2009-06-30 11:57:44 +02:00
/*
* Copyright 2006 - 2007 Advanced Micro Devices , Inc .
*
* Permission is hereby granted , free of charge , to any person obtaining a
* copy of this software and associated documentation files ( the " Software " ) ,
* to deal in the Software without restriction , including without limitation
* the rights to use , copy , modify , merge , publish , distribute , sublicense ,
* and / or sell copies of the Software , and to permit persons to whom the
* Software is furnished to do so , subject to the following conditions :
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software .
*
* THE SOFTWARE IS PROVIDED " AS IS " , WITHOUT WARRANTY OF ANY KIND , EXPRESS OR
* IMPLIED , INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY ,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT . IN NO EVENT SHALL
* THE COPYRIGHT HOLDER ( S ) OR AUTHOR ( S ) BE LIABLE FOR ANY CLAIM , DAMAGES OR
* OTHER LIABILITY , WHETHER IN AN ACTION OF CONTRACT , TORT OR OTHERWISE ,
* ARISING FROM , OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE .
*/
/****************************************************************************/
/*Portion I: Definitions shared between VBIOS and Driver */
/****************************************************************************/
# ifndef _ATOMBIOS_H
# define _ATOMBIOS_H
# define ATOM_VERSION_MAJOR 0x00020000
# define ATOM_VERSION_MINOR 0x00000002
# define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)
/* Endianness should be specified before inclusion,
* default to little endian
*/
# ifndef ATOM_BIG_ENDIAN
# error Endian not specified
# endif
# ifdef _H2INC
# ifndef ULONG
typedef unsigned long ULONG ;
# endif
# ifndef UCHAR
typedef unsigned char UCHAR ;
# endif
# ifndef USHORT
typedef unsigned short USHORT ;
# endif
# endif
# define ATOM_DAC_A 0
# define ATOM_DAC_B 1
# define ATOM_EXT_DAC 2
# define ATOM_CRTC1 0
# define ATOM_CRTC2 1
# define ATOM_DIGA 0
# define ATOM_DIGB 1
# define ATOM_PPLL1 0
# define ATOM_PPLL2 1
# define ATOM_SCALER1 0
# define ATOM_SCALER2 1
# define ATOM_SCALER_DISABLE 0
# define ATOM_SCALER_CENTER 1
# define ATOM_SCALER_EXPANSION 2
# define ATOM_SCALER_MULTI_EX 3
# define ATOM_DISABLE 0
# define ATOM_ENABLE 1
# define ATOM_LCD_BLOFF (ATOM_DISABLE+2)
# define ATOM_LCD_BLON (ATOM_ENABLE+2)
# define ATOM_LCD_BL_BRIGHTNESS_CONTROL (ATOM_ENABLE+3)
# define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5)
# define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5)
# define ATOM_ENCODER_INIT (ATOM_DISABLE+7)
# define ATOM_BLANKING 1
# define ATOM_BLANKING_OFF 0
# define ATOM_CURSOR1 0
# define ATOM_CURSOR2 1
# define ATOM_ICON1 0
# define ATOM_ICON2 1
# define ATOM_CRT1 0
# define ATOM_CRT2 1
# define ATOM_TV_NTSC 1
# define ATOM_TV_NTSCJ 2
# define ATOM_TV_PAL 3
# define ATOM_TV_PALM 4
# define ATOM_TV_PALCN 5
# define ATOM_TV_PALN 6
# define ATOM_TV_PAL60 7
# define ATOM_TV_SECAM 8
# define ATOM_TV_CV 16
# define ATOM_DAC1_PS2 1
# define ATOM_DAC1_CV 2
# define ATOM_DAC1_NTSC 3
# define ATOM_DAC1_PAL 4
# define ATOM_DAC2_PS2 ATOM_DAC1_PS2
# define ATOM_DAC2_CV ATOM_DAC1_CV
# define ATOM_DAC2_NTSC ATOM_DAC1_NTSC
# define ATOM_DAC2_PAL ATOM_DAC1_PAL
# define ATOM_PM_ON 0
# define ATOM_PM_STANDBY 1
# define ATOM_PM_SUSPEND 2
# define ATOM_PM_OFF 3
/* Bit0:{=0:single, =1:dual},
Bit1 { = 0 : 666 RGB , = 1 : 888 RGB } ,
Bit2 : 3 : { Grey level }
Bit4 : { = 0 : LDI format for RGB888 , = 1 FPDI format for RGB888 } */
# define ATOM_PANEL_MISC_DUAL 0x00000001
# define ATOM_PANEL_MISC_888RGB 0x00000002
# define ATOM_PANEL_MISC_GREY_LEVEL 0x0000000C
# define ATOM_PANEL_MISC_FPDI 0x00000010
# define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT 2
# define ATOM_PANEL_MISC_SPATIAL 0x00000020
# define ATOM_PANEL_MISC_TEMPORAL 0x00000040
# define ATOM_PANEL_MISC_API_ENABLED 0x00000080
# define MEMTYPE_DDR1 "DDR1"
# define MEMTYPE_DDR2 "DDR2"
# define MEMTYPE_DDR3 "DDR3"
# define MEMTYPE_DDR4 "DDR4"
# define ASIC_BUS_TYPE_PCI "PCI"
# define ASIC_BUS_TYPE_AGP "AGP"
# define ASIC_BUS_TYPE_PCIE "PCI_EXPRESS"
/* Maximum size of that FireGL flag string */
# define ATOM_FIREGL_FLAG_STRING "FGL" /* Flag used to enable FireGL Support */
# define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING 3 /* sizeof( ATOM_FIREGL_FLAG_STRING ) */
# define ATOM_FAKE_DESKTOP_STRING "DSK" /* Flag used to enable mobile ASIC on Desktop */
# define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING
# define ATOM_M54T_FLAG_STRING "M54T" /* Flag used to enable M54T Support */
# define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING 4 /* sizeof( ATOM_M54T_FLAG_STRING ) */
# define HW_ASSISTED_I2C_STATUS_FAILURE 2
# define HW_ASSISTED_I2C_STATUS_SUCCESS 1
# pragma pack(1) /* BIOS data must use byte aligment */
/* Define offset to location of ROM header. */
# define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L
# define OFFSET_TO_ATOM_ROM_IMAGE_SIZE 0x00000002L
# define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE 0x94
# define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE 20 /* including the terminator 0x0! */
# define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER 0x002f
# define OFFSET_TO_GET_ATOMBIOS_STRINGS_START 0x006e
/* Common header for all ROM Data tables.
Every table pointed _ATOM_MASTER_DATA_TABLE has this common header .
And the pointer actually points to this header . */
typedef struct _ATOM_COMMON_TABLE_HEADER {
USHORT usStructureSize ;
UCHAR ucTableFormatRevision ; /*Change it when the Parser is not backward compatible */
UCHAR ucTableContentRevision ; /*Change it only when the table needs to change but the firmware */
/*Image can't be updated, while Driver needs to carry the new table! */
} ATOM_COMMON_TABLE_HEADER ;
typedef struct _ATOM_ROM_HEADER {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR uaFirmWareSignature [ 4 ] ; /*Signature to distinguish between Atombios and non-atombios,
atombios should init it as " ATOM " , don ' t change the position */
USHORT usBiosRuntimeSegmentAddress ;
USHORT usProtectedModeInfoOffset ;
USHORT usConfigFilenameOffset ;
USHORT usCRC_BlockOffset ;
USHORT usBIOS_BootupMessageOffset ;
USHORT usInt10Offset ;
USHORT usPciBusDevInitCode ;
USHORT usIoBaseAddress ;
USHORT usSubsystemVendorID ;
USHORT usSubsystemID ;
USHORT usPCI_InfoOffset ;
USHORT usMasterCommandTableOffset ; /*Offset for SW to get all command table offsets, Don't change the position */
USHORT usMasterDataTableOffset ; /*Offset for SW to get all data table offsets, Don't change the position */
UCHAR ucExtendedFunctionCode ;
UCHAR ucReserved ;
} ATOM_ROM_HEADER ;
/*==============================Command Table Portion==================================== */
# ifdef UEFI_BUILD
# define UTEMP USHORT
# define USHORT void*
# endif
typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES {
USHORT ASIC_Init ; /* Function Table, used by various SW components,latest version 1.1 */
USHORT GetDisplaySurfaceSize ; /* Atomic Table, Used by Bios when enabling HW ICON */
USHORT ASIC_RegistersInit ; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */
USHORT VRAM_BlockVenderDetection ; /* Atomic Table, used only by Bios */
USHORT DIGxEncoderControl ; /* Only used by Bios */
USHORT MemoryControllerInit ; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */
USHORT EnableCRTCMemReq ; /* Function Table,directly used by various SW components,latest version 2.1 */
USHORT MemoryParamAdjust ; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock if needed */
USHORT DVOEncoderControl ; /* Function Table,directly used by various SW components,latest version 1.2 */
USHORT GPIOPinControl ; /* Atomic Table, only used by Bios */
USHORT SetEngineClock ; /*Function Table,directly used by various SW components,latest version 1.1 */
USHORT SetMemoryClock ; /* Function Table,directly used by various SW components,latest version 1.1 */
USHORT SetPixelClock ; /*Function Table,directly used by various SW components,latest version 1.2 */
USHORT DynamicClockGating ; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */
USHORT ResetMemoryDLL ; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
USHORT ResetMemoryDevice ; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
USHORT MemoryPLLInit ;
USHORT AdjustDisplayPll ; /* only used by Bios */
USHORT AdjustMemoryController ; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
USHORT EnableASIC_StaticPwrMgt ; /* Atomic Table, only used by Bios */
USHORT ASIC_StaticPwrMgtStatusChange ; /* Obsolete, only used by Bios */
USHORT DAC_LoadDetection ; /* Atomic Table, directly used by various SW components,latest version 1.2 */
USHORT LVTMAEncoderControl ; /* Atomic Table,directly used by various SW components,latest version 1.3 */
USHORT LCD1OutputControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT DAC1EncoderControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT DAC2EncoderControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT DVOOutputControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT CV1OutputControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT GetConditionalGoldenSetting ; /* only used by Bios */
USHORT TVEncoderControl ; /* Function Table,directly used by various SW components,latest version 1.1 */
USHORT TMDSAEncoderControl ; /* Atomic Table, directly used by various SW components,latest version 1.3 */
USHORT LVDSEncoderControl ; /* Atomic Table, directly used by various SW components,latest version 1.3 */
USHORT TV1OutputControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT EnableScaler ; /* Atomic Table, used only by Bios */
USHORT BlankCRTC ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT EnableCRTC ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT GetPixelClock ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT EnableVGA_Render ; /* Function Table,directly used by various SW components,latest version 1.1 */
USHORT EnableVGA_Access ; /* Obsolete , only used by Bios */
USHORT SetCRTC_Timing ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT SetCRTC_OverScan ; /* Atomic Table, used by various SW components,latest version 1.1 */
USHORT SetCRTC_Replication ; /* Atomic Table, used only by Bios */
USHORT SelectCRTC_Source ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT EnableGraphSurfaces ; /* Atomic Table, used only by Bios */
USHORT UpdateCRTC_DoubleBufferRegisters ;
USHORT LUT_AutoFill ; /* Atomic Table, only used by Bios */
USHORT EnableHW_IconCursor ; /* Atomic Table, only used by Bios */
USHORT GetMemoryClock ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT GetEngineClock ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT SetCRTC_UsingDTDTiming ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT ExternalEncoderControl ; /* Atomic Table, directly used by various SW components,latest version 2.1 */
USHORT LVTMAOutputControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT VRAM_BlockDetectionByStrap ; /* Atomic Table, used only by Bios */
USHORT MemoryCleanUp ; /* Atomic Table, only used by Bios */
USHORT ProcessI2cChannelTransaction ; /* Function Table,only used by Bios */
USHORT WriteOneByteToHWAssistedI2C ; /* Function Table,indirectly used by various SW components */
USHORT ReadHWAssistedI2CStatus ; /* Atomic Table, indirectly used by various SW components */
USHORT SpeedFanControl ; /* Function Table,indirectly used by various SW components,called from ASIC_Init */
USHORT PowerConnectorDetection ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT MC_Synchronization ; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
USHORT ComputeMemoryEnginePLL ; /* Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock */
USHORT MemoryRefreshConversion ; /* Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock */
USHORT VRAM_GetCurrentInfoBlock ; /* Atomic Table, used only by Bios */
USHORT DynamicMemorySettings ; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
USHORT MemoryTraining ; /* Atomic Table, used only by Bios */
USHORT EnableSpreadSpectrumOnPPLL ; /* Atomic Table, directly used by various SW components,latest version 1.2 */
USHORT TMDSAOutputControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT SetVoltage ; /* Function Table,directly and/or indirectly used by various SW components,latest version 1.1 */
USHORT DAC1OutputControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT DAC2OutputControl ; /* Atomic Table, directly used by various SW components,latest version 1.1 */
USHORT SetupHWAssistedI2CStatus ; /* Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" */
USHORT ClockSource ; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */
USHORT MemoryDeviceInit ; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */
USHORT EnableYUV ; /* Atomic Table, indirectly used by various SW components,called from EnableVGARender */
USHORT DIG1EncoderControl ; /* Atomic Table,directly used by various SW components,latest version 1.1 */
USHORT DIG2EncoderControl ; /* Atomic Table,directly used by various SW components,latest version 1.1 */
USHORT DIG1TransmitterControl ; /* Atomic Table,directly used by various SW components,latest version 1.1 */
USHORT DIG2TransmitterControl ; /* Atomic Table,directly used by various SW components,latest version 1.1 */
USHORT ProcessAuxChannelTransaction ; /* Function Table,only used by Bios */
USHORT DPEncoderService ; /* Function Table,only used by Bios */
} ATOM_MASTER_LIST_OF_COMMAND_TABLES ;
/* For backward compatible */
# define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction
# define UNIPHYTransmitterControl DIG1TransmitterControl
# define LVTMATransmitterControl DIG2TransmitterControl
# define SetCRTC_DPM_State GetConditionalGoldenSetting
# define SetUniphyInstance ASIC_StaticPwrMgtStatusChange
typedef struct _ATOM_MASTER_COMMAND_TABLE {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables ;
} ATOM_MASTER_COMMAND_TABLE ;
/****************************************************************************/
/* Structures used in every command table */
/****************************************************************************/
typedef struct _ATOM_TABLE_ATTRIBUTE {
# if ATOM_BIG_ENDIAN
USHORT UpdatedByUtility : 1 ; /* [15]=Table updated by utility flag */
USHORT PS_SizeInBytes : 7 ; /* [14:8]=Size of parameter space in Bytes (multiple of a dword), */
USHORT WS_SizeInBytes : 8 ; /* [7:0]=Size of workspace in Bytes (in multiple of a dword), */
# else
USHORT WS_SizeInBytes : 8 ; /* [7:0]=Size of workspace in Bytes (in multiple of a dword), */
USHORT PS_SizeInBytes : 7 ; /* [14:8]=Size of parameter space in Bytes (multiple of a dword), */
USHORT UpdatedByUtility : 1 ; /* [15]=Table updated by utility flag */
# endif
} ATOM_TABLE_ATTRIBUTE ;
typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS {
ATOM_TABLE_ATTRIBUTE sbfAccess ;
USHORT susAccess ;
} ATOM_TABLE_ATTRIBUTE_ACCESS ;
/****************************************************************************/
/* Common header for all command tables. */
/* Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header. */
/* And the pointer actually points to this header. */
/****************************************************************************/
typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER {
ATOM_COMMON_TABLE_HEADER CommonHeader ;
ATOM_TABLE_ATTRIBUTE TableAttribute ;
} ATOM_COMMON_ROM_COMMAND_TABLE_HEADER ;
/****************************************************************************/
/* Structures used by ComputeMemoryEnginePLLTable */
/****************************************************************************/
# define COMPUTE_MEMORY_PLL_PARAM 1
# define COMPUTE_ENGINE_PLL_PARAM 2
typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS {
ULONG ulClock ; /* When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div */
UCHAR ucAction ; /* 0:reserved //1:Memory //2:Engine */
UCHAR ucReserved ; /* may expand to return larger Fbdiv later */
UCHAR ucFbDiv ; /* return value */
UCHAR ucPostDiv ; /* return value */
} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS ;
typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 {
ULONG ulClock ; /* When return, [23:0] return real clock */
UCHAR ucAction ; /* 0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register */
USHORT usFbDiv ; /* return Feedback value to be written to register */
UCHAR ucPostDiv ; /* return post div to be written to register */
} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 ;
# define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
# define SET_CLOCK_FREQ_MASK 0x00FFFFFF /* Clock change tables only take bit [23:0] as the requested clock value */
# define USE_NON_BUS_CLOCK_MASK 0x01000000 /* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */
# define USE_MEMORY_SELF_REFRESH_MASK 0x02000000 /* Only applicable to memory clock change, when set, using memory self refresh during clock transition */
# define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04000000 /* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */
# define FIRST_TIME_CHANGE_CLOCK 0x08000000 /* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */
# define SKIP_SW_PROGRAM_PLL 0x10000000 /* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */
# define USE_SS_ENABLED_PIXEL_CLOCK USE_NON_BUS_CLOCK_MASK
# define b3USE_NON_BUS_CLOCK_MASK 0x01 /* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */
# define b3USE_MEMORY_SELF_REFRESH 0x02 /* Only applicable to memory clock change, when set, using memory self refresh during clock transition */
# define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04 /* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */
# define b3FIRST_TIME_CHANGE_CLOCK 0x08 /* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */
# define b3SKIP_SW_PROGRAM_PLL 0x10 /* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */
typedef struct _ATOM_COMPUTE_CLOCK_FREQ {
# if ATOM_BIG_ENDIAN
ULONG ulComputeClockFlag : 8 ; /* =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */
ULONG ulClockFreq : 24 ; /* in unit of 10kHz */
# else
ULONG ulClockFreq : 24 ; /* in unit of 10kHz */
ULONG ulComputeClockFlag : 8 ; /* =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */
# endif
} ATOM_COMPUTE_CLOCK_FREQ ;
typedef struct _ATOM_S_MPLL_FB_DIVIDER {
USHORT usFbDivFrac ;
USHORT usFbDiv ;
} ATOM_S_MPLL_FB_DIVIDER ;
typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 {
union {
ATOM_COMPUTE_CLOCK_FREQ ulClock ; /* Input Parameter */
ATOM_S_MPLL_FB_DIVIDER ulFbDiv ; /* Output Parameter */
} ;
UCHAR ucRefDiv ; /* Output Parameter */
UCHAR ucPostDiv ; /* Output Parameter */
UCHAR ucCntlFlag ; /* Output Parameter */
UCHAR ucReserved ;
} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 ;
/* ucCntlFlag */
# define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1
# define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2
# define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4
typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER {
ATOM_COMPUTE_CLOCK_FREQ ulClock ;
ULONG ulReserved [ 2 ] ;
} DYNAMICE_MEMORY_SETTINGS_PARAMETER ;
typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER {
ATOM_COMPUTE_CLOCK_FREQ ulClock ;
ULONG ulMemoryClock ;
ULONG ulReserved ;
} DYNAMICE_ENGINE_SETTINGS_PARAMETER ;
/****************************************************************************/
/* Structures used by SetEngineClockTable */
/****************************************************************************/
typedef struct _SET_ENGINE_CLOCK_PARAMETERS {
ULONG ulTargetEngineClock ; /* In 10Khz unit */
} SET_ENGINE_CLOCK_PARAMETERS ;
typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION {
ULONG ulTargetEngineClock ; /* In 10Khz unit */
COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved ;
} SET_ENGINE_CLOCK_PS_ALLOCATION ;
/****************************************************************************/
/* Structures used by SetMemoryClockTable */
/****************************************************************************/
typedef struct _SET_MEMORY_CLOCK_PARAMETERS {
ULONG ulTargetMemoryClock ; /* In 10Khz unit */
} SET_MEMORY_CLOCK_PARAMETERS ;
typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION {
ULONG ulTargetMemoryClock ; /* In 10Khz unit */
COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved ;
} SET_MEMORY_CLOCK_PS_ALLOCATION ;
/****************************************************************************/
/* Structures used by ASIC_Init.ctb */
/****************************************************************************/
typedef struct _ASIC_INIT_PARAMETERS {
ULONG ulDefaultEngineClock ; /* In 10Khz unit */
ULONG ulDefaultMemoryClock ; /* In 10Khz unit */
} ASIC_INIT_PARAMETERS ;
typedef struct _ASIC_INIT_PS_ALLOCATION {
ASIC_INIT_PARAMETERS sASICInitClocks ;
SET_ENGINE_CLOCK_PS_ALLOCATION sReserved ; /* Caller doesn't need to init this structure */
} ASIC_INIT_PS_ALLOCATION ;
/****************************************************************************/
/* Structure used by DynamicClockGatingTable.ctb */
/****************************************************************************/
typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS {
UCHAR ucEnable ; /* ATOM_ENABLE or ATOM_DISABLE */
UCHAR ucPadding [ 3 ] ;
} DYNAMIC_CLOCK_GATING_PARAMETERS ;
# define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS
/****************************************************************************/
/* Structure used by EnableASIC_StaticPwrMgtTable.ctb */
/****************************************************************************/
typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS {
UCHAR ucEnable ; /* ATOM_ENABLE or ATOM_DISABLE */
UCHAR ucPadding [ 3 ] ;
} ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS ;
# define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
/****************************************************************************/
/* Structures used by DAC_LoadDetectionTable.ctb */
/****************************************************************************/
typedef struct _DAC_LOAD_DETECTION_PARAMETERS {
USHORT usDeviceID ; /* {ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT} */
UCHAR ucDacType ; /* {ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC} */
UCHAR ucMisc ; /* Valid only when table revision =1.3 and above */
} DAC_LOAD_DETECTION_PARAMETERS ;
/* DAC_LOAD_DETECTION_PARAMETERS.ucMisc */
# define DAC_LOAD_MISC_YPrPb 0x01
typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION {
DAC_LOAD_DETECTION_PARAMETERS sDacload ;
ULONG Reserved [ 2 ] ; /* Don't set this one, allocation for EXT DAC */
} DAC_LOAD_DETECTION_PS_ALLOCATION ;
/****************************************************************************/
/* Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb */
/****************************************************************************/
typedef struct _DAC_ENCODER_CONTROL_PARAMETERS {
USHORT usPixelClock ; /* in 10KHz; for bios convenient */
UCHAR ucDacStandard ; /* See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0) */
UCHAR ucAction ; /* 0: turn off encoder */
/* 1: setup and turn on encoder */
/* 7: ATOM_ENCODER_INIT Initialize DAC */
} DAC_ENCODER_CONTROL_PARAMETERS ;
# define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS
/****************************************************************************/
/* Structures used by DIG1EncoderControlTable */
/* DIG2EncoderControlTable */
/* ExternalEncoderControlTable */
/****************************************************************************/
typedef struct _DIG_ENCODER_CONTROL_PARAMETERS {
USHORT usPixelClock ; /* in 10KHz; for bios convenient */
UCHAR ucConfig ;
/* [2] Link Select: */
/* =0: PHY linkA if bfLane<3 */
/* =1: PHY linkB if bfLanes<3 */
/* =0: PHY linkA+B if bfLanes=3 */
/* [3] Transmitter Sel */
/* =0: UNIPHY or PCIEPHY */
/* =1: LVTMA */
UCHAR ucAction ; /* =0: turn off encoder */
/* =1: turn on encoder */
UCHAR ucEncoderMode ;
/* =0: DP encoder */
/* =1: LVDS encoder */
/* =2: DVI encoder */
/* =3: HDMI encoder */
/* =4: SDVO encoder */
UCHAR ucLaneNum ; /* how many lanes to enable */
UCHAR ucReserved [ 2 ] ;
} DIG_ENCODER_CONTROL_PARAMETERS ;
# define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS
# define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS
/* ucConfig */
# define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01
# define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00
# define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01
# define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04
# define ATOM_ENCODER_CONFIG_LINKA 0x00
# define ATOM_ENCODER_CONFIG_LINKB 0x04
# define ATOM_ENCODER_CONFIG_LINKA_B ATOM_TRANSMITTER_CONFIG_LINKA
# define ATOM_ENCODER_CONFIG_LINKB_A ATOM_ENCODER_CONFIG_LINKB
# define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK 0x08
# define ATOM_ENCODER_CONFIG_UNIPHY 0x00
# define ATOM_ENCODER_CONFIG_LVTMA 0x08
# define ATOM_ENCODER_CONFIG_TRANSMITTER1 0x00
# define ATOM_ENCODER_CONFIG_TRANSMITTER2 0x08
# define ATOM_ENCODER_CONFIG_DIGB 0x80 /* VBIOS Internal use, outside SW should set this bit=0 */
/* ucAction */
/* ATOM_ENABLE: Enable Encoder */
/* ATOM_DISABLE: Disable Encoder */
/* ucEncoderMode */
# define ATOM_ENCODER_MODE_DP 0
# define ATOM_ENCODER_MODE_LVDS 1
# define ATOM_ENCODER_MODE_DVI 2
# define ATOM_ENCODER_MODE_HDMI 3
# define ATOM_ENCODER_MODE_SDVO 4
# define ATOM_ENCODER_MODE_TV 13
# define ATOM_ENCODER_MODE_CV 14
# define ATOM_ENCODER_MODE_CRT 15
typedef struct _ATOM_DIG_ENCODER_CONFIG_V2 {
# if ATOM_BIG_ENDIAN
UCHAR ucReserved1 : 2 ;
UCHAR ucTransmitterSel : 2 ; /* =0: UniphyAB, =1: UniphyCD =2: UniphyEF */
UCHAR ucLinkSel : 1 ; /* =0: linkA/C/E =1: linkB/D/F */
UCHAR ucReserved : 1 ;
UCHAR ucDPLinkRate : 1 ; /* =0: 1.62Ghz, =1: 2.7Ghz */
# else
UCHAR ucDPLinkRate : 1 ; /* =0: 1.62Ghz, =1: 2.7Ghz */
UCHAR ucReserved : 1 ;
UCHAR ucLinkSel : 1 ; /* =0: linkA/C/E =1: linkB/D/F */
UCHAR ucTransmitterSel : 2 ; /* =0: UniphyAB, =1: UniphyCD =2: UniphyEF */
UCHAR ucReserved1 : 2 ;
# endif
} ATOM_DIG_ENCODER_CONFIG_V2 ;
typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 {
USHORT usPixelClock ; /* in 10KHz; for bios convenient */
ATOM_DIG_ENCODER_CONFIG_V2 acConfig ;
UCHAR ucAction ;
UCHAR ucEncoderMode ;
/* =0: DP encoder */
/* =1: LVDS encoder */
/* =2: DVI encoder */
/* =3: HDMI encoder */
/* =4: SDVO encoder */
UCHAR ucLaneNum ; /* how many lanes to enable */
UCHAR ucReserved [ 2 ] ;
} DIG_ENCODER_CONTROL_PARAMETERS_V2 ;
/* ucConfig */
# define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01
# define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00
# define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01
# define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04
# define ATOM_ENCODER_CONFIG_V2_LINKA 0x00
# define ATOM_ENCODER_CONFIG_V2_LINKB 0x04
# define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18
# define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00
# define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08
# define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10
/****************************************************************************/
/* Structures used by UNIPHYTransmitterControlTable */
/* LVTMATransmitterControlTable */
/* DVOOutputControlTable */
/****************************************************************************/
typedef struct _ATOM_DP_VS_MODE {
UCHAR ucLaneSel ;
UCHAR ucLaneSet ;
} ATOM_DP_VS_MODE ;
typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS {
union {
USHORT usPixelClock ; /* in 10KHz; for bios convenient */
USHORT usInitInfo ; /* when init uniphy,lower 8bit is used for connector type defined in objectid.h */
ATOM_DP_VS_MODE asMode ; /* DP Voltage swing mode */
} ;
UCHAR ucConfig ;
/* [0]=0: 4 lane Link, */
/* =1: 8 lane Link ( Dual Links TMDS ) */
/* [1]=0: InCoherent mode */
/* =1: Coherent Mode */
/* [2] Link Select: */
/* =0: PHY linkA if bfLane<3 */
/* =1: PHY linkB if bfLanes<3 */
/* =0: PHY linkA+B if bfLanes=3 */
/* [5:4]PCIE lane Sel */
/* =0: lane 0~3 or 0~7 */
/* =1: lane 4~7 */
/* =2: lane 8~11 or 8~15 */
/* =3: lane 12~15 */
UCHAR ucAction ; /* =0: turn off encoder */
/* =1: turn on encoder */
UCHAR ucReserved [ 4 ] ;
} DIG_TRANSMITTER_CONTROL_PARAMETERS ;
# define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PARAMETERS
/* ucInitInfo */
# define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK 0x00ff
/* ucConfig */
# define ATOM_TRANSMITTER_CONFIG_8LANE_LINK 0x01
# define ATOM_TRANSMITTER_CONFIG_COHERENT 0x02
# define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK 0x04
# define ATOM_TRANSMITTER_CONFIG_LINKA 0x00
# define ATOM_TRANSMITTER_CONFIG_LINKB 0x04
# define ATOM_TRANSMITTER_CONFIG_LINKA_B 0x00
# define ATOM_TRANSMITTER_CONFIG_LINKB_A 0x04
# define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK 0x08 /* only used when ATOM_TRANSMITTER_ACTION_ENABLE */
# define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER 0x00 /* only used when ATOM_TRANSMITTER_ACTION_ENABLE */
# define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER 0x08 /* only used when ATOM_TRANSMITTER_ACTION_ENABLE */
# define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK 0x30
# define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL 0x00
# define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE 0x20
# define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN 0x30
# define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK 0xc0
# define ATOM_TRANSMITTER_CONFIG_LANE_0_3 0x00
# define ATOM_TRANSMITTER_CONFIG_LANE_0_7 0x00
# define ATOM_TRANSMITTER_CONFIG_LANE_4_7 0x40
# define ATOM_TRANSMITTER_CONFIG_LANE_8_11 0x80
# define ATOM_TRANSMITTER_CONFIG_LANE_8_15 0x80
# define ATOM_TRANSMITTER_CONFIG_LANE_12_15 0xc0
/* ucAction */
# define ATOM_TRANSMITTER_ACTION_DISABLE 0
# define ATOM_TRANSMITTER_ACTION_ENABLE 1
# define ATOM_TRANSMITTER_ACTION_LCD_BLOFF 2
# define ATOM_TRANSMITTER_ACTION_LCD_BLON 3
# define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL 4
# define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START 5
# define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP 6
# define ATOM_TRANSMITTER_ACTION_INIT 7
# define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT 8
# define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT 9
# define ATOM_TRANSMITTER_ACTION_SETUP 10
# define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11
/* Following are used for DigTransmitterControlTable ver1.2 */
typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2 {
# if ATOM_BIG_ENDIAN
UCHAR ucTransmitterSel : 2 ; /* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */
/* =1 Dig Transmitter 2 ( Uniphy CD ) */
/* =2 Dig Transmitter 3 ( Uniphy EF ) */
UCHAR ucReserved : 1 ;
UCHAR fDPConnector : 1 ; /* bit4=0: DP connector =1: None DP connector */
UCHAR ucEncoderSel : 1 ; /* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */
UCHAR ucLinkSel : 1 ; /* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */
/* =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */
UCHAR fCoherentMode : 1 ; /* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */
UCHAR fDualLinkConnector : 1 ; /* bit0=1: Dual Link DVI connector */
# else
UCHAR fDualLinkConnector : 1 ; /* bit0=1: Dual Link DVI connector */
UCHAR fCoherentMode : 1 ; /* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */
UCHAR ucLinkSel : 1 ; /* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */
/* =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */
UCHAR ucEncoderSel : 1 ; /* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */
UCHAR fDPConnector : 1 ; /* bit4=0: DP connector =1: None DP connector */
UCHAR ucReserved : 1 ;
UCHAR ucTransmitterSel : 2 ; /* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */
/* =1 Dig Transmitter 2 ( Uniphy CD ) */
/* =2 Dig Transmitter 3 ( Uniphy EF ) */
# endif
} ATOM_DIG_TRANSMITTER_CONFIG_V2 ;
/* ucConfig */
/* Bit0 */
# define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01
/* Bit1 */
# define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02
/* Bit2 */
# define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04
# define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00
# define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04
/* Bit3 */
# define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08
# define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 /* only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */
# define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 /* only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */
/* Bit4 */
# define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10
/* Bit7:6 */
# define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0
# define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 /* AB */
# define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 /* CD */
# define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 /* EF */
typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 {
union {
USHORT usPixelClock ; /* in 10KHz; for bios convenient */
USHORT usInitInfo ; /* when init uniphy,lower 8bit is used for connector type defined in objectid.h */
ATOM_DP_VS_MODE asMode ; /* DP Voltage swing mode */
} ;
ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig ;
UCHAR ucAction ; /* define as ATOM_TRANSMITER_ACTION_XXX */
UCHAR ucReserved [ 4 ] ;
} DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 ;
/****************************************************************************/
/* Structures used by DAC1OuputControlTable */
/* DAC2OuputControlTable */
/* LVTMAOutputControlTable (Before DEC30) */
/* TMDSAOutputControlTable (Before DEC30) */
/****************************************************************************/
typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS {
UCHAR ucAction ; /* Possible input:ATOM_ENABLE||ATOMDISABLE */
/* When the display is LCD, in addition to above: */
/* ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START|| */
/* ATOM_LCD_SELFTEST_STOP */
UCHAR aucPadding [ 3 ] ; /* padding to DWORD aligned */
} DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS ;
# define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define CRT1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define CRT1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define CRT2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define CRT2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define CV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define CV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define TV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define TV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define DFP1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define DFP1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define DFP2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define DFP2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define LCD1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define LCD1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define DVO_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
# define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS
/****************************************************************************/
/* Structures used by BlankCRTCTable */
/****************************************************************************/
typedef struct _BLANK_CRTC_PARAMETERS {
UCHAR ucCRTC ; /* ATOM_CRTC1 or ATOM_CRTC2 */
UCHAR ucBlanking ; /* ATOM_BLANKING or ATOM_BLANKINGOFF */
USHORT usBlackColorRCr ;
USHORT usBlackColorGY ;
USHORT usBlackColorBCb ;
} BLANK_CRTC_PARAMETERS ;
# define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS
/****************************************************************************/
/* Structures used by EnableCRTCTable */
/* EnableCRTCMemReqTable */
/* UpdateCRTC_DoubleBufferRegistersTable */
/****************************************************************************/
typedef struct _ENABLE_CRTC_PARAMETERS {
UCHAR ucCRTC ; /* ATOM_CRTC1 or ATOM_CRTC2 */
UCHAR ucEnable ; /* ATOM_ENABLE or ATOM_DISABLE */
UCHAR ucPadding [ 2 ] ;
} ENABLE_CRTC_PARAMETERS ;
# define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS
/****************************************************************************/
/* Structures used by SetCRTC_OverScanTable */
/****************************************************************************/
typedef struct _SET_CRTC_OVERSCAN_PARAMETERS {
USHORT usOverscanRight ; /* right */
USHORT usOverscanLeft ; /* left */
USHORT usOverscanBottom ; /* bottom */
USHORT usOverscanTop ; /* top */
UCHAR ucCRTC ; /* ATOM_CRTC1 or ATOM_CRTC2 */
UCHAR ucPadding [ 3 ] ;
} SET_CRTC_OVERSCAN_PARAMETERS ;
# define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS
/****************************************************************************/
/* Structures used by SetCRTC_ReplicationTable */
/****************************************************************************/
typedef struct _SET_CRTC_REPLICATION_PARAMETERS {
UCHAR ucH_Replication ; /* horizontal replication */
UCHAR ucV_Replication ; /* vertical replication */
UCHAR usCRTC ; /* ATOM_CRTC1 or ATOM_CRTC2 */
UCHAR ucPadding ;
} SET_CRTC_REPLICATION_PARAMETERS ;
# define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS
/****************************************************************************/
/* Structures used by SelectCRTC_SourceTable */
/****************************************************************************/
typedef struct _SELECT_CRTC_SOURCE_PARAMETERS {
UCHAR ucCRTC ; /* ATOM_CRTC1 or ATOM_CRTC2 */
UCHAR ucDevice ; /* ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|.... */
UCHAR ucPadding [ 2 ] ;
} SELECT_CRTC_SOURCE_PARAMETERS ;
# define SELECT_CRTC_SOURCE_PS_ALLOCATION SELECT_CRTC_SOURCE_PARAMETERS
typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2 {
UCHAR ucCRTC ; /* ATOM_CRTC1 or ATOM_CRTC2 */
UCHAR ucEncoderID ; /* DAC1/DAC2/TVOUT/DIG1/DIG2/DVO */
UCHAR ucEncodeMode ; /* Encoding mode, only valid when using DIG1/DIG2/DVO */
UCHAR ucPadding ;
} SELECT_CRTC_SOURCE_PARAMETERS_V2 ;
/* ucEncoderID */
/* #define ASIC_INT_DAC1_ENCODER_ID 0x00 */
/* #define ASIC_INT_TV_ENCODER_ID 0x02 */
/* #define ASIC_INT_DIG1_ENCODER_ID 0x03 */
/* #define ASIC_INT_DAC2_ENCODER_ID 0x04 */
/* #define ASIC_EXT_TV_ENCODER_ID 0x06 */
/* #define ASIC_INT_DVO_ENCODER_ID 0x07 */
/* #define ASIC_INT_DIG2_ENCODER_ID 0x09 */
/* #define ASIC_EXT_DIG_ENCODER_ID 0x05 */
/* ucEncodeMode */
/* #define ATOM_ENCODER_MODE_DP 0 */
/* #define ATOM_ENCODER_MODE_LVDS 1 */
/* #define ATOM_ENCODER_MODE_DVI 2 */
/* #define ATOM_ENCODER_MODE_HDMI 3 */
/* #define ATOM_ENCODER_MODE_SDVO 4 */
/* #define ATOM_ENCODER_MODE_TV 13 */
/* #define ATOM_ENCODER_MODE_CV 14 */
/* #define ATOM_ENCODER_MODE_CRT 15 */
/****************************************************************************/
/* Structures used by SetPixelClockTable */
/* GetPixelClockTable */
/****************************************************************************/
/* Major revision=1., Minor revision=1 */
typedef struct _PIXEL_CLOCK_PARAMETERS {
USHORT usPixelClock ; /* in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
/* 0 means disable PPLL */
USHORT usRefDiv ; /* Reference divider */
USHORT usFbDiv ; /* feedback divider */
UCHAR ucPostDiv ; /* post divider */
UCHAR ucFracFbDiv ; /* fractional feedback divider */
UCHAR ucPpll ; /* ATOM_PPLL1 or ATOM_PPL2 */
UCHAR ucRefDivSrc ; /* ATOM_PJITTER or ATO_NONPJITTER */
UCHAR ucCRTC ; /* Which CRTC uses this Ppll */
UCHAR ucPadding ;
} PIXEL_CLOCK_PARAMETERS ;
/* Major revision=1., Minor revision=2, add ucMiscIfno */
/* ucMiscInfo: */
# define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
# define MISC_DEVICE_INDEX_MASK 0xF0
# define MISC_DEVICE_INDEX_SHIFT 4
typedef struct _PIXEL_CLOCK_PARAMETERS_V2 {
USHORT usPixelClock ; /* in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
/* 0 means disable PPLL */
USHORT usRefDiv ; /* Reference divider */
USHORT usFbDiv ; /* feedback divider */
UCHAR ucPostDiv ; /* post divider */
UCHAR ucFracFbDiv ; /* fractional feedback divider */
UCHAR ucPpll ; /* ATOM_PPLL1 or ATOM_PPL2 */
UCHAR ucRefDivSrc ; /* ATOM_PJITTER or ATO_NONPJITTER */
UCHAR ucCRTC ; /* Which CRTC uses this Ppll */
UCHAR ucMiscInfo ; /* Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog */
} PIXEL_CLOCK_PARAMETERS_V2 ;
/* Major revision=1., Minor revision=3, structure/definition change */
/* ucEncoderMode: */
/* ATOM_ENCODER_MODE_DP */
/* ATOM_ENOCDER_MODE_LVDS */
/* ATOM_ENOCDER_MODE_DVI */
/* ATOM_ENOCDER_MODE_HDMI */
/* ATOM_ENOCDER_MODE_SDVO */
/* ATOM_ENCODER_MODE_TV 13 */
/* ATOM_ENCODER_MODE_CV 14 */
/* ATOM_ENCODER_MODE_CRT 15 */
/* ucDVOConfig */
/* #define DVO_ENCODER_CONFIG_RATE_SEL 0x01 */
/* #define DVO_ENCODER_CONFIG_DDR_SPEED 0x00 */
/* #define DVO_ENCODER_CONFIG_SDR_SPEED 0x01 */
/* #define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c */
/* #define DVO_ENCODER_CONFIG_LOW12BIT 0x00 */
/* #define DVO_ENCODER_CONFIG_UPPER12BIT 0x04 */
/* #define DVO_ENCODER_CONFIG_24BIT 0x08 */
/* ucMiscInfo: also changed, see below */
# define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL 0x01
# define PIXEL_CLOCK_MISC_VGA_MODE 0x02
# define PIXEL_CLOCK_MISC_CRTC_SEL_MASK 0x04
# define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1 0x00
# define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2 0x04
# define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK 0x08
typedef struct _PIXEL_CLOCK_PARAMETERS_V3 {
USHORT usPixelClock ; /* in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
/* 0 means disable PPLL. For VGA PPLL,make sure this value is not 0. */
USHORT usRefDiv ; /* Reference divider */
USHORT usFbDiv ; /* feedback divider */
UCHAR ucPostDiv ; /* post divider */
UCHAR ucFracFbDiv ; /* fractional feedback divider */
UCHAR ucPpll ; /* ATOM_PPLL1 or ATOM_PPL2 */
UCHAR ucTransmitterId ; /* graphic encoder id defined in objectId.h */
union {
UCHAR ucEncoderMode ; /* encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/ */
UCHAR ucDVOConfig ; /* when use DVO, need to know SDR/DDR, 12bit or 24bit */
} ;
UCHAR ucMiscInfo ; /* bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel */
/* bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source */
} PIXEL_CLOCK_PARAMETERS_V3 ;
# define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2
# define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST
/****************************************************************************/
/* Structures used by AdjustDisplayPllTable */
/****************************************************************************/
typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS {
USHORT usPixelClock ;
UCHAR ucTransmitterID ;
UCHAR ucEncodeMode ;
union {
UCHAR ucDVOConfig ; /* if DVO, need passing link rate and output 12bitlow or 24bit */
UCHAR ucConfig ; /* if none DVO, not defined yet */
} ;
UCHAR ucReserved [ 3 ] ;
} ADJUST_DISPLAY_PLL_PARAMETERS ;
# define ADJUST_DISPLAY_CONFIG_SS_ENABLE 0x10
# define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS
/****************************************************************************/
/* Structures used by EnableYUVTable */
/****************************************************************************/
typedef struct _ENABLE_YUV_PARAMETERS {
UCHAR ucEnable ; /* ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB) */
UCHAR ucCRTC ; /* Which CRTC needs this YUV or RGB format */
UCHAR ucPadding [ 2 ] ;
} ENABLE_YUV_PARAMETERS ;
# define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS
/****************************************************************************/
/* Structures used by GetMemoryClockTable */
/****************************************************************************/
typedef struct _GET_MEMORY_CLOCK_PARAMETERS {
ULONG ulReturnMemoryClock ; /* current memory speed in 10KHz unit */
} GET_MEMORY_CLOCK_PARAMETERS ;
# define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS
/****************************************************************************/
/* Structures used by GetEngineClockTable */
/****************************************************************************/
typedef struct _GET_ENGINE_CLOCK_PARAMETERS {
ULONG ulReturnEngineClock ; /* current engine speed in 10KHz unit */
} GET_ENGINE_CLOCK_PARAMETERS ;
# define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS
/****************************************************************************/
/* Following Structures and constant may be obsolete */
/****************************************************************************/
/* Maxium 8 bytes,the data read in will be placed in the parameter space. */
/* Read operaion successeful when the paramter space is non-zero, otherwise read operation failed */
typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS {
USHORT usPrescale ; /* Ratio between Engine clock and I2C clock */
USHORT usVRAMAddress ; /* Adress in Frame Buffer where to pace raw EDID */
USHORT usStatus ; /* When use output: lower byte EDID checksum, high byte hardware status */
/* WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte */
UCHAR ucSlaveAddr ; /* Read from which slave */
UCHAR ucLineNumber ; /* Read from which HW assisted line */
} READ_EDID_FROM_HW_I2C_DATA_PARAMETERS ;
# define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
# define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE 0
# define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES 1
# define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK 2
# define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK 3
# define ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK 4
typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS {
USHORT usPrescale ; /* Ratio between Engine clock and I2C clock */
USHORT usByteOffset ; /* Write to which byte */
/* Upper portion of usByteOffset is Format of data */
/* 1bytePS+offsetPS */
/* 2bytesPS+offsetPS */
/* blockID+offsetPS */
/* blockID+offsetID */
/* blockID+counterID+offsetID */
UCHAR ucData ; /* PS data1 */
UCHAR ucStatus ; /* Status byte 1=success, 2=failure, Also is used as PS data2 */
UCHAR ucSlaveAddr ; /* Write to which slave */
UCHAR ucLineNumber ; /* Write from which HW assisted line */
} WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS ;
# define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS {
USHORT usPrescale ; /* Ratio between Engine clock and I2C clock */
UCHAR ucSlaveAddr ; /* Write to which slave */
UCHAR ucLineNumber ; /* Write from which HW assisted line */
} SET_UP_HW_I2C_DATA_PARAMETERS ;
/**************************************************************************/
# define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
/****************************************************************************/
/* Structures used by PowerConnectorDetectionTable */
/****************************************************************************/
typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS {
UCHAR ucPowerConnectorStatus ; /* Used for return value 0: detected, 1:not detected */
UCHAR ucPwrBehaviorId ;
USHORT usPwrBudget ; /* how much power currently boot to in unit of watt */
} POWER_CONNECTOR_DETECTION_PARAMETERS ;
typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION {
UCHAR ucPowerConnectorStatus ; /* Used for return value 0: detected, 1:not detected */
UCHAR ucReserved ;
USHORT usPwrBudget ; /* how much power currently boot to in unit of watt */
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ;
} POWER_CONNECTOR_DETECTION_PS_ALLOCATION ;
/****************************LVDS SS Command Table Definitions**********************/
/****************************************************************************/
/* Structures used by EnableSpreadSpectrumOnPPLLTable */
/****************************************************************************/
typedef struct _ENABLE_LVDS_SS_PARAMETERS {
USHORT usSpreadSpectrumPercentage ;
UCHAR ucSpreadSpectrumType ; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
UCHAR ucSpreadSpectrumStepSize_Delay ; /* bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY */
UCHAR ucEnable ; /* ATOM_ENABLE or ATOM_DISABLE */
UCHAR ucPadding [ 3 ] ;
} ENABLE_LVDS_SS_PARAMETERS ;
/* ucTableFormatRevision=1,ucTableContentRevision=2 */
typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2 {
USHORT usSpreadSpectrumPercentage ;
UCHAR ucSpreadSpectrumType ; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
UCHAR ucSpreadSpectrumStep ; /* */
UCHAR ucEnable ; /* ATOM_ENABLE or ATOM_DISABLE */
UCHAR ucSpreadSpectrumDelay ;
UCHAR ucSpreadSpectrumRange ;
UCHAR ucPadding ;
} ENABLE_LVDS_SS_PARAMETERS_V2 ;
/* This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS. */
typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL {
USHORT usSpreadSpectrumPercentage ;
UCHAR ucSpreadSpectrumType ; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
UCHAR ucSpreadSpectrumStep ; /* */
UCHAR ucEnable ; /* ATOM_ENABLE or ATOM_DISABLE */
UCHAR ucSpreadSpectrumDelay ;
UCHAR ucSpreadSpectrumRange ;
UCHAR ucPpll ; /* ATOM_PPLL1/ATOM_PPLL2 */
} ENABLE_SPREAD_SPECTRUM_ON_PPLL ;
# define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL
/**************************************************************************/
typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION {
PIXEL_CLOCK_PARAMETERS sPCLKInput ;
ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved ; /* Caller doesn't need to init this portion */
} SET_PIXEL_CLOCK_PS_ALLOCATION ;
# define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION
/****************************************************************************/
/* Structures used by ### */
/****************************************************************************/
typedef struct _MEMORY_TRAINING_PARAMETERS {
ULONG ulTargetMemoryClock ; /* In 10Khz unit */
} MEMORY_TRAINING_PARAMETERS ;
# define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS
/****************************LVDS and other encoder command table definitions **********************/
/****************************************************************************/
/* Structures used by LVDSEncoderControlTable (Before DCE30) */
/* LVTMAEncoderControlTable (Before DCE30) */
/* TMDSAEncoderControlTable (Before DCE30) */
/****************************************************************************/
typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS {
USHORT usPixelClock ; /* in 10KHz; for bios convenient */
UCHAR ucMisc ; /* bit0=0: Enable single link */
/* =1: Enable dual link */
/* Bit1=0: 666RGB */
/* =1: 888RGB */
UCHAR ucAction ; /* 0: turn off encoder */
/* 1: setup and turn on encoder */
} LVDS_ENCODER_CONTROL_PARAMETERS ;
# define LVDS_ENCODER_CONTROL_PS_ALLOCATION LVDS_ENCODER_CONTROL_PARAMETERS
# define TMDS1_ENCODER_CONTROL_PARAMETERS LVDS_ENCODER_CONTROL_PARAMETERS
# define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS
# define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS
# define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS
/* ucTableFormatRevision=1,ucTableContentRevision=2 */
typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 {
USHORT usPixelClock ; /* in 10KHz; for bios convenient */
UCHAR ucMisc ; /* see PANEL_ENCODER_MISC_xx defintions below */
UCHAR ucAction ; /* 0: turn off encoder */
/* 1: setup and turn on encoder */
UCHAR ucTruncate ; /* bit0=0: Disable truncate */
/* =1: Enable truncate */
/* bit4=0: 666RGB */
/* =1: 888RGB */
UCHAR ucSpatial ; /* bit0=0: Disable spatial dithering */
/* =1: Enable spatial dithering */
/* bit4=0: 666RGB */
/* =1: 888RGB */
UCHAR ucTemporal ; /* bit0=0: Disable temporal dithering */
/* =1: Enable temporal dithering */
/* bit4=0: 666RGB */
/* =1: 888RGB */
/* bit5=0: Gray level 2 */
/* =1: Gray level 4 */
UCHAR ucFRC ; /* bit4=0: 25FRC_SEL pattern E */
/* =1: 25FRC_SEL pattern F */
/* bit6:5=0: 50FRC_SEL pattern A */
/* =1: 50FRC_SEL pattern B */
/* =2: 50FRC_SEL pattern C */
/* =3: 50FRC_SEL pattern D */
/* bit7=0: 75FRC_SEL pattern E */
/* =1: 75FRC_SEL pattern F */
} LVDS_ENCODER_CONTROL_PARAMETERS_V2 ;
# define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
# define TMDS1_ENCODER_CONTROL_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
# define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
# define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
# define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2
# define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2
# define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3
/****************************************************************************/
/* Structures used by ### */
/****************************************************************************/
typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS {
UCHAR ucEnable ; /* Enable or Disable External TMDS encoder */
UCHAR ucMisc ; /* Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB} */
UCHAR ucPadding [ 2 ] ;
} ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS ;
typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION {
ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ; /* Caller doesn't need to init this portion */
} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION ;
# define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 {
ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ; /* Caller doesn't need to init this portion */
} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 ;
typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION {
DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ;
} EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION ;
/****************************************************************************/
/* Structures used by DVOEncoderControlTable */
/****************************************************************************/
