kolibrios/contrib/toolchain/avra/includes/m8515def.inc
Serhii Sakhno 7c539d8e19 upload avra
git-svn-id: svn://kolibrios.org@6400 a494cfbc-eb01-0410-851d-a64ba20cac60
2016-04-13 17:05:47 +00:00

684 lines
23 KiB
C++

;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2005-01-11 10:31 ******* Source: ATmega8515.xml **********
;*************************************************************************
;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
;*
;* Number : AVR000
;* File Name : "m8515def.inc"
;* Title : Register/Bit Definitions for the ATmega8515
;* Date : 2005-01-11
;* Version : 2.14
;* Support E-mail : avr@atmel.com
;* Target MCU : ATmega8515
;*
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and
;* Z have been assigned names XL - ZH. Highest RAM address for Internal
;* SRAM is also defined
;*
;* The Register names are represented by their hexadecimal address.
;*
;* The Register Bit names are represented by their bit number (0-7).
;*
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;*
;* in r16,PORTB ;read PORTB latch
;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out PORTB,r16 ;output to PORTB
;*
;* in r16,TIFR ;read the Timer Interrupt Flag Register
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
;* rjmp TOV0_is_set ;jump if set
;* ... ;otherwise do something else
;*************************************************************************
#ifndef _M8515DEF_INC_
#define _M8515DEF_INC_
#pragma partinc 0
; ***** SPECIFY DEVICE ***************************************************
.device ATmega8515
#pragma AVRPART ADMIN PART_NAME ATmega8515
.equ SIGNATURE_000 = 0x1e
.equ SIGNATURE_001 = 0x93
.equ SIGNATURE_002 = 0x06
#pragma AVRPART CORE CORE_VERSION V2E
; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ SREG = 0x3f
.equ SPH = 0x3e
.equ SPL = 0x3d
.equ GICR = 0x3b
.equ GIFR = 0x3a
.equ TIMSK = 0x39
.equ TIFR = 0x38
.equ SPMCR = 0x37
.equ EMCUCR = 0x36
.equ MCUCR = 0x35
.equ MCUCSR = 0x34
.equ TCCR0 = 0x33
.equ TCNT0 = 0x32
.equ OCR0 = 0x31
.equ SFIOR = 0x30
.equ TCCR1A = 0x2f
.equ TCCR1B = 0x2e
.equ TCNT1H = 0x2d
.equ TCNT1L = 0x2c
.equ OCR1AH = 0x2b
.equ OCR1AL = 0x2a
.equ OCR1BH = 0x29
.equ OCR1BL = 0x28
.equ ICR1H = 0x25
.equ ICR1L = 0x24
.equ WDTCR = 0x21
.equ UBRRH = 0x20
.equ UCSRC = 0x20
.equ EEARH = 0x1f
.equ EEARL = 0x1e
.equ EEDR = 0x1d
.equ EECR = 0x1c
.equ PORTA = 0x1b
.equ DDRA = 0x1a
.equ PINA = 0x19
.equ PORTB = 0x18
.equ DDRB = 0x17
.equ PINB = 0x16
.equ PORTC = 0x15
.equ DDRC = 0x14
.equ PINC = 0x13
.equ PORTD = 0x12
.equ DDRD = 0x11
.equ PIND = 0x10
.equ SPDR = 0x0f
.equ SPSR = 0x0e
.equ SPCR = 0x0d
.equ UDR = 0x0c
.equ UCSRA = 0x0b
.equ UCSRB = 0x0a
.equ UBRRL = 0x09
.equ ACSR = 0x08
.equ PORTE = 0x07
.equ DDRE = 0x06
.equ PINE = 0x05
.equ OSCCAL = 0x04
; ***** BIT DEFINITIONS **************************************************
