badpork/kolibrios
1
0
Fork 0
forked from KolibriOS/kolibrios
Code Pull Requests Activity

Bugfix in R6040 driver RX descriptors, cleanup.

Browse Source 
git-svn-id: svn://kolibrios.org@4439 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
hidnplayr 2014-01-10 20:33:38 +00:00
parent 4ebbeeff95
commit c184a722c5
1 changed files with 168 additions and 129 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

297
drivers/ethernet/R6040.asm
View File

@ -1,6 +1,6 @@
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2013. All rights reserved. ;;
;; Copyright (C) KolibriOS team 2004-2014. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; R6040 driver for KolibriOS ;;
@ -58,94 +58,106 @@ public version
; Operational parameters that usually are not changed.
PHY1_ADDR = 1 ;For MAC1
PHY2_ADDR = 3 ;For MAC2
PHY_MODE = 0x3100 ;PHY CHIP Register 0
PHY_CAP = 0x01E1 ;PHY CHIP Register 4
PHY1_ADDR = 1 ; For MAC1
PHY2_ADDR = 3 ; For MAC2
PHY_MODE = 0x3100 ; PHY CHIP Register 0
PHY_CAP = 0x01E1 ; PHY CHIP Register 4
;**************************************************************************
; RDC R6040 Register Definitions
;**************************************************************************
MCR0 = 0x00 ;Control register 0
MCR1 = 0x01 ;Control register 1
MAC_RST = 0x0001 ;Reset the MAC
MBCR = 0x08 ;Bus control
MT_ICR = 0x0C ;TX interrupt control
MR_ICR = 0x10 ;RX interrupt control
MTPR = 0x14 ;TX poll command register
MR_BSR = 0x18 ;RX buffer size
MR_DCR = 0x1A ;RX descriptor control
MLSR = 0x1C ;Last status
MMDIO = 0x20 ;MDIO control register
MDIO_WRITE = 0x4000 ;MDIO write
MDIO_READ = 0x2000 ;MDIO read
MMRD = 0x24 ;MDIO read data register
MMWD = 0x28 ;MDIO write data register
MTD_SA0 = 0x2C ;TX descriptor start address 0
MTD_SA1 = 0x30 ;TX descriptor start address 1
MRD_SA0 = 0x34 ;RX descriptor start address 0
MRD_SA1 = 0x38 ;RX descriptor start address 1
MISR = 0x3C ;Status register
MIER = 0x40 ;INT enable register
MSK_INT = 0x0000 ;Mask off interrupts
RX_FINISH = 0x0001 ;RX finished
RX_NO_DESC = 0x0002 ;No RX descriptor available
RX_FIFO_FULL = 0x0004 ;RX FIFO full
RX_EARLY = 0x0008 ;RX early
TX_FINISH = 0x0010 ;TX finished
TX_EARLY = 0x0080 ;TX early
EVENT_OVRFL = 0x0100 ;Event counter overflow
LINK_CHANGED = 0x0200 ;PHY link changed
ME_CISR = 0x44 ;Event counter INT status
ME_CIER = 0x48 ;Event counter INT enable
MR_CNT = 0x50 ;Successfully received packet counter
ME_CNT0 = 0x52 ;Event counter 0
ME_CNT1 = 0x54 ;Event counter 1
ME_CNT2 = 0x56 ;Event counter 2
ME_CNT3 = 0x58 ;Event counter 3
MT_CNT = 0x5A ;Successfully transmit packet counter
ME_CNT4 = 0x5C ;Event counter 4
MP_CNT = 0x5E ;Pause frame counter register