/* ucTableFormatRevision=1,ucTableContentRevision=3 */
/* ucDVOConfig: */
# define DVO_ENCODER_CONFIG_RATE_SEL 0x01
# define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
# define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
# define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
# define DVO_ENCODER_CONFIG_LOW12BIT 0x00
# define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
# define DVO_ENCODER_CONFIG_24BIT 0x08
typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 {
USHORT usPixelClock ;
UCHAR ucDVOConfig ;
UCHAR ucAction ; /* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */
UCHAR ucReseved [ 4 ] ;
} DVO_ENCODER_CONTROL_PARAMETERS_V3 ;
# define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3
/* ucTableFormatRevision=1 */
/* ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for */
/* bit1=0: non-coherent mode */
/* =1: coherent mode */
/* ========================================================================================== */
/* Only change is here next time when changing encoder parameter definitions again! */
# define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST LVDS_ENCODER_CONTROL_PARAMETERS_LAST
# define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST
# define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST
# define DVO_ENCODER_CONTROL_PARAMETERS_LAST DVO_ENCODER_CONTROL_PARAMETERS
# define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST DVO_ENCODER_CONTROL_PS_ALLOCATION
/* ========================================================================================== */
# define PANEL_ENCODER_MISC_DUAL 0x01
# define PANEL_ENCODER_MISC_COHERENT 0x02
# define PANEL_ENCODER_MISC_TMDS_LINKB 0x04
# define PANEL_ENCODER_MISC_HDMI_TYPE 0x08
# define PANEL_ENCODER_ACTION_DISABLE ATOM_DISABLE
# define PANEL_ENCODER_ACTION_ENABLE ATOM_ENABLE
# define PANEL_ENCODER_ACTION_COHERENTSEQ (ATOM_ENABLE+1)
# define PANEL_ENCODER_TRUNCATE_EN 0x01
# define PANEL_ENCODER_TRUNCATE_DEPTH 0x10
# define PANEL_ENCODER_SPATIAL_DITHER_EN 0x01
# define PANEL_ENCODER_SPATIAL_DITHER_DEPTH 0x10
# define PANEL_ENCODER_TEMPORAL_DITHER_EN 0x01
# define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH 0x10
# define PANEL_ENCODER_TEMPORAL_LEVEL_4 0x20
# define PANEL_ENCODER_25FRC_MASK 0x10
# define PANEL_ENCODER_25FRC_E 0x00
# define PANEL_ENCODER_25FRC_F 0x10
# define PANEL_ENCODER_50FRC_MASK 0x60
# define PANEL_ENCODER_50FRC_A 0x00
# define PANEL_ENCODER_50FRC_B 0x20
# define PANEL_ENCODER_50FRC_C 0x40
# define PANEL_ENCODER_50FRC_D 0x60
# define PANEL_ENCODER_75FRC_MASK 0x80
# define PANEL_ENCODER_75FRC_E 0x00
# define PANEL_ENCODER_75FRC_F 0x80
/****************************************************************************/
/* Structures used by SetVoltageTable */
/****************************************************************************/
# define SET_VOLTAGE_TYPE_ASIC_VDDC 1
# define SET_VOLTAGE_TYPE_ASIC_MVDDC 2
# define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3
# define SET_VOLTAGE_TYPE_ASIC_VDDCI 4
# define SET_VOLTAGE_INIT_MODE 5
# define SET_VOLTAGE_GET_MAX_VOLTAGE 6 /* Gets the Max. voltage for the soldered Asic */
# define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1
# define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2
# define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4
# define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0
# define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1
# define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2
typedef struct _SET_VOLTAGE_PARAMETERS {
UCHAR ucVoltageType ; /* To tell which voltage to set up, VDDC/MVDDC/MVDDQ */
UCHAR ucVoltageMode ; /* To set all, to set source A or source B or ... */
UCHAR ucVoltageIndex ; /* An index to tell which voltage level */
UCHAR ucReserved ;
} SET_VOLTAGE_PARAMETERS ;
typedef struct _SET_VOLTAGE_PARAMETERS_V2 {
UCHAR ucVoltageType ; /* To tell which voltage to set up, VDDC/MVDDC/MVDDQ */
UCHAR ucVoltageMode ; /* Not used, maybe use for state machine for differen power mode */
USHORT usVoltageLevel ; /* real voltage level */
} SET_VOLTAGE_PARAMETERS_V2 ;
typedef struct _SET_VOLTAGE_PS_ALLOCATION {
SET_VOLTAGE_PARAMETERS sASICSetVoltage ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ;
} SET_VOLTAGE_PS_ALLOCATION ;
/****************************************************************************/
/* Structures used by TVEncoderControlTable */
/****************************************************************************/
typedef struct _TV_ENCODER_CONTROL_PARAMETERS {
USHORT usPixelClock ; /* in 10KHz; for bios convenient */
UCHAR ucTvStandard ; /* See definition "ATOM_TV_NTSC ..." */
UCHAR ucAction ; /* 0: turn off encoder */
/* 1: setup and turn on encoder */
} TV_ENCODER_CONTROL_PARAMETERS ;
typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION {
TV_ENCODER_CONTROL_PARAMETERS sTVEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ; /* Don't set this one */
} TV_ENCODER_CONTROL_PS_ALLOCATION ;
/* ==============================Data Table Portion==================================== */
# ifdef UEFI_BUILD
# define UTEMP USHORT
# define USHORT void*
# endif
/****************************************************************************/
/* Structure used in Data.mtb */
/****************************************************************************/
typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES {
USHORT UtilityPipeLine ; /* Offest for the utility to get parser info,Don't change this position! */
USHORT MultimediaCapabilityInfo ; /* Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios */
USHORT MultimediaConfigInfo ; /* Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios */
USHORT StandardVESA_Timing ; /* Only used by Bios */
USHORT FirmwareInfo ; /* Shared by various SW components,latest version 1.4 */
USHORT DAC_Info ; /* Will be obsolete from R600 */
USHORT LVDS_Info ; /* Shared by various SW components,latest version 1.1 */
USHORT TMDS_Info ; /* Will be obsolete from R600 */
USHORT AnalogTV_Info ; /* Shared by various SW components,latest version 1.1 */
USHORT SupportedDevicesInfo ; /* Will be obsolete from R600 */
USHORT GPIO_I2C_Info ; /* Shared by various SW components,latest version 1.2 will be used from R600 */
USHORT VRAM_UsageByFirmware ; /* Shared by various SW components,latest version 1.3 will be used from R600 */
USHORT GPIO_Pin_LUT ; /* Shared by various SW components,latest version 1.1 */
USHORT VESA_ToInternalModeLUT ; /* Only used by Bios */
USHORT ComponentVideoInfo ; /* Shared by various SW components,latest version 2.1 will be used from R600 */
USHORT PowerPlayInfo ; /* Shared by various SW components,latest version 2.1,new design from R600 */
USHORT CompassionateData ; /* Will be obsolete from R600 */
USHORT SaveRestoreInfo ; /* Only used by Bios */
USHORT PPLL_SS_Info ; /* Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info */
USHORT OemInfo ; /* Defined and used by external SW, should be obsolete soon */
USHORT XTMDS_Info ; /* Will be obsolete from R600 */
USHORT MclkSS_Info ; /* Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used */
USHORT Object_Header ; /* Shared by various SW components,latest version 1.1 */
USHORT IndirectIOAccess ; /* Only used by Bios,this table position can't change at all!! */
USHORT MC_InitParameter ; /* Only used by command table */
USHORT ASIC_VDDC_Info ; /* Will be obsolete from R600 */
USHORT ASIC_InternalSS_Info ; /* New tabel name from R600, used to be called "ASIC_MVDDC_Info" */
USHORT TV_VideoMode ; /* Only used by command table */
USHORT VRAM_Info ; /* Only used by command table, latest version 1.3 */
USHORT MemoryTrainingInfo ; /* Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1 */
USHORT IntegratedSystemInfo ; /* Shared by various SW components */
USHORT ASIC_ProfilingInfo ; /* New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600 */
USHORT VoltageObjectInfo ; /* Shared by various SW components, latest version 1.1 */
USHORT PowerSourceInfo ; /* Shared by various SW components, latest versoin 1.1 */
} ATOM_MASTER_LIST_OF_DATA_TABLES ;
# ifdef UEFI_BUILD
# define USHORT UTEMP
# endif
typedef struct _ATOM_MASTER_DATA_TABLE {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables ;
} ATOM_MASTER_DATA_TABLE ;
/****************************************************************************/
/* Structure used in MultimediaCapabilityInfoTable */
/****************************************************************************/
typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulSignature ; /* HW info table signature string "$ATI" */
UCHAR ucI2C_Type ; /* I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc) */
UCHAR ucTV_OutInfo ; /* Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7) */
UCHAR ucVideoPortInfo ; /* Provides the video port capabilities */
UCHAR ucHostPortInfo ; /* Provides host port configuration information */
} ATOM_MULTIMEDIA_CAPABILITY_INFO ;
/****************************************************************************/
/* Structure used in MultimediaConfigInfoTable */
/****************************************************************************/
typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulSignature ; /* MM info table signature sting "$MMT" */
UCHAR ucTunerInfo ; /* Type of tuner installed on the adapter (4:0) and video input for tuner (7:5) */
UCHAR ucAudioChipInfo ; /* List the audio chip type (3:0) product type (4) and OEM revision (7:5) */
UCHAR ucProductID ; /* Defines as OEM ID or ATI board ID dependent on product type setting */
UCHAR ucMiscInfo1 ; /* Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7) */
UCHAR ucMiscInfo2 ; /* I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6) */
UCHAR ucMiscInfo3 ; /* Video Decoder Type (3:0) Video In Standard/Crystal (7:4) */
UCHAR ucMiscInfo4 ; /* Video Decoder Host Config (2:0) reserved (7:3) */
UCHAR ucVideoInput0Info ; /* Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
UCHAR ucVideoInput1Info ; /* Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
UCHAR ucVideoInput2Info ; /* Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
UCHAR ucVideoInput3Info ; /* Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
UCHAR ucVideoInput4Info ; /* Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
} ATOM_MULTIMEDIA_CONFIG_INFO ;
/****************************************************************************/
/* Structures used in FirmwareInfoTable */
/****************************************************************************/
/* usBIOSCapability Defintion: */
/* Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; */
/* Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; */
/* Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; */
/* Others: Reserved */
# define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED 0x0001
# define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT 0x0002
# define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT 0x0004
# define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT 0x0008
# define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT 0x0010
# define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU 0x0020
# define ATOM_BIOS_INFO_WMI_SUPPORT 0x0040
# define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM 0x0080
# define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT 0x0100
# define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK 0x1E00
# define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
# define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE 0x4000
# ifndef _H2INC
/* Please don't add or expand this bitfield structure below, this one will retire soon.! */
typedef struct _ATOM_FIRMWARE_CAPABILITY {
# if ATOM_BIG_ENDIAN
USHORT Reserved : 3 ;
USHORT HyperMemory_Size : 4 ;
USHORT HyperMemory_Support : 1 ;
USHORT PPMode_Assigned : 1 ;
USHORT WMI_SUPPORT : 1 ;
USHORT GPUControlsBL : 1 ;
USHORT EngineClockSS_Support : 1 ;
USHORT MemoryClockSS_Support : 1 ;
USHORT ExtendedDesktopSupport : 1 ;
USHORT DualCRTC_Support : 1 ;
USHORT FirmwarePosted : 1 ;
# else
USHORT FirmwarePosted : 1 ;
USHORT DualCRTC_Support : 1 ;
USHORT ExtendedDesktopSupport : 1 ;
USHORT MemoryClockSS_Support : 1 ;
USHORT EngineClockSS_Support : 1 ;
USHORT GPUControlsBL : 1 ;
USHORT WMI_SUPPORT : 1 ;
USHORT PPMode_Assigned : 1 ;
USHORT HyperMemory_Support : 1 ;
USHORT HyperMemory_Size : 4 ;
USHORT Reserved : 3 ;
# endif
} ATOM_FIRMWARE_CAPABILITY ;
typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS {
ATOM_FIRMWARE_CAPABILITY sbfAccess ;
USHORT susAccess ;
} ATOM_FIRMWARE_CAPABILITY_ACCESS ;
# else
typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS {
USHORT susAccess ;
} ATOM_FIRMWARE_CAPABILITY_ACCESS ;
# endif
typedef struct _ATOM_FIRMWARE_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulFirmwareRevision ;
ULONG ulDefaultEngineClock ; /* In 10Khz unit */
ULONG ulDefaultMemoryClock ; /* In 10Khz unit */
ULONG ulDriverTargetEngineClock ; /* In 10Khz unit */
ULONG ulDriverTargetMemoryClock ; /* In 10Khz unit */
ULONG ulMaxEngineClockPLL_Output ; /* In 10Khz unit */
ULONG ulMaxMemoryClockPLL_Output ; /* In 10Khz unit */
ULONG ulMaxPixelClockPLL_Output ; /* In 10Khz unit */
ULONG ulASICMaxEngineClock ; /* In 10Khz unit */
ULONG ulASICMaxMemoryClock ; /* In 10Khz unit */
UCHAR ucASICMaxTemperature ;
UCHAR ucPadding [ 3 ] ; /* Don't use them */
ULONG aulReservedForBIOS [ 3 ] ; /* Don't use them */
USHORT usMinEngineClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxEngineClockPLL_Input ; /* In 10Khz unit */
USHORT usMinEngineClockPLL_Output ; /* In 10Khz unit */
USHORT usMinMemoryClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxMemoryClockPLL_Input ; /* In 10Khz unit */
USHORT usMinMemoryClockPLL_Output ; /* In 10Khz unit */
USHORT usMaxPixelClock ; /* In 10Khz unit, Max. Pclk */
USHORT usMinPixelClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxPixelClockPLL_Input ; /* In 10Khz unit */
USHORT usMinPixelClockPLL_Output ; /* In 10Khz unit, the definitions above can't change!!! */
ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability ;
USHORT usReferenceClock ; /* In 10Khz unit */
USHORT usPM_RTS_Location ; /* RTS PM4 starting location in ROM in 1Kb unit */
UCHAR ucPM_RTS_StreamSize ; /* RTS PM4 packets in Kb unit */
UCHAR ucDesign_ID ; /* Indicate what is the board design */
UCHAR ucMemoryModule_ID ; /* Indicate what is the board design */
} ATOM_FIRMWARE_INFO ;
typedef struct _ATOM_FIRMWARE_INFO_V1_2 {
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulFirmwareRevision ;
ULONG ulDefaultEngineClock ; /* In 10Khz unit */
ULONG ulDefaultMemoryClock ; /* In 10Khz unit */
ULONG ulDriverTargetEngineClock ; /* In 10Khz unit */
ULONG ulDriverTargetMemoryClock ; /* In 10Khz unit */
ULONG ulMaxEngineClockPLL_Output ; /* In 10Khz unit */
ULONG ulMaxMemoryClockPLL_Output ; /* In 10Khz unit */
ULONG ulMaxPixelClockPLL_Output ; /* In 10Khz unit */
ULONG ulASICMaxEngineClock ; /* In 10Khz unit */
ULONG ulASICMaxMemoryClock ; /* In 10Khz unit */
UCHAR ucASICMaxTemperature ;
UCHAR ucMinAllowedBL_Level ;
UCHAR ucPadding [ 2 ] ; /* Don't use them */
ULONG aulReservedForBIOS [ 2 ] ; /* Don't use them */
ULONG ulMinPixelClockPLL_Output ; /* In 10Khz unit */
USHORT usMinEngineClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxEngineClockPLL_Input ; /* In 10Khz unit */
USHORT usMinEngineClockPLL_Output ; /* In 10Khz unit */
USHORT usMinMemoryClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxMemoryClockPLL_Input ; /* In 10Khz unit */
USHORT usMinMemoryClockPLL_Output ; /* In 10Khz unit */
USHORT usMaxPixelClock ; /* In 10Khz unit, Max. Pclk */
USHORT usMinPixelClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxPixelClockPLL_Input ; /* In 10Khz unit */
USHORT usMinPixelClockPLL_Output ; /* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability ;
USHORT usReferenceClock ; /* In 10Khz unit */
USHORT usPM_RTS_Location ; /* RTS PM4 starting location in ROM in 1Kb unit */
UCHAR ucPM_RTS_StreamSize ; /* RTS PM4 packets in Kb unit */
UCHAR ucDesign_ID ; /* Indicate what is the board design */
UCHAR ucMemoryModule_ID ; /* Indicate what is the board design */
} ATOM_FIRMWARE_INFO_V1_2 ;
typedef struct _ATOM_FIRMWARE_INFO_V1_3 {
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulFirmwareRevision ;
ULONG ulDefaultEngineClock ; /* In 10Khz unit */
ULONG ulDefaultMemoryClock ; /* In 10Khz unit */
ULONG ulDriverTargetEngineClock ; /* In 10Khz unit */
ULONG ulDriverTargetMemoryClock ; /* In 10Khz unit */
ULONG ulMaxEngineClockPLL_Output ; /* In 10Khz unit */
ULONG ulMaxMemoryClockPLL_Output ; /* In 10Khz unit */
ULONG ulMaxPixelClockPLL_Output ; /* In 10Khz unit */
ULONG ulASICMaxEngineClock ; /* In 10Khz unit */
ULONG ulASICMaxMemoryClock ; /* In 10Khz unit */
UCHAR ucASICMaxTemperature ;
UCHAR ucMinAllowedBL_Level ;
UCHAR ucPadding [ 2 ] ; /* Don't use them */
ULONG aulReservedForBIOS ; /* Don't use them */
ULONG ul3DAccelerationEngineClock ; /* In 10Khz unit */
ULONG ulMinPixelClockPLL_Output ; /* In 10Khz unit */
USHORT usMinEngineClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxEngineClockPLL_Input ; /* In 10Khz unit */
USHORT usMinEngineClockPLL_Output ; /* In 10Khz unit */
USHORT usMinMemoryClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxMemoryClockPLL_Input ; /* In 10Khz unit */
USHORT usMinMemoryClockPLL_Output ; /* In 10Khz unit */
USHORT usMaxPixelClock ; /* In 10Khz unit, Max. Pclk */
USHORT usMinPixelClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxPixelClockPLL_Input ; /* In 10Khz unit */
USHORT usMinPixelClockPLL_Output ; /* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability ;
USHORT usReferenceClock ; /* In 10Khz unit */
USHORT usPM_RTS_Location ; /* RTS PM4 starting location in ROM in 1Kb unit */
UCHAR ucPM_RTS_StreamSize ; /* RTS PM4 packets in Kb unit */
UCHAR ucDesign_ID ; /* Indicate what is the board design */
UCHAR ucMemoryModule_ID ; /* Indicate what is the board design */
} ATOM_FIRMWARE_INFO_V1_3 ;
typedef struct _ATOM_FIRMWARE_INFO_V1_4 {
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulFirmwareRevision ;
ULONG ulDefaultEngineClock ; /* In 10Khz unit */
ULONG ulDefaultMemoryClock ; /* In 10Khz unit */
ULONG ulDriverTargetEngineClock ; /* In 10Khz unit */
ULONG ulDriverTargetMemoryClock ; /* In 10Khz unit */
ULONG ulMaxEngineClockPLL_Output ; /* In 10Khz unit */
ULONG ulMaxMemoryClockPLL_Output ; /* In 10Khz unit */
ULONG ulMaxPixelClockPLL_Output ; /* In 10Khz unit */
ULONG ulASICMaxEngineClock ; /* In 10Khz unit */
ULONG ulASICMaxMemoryClock ; /* In 10Khz unit */
UCHAR ucASICMaxTemperature ;
UCHAR ucMinAllowedBL_Level ;
USHORT usBootUpVDDCVoltage ; /* In MV unit */
USHORT usLcdMinPixelClockPLL_Output ; /* In MHz unit */
USHORT usLcdMaxPixelClockPLL_Output ; /* In MHz unit */
ULONG ul3DAccelerationEngineClock ; /* In 10Khz unit */
ULONG ulMinPixelClockPLL_Output ; /* In 10Khz unit */
USHORT usMinEngineClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxEngineClockPLL_Input ; /* In 10Khz unit */
USHORT usMinEngineClockPLL_Output ; /* In 10Khz unit */
USHORT usMinMemoryClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxMemoryClockPLL_Input ; /* In 10Khz unit */
USHORT usMinMemoryClockPLL_Output ; /* In 10Khz unit */
USHORT usMaxPixelClock ; /* In 10Khz unit, Max. Pclk */
USHORT usMinPixelClockPLL_Input ; /* In 10Khz unit */
USHORT usMaxPixelClockPLL_Input ; /* In 10Khz unit */
USHORT usMinPixelClockPLL_Output ; /* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability ;
USHORT usReferenceClock ; /* In 10Khz unit */
USHORT usPM_RTS_Location ; /* RTS PM4 starting location in ROM in 1Kb unit */
UCHAR ucPM_RTS_StreamSize ; /* RTS PM4 packets in Kb unit */
UCHAR ucDesign_ID ; /* Indicate what is the board design */
UCHAR ucMemoryModule_ID ; /* Indicate what is the board design */
} ATOM_FIRMWARE_INFO_V1_4 ;
# define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V1_4
/****************************************************************************/
/* Structures used in IntegratedSystemInfoTable */
/****************************************************************************/
# define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2
# define IGP_CAP_FLAG_AC_CARD 0x4
# define IGP_CAP_FLAG_SDVO_CARD 0x8
# define IGP_CAP_FLAG_POSTDIV_BY_2_MODE 0x10
typedef struct _ATOM_INTEGRATED_SYSTEM_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulBootUpEngineClock ; /* in 10kHz unit */
ULONG ulBootUpMemoryClock ; /* in 10kHz unit */
ULONG ulMaxSystemMemoryClock ; /* in 10kHz unit */
ULONG ulMinSystemMemoryClock ; /* in 10kHz unit */
UCHAR ucNumberOfCyclesInPeriodHi ;
UCHAR ucLCDTimingSel ; /* =0:not valid.!=0 sel this timing descriptor from LCD EDID. */
USHORT usReserved1 ;
USHORT usInterNBVoltageLow ; /* An intermidiate PMW value to set the voltage */
USHORT usInterNBVoltageHigh ; /* Another intermidiate PMW value to set the voltage */
ULONG ulReserved [ 2 ] ;
USHORT usFSBClock ; /* In MHz unit */
USHORT usCapabilityFlag ; /* Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable */
/* Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card */
/* Bit[4]==1: P/2 mode, ==0: P/1 mode */
USHORT usPCIENBCfgReg7 ; /* bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal */
USHORT usK8MemoryClock ; /* in MHz unit */
USHORT usK8SyncStartDelay ; /* in 0.01 us unit */
USHORT usK8DataReturnTime ; /* in 0.01 us unit */
UCHAR ucMaxNBVoltage ;
UCHAR ucMinNBVoltage ;
UCHAR ucMemoryType ; /* [7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved */
UCHAR ucNumberOfCyclesInPeriod ; /* CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod */
UCHAR ucStartingPWM_HighTime ; /* CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime */
UCHAR ucHTLinkWidth ; /* 16 bit vs. 8 bit */
UCHAR ucMaxNBVoltageHigh ;
UCHAR ucMinNBVoltageHigh ;
} ATOM_INTEGRATED_SYSTEM_INFO ;
/* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
ulBootUpMemoryClock : For Intel IGP , it ' s the UMA system memory clock
For AMD IGP , it ' s 0 if no SidePort memory installed or it ' s the boot - up SidePort memory clock
ulMaxSystemMemoryClock : For Intel IGP , it ' s the Max freq from memory SPD if memory runs in ASYNC mode or otherwise ( SYNC mode ) it ' s 0
For AMD IGP , for now this can be 0
ulMinSystemMemoryClock : For Intel IGP , it ' s 133 MHz if memory runs in ASYNC mode or otherwise ( SYNC mode ) it ' s 0
For AMD IGP , for now this can be 0
usFSBClock : For Intel IGP , it ' s FSB Freq
For AMD IGP , it ' s HT Link Speed
usK8MemoryClock : For AMD IGP only . For RevF CPU , set it to 200
usK8SyncStartDelay : For AMD IGP only . Memory access latency in K8 , required for watermark calculation
usK8DataReturnTime : For AMD IGP only . Memory access latency in K8 , required for watermark calculation
VC : Voltage Control
ucMaxNBVoltage : Voltage regulator dependent PWM value . Low 8 bits of the value for the max voltage . Set this one to 0xFF if VC without PWM . Set this to 0x0 if no VC at all .
ucMinNBVoltage : Voltage regulator dependent PWM value . Low 8 bits of the value for the min voltage . Set this one to 0x00 if VC without PWM or no VC at all .
ucNumberOfCyclesInPeriod : Indicate how many cycles when PWM duty is 100 % . low 8 bits of the value .
ucNumberOfCyclesInPeriodHi : Indicate how many cycles when PWM duty is 100 % . high 8 bits of the value . If the PWM has an inverter , set bit [ 7 ] = = 1 , otherwise set it 0
ucMaxNBVoltageHigh : Voltage regulator dependent PWM value . High 8 bits of the value for the max voltage . Set this one to 0xFF if VC without PWM . Set this to 0x0 if no VC at all .
ucMinNBVoltageHigh : Voltage regulator dependent PWM value . High 8 bits of the value for the min voltage . Set this one to 0x00 if VC without PWM or no VC at all .
usInterNBVoltageLow : Voltage regulator dependent PWM value . The value makes the the voltage > = Min NB voltage but < = InterNBVoltageHigh . Set this to 0x0000 if VC without PWM or no VC at all .
usInterNBVoltageHigh : Voltage regulator dependent PWM value . The value makes the the voltage > = InterNBVoltageLow but < = Max NB voltage . Set this to 0x0000 if VC without PWM or no VC at all .
*/
/*
The following IGP table is introduced from RS780 , which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST ;
Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need .
The enough reservation should allow us to never change table revisions . Whenever needed , a GPU SW component can use reserved portion for new data entries .
SW components can access the IGP system infor structure in the same way as before
*/
typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 {
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulBootUpEngineClock ; /* in 10kHz unit */
ULONG ulReserved1 [ 2 ] ; /* must be 0x0 for the reserved */
ULONG ulBootUpUMAClock ; /* in 10kHz unit */
ULONG ulBootUpSidePortClock ; /* in 10kHz unit */
ULONG ulMinSidePortClock ; /* in 10kHz unit */
ULONG ulReserved2 [ 6 ] ; /* must be 0x0 for the reserved */
ULONG ulSystemConfig ; /* see explanation below */
ULONG ulBootUpReqDisplayVector ;
ULONG ulOtherDisplayMisc ;
ULONG ulDDISlot1Config ;
ULONG ulDDISlot2Config ;
UCHAR ucMemoryType ; /* [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved */
UCHAR ucUMAChannelNumber ;
UCHAR ucDockingPinBit ;
UCHAR ucDockingPinPolarity ;
ULONG ulDockingPinCFGInfo ;
ULONG ulCPUCapInfo ;
USHORT usNumberOfCyclesInPeriod ;
USHORT usMaxNBVoltage ;
USHORT usMinNBVoltage ;
USHORT usBootUpNBVoltage ;
ULONG ulHTLinkFreq ; /* in 10Khz */
USHORT usMinHTLinkWidth ;
USHORT usMaxHTLinkWidth ;
USHORT usUMASyncStartDelay ;
USHORT usUMADataReturnTime ;
USHORT usLinkStatusZeroTime ;
USHORT usReserved ;
ULONG ulHighVoltageHTLinkFreq ; /* in 10Khz */
ULONG ulLowVoltageHTLinkFreq ; /* in 10Khz */
USHORT usMaxUpStreamHTLinkWidth ;
USHORT usMaxDownStreamHTLinkWidth ;
USHORT usMinUpStreamHTLinkWidth ;
USHORT usMinDownStreamHTLinkWidth ;
ULONG ulReserved3 [ 97 ] ; /* must be 0x0 */
} ATOM_INTEGRATED_SYSTEM_INFO_V2 ;
/*
ulBootUpEngineClock : Boot - up Engine Clock in 10 Khz ;
ulBootUpUMAClock : Boot - up UMA Clock in 10 Khz ; it must be 0x0 when UMA is not present
ulBootUpSidePortClock : Boot - up SidePort Clock in 10 Khz ; it must be 0x0 when SidePort Memory is not present , this could be equal to or less than maximum supported Sideport memory clock
ulSystemConfig :
Bit [ 0 ] = 1 : PowerExpress mode = 0 Non - PowerExpress mode ;
Bit [ 1 ] = 1 : system boots up at AMD overdrived state or user customized mode . In this case , driver will just stick to this boot - up mode . No other PowerPlay state
= 0 : system boots up at driver control state . Power state depends on PowerPlay table .
Bit [ 2 ] = 1 : PWM method is used on NB voltage control . = 0 : GPIO method is used .
Bit [ 3 ] = 1 : Only one power state ( Performance ) will be supported .
= 0 : Multiple power states supported from PowerPlay table .
Bit [ 4 ] = 1 : CLMC is supported and enabled on current system .
