badpork/kolibrios
1
0
Fork 0
forked from KolibriOS/kolibrios
Code Pull Requests Activity

Updated R6040 driver for net branch:

Browse Source 
Fixed typo, cleaned up, disabled excessive debug output.

git-svn-id: svn://kolibrios.org@1893 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
hidnplayr 2011-02-28 19:20:47 +00:00
parent 37b6abf576
commit 4638ba887e
1 changed files with 83 additions and 104 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

187
kernel/branches/net/drivers/R6040.asm
View File

@ -24,11 +24,28 @@ format MS COFF
DEBUG equ 1
__DEBUG__ equ 1
__DEBUG_LEVEL__ equ 1
__DEBUG_LEVEL__ equ 2
TX_RING_SIZE equ 4
W_MAX_TIMEOUT equ 0x0FFF ; max time out delay time
TX_TIMEOUT equ 6000 ; Time before concluding the transmitter is hung, in ms
TX_RING_SIZE equ 4 ; RING sizes must be a power of 2
RX_RING_SIZE equ 4
RX_BUF_LEN_IDX equ 3 ; 0==8K, 1==16K, 2==32K, 3==64K
; Threshold is bytes transferred to chip before transmission starts.
TX_FIFO_THRESH equ 256 ; In bytes, rounded down to 32 byte units.
; The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024.
RX_FIFO_THRESH equ 4 ; Rx buffer level before first PCI xfer.
RX_DMA_BURST equ 4 ; Maximum PCI burst, '4' is 256 bytes
TX_DMA_BURST equ 4
include 'proc32.inc'
include 'imports.inc'
@ -39,43 +56,13 @@ public START
public service_proc
public version
; Operational parameters that usually are not changed.
; ethernet address length
ETH_ALEN equ 6
ETH_HLEN equ (2 * ETH_ALEN + 2)
ETH_ZLEN equ 60 ; 60 + 4bytes auto payload for mininmum 64bytes frame length
; system timer frequency
HZ equ 1000
; max time out delay time
W_MAX_TIMEOUT equ 0x0FFF
;; Size of the in-memory receive ring.
RX_BUF_LEN_IDX equ 3 ;; 0==8K, 1==16K, 2==32K, 3==64K
RX_BUF_LEN equ (8192 << RX_BUF_LEN_IDX)
;; PCI Tuning Parameters
; Threshold is bytes transferred to chip before transmission starts.
TX_FIFO_THRESH equ 256 ;; In bytes, rounded down to 32 byte units.
;; The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024.
RX_FIFO_THRESH equ 4 ;; Rx buffer level before first PCI xfer.
RX_DMA_BURST equ 4 ;; Maximum PCI burst, '4' is 256 bytes
TX_DMA_BURST equ 4
;; Operational parameters that usually are not changed.
PHY1_ADDR equ 1 ;For MAC1
PHY2_ADDR equ 3 ;For MAC2
PHY_MODE equ 0x3100 ;PHY CHIP Register 0
PHY_CAP equ 0x01E1 ;PHY CHIP Register 4
;; Time in jiffies before concluding the transmitter is hung.
TX_TIMEOUT equ ((6000*HZ)/1000)
IO_SIZE equ 256 ; RDC MAC I/O Size
MAX_MAC equ 2 ; MAX RDC MAC
;**************************************************************************
; RDC R6040 Register Definitions
;**************************************************************************
@ -139,9 +126,7 @@ PHY_CC equ 0x88 ;PHY status change configuration register
PHY_ST equ 0x8A ;PHY status register
MAC_SM equ 0xAC ;MAC status machine
MAC_ID equ 0xBE ;Identifier register
;?[
;TX_DCNT equ 0x80 ;TX descriptor count
;RX_DCNT equ 0x80 ;RX descriptor count
MAX_BUF_SIZE equ 0x600 ;1536
MBCR_DEFAULT equ 0x012A ;MAC Bus Control Register
@ -169,6 +154,11 @@ RX_INTS equ RX_FIFO_FULL or RX_NO_DESC or RX_FINISH
TX_INTS equ TX_FINISH
INT_MASK equ RX_INTS or TX_INTS
RX_BUF_LEN equ (8192 << RX_BUF_LEN_IDX) ; Size of the in-memory receive ring.