MAR0 = 0x60 ;Hash table 0
MAR1 = 0x62 ;Hash table 1
MAR2 = 0x64 ;Hash table 2
MAR3 = 0x66 ;Hash table 3
MID_0L = 0x68 ;Multicast address MID0 Low
MID_0M = 0x6A ;Multicast address MID0 Medium
MID_0H = 0x6C ;Multicast address MID0 High
MID_1L = 0x70 ;MID1 Low
MID_1M = 0x72 ;MID1 Medium
MID_1H = 0x74 ;MID1 High
MID_2L = 0x78 ;MID2 Low
MID_2M = 0x7A ;MID2 Medium
MID_2H = 0x7C ;MID2 High
MID_3L = 0x80 ;MID3 Low
MID_3M = 0x82 ;MID3 Medium
MID_3H = 0x84 ;MID3 High
PHY_CC = 0x88 ;PHY status change configuration register
PHY_ST = 0x8A ;PHY status register
MAC_SM = 0xAC ;MAC status machine
MAC_ID = 0xBE ;Identifier register
MAX_BUF_SIZE = 0x600 ;1536
MCR0 = 0x00 ; Control register 0
MCR0_RCVEN = 0x0002 ; Receive enable
MCR0_PROMISC = 0x0020 ; Promiscuous mode
MCR0_HASH_EN = 0x0100 ; Enable multicast hash table function
MCR0_XMTEN = 0x1000 ; Transmission enable
MCR0_FD = 0x8000 ; Full/Half Duplex mode
MBCR_DEFAULT = 0x012A ;MAC Bus Control Register
MCAST_MAX = 3 ;Max number multicast addresses to filter
MCR1 = 0x01 ; Control register 1
MAC_RST = 0x0001 ; Reset the MAC
MBCR = 0x08 ; Bus control
MT_ICR = 0x0C ; TX interrupt control
MR_ICR = 0x10 ; RX interrupt control
MTPR = 0x14 ; TX poll command register
MR_BSR = 0x18 ; RX buffer size
MR_DCR = 0x1A ; RX descriptor control
MLSR = 0x1C ; Last status
MMDIO = 0x20 ; MDIO control register
MDIO_WRITE = 0x4000 ; MDIO write
MDIO_READ = 0x2000 ; MDIO read
MMRD = 0x24 ; MDIO read data register
MMWD = 0x28 ; MDIO write data register
MTD_SA0 = 0x2C ; TX descriptor start address 0
MTD_SA1 = 0x30 ; TX descriptor start address 1
MRD_SA0 = 0x34 ; RX descriptor start address 0
MRD_SA1 = 0x38 ; RX descriptor start address 1
MISR = 0x3C ; Status register
MIER = 0x40 ; INT enable register
MSK_INT = 0x0000 ; Mask off interrupts
RX_FINISH = 0x0001 ; RX finished
RX_NO_DESC = 0x0002 ; No RX descriptor available
RX_FIFO_FULL = 0x0004 ; RX FIFO full
RX_EARLY = 0x0008 ; RX early
TX_FINISH = 0x0010 ; TX finished
TX_EARLY = 0x0080 ; TX early
EVENT_OVRFL = 0x0100 ; Event counter overflow
LINK_CHANGED = 0x0200 ; PHY link changed
ME_CISR = 0x44 ; Event counter INT status
ME_CIER = 0x48 ; Event counter INT enable
MR_CNT = 0x50 ; Successfully received packet counter
ME_CNT0 = 0x52 ; Event counter 0
ME_CNT1 = 0x54 ; Event counter 1
ME_CNT2 = 0x56 ; Event counter 2
ME_CNT3 = 0x58 ; Event counter 3
MT_CNT = 0x5A ; Successfully transmit packet counter
ME_CNT4 = 0x5C ; Event counter 4
MP_CNT = 0x5E ; Pause frame counter register
MAR0 = 0x60 ; Hash table 0
MAR1 = 0x62 ; Hash table 1
MAR2 = 0x64 ; Hash table 2
MAR3 = 0x66 ; Hash table 3
MID_0L = 0x68 ; Multicast address MID0 Low