; ***** ANALOG_COMPARATOR ************
; ACSR - Analog Comparator Control And Status Register
.equ ACIS0 = 0 ; Analog Comparator Interrupt Mode Select bit 0
.equ ACIS1 = 1 ; Analog Comparator Interrupt Mode Select bit 1
.equ ACIC = 2 ; Analog Comparator Input Capture Enable
.equ ACIE = 3 ; Analog Comparator Interrupt Enable
.equ ACI = 4 ; Analog Comparator Interrupt Flag
.equ ACO = 5 ; Analog Compare Output
.equ ACBG = 6 ; Analog Comparator Bandgap Select
.equ AINBG = ACBG ; For compatibility
.equ ACD = 7 ; Analog Comparator Disable
; ***** USART ************************
; UDR - USART I/O Data Register
.equ UDR0 = 0 ; USART I/O Data Register bit 0
.equ UDR1 = 1 ; USART I/O Data Register bit 1
.equ UDR2 = 2 ; USART I/O Data Register bit 2
.equ UDR3 = 3 ; USART I/O Data Register bit 3
.equ UDR4 = 4 ; USART I/O Data Register bit 4
.equ UDR5 = 5 ; USART I/O Data Register bit 5
.equ UDR6 = 6 ; USART I/O Data Register bit 6
.equ UDR7 = 7 ; USART I/O Data Register bit 7
; UCSRA - USART Control and Status Register A
.equ MPCM = 0 ; Multi-processor Communication Mode
.equ U2X = 1 ; Double the USART transmission speed
.equ UPE = 2 ; Parity Error
.equ PE = UPE ; For compatibility
.equ DOR = 3 ; Data overRun
.equ FE = 4 ; Framing Error
.equ UDRE = 5 ; USART Data Register Empty
.equ TXC = 6 ; USART Transmitt Complete
.equ RXC = 7 ; USART Receive Complete
; UCSRB - USART Control and Status Register B
.equ TXB8 = 0 ; Transmit Data Bit 8
.equ RXB8 = 1 ; Receive Data Bit 8
.equ UCSZ2 = 2 ; Character Size Bit 2
.equ CHR9 = UCSZ2 ; For compatibility
.equ TXEN = 3 ; Transmitter Enable
.equ RXEN = 4 ; Receiver Enable
.equ UDRIE = 5 ; USART Data register Empty Interrupt Enable
.equ TXCIE = 6 ; TX Complete Interrupt Enable
.equ RXCIE = 7 ; RX Complete Interrupt Enable
; UCSRC - USART Control and Status Register C
.equ UCPOL = 0 ; Clock Polarity
.equ UCSZ0 = 1 ; Character Size Bit 0
.equ UCSZ1 = 2 ; Character Size Bit 1
.equ USBS = 3 ; Stop Bit Select
.equ UPM0 = 4 ; Parity Mode Bit 0
.equ UPM1 = 5 ; Parity Mode Bit 1
.equ UMSEL = 6 ; USART Mode Select
.equ URSEL = 7 ; Register Select
; UBRRH - USART Baud Rate Register High Byte
.equ UBRR8 = 0 ; USART Baud Rate Register bit 8
.equ UBRR9 = 1 ; USART Baud Rate Register bit 9
.equ UBRR10 = 2 ; USART Baud Rate Register bit 10
.equ UBRR11 = 3 ; USART Baud Rate Register bit 11
;.equ URSEL = 7 ; Register Select
; ***** SPI **************************
; SPDR - SPI Data Register
.equ SPDR0 = 0 ; SPI Data Register bit 0
.equ SPDR1 = 1 ; SPI Data Register bit 1
.equ SPDR2 = 2 ; SPI Data Register bit 2
.equ SPDR3 = 3 ; SPI Data Register bit 3
.equ SPDR4 = 4 ; SPI Data Register bit 4
.equ SPDR5 = 5 ; SPI Data Register bit 5
.equ SPDR6 = 6 ; SPI Data Register bit 6
.equ SPDR7 = 7 ; SPI Data Register bit 7
; SPSR - SPI Status Register