= 0 : CLMC is not supported or enabled on current system . SBIOS need to support HT link / freq change through ATIF interface .
Bit [ 5 ] = 1 : Enable CDLW for all driver control power states . Max HT width is from SBIOS , while Min HT width is determined by display requirement .
= 0 : CDLW is disabled . If CLMC is enabled case , Min HT width will be set equal to Max HT width . If CLMC disabled case , Max HT width will be applied .
Bit [ 6 ] = 1 : High Voltage requested for all power states . In this case , voltage will be forced at 1.1 v and powerplay table voltage drop / throttling request will be ignored .
= 0 : Voltage settings is determined by powerplay table .
Bit [ 7 ] = 1 : Enable CLMC as hybrid Mode . CDLD and CILR will be disabled in this case and we ' re using legacy C1E . This is workaround for CPU ( Griffin ) performance issue .
= 0 : Enable CLMC as regular mode , CDLD and CILR will be enabled .
ulBootUpReqDisplayVector : This dword is a bit vector indicates what display devices are requested during boot - up . Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions .
ulOtherDisplayMisc : [ 15 : 8 ] - Bootup LCD Expansion selection ; 0 - center , 1 - full panel size expansion ;
[ 7 : 0 ] - BootupTV standard selection ; This is a bit vector to indicate what TV standards are supported by the system . Refer to ucTVSuppportedStd definition ;
ulDDISlot1Config : Describes the PCIE lane configuration on this DDI PCIE slot ( ADD2 card ) or connector ( Mobile design ) .
[ 3 : 0 ] - Bit vector to indicate PCIE lane config of the DDI slot / connector on chassis ( bit 0 = 1 lane 3 : 0 ; bit 1 = 1 lane 7 : 4 ; bit 2 = 1 lane 11 : 8 ; bit 3 = 1 lane 15 : 12 )
[ 7 : 4 ] - Bit vector to indicate PCIE lane config of the same DDI slot / connector on docking station ( bit 0 = 1 lane 3 : 0 ; bit 1 = 1 lane 7 : 4 ; bit 2 = 1 lane 11 : 8 ; bit 3 = 1 lane 15 : 12 )
[ 15 : 8 ] - Lane configuration attribute ;
[ 23 : 16 ] - Connector type , possible value :
CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
CONNECTOR_OBJECT_ID_HDMI_TYPE_A
CONNECTOR_OBJECT_ID_DISPLAYPORT
[ 31 : 24 ] - Reserved
ulDDISlot2Config : Same as Slot1 .
ucMemoryType : SidePort memory type , set it to 0x0 when Sideport memory is not installed . Driver needs this info to change sideport memory clock . Not for display in CCC .
For IGP , Hypermemory is the only memory type showed in CCC .
ucUMAChannelNumber : how many channels for the UMA ;
ulDockingPinCFGInfo : [ 15 : 0 ] - Bus / Device / Function # to CFG to read this Docking Pin ; [ 31 : 16 ] - reg offset in CFG to read this pin
ucDockingPinBit : which bit in this register to read the pin status ;
ucDockingPinPolarity : Polarity of the pin when docked ;
ulCPUCapInfo : [ 7 : 0 ] = 1 : Griffin ; [ 7 : 0 ] = 2 : Greyhound ; [ 7 : 0 ] = 3 : K8 , other bits reserved for now and must be 0x0
usNumberOfCyclesInPeriod : Indicate how many cycles when PWM duty is 100 % .
usMaxNBVoltage : Max . voltage control value in either PWM or GPIO mode .
usMinNBVoltage : Min . voltage control value in either PWM or GPIO mode .
GPIO mode : both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig . SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE = 0
PWM mode : both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig . SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE = 1
GPU SW don ' t control mode : usMaxNBVoltage & usMinNBVoltage = 0 and no care about ulSystemConfig . SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
usBootUpNBVoltage : Boot - up voltage regulator dependent PWM value .
ulHTLinkFreq : Bootup HT link Frequency in 10 Khz .
usMinHTLinkWidth : Bootup minimum HT link width . If CDLW disabled , this is equal to usMaxHTLinkWidth .
If CDLW enabled , both upstream and downstream width should be the same during bootup .
usMaxHTLinkWidth : Bootup maximum HT link width . If CDLW disabled , this is equal to usMinHTLinkWidth .
If CDLW enabled , both upstream and downstream width should be the same during bootup .
usUMASyncStartDelay : Memory access latency , required for watermark calculation
usUMADataReturnTime : Memory access latency , required for watermark calculation
usLinkStatusZeroTime : Memory access latency required for watermark calculation , set this to 0x0 for K8 CPU , set a proper value in 0.01 the unit of us
for Griffin or Greyhound . SBIOS needs to convert to actual time by :
if T0Ttime [ 5 : 4 ] = 00 b , then usLinkStatusZeroTime = T0Ttime [ 3 : 0 ] * 0.1 us ( 0.0 to 1.5 us )
if T0Ttime [ 5 : 4 ] = 01 b , then usLinkStatusZeroTime = T0Ttime [ 3 : 0 ] * 0.5 us ( 0.0 to 7.5 us )
if T0Ttime [ 5 : 4 ] = 10 b , then usLinkStatusZeroTime = T0Ttime [ 3 : 0 ] * 2.0 us ( 0.0 to 30u s )
if T0Ttime [ 5 : 4 ] = 11 b , and T0Ttime [ 3 : 0 ] = 0x0 to 0xa , then usLinkStatusZeroTime = T0Ttime [ 3 : 0 ] * 20u s ( 0.0 to 200u s )
ulHighVoltageHTLinkFreq : HT link frequency for power state with low voltage . If boot up runs in HT1 , this must be 0.
This must be less than or equal to ulHTLinkFreq ( bootup frequency ) .
ulLowVoltageHTLinkFreq : HT link frequency for power state with low voltage or voltage scaling 1.0 v ~ 1.1 v . If boot up runs in HT1 , this must be 0.
This must be less than or equal to ulHighVoltageHTLinkFreq .
usMaxUpStreamHTLinkWidth : Asymmetric link width support in the future , to replace usMaxHTLinkWidth . Not used for now .
usMaxDownStreamHTLinkWidth : same as above .
usMinUpStreamHTLinkWidth : Asymmetric link width support in the future , to replace usMinHTLinkWidth . Not used for now .
usMinDownStreamHTLinkWidth : same as above .
*/
# define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001
# define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002
# define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004
# define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008
# define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010
# define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020
# define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040
# define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080
# define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF
# define b0IGP_DDI_SLOT_LANE_MAP_MASK 0x0F
# define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK 0xF0
# define b0IGP_DDI_SLOT_CONFIG_LANE_0_3 0x01
# define b0IGP_DDI_SLOT_CONFIG_LANE_4_7 0x02
# define b0IGP_DDI_SLOT_CONFIG_LANE_8_11 0x04
# define b0IGP_DDI_SLOT_CONFIG_LANE_12_15 0x08
# define IGP_DDI_SLOT_ATTRIBUTE_MASK 0x0000FF00
# define IGP_DDI_SLOT_CONFIG_REVERSED 0x00000100
# define b1IGP_DDI_SLOT_CONFIG_REVERSED 0x01
# define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK 0x00FF0000
# define ATOM_CRT_INT_ENCODER1_INDEX 0x00000000
# define ATOM_LCD_INT_ENCODER1_INDEX 0x00000001
# define ATOM_TV_INT_ENCODER1_INDEX 0x00000002
# define ATOM_DFP_INT_ENCODER1_INDEX 0x00000003
# define ATOM_CRT_INT_ENCODER2_INDEX 0x00000004
# define ATOM_LCD_EXT_ENCODER1_INDEX 0x00000005
# define ATOM_TV_EXT_ENCODER1_INDEX 0x00000006
# define ATOM_DFP_EXT_ENCODER1_INDEX 0x00000007
# define ATOM_CV_INT_ENCODER1_INDEX 0x00000008
# define ATOM_DFP_INT_ENCODER2_INDEX 0x00000009
# define ATOM_CRT_EXT_ENCODER1_INDEX 0x0000000A
# define ATOM_CV_EXT_ENCODER1_INDEX 0x0000000B
# define ATOM_DFP_INT_ENCODER3_INDEX 0x0000000C
# define ATOM_DFP_INT_ENCODER4_INDEX 0x0000000D
/* define ASIC internal encoder id ( bit vector ) */
# define ASIC_INT_DAC1_ENCODER_ID 0x00
# define ASIC_INT_TV_ENCODER_ID 0x02
# define ASIC_INT_DIG1_ENCODER_ID 0x03
# define ASIC_INT_DAC2_ENCODER_ID 0x04
# define ASIC_EXT_TV_ENCODER_ID 0x06
# define ASIC_INT_DVO_ENCODER_ID 0x07
# define ASIC_INT_DIG2_ENCODER_ID 0x09
# define ASIC_EXT_DIG_ENCODER_ID 0x05
/* define Encoder attribute */
# define ATOM_ANALOG_ENCODER 0
# define ATOM_DIGITAL_ENCODER 1
# define ATOM_DEVICE_CRT1_INDEX 0x00000000
# define ATOM_DEVICE_LCD1_INDEX 0x00000001
# define ATOM_DEVICE_TV1_INDEX 0x00000002
# define ATOM_DEVICE_DFP1_INDEX 0x00000003
# define ATOM_DEVICE_CRT2_INDEX 0x00000004
# define ATOM_DEVICE_LCD2_INDEX 0x00000005
# define ATOM_DEVICE_TV2_INDEX 0x00000006
# define ATOM_DEVICE_DFP2_INDEX 0x00000007
# define ATOM_DEVICE_CV_INDEX 0x00000008
# define ATOM_DEVICE_DFP3_INDEX 0x00000009
# define ATOM_DEVICE_DFP4_INDEX 0x0000000A
# define ATOM_DEVICE_DFP5_INDEX 0x0000000B
# define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C
# define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D
# define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E
# define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F
# define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1)
# define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO
# define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1)
# define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1)
# define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX)
# define ATOM_DEVICE_LCD1_SUPPORT (0x1L << ATOM_DEVICE_LCD1_INDEX)
# define ATOM_DEVICE_TV1_SUPPORT (0x1L << ATOM_DEVICE_TV1_INDEX)
# define ATOM_DEVICE_DFP1_SUPPORT (0x1L << ATOM_DEVICE_DFP1_INDEX)
# define ATOM_DEVICE_CRT2_SUPPORT (0x1L << ATOM_DEVICE_CRT2_INDEX)
# define ATOM_DEVICE_LCD2_SUPPORT (0x1L << ATOM_DEVICE_LCD2_INDEX)
# define ATOM_DEVICE_TV2_SUPPORT (0x1L << ATOM_DEVICE_TV2_INDEX)
# define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX)
# define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX)
# define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX)
# define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX )
# define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX)
# define ATOM_DEVICE_CRT_SUPPORT \
( ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT )
# define ATOM_DEVICE_DFP_SUPPORT \
( ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | \
ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | \
ATOM_DEVICE_DFP5_SUPPORT )
# define ATOM_DEVICE_TV_SUPPORT \
( ATOM_DEVICE_TV1_SUPPORT | ATOM_DEVICE_TV2_SUPPORT )
# define ATOM_DEVICE_LCD_SUPPORT \
( ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT )
# define ATOM_DEVICE_CONNECTOR_TYPE_MASK 0x000000F0
# define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT 0x00000004
# define ATOM_DEVICE_CONNECTOR_VGA 0x00000001
# define ATOM_DEVICE_CONNECTOR_DVI_I 0x00000002
# define ATOM_DEVICE_CONNECTOR_DVI_D 0x00000003
# define ATOM_DEVICE_CONNECTOR_DVI_A 0x00000004
# define ATOM_DEVICE_CONNECTOR_SVIDEO 0x00000005
# define ATOM_DEVICE_CONNECTOR_COMPOSITE 0x00000006
# define ATOM_DEVICE_CONNECTOR_LVDS 0x00000007
# define ATOM_DEVICE_CONNECTOR_DIGI_LINK 0x00000008
# define ATOM_DEVICE_CONNECTOR_SCART 0x00000009
# define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A 0x0000000A
# define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B 0x0000000B
# define ATOM_DEVICE_CONNECTOR_CASE_1 0x0000000E
# define ATOM_DEVICE_CONNECTOR_DISPLAYPORT 0x0000000F
# define ATOM_DEVICE_DAC_INFO_MASK 0x0000000F
# define ATOM_DEVICE_DAC_INFO_SHIFT 0x00000000
# define ATOM_DEVICE_DAC_INFO_NODAC 0x00000000
# define ATOM_DEVICE_DAC_INFO_DACA 0x00000001
# define ATOM_DEVICE_DAC_INFO_DACB 0x00000002
# define ATOM_DEVICE_DAC_INFO_EXDAC 0x00000003
# define ATOM_DEVICE_I2C_ID_NOI2C 0x00000000
# define ATOM_DEVICE_I2C_LINEMUX_MASK 0x0000000F
# define ATOM_DEVICE_I2C_LINEMUX_SHIFT 0x00000000
# define ATOM_DEVICE_I2C_ID_MASK 0x00000070
# define ATOM_DEVICE_I2C_ID_SHIFT 0x00000004
# define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE 0x00000001
# define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE 0x00000002
# define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE 0x00000003 /* For IGP RS600 */
# define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL 0x00000004 /* For IGP RS690 */
# define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK 0x00000080
# define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT 0x00000007
# define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C 0x00000000
# define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C 0x00000001
/* usDeviceSupport: */
/* Bits0 = 0 - no CRT1 support= 1- CRT1 is supported */
/* Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported */
/* Bit 2 = 0 - no TV1 support= 1- TV1 is supported */
/* Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported */
/* Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported */
/* Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported */
/* Bit 6 = 0 - no TV2 support= 1- TV2 is supported */
/* Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported */
/* Bit 8 = 0 - no CV support= 1- CV is supported */
/* Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported */
/* Byte1 (Supported Device Info) */
/* Bit 0 = = 0 - no CV support= 1- CV is supported */
/* */
/* */
/* ucI2C_ConfigID */
/* [7:0] - I2C LINE Associate ID */
/* = 0 - no I2C */
/* [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection) */
/* = 0, [6:0]=SW assisted I2C ID */
/* [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use */
/* = 2, HW engine for Multimedia use */
/* = 3-7 Reserved for future I2C engines */
/* [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C */
typedef struct _ATOM_I2C_ID_CONFIG {
# if ATOM_BIG_ENDIAN
UCHAR bfHW_Capable : 1 ;
UCHAR bfHW_EngineID : 3 ;
UCHAR bfI2C_LineMux : 4 ;
# else
UCHAR bfI2C_LineMux : 4 ;
UCHAR bfHW_EngineID : 3 ;
UCHAR bfHW_Capable : 1 ;
# endif
} ATOM_I2C_ID_CONFIG ;
typedef union _ATOM_I2C_ID_CONFIG_ACCESS {
ATOM_I2C_ID_CONFIG sbfAccess ;
UCHAR ucAccess ;
} ATOM_I2C_ID_CONFIG_ACCESS ;
/****************************************************************************/
/* Structure used in GPIO_I2C_InfoTable */
/****************************************************************************/
typedef struct _ATOM_GPIO_I2C_ASSIGMENT {
USHORT usClkMaskRegisterIndex ;
USHORT usClkEnRegisterIndex ;
USHORT usClkY_RegisterIndex ;
USHORT usClkA_RegisterIndex ;
USHORT usDataMaskRegisterIndex ;
USHORT usDataEnRegisterIndex ;
USHORT usDataY_RegisterIndex ;
USHORT usDataA_RegisterIndex ;
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ;
UCHAR ucClkMaskShift ;
UCHAR ucClkEnShift ;
UCHAR ucClkY_Shift ;
UCHAR ucClkA_Shift ;
UCHAR ucDataMaskShift ;
UCHAR ucDataEnShift ;
UCHAR ucDataY_Shift ;
UCHAR ucDataA_Shift ;
UCHAR ucReserved1 ;
UCHAR ucReserved2 ;
} ATOM_GPIO_I2C_ASSIGMENT ;
typedef struct _ATOM_GPIO_I2C_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info [ ATOM_MAX_SUPPORTED_DEVICE ] ;
} ATOM_GPIO_I2C_INFO ;
/****************************************************************************/
/* Common Structure used in other structures */
/****************************************************************************/
# ifndef _H2INC
/* Please don't add or expand this bitfield structure below, this one will retire soon.! */
typedef struct _ATOM_MODE_MISC_INFO {
# if ATOM_BIG_ENDIAN
USHORT Reserved : 6 ;
USHORT RGB888 : 1 ;
USHORT DoubleClock : 1 ;
USHORT Interlace : 1 ;
USHORT CompositeSync : 1 ;
USHORT V_ReplicationBy2 : 1 ;
USHORT H_ReplicationBy2 : 1 ;
USHORT VerticalCutOff : 1 ;
USHORT VSyncPolarity : 1 ; /* 0=Active High, 1=Active Low */
USHORT HSyncPolarity : 1 ; /* 0=Active High, 1=Active Low */
USHORT HorizontalCutOff : 1 ;
# else
USHORT HorizontalCutOff : 1 ;
USHORT HSyncPolarity : 1 ; /* 0=Active High, 1=Active Low */
USHORT VSyncPolarity : 1 ; /* 0=Active High, 1=Active Low */
USHORT VerticalCutOff : 1 ;
USHORT H_ReplicationBy2 : 1 ;
USHORT V_ReplicationBy2 : 1 ;
USHORT CompositeSync : 1 ;
USHORT Interlace : 1 ;
USHORT DoubleClock : 1 ;
USHORT RGB888 : 1 ;
USHORT Reserved : 6 ;
# endif
} ATOM_MODE_MISC_INFO ;
typedef union _ATOM_MODE_MISC_INFO_ACCESS {
ATOM_MODE_MISC_INFO sbfAccess ;
USHORT usAccess ;
} ATOM_MODE_MISC_INFO_ACCESS ;
# else
typedef union _ATOM_MODE_MISC_INFO_ACCESS {
USHORT usAccess ;
} ATOM_MODE_MISC_INFO_ACCESS ;
# endif
/* usModeMiscInfo- */
# define ATOM_H_CUTOFF 0x01
# define ATOM_HSYNC_POLARITY 0x02 /* 0=Active High, 1=Active Low */
# define ATOM_VSYNC_POLARITY 0x04 /* 0=Active High, 1=Active Low */
# define ATOM_V_CUTOFF 0x08
# define ATOM_H_REPLICATIONBY2 0x10
# define ATOM_V_REPLICATIONBY2 0x20
# define ATOM_COMPOSITESYNC 0x40
# define ATOM_INTERLACE 0x80
# define ATOM_DOUBLE_CLOCK_MODE 0x100
# define ATOM_RGB888_MODE 0x200
/* usRefreshRate- */
# define ATOM_REFRESH_43 43
# define ATOM_REFRESH_47 47
# define ATOM_REFRESH_56 56
# define ATOM_REFRESH_60 60
# define ATOM_REFRESH_65 65
# define ATOM_REFRESH_70 70
# define ATOM_REFRESH_72 72
# define ATOM_REFRESH_75 75
# define ATOM_REFRESH_85 85
/* ATOM_MODE_TIMING data are exactly the same as VESA timing data. */
/* Translation from EDID to ATOM_MODE_TIMING, use the following formula. */
/* */
/* VESA_HTOTAL = VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK */
/* = EDID_HA + EDID_HBL */
/* VESA_HDISP = VESA_ACTIVE = EDID_HA */
/* VESA_HSYNC_START = VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH */
/* = EDID_HA + EDID_HSO */
/* VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW */
/* VESA_BORDER = EDID_BORDER */
/****************************************************************************/
/* Structure used in SetCRTC_UsingDTDTimingTable */
/****************************************************************************/
typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS {
USHORT usH_Size ;
USHORT usH_Blanking_Time ;
USHORT usV_Size ;
USHORT usV_Blanking_Time ;
USHORT usH_SyncOffset ;
USHORT usH_SyncWidth ;
USHORT usV_SyncOffset ;
USHORT usV_SyncWidth ;
ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo ;
UCHAR ucH_Border ; /* From DFP EDID */
UCHAR ucV_Border ;
UCHAR ucCRTC ; /* ATOM_CRTC1 or ATOM_CRTC2 */
UCHAR ucPadding [ 3 ] ;
} SET_CRTC_USING_DTD_TIMING_PARAMETERS ;
/****************************************************************************/
/* Structure used in SetCRTC_TimingTable */
/****************************************************************************/
typedef struct _SET_CRTC_TIMING_PARAMETERS {
USHORT usH_Total ; /* horizontal total */
USHORT usH_Disp ; /* horizontal display */
USHORT usH_SyncStart ; /* horozontal Sync start */
USHORT usH_SyncWidth ; /* horizontal Sync width */
USHORT usV_Total ; /* vertical total */
USHORT usV_Disp ; /* vertical display */
USHORT usV_SyncStart ; /* vertical Sync start */
USHORT usV_SyncWidth ; /* vertical Sync width */
ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo ;
UCHAR ucCRTC ; /* ATOM_CRTC1 or ATOM_CRTC2 */
UCHAR ucOverscanRight ; /* right */
UCHAR ucOverscanLeft ; /* left */
UCHAR ucOverscanBottom ; /* bottom */
UCHAR ucOverscanTop ; /* top */
UCHAR ucReserved ;
} SET_CRTC_TIMING_PARAMETERS ;
# define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS
/****************************************************************************/
/* Structure used in StandardVESA_TimingTable */
/* AnalogTV_InfoTable */
/* ComponentVideoInfoTable */
/****************************************************************************/
typedef struct _ATOM_MODE_TIMING {
USHORT usCRTC_H_Total ;
USHORT usCRTC_H_Disp ;
USHORT usCRTC_H_SyncStart ;
USHORT usCRTC_H_SyncWidth ;
USHORT usCRTC_V_Total ;
USHORT usCRTC_V_Disp ;
USHORT usCRTC_V_SyncStart ;
USHORT usCRTC_V_SyncWidth ;
USHORT usPixelClock ; /* in 10Khz unit */
ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo ;
USHORT usCRTC_OverscanRight ;
USHORT usCRTC_OverscanLeft ;
USHORT usCRTC_OverscanBottom ;
USHORT usCRTC_OverscanTop ;
USHORT usReserve ;
UCHAR ucInternalModeNumber ;
UCHAR ucRefreshRate ;
} ATOM_MODE_TIMING ;
typedef struct _ATOM_DTD_FORMAT {
USHORT usPixClk ;
USHORT usHActive ;
USHORT usHBlanking_Time ;
USHORT usVActive ;
USHORT usVBlanking_Time ;
USHORT usHSyncOffset ;
USHORT usHSyncWidth ;
USHORT usVSyncOffset ;
USHORT usVSyncWidth ;
USHORT usImageHSize ;
USHORT usImageVSize ;
UCHAR ucHBorder ;
UCHAR ucVBorder ;
ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo ;
UCHAR ucInternalModeNumber ;
UCHAR ucRefreshRate ;
} ATOM_DTD_FORMAT ;
/****************************************************************************/
/* Structure used in LVDS_InfoTable */
/* * Need a document to describe this table */
/****************************************************************************/
# define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
# define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
# define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
# define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
/* Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. */
/* Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL */
# define LCDPANEL_CAP_READ_EDID 0x1
/* ucTableFormatRevision=1 */
/* ucTableContentRevision=1 */
typedef struct _ATOM_LVDS_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_DTD_FORMAT sLCDTiming ;
USHORT usModePatchTableOffset ;
USHORT usSupportedRefreshRate ; /* Refer to panel info table in ATOMBIOS extension Spec. */
USHORT usOffDelayInMs ;
UCHAR ucPowerSequenceDigOntoDEin10Ms ;
UCHAR ucPowerSequenceDEtoBLOnin10Ms ;
UCHAR ucLVDS_Misc ; /* Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */
/* Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */
/* Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */
/* Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */
UCHAR ucPanelDefaultRefreshRate ;
UCHAR ucPanelIdentification ;
UCHAR ucSS_Id ;
} ATOM_LVDS_INFO ;
/* ucTableFormatRevision=1 */
/* ucTableContentRevision=2 */
typedef struct _ATOM_LVDS_INFO_V12 {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_DTD_FORMAT sLCDTiming ;
USHORT usExtInfoTableOffset ;
USHORT usSupportedRefreshRate ; /* Refer to panel info table in ATOMBIOS extension Spec. */
USHORT usOffDelayInMs ;
UCHAR ucPowerSequenceDigOntoDEin10Ms ;
UCHAR ucPowerSequenceDEtoBLOnin10Ms ;
UCHAR ucLVDS_Misc ; /* Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */
/* Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */
/* Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */
/* Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */
UCHAR ucPanelDefaultRefreshRate ;
UCHAR ucPanelIdentification ;
UCHAR ucSS_Id ;
USHORT usLCDVenderID ;
USHORT usLCDProductID ;
UCHAR ucLCDPanel_SpecialHandlingCap ;
UCHAR ucPanelInfoSize ; /* start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable */
UCHAR ucReserved [ 2 ] ;
} ATOM_LVDS_INFO_V12 ;
# define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12
typedef struct _ATOM_PATCH_RECORD_MODE {
UCHAR ucRecordType ;
USHORT usHDisp ;
USHORT usVDisp ;
} ATOM_PATCH_RECORD_MODE ;
typedef struct _ATOM_LCD_RTS_RECORD {
UCHAR ucRecordType ;
UCHAR ucRTSValue ;
} ATOM_LCD_RTS_RECORD ;
/* !! If the record below exits, it shoud always be the first record for easy use in command table!!! */
typedef struct _ATOM_LCD_MODE_CONTROL_CAP {
UCHAR ucRecordType ;
USHORT usLCDCap ;
} ATOM_LCD_MODE_CONTROL_CAP ;
# define LCD_MODE_CAP_BL_OFF 1
# define LCD_MODE_CAP_CRTC_OFF 2
# define LCD_MODE_CAP_PANEL_OFF 4
typedef struct _ATOM_FAKE_EDID_PATCH_RECORD {
UCHAR ucRecordType ;
UCHAR ucFakeEDIDLength ;
UCHAR ucFakeEDIDString [ 1 ] ; /* This actually has ucFakeEdidLength elements. */
} ATOM_FAKE_EDID_PATCH_RECORD ;
typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD {
UCHAR ucRecordType ;
USHORT usHSize ;
USHORT usVSize ;
} ATOM_PANEL_RESOLUTION_PATCH_RECORD ;
# define LCD_MODE_PATCH_RECORD_MODE_TYPE 1
# define LCD_RTS_RECORD_TYPE 2
# define LCD_CAP_RECORD_TYPE 3
# define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4
# define LCD_PANEL_RESOLUTION_RECORD_TYPE 5
# define ATOM_RECORD_END_TYPE 0xFF
/****************************Spread Spectrum Info Table Definitions **********************/
/* ucTableFormatRevision=1 */
/* ucTableContentRevision=2 */
typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT {
USHORT usSpreadSpectrumPercentage ;
UCHAR ucSpreadSpectrumType ; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
UCHAR ucSS_Step ;
UCHAR ucSS_Delay ;
UCHAR ucSS_Id ;
UCHAR ucRecommandedRef_Div ;
UCHAR ucSS_Range ; /* it was reserved for V11 */
} ATOM_SPREAD_SPECTRUM_ASSIGNMENT ;