MID_0M = 0x6A ; Multicast address MID0 Medium
MID_0H = 0x6C ; Multicast address MID0 High
MID_1L = 0x70 ; MID1 Low
MID_1M = 0x72 ; MID1 Medium
MID_1H = 0x74 ; MID1 High
MID_2L = 0x78 ; MID2 Low
MID_2M = 0x7A ; MID2 Medium
MID_2H = 0x7C ; MID2 High
MID_3L = 0x80 ; MID3 Low
MID_3M = 0x82 ; MID3 Medium
MID_3H = 0x84 ; MID3 High
PHY_CC = 0x88 ; PHY status change configuration register
PHY_ST = 0x8A ; PHY status register
MAC_SM = 0xAC ; MAC status machine
MAC_ID = 0xBE ; Identifier register
MAX_BUF_SIZE = 0x600 ; 1536
MBCR_DEFAULT = 0x012A ; MAC Bus Control Register
MCAST_MAX = 3 ; Max number multicast addresses to filter
;Descriptor status
DSC_OWNER_MAC = 0x8000 ;MAC is the owner of this descriptor
DSC_RX_OK = 0x4000 ;RX was successfull
DSC_RX_ERR = 0x0800 ;RX PHY error
DSC_RX_ERR_DRI = 0x0400 ;RX dribble packet
DSC_RX_ERR_BUF = 0x0200 ;RX length exceeds buffer size
DSC_RX_ERR_LONG = 0x0100 ;RX length > maximum packet length
DSC_RX_ERR_RUNT = 0x0080 ;RX packet length < 64 byte
DSC_RX_ERR_CRC = 0x0040 ;RX CRC error
DSC_RX_BCAST = 0x0020 ;RX broadcast (no error)
DSC_RX_MCAST = 0x0010 ;RX multicast (no error)
DSC_RX_MCH_HIT = 0x0008 ;RX multicast hit in hash table (no error)
DSC_RX_MIDH_HIT = 0x0004 ;RX MID table hit (no error)
DSC_RX_IDX_MID_MASK = 3 ;RX mask for the index of matched MIDx
DSC_OWNER_MAC = 0x8000 ; MAC is the owner of this descriptor
DSC_RX_OK = 0x4000 ; RX was successfull
DSC_RX_ERR = 0x0800 ; RX PHY error
DSC_RX_ERR_DRI = 0x0400 ; RX dribble packet
DSC_RX_ERR_BUF = 0x0200 ; RX length exceeds buffer size
DSC_RX_ERR_LONG = 0x0100 ; RX length > maximum packet length
DSC_RX_ERR_RUNT = 0x0080 ; RX packet length < 64 byte
DSC_RX_ERR_CRC = 0x0040 ; RX CRC error
DSC_RX_BCAST = 0x0020 ; RX broadcast (no error)
DSC_RX_MCAST = 0x0010 ; RX multicast (no error)
DSC_RX_MCH_HIT = 0x0008 ; RX multicast hit in hash table (no error)
DSC_RX_MIDH_HIT = 0x0004 ; RX MID table hit (no error)
DSC_RX_IDX_MID_MASK = 3 ; RX mask for the index of matched MIDx
;PHY settings
ICPLUS_PHY_ID = 0x0243
@ -224,7 +236,7 @@ proc START stdcall, state:dword
.entry:
DEBUGF 2,"Loading %s driver\n", my_service
DEBUGF 2,"Loading driver\n"
stdcall RegService, my_service, service_proc
ret
@ -415,7 +427,7 @@ ret
align 4
probe:
DEBUGF 2,"Probing R6040 device\n"
DEBUGF 1,"Probing R6040 device\n"
PCI_make_bus_master
@ -438,11 +450,11 @@ probe:
or eax, dword [device.mac]
test eax, eax
jnz @f
DEBUGF 2, "ERROR: MAC address not initialized!\n"
DEBUGF 2, "MAC address not initialized!\n"
@@:
; Init RDC private data
mov [device.mcr0], 0x1002
mov [device.mcr0], MCR0_XMTEN or MCR0_RCVEN
;mov [private.phy_addr], 1 ; Asper: Only one network card is supported now.