.equ SPI2X = 0 ; Double SPI Speed Bit
.equ WCOL = 6 ; Write Collision Flag
.equ SPIF = 7 ; SPI Interrupt Flag
; SPCR - SPI Control Register
.equ SPR0 = 0 ; SPI Clock Rate Select 0
.equ SPR1 = 1 ; SPI Clock Rate Select 1
.equ CPHA = 2 ; Clock Phase
.equ CPOL = 3 ; Clock polarity
.equ MSTR = 4 ; Master/Slave Select
.equ DORD = 5 ; Data Order
.equ SPE = 6 ; SPI Enable
.equ SPIE = 7 ; SPI Interrupt Enable
; ***** CPU **************************
; SREG - Status Register
.equ SREG_C = 0 ; Carry Flag
.equ SREG_Z = 1 ; Zero Flag
.equ SREG_N = 2 ; Negative Flag
.equ SREG_V = 3 ; Two's Complement Overflow Flag
.equ SREG_S = 4 ; Sign Bit
.equ SREG_H = 5 ; Half Carry Flag
.equ SREG_T = 6 ; Bit Copy Storage
.equ SREG_I = 7 ; Global Interrupt Enable
; EMCUCR - Extended MCU Control Register
.equ ISC2 = 0 ; Interrupt Sense Control 2
.equ SRW11 = 1 ; Wait State Select Bits for Upper Sector, bit 1
.equ SRW00 = 2 ; Wait State Select Bits for Lower Sector, bit 0
.equ SRW01 = 3 ; Wait State Select Bits for Lower Sector, bit 1
.equ SRL0 = 4 ; Wait State Selector Limit bit 0
.equ SRL1 = 5 ; Wait State Selector Limit bit 1
.equ SRL2 = 6 ; Wait State Selector Limit bit 2
.equ SM0 = 7 ; Sleep Mode Select Bit 0
; MCUCR - MCU Control Register
.equ ISC00 = 0 ; Interrupt Sense Control 0 Bit 0
.equ ISC01 = 1 ; Interrupt Sense Control 0 Bit 1
.equ ISC10 = 2 ; Interrupt Sense Control 1 Bit 0
.equ ISC11 = 3 ; Interrupt Sense Control 1 Bit 1
.equ SM1 = 4 ; Sleep Mode Select Bit 1
.equ SE = 5 ; Sleep Enable
.equ SRW10 = 6 ; Wait State Select Bits for Upper Sector, bit 0
.equ SRE = 7 ; External SRAM/XMEM Enable
; MCUCSR - MCU Control And Status Register
.equ MCUSR = MCUCSR ; For compatibility
.equ PORF = 0 ; Power-on reset flag
.equ EXTRF = 1 ; External Reset Flag
.equ BORF = 2 ; Brown-out Reset Flag
.equ WDRF = 3 ; Watchdog Reset Flag
.equ SM2 = 5 ; Sleep Mode Select Bit 2
; OSCCAL - Oscillator Calibration Value
.equ CAL0 = 0 ; Oscillator Calibration Value Bit0
.equ CAL1 = 1 ; Oscillator Calibration Value Bit1
.equ CAL2 = 2 ; Oscillator Calibration Value Bit2
.equ CAL3 = 3 ; Oscillator Calibration Value Bit3
.equ CAL4 = 4 ; Oscillator Calibration Value Bit4
.equ CAL5 = 5 ; Oscillator Calibration Value Bit5
.equ CAL6 = 6 ; Oscillator Calibration Value Bit6
.equ CAL7 = 7 ; Oscillator Calibration Value Bit7
; SPMCR - Store Program Memory Control Register
.equ SPMEN = 0 ; Store Program Memory Enable
.equ PGERS = 1 ; Page Erase
.equ PGWRT = 2 ; Page Write
.equ BLBSET = 3 ; Boot Lock Bit Set
.equ RWWSRE = 4 ; Read-While-Write Section Read Enable
.equ ASRE = RWWSRE ; For compatibility
.equ RWWSB = 6 ; Read-While-Write Section Busy
.equ ASB = RWWSB ; For compatibility
.equ SPMIE = 7 ; SPM Interrupt Enable
; SFIOR - Special Function IO Register
.equ PSR10 = 0 ; Prescaler Reset Timer / Counter 1 and Timer / Counter 0
