kolibrios/kernel/trunk/core/sys32.inc
CleverMouse 30b17fb697 allow high-priority threads to wakeup after any IRQ, not just timer
git-svn-id: svn://kolibrios.org@3615 a494cfbc-eb01-0410-851d-a64ba20cac60
2013-06-07 16:46:52 +00:00

771 lines
22 KiB
PHP
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2011. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; ;;
;; MenuetOS process management, protected ring3 ;;
;; ;;
;; Distributed under GPL. See file COPYING for details. ;;
;; Copyright 2003 Ville Turjanmaa ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
align 4 ;3A08
build_interrupt_table:
mov edi, idts
mov esi, sys_int
mov ecx, 0x40
mov eax, (10001110b shl 24) + os_code
@@:
movsw ;low word of code-entry
stosd ;interrupt gate type : os_code selector
movsw ;high word of code-entry
loop @b
movsd ;copy low dword of trap gate for int 0x40
movsd ;copy high dword of trap gate for int 0x40
lidt [esi]
ret
iglobal
align 4
sys_int:
;exception handlers addresses (for interrupt gate construction)
dd e0,e1,e2,e3,e4,e5,e6,except_7 ; SEE: core/fpu.inc
dd e8,e9,e10,e11,e12,e13,page_fault_exc,e15
dd e16, e17,e18, e19
times 12 dd unknown_interrupt ;int_20..int_31
;interrupt handlers addresses (for interrupt gate construction)
; 0x20 .. 0x2F - IRQ handlers
dd irq0, irq_serv.irq_1, irq_serv.irq_2
dd irq_serv.irq_3, irq_serv.irq_4
dd irq_serv.irq_5, irq_serv.irq_6, irq_serv.irq_7
dd irq_serv.irq_8, irq_serv.irq_9, irq_serv.irq_10
dd irq_serv.irq_11, irq_serv.irq_12, irqD, irq_serv.irq_14, irq_serv.irq_15
dd irq_serv.irq_16
dd irq_serv.irq_17
dd irq_serv.irq_18
dd irq_serv.irq_19
dd irq_serv.irq_20
dd irq_serv.irq_21
dd irq_serv.irq_22
dd irq_serv.irq_23
times 32 - IRQ_RESERVED dd unknown_interrupt
;int_0x40 gate trap (for directly copied)
dw i40 and 0xFFFF, os_code, 11101111b shl 8, i40 shr 16
idtreg: ; data for LIDT instruction (!!! must be immediately below sys_int data)
dw 2*($-sys_int-4)-1
dd idts ;0x8000B100
dw 0 ;просто выравнивание
msg_fault_sel dd msg_exc_8,msg_exc_u,msg_exc_a,msg_exc_b
dd msg_exc_c,msg_exc_d,msg_exc_e
msg_exc_8 db "Double fault", 0
msg_exc_u db "Undefined Exception", 0
msg_exc_a db "Invalid TSS", 0
msg_exc_b db "Segment not present", 0
msg_exc_c db "Stack fault", 0
msg_exc_d db "General protection fault", 0
msg_exc_e db "Page fault", 0
if lang eq sp
include 'core/sys32-sp.inc'
else
msg_sel_ker db "kernel", 0
msg_sel_app db "application", 0
end if
endg
macro save_ring3_context {
pushad
}
macro restore_ring3_context {
popad
}
macro exc_wo_code [num] {
e#num :
save_ring3_context
mov bl, num
jmp exc_c
} exc_wo_code 0,1,2,3,4,5,6,15,16,19
macro exc_w_code [num] {
e#num :
add esp, 4
save_ring3_context
mov bl, num
jmp exc_c
} exc_w_code 8,9,10,11,12,13,17,18
uglobal
pf_err_code dd ?
endg
page_fault_exc: ; дуракоусточивость: селекторы испорчены...
pop [ss:pf_err_code]; действительно до следующего #PF
save_ring3_context
mov bl, 14
exc_c: ; исключения (все, кроме 7-го - #NM)
; Фрэйм стека при исключении/прерывании из 3-го кольца + pushad (т.е., именно здесь)
reg_ss equ esp+0x30
reg_esp3 equ esp+0x2C
reg_eflags equ esp+0x28
reg_cs3 equ esp+0x24
reg_eip equ esp+0x20
; это фрэйм от pushad
reg_eax equ esp+0x1C
reg_ecx equ esp+0x18
reg_edx equ esp+0x14
reg_ebx equ esp+0x10
reg_esp0 equ esp+0x0C
reg_ebp equ esp+0x08
reg_esi equ esp+0x04
reg_edi equ esp+0x00
mov ax, app_data ;исключение
mov ds, ax ;загрузим правильные значения
mov es, ax ;в регистры
cld ; и приводим DF к стандарту
movzx ebx, bl
; redirect to V86 manager? (EFLAGS & 0x20000) != 0?