IO_SIZE equ 256 ; RDC MAC I/O Size
MAX_MAC equ 2 ; MAX RDC MAC
virtual at 0
x_head:
@ -333,7 +323,7 @@ proc service_proc stdcall, ioctl:dword
find_irq [device.pci_bus], [device.pci_dev], [device.irq_line]
DEBUGF 2,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\
DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\
[device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:4
; Ok, the eth_device structure is ready, let's probe the device
@ -359,11 +349,11 @@ proc service_proc stdcall, ioctl:dword
; If the device was already loaded, find the device number and return it in eax
.find_devicenum:
DEBUGF 2,"Trying to find device number of already registered device\n"
DEBUGF 1,"Trying to find device number of already registered device\n"
call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx
; into a device number in edi
mov eax, edi ; Application wants it in eax instead
DEBUGF 2,"Kernel says: %u\n", eax
DEBUGF 1,"Kernel says: %u\n", eax
ret
; If an error occured, remove all allocated data and exit (returning -1 in eax)
@ -392,12 +382,12 @@ endp
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
macro r6040_mdio_write reg, val {
stdcall r6040_phy_read, [io_addr], [r6040_private.phy_addr], reg
macro mdio_write reg, val {
stdcall phy_read, [device.io_addr], [device.phy_addr], reg
}
macro r6040_mdio_write reg, val {
stdcall r6040_phy_write, [io_addr], [r6040_private.phy_addr], reg, val
macro mdio_write reg, val {
stdcall phy_write, [device.io_addr], [devce.phy_addr], reg, val
}
@ -447,15 +437,9 @@ probe:
or eax, dword [device.mac]
test eax, eax
jnz @f
DEBUGF 1, "MAC address not initialized\n" ;, generating random"
DEBUGF 2, "ERROR: MAC address not initialized!\n"
;Asper: Add here generate function call!
; Temporary workaround: init by constant adress
mov dword [device.mac], 0x00006000
mov word [device.mac+4], 0x0001
@@:
; Init RDC private data
mov [device.mcr0], 0x1002
;mov [private.phy_addr], 1 ; Asper: Only one network card is supported now.
@ -465,7 +449,7 @@ probe:
stdcall phy_read, 1, 2
cmp ax, 0xFFFF
jne @f
DEBUGF 1, "Failed to detect an attached PHY\n" ;, generating random"
DEBUGF 2, "Failed to detect an attached PHY\n" ;, generating random"
mov eax, -1
ret
@@:
@ -492,15 +476,16 @@ probe:
stdcall phy_write, eax, 4, PHY_CAP
stdcall phy_write, eax, 0, PHY_MODE
; if PHY_MODE = 0x3100
if PHY_MODE = 0x3100
call phy_mode_chk
mov [device.phy_mode], ax
jmp .phy_readen
; end if
end if
; if not (PHY_MODE and 0x0100)
if not (PHY_MODE and 0x0100)
mov [device.phy_mode], 0
; end if
end if
.phy_readen:
; Set duplex mode
@ -527,7 +512,7 @@ probe:
align 4
reset:
DEBUGF 1,"Resetting R6040\n"
DEBUGF 2,"Resetting R6040\n"
; Mask off Interrupt
xor ax, ax
@ -539,11 +524,11 @@ reset:
; attach int handler
movzx eax, [device.irq_line]
DEBUGF 1,"Attaching int handler to irq %x\n", eax:1