# define ATOM_MAX_SS_ENTRY 16
# define ATOM_DP_SS_ID1 0x0f1 /* SS modulation freq=30k */
# define ATOM_DP_SS_ID2 0x0f2 /* SS modulation freq=33k */
# define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000
# define ATOM_SS_DOWN_SPREAD_MODE 0x00000000
# define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001
# define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001
# define ATOM_INTERNAL_SS_MASK 0x00000000
# define ATOM_EXTERNAL_SS_MASK 0x00000002
# define EXEC_SS_STEP_SIZE_SHIFT 2
# define EXEC_SS_DELAY_SHIFT 4
# define ACTIVEDATA_TO_BLON_DELAY_SHIFT 4
typedef struct _ATOM_SPREAD_SPECTRUM_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info [ ATOM_MAX_SS_ENTRY ] ;
} ATOM_SPREAD_SPECTRUM_INFO ;
/****************************************************************************/
/* Structure used in AnalogTV_InfoTable (Top level) */
/****************************************************************************/
/* ucTVBootUpDefaultStd definiton: */
/* ATOM_TV_NTSC 1 */
/* ATOM_TV_NTSCJ 2 */
/* ATOM_TV_PAL 3 */
/* ATOM_TV_PALM 4 */
/* ATOM_TV_PALCN 5 */
/* ATOM_TV_PALN 6 */
/* ATOM_TV_PAL60 7 */
/* ATOM_TV_SECAM 8 */
/* ucTVSuppportedStd definition: */
# define NTSC_SUPPORT 0x1
# define NTSCJ_SUPPORT 0x2
# define PAL_SUPPORT 0x4
# define PALM_SUPPORT 0x8
# define PALCN_SUPPORT 0x10
# define PALN_SUPPORT 0x20
# define PAL60_SUPPORT 0x40
# define SECAM_SUPPORT 0x80
# define MAX_SUPPORTED_TV_TIMING 2
typedef struct _ATOM_ANALOG_TV_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucTV_SupportedStandard ;
UCHAR ucTV_BootUpDefaultStandard ;
UCHAR ucExt_TV_ASIC_ID ;
UCHAR ucExt_TV_ASIC_SlaveAddr ;
/*ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING]; */
ATOM_MODE_TIMING aModeTimings [ MAX_SUPPORTED_TV_TIMING ] ;
} ATOM_ANALOG_TV_INFO ;
2009-09-26 16:08:05 +02:00
# define MAX_SUPPORTED_TV_TIMING_V1_2 3
typedef struct _ATOM_ANALOG_TV_INFO_V1_2 {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucTV_SupportedStandard ;
UCHAR ucTV_BootUpDefaultStandard ;
UCHAR ucExt_TV_ASIC_ID ;
UCHAR ucExt_TV_ASIC_SlaveAddr ;
ATOM_DTD_FORMAT aModeTimings [ MAX_SUPPORTED_TV_TIMING ] ;
} ATOM_ANALOG_TV_INFO_V1_2 ;
2009-06-30 11:57:44 +02:00
/**************************************************************************/
/* VRAM usage and their defintions */
/* One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. */
/* Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. */
/* All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned! */
/* To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR */
/* To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX */
# ifndef VESA_MEMORY_IN_64K_BLOCK
# define VESA_MEMORY_IN_64K_BLOCK 0x100 /* 256*64K=16Mb (Max. VESA memory is 16Mb!) */
# endif
# define ATOM_EDID_RAW_DATASIZE 256 /* In Bytes */
# define ATOM_HWICON_SURFACE_SIZE 4096 /* In Bytes */
# define ATOM_HWICON_INFOTABLE_SIZE 32
# define MAX_DTD_MODE_IN_VRAM 6
# define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) /* 28= (SIZEOF ATOM_DTD_FORMAT) */
# define ATOM_STD_MODE_SUPPORT_TBL_SIZE (32*8) /* 32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT) */
# define DFP_ENCODER_TYPE_OFFSET 0x80
# define DP_ENCODER_LANE_NUM_OFFSET 0x84
# define DP_ENCODER_LINK_RATE_OFFSET 0x88
# define ATOM_HWICON1_SURFACE_ADDR 0
# define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
# define ATOM_HWICON_INFOTABLE_ADDR (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
# define ATOM_CRT1_EDID_ADDR (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
# define ATOM_CRT1_DTD_MODE_TBL_ADDR (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_CRT1_STD_MODE_TBL_ADDR (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_LCD1_EDID_ADDR (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_LCD1_DTD_MODE_TBL_ADDR (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_LCD1_STD_MODE_TBL_ADDR (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_TV1_DTD_MODE_TBL_ADDR (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP1_EDID_ADDR (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP1_DTD_MODE_TBL_ADDR (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP1_STD_MODE_TBL_ADDR (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_CRT2_EDID_ADDR (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_CRT2_DTD_MODE_TBL_ADDR (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_CRT2_STD_MODE_TBL_ADDR (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_LCD2_EDID_ADDR (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_LCD2_DTD_MODE_TBL_ADDR (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_LCD2_STD_MODE_TBL_ADDR (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_TV2_EDID_ADDR (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_TV2_DTD_MODE_TBL_ADDR (ATOM_TV2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_TV2_STD_MODE_TBL_ADDR (ATOM_TV2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP2_EDID_ADDR (ATOM_TV2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP2_DTD_MODE_TBL_ADDR (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP2_STD_MODE_TBL_ADDR (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_CV_EDID_ADDR (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_CV_DTD_MODE_TBL_ADDR (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_CV_STD_MODE_TBL_ADDR (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP3_EDID_ADDR (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR + 256)
# define ATOM_STACK_STORAGE_END (ATOM_STACK_STORAGE_START + 512)
/* The size below is in Kb! */
# define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
# define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L
# define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30
# define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1
# define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0
/***********************************************************************************/
/* Structure used in VRAM_UsageByFirmwareTable */
/* Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm */
/* at running time. */
/* note2: From RV770, the memory is more than 32bit addressable, so we will change */
/* ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains */
/* exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware */
/* (in offset to start of memory address) is KB aligned instead of byte aligend. */
/***********************************************************************************/
# define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1
typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO {
ULONG ulStartAddrUsedByFirmware ;
USHORT usFirmwareUseInKb ;
USHORT usReserved ;
} ATOM_FIRMWARE_VRAM_RESERVE_INFO ;
typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_FIRMWARE_VRAM_RESERVE_INFO
asFirmwareVramReserveInfo [ ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO ] ;
} ATOM_VRAM_USAGE_BY_FIRMWARE ;
/****************************************************************************/
/* Structure used in GPIO_Pin_LUTTable */
/****************************************************************************/
typedef struct _ATOM_GPIO_PIN_ASSIGNMENT {
USHORT usGpioPin_AIndex ;
UCHAR ucGpioPinBitShift ;
UCHAR ucGPIO_ID ;
} ATOM_GPIO_PIN_ASSIGNMENT ;
typedef struct _ATOM_GPIO_PIN_LUT {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin [ 1 ] ;
} ATOM_GPIO_PIN_LUT ;
/****************************************************************************/
/* Structure used in ComponentVideoInfoTable */
/****************************************************************************/
# define GPIO_PIN_ACTIVE_HIGH 0x1
# define MAX_SUPPORTED_CV_STANDARDS 5
/* definitions for ATOM_D_INFO.ucSettings */
# define ATOM_GPIO_SETTINGS_BITSHIFT_MASK 0x1F /* [4:0] */
# define ATOM_GPIO_SETTINGS_RESERVED_MASK 0x60 /* [6:5] = must be zeroed out */
# define ATOM_GPIO_SETTINGS_ACTIVE_MASK 0x80 /* [7] */
typedef struct _ATOM_GPIO_INFO {
USHORT usAOffset ;
UCHAR ucSettings ;
UCHAR ucReserved ;
} ATOM_GPIO_INFO ;
/* definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector) */
# define ATOM_CV_RESTRICT_FORMAT_SELECTION 0x2
/* definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i */
# define ATOM_GPIO_DEFAULT_MODE_EN 0x80 /* [7]; */
# define ATOM_GPIO_SETTING_PERMODE_MASK 0x7F /* [6:0] */
/* definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode */
/* Line 3 out put 5V. */
# define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A 0x01 /* represent gpio 3 state for 16:9 */
# define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B 0x02 /* represent gpio 4 state for 16:9 */
# define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT 0x0
/* Line 3 out put 2.2V */
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04 /* represent gpio 3 state for 4:3 Letter box */
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08 /* represent gpio 4 state for 4:3 Letter box */
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2
/* Line 3 out put 0V */
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A 0x10 /* represent gpio 3 state for 4:3 */
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B 0x20 /* represent gpio 4 state for 4:3 */
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT 0x4
# define ATOM_CV_LINE3_ASPECTRATIO_MASK 0x3F /* bit [5:0] */
# define ATOM_CV_LINE3_ASPECTRATIO_EXIST 0x80 /* bit 7 */
/* GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks. */
# define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A 3 /* bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */
# define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B 4 /* bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */
typedef struct _ATOM_COMPONENT_VIDEO_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMask_PinRegisterIndex ;
USHORT usEN_PinRegisterIndex ;
USHORT usY_PinRegisterIndex ;
USHORT usA_PinRegisterIndex ;
UCHAR ucBitShift ;
UCHAR ucPinActiveState ; /* ucPinActiveState: Bit0=1 active high, =0 active low */
ATOM_DTD_FORMAT sReserved ; /* must be zeroed out */
UCHAR ucMiscInfo ;
UCHAR uc480i ;
UCHAR uc480p ;
UCHAR uc720p ;
UCHAR uc1080i ;
UCHAR ucLetterBoxMode ;
UCHAR ucReserved [ 3 ] ;
UCHAR ucNumOfWbGpioBlocks ; /* For Component video D-Connector support. If zere, NTSC type connector */
ATOM_GPIO_INFO aWbGpioStateBlock [ MAX_SUPPORTED_CV_STANDARDS ] ;
ATOM_DTD_FORMAT aModeTimings [ MAX_SUPPORTED_CV_STANDARDS ] ;
} ATOM_COMPONENT_VIDEO_INFO ;
/* ucTableFormatRevision=2 */
/* ucTableContentRevision=1 */
typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21 {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucMiscInfo ;
UCHAR uc480i ;
UCHAR uc480p ;
UCHAR uc720p ;
UCHAR uc1080i ;
UCHAR ucReserved ;
UCHAR ucLetterBoxMode ;
UCHAR ucNumOfWbGpioBlocks ; /* For Component video D-Connector support. If zere, NTSC type connector */
ATOM_GPIO_INFO aWbGpioStateBlock [ MAX_SUPPORTED_CV_STANDARDS ] ;
ATOM_DTD_FORMAT aModeTimings [ MAX_SUPPORTED_CV_STANDARDS ] ;
} ATOM_COMPONENT_VIDEO_INFO_V21 ;
# define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21
/****************************************************************************/
/* Structure used in object_InfoTable */
/****************************************************************************/
typedef struct _ATOM_OBJECT_HEADER {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usDeviceSupport ;
USHORT usConnectorObjectTableOffset ;
USHORT usRouterObjectTableOffset ;
USHORT usEncoderObjectTableOffset ;
USHORT usProtectionObjectTableOffset ; /* only available when Protection block is independent. */
USHORT usDisplayPathTableOffset ;
} ATOM_OBJECT_HEADER ;
typedef struct _ATOM_DISPLAY_OBJECT_PATH {
USHORT usDeviceTag ; /* supported device */
USHORT usSize ; /* the size of ATOM_DISPLAY_OBJECT_PATH */
USHORT usConnObjectId ; /* Connector Object ID */
USHORT usGPUObjectId ; /* GPU ID */
USHORT usGraphicObjIds [ 1 ] ; /* 1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. */
} ATOM_DISPLAY_OBJECT_PATH ;
typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE {
UCHAR ucNumOfDispPath ;
UCHAR ucVersion ;
UCHAR ucPadding [ 2 ] ;
ATOM_DISPLAY_OBJECT_PATH asDispPath [ 1 ] ;
} ATOM_DISPLAY_OBJECT_PATH_TABLE ;
typedef struct _ATOM_OBJECT /* each object has this structure */
{
USHORT usObjectID ;
USHORT usSrcDstTableOffset ;
USHORT usRecordOffset ; /* this pointing to a bunch of records defined below */
USHORT usReserved ;
} ATOM_OBJECT ;
typedef struct _ATOM_OBJECT_TABLE /* Above 4 object table offset pointing to a bunch of objects all have this structure */
{
UCHAR ucNumberOfObjects ;
UCHAR ucPadding [ 3 ] ;
ATOM_OBJECT asObjects [ 1 ] ;
} ATOM_OBJECT_TABLE ;
typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT /* usSrcDstTableOffset pointing to this structure */
{
UCHAR ucNumberOfSrc ;
USHORT usSrcObjectID [ 1 ] ;
UCHAR ucNumberOfDst ;
USHORT usDstObjectID [ 1 ] ;
} ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT ;
/* Related definitions, all records are differnt but they have a commond header */
typedef struct _ATOM_COMMON_RECORD_HEADER {
UCHAR ucRecordType ; /* An emun to indicate the record type */
UCHAR ucRecordSize ; /* The size of the whole record in byte */
} ATOM_COMMON_RECORD_HEADER ;
# define ATOM_I2C_RECORD_TYPE 1
# define ATOM_HPD_INT_RECORD_TYPE 2
# define ATOM_OUTPUT_PROTECTION_RECORD_TYPE 3
# define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE 4
# define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE 5 /* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
# define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE 6 /* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
# define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE 7
# define ATOM_JTAG_RECORD_TYPE 8 /* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
# define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE 9
# define ATOM_ENCODER_DVO_CF_RECORD_TYPE 10
# define ATOM_CONNECTOR_CF_RECORD_TYPE 11
# define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE 12
# define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE 13
# define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE 14
# define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15
/* Must be updated when new record type is added,equal to that record definition! */
# define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_CONNECTOR_CF_RECORD_TYPE
typedef struct _ATOM_I2C_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
ATOM_I2C_ID_CONFIG sucI2cId ;
UCHAR ucI2CAddr ; /* The slave address, it's 0 when the record is attached to connector for DDC */
} ATOM_I2C_RECORD ;
typedef struct _ATOM_HPD_INT_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucHPDIntGPIOID ; /* Corresponding block in GPIO_PIN_INFO table gives the pin info */
UCHAR ucPluggged_PinState ;
} ATOM_HPD_INT_RECORD ;
typedef struct _ATOM_OUTPUT_PROTECTION_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucProtectionFlag ;
UCHAR ucReserved ;
} ATOM_OUTPUT_PROTECTION_RECORD ;
typedef struct _ATOM_CONNECTOR_DEVICE_TAG {
ULONG ulACPIDeviceEnum ; /* Reserved for now */
USHORT usDeviceID ; /* This Id is same as "ATOM_DEVICE_XXX_SUPPORT" */
USHORT usPadding ;
} ATOM_CONNECTOR_DEVICE_TAG ;
typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucNumberOfDevice ;
UCHAR ucReserved ;
ATOM_CONNECTOR_DEVICE_TAG asDeviceTag [ 1 ] ; /* This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation */
} ATOM_CONNECTOR_DEVICE_TAG_RECORD ;
typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucConfigGPIOID ;
UCHAR ucConfigGPIOState ; /* Set to 1 when it's active high to enable external flow in */
UCHAR ucFlowinGPIPID ;
UCHAR ucExtInGPIPID ;
} ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD ;
typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucCTL1GPIO_ID ;
UCHAR ucCTL1GPIOState ; /* Set to 1 when it's active high */
UCHAR ucCTL2GPIO_ID ;
UCHAR ucCTL2GPIOState ; /* Set to 1 when it's active high */
UCHAR ucCTL3GPIO_ID ;
UCHAR ucCTL3GPIOState ; /* Set to 1 when it's active high */
UCHAR ucCTLFPGA_IN_ID ;
UCHAR ucPadding [ 3 ] ;
} ATOM_ENCODER_FPGA_CONTROL_RECORD ;
typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucGPIOID ; /* Corresponding block in GPIO_PIN_INFO table gives the pin info */
UCHAR ucTVActiveState ; /* Indicating when the pin==0 or 1 when TV is connected */
} ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD ;
typedef struct _ATOM_JTAG_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucTMSGPIO_ID ;
UCHAR ucTMSGPIOState ; /* Set to 1 when it's active high */
UCHAR ucTCKGPIO_ID ;
UCHAR ucTCKGPIOState ; /* Set to 1 when it's active high */
UCHAR ucTDOGPIO_ID ;
UCHAR ucTDOGPIOState ; /* Set to 1 when it's active high */
UCHAR ucTDIGPIO_ID ;
UCHAR ucTDIGPIOState ; /* Set to 1 when it's active high */
UCHAR ucPadding [ 2 ] ;
} ATOM_JTAG_RECORD ;
/* The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually */
typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR {
UCHAR ucGPIOID ; /* GPIO_ID, find the corresponding ID in GPIO_LUT table */
UCHAR ucGPIO_PinState ; /* Pin state showing how to set-up the pin */
} ATOM_GPIO_PIN_CONTROL_PAIR ;
typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucFlags ; /* Future expnadibility */
UCHAR ucNumberOfPins ; /* Number of GPIO pins used to control the object */
ATOM_GPIO_PIN_CONTROL_PAIR asGpio [ 1 ] ; /* the real gpio pin pair determined by number of pins ucNumberOfPins */
} ATOM_OBJECT_GPIO_CNTL_RECORD ;
/* Definitions for GPIO pin state */
# define GPIO_PIN_TYPE_INPUT 0x00
# define GPIO_PIN_TYPE_OUTPUT 0x10
# define GPIO_PIN_TYPE_HW_CONTROL 0x20
/* For GPIO_PIN_TYPE_OUTPUT the following is defined */
# define GPIO_PIN_OUTPUT_STATE_MASK 0x01
# define GPIO_PIN_OUTPUT_STATE_SHIFT 0
# define GPIO_PIN_STATE_ACTIVE_LOW 0x0
# define GPIO_PIN_STATE_ACTIVE_HIGH 0x1
typedef struct _ATOM_ENCODER_DVO_CF_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
ULONG ulStrengthControl ; /* DVOA strength control for CF */
UCHAR ucPadding [ 2 ] ;
} ATOM_ENCODER_DVO_CF_RECORD ;
/* value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle */
# define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1
# define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2
typedef struct _ATOM_CONNECTOR_CF_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
USHORT usMaxPixClk ;
UCHAR ucFlowCntlGpioId ;
UCHAR ucSwapCntlGpioId ;
UCHAR ucConnectedDvoBundle ;
UCHAR ucPadding ;
} ATOM_CONNECTOR_CF_RECORD ;
typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
ATOM_DTD_FORMAT asTiming ;
} ATOM_CONNECTOR_HARDCODE_DTD_RECORD ;
typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ; /* ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE */
UCHAR ucSubConnectorType ; /* CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A */
UCHAR ucReserved ;
} ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD ;
typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucMuxType ; /* decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state */
UCHAR ucMuxControlPin ;
UCHAR ucMuxState [ 2 ] ; /* for alligment purpose */
} ATOM_ROUTER_DDC_PATH_SELECT_RECORD ;
typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD {
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucMuxType ;
UCHAR ucMuxControlPin ;
UCHAR ucMuxState [ 2 ] ; /* for alligment purpose */
} ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD ;
/* define ucMuxType */
# define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f
# define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01
/****************************************************************************/
/* ASIC voltage data table */
/****************************************************************************/
typedef struct _ATOM_VOLTAGE_INFO_HEADER {
USHORT usVDDCBaseLevel ; /* In number of 50mv unit */
USHORT usReserved ; /* For possible extension table offset */
UCHAR ucNumOfVoltageEntries ;
UCHAR ucBytesPerVoltageEntry ;
UCHAR ucVoltageStep ; /* Indicating in how many mv increament is one step, 0.5mv unit */
UCHAR ucDefaultVoltageEntry ;
UCHAR ucVoltageControlI2cLine ;
UCHAR ucVoltageControlAddress ;
UCHAR ucVoltageControlOffset ;
} ATOM_VOLTAGE_INFO_HEADER ;
typedef struct _ATOM_VOLTAGE_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_VOLTAGE_INFO_HEADER viHeader ;
UCHAR ucVoltageEntries [ 64 ] ; /* 64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry */
} ATOM_VOLTAGE_INFO ;
typedef struct _ATOM_VOLTAGE_FORMULA {
USHORT usVoltageBaseLevel ; /* In number of 1mv unit */
USHORT usVoltageStep ; /* Indicating in how many mv increament is one step, 1mv unit */
UCHAR ucNumOfVoltageEntries ; /* Number of Voltage Entry, which indicate max Voltage */
UCHAR ucFlag ; /* bit0=0 :step is 1mv =1 0.5mv */
UCHAR ucBaseVID ; /* if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep */
UCHAR ucReserved ;
UCHAR ucVIDAdjustEntries [ 32 ] ; /* 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries */
} ATOM_VOLTAGE_FORMULA ;
typedef struct _ATOM_VOLTAGE_CONTROL {
UCHAR ucVoltageControlId ; /* Indicate it is controlled by I2C or GPIO or HW state machine */
UCHAR ucVoltageControlI2cLine ;
UCHAR ucVoltageControlAddress ;
UCHAR ucVoltageControlOffset ;
USHORT usGpioPin_AIndex ; /* GPIO_PAD register index */
UCHAR ucGpioPinBitShift [ 9 ] ; /* at most 8 pin support 255 VIDs, termintate with 0xff */
UCHAR ucReserved ;
} ATOM_VOLTAGE_CONTROL ;
/* Define ucVoltageControlId */
# define VOLTAGE_CONTROLLED_BY_HW 0x00
# define VOLTAGE_CONTROLLED_BY_I2C_MASK 0x7F
# define VOLTAGE_CONTROLLED_BY_GPIO 0x80
# define VOLTAGE_CONTROL_ID_LM64 0x01 /* I2C control, used for R5xx Core Voltage */
# define VOLTAGE_CONTROL_ID_DAC 0x02 /* I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI */
# define VOLTAGE_CONTROL_ID_VT116xM 0x03 /* I2C control, used for R6xx Core Voltage */
# define VOLTAGE_CONTROL_ID_DS4402 0x04
typedef struct _ATOM_VOLTAGE_OBJECT {
UCHAR ucVoltageType ; /* Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI */
UCHAR ucSize ; /* Size of Object */
ATOM_VOLTAGE_CONTROL asControl ; /* describ how to control */
ATOM_VOLTAGE_FORMULA asFormula ; /* Indicate How to convert real Voltage to VID */
} ATOM_VOLTAGE_OBJECT ;
typedef struct _ATOM_VOLTAGE_OBJECT_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_VOLTAGE_OBJECT asVoltageObj [ 3 ] ; /* Info for Voltage control */
} ATOM_VOLTAGE_OBJECT_INFO ;
typedef struct _ATOM_LEAKID_VOLTAGE {
UCHAR ucLeakageId ;
UCHAR ucReserved ;
USHORT usVoltage ;
} ATOM_LEAKID_VOLTAGE ;
typedef struct _ATOM_ASIC_PROFILE_VOLTAGE {
UCHAR ucProfileId ;
UCHAR ucReserved ;
USHORT usSize ;
USHORT usEfuseSpareStartAddr ;
USHORT usFuseIndex [ 8 ] ; /* from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id, */
ATOM_LEAKID_VOLTAGE asLeakVol [ 2 ] ; /* Leakid and relatd voltage */
} ATOM_ASIC_PROFILE_VOLTAGE ;
/* ucProfileId */
# define ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE 1
# define ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE 1
# define ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE 2
typedef struct _ATOM_ASIC_PROFILING_INFO {
ATOM_COMMON_TABLE_HEADER asHeader ;
ATOM_ASIC_PROFILE_VOLTAGE asVoltage ;
} ATOM_ASIC_PROFILING_INFO ;
typedef struct _ATOM_POWER_SOURCE_OBJECT {
UCHAR ucPwrSrcId ; /* Power source */
UCHAR ucPwrSensorType ; /* GPIO, I2C or none */
UCHAR ucPwrSensId ; /* if GPIO detect, it is GPIO id, if I2C detect, it is I2C id */
UCHAR ucPwrSensSlaveAddr ; /* Slave address if I2C detect */
UCHAR ucPwrSensRegIndex ; /* I2C register Index if I2C detect */
UCHAR ucPwrSensRegBitMask ; /* detect which bit is used if I2C detect */
UCHAR ucPwrSensActiveState ; /* high active or low active */
UCHAR ucReserve [ 3 ] ; /* reserve */
USHORT usSensPwr ; /* in unit of watt */
} ATOM_POWER_SOURCE_OBJECT ;
typedef struct _ATOM_POWER_SOURCE_INFO {
ATOM_COMMON_TABLE_HEADER asHeader ;
UCHAR asPwrbehave [ 16 ] ;
ATOM_POWER_SOURCE_OBJECT asPwrObj [ 1 ] ;
} ATOM_POWER_SOURCE_INFO ;
/* Define ucPwrSrcId */
# define POWERSOURCE_PCIE_ID1 0x00
# define POWERSOURCE_6PIN_CONNECTOR_ID1 0x01
# define POWERSOURCE_8PIN_CONNECTOR_ID1 0x02
# define POWERSOURCE_6PIN_CONNECTOR_ID2 0x04
# define POWERSOURCE_8PIN_CONNECTOR_ID2 0x08
/* define ucPwrSensorId */
# define POWER_SENSOR_ALWAYS 0x00
# define POWER_SENSOR_GPIO 0x01
# define POWER_SENSOR_I2C 0x02
/**************************************************************************/
/* This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design */
/* Memory SS Info Table */