test byte[reg_eflags+2], 2
jnz v86_exc_c
cmp bl, 14 ; #PF
jne @f
call page_fault_handler ; SEE: core/memory.inc
@@:
mov esi, [current_slot]
btr [esi+APPDATA.except_mask], ebx
jnc @f
mov eax, [esi+APPDATA.exc_handler]
test eax, eax
jnz IRetToUserHook
@@:
cli
mov eax, [esi+APPDATA.debugger_slot]
test eax, eax
jnz .debug
sti
; not debuggee => say error and terminate
call show_error_parameters ;; only ONE using, inline ???
;mov edx, [TASK_BASE]
mov [edx + TASKDATA.state], byte 4 ; terminate
call wakeup_osloop
call change_task
; If we're here, then the main OS thread has crashed before initializing IDLE thread.
; Or they both have crashed. Anyway, things are hopelessly broken.
hlt
jmp $-1
.debug:
; we are debugged process, notify debugger and suspend ourself
; eax=debugger PID
mov ecx, 1 ; debug_message code=other_exception
cmp bl, 1 ; #DB
jne .notify ; notify debugger and suspend ourself
mov ebx, dr6 ; debug_message data=DR6_image
xor edx, edx
mov dr6, edx
mov edx, dr7
mov cl, not 8
.l1:
shl dl, 2
jc @f
and bl, cl
@@:
sar cl, 1
jc .l1
mov cl, 3 ; debug_message code=debug_exception
.notify:
push ebx ; debug_message data
mov ebx, [TASK_BASE]
push [ebx+TASKDATA.pid] ; PID
push ecx ; debug_message code ((here: ecx==1/3))
mov cl, 12 ; debug_message size
call debugger_notify ;; only ONE using, inline ??? SEE: core/debug.inc
add esp, 12
mov edx, [TASK_BASE]
mov byte [edx+TASKDATA.state], 1 ; suspended
call change_task ; SEE: core/shed.inc
restore_ring3_context
iretd
IRetToUserHook:
xchg eax, [reg_eip]
sub dword[reg_esp3], 8
mov edi, [reg_esp3]
stosd
mov [edi], ebx
restore_ring3_context
; simply return control to interrupted process
unknown_interrupt:
iretd
;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
; bl - error vector
show_error_parameters:
cmp bl, 0x06
jnz .no_ud
push ebx
mov ebx, ud_user_message
mov ebp, notifyapp
call fs_execute_from_sysdir_param
pop ebx
.no_ud:
mov edx, [TASK_BASE];not scratched below
if lang eq sp
DEBUGF 1, "K : Proceso - terminado forzado PID: %x [%s]\n", [edx+TASKDATA.pid], [current_slot]
else
DEBUGF 1, "K : Process - forced terminate PID: %x [%s]\n", [edx+TASKDATA.pid], [current_slot]
end if
cmp bl, 0x08
jb .l0
cmp bl, 0x0e
jbe .l1
.l0:
mov bl, 0x09
.l1:
mov eax, [msg_fault_sel+ebx*4 - 0x08*4]
DEBUGF 1, "K : %s\n", eax
mov eax, [reg_cs3+4]
mov edi, msg_sel_app
mov ebx, [reg_esp3+4]
cmp eax, app_code
je @f
mov edi, msg_sel_ker
mov ebx, [reg_esp0+4]
@@:
DEBUGF 1, "K : EAX : %x EBX : %x ECX : %x\n", [reg_eax+4], [reg_ebx+4], [reg_ecx+4]
DEBUGF 1, "K : EDX : %x ESI : %x EDI : %x\n", [reg_edx+4], [reg_esi+4], [reg_edi+4]
DEBUGF 1, "K : EBP : %x EIP : %x ESP : %x\n", [reg_ebp+4], [reg_eip+4], ebx
DEBUGF 1, "K : Flags : %x CS : %x (%s)\n", [reg_eflags+4], eax, edi
ret
;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
restore reg_ss
restore reg_esp3
restore reg_eflags
restore reg_cs
restore reg_eip
restore reg_eax
restore reg_ecx
restore reg_edx
restore reg_ebx
restore reg_esp0
restore reg_ebp
restore reg_esi
restore reg_edi
align 4
lock_application_table:
push eax ecx edx
mov ecx, application_table_mutex
call mutex_lock
mov eax, [CURRENT_TASK]
shl eax, 5
add eax, CURRENT_TASK+TASKDATA.pid
mov eax, [eax]
mov [application_table_owner], eax
pop edx ecx eax