DEBUGF 2,"Attaching int handler to irq %x\n", eax:1
stdcall AttachIntHandler, eax, int_handler, dword 0
test eax, eax
jnz @f
DEBUGF 1,"\nCould not attach int handler!\n"
DEBUGF 2,"\nCould not attach int handler!\n"
; or eax, -1
; ret
@@:
@ -651,7 +636,7 @@ init_txbufs:
.next_desc:
mov [esi + x_head.ndesc], eax
mov [edi + x_head.skb_ptr], 0
mov [esi + x_head.skb_ptr], 0
mov [esi + x_head.status], DSC_OWNER_MAC
add eax, x_head.sizeof
@ -664,8 +649,6 @@ init_txbufs:
GetRealAddr
mov [device.tx_ring + x_head.sizeof*(TX_RING_SIZE - 1) + x_head.ndesc], eax
DEBUGF 1,"ok\n"
ret
@ -682,17 +665,14 @@ init_rxbufs:
mov ecx, RX_RING_SIZE
.next_desc:
DEBUGF 1,"esi=0x%x, edx=0x%x, ", esi, edx
mov [esi + x_head.ndesc], edx
mov [esi + x_head.ndesc], edx
push esi ecx
stdcall KernelAlloc, dword 2000
stdcall KernelAlloc, MAX_BUF_SIZE
pop ecx esi
DEBUGF 1,"eax=0x%x, ", eax
mov [esi + x_head.skb_ptr], eax
GetRealAddr
DEBUGF 1,"eax=0x%x\n", eax
mov [esi + x_head.buf], eax
mov [esi + x_head.status], DSC_OWNER_MAC
@ -708,8 +688,6 @@ init_rxbufs:
GetRealAddr
mov [device.rx_ring + x_head.sizeof*(RX_RING_SIZE - 1) + x_head.ndesc], eax
DEBUGF 1,"ok\n"
ret
@ -725,10 +703,6 @@ phy_mode_chk:
test eax, 0x4
jz .ret_0x8000
; jnz @f
; mov eax, 0x8000 ; Link Failed, full duplex
; @@:
; PHY Chip Auto-Negotiation Status
movzx eax, [device.phy_addr]
stdcall phy_read, eax, 1
@ -774,9 +748,9 @@ phy_mode_chk:
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
transmit:
DEBUGF 1,"\nTransmitting packet, buffer:%x, size:%u\n", [esp+4], [esp+8]
DEBUGF 2,"\nTransmitting packet, buffer:%x, size:%u\n", [esp+4], [esp+8]
mov eax, [esp+4]
DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
DEBUGF 2,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
[eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\
[eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\
[eax+13]:2,[eax+12]:2
@ -791,20 +765,22 @@ transmit:
add edi, ebx
add edi, device.tx_ring - ebx
DEBUGF 1,"R6040: TX buffer status: 0x%x\n", [edi + x_head.status]:4
DEBUGF 2,"TX buffer status: 0x%x\n", [edi + x_head.status]:4
test [edi + x_head.status], 0x8000 ; check if buffer is available
test [edi + x_head.status], DSC_OWNER_MAC ; check if buffer is available
jnz .wait_to_send
.do_send:
DEBUGF 2,"Sending now\n"
mov eax, [esp+4]
mov [edi + x_head.skb_ptr], eax
GetRealAddr
mov [edi + x_head.buf], eax
mov ecx, [esp+8]
mov [edi + x_head.len], cx
mov [edi + x_head.status], 0x8000
mov [edi + x_head.status], DSC_OWNER_MAC
; Trigger the MAC to check the TX descriptor
mov ax, 0x01
@ -813,27 +789,31 @@ transmit:
out dx, ax
inc [device.cur_tx]
and [device.cur_tx], TX_RING_SIZE-1
and [device.cur_tx], TX_RING_SIZE - 1
xor eax, eax
ret 8
.wait_to_send:
; mov ecx, [timer_ticks]
; add ecx, 100
; .l2:
; test [eax + x_head.status], 0x8000
; jz .do_send
; mov esi, 10
; call Sleep
; cmp ecx, [timer_ticks]
; jl .l2