mov [device.switch_sig], 0
@ -463,7 +475,7 @@ probe:
call init_rxbufs
; Read the PHY ID
mov [device.phy_mode], 0x8000
mov [device.phy_mode], MCR0_FD
stdcall phy_read, 0, 2
mov [device.switch_sig], ax
cmp ax, ICPLUS_PHY_ID
@ -513,7 +525,7 @@ probe:
align 4
reset:
DEBUGF 2,"Resetting R6040\n"
DEBUGF 1,"Resetting R6040\n"
; Mask off Interrupt
xor ax, ax
@ -525,11 +537,11 @@ reset:
; attach int handler
movzx eax, [device.irq_line]
DEBUGF 2,"Attaching int handler to irq %x\n", eax:1
DEBUGF 1,"Attaching int handler to irq %x\n", eax:1
stdcall AttachIntHandler, eax, int_handler, dword 0
test eax, eax
jnz @f
DEBUGF 2,"\nCould not attach int handler!\n"
DEBUGF 2,"Could not attach int handler!\n"
; or eax, -1
; ret
@@:
@ -600,9 +612,9 @@ reset:
set_io MIER
out dx, ax
;Enable TX and RX
;Enable RX
mov ax, [device.mcr0]
or ax, 0x0002
or ax, MCR0_RCVEN
set_io 0
out dx, ax
@ -668,11 +680,11 @@ init_rxbufs:
mov ecx, RX_RING_SIZE
.next_desc:
mov [esi + x_head.ndesc], edx
mov [esi + x_head.ndesc], edx
push esi ecx
push esi ecx edx
stdcall KernelAlloc, MAX_BUF_SIZE
pop ecx esi
pop edx ecx esi
mov [esi + x_head.skb_ptr], eax
GetRealAddr
@ -685,8 +697,7 @@ init_rxbufs:
dec ecx
jnz .next_desc
; complete the ring by linking the last to the first
; complete the ring by linking the last to the first
lea eax, [device.rx_ring]
GetRealAddr
mov [device.rx_ring + x_head.sizeof*(RX_RING_SIZE - 1) + x_head.ndesc], eax
@ -751,9 +762,9 @@ phy_mode_chk:
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
transmit:
DEBUGF 2,"\nTransmitting packet, buffer:%x, size:%u\n", [esp+4], [esp+8]
DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [esp+4], [esp+8]
mov eax, [esp+4]
DEBUGF 2,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
[eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\
[eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\
[eax+13]:2,[eax+12]:2
@ -768,14 +779,13 @@ transmit:
add edi, ebx
add edi, device.tx_ring - ebx
DEBUGF 2,"TX buffer status: 0x%x\n", [edi + x_head.status]:4
DEBUGF 1,"TX buffer status: 0x%x\n", [edi + x_head.status]:4
test [edi + x_head.status], DSC_OWNER_MAC ; check if buffer is available
jnz .wait_to_send
.do_send:
DEBUGF 2,"Sending now\n"
DEBUGF 1,"Sending now\n"
mov eax, [esp+4]
mov [edi + x_head.skb_ptr], eax
@ -805,7 +815,7 @@ transmit:
.wait_to_send:
DEBUGF 2,"Waiting for TX buffer\n"
DEBUGF 1,"Waiting for TX buffer\n"
call GetTimerTicks ; returns in eax
lea edx, [eax + 100]
@ -818,11 +828,11 @@ transmit:
cmp edx, eax
jb .l2
DEBUGF 1,"Send timeout\n"
DEBUGF 2,"Send timeout\n"
xor eax, eax
dec eax
.fail:
DEBUGF 1,"Send failed\n"
DEBUGF 2,"Send failed\n"
stdcall KernelFree, [esp+4]
or eax, -1
ret 8
@ -842,7 +852,7 @@ int_handler:
push ebx esi edi
DEBUGF 1,"\n%s int\n", my_service
DEBUGF 1,"int\n"
; Find pointer of device wich made IRQ occur
@ -874,11 +884,11 @@ int_handler:
.got_it:
DEBUGF 1,"Device: %x Status: %x ", ebx, ax
DEBUGF 1,"Device: %x Status: %x\n", ebx, ax
push ax
test word [esp], RX_FINISH
test word[esp], RX_FINISH
jz .no_RX
push ebx
@ -886,45 +896,40 @@ int_handler:
pop ebx
; Find the current RX descriptor
movzx edx, [device.cur_rx]
shl edx, 5
lea edx, [device.rx_ring + edx]
; Check the descriptor status
mov cx, [edx + x_head.status]
test cx, DSC_OWNER_MAC
jnz .no_RX
DEBUGF 2,"packet status=0x%x\n", cx
DEBUGF 1,"packet status=0x%x\n", cx
test cx, DSC_RX_ERR ; Global error status set
jnz .no_RX
; Packet successfully received
movzx ecx, [edx + x_head.len]
and ecx, 0xFFF
sub ecx, 4 ; Do not count the CRC
; Update stats
add dword [device.bytes_rx], ecx
adc dword [device.bytes_rx + 4], 0
inc dword [device.packets_rx]
; Update stats
add dword[device.bytes_rx], ecx
adc dword[device.bytes_rx + 4], 0
inc dword[device.packets_rx]
; Push packet size and pointer, kernel will need it..