/* Define Memory Clock SS chip ID */
# define ICS91719 1
# define ICS91720 2
/* Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol */
typedef struct _ATOM_I2C_DATA_RECORD {
UCHAR ucNunberOfBytes ; /* Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop" */
UCHAR ucI2CData [ 1 ] ; /* I2C data in bytes, should be less than 16 bytes usually */
} ATOM_I2C_DATA_RECORD ;
/* Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information */
typedef struct _ATOM_I2C_DEVICE_SETUP_INFO {
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ; /* I2C line and HW/SW assisted cap. */
UCHAR ucSSChipID ; /* SS chip being used */
UCHAR ucSSChipSlaveAddr ; /* Slave Address to set up this SS chip */
UCHAR ucNumOfI2CDataRecords ; /* number of data block */
ATOM_I2C_DATA_RECORD asI2CData [ 1 ] ;
} ATOM_I2C_DEVICE_SETUP_INFO ;
/* ========================================================================================== */
typedef struct _ATOM_ASIC_MVDD_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup [ 1 ] ;
} ATOM_ASIC_MVDD_INFO ;
/* ========================================================================================== */
# define ATOM_MCLK_SS_INFO ATOM_ASIC_MVDD_INFO
/* ========================================================================================== */
/**************************************************************************/
typedef struct _ATOM_ASIC_SS_ASSIGNMENT {
ULONG ulTargetClockRange ; /* Clock Out frequence (VCO ), in unit of 10Khz */
USHORT usSpreadSpectrumPercentage ; /* in unit of 0.01% */
USHORT usSpreadRateInKhz ; /* in unit of kHz, modulation freq */
UCHAR ucClockIndication ; /* Indicate which clock source needs SS */
UCHAR ucSpreadSpectrumMode ; /* Bit1=0 Down Spread,=1 Center Spread. */
UCHAR ucReserved [ 2 ] ;
} ATOM_ASIC_SS_ASSIGNMENT ;
/* Define ucSpreadSpectrumType */
# define ASIC_INTERNAL_MEMORY_SS 1
# define ASIC_INTERNAL_ENGINE_SS 2
# define ASIC_INTERNAL_UVD_SS 3
typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum [ 4 ] ;
} ATOM_ASIC_INTERNAL_SS_INFO ;
/* ==============================Scratch Pad Definition Portion=============================== */
# define ATOM_DEVICE_CONNECT_INFO_DEF 0
# define ATOM_ROM_LOCATION_DEF 1
# define ATOM_TV_STANDARD_DEF 2
# define ATOM_ACTIVE_INFO_DEF 3
# define ATOM_LCD_INFO_DEF 4
# define ATOM_DOS_REQ_INFO_DEF 5
# define ATOM_ACC_CHANGE_INFO_DEF 6
# define ATOM_DOS_MODE_INFO_DEF 7
# define ATOM_I2C_CHANNEL_STATUS_DEF 8
# define ATOM_I2C_CHANNEL_STATUS1_DEF 9
/* BIOS_0_SCRATCH Definition */
# define ATOM_S0_CRT1_MONO 0x00000001L
# define ATOM_S0_CRT1_COLOR 0x00000002L
# define ATOM_S0_CRT1_MASK (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)
# define ATOM_S0_TV1_COMPOSITE_A 0x00000004L
# define ATOM_S0_TV1_SVIDEO_A 0x00000008L
# define ATOM_S0_TV1_MASK_A (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)
# define ATOM_S0_CV_A 0x00000010L
# define ATOM_S0_CV_DIN_A 0x00000020L
# define ATOM_S0_CV_MASK_A (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)
# define ATOM_S0_CRT2_MONO 0x00000100L
# define ATOM_S0_CRT2_COLOR 0x00000200L
# define ATOM_S0_CRT2_MASK (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)
# define ATOM_S0_TV1_COMPOSITE 0x00000400L
# define ATOM_S0_TV1_SVIDEO 0x00000800L
# define ATOM_S0_TV1_SCART 0x00004000L
# define ATOM_S0_TV1_MASK (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)
# define ATOM_S0_CV 0x00001000L
# define ATOM_S0_CV_DIN 0x00002000L
# define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN)
# define ATOM_S0_DFP1 0x00010000L
# define ATOM_S0_DFP2 0x00020000L
# define ATOM_S0_LCD1 0x00040000L
# define ATOM_S0_LCD2 0x00080000L
# define ATOM_S0_TV2 0x00100000L
# define ATOM_S0_DFP3 0x00200000L
# define ATOM_S0_DFP4 0x00400000L
# define ATOM_S0_DFP5 0x00800000L
# define ATOM_S0_DFP_MASK \
( ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5 )
# define ATOM_S0_FAD_REGISTER_BUG 0x02000000L /* If set, indicates we are running a PCIE asic with */
/* the FAD/HDP reg access bug. Bit is read by DAL */
# define ATOM_S0_THERMAL_STATE_MASK 0x1C000000L
# define ATOM_S0_THERMAL_STATE_SHIFT 26
# define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
# define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29
# define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1
# define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2
# define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
/* Byte aligned defintion for BIOS usage */
# define ATOM_S0_CRT1_MONOb0 0x01
# define ATOM_S0_CRT1_COLORb0 0x02
# define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
# define ATOM_S0_TV1_COMPOSITEb0 0x04
# define ATOM_S0_TV1_SVIDEOb0 0x08
# define ATOM_S0_TV1_MASKb0 (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)
# define ATOM_S0_CVb0 0x10
# define ATOM_S0_CV_DINb0 0x20
# define ATOM_S0_CV_MASKb0 (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)
# define ATOM_S0_CRT2_MONOb1 0x01
# define ATOM_S0_CRT2_COLORb1 0x02
# define ATOM_S0_CRT2_MASKb1 (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)
# define ATOM_S0_TV1_COMPOSITEb1 0x04
# define ATOM_S0_TV1_SVIDEOb1 0x08
# define ATOM_S0_TV1_SCARTb1 0x40
# define ATOM_S0_TV1_MASKb1 (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)
# define ATOM_S0_CVb1 0x10
# define ATOM_S0_CV_DINb1 0x20
# define ATOM_S0_CV_MASKb1 (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)
# define ATOM_S0_DFP1b2 0x01
# define ATOM_S0_DFP2b2 0x02
# define ATOM_S0_LCD1b2 0x04
# define ATOM_S0_LCD2b2 0x08
# define ATOM_S0_TV2b2 0x10
# define ATOM_S0_DFP3b2 0x20
# define ATOM_S0_THERMAL_STATE_MASKb3 0x1C
# define ATOM_S0_THERMAL_STATE_SHIFTb3 2
# define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
# define ATOM_S0_LCD1_SHIFT 18
/* BIOS_1_SCRATCH Definition */
# define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL
# define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L
/* BIOS_2_SCRATCH Definition */
# define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL
# define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L
# define ATOM_S2_CURRENT_BL_LEVEL_SHIFT 8
# define ATOM_S2_CRT1_DPMS_STATE 0x00010000L
# define ATOM_S2_LCD1_DPMS_STATE 0x00020000L
# define ATOM_S2_TV1_DPMS_STATE 0x00040000L
# define ATOM_S2_DFP1_DPMS_STATE 0x00080000L
# define ATOM_S2_CRT2_DPMS_STATE 0x00100000L
# define ATOM_S2_LCD2_DPMS_STATE 0x00200000L
# define ATOM_S2_TV2_DPMS_STATE 0x00400000L
# define ATOM_S2_DFP2_DPMS_STATE 0x00800000L
# define ATOM_S2_CV_DPMS_STATE 0x01000000L
# define ATOM_S2_DFP3_DPMS_STATE 0x02000000L
# define ATOM_S2_DFP4_DPMS_STATE 0x04000000L
# define ATOM_S2_DFP5_DPMS_STATE 0x08000000L
# define ATOM_S2_DFP_DPM_STATE \
( ATOM_S2_DFP1_DPMS_STATE | ATOM_S2_DFP2_DPMS_STATE | \
ATOM_S2_DFP3_DPMS_STATE | ATOM_S2_DFP4_DPMS_STATE | \
ATOM_S2_DFP5_DPMS_STATE )
# define ATOM_S2_DEVICE_DPMS_STATE \
( ATOM_S2_CRT1_DPMS_STATE + ATOM_S2_LCD1_DPMS_STATE + \
ATOM_S2_TV1_DPMS_STATE + ATOM_S2_DFP_DPMS_STATE + \
ATOM_S2_CRT2_DPMS_STATE + ATOM_S2_LCD2_DPMS_STATE + \
ATOM_S2_TV2_DPMS_STATE + ATOM_S2_CV_DPMS_STATE )
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE 0x10000000L
# define ATOM_S2_VRI_BRIGHT_ENABLE 0x20000000L
# define ATOM_S2_DISPLAY_ROTATION_0_DEGREE 0x0
# define ATOM_S2_DISPLAY_ROTATION_90_DEGREE 0x1
# define ATOM_S2_DISPLAY_ROTATION_180_DEGREE 0x2
# define ATOM_S2_DISPLAY_ROTATION_270_DEGREE 0x3
# define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
# define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L
/* Byte aligned defintion for BIOS usage */
# define ATOM_S2_TV1_STANDARD_MASKb0 0x0F
# define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
# define ATOM_S2_CRT1_DPMS_STATEb2 0x01
# define ATOM_S2_LCD1_DPMS_STATEb2 0x02
# define ATOM_S2_TV1_DPMS_STATEb2 0x04
# define ATOM_S2_DFP1_DPMS_STATEb2 0x08
# define ATOM_S2_CRT2_DPMS_STATEb2 0x10
# define ATOM_S2_LCD2_DPMS_STATEb2 0x20
# define ATOM_S2_TV2_DPMS_STATEb2 0x40
# define ATOM_S2_DFP2_DPMS_STATEb2 0x80
# define ATOM_S2_CV_DPMS_STATEb3 0x01
# define ATOM_S2_DFP3_DPMS_STATEb3 0x02
# define ATOM_S2_DFP4_DPMS_STATEb3 0x04
# define ATOM_S2_DFP5_DPMS_STATEb3 0x08
# define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10
# define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20
# define ATOM_S2_ROTATION_STATE_MASKb3 0xC0
/* BIOS_3_SCRATCH Definition */
# define ATOM_S3_CRT1_ACTIVE 0x00000001L
# define ATOM_S3_LCD1_ACTIVE 0x00000002L
# define ATOM_S3_TV1_ACTIVE 0x00000004L
# define ATOM_S3_DFP1_ACTIVE 0x00000008L
# define ATOM_S3_CRT2_ACTIVE 0x00000010L
# define ATOM_S3_LCD2_ACTIVE 0x00000020L
# define ATOM_S3_TV2_ACTIVE 0x00000040L
# define ATOM_S3_DFP2_ACTIVE 0x00000080L
# define ATOM_S3_CV_ACTIVE 0x00000100L
# define ATOM_S3_DFP3_ACTIVE 0x00000200L
# define ATOM_S3_DFP4_ACTIVE 0x00000400L
# define ATOM_S3_DFP5_ACTIVE 0x00000800L
# define ATOM_S3_DEVICE_ACTIVE_MASK 0x000003FFL
# define ATOM_S3_LCD_FULLEXPANSION_ACTIVE 0x00001000L
# define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L
# define ATOM_S3_CRT1_CRTC_ACTIVE 0x00010000L
# define ATOM_S3_LCD1_CRTC_ACTIVE 0x00020000L
# define ATOM_S3_TV1_CRTC_ACTIVE 0x00040000L
# define ATOM_S3_DFP1_CRTC_ACTIVE 0x00080000L
# define ATOM_S3_CRT2_CRTC_ACTIVE 0x00100000L
# define ATOM_S3_LCD2_CRTC_ACTIVE 0x00200000L
# define ATOM_S3_TV2_CRTC_ACTIVE 0x00400000L
# define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L
# define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L
# define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L
# define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L
# define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L
# define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
# define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L
# define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L
# define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L
/* Byte aligned defintion for BIOS usage */
# define ATOM_S3_CRT1_ACTIVEb0 0x01
# define ATOM_S3_LCD1_ACTIVEb0 0x02
# define ATOM_S3_TV1_ACTIVEb0 0x04
# define ATOM_S3_DFP1_ACTIVEb0 0x08
# define ATOM_S3_CRT2_ACTIVEb0 0x10
# define ATOM_S3_LCD2_ACTIVEb0 0x20
# define ATOM_S3_TV2_ACTIVEb0 0x40
# define ATOM_S3_DFP2_ACTIVEb0 0x80
# define ATOM_S3_CV_ACTIVEb1 0x01
# define ATOM_S3_DFP3_ACTIVEb1 0x02
# define ATOM_S3_DFP4_ACTIVEb1 0x04
# define ATOM_S3_DFP5_ACTIVEb1 0x08
# define ATOM_S3_ACTIVE_CRTC1w0 0xFFF
# define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01
# define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02
# define ATOM_S3_TV1_CRTC_ACTIVEb2 0x04
# define ATOM_S3_DFP1_CRTC_ACTIVEb2 0x08
# define ATOM_S3_CRT2_CRTC_ACTIVEb2 0x10
# define ATOM_S3_LCD2_CRTC_ACTIVEb2 0x20
# define ATOM_S3_TV2_CRTC_ACTIVEb2 0x40
# define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80
# define ATOM_S3_CV_CRTC_ACTIVEb3 0x01
# define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02
# define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04
# define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08
# define ATOM_S3_ACTIVE_CRTC2w1 0xFFF
# define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3 0x20
# define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40
# define ATOM_S3_RQST_GPU_USE_MIN_PWRb3 0x80
/* BIOS_4_SCRATCH Definition */
# define ATOM_S4_LCD1_PANEL_ID_MASK 0x000000FFL
# define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L
# define ATOM_S4_LCD1_REFRESH_SHIFT 8
/* Byte aligned defintion for BIOS usage */
# define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF
# define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0
# define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0
/* BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!! */
# define ATOM_S5_DOS_REQ_CRT1b0 0x01
# define ATOM_S5_DOS_REQ_LCD1b0 0x02
# define ATOM_S5_DOS_REQ_TV1b0 0x04
# define ATOM_S5_DOS_REQ_DFP1b0 0x08
# define ATOM_S5_DOS_REQ_CRT2b0 0x10
# define ATOM_S5_DOS_REQ_LCD2b0 0x20
# define ATOM_S5_DOS_REQ_TV2b0 0x40
# define ATOM_S5_DOS_REQ_DFP2b0 0x80
# define ATOM_S5_DOS_REQ_CVb1 0x01
# define ATOM_S5_DOS_REQ_DFP3b1 0x02
# define ATOM_S5_DOS_REQ_DFP4b1 0x04
# define ATOM_S5_DOS_REQ_DFP5b1 0x08
# define ATOM_S5_DOS_REQ_DEVICEw0 0x03FF
# define ATOM_S5_DOS_REQ_CRT1 0x0001
# define ATOM_S5_DOS_REQ_LCD1 0x0002
# define ATOM_S5_DOS_REQ_TV1 0x0004
# define ATOM_S5_DOS_REQ_DFP1 0x0008
# define ATOM_S5_DOS_REQ_CRT2 0x0010
# define ATOM_S5_DOS_REQ_LCD2 0x0020
# define ATOM_S5_DOS_REQ_TV2 0x0040
# define ATOM_S5_DOS_REQ_DFP2 0x0080
# define ATOM_S5_DOS_REQ_CV 0x0100
# define ATOM_S5_DOS_REQ_DFP3 0x0200
# define ATOM_S5_DOS_REQ_DFP4 0x0400
# define ATOM_S5_DOS_REQ_DFP5 0x0800
# define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0
# define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0
# define ATOM_S5_DOS_FORCE_CRT2b2 ATOM_S5_DOS_REQ_CRT2b0
# define ATOM_S5_DOS_FORCE_CVb3 ATOM_S5_DOS_REQ_CVb1
# define ATOM_S5_DOS_FORCE_DEVICEw1 \
( ATOM_S5_DOS_FORCE_CRT1b2 + ATOM_S5_DOS_FORCE_TV1b2 + \
ATOM_S5_DOS_FORCE_CRT2b2 + ( ATOM_S5_DOS_FORCE_CVb3 < < 8 ) )
/* BIOS_6_SCRATCH Definition */
# define ATOM_S6_DEVICE_CHANGE 0x00000001L
# define ATOM_S6_SCALER_CHANGE 0x00000002L
# define ATOM_S6_LID_CHANGE 0x00000004L
# define ATOM_S6_DOCKING_CHANGE 0x00000008L
# define ATOM_S6_ACC_MODE 0x00000010L
# define ATOM_S6_EXT_DESKTOP_MODE 0x00000020L
# define ATOM_S6_LID_STATE 0x00000040L
# define ATOM_S6_DOCK_STATE 0x00000080L
# define ATOM_S6_CRITICAL_STATE 0x00000100L
# define ATOM_S6_HW_I2C_BUSY_STATE 0x00000200L
# define ATOM_S6_THERMAL_STATE_CHANGE 0x00000400L
# define ATOM_S6_INTERRUPT_SET_BY_BIOS 0x00000800L
# define ATOM_S6_REQ_LCD_EXPANSION_FULL 0x00001000L /* Normal expansion Request bit for LCD */
# define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO 0x00002000L /* Aspect ratio expansion Request bit for LCD */
# define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L /* This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion */
# define ATOM_S6_I2C_STATE_CHANGE 0x00008000L /* This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion */
# define ATOM_S6_ACC_REQ_CRT1 0x00010000L
# define ATOM_S6_ACC_REQ_LCD1 0x00020000L
# define ATOM_S6_ACC_REQ_TV1 0x00040000L
# define ATOM_S6_ACC_REQ_DFP1 0x00080000L
# define ATOM_S6_ACC_REQ_CRT2 0x00100000L
# define ATOM_S6_ACC_REQ_LCD2 0x00200000L
# define ATOM_S6_ACC_REQ_TV2 0x00400000L
# define ATOM_S6_ACC_REQ_DFP2 0x00800000L
# define ATOM_S6_ACC_REQ_CV 0x01000000L
# define ATOM_S6_ACC_REQ_DFP3 0x02000000L
# define ATOM_S6_ACC_REQ_DFP4 0x04000000L
# define ATOM_S6_ACC_REQ_DFP5 0x08000000L
# define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L
# define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L
# define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L
# define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L
# define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L
/* Byte aligned defintion for BIOS usage */
# define ATOM_S6_DEVICE_CHANGEb0 0x01
# define ATOM_S6_SCALER_CHANGEb0 0x02
# define ATOM_S6_LID_CHANGEb0 0x04
# define ATOM_S6_DOCKING_CHANGEb0 0x08
# define ATOM_S6_ACC_MODEb0 0x10
# define ATOM_S6_EXT_DESKTOP_MODEb0 0x20
# define ATOM_S6_LID_STATEb0 0x40
# define ATOM_S6_DOCK_STATEb0 0x80
# define ATOM_S6_CRITICAL_STATEb1 0x01
# define ATOM_S6_HW_I2C_BUSY_STATEb1 0x02
# define ATOM_S6_THERMAL_STATE_CHANGEb1 0x04
# define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
# define ATOM_S6_REQ_LCD_EXPANSION_FULLb1 0x10
# define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20
# define ATOM_S6_ACC_REQ_CRT1b2 0x01
# define ATOM_S6_ACC_REQ_LCD1b2 0x02
# define ATOM_S6_ACC_REQ_TV1b2 0x04
# define ATOM_S6_ACC_REQ_DFP1b2 0x08
# define ATOM_S6_ACC_REQ_CRT2b2 0x10
# define ATOM_S6_ACC_REQ_LCD2b2 0x20
# define ATOM_S6_ACC_REQ_TV2b2 0x40
# define ATOM_S6_ACC_REQ_DFP2b2 0x80
# define ATOM_S6_ACC_REQ_CVb3 0x01
# define ATOM_S6_ACC_REQ_DFP3b3 0x02
# define ATOM_S6_ACC_REQ_DFP4b3 0x04
# define ATOM_S6_ACC_REQ_DFP5b3 0x08
# define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0
# define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
# define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
# define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3 0x40
# define ATOM_S6_CONFIG_DISPLAY_CHANGEb3 0x80
# define ATOM_S6_DEVICE_CHANGE_SHIFT 0
# define ATOM_S6_SCALER_CHANGE_SHIFT 1
# define ATOM_S6_LID_CHANGE_SHIFT 2
# define ATOM_S6_DOCKING_CHANGE_SHIFT 3
# define ATOM_S6_ACC_MODE_SHIFT 4
# define ATOM_S6_EXT_DESKTOP_MODE_SHIFT 5
# define ATOM_S6_LID_STATE_SHIFT 6
# define ATOM_S6_DOCK_STATE_SHIFT 7
# define ATOM_S6_CRITICAL_STATE_SHIFT 8
# define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT 9
# define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT 10
# define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT 11
# define ATOM_S6_REQ_SCALER_SHIFT 12
# define ATOM_S6_REQ_SCALER_ARATIO_SHIFT 13
# define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT 14
# define ATOM_S6_I2C_STATE_CHANGE_SHIFT 15
# define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT 28
# define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT 29
# define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT 30
# define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT 31
/* BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!! */
# define ATOM_S7_DOS_MODE_TYPEb0 0x03
# define ATOM_S7_DOS_MODE_VGAb0 0x00
# define ATOM_S7_DOS_MODE_VESAb0 0x01
# define ATOM_S7_DOS_MODE_EXTb0 0x02
# define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C
# define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0
# define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01
# define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF
# define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8
/* BIOS_8_SCRATCH Definition */
# define ATOM_S8_I2C_CHANNEL_BUSY_MASK 0x00000FFFF
# define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK 0x0FFFF0000
# define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT 0
# define ATOM_S8_I2C_ENGINE_BUSY_SHIFT 16
/* BIOS_9_SCRATCH Definition */
# ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
# define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK 0x0000FFFF
# endif
# ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
# define ATOM_S9_I2C_CHANNEL_ABORTED_MASK 0xFFFF0000
# endif
# ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
# define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
# endif
# ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
# define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT 16
# endif
# define ATOM_FLAG_SET 0x20
# define ATOM_FLAG_CLEAR 0
# define CLEAR_ATOM_S6_ACC_MODE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S6_DEVICE_CHANGE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_SCALER_CHANGE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_LID_CHANGE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_LID_STATE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET )
# define CLEAR_ATOM_S6_LID_STATE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S6_DOCK_CHANGE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_DOCK_STATE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET )
# define CLEAR_ATOM_S6_DOCK_STATE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S6_THERMAL_STATE_CHANGE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_CRITICAL_STATE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET )
# define CLEAR_ATOM_S6_CRITICAL_STATE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S6_REQ_SCALER \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET )
# define CLEAR_ATOM_S6_REQ_SCALER \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S6_REQ_SCALER_ARATIO \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
# define CLEAR_ATOM_S6_REQ_SCALER_ARATIO \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S6_I2C_STATE_CHANGE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_DISPLAY_STATE_CHANGE \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_DEVICE_RECONFIG \
( ( ATOM_ACC_CHANGE_INFO_DEF < < 8 ) | \
ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET )
# define CLEAR_ATOM_S0_LCD1 \
( ( ATOM_DEVICE_CONNECT_INFO_DEF < < 8 ) | \
ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S7_DOS_8BIT_DAC_EN \
( ( ATOM_DOS_MODE_INFO_DEF < < 8 ) | \
ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
# define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN \
( ( ATOM_DOS_MODE_INFO_DEF < < 8 ) | \
ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )
/****************************************************************************/
/* Portion II: Definitinos only used in Driver */
/****************************************************************************/
/* Macros used by driver */
# define GetIndexIntoMasterTable(MasterOrData, FieldName) (((char *)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES *)0)->FieldName)-(char *)0) / sizeof(USHORT))
# define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
# define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)
# define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
# define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION
/****************************************************************************/
/* Portion III: Definitinos only used in VBIOS */
/****************************************************************************/
# define ATOM_DAC_SRC 0x80
# define ATOM_SRC_DAC1 0
# define ATOM_SRC_DAC2 0x80
# ifdef UEFI_BUILD
# define USHORT UTEMP
# endif
typedef struct _MEMORY_PLLINIT_PARAMETERS {
ULONG ulTargetMemoryClock ; /* In 10Khz unit */
UCHAR ucAction ; /* not define yet */
UCHAR ucFbDiv_Hi ; /* Fbdiv Hi byte */
UCHAR ucFbDiv ; /* FB value */
UCHAR ucPostDiv ; /* Post div */
} MEMORY_PLLINIT_PARAMETERS ;
# define MEMORY_PLLINIT_PS_ALLOCATION MEMORY_PLLINIT_PARAMETERS
# define GPIO_PIN_WRITE 0x01
# define GPIO_PIN_READ 0x00
typedef struct _GPIO_PIN_CONTROL_PARAMETERS {
UCHAR ucGPIO_ID ; /* return value, read from GPIO pins */
UCHAR ucGPIOBitShift ; /* define which bit in uGPIOBitVal need to be update */
UCHAR ucGPIOBitVal ; /* Set/Reset corresponding bit defined in ucGPIOBitMask */
UCHAR ucAction ; /* =GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write */
} GPIO_PIN_CONTROL_PARAMETERS ;
typedef struct _ENABLE_SCALER_PARAMETERS {
UCHAR ucScaler ; /* ATOM_SCALER1, ATOM_SCALER2 */
UCHAR ucEnable ; /* ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION */
UCHAR ucTVStandard ; /* */
UCHAR ucPadding [ 1 ] ;
} ENABLE_SCALER_PARAMETERS ;
# define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS
/* ucEnable: */
# define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION 0
# define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION 1
# define SCALER_ENABLE_2TAP_ALPHA_MODE 2
# define SCALER_ENABLE_MULTITAP_MODE 3
typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS {
ULONG usHWIconHorzVertPosn ; /* Hardware Icon Vertical position */
UCHAR ucHWIconVertOffset ; /* Hardware Icon Vertical offset */
UCHAR ucHWIconHorzOffset ; /* Hardware Icon Horizontal offset */
UCHAR ucSelection ; /* ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2 */
UCHAR ucEnable ; /* ATOM_ENABLE or ATOM_DISABLE */
} ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS ;
typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION {
ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon ;
ENABLE_CRTC_PARAMETERS sReserved ;
} ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION ;
typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS {
USHORT usHight ; /* Image Hight */
USHORT usWidth ; /* Image Width */
UCHAR ucSurface ; /* Surface 1 or 2 */
UCHAR ucPadding [ 3 ] ;
} ENABLE_GRAPH_SURFACE_PARAMETERS ;
typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2 {
USHORT usHight ; /* Image Hight */
USHORT usWidth ; /* Image Width */
UCHAR ucSurface ; /* Surface 1 or 2 */
UCHAR ucEnable ; /* ATOM_ENABLE or ATOM_DISABLE */
UCHAR ucPadding [ 2 ] ;
} ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2 ;
typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION {
ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface ;
ENABLE_YUV_PS_ALLOCATION sReserved ; /* Don't set this one */