DEBUGF 2,"Waiting for TX buffer\n"
call GetTimerTicks ; returns in eax
lea edx, [eax + 100]
.l2:
test [edi + x_head.status], DSC_OWNER_MAC
jz .do_send
mov esi, 10
call Sleep
call GetTimerTicks
cmp edx, eax
jl .l2
DEBUGF 1,"Send timeout\n"
xor eax, eax
dec eax
.fail:
DEBUGF 1,"Send timeout\n"
DEBUGF 1,"Send failed\n"
ret 8
@ -848,7 +828,7 @@ transmit:
align 4
int_handler:
DEBUGF 1,"\nIRQ %x ", eax:2 ; no, you cant replace 'eax:2' with 'al', this must be a bug in FDO
DEBUGF 2,"\nIRQ %x ", eax:2 ; no, you cant replace 'eax:2' with 'al', this must be a bug in FDO
; Find pointer of device wich made IRQ occur
@ -866,7 +846,7 @@ int_handler:
in ax, dx
out dx, ax ; send it back to ACK
DEBUGF 1,"MISR=%x\n", eax:4
DEBUGF 2,"MISR=%x\n", eax:4
; Check if we are interessed in some of the reasons
@ -906,7 +886,7 @@ int_handler:
test cx, DSC_OWNER_MAC
jnz .no_RX
DEBUGF 1,"packet status=0x%x\n", cx
DEBUGF 2,"packet status=0x%x\n", cx
test cx, DSC_RX_ERR ; Global error status set
jnz .no_RX
@ -925,12 +905,12 @@ int_handler:
push ecx
push [edx + x_head.skb_ptr]
DEBUGF 1,"packet ptr=0x%x\n", [edx + x_head.skb_ptr]
DEBUGF 2,"packet ptr=0x%x\n", [edx + x_head.skb_ptr]
; reset the RX descriptor
push edx
stdcall KernelAlloc, 2000
stdcall KernelAlloc, MAX_BUF_SIZE
pop edx
mov [edx + x_head.skb_ptr], eax
GetRealAddr
@ -958,22 +938,21 @@ int_handler:
lea edi, [device.tx_ring + edi]
test [edi + x_head.status], DSC_OWNER_MAC
jnz .tx_loop_end
jnz .no_TX
cmp [edi + x_head.skb_ptr], 0
je .tx_loop_end
je .no_TX
DEBUGF 1,"Freeing buffer 0x%x\n", [edi + x_head.skb_ptr]
DEBUGF 2,"Freeing buffer 0x%x\n", [edi + x_head.skb_ptr]
push [edi + x_head.skb_ptr]
call KernelFree
mov [edi + x_head.skb_ptr], 0
call KernelFree
inc [device.last_tx]
and [device.last_tx], TX_RING_SIZE - 1
jmp .loop_tx
.tx_loop_end:
jmp .loop_tx
.no_TX:
pop ax
@ -985,7 +964,7 @@ int_handler:
align 4
init_mac_regs:
DEBUGF 1,"initializing MAC regs\n"
DEBUGF 2,"initializing MAC regs\n"
; MAC operation register
mov ax, 1
@ -1014,7 +993,7 @@ init_mac_regs:
align 4
proc phy_read stdcall, phy_addr:dword, reg:dword
DEBUGF 1,"PHY read, addr=0x%x reg=0x%x\n", [phy_addr]:8, [reg]:8
DEBUGF 2,"PHY read, addr=0x%x reg=0x%x\n", [phy_addr]:8, [reg]:8
mov eax, [phy_addr]
shl eax, 8
@ -1038,7 +1017,7 @@ proc phy_read stdcall, phy_addr:dword, reg:dword
in ax, dx
and eax, 0xFFFF
DEBUGF 1,"PHY read, val=0x%x\n", eax:4
DEBUGF 2,"PHY read, val=0x%x\n", eax:4
ret
@ -1052,7 +1031,7 @@ endp
align 4
proc phy_write stdcall, phy_addr:dword, reg:dword, val:dword
DEBUGF 1,"PHY write, addr=0x%x reg=0x%x val=0x%x\n", [phy_addr]:8, [reg]:8, [val]:8
DEBUGF 2,"PHY write, addr=0x%x reg=0x%x val=0x%x\n", [phy_addr]:8, [reg]:8, [val]:8
mov eax, [val]
set_io 0
@ -1078,7 +1057,7 @@ proc phy_write stdcall, phy_addr:dword, reg:dword, val:dword
jnz .write
@@:
DEBUGF 1,"PHY write ok\n"
DEBUGF 2,"PHY write ok\n"
ret
endp