.equ PUD = 2 ; Pull-up Disable
.equ XMM0 = 3 ; External Memory High Mask Bit 0
.equ XMM1 = 4 ; External Memory High Mask Bit 1
.equ XMM2 = 5 ; External Memory High Mask Bit 2
.equ XMBK = 6 ; External Memory Bus Keeper Enable
; ***** EXTERNAL_INTERRUPT ***********
; GICR - General Interrupt Control Register
.equ GIMSK = GICR ; For compatibility
.equ IVCE = 0 ; Interrupt Vector Change Enable
.equ IVSEL = 1 ; Interrupt Vector Select
.equ INT2 = 5 ; External Interrupt Request 2 Enable
.equ INT0 = 6 ; External Interrupt Request 0 Enable
.equ INT1 = 7 ; External Interrupt Request 1 Enable
; GIFR - General Interrupt Flag Register
.equ INTF2 = 5 ; External Interrupt Flag 2
.equ INTF0 = 6 ; External Interrupt Flag 0
.equ INTF1 = 7 ; External Interrupt Flag 1
; ***** WATCHDOG *********************
; WDTCR - Watchdog Timer Control Register
.equ WDTCSR = WDTCR ; For compatibility
.equ WDP0 = 0 ; Watch Dog Timer Prescaler bit 0
.equ WDP1 = 1 ; Watch Dog Timer Prescaler bit 1
.equ WDP2 = 2 ; Watch Dog Timer Prescaler bit 2
.equ WDE = 3 ; Watch Dog Enable
.equ WDCE = 4 ; Watchdog Change Enable
.equ WDTOE = WDCE ; For compatibility
; ***** TIMER_COUNTER_0 **************
; TCCR0 - Timer/Counter 0 Control Register
.equ CS00 = 0 ; Clock Select 1
.equ CS01 = 1 ; Clock Select 1
.equ CS02 = 2 ; Clock Select 2
.equ WGM01 = 3 ; Waveform Generation Mode 1
.equ CTC0 = WGM01 ; For compatibility
.equ COM00 = 4 ; Compare match Output Mode 0
.equ COM01 = 5 ; Compare Match Output Mode 1
.equ WGM00 = 6 ; Waveform Generation Mode 0
.equ PWM0 = WGM00 ; For compatibility
.equ FOC0 = 7 ; Force Output Compare
; TCNT0 - Timer/Counter 0 Register
.equ TCNT0_0 = 0 ;
.equ TCNT0_1 = 1 ;
.equ TCNT0_2 = 2 ;
.equ TCNT0_3 = 3 ;
.equ TCNT0_4 = 4 ;
.equ TCNT0_5 = 5 ;
.equ TCNT0_6 = 6 ;
.equ TCNT0_7 = 7 ;
; OCR0 - Timer/Counter 0 Output Compare Register
.equ OCR0_0 = 0 ;
.equ OCR0_1 = 1 ;
.equ OCR0_2 = 2 ;
.equ OCR0_3 = 3 ;
.equ OCR0_4 = 4 ;
.equ OCR0_5 = 5 ;
.equ OCR0_6 = 6 ;
.equ OCR0_7 = 7 ;
; TIMSK - Timer/Counter Interrupt Mask Register
.equ OCIE0 = 0 ; Timer/Counter0 Output Compare Match Interrupt register
.equ TOIE0 = 1 ; Timer/Counter0 Overflow Interrupt Enable
; TIFR - Timer/Counter Interrupt Flag register
.equ OCF0 = 0 ; Output Compare Flag 0
.equ TOV0 = 1 ; Timer/Counter0 Overflow Flag
; ***** TIMER_COUNTER_1 **************
; TIMSK - Timer/Counter Interrupt Mask Register
.equ TICIE1 = 3 ; Timer/Counter1 Input Capture Interrupt Enable
.equ OCIE1B = 5 ; Timer/Counter1 Output CompareB Match Interrupt Enable
.equ OCIE1A = 6 ; Timer/Counter1 Output CompareA Match Interrupt Enable
.equ TOIE1 = 7 ; Timer/Counter1 Overflow Interrupt Enable
; TIFR - Timer/Counter Interrupt Flag register
.equ ICF1 = 3 ; Input Capture Flag 1
.equ OCF1B = 5 ; Output Compare Flag 1B
.equ OCF1A = 6 ; Output Compare Flag 1A