push ebx
push .more_RX
push ecx
push [edx + x_head.skb_ptr]
DEBUGF 2,"packet ptr=0x%x\n", [edx + x_head.skb_ptr]
DEBUGF 1,"packet ptr=0x%x\n", [edx + x_head.skb_ptr]
; reset the RX descriptor
push edx
stdcall KernelAlloc, MAX_BUF_SIZE
pop edx
@ -934,18 +939,16 @@ int_handler:
mov [edx + x_head.status], DSC_OWNER_MAC
; Use next descriptor next time
inc [device.cur_rx]
and [device.cur_rx], RX_RING_SIZE - 1
; At last, send packet to kernel
jmp Eth_input
.no_RX:
test word [esp], TX_FINISH
test word[esp], TX_FINISH
jz .no_TX
.loop_tx:
@ -959,7 +962,7 @@ int_handler:
cmp [edi + x_head.skb_ptr], 0
je .no_TX
DEBUGF 2,"Freeing buffer 0x%x\n", [edi + x_head.skb_ptr]
DEBUGF 1,"Freeing buffer 0x%x\n", [edi + x_head.skb_ptr]
push [edi + x_head.skb_ptr]
mov [edi + x_head.skb_ptr], 0
@ -971,6 +974,42 @@ int_handler:
jmp .loop_tx
.no_TX:
test word[esp], RX_NO_DESC
jz .no_rxdesc
DEBUGF 2, "No more RX descriptors!\n"
.no_rxdesc:
test word[esp], RX_FIFO_FULL
jz .no_rxfifo
DEBUGF 2, "RX FIFO full!\n"
.no_rxfifo:
test word[esp], RX_EARLY
jz .no_rxearly
DEBUGF 1, "RX early\n"
.no_rxearly:
test word[esp], TX_EARLY
jz .no_txearly
DEBUGF 1, "TX early\n"
.no_txearly:
test word[esp], EVENT_OVRFL
jz .no_ovrfl
DEBUGF 2, "Event counter overflow!\n"
.no_ovrfl:
test word[esp], LINK_CHANGED
jz .no_link
DEBUGF 1, "Link changed\n"
.no_link:
pop ax
pop edi esi ebx
@ -983,7 +1022,7 @@ int_handler:
align 4
init_mac_regs:
DEBUGF 2,"initializing MAC regs\n"
DEBUGF 1,"initializing MAC regs\n"
; MAC operation register
mov ax, 1
@ -1012,7 +1051,7 @@ init_mac_regs:
align 4
proc phy_read stdcall, phy_addr:dword, reg:dword
DEBUGF 2,"PHY read, addr=0x%x reg=0x%x\n", [phy_addr]:8, [reg]:8
DEBUGF 1,"PHY read, addr=0x%x reg=0x%x\n", [phy_addr]:8, [reg]:8
mov eax, [phy_addr]
shl eax, 8
@ -1036,7 +1075,7 @@ proc phy_read stdcall, phy_addr:dword, reg:dword
in ax, dx
and eax, 0xFFFF
DEBUGF 2,"PHY read, val=0x%x\n", eax:4
DEBUGF 1,"PHY read, val=0x%x\n", eax:4
ret
@ -1050,7 +1089,7 @@ endp
align 4
proc phy_write stdcall, phy_addr:dword, reg:dword, val:dword
DEBUGF 2,"PHY write, addr=0x%x reg=0x%x val=0x%x\n", [phy_addr]:8, [reg]:8, [val]:8
DEBUGF 1,"PHY write, addr=0x%x reg=0x%x val=0x%x\n", [phy_addr]:8, [reg]:8, [val]:8
mov eax, [val]
set_io 0
@ -1076,7 +1115,7 @@ proc phy_write stdcall, phy_addr:dword, reg:dword, val:dword
jnz .write
@@:
DEBUGF 2,"PHY write ok\n"
DEBUGF 1,"PHY write ok\n"
ret
endp
@ -1086,7 +1125,7 @@ endp
align 4
read_mac:
DEBUGF 2,"Reading MAC: "
DEBUGF 1,"Reading MAC: "
mov cx, 3
lea edi, [device.mac]
@ -1100,7 +1139,7 @@ read_mac:
dec cx
jnz .mac
DEBUGF 2,"%x-%x-%x-%x-%x-%x\n",[edi-6]:2, [edi-5]:2, [edi-4]:2, [edi-3]:2, [edi-2]:2, [edi-1]:2
DEBUGF 1,"%x-%x-%x-%x-%x-%x\n",[edi-6]:2, [edi-5]:2, [edi-4]:2, [edi-3]:2, [edi-2]:2, [edi-1]:2
ret