ret
align 4
unlock_application_table:
push eax ecx edx
mov [application_table_owner], 0
mov ecx, application_table_mutex
call mutex_unlock
pop edx ecx eax
ret
; * eax = 64 - номер функции
; * ebx = 1 - единственная подфункция
; * ecx = новый размер памяти
;Возвращаемое значение:
; * eax = 0 - успешно
; * eax = 1 - недостаточно памяти
align 4
sys_resize_app_memory:
; ebx = 1 - resize
; ecx = new amount of memory
; cmp eax,1
dec ebx
jnz .no_application_mem_resize
stdcall new_mem_resize, ecx
mov [esp+32], eax
.no_application_mem_resize:
ret
iglobal
; process_terminating db 'K : Process - terminating',13,10,0
; process_terminated db 'K : Process - done',13,10,0
msg_obj_destroy db 'K : destroy app object',13,10,0
endg
; param
; esi= slot
align 4
terminate: ; terminate application
.slot equ esp ;locals
push esi ;save .slot
shl esi, 8
cmp [SLOT_BASE+esi+APPDATA.dir_table], 0
jne @F
pop esi
shl esi, 5
mov [CURRENT_TASK+esi+TASKDATA.state], 9
ret
@@:
lea edx, [SLOT_BASE+esi]
call scheduler_remove_thread
;mov esi,process_terminating
;call sys_msg_board_str
call lock_application_table
; if the process is in V86 mode...
mov eax, [.slot]
shl eax, 8
mov esi, [eax+SLOT_BASE+APPDATA.pl0_stack]
add esi, RING0_STACK_SIZE
cmp [eax+SLOT_BASE+APPDATA.saved_esp0], esi
jz .nov86
; ...it has page directory for V86 mode
mov esi, [eax+SLOT_BASE+APPDATA.saved_esp0]
mov ecx, [esi+4]
mov [eax+SLOT_BASE+APPDATA.dir_table], ecx
; ...and I/O permission map for V86 mode
mov ecx, [esi+12]
mov [eax+SLOT_BASE+APPDATA.io_map], ecx
mov ecx, [esi+8]
mov [eax+SLOT_BASE+APPDATA.io_map+4], ecx
.nov86:
mov esi, [.slot]
shl esi, 8
add esi, SLOT_BASE+APP_OBJ_OFFSET
@@:
mov eax, [esi+APPOBJ.fd]
test eax, eax
jz @F
cmp eax, esi
je @F
push esi
call [eax+APPOBJ.destroy]
DEBUGF 1,"%s",msg_obj_destroy
pop esi
jmp @B
@@:
mov eax, [.slot]
shl eax, 8
stdcall destroy_app_space, [SLOT_BASE+eax+APPDATA.dir_table], [SLOT_BASE+eax+APPDATA.dlls_list_ptr]
mov esi, [.slot]
cmp [fpu_owner], esi ; if user fpu last -> fpu user = 2
jne @F
mov [fpu_owner], 2
mov eax, [256*2+SLOT_BASE+APPDATA.fpu_state]
clts
bt [cpu_caps], CAPS_SSE
jnc .no_SSE
fxrstor [eax]
jmp @F
.no_SSE:
fnclex
frstor [eax]
@@:
mov [KEY_COUNT], byte 0 ; empty keyboard buffer
mov [BTN_COUNT], byte 0 ; empty button buffer
; remove defined hotkeys
mov eax, hotkey_list
.loop:
cmp [eax+8], esi
jnz .cont
mov ecx, [eax]
jecxz @f
push dword [eax+12]
pop dword [ecx+12]
@@:
mov ecx, [eax+12]
push dword [eax]
pop dword [ecx]
xor ecx, ecx
mov [eax], ecx
mov [eax+4], ecx
mov [eax+8], ecx
mov [eax+12], ecx
.cont:
add eax, 16
cmp eax, hotkey_list+256*16
jb .loop
; get process PID
mov eax, esi
shl eax, 5
mov eax, [eax+CURRENT_TASK+TASKDATA.pid]
; compare current lock input with process PID
cmp eax, [PID_lock_input]
jne @f
xor eax, eax
mov [PID_lock_input], eax
@@:
; remove hotkeys in buffer
mov eax, hotkey_buffer
.loop2:
cmp [eax], esi
jnz .cont2
and dword [eax+4], 0
and dword [eax], 0
.cont2:
add eax, 8
cmp eax, hotkey_buffer+120*8
jb .loop2
mov ecx, esi ; remove buttons
bnewba2:
mov edi, [BTN_ADDR]
mov eax, edi
cld
movzx ebx, word [edi]
inc bx
bnewba:
dec bx
jz bnmba
add eax, 0x10
cmp cx, [eax]
jnz bnewba
pusha
mov ecx, ebx
inc ecx
shl ecx, 4
mov ebx, eax
add eax, 0x10
call memmove