.equ TOV1 = 7 ; Timer/Counter1 Overflow Flag
; TCCR1A - Timer/Counter1 Control Register A
.equ WGM10 = 0 ; Pulse Width Modulator Select Bit 0
.equ PWM10 = WGM10 ; For compatibility
.equ WGM11 = 1 ; Pulse Width Modulator Select Bit 1
.equ PWM11 = WGM11 ; For compatibility
.equ FOC1B = 2 ; Force Output Compare for Channel B
.equ FOC1A = 3 ; Force Output Compare for Channel A
.equ COM1B0 = 4 ; Compare Output Mode 1B, bit 0
.equ COM1B1 = 5 ; Compare Output Mode 1B, bit 1
.equ COM1A0 = 6 ; Compare Ouput Mode 1A, bit 0
.equ COM1A1 = 7 ; Compare Output Mode 1A, bit 1
; TCCR1B - Timer/Counter1 Control Register B
.equ CS10 = 0 ; Clock Select1 bit 0
.equ CS11 = 1 ; Clock Select1 bit 1
.equ CS12 = 2 ; Clock Select1 bit 2
.equ WGM12 = 3 ; Pulse Width Modulator Select Bit 2
.equ CTC10 = WGM12 ; For compatibility
.equ WGM13 = 4 ; Pulse Width Modulator Select Bit 3
.equ CTC11 = WGM13 ; For compatibility
.equ ICES1 = 6 ; Input Capture 1 Edge Select
.equ ICNC1 = 7 ; Input Capture 1 Noise Canceler
; ***** PORTA ************************
; PORTA - Port A Data Register
.equ PORTA0 = 0 ; Port A Data Register bit 0
.equ PA0 = 0 ; For compatibility
.equ PORTA1 = 1 ; Port A Data Register bit 1
.equ PA1 = 1 ; For compatibility
.equ PORTA2 = 2 ; Port A Data Register bit 2
.equ PA2 = 2 ; For compatibility
.equ PORTA3 = 3 ; Port A Data Register bit 3
.equ PA3 = 3 ; For compatibility
.equ PORTA4 = 4 ; Port A Data Register bit 4
.equ PA4 = 4 ; For compatibility
.equ PORTA5 = 5 ; Port A Data Register bit 5
.equ PA5 = 5 ; For compatibility
.equ PORTA6 = 6 ; Port A Data Register bit 6
.equ PA6 = 6 ; For compatibility
.equ PORTA7 = 7 ; Port A Data Register bit 7
.equ PA7 = 7 ; For compatibility
; DDRA - Port A Data Direction Register
.equ DDA0 = 0 ; Data Direction Register, Port A, bit 0
.equ DDA1 = 1 ; Data Direction Register, Port A, bit 1
.equ DDA2 = 2 ; Data Direction Register, Port A, bit 2
.equ DDA3 = 3 ; Data Direction Register, Port A, bit 3
.equ DDA4 = 4 ; Data Direction Register, Port A, bit 4
.equ DDA5 = 5 ; Data Direction Register, Port A, bit 5
.equ DDA6 = 6 ; Data Direction Register, Port A, bit 6
.equ DDA7 = 7 ; Data Direction Register, Port A, bit 7
; PINA - Port A Input Pins
.equ PINA0 = 0 ; Input Pins, Port A bit 0
.equ PINA1 = 1 ; Input Pins, Port A bit 1
.equ PINA2 = 2 ; Input Pins, Port A bit 2
.equ PINA3 = 3 ; Input Pins, Port A bit 3
.equ PINA4 = 4 ; Input Pins, Port A bit 4
.equ PINA5 = 5 ; Input Pins, Port A bit 5
.equ PINA6 = 6 ; Input Pins, Port A bit 6
.equ PINA7 = 7 ; Input Pins, Port A bit 7
; ***** PORTB ************************
; PORTB - Port B Data Register
.equ PORTB0 = 0 ; Port B Data Register bit 0
.equ PB0 = 0 ; For compatibility
.equ PORTB1 = 1 ; Port B Data Register bit 1
.equ PB1 = 1 ; For compatibility
.equ PORTB2 = 2 ; Port B Data Register bit 2
.equ PB2 = 2 ; For compatibility
.equ PORTB3 = 3 ; Port B Data Register bit 3
.equ PB3 = 3 ; For compatibility
.equ PORTB4 = 4 ; Port B Data Register bit 4
.equ PB4 = 4 ; For compatibility
.equ PORTB5 = 5 ; Port B Data Register bit 5
.equ PB5 = 5 ; For compatibility
.equ PORTB6 = 6 ; Port B Data Register bit 6
.equ PB6 = 6 ; For compatibility
.equ PORTB7 = 7 ; Port B Data Register bit 7
.equ PB7 = 7 ; For compatibility
; DDRB - Port B Data Direction Register
.equ DDB0 = 0 ; Port B Data Direction Register bit 0
.equ DDB1 = 1 ; Port B Data Direction Register bit 1
.equ DDB2 = 2 ; Port B Data Direction Register bit 2
.equ DDB3 = 3 ; Port B Data Direction Register bit 3
.equ DDB4 = 4 ; Port B Data Direction Register bit 4
.equ DDB5 = 5 ; Port B Data Direction Register bit 5
.equ DDB6 = 6 ; Port B Data Direction Register bit 6
.equ DDB7 = 7 ; Port B Data Direction Register bit 7
; PINB - Port B Input Pins
.equ PINB0 = 0 ; Port B Input Pins bit 0
.equ PINB1 = 1 ; Port B Input Pins bit 1
.equ PINB2 = 2 ; Port B Input Pins bit 2
.equ PINB3 = 3 ; Port B Input Pins bit 3
.equ PINB4 = 4 ; Port B Input Pins bit 4
.equ PINB5 = 5 ; Port B Input Pins bit 5
.equ PINB6 = 6 ; Port B Input Pins bit 6
.equ PINB7 = 7 ; Port B Input Pins bit 7
; ***** PORTC ************************
; PORTC - Port C Data Register
.equ PORTC0 = 0 ; Port C Data Register bit 0
.equ PC0 = 0 ; For compatibility
.equ PORTC1 = 1 ; Port C Data Register bit 1
.equ PC1 = 1 ; For compatibility
.equ PORTC2 = 2 ; Port C Data Register bit 2
.equ PC2 = 2 ; For compatibility
.equ PORTC3 = 3 ; Port C Data Register bit 3
.equ PC3 = 3 ; For compatibility
.equ PORTC4 = 4 ; Port C Data Register bit 4
.equ PC4 = 4 ; For compatibility
.equ PORTC5 = 5 ; Port C Data Register bit 5
.equ PC5 = 5 ; For compatibility
.equ PORTC6 = 6 ; Port C Data Register bit 6
.equ PC6 = 6 ; For compatibility
.equ PORTC7 = 7 ; Port C Data Register bit 7
.equ PC7 = 7 ; For compatibility
; DDRC - Port C Data Direction Register
.equ DDC0 = 0 ; Port C Data Direction Register bit 0
.equ DDC1 = 1 ; Port C Data Direction Register bit 1
.equ DDC2 = 2 ; Port C Data Direction Register bit 2
.equ DDC3 = 3 ; Port C Data Direction Register bit 3
.equ DDC4 = 4 ; Port C Data Direction Register bit 4
.equ DDC5 = 5 ; Port C Data Direction Register bit 5
.equ DDC6 = 6 ; Port C Data Direction Register bit 6
.equ DDC7 = 7 ; Port C Data Direction Register bit 7
; PINC - Port C Input Pins
.equ PINC0 = 0 ; Port C Input Pins bit 0
.equ PINC1 = 1 ; Port C Input Pins bit 1
.equ PINC2 = 2 ; Port C Input Pins bit 2
.equ PINC3 = 3 ; Port C Input Pins bit 3
.equ PINC4 = 4 ; Port C Input Pins bit 4
.equ PINC5 = 5 ; Port C Input Pins bit 5
.equ PINC6 = 6 ; Port C Input Pins bit 6
.equ PINC7 = 7 ; Port C Input Pins bit 7
; ***** PORTD ************************