} ENABLE_GRAPH_SURFACE_PS_ALLOCATION ;
typedef struct _MEMORY_CLEAN_UP_PARAMETERS {
USHORT usMemoryStart ; /* in 8Kb boundry, offset from memory base address */
USHORT usMemorySize ; /* 8Kb blocks aligned */
} MEMORY_CLEAN_UP_PARAMETERS ;
# define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS {
USHORT usX_Size ; /* When use as input parameter, usX_Size indicates which CRTC */
USHORT usY_Size ;
} GET_DISPLAY_SURFACE_SIZE_PARAMETERS ;
typedef struct _INDIRECT_IO_ACCESS {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR IOAccessSequence [ 256 ] ;
} INDIRECT_IO_ACCESS ;
# define INDIRECT_READ 0x00
# define INDIRECT_WRITE 0x80
# define INDIRECT_IO_MM 0
# define INDIRECT_IO_PLL 1
# define INDIRECT_IO_MC 2
# define INDIRECT_IO_PCIE 3
# define INDIRECT_IO_PCIEP 4
# define INDIRECT_IO_NBMISC 5
# define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ
# define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE
# define INDIRECT_IO_MC_READ INDIRECT_IO_MC | INDIRECT_READ
# define INDIRECT_IO_MC_WRITE INDIRECT_IO_MC | INDIRECT_WRITE
# define INDIRECT_IO_PCIE_READ INDIRECT_IO_PCIE | INDIRECT_READ
# define INDIRECT_IO_PCIE_WRITE INDIRECT_IO_PCIE | INDIRECT_WRITE
# define INDIRECT_IO_PCIEP_READ INDIRECT_IO_PCIEP | INDIRECT_READ
# define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE
# define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ
# define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE
typedef struct _ATOM_OEM_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ;
} ATOM_OEM_INFO ;
typedef struct _ATOM_TV_MODE {
UCHAR ucVMode_Num ; /* Video mode number */
UCHAR ucTV_Mode_Num ; /* Internal TV mode number */
} ATOM_TV_MODE ;
typedef struct _ATOM_BIOS_INT_TVSTD_MODE {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usTV_Mode_LUT_Offset ; /* Pointer to standard to internal number conversion table */
USHORT usTV_FIFO_Offset ; /* Pointer to FIFO entry table */
USHORT usNTSC_Tbl_Offset ; /* Pointer to SDTV_Mode_NTSC table */
USHORT usPAL_Tbl_Offset ; /* Pointer to SDTV_Mode_PAL table */
USHORT usCV_Tbl_Offset ; /* Pointer to SDTV_Mode_PAL table */
} ATOM_BIOS_INT_TVSTD_MODE ;
typedef struct _ATOM_TV_MODE_SCALER_PTR {
USHORT ucFilter0_Offset ; /* Pointer to filter format 0 coefficients */
USHORT usFilter1_Offset ; /* Pointer to filter format 0 coefficients */
UCHAR ucTV_Mode_Num ;
} ATOM_TV_MODE_SCALER_PTR ;
typedef struct _ATOM_STANDARD_VESA_TIMING {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_DTD_FORMAT aModeTimings [ 16 ] ; /* 16 is not the real array number, just for initial allocation */
} ATOM_STANDARD_VESA_TIMING ;
typedef struct _ATOM_STD_FORMAT {
USHORT usSTD_HDisp ;
USHORT usSTD_VDisp ;
USHORT usSTD_RefreshRate ;
USHORT usReserved ;
} ATOM_STD_FORMAT ;
typedef struct _ATOM_VESA_TO_EXTENDED_MODE {
USHORT usVESA_ModeNumber ;
USHORT usExtendedModeNumber ;
} ATOM_VESA_TO_EXTENDED_MODE ;
typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo [ 76 ] ;
} ATOM_VESA_TO_INTENAL_MODE_LUT ;
/*************** ATOM Memory Related Data Structure ***********************/
typedef struct _ATOM_MEMORY_VENDOR_BLOCK {
UCHAR ucMemoryType ;
UCHAR ucMemoryVendor ;
UCHAR ucAdjMCId ;
UCHAR ucDynClkId ;
ULONG ulDllResetClkRange ;
} ATOM_MEMORY_VENDOR_BLOCK ;
typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG {
# if ATOM_BIG_ENDIAN
ULONG ucMemBlkId : 8 ;
ULONG ulMemClockRange : 24 ;
# else
ULONG ulMemClockRange : 24 ;
ULONG ucMemBlkId : 8 ;
# endif
} ATOM_MEMORY_SETTING_ID_CONFIG ;
typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS {
ATOM_MEMORY_SETTING_ID_CONFIG slAccess ;
ULONG ulAccess ;
} ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ;
typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK {
ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID ;
ULONG aulMemData [ 1 ] ;
} ATOM_MEMORY_SETTING_DATA_BLOCK ;
typedef struct _ATOM_INIT_REG_INDEX_FORMAT {
USHORT usRegIndex ; /* MC register index */
UCHAR ucPreRegDataLength ; /* offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf */
} ATOM_INIT_REG_INDEX_FORMAT ;
typedef struct _ATOM_INIT_REG_BLOCK {
USHORT usRegIndexTblSize ; /* size of asRegIndexBuf */
USHORT usRegDataBlkSize ; /* size of ATOM_MEMORY_SETTING_DATA_BLOCK */
ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf [ 1 ] ;
ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf [ 1 ] ;
} ATOM_INIT_REG_BLOCK ;
# define END_OF_REG_INDEX_BLOCK 0x0ffff
# define END_OF_REG_DATA_BLOCK 0x00000000
# define ATOM_INIT_REG_MASK_FLAG 0x80
# define CLOCK_RANGE_HIGHEST 0x00ffffff
# define VALUE_DWORD SIZEOF ULONG
# define VALUE_SAME_AS_ABOVE 0
# define VALUE_MASK_DWORD 0x84
# define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1)
# define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1)
# define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1)
typedef struct _ATOM_MC_INIT_PARAM_TABLE {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usAdjustARB_SEQDataOffset ;
USHORT usMCInitMemTypeTblOffset ;
USHORT usMCInitCommonTblOffset ;
USHORT usMCInitPowerDownTblOffset ;
ULONG ulARB_SEQDataBuf [ 32 ] ;
ATOM_INIT_REG_BLOCK asMCInitMemType ;
ATOM_INIT_REG_BLOCK asMCInitCommon ;
} ATOM_MC_INIT_PARAM_TABLE ;
# define _4Mx16 0x2
# define _4Mx32 0x3
# define _8Mx16 0x12
# define _8Mx32 0x13
# define _16Mx16 0x22
# define _16Mx32 0x23
# define _32Mx16 0x32
# define _32Mx32 0x33
# define _64Mx8 0x41
# define _64Mx16 0x42
# define SAMSUNG 0x1
# define INFINEON 0x2
# define ELPIDA 0x3
# define ETRON 0x4
# define NANYA 0x5
# define HYNIX 0x6
# define MOSEL 0x7
# define WINBOND 0x8
# define ESMT 0x9
# define MICRON 0xF
# define QIMONDA INFINEON
# define PROMOS MOSEL
/* ///////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// */
# define UCODE_ROM_START_ADDRESS 0x1c000
# define UCODE_SIGNATURE 0x4375434d /* 'MCuC' - MC uCode */
/* uCode block header for reference */
typedef struct _MCuCodeHeader {
ULONG ulSignature ;
UCHAR ucRevision ;
UCHAR ucChecksum ;
UCHAR ucReserved1 ;
UCHAR ucReserved2 ;
USHORT usParametersLength ;
USHORT usUCodeLength ;
USHORT usReserved1 ;
USHORT usReserved2 ;
} MCuCodeHeader ;
/* //////////////////////////////////////////////////////////////////////////////// */
# define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16
# define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF
typedef struct _ATOM_VRAM_MODULE_V1 {
ULONG ulReserved ;
USHORT usEMRSValue ;
USHORT usMRSValue ;
USHORT usReserved ;
UCHAR ucExtMemoryID ; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
UCHAR ucMemoryType ; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved; */
UCHAR ucMemoryVenderID ; /* Predefined,never change across designs or memory type/vender */
UCHAR ucMemoryDeviceCfg ; /* [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */
UCHAR ucRow ; /* Number of Row,in power of 2; */
UCHAR ucColumn ; /* Number of Column,in power of 2; */
UCHAR ucBank ; /* Nunber of Bank; */
UCHAR ucRank ; /* Number of Rank, in power of 2 */
UCHAR ucChannelNum ; /* Number of channel; */
UCHAR ucChannelConfig ; /* [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */
UCHAR ucDefaultMVDDQ_ID ; /* Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */
UCHAR ucDefaultMVDDC_ID ; /* Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */
UCHAR ucReserved [ 2 ] ;
} ATOM_VRAM_MODULE_V1 ;
typedef struct _ATOM_VRAM_MODULE_V2 {
ULONG ulReserved ;
ULONG ulFlags ; /* To enable/disable functionalities based on memory type */
ULONG ulEngineClock ; /* Override of default engine clock for particular memory type */
ULONG ulMemoryClock ; /* Override of default memory clock for particular memory type */
USHORT usEMRS2Value ; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */
USHORT usEMRS3Value ; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */
USHORT usEMRSValue ;
USHORT usMRSValue ;
USHORT usReserved ;
UCHAR ucExtMemoryID ; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
UCHAR ucMemoryType ; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */
UCHAR ucMemoryVenderID ; /* Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */
UCHAR ucMemoryDeviceCfg ; /* [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */
UCHAR ucRow ; /* Number of Row,in power of 2; */
UCHAR ucColumn ; /* Number of Column,in power of 2; */
UCHAR ucBank ; /* Nunber of Bank; */
UCHAR ucRank ; /* Number of Rank, in power of 2 */
UCHAR ucChannelNum ; /* Number of channel; */
UCHAR ucChannelConfig ; /* [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */
UCHAR ucDefaultMVDDQ_ID ; /* Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */
UCHAR ucDefaultMVDDC_ID ; /* Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */
UCHAR ucRefreshRateFactor ;
UCHAR ucReserved [ 3 ] ;
} ATOM_VRAM_MODULE_V2 ;
typedef struct _ATOM_MEMORY_TIMING_FORMAT {
ULONG ulClkRange ; /* memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */
union {
USHORT usMRS ; /* mode register */
USHORT usDDR3_MR0 ;
} ;
union {
USHORT usEMRS ; /* extended mode register */
USHORT usDDR3_MR1 ;
} ;
UCHAR ucCL ; /* CAS latency */
UCHAR ucWL ; /* WRITE Latency */
UCHAR uctRAS ; /* tRAS */
UCHAR uctRC ; /* tRC */
UCHAR uctRFC ; /* tRFC */
UCHAR uctRCDR ; /* tRCDR */
UCHAR uctRCDW ; /* tRCDW */
UCHAR uctRP ; /* tRP */
UCHAR uctRRD ; /* tRRD */
UCHAR uctWR ; /* tWR */
UCHAR uctWTR ; /* tWTR */
UCHAR uctPDIX ; /* tPDIX */
UCHAR uctFAW ; /* tFAW */
UCHAR uctAOND ; /* tAOND */
union {
struct {
UCHAR ucflag ; /* flag to control memory timing calculation. bit0= control EMRS2 Infineon */
UCHAR ucReserved ;
} ;
USHORT usDDR3_MR2 ;
} ;
} ATOM_MEMORY_TIMING_FORMAT ;
typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1 {
ULONG ulClkRange ; /* memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */
USHORT usMRS ; /* mode register */
USHORT usEMRS ; /* extended mode register */
UCHAR ucCL ; /* CAS latency */
UCHAR ucWL ; /* WRITE Latency */
UCHAR uctRAS ; /* tRAS */
UCHAR uctRC ; /* tRC */
UCHAR uctRFC ; /* tRFC */
UCHAR uctRCDR ; /* tRCDR */
UCHAR uctRCDW ; /* tRCDW */
UCHAR uctRP ; /* tRP */
UCHAR uctRRD ; /* tRRD */
UCHAR uctWR ; /* tWR */
UCHAR uctWTR ; /* tWTR */
UCHAR uctPDIX ; /* tPDIX */
UCHAR uctFAW ; /* tFAW */
UCHAR uctAOND ; /* tAOND */
UCHAR ucflag ; /* flag to control memory timing calculation. bit0= control EMRS2 Infineon */
/* ///////////////////////GDDR parameters/////////////////////////////////// */
UCHAR uctCCDL ; /* */
UCHAR uctCRCRL ; /* */
UCHAR uctCRCWL ; /* */
UCHAR uctCKE ; /* */
UCHAR uctCKRSE ; /* */
UCHAR uctCKRSX ; /* */
UCHAR uctFAW32 ; /* */
UCHAR ucReserved1 ; /* */
UCHAR ucReserved2 ; /* */
UCHAR ucTerminator ;
} ATOM_MEMORY_TIMING_FORMAT_V1 ;
typedef struct _ATOM_MEMORY_FORMAT {
ULONG ulDllDisClock ; /* memory DLL will be disable when target memory clock is below this clock */
union {
USHORT usEMRS2Value ; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */
USHORT usDDR3_Reserved ; /* Not used for DDR3 memory */
} ;
union {
USHORT usEMRS3Value ; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */
USHORT usDDR3_MR3 ; /* Used for DDR3 memory */
} ;
UCHAR ucMemoryType ; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */
UCHAR ucMemoryVenderID ; /* Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */
UCHAR ucRow ; /* Number of Row,in power of 2; */
UCHAR ucColumn ; /* Number of Column,in power of 2; */
UCHAR ucBank ; /* Nunber of Bank; */
UCHAR ucRank ; /* Number of Rank, in power of 2 */
UCHAR ucBurstSize ; /* burst size, 0= burst size=4 1= burst size=8 */
UCHAR ucDllDisBit ; /* position of DLL Enable/Disable bit in EMRS ( Extended Mode Register ) */
UCHAR ucRefreshRateFactor ; /* memory refresh rate in unit of ms */
UCHAR ucDensity ; /* _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
UCHAR ucPreamble ; /* [7:4] Write Preamble, [3:0] Read Preamble */
UCHAR ucMemAttrib ; /* Memory Device Addribute, like RDBI/WDBI etc */
ATOM_MEMORY_TIMING_FORMAT asMemTiming [ 5 ] ; /* Memory Timing block sort from lower clock to higher clock */
} ATOM_MEMORY_FORMAT ;
typedef struct _ATOM_VRAM_MODULE_V3 {
ULONG ulChannelMapCfg ; /* board dependent paramenter:Channel combination */
USHORT usSize ; /* size of ATOM_VRAM_MODULE_V3 */
USHORT usDefaultMVDDQ ; /* board dependent parameter:Default Memory Core Voltage */
USHORT usDefaultMVDDC ; /* board dependent parameter:Default Memory IO Voltage */
UCHAR ucExtMemoryID ; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
UCHAR ucChannelNum ; /* board dependent parameter:Number of channel; */
UCHAR ucChannelSize ; /* board dependent parameter:32bit or 64bit */
UCHAR ucVREFI ; /* board dependnt parameter: EXT or INT +160mv to -140mv */
UCHAR ucNPL_RT ; /* board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
UCHAR ucFlag ; /* To enable/disable functionalities based on memory type */
ATOM_MEMORY_FORMAT asMemory ; /* describ all of video memory parameters from memory spec */
} ATOM_VRAM_MODULE_V3 ;
/* ATOM_VRAM_MODULE_V3.ucNPL_RT */
# define NPL_RT_MASK 0x0f
# define BATTERY_ODT_MASK 0xc0
# define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3
typedef struct _ATOM_VRAM_MODULE_V4 {
ULONG ulChannelMapCfg ; /* board dependent parameter: Channel combination */
USHORT usModuleSize ; /* size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */
USHORT usPrivateReserved ; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
/* MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */
USHORT usReserved ;
UCHAR ucExtMemoryID ; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
UCHAR ucMemoryType ; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */
UCHAR ucChannelNum ; /* Number of channels present in this module config */
UCHAR ucChannelWidth ; /* 0 - 32 bits; 1 - 64 bits */
UCHAR ucDensity ; /* _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
UCHAR ucFlag ; /* To enable/disable functionalities based on memory type */
UCHAR ucMisc ; /* bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 */
UCHAR ucVREFI ; /* board dependent parameter */
UCHAR ucNPL_RT ; /* board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
UCHAR ucPreamble ; /* [7:4] Write Preamble, [3:0] Read Preamble */
UCHAR ucMemorySize ; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
/* Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */
UCHAR ucReserved [ 3 ] ;
/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */
union {
USHORT usEMRS2Value ; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */
USHORT usDDR3_Reserved ;
} ;
union {
USHORT usEMRS3Value ; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */
USHORT usDDR3_MR3 ; /* Used for DDR3 memory */
} ;
UCHAR ucMemoryVenderID ; /* Predefined, If not predefined, vendor detection table gets executed */
UCHAR ucRefreshRateFactor ; /* [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */
UCHAR ucReserved2 [ 2 ] ;
ATOM_MEMORY_TIMING_FORMAT asMemTiming [ 5 ] ; /* Memory Timing block sort from lower clock to higher clock */
} ATOM_VRAM_MODULE_V4 ;
# define VRAM_MODULE_V4_MISC_RANK_MASK 0x3
# define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1
# define VRAM_MODULE_V4_MISC_BL_MASK 0x4
# define VRAM_MODULE_V4_MISC_BL8 0x4
# define VRAM_MODULE_V4_MISC_DUAL_CS 0x10
typedef struct _ATOM_VRAM_MODULE_V5 {
ULONG ulChannelMapCfg ; /* board dependent parameter: Channel combination */
USHORT usModuleSize ; /* size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */
USHORT usPrivateReserved ; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
/* MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */
USHORT usReserved ;
UCHAR ucExtMemoryID ; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
UCHAR ucMemoryType ; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */
UCHAR ucChannelNum ; /* Number of channels present in this module config */
UCHAR ucChannelWidth ; /* 0 - 32 bits; 1 - 64 bits */
UCHAR ucDensity ; /* _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
UCHAR ucFlag ; /* To enable/disable functionalities based on memory type */
UCHAR ucMisc ; /* bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 */
UCHAR ucVREFI ; /* board dependent parameter */
UCHAR ucNPL_RT ; /* board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
UCHAR ucPreamble ; /* [7:4] Write Preamble, [3:0] Read Preamble */
UCHAR ucMemorySize ; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
/* Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */
UCHAR ucReserved [ 3 ] ;
/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */
USHORT usEMRS2Value ; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */
USHORT usEMRS3Value ; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */
UCHAR ucMemoryVenderID ; /* Predefined, If not predefined, vendor detection table gets executed */
UCHAR ucRefreshRateFactor ; /* [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */
UCHAR ucFIFODepth ; /* FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth */
UCHAR ucCDR_Bandwidth ; /* [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth */
ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming [ 5 ] ; /* Memory Timing block sort from lower clock to higher clock */
} ATOM_VRAM_MODULE_V5 ;
typedef struct _ATOM_VRAM_INFO_V2 {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucNumOfVRAMModule ;
ATOM_VRAM_MODULE aVramInfo [ ATOM_MAX_NUMBER_OF_VRAM_MODULE ] ; /* just for allocation, real number of blocks is in ucNumOfVRAMModule; */
} ATOM_VRAM_INFO_V2 ;
typedef struct _ATOM_VRAM_INFO_V3 {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMemAdjustTblOffset ; /* offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */
USHORT usMemClkPatchTblOffset ; /* offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */
USHORT usRerseved ;
UCHAR aVID_PinsShift [ 9 ] ; /* 8 bit strap maximum+terminator */
UCHAR ucNumOfVRAMModule ;
ATOM_VRAM_MODULE aVramInfo [ ATOM_MAX_NUMBER_OF_VRAM_MODULE ] ; /* just for allocation, real number of blocks is in ucNumOfVRAMModule; */
ATOM_INIT_REG_BLOCK asMemPatch ; /* for allocation */
/* ATOM_INIT_REG_BLOCK aMemAdjust; */
} ATOM_VRAM_INFO_V3 ;
# define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3
typedef struct _ATOM_VRAM_INFO_V4 {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMemAdjustTblOffset ; /* offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */
USHORT usMemClkPatchTblOffset ; /* offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */
USHORT usRerseved ;
UCHAR ucMemDQ7_0ByteRemap ; /* DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 */
ULONG ulMemDQ7_0BitRemap ; /* each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] */
UCHAR ucReservde [ 4 ] ;
UCHAR ucNumOfVRAMModule ;
ATOM_VRAM_MODULE_V4 aVramInfo [ ATOM_MAX_NUMBER_OF_VRAM_MODULE ] ; /* just for allocation, real number of blocks is in ucNumOfVRAMModule; */
ATOM_INIT_REG_BLOCK asMemPatch ; /* for allocation */
/* ATOM_INIT_REG_BLOCK aMemAdjust; */
} ATOM_VRAM_INFO_V4 ;
typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR aVID_PinsShift [ 9 ] ; /* 8 bit strap maximum+terminator */
} ATOM_VRAM_GPIO_DETECTION_INFO ;
typedef struct _ATOM_MEMORY_TRAINING_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucTrainingLoop ;
UCHAR ucReserved [ 3 ] ;
ATOM_INIT_REG_BLOCK asMemTrainingSetting ;
} ATOM_MEMORY_TRAINING_INFO ;
typedef struct SW_I2C_CNTL_DATA_PARAMETERS {
UCHAR ucControl ;
UCHAR ucData ;
UCHAR ucSatus ;
UCHAR ucTemp ;
} SW_I2C_CNTL_DATA_PARAMETERS ;
# define SW_I2C_CNTL_DATA_PS_ALLOCATION SW_I2C_CNTL_DATA_PARAMETERS
typedef struct _SW_I2C_IO_DATA_PARAMETERS {
USHORT GPIO_Info ;
UCHAR ucAct ;
UCHAR ucData ;
} SW_I2C_IO_DATA_PARAMETERS ;
# define SW_I2C_IO_DATA_PS_ALLOCATION SW_I2C_IO_DATA_PARAMETERS
/****************************SW I2C CNTL DEFINITIONS**********************/
# define SW_I2C_IO_RESET 0
# define SW_I2C_IO_GET 1
# define SW_I2C_IO_DRIVE 2
# define SW_I2C_IO_SET 3
# define SW_I2C_IO_START 4
# define SW_I2C_IO_CLOCK 0
# define SW_I2C_IO_DATA 0x80
# define SW_I2C_IO_ZERO 0
# define SW_I2C_IO_ONE 0x100
# define SW_I2C_CNTL_READ 0
# define SW_I2C_CNTL_WRITE 1
# define SW_I2C_CNTL_START 2
# define SW_I2C_CNTL_STOP 3
# define SW_I2C_CNTL_OPEN 4
# define SW_I2C_CNTL_CLOSE 5
# define SW_I2C_CNTL_WRITE1BIT 6
/* ==============================VESA definition Portion=============================== */
# define VESA_OEM_PRODUCT_REV '01.00'
# define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB /* refer to VBE spec p.32, no TTY support */
# define VESA_MODE_WIN_ATTRIBUTE 7
# define VESA_WIN_SIZE 64
typedef struct _PTR_32_BIT_STRUCTURE {
USHORT Offset16 ;
USHORT Segment16 ;
} PTR_32_BIT_STRUCTURE ;
typedef union _PTR_32_BIT_UNION {
PTR_32_BIT_STRUCTURE SegmentOffset ;
ULONG Ptr32_Bit ;
} PTR_32_BIT_UNION ;
typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE {
UCHAR VbeSignature [ 4 ] ;
USHORT VbeVersion ;
PTR_32_BIT_UNION OemStringPtr ;
UCHAR Capabilities [ 4 ] ;
PTR_32_BIT_UNION VideoModePtr ;
USHORT TotalMemory ;
} VBE_1_2_INFO_BLOCK_UPDATABLE ;
typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE {
VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock ;
USHORT OemSoftRev ;
PTR_32_BIT_UNION OemVendorNamePtr ;
PTR_32_BIT_UNION OemProductNamePtr ;
PTR_32_BIT_UNION OemProductRevPtr ;
} VBE_2_0_INFO_BLOCK_UPDATABLE ;
typedef union _VBE_VERSION_UNION {
VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock ;
VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock ;
} VBE_VERSION_UNION ;
typedef struct _VBE_INFO_BLOCK {
VBE_VERSION_UNION UpdatableVBE_Info ;
UCHAR Reserved [ 222 ] ;
UCHAR OemData [ 256 ] ;
} VBE_INFO_BLOCK ;
typedef struct _VBE_FP_INFO {
USHORT HSize ;
USHORT VSize ;
USHORT FPType ;
UCHAR RedBPP ;
UCHAR GreenBPP ;
UCHAR BlueBPP ;
UCHAR ReservedBPP ;
ULONG RsvdOffScrnMemSize ;
ULONG RsvdOffScrnMEmPtr ;
UCHAR Reserved [ 14 ] ;
} VBE_FP_INFO ;
typedef struct _VESA_MODE_INFO_BLOCK {
/* Mandatory information for all VBE revisions */
USHORT ModeAttributes ; /* dw ? ; mode attributes */
UCHAR WinAAttributes ; /* db ? ; window A attributes */
UCHAR WinBAttributes ; /* db ? ; window B attributes */
USHORT WinGranularity ; /* dw ? ; window granularity */
USHORT WinSize ; /* dw ? ; window size */
USHORT WinASegment ; /* dw ? ; window A start segment */
USHORT WinBSegment ; /* dw ? ; window B start segment */
ULONG WinFuncPtr ; /* dd ? ; real mode pointer to window function */
USHORT BytesPerScanLine ; /* dw ? ; bytes per scan line */
/* ; Mandatory information for VBE 1.2 and above */
USHORT XResolution ; /* dw ? ; horizontal resolution in pixels or characters */
USHORT YResolution ; /* dw ? ; vertical resolution in pixels or characters */
UCHAR XCharSize ; /* db ? ; character cell width in pixels */
UCHAR YCharSize ; /* db ? ; character cell height in pixels */
UCHAR NumberOfPlanes ; /* db ? ; number of memory planes */
UCHAR BitsPerPixel ; /* db ? ; bits per pixel */
UCHAR NumberOfBanks ; /* db ? ; number of banks */
UCHAR MemoryModel ; /* db ? ; memory model type */
UCHAR BankSize ; /* db ? ; bank size in KB */
UCHAR NumberOfImagePages ; /* db ? ; number of images */
UCHAR ReservedForPageFunction ; /* db 1 ; reserved for page function */
/* ; Direct Color fields(required for direct/6 and YUV/7 memory models) */
UCHAR RedMaskSize ; /* db ? ; size of direct color red mask in bits */
UCHAR RedFieldPosition ; /* db ? ; bit position of lsb of red mask */
UCHAR GreenMaskSize ; /* db ? ; size of direct color green mask in bits */
UCHAR GreenFieldPosition ; /* db ? ; bit position of lsb of green mask */
UCHAR BlueMaskSize ; /* db ? ; size of direct color blue mask in bits */
UCHAR BlueFieldPosition ; /* db ? ; bit position of lsb of blue mask */
UCHAR RsvdMaskSize ; /* db ? ; size of direct color reserved mask in bits */
UCHAR RsvdFieldPosition ; /* db ? ; bit position of lsb of reserved mask */
UCHAR DirectColorModeInfo ; /* db ? ; direct color mode attributes */
/* ; Mandatory information for VBE 2.0 and above */
ULONG PhysBasePtr ; /* dd ? ; physical address for flat memory frame buffer */
ULONG Reserved_1 ; /* dd 0 ; reserved - always set to 0 */
USHORT Reserved_2 ; /* dw 0 ; reserved - always set to 0 */
/* ; Mandatory information for VBE 3.0 and above */
USHORT LinBytesPerScanLine ; /* dw ? ; bytes per scan line for linear modes */
UCHAR BnkNumberOfImagePages ; /* db ? ; number of images for banked modes */
UCHAR LinNumberOfImagPages ; /* db ? ; number of images for linear modes */