dec dword [edi]
popa
jmp bnewba2
bnmba:
pusha ; save window coordinates for window restoring
cld
shl esi, 5
add esi, window_data
mov eax, [esi+WDATA.box.left]
mov [draw_limits.left], eax
add eax, [esi+WDATA.box.width]
mov [draw_limits.right], eax
mov eax, [esi+WDATA.box.top]
mov [draw_limits.top], eax
add eax, [esi+WDATA.box.height]
mov [draw_limits.bottom], eax
xor eax, eax
mov [esi+WDATA.box.left], eax
mov [esi+WDATA.box.width], eax
mov [esi+WDATA.box.top], eax
mov [esi+WDATA.box.height], eax
mov [esi+WDATA.cl_workarea], eax
mov [esi+WDATA.cl_titlebar], eax
mov [esi+WDATA.cl_frames], eax
mov dword [esi+WDATA.reserved], eax; clear all flags: wstate, redraw, wdrawn
lea edi, [esi-window_data+draw_data]
mov ecx, 32/4
rep stosd
popa
; debuggee test
pushad
mov edi, esi
shl edi, 5
mov eax, [SLOT_BASE+edi*8+APPDATA.debugger_slot]
test eax, eax
jz .nodebug
movi ecx, 8
push dword [CURRENT_TASK+edi+TASKDATA.pid]; PID
push 2
call debugger_notify
pop ecx
pop ecx
.nodebug:
popad
mov ebx, [.slot]
shl ebx, 8
push ebx
mov ebx, [SLOT_BASE+ebx+APPDATA.pl0_stack]
stdcall kernel_free, ebx
pop ebx
mov ebx, [SLOT_BASE+ebx+APPDATA.cur_dir]
stdcall kernel_free, ebx
mov edi, [.slot]
shl edi, 8
add edi, SLOT_BASE
mov eax, [edi+APPDATA.io_map]
cmp eax, [SLOT_BASE+256+APPDATA.io_map]
je @F
call free_page
@@:
mov eax, [edi+APPDATA.io_map+4]
cmp eax, [SLOT_BASE+256+APPDATA.io_map+4]
je @F
call free_page
@@:
mov eax, 0x20202020
stosd
stosd
stosd
mov ecx, 244/4
xor eax, eax
rep stosd
; activate window
movzx eax, word [WIN_STACK + esi*2]
cmp eax, [TASK_COUNT]
jne .dont_activate
pushad
.check_next_window:
dec eax
cmp eax, 1
jbe .nothing_to_activate
lea esi, [WIN_POS+eax*2]
movzx edi, word [esi] ; edi = process
shl edi, 5
cmp [CURRENT_TASK + edi + TASKDATA.state], byte 9 ; skip dead slots
je .check_next_window
add edi, window_data
; \begin{diamond}[19.09.2006]
; skip minimized windows
test [edi + WDATA.fl_wstate], WSTATE_MINIMIZED
jnz .check_next_window
; \end{diamond}
call waredraw
.nothing_to_activate:
popad
.dont_activate:
push esi ; remove hd1 & cd & flp reservation
shl esi, 5
mov esi, [esi+CURRENT_TASK+TASKDATA.pid]
cmp [hd1_status], esi
jnz @f
call free_hd_channel
and [hd1_status], 0
@@:
cmp [cd_status], esi
jnz @f
call free_cd_channel
and [cd_status], 0
@@:
cmp [flp_status], esi
jnz @f
and [flp_status], 0
@@:
pop esi
cmp [bgrlockpid], esi
jnz @f
and [bgrlockpid], 0
and [bgrlock], 0
@@:
pusha ; remove all port reservations
mov edx, esi
shl edx, 5
add edx, CURRENT_TASK
mov edx, [edx+TASKDATA.pid]
rmpr0:
mov esi, [RESERVED_PORTS]
test esi, esi
jz rmpr9
rmpr3:
mov edi, esi
shl edi, 4
add edi, RESERVED_PORTS
cmp edx, [edi]
je rmpr4
dec esi
jnz rmpr3
jmp rmpr9
rmpr4:
mov ecx, 256
sub ecx, esi
shl ecx, 4
mov esi, edi
add esi, 16
cld
rep movsb
dec dword [RESERVED_PORTS]
jmp rmpr0
rmpr9:
popa
mov edi, esi ; do not run this process slot
shl edi, 5
mov [edi+CURRENT_TASK + TASKDATA.state], byte 9
; debugger test - terminate all debuggees
mov eax, 2
mov ecx, SLOT_BASE+2*0x100+APPDATA.debugger_slot
.xd0:
cmp eax, [TASK_COUNT]
ja .xd1
cmp dword [ecx], esi
jnz @f
and dword [ecx], 0
pushad
xchg eax, ecx
mov ebx, 2
call sys_system
popad
@@:
inc eax
add ecx, 0x100
jmp .xd0
.xd1:
; call systest
sti ; .. and life goes on