; PORTD - Port D Data Register
.equ PORTD0 = 0 ; Port D Data Register bit 0
.equ PD0 = 0 ; For compatibility
.equ PORTD1 = 1 ; Port D Data Register bit 1
.equ PD1 = 1 ; For compatibility
.equ PORTD2 = 2 ; Port D Data Register bit 2
.equ PD2 = 2 ; For compatibility
.equ PORTD3 = 3 ; Port D Data Register bit 3
.equ PD3 = 3 ; For compatibility
.equ PORTD4 = 4 ; Port D Data Register bit 4
.equ PD4 = 4 ; For compatibility
.equ PORTD5 = 5 ; Port D Data Register bit 5
.equ PD5 = 5 ; For compatibility
.equ PORTD6 = 6 ; Port D Data Register bit 6
.equ PD6 = 6 ; For compatibility
.equ PORTD7 = 7 ; Port D Data Register bit 7
.equ PD7 = 7 ; For compatibility
; DDRD - Port D Data Direction Register
.equ DDD0 = 0 ; Port D Data Direction Register bit 0
.equ DDD1 = 1 ; Port D Data Direction Register bit 1
.equ DDD2 = 2 ; Port D Data Direction Register bit 2
.equ DDD3 = 3 ; Port D Data Direction Register bit 3
.equ DDD4 = 4 ; Port D Data Direction Register bit 4
.equ DDD5 = 5 ; Port D Data Direction Register bit 5
.equ DDD6 = 6 ; Port D Data Direction Register bit 6
.equ DDD7 = 7 ; Port D Data Direction Register bit 7
; PIND - Port D Input Pins
.equ PIND0 = 0 ; Port D Input Pins bit 0
.equ PIND1 = 1 ; Port D Input Pins bit 1
.equ PIND2 = 2 ; Port D Input Pins bit 2
.equ PIND3 = 3 ; Port D Input Pins bit 3
.equ PIND4 = 4 ; Port D Input Pins bit 4
.equ PIND5 = 5 ; Port D Input Pins bit 5
.equ PIND6 = 6 ; Port D Input Pins bit 6
.equ PIND7 = 7 ; Port D Input Pins bit 7
; ***** PORTE ************************
; PORTE - Port E Data Register
.equ PORTE0 = 0 ;
.equ PE0 = 0 ; For compatibility
.equ PORTE1 = 1 ;
.equ PE1 = 1 ; For compatibility
.equ PORTE2 = 2 ;
.equ PE2 = 2 ; For compatibility
; DDRE - Port E Data Direction Register
.equ DDE0 = 0 ;
.equ DDE1 = 1 ;
.equ DDE2 = 2 ;
; PINE - Port E Input Pins
.equ PINE0 = 0 ;
.equ PINE1 = 1 ;
.equ PINE2 = 2 ;
; ***** EEPROM ***********************
; EEDR - EEPROM Data Register
.equ EEDR0 = 0 ; EEPROM Data Register bit 0
.equ EEDR1 = 1 ; EEPROM Data Register bit 1
.equ EEDR2 = 2 ; EEPROM Data Register bit 2
.equ EEDR3 = 3 ; EEPROM Data Register bit 3
.equ EEDR4 = 4 ; EEPROM Data Register bit 4
.equ EEDR5 = 5 ; EEPROM Data Register bit 5
.equ EEDR6 = 6 ; EEPROM Data Register bit 6
.equ EEDR7 = 7 ; EEPROM Data Register bit 7
; EECR - EEPROM Control Register
.equ EERE = 0 ; EEPROM Read Enable
.equ EEWE = 1 ; EEPROM Write Enable
.equ EEMWE = 2 ; EEPROM Master Write Enable
.equ EEWEE = EEMWE ; For compatibility
.equ EERIE = 3 ; EEPROM Ready Interrupt Enable
; ***** LOCKSBITS ********************************************************
.equ LB1 = 0 ; Lock bit
.equ LB2 = 1 ; Lock bit
.equ BLB01 = 2 ; Boot Lock bit
.equ BLB02 = 3 ; Boot Lock bit
.equ BLB11 = 4 ; Boot lock bit
.equ BLB12 = 5 ; Boot lock bit
; ***** FUSES ************************************************************