UCHAR LinRedMaskSize ; /* db ? ; size of direct color red mask(linear modes) */
UCHAR LinRedFieldPosition ; /* db ? ; bit position of lsb of red mask(linear modes) */
UCHAR LinGreenMaskSize ; /* db ? ; size of direct color green mask(linear modes) */
UCHAR LinGreenFieldPosition ; /* db ? ; bit position of lsb of green mask(linear modes) */
UCHAR LinBlueMaskSize ; /* db ? ; size of direct color blue mask(linear modes) */
UCHAR LinBlueFieldPosition ; /* db ? ; bit position of lsb of blue mask(linear modes) */
UCHAR LinRsvdMaskSize ; /* db ? ; size of direct color reserved mask(linear modes) */
UCHAR LinRsvdFieldPosition ; /* db ? ; bit position of lsb of reserved mask(linear modes) */
ULONG MaxPixelClock ; /* dd ? ; maximum pixel clock(in Hz) for graphics mode */
UCHAR Reserved ; /* db 190 dup (0) */
} VESA_MODE_INFO_BLOCK ;
/* BIOS function CALLS */
# define ATOM_BIOS_EXTENDED_FUNCTION_CODE 0xA0 /* ATI Extended Function code */
# define ATOM_BIOS_FUNCTION_COP_MODE 0x00
# define ATOM_BIOS_FUNCTION_SHORT_QUERY1 0x04
# define ATOM_BIOS_FUNCTION_SHORT_QUERY2 0x05
# define ATOM_BIOS_FUNCTION_SHORT_QUERY3 0x06
# define ATOM_BIOS_FUNCTION_GET_DDC 0x0B
# define ATOM_BIOS_FUNCTION_ASIC_DSTATE 0x0E
# define ATOM_BIOS_FUNCTION_DEBUG_PLAY 0x0F
# define ATOM_BIOS_FUNCTION_STV_STD 0x16
# define ATOM_BIOS_FUNCTION_DEVICE_DET 0x17
# define ATOM_BIOS_FUNCTION_DEVICE_SWITCH 0x18
# define ATOM_BIOS_FUNCTION_PANEL_CONTROL 0x82
# define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET 0x83
# define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH 0x84
# define ATOM_BIOS_FUNCTION_HW_ICON 0x8A
# define ATOM_BIOS_FUNCTION_SET_CMOS 0x8B
# define SUB_FUNCTION_UPDATE_DISPLAY_INFO 0x8000 /* Sub function 80 */
# define SUB_FUNCTION_UPDATE_EXPANSION_INFO 0x8100 /* Sub function 80 */
# define ATOM_BIOS_FUNCTION_DISPLAY_INFO 0x8D
# define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF 0x8E
# define ATOM_BIOS_FUNCTION_VIDEO_STATE 0x8F
# define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE 0x0300 /* Sub function 03 */
# define ATOM_SUB_FUNCTION_GET_LIDSTATE 0x0700 /* Sub function 7 */
# define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE 0x1400 /* Notify caller the current thermal state */
# define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300 /* Notify caller the current critical state */
# define ATOM_SUB_FUNCTION_SET_LIDSTATE 0x8500 /* Sub function 85 */
# define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900 /* Sub function 89 */
# define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT 0x9400 /* Notify caller that ADC is supported */
# define ATOM_BIOS_FUNCTION_VESA_DPMS 0x4F10 /* Set DPMS */
# define ATOM_SUB_FUNCTION_SET_DPMS 0x0001 /* BL: Sub function 01 */
# define ATOM_SUB_FUNCTION_GET_DPMS 0x0002 /* BL: Sub function 02 */
# define ATOM_PARAMETER_VESA_DPMS_ON 0x0000 /* BH Parameter for DPMS ON. */
# define ATOM_PARAMETER_VESA_DPMS_STANDBY 0x0100 /* BH Parameter for DPMS STANDBY */
# define ATOM_PARAMETER_VESA_DPMS_SUSPEND 0x0200 /* BH Parameter for DPMS SUSPEND */
# define ATOM_PARAMETER_VESA_DPMS_OFF 0x0400 /* BH Parameter for DPMS OFF */
# define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON 0x0800 /* BH Parameter for DPMS REDUCE ON (NOT SUPPORTED) */
# define ATOM_BIOS_RETURN_CODE_MASK 0x0000FF00L
# define ATOM_BIOS_REG_HIGH_MASK 0x0000FF00L
# define ATOM_BIOS_REG_LOW_MASK 0x000000FFL
/* structure used for VBIOS only */
/* DispOutInfoTable */
typedef struct _ASIC_TRANSMITTER_INFO {
USHORT usTransmitterObjId ;
USHORT usSupportDevice ;
UCHAR ucTransmitterCmdTblId ;
UCHAR ucConfig ;
UCHAR ucEncoderID ; /* available 1st encoder ( default ) */
UCHAR ucOptionEncoderID ; /* available 2nd encoder ( optional ) */
UCHAR uc2ndEncoderID ;
UCHAR ucReserved ;
} ASIC_TRANSMITTER_INFO ;
typedef struct _ASIC_ENCODER_INFO {
UCHAR ucEncoderID ;
UCHAR ucEncoderConfig ;
USHORT usEncoderCmdTblId ;
} ASIC_ENCODER_INFO ;
typedef struct _ATOM_DISP_OUT_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT ptrTransmitterInfo ;
USHORT ptrEncoderInfo ;
ASIC_TRANSMITTER_INFO asTransmitterInfo [ 1 ] ;
ASIC_ENCODER_INFO asEncoderInfo [ 1 ] ;
} ATOM_DISP_OUT_INFO ;
/* DispDevicePriorityInfo */
typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT asDevicePriority [ 16 ] ;
} ATOM_DISPLAY_DEVICE_PRIORITY_INFO ;
/* ProcessAuxChannelTransactionTable */
typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS {
USHORT lpAuxRequest ;
USHORT lpDataOut ;
UCHAR ucChannelID ;
union {
UCHAR ucReplyStatus ;
UCHAR ucDelay ;
} ;
UCHAR ucDataOutLen ;
UCHAR ucReserved ;
} PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS ;
# define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
/* GetSinkType */
typedef struct _DP_ENCODER_SERVICE_PARAMETERS {
USHORT ucLinkClock ;
union {
UCHAR ucConfig ; /* for DP training command */
UCHAR ucI2cId ; /* use for GET_SINK_TYPE command */
} ;
UCHAR ucAction ;
UCHAR ucStatus ;
UCHAR ucLaneNum ;
UCHAR ucReserved [ 2 ] ;
} DP_ENCODER_SERVICE_PARAMETERS ;
/* ucAction */
# define ATOM_DP_ACTION_GET_SINK_TYPE 0x01
# define ATOM_DP_ACTION_TRAINING_START 0x02
# define ATOM_DP_ACTION_TRAINING_COMPLETE 0x03
# define ATOM_DP_ACTION_TRAINING_PATTERN_SEL 0x04
# define ATOM_DP_ACTION_SET_VSWING_PREEMP 0x05
# define ATOM_DP_ACTION_GET_VSWING_PREEMP 0x06
# define ATOM_DP_ACTION_BLANKING 0x07
/* ucConfig */
# define ATOM_DP_CONFIG_ENCODER_SEL_MASK 0x03
# define ATOM_DP_CONFIG_DIG1_ENCODER 0x00
# define ATOM_DP_CONFIG_DIG2_ENCODER 0x01
# define ATOM_DP_CONFIG_EXTERNAL_ENCODER 0x02
# define ATOM_DP_CONFIG_LINK_SEL_MASK 0x04
# define ATOM_DP_CONFIG_LINK_A 0x00
# define ATOM_DP_CONFIG_LINK_B 0x04
# define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
/* DP_TRAINING_TABLE */
# define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR
# define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 )
# define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 16)
# define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 24)
# define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 32)
# define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 40)
# define DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 48)
# define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 60)
# define DP_I2C_AUX_DDC_WRITE_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 64)
# define DP_I2C_AUX_DDC_READ_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 72)
# define DP_I2C_AUX_DDC_READ_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 76)
# define DP_I2C_AUX_DDC_READ_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 80)
typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS {
UCHAR ucI2CSpeed ;
union {
UCHAR ucRegIndex ;
UCHAR ucStatus ;
} ;
USHORT lpI2CDataOut ;
UCHAR ucFlag ;
UCHAR ucTransBytes ;
UCHAR ucSlaveAddr ;
UCHAR ucLineNumber ;
} PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS ;
# define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
/* ucFlag */
# define HW_I2C_WRITE 1
# define HW_I2C_READ 0
/****************************************************************************/
/* Portion VI: Definitinos being oboselete */
/****************************************************************************/
/* ========================================================================================== */
/* Remove the definitions below when driver is ready! */
typedef struct _ATOM_DAC_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMaxFrequency ; /* in 10kHz unit */
USHORT usReserved ;
} ATOM_DAC_INFO ;
typedef struct _COMPASSIONATE_DATA {
ATOM_COMMON_TABLE_HEADER sHeader ;
/* ============================== DAC1 portion */
UCHAR ucDAC1_BG_Adjustment ;
UCHAR ucDAC1_DAC_Adjustment ;
USHORT usDAC1_FORCE_Data ;
/* ============================== DAC2 portion */
UCHAR ucDAC2_CRT2_BG_Adjustment ;
UCHAR ucDAC2_CRT2_DAC_Adjustment ;
USHORT usDAC2_CRT2_FORCE_Data ;
USHORT usDAC2_CRT2_MUX_RegisterIndex ;
UCHAR ucDAC2_CRT2_MUX_RegisterInfo ; /* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
UCHAR ucDAC2_NTSC_BG_Adjustment ;
UCHAR ucDAC2_NTSC_DAC_Adjustment ;
USHORT usDAC2_TV1_FORCE_Data ;
USHORT usDAC2_TV1_MUX_RegisterIndex ;
UCHAR ucDAC2_TV1_MUX_RegisterInfo ; /* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
UCHAR ucDAC2_CV_BG_Adjustment ;
UCHAR ucDAC2_CV_DAC_Adjustment ;
USHORT usDAC2_CV_FORCE_Data ;
USHORT usDAC2_CV_MUX_RegisterIndex ;
UCHAR ucDAC2_CV_MUX_RegisterInfo ; /* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
UCHAR ucDAC2_PAL_BG_Adjustment ;
UCHAR ucDAC2_PAL_DAC_Adjustment ;
USHORT usDAC2_TV2_FORCE_Data ;
} COMPASSIONATE_DATA ;
/****************************Supported Device Info Table Definitions**********************/
/* ucConnectInfo: */
/* [7:4] - connector type */
/* = 1 - VGA connector */
/* = 2 - DVI-I */
/* = 3 - DVI-D */
/* = 4 - DVI-A */
/* = 5 - SVIDEO */
/* = 6 - COMPOSITE */
/* = 7 - LVDS */
/* = 8 - DIGITAL LINK */
/* = 9 - SCART */
/* = 0xA - HDMI_type A */
/* = 0xB - HDMI_type B */
/* = 0xE - Special case1 (DVI+DIN) */
/* Others=TBD */
/* [3:0] - DAC Associated */
/* = 0 - no DAC */
/* = 1 - DACA */
/* = 2 - DACB */
/* = 3 - External DAC */
/* Others=TBD */
/* */
typedef struct _ATOM_CONNECTOR_INFO {
# if ATOM_BIG_ENDIAN
UCHAR bfConnectorType : 4 ;
UCHAR bfAssociatedDAC : 4 ;
# else
UCHAR bfAssociatedDAC : 4 ;
UCHAR bfConnectorType : 4 ;
# endif
} ATOM_CONNECTOR_INFO ;
typedef union _ATOM_CONNECTOR_INFO_ACCESS {
ATOM_CONNECTOR_INFO sbfAccess ;
UCHAR ucAccess ;
} ATOM_CONNECTOR_INFO_ACCESS ;
typedef struct _ATOM_CONNECTOR_INFO_I2C {
ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo ;
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ;
} ATOM_CONNECTOR_INFO_I2C ;
typedef struct _ATOM_SUPPORTED_DEVICES_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usDeviceSupport ;
ATOM_CONNECTOR_INFO_I2C asConnInfo [ ATOM_MAX_SUPPORTED_DEVICE_INFO ] ;
} ATOM_SUPPORTED_DEVICES_INFO ;
# define NO_INT_SRC_MAPPED 0xFF
typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP {
UCHAR ucIntSrcBitmap ;
} ATOM_CONNECTOR_INC_SRC_BITMAP ;
typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2 {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usDeviceSupport ;
ATOM_CONNECTOR_INFO_I2C asConnInfo [ ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ] ;
ATOM_CONNECTOR_INC_SRC_BITMAP
asIntSrcInfo [ ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ] ;
} ATOM_SUPPORTED_DEVICES_INFO_2 ;
typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usDeviceSupport ;
ATOM_CONNECTOR_INFO_I2C asConnInfo [ ATOM_MAX_SUPPORTED_DEVICE ] ;
ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo [ ATOM_MAX_SUPPORTED_DEVICE ] ;
} ATOM_SUPPORTED_DEVICES_INFO_2d1 ;
# define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1
typedef struct _ATOM_MISC_CONTROL_INFO {
USHORT usFrequency ;
UCHAR ucPLL_ChargePump ; /* PLL charge-pump gain control */
UCHAR ucPLL_DutyCycle ; /* PLL duty cycle control */
UCHAR ucPLL_VCO_Gain ; /* PLL VCO gain control */
UCHAR ucPLL_VoltageSwing ; /* PLL driver voltage swing control */
} ATOM_MISC_CONTROL_INFO ;
# define ATOM_MAX_MISC_INFO 4
typedef struct _ATOM_TMDS_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMaxFrequency ; /* in 10Khz */
ATOM_MISC_CONTROL_INFO asMiscInfo [ ATOM_MAX_MISC_INFO ] ;
} ATOM_TMDS_INFO ;
typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE {
UCHAR ucTVStandard ; /* Same as TV standards defined above, */
UCHAR ucPadding [ 1 ] ;
} ATOM_ENCODER_ANALOG_ATTRIBUTE ;
typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE {
UCHAR ucAttribute ; /* Same as other digital encoder attributes defined above */
UCHAR ucPadding [ 1 ] ;
} ATOM_ENCODER_DIGITAL_ATTRIBUTE ;
typedef union _ATOM_ENCODER_ATTRIBUTE {
ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib ;
ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib ;
} ATOM_ENCODER_ATTRIBUTE ;
typedef struct _DVO_ENCODER_CONTROL_PARAMETERS {
USHORT usPixelClock ;
USHORT usEncoderID ;
UCHAR ucDeviceType ; /* Use ATOM_DEVICE_xxx1_Index to indicate device type only. */
UCHAR ucAction ; /* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */
ATOM_ENCODER_ATTRIBUTE usDevAttr ;
} DVO_ENCODER_CONTROL_PARAMETERS ;
typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION {
DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ; /* Caller doesn't need to init this portion */
} DVO_ENCODER_CONTROL_PS_ALLOCATION ;
# define ATOM_XTMDS_ASIC_SI164_ID 1
# define ATOM_XTMDS_ASIC_SI178_ID 2
# define ATOM_XTMDS_ASIC_TFP513_ID 3
# define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
# define ATOM_XTMDS_SUPPORTED_DUALLINK 0x00000002
# define ATOM_XTMDS_MVPU_FPGA 0x00000004
typedef struct _ATOM_XTMDS_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usSingleLinkMaxFrequency ;
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ; /* Point the ID on which I2C is used to control external chip */
UCHAR ucXtransimitterID ;
UCHAR ucSupportedLink ; /* Bit field, bit0=1, single link supported;bit1=1,dual link supported */
UCHAR ucSequnceAlterID ; /* Even with the same external TMDS asic, it's possible that the program seqence alters */
/* due to design. This ID is used to alert driver that the sequence is not "standard"! */
UCHAR ucMasterAddress ; /* Address to control Master xTMDS Chip */
UCHAR ucSlaveAddress ; /* Address to control Slave xTMDS Chip */
} ATOM_XTMDS_INFO ;
typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS {
UCHAR ucEnable ; /* ATOM_ENABLE=On or ATOM_DISABLE=Off */
UCHAR ucDevice ; /* ATOM_DEVICE_DFP1_INDEX.... */
UCHAR ucPadding [ 2 ] ;
} DFP_DPMS_STATUS_CHANGE_PARAMETERS ;
/****************************Legacy Power Play Table Definitions **********************/
/* Definitions for ulPowerPlayMiscInfo */
# define ATOM_PM_MISCINFO_SPLIT_CLOCK 0x00000000L
# define ATOM_PM_MISCINFO_USING_MCLK_SRC 0x00000001L
# define ATOM_PM_MISCINFO_USING_SCLK_SRC 0x00000002L
# define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT 0x00000004L
# define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH 0x00000008L
# define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN 0x00000010L
# define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN 0x00000020L
# define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN 0x00000040L
# define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE 0x00000080L /* When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program */
# define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN 0x00000100L
# define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN 0x00000200L
# define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN 0x00000400L
# define ATOM_PM_MISCINFO_LOAD_BALANCE_EN 0x00000800L
# define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE 0x00001000L
# define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
# define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE 0x00004000L
# define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE 0x00008000L
# define ATOM_PM_MISCINFO_OVER_CLOCK_MODE 0x00010000L
# define ATOM_PM_MISCINFO_OVER_DRIVE_MODE 0x00020000L
# define ATOM_PM_MISCINFO_POWER_SAVING_MODE 0x00040000L
# define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE 0x00080000L
# define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK 0x00300000L /* 0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved */
# define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT 20
# define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE 0x00400000L
# define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2 0x00800000L
# define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4 0x01000000L
# define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN 0x02000000L /* When set, Dynamic */
# define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN 0x04000000L /* When set, Dynamic */
# define ATOM_PM_MISCINFO_3D_ACCELERATION_EN 0x08000000L /* When set, This mode is for acceleated 3D mode */
# define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK 0x70000000L /* 1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks) */
# define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT 28
# define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS 0x80000000L
# define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE 0x00000001L
# define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT 0x00000002L
# define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN 0x00000004L
# define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO 0x00000008L
# define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE 0x00000010L
# define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN 0x00000020L
# define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE 0x00000040L /* If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption. */
/* If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback */
# define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC 0x00000080L
# define ATOM_PM_MISCINFO2_STUTTER_MODE_EN 0x00000100L
# define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE 0x00000200L
/* ucTableFormatRevision=1 */
/* ucTableContentRevision=1 */
typedef struct _ATOM_POWERMODE_INFO {
ULONG ulMiscInfo ; /* The power level should be arranged in ascending order */
ULONG ulReserved1 ; /* must set to 0 */
ULONG ulReserved2 ; /* must set to 0 */
USHORT usEngineClock ;
USHORT usMemoryClock ;
UCHAR ucVoltageDropIndex ; /* index to GPIO table */
UCHAR ucSelectedPanel_RefreshRate ; /* panel refresh rate */
UCHAR ucMinTemperature ;
UCHAR ucMaxTemperature ;
UCHAR ucNumPciELanes ; /* number of PCIE lanes */
} ATOM_POWERMODE_INFO ;
/* ucTableFormatRevision=2 */
/* ucTableContentRevision=1 */
typedef struct _ATOM_POWERMODE_INFO_V2 {
ULONG ulMiscInfo ; /* The power level should be arranged in ascending order */
ULONG ulMiscInfo2 ;
ULONG ulEngineClock ;
ULONG ulMemoryClock ;
UCHAR ucVoltageDropIndex ; /* index to GPIO table */
UCHAR ucSelectedPanel_RefreshRate ; /* panel refresh rate */
UCHAR ucMinTemperature ;
UCHAR ucMaxTemperature ;
UCHAR ucNumPciELanes ; /* number of PCIE lanes */
} ATOM_POWERMODE_INFO_V2 ;
/* ucTableFormatRevision=2 */
/* ucTableContentRevision=2 */
typedef struct _ATOM_POWERMODE_INFO_V3 {
ULONG ulMiscInfo ; /* The power level should be arranged in ascending order */
ULONG ulMiscInfo2 ;
ULONG ulEngineClock ;
ULONG ulMemoryClock ;
UCHAR ucVoltageDropIndex ; /* index to Core (VDDC) votage table */
UCHAR ucSelectedPanel_RefreshRate ; /* panel refresh rate */
UCHAR ucMinTemperature ;
UCHAR ucMaxTemperature ;
UCHAR ucNumPciELanes ; /* number of PCIE lanes */
UCHAR ucVDDCI_VoltageDropIndex ; /* index to VDDCI votage table */
} ATOM_POWERMODE_INFO_V3 ;
# define ATOM_MAX_NUMBEROF_POWER_BLOCK 8
# define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN 0x01
# define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE 0x02
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63 0x01
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032 0x02
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030 0x03
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649 0x04
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64 0x05
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375 0x06
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512 0x07 /* Andigilog */
typedef struct _ATOM_POWERPLAY_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucOverdriveThermalController ;
UCHAR ucOverdriveI2cLine ;
UCHAR ucOverdriveIntBitmap ;
UCHAR ucOverdriveControllerAddress ;
UCHAR ucSizeOfPowerModeEntry ;
UCHAR ucNumOfPowerModeEntries ;
ATOM_POWERMODE_INFO asPowerPlayInfo [ ATOM_MAX_NUMBEROF_POWER_BLOCK ] ;
} ATOM_POWERPLAY_INFO ;
typedef struct _ATOM_POWERPLAY_INFO_V2 {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucOverdriveThermalController ;
UCHAR ucOverdriveI2cLine ;
UCHAR ucOverdriveIntBitmap ;
UCHAR ucOverdriveControllerAddress ;
UCHAR ucSizeOfPowerModeEntry ;
UCHAR ucNumOfPowerModeEntries ;
ATOM_POWERMODE_INFO_V2 asPowerPlayInfo [ ATOM_MAX_NUMBEROF_POWER_BLOCK ] ;
} ATOM_POWERPLAY_INFO_V2 ;
typedef struct _ATOM_POWERPLAY_INFO_V3 {
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucOverdriveThermalController ;
UCHAR ucOverdriveI2cLine ;
UCHAR ucOverdriveIntBitmap ;
UCHAR ucOverdriveControllerAddress ;
UCHAR ucSizeOfPowerModeEntry ;
UCHAR ucNumOfPowerModeEntries ;
ATOM_POWERMODE_INFO_V3 asPowerPlayInfo [ ATOM_MAX_NUMBEROF_POWER_BLOCK ] ;
} ATOM_POWERPLAY_INFO_V3 ;
/**************************************************************************/
/* Following definitions are for compatiblity issue in different SW components. */
# define ATOM_MASTER_DATA_TABLE_REVISION 0x01
# define Object_Info Object_Header
# define AdjustARB_SEQ MC_InitParameter
# define VRAM_GPIO_DetectionInfo VoltageObjectInfo
# define ASIC_VDDCI_Info ASIC_ProfilingInfo
# define ASIC_MVDDQ_Info MemoryTrainingInfo
# define SS_Info PPLL_SS_Info
# define ASIC_MVDDC_Info ASIC_InternalSS_Info
# define DispDevicePriorityInfo SaveRestoreInfo
# define DispOutInfo TV_VideoMode
# define ATOM_ENCODER_OBJECT_TABLE ATOM_OBJECT_TABLE
# define ATOM_CONNECTOR_OBJECT_TABLE ATOM_OBJECT_TABLE
/* New device naming, remove them when both DAL/VBIOS is ready */
# define DFP2I_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
# define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS
# define DFP1X_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
# define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS
# define DFP1I_OUTPUT_CONTROL_PARAMETERS DFP1_OUTPUT_CONTROL_PARAMETERS
# define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION
# define ATOM_DEVICE_DFP1I_SUPPORT ATOM_DEVICE_DFP1_SUPPORT
# define ATOM_DEVICE_DFP1X_SUPPORT ATOM_DEVICE_DFP2_SUPPORT
# define ATOM_DEVICE_DFP1I_INDEX ATOM_DEVICE_DFP1_INDEX
# define ATOM_DEVICE_DFP1X_INDEX ATOM_DEVICE_DFP2_INDEX
# define ATOM_DEVICE_DFP2I_INDEX 0x00000009
# define ATOM_DEVICE_DFP2I_SUPPORT (0x1L << ATOM_DEVICE_DFP2I_INDEX)
# define ATOM_S0_DFP1I ATOM_S0_DFP1
# define ATOM_S0_DFP1X ATOM_S0_DFP2
# define ATOM_S0_DFP2I 0x00200000L
# define ATOM_S0_DFP2Ib2 0x20
# define ATOM_S2_DFP1I_DPMS_STATE ATOM_S2_DFP1_DPMS_STATE
# define ATOM_S2_DFP1X_DPMS_STATE ATOM_S2_DFP2_DPMS_STATE
# define ATOM_S2_DFP2I_DPMS_STATE 0x02000000L
# define ATOM_S2_DFP2I_DPMS_STATEb3 0x02
# define ATOM_S3_DFP2I_ACTIVEb1 0x02
# define ATOM_S3_DFP1I_ACTIVE ATOM_S3_DFP1_ACTIVE
# define ATOM_S3_DFP1X_ACTIVE ATOM_S3_DFP2_ACTIVE
# define ATOM_S3_DFP2I_ACTIVE 0x00000200L
# define ATOM_S3_DFP1I_CRTC_ACTIVE ATOM_S3_DFP1_CRTC_ACTIVE
# define ATOM_S3_DFP1X_CRTC_ACTIVE ATOM_S3_DFP2_CRTC_ACTIVE
# define ATOM_S3_DFP2I_CRTC_ACTIVE 0x02000000L
# define ATOM_S3_DFP2I_CRTC_ACTIVEb3 0x02
# define ATOM_S5_DOS_REQ_DFP2Ib1 0x02
# define ATOM_S5_DOS_REQ_DFP2I 0x0200
# define ATOM_S6_ACC_REQ_DFP1I ATOM_S6_ACC_REQ_DFP1
# define ATOM_S6_ACC_REQ_DFP1X ATOM_S6_ACC_REQ_DFP2
# define ATOM_S6_ACC_REQ_DFP2Ib3 0x02
# define ATOM_S6_ACC_REQ_DFP2I 0x02000000L
# define TMDS1XEncoderControl DVOEncoderControl
# define DFP1XOutputControl DVOOutputControl
# define ExternalDFPOutputControl DFP1XOutputControl
# define EnableExternalTMDS_Encoder TMDS1XEncoderControl
# define DFP1IOutputControl TMDSAOutputControl
# define DFP2IOutputControl LVTMAOutputControl
# define DAC1_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
# define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
# define DAC2_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
# define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
# define ucDac1Standard ucDacStandard
# define ucDac2Standard ucDacStandard
# define TMDS1EncoderControl TMDSAEncoderControl
# define TMDS2EncoderControl LVTMAEncoderControl
# define DFP1OutputControl TMDSAOutputControl
# define DFP2OutputControl LVTMAOutputControl
# define CRT1OutputControl DAC1OutputControl
# define CRT2OutputControl DAC2OutputControl
/* These two lines will be removed for sure in a few days, will follow up with Michael V. */
# define EnableLVDS_SS EnableSpreadSpectrumOnPPLL
# define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL
/*********************************************************************************/
# pragma pack() /* BIOS data must use byte aligment */
# endif /* _ATOMBIOS_H */