mov eax, [draw_limits.left]
mov ebx, [draw_limits.top]
mov ecx, [draw_limits.right]
mov edx, [draw_limits.bottom]
call calculatescreen
xor eax, eax
xor esi, esi
call redrawscreen
call unlock_application_table
;mov esi,process_terminated
;call sys_msg_board_str
add esp, 4
ret
restore .slot
;build_scheduler:
; mov esi, boot_sched_1
; call boot_log
; call build_process_gdt_tss_pointer
; mov esi,boot_sched_2
; call boot_log
; ret
; Three following procedures are used to guarantee that
; some part of kernel code will not be terminated from outside
; while it is running.
; Note: they do not protect a thread from terminating due to errors inside
; the thread; accessing a nonexisting memory would still terminate it.
; First two procedures must be used in pair by thread-to-be-protected
; to signal the beginning and the end of an important part.
; It is OK to have nested areas.
; The last procedure must be used by outside wanna-be-terminators;
; if it is safe to terminate the given thread immediately, it returns eax=1;
; otherwise, it returns eax=0 and notifies the target thread that it should
; terminate itself when leaving a critical area (the last critical area if
; they are nested).
; Implementation. Those procedures use one dword in APPDATA for the thread,
; APPDATA.terminate_protection.
; * The upper bit is 1 during normal operations and 0 when terminate is requested.
; * Other bits form a number = depth of critical regions,
; plus 1 if the upper bit is 1.
; * When this dword goes to zero, the thread should be destructed,
; and the procedure in which it happened becomes responsible for destruction.
; Enter critical area. Called by thread which wants to be protected.
proc protect_from_terminate
mov edx, [current_slot]
; Atomically increment depth of critical areas and get the old value.
mov eax, 1
lock xadd [edx+APPDATA.terminate_protection], eax
; If the old value was zero, somebody has started to terminate us,
; so we are destructing and cannot do anything protected.
; Otherwise, return to the caller.
test eax, eax
jz @f
ret
@@:
; Wait for somebody to finish us.
call change_task
jmp @b
endp
; Leave critical area. Called by thread which wants to be protected.
proc unprotect_from_terminate
mov edx, [current_slot]
; Atomically decrement depth of critical areas.
lock dec [edx+APPDATA.terminate_protection]
; If the result of decrement is zero, somebody has requested termination,
; but at that moment we were inside a critical area; terminate now.
jz sys_end
; Otherwise, return to the caller.
ret
endp
; Request termination of thread identified by edx = SLOT_BASE + slot*256.
; Called by anyone.
proc request_terminate
xor eax, eax ; set return value
; Atomically clear the upper bit. If it was already zero, then
; somebody has requested termination before us, so just exit.
lock btr [edx+APPDATA.terminate_protection], 31
jnc .unsafe
; Atomically decrement depth of critical areas.
lock dec [edx+APPDATA.terminate_protection]
; If the result of decrement is nonzero, the target thread is inside a
; critical area; leave termination to leaving that area.
jnz .unsafe
; Otherwise, it is safe to kill the target now and the caller is responsible
; for this. Return eax=1.
inc eax
.unsafe:
ret
endp