; LOW fuse bits
.equ CKSEL0 = 0 ; Select Clock Source
.equ CKSEL1 = 1 ; Select Clock Source
.equ CKSEL2 = 2 ; Select Clock Source
.equ CKSEL3 = 3 ; Select Clock Source
.equ SUT0 = 4 ; Select start-up time
.equ SUT1 = 5 ; Select start-up time
.equ BODEN = 6 ; Brown out detector enable
.equ BODLEVEL = 7 ; Brown out detector trigger level
; HIGH fuse bits
.equ BOOTRST = 0 ; Select Reset Vector
.equ BOOTSZ0 = 1 ; Select Boot Size
.equ BOOTSZ1 = 2 ; Select Boot Size
.equ EESAVE = 3 ; EEPROM memory is preserved through chip erase
.equ CKOPT = 4 ; Oscillator Options
.equ SPIEN = 5 ; Enable Serial programming and Data Downloading
.equ WDTON = 6 ; Watchdog timer always on
.equ S8515C = 7 ; AT90S4414/8515 compabillity mode
; ***** CPU REGISTER DEFINITIONS *****************************************
.def XH = r27
.def XL = r26
.def YH = r29
.def YL = r28
.def ZH = r31
.def ZL = r30
; ***** DATA MEMORY DECLARATIONS *****************************************
.equ FLASHEND = 0x0fff ; Note: Word address
.equ IOEND = 0x003f
.equ SRAM_START = 0x0060
.equ SRAM_SIZE = 512
.equ RAMEND = 0x025f
.equ XRAMEND = 0xffff
.equ E2END = 0x01ff
.equ EEPROMEND = 0x01ff
.equ EEADRBITS = 9
#pragma AVRPART MEMORY PROG_FLASH 8192
#pragma AVRPART MEMORY EEPROM 512
#pragma AVRPART MEMORY INT_SRAM SIZE 512
#pragma AVRPART MEMORY INT_SRAM START_ADDR 0x60
; ***** BOOTLOADER DECLARATIONS ******************************************
.equ NRWW_START_ADDR = 0xc00
.equ NRWW_STOP_ADDR = 0xfff
.equ RWW_START_ADDR = 0x0
.equ RWW_STOP_ADDR = 0xbff
.equ PAGESIZE = 32
.equ FIRSTBOOTSTART = 0xf80
.equ SECONDBOOTSTART = 0xf00
.equ THIRDBOOTSTART = 0xe00
.equ FOURTHBOOTSTART = 0xc00
.equ SMALLBOOTSTART = FIRSTBOOTSTART
.equ LARGEBOOTSTART = FOURTHBOOTSTART
; ***** INTERRUPT VECTORS ************************************************
.equ INT0addr = 0x0001 ; External Interrupt Request 0
.equ INT1addr = 0x0002 ; External Interrupt Request 1
.equ ICP1addr = 0x0003 ; Timer/Counter1 Capture Event
.equ OC1Aaddr = 0x0004 ; Timer/Counter1 Compare Match A
.equ OC1Baddr = 0x0005 ; Timer/Counter1 Compare MatchB
.equ OVF1addr = 0x0006 ; Timer/Counter1 Overflow
.equ OVF0addr = 0x0007 ; Timer/Counter0 Overflow
.equ SPIaddr = 0x0008 ; Serial Transfer Complete
.equ URXCaddr = 0x0009 ; UART, Rx Complete
.equ UDREaddr = 0x000a ; UART Data Register Empty
.equ UTXCaddr = 0x000b ; UART, Tx Complete
.equ ACIaddr = 0x000c ; Analog Comparator
.equ INT2addr = 0x000d ; External Interrupt Request 2
.equ OC0addr = 0x000e ; Timer 0 Compare Match
.equ ERDYaddr = 0x000f ; EEPROM Ready
.equ SPMRaddr = 0x0010 ; Store Program Memory Ready
.equ INT_VECTORS_SIZE = 17 ; size in words
#pragma AVRPART CORE INSTRUCTIONS_NOT_SUPPORTED break
#endif /* _M8515DEF_INC_ */
; ***** END OF FILE ******************************************************