x0040 ; Can do 1000BASE-X half-duplex
LPA_100HALF = 0x0080 ; Can do 100mbps half-duplex
LPA_1000XPAUSE = 0x0080 ; Can do 1000BASE-X pause
LPA_100FULL = 0x0100 ; Can do 100mbps full-duplex
LPA_1000XPAUSE_ASYM = 0x0100 ; Can do 1000BASE-X pause asym
LPA_100BASE4 = 0x0200 ; Can do 100mbps 4k packets
LPA_PAUSE_CAP = 0x0400 ; Can pause
LPA_PAUSE_ASYM = 0x0800 ; Can pause asymetrically
LPA_RESV = 0x1000 ; Unused...
LPA_RFAULT = 0x2000 ; Link partner faulted
LPA_LPACK = 0x4000 ; Link partner acked us
LPA_NPAGE = 0x8000 ; Next page bit
LPA_DUPLEX = (LPA_10FULL or LPA_100FULL)
LPA_100 = (LPA_100FULL or LPA_100HALF or LPA_100BASE4)
; Expansion register for auto-negotiation.
EXPANSION_NWAY = 0x0001 ; Can do N-way auto-nego
EXPANSION_LCWP = 0x0002 ; Got new RX page code word
EXPANSION_ENABLENPAGE = 0x0004 ; This enables npage words
EXPANSION_NPCAPABLE = 0x0008 ; Link partner supports npage
EXPANSION_MFAULTS = 0x0010 ; Multiple faults detected
EXPANSION_RESV = 0xffe0 ; Unused...
ESTATUS_1000_TFULL = 0x2000 ; Can do 1000BT Full
ESTATUS_1000_THALF = 0x1000 ; Can do 1000BT Half
; N-way test register.
NWAYTEST_RESV1 = 0x00ff ; Unused...
NWAYTEST_LOOPBACK = 0x0100 ; Enable loopback for N-way
NWAYTEST_RESV2 = 0xfe00 ; Unused...
; 1000BASE-T Control register
ADVERTISE_1000FULL = 0x0200 ; Advertise 1000BASE-T full duplex
ADVERTISE_1000HALF = 0x0100 ; Advertise 1000BASE-T half duplex
; 1000BASE-T Status register
LPA_1000LOCALRXOK = 0x2000 ; Link partner local receiver status
LPA_1000REMRXOK = 0x1000 ; Link partner remote receiver status
LPA_1000FULL = 0x0800 ; Link partner 1000BASE-T full duplex
LPA_1000HALF = 0x0400 ; Link partner 1000BASE-T half duplex
; Flow control flags
FLOW_CTRL_TX = 0x01
FLOW_CTRL_RX = 0x02
if defined mdio_read
align 4
mii_link_ok:
DEBUGF 1, "mii_link_ok\n"
; First do a dummy read to latch some MII phys
mov ecx, MII_BMSR
call mdio_read
mov ecx, MII_BMSR
call mdio_read
DEBUGF 1, "eax=0x%x\n", eax
and eax, BMSR_LSTATUS
DEBUGF 1, "link status=0x%x\n", eax
ret
end if

1
kernel/branches/net/drivers/netdrv.inc
View File

@ -9,6 +9,7 @@
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
include 'bus/pci.inc'
include 'bus/mii.inc'
; Kernel variables

114
kernel/branches/net/drivers/pcnet32.asm
View File

@ -277,6 +277,10 @@ public version
TXCTL_MBO = 0x0000F000
TXCTL_BUFSZ = 0x00000FFF
;
MAX_PHYS = 32
virtual at ebx
@ -319,6 +323,8 @@ virtual at ebx
.pci_bus dd ?
.pci_dev dd ?
.phy dw ?
.read_csr dd ?
.write_csr dd ?
.read_bcr dd ?
@ -816,6 +822,57 @@ reset:
mov dword [device.filter], -1
mov dword [device.filter+4], -1
;-----------------------------
test [device.mii], 1
jz .no_mii
mov [device.phy], 0
.mii_loop:
mov ecx, MII_PHYSID1
call mdio_read
cmp ax, 0xffff
je .next
DEBUGF 1, "0x%x\n", ax
mov ecx, MII_PHYSID2
call mdio_read
cmp ax, 0xffff
je .next
DEBUGF 1, "0x%x\n", ax
jmp .got_phy
cmp [device.phy], 31
jne .next
mov ax, [device.chip_version]
inc ax
and ax, 0xfffe
cmp ax, 0x2624 ; 79c971 & 79c972 have phantom phy at id 31
je .got_phy
.next:
inc [device.phy]
cmp [device.phy], MAX_PHYS
jb .mii_loop
DEBUGF 1, "No PHY found!\n"
or eax, -1
ret
.got_phy:
DEBUGF 1, "Found PHY at 0x%x\n", [device.phy]:4
.no_mii:
;-----------------------------------------------
call read_mac
lea esi, [device.mac]
@ -875,6 +932,8 @@ reset:
; get link status
mov [device.state], ETH_LINK_UNKOWN
call check_media
DEBUGF 1,"reset complete\n"
xor eax, eax
ret
@ -1414,6 +1473,61 @@ dwio_reset:
ret
align 4
mdio_read:
and ecx, 0x1f
mov ax, [device.phy]
and ax, 0x1f
shl ax, 5
or ax, cx
mov ecx, BCR_MIIADDR
call [device.write_bcr]
mov ecx, BCR_MIIDATA
call [device.read_bcr]
ret
align 4
mdio_write:
push eax
and ecx, 0x1f
mov ax, [device.phy]
and ax, 0x1f
shl ax, 5
or ax, cx
mov ecx, BCR_MIIADDR
call [device.write_bcr]
pop eax
mov ecx, BCR_MIIDATA
call [device.write_bcr]
ret
align 4
check_media:
DEBUGF 1, "check_media\n"
test [device.mii], 1
jnz mii_link_ok
mov ecx, BCR_LED0
call [device.read_bcr]
cmp eax, 0xc0
DEBUGF 1, "link status=0x%x\n", eax
ret
; End of code