From d17706e476b5b2e40e4d63c5fa2a72baa7c24770 Mon Sep 17 00:00:00 2001 From: hidnplayr Date: Thu, 22 Sep 2011 04:08:56 +0000 Subject: [PATCH] NET branch: - cleanup in stack.inc + re-organisation of device pointers - i8255x driver stub - fix in sis900 driver (still untested) git-svn-id: svn://kolibrios.org@2220 a494cfbc-eb01-0410-851d-a64ba20cac60 --- kernel/branches/net/drivers/i8255x.asm | 1113 ++++++++++++++++++++++ kernel/branches/net/drivers/sis900.asm | 5 +- kernel/branches/net/network/ethernet.inc | 20 - kernel/branches/net/network/stack.inc | 140 ++- 4 files changed, 1212 insertions(+), 66 deletions(-) create mode 100644 kernel/branches/net/drivers/i8255x.asm diff --git a/kernel/branches/net/drivers/i8255x.asm b/kernel/branches/net/drivers/i8255x.asm new file mode 100644 index 0000000000..bf03af15b4 --- /dev/null +++ b/kernel/branches/net/drivers/i8255x.asm @@ -0,0 +1,1113 @@ +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; ;; +;; Copyright (C) KolibriOS team 2004-2010. All rights reserved. ;; +;; Distributed under terms of the GNU General Public License ;; +;; ;; +;; i8255x (Intel eepro 100) driver for KolibriOS ;; +;; ;; +;; Written by hidnplayr@kolibrios.org ;; +;; ;; +;; GNU GENERAL PUBLIC LICENSE ;; +;; Version 2, June 1991 ;; +;; ;; +;; ;; +;; Good read about how to program this family of devices: ;; +;; http://www.intel.com/design/network/manuals/8255x_opensdm.htm ;; +;; ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + + +format MS COFF + + API_VERSION equ 0x01000100 + DRIVER_VERSION equ 1 + + MAX_DEVICES equ 16 + + DEBUG equ 1 + __DEBUG__ equ 1 + __DEBUG_LEVEL__ equ 1 + +include 'proc32.inc' +include 'imports.inc' +include 'fdo.inc' +include 'netdrv.inc' + +public START +public service_proc +public version + +virtual at ebx + + device: + + ETH_DEVICE + + .io_addr dd ? + .pci_bus db ? + .pci_dev db ? + .irq_line db ? + + .rx_buffer dd ? + .tx_buffer dd ? + + .ee_bus_width dd ? + + rxfd: + .status dw ? + .command dw ? + .link dd ? + .rx_buf_addr dd ? + .count dw ? + .size dw ? + .packet dd ? + + txfd: + .status dw ? + .command dw ? + .link dd ? + .tx_desc_addr dd ? + .count dd ? + .tx_buf_addr0 dd ? + .tx_buf_size0 dd ? + .tx_buf_addr1 dd ? + .tx_buf_size1 dd ? + + confcmd: + .status: dw ? + .command: dw ? + .link: dd ? + .data rb 64 + + lstats: + tx_good_frames dd ? + tx_coll16_errs dd ? + tx_late_colls dd ? + tx_underruns dd ? + tx_lost_carrier dd ? + tx_deferred dd ? + tx_one_colls dd ? + tx_multi_colls dd ? + tx_total_colls dd ? + + rx_good_frames dd ? + rx_crc_errs dd ? + rx_align_errs dd ? + rx_resource_errs dd ? + rx_overrun_errs dd ? + rx_colls_errs dd ? + rx_runt_errs dd ? + + device_size = $ - device + +end virtual + + +; Serial EEPROM + +EE_SK equ 1 shl 16 ; serial clock +EE_CS equ 1 shl 17 ; chip select +EE_DI equ 1 shl 18 ; data in +EE_DO equ 1 shl 19 ; data out + +EE_READ equ 110b +EE_WRITE equ 101b +EE_ERASE equ 111b + +; The SCB accepts the following controls for the Tx and Rx units: + +CU_START equ 0x0010 +CU_RESUME equ 0x0020 +CU_STATSADDR equ 0x0040 +CU_SHOWSTATS equ 0x0050 ; Dump statistics counters. +CU_CMD_BASE equ 0x0060 ; Base address to add to add CU commands. +CU_DUMPSTATS equ 0x0070 ; Dump then reset stats counters. + +RX_START equ 0x0001 +RX_RESUME equ 0x0002 +RX_ABORT equ 0x0004 +RX_ADDR_LOAD equ 0x0006 +RX_RESUMENR equ 0x0007 +INT_MASK equ 0x0100 +DRVR_INT equ 0x0200 ; Driver generated interrupt + +CmdIASetup equ 0x0001 +CmdConfigure equ 0x0002 +CmdTx equ 0x0004 ;;;; +CmdTxFlex equ 0x0008 ;;; +Cmdsuspend equ 0x4000 + + +reg_scb_status equ 0 +reg_scb_cmd equ 2 +reg_scb_ptr equ 4 +reg_port equ 8 +reg_eeprom_ctrl equ 12 +reg_eeprom equ 14 +reg_mdi_ctrl equ 16 + + +macro delay { + push eax + in eax, dx + in eax, dx + in eax, dx + in eax, dx + in eax, dx + in eax, dx + in eax, dx + in eax, dx + in eax, dx + in eax, dx + pop eax +} + +section '.flat' code readable align 16 + +;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; ;; +;; proc START ;; +;; ;; +;; (standard driver proc) ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +proc START stdcall, state:dword + + cmp [state], 1 + jne .exit + + .entry: + + DEBUGF 1,"Loading I8255x driver\n" + stdcall RegService, my_service, service_proc + ret + + .fail: + .exit: + xor eax, eax + ret + +endp + + +;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; ;; +;; proc SERVICE_PROC ;; +;; ;; +;; (standard driver proc) ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +align 4 +proc service_proc stdcall, ioctl:dword + + mov edx, [ioctl] + mov eax, [IOCTL.io_code] + +;------------------------------------------------------ + + cmp eax, 0 ;SRV_GETVERSION + jne @F + + cmp [edx+IOCTL.out_size], 4 + jl .fail + mov eax, [edx+IOCTL.output] + mov [eax], dword API_VERSION + + xor eax, eax + ret + +;------------------------------------------------------ + @@: + cmp eax, 1 ;SRV_HOOK + jne .fail + + cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes + jl .fail + + mov eax, [edx + IOCTL.input] + cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given + jne .fail ; other types arent supported for this card yet + +; check if the device is already listed + + mov esi, device_list + mov ecx, [devices] + test ecx, ecx + jz .firstdevice + +; mov eax, [IOCTL.input] ; get the pci bus and device numbers + mov ax , [eax+1] ; + .nextdevice: + mov ebx, [esi] + cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte) + je .find_devicenum ; Device is already loaded, let's find it's device number + add esi, 4 + loop .nextdevice + + +; This device doesnt have its own eth_device structure yet, lets create one + .firstdevice: + cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card + jge .fail + + push edx + stdcall KernelAlloc, device_size + pop edx + test eax, eax + jz .fail + mov ebx, eax ; ebx is always used as a pointer to the structure (in driver, but also in kernel code) + +; Fill in the direct call addresses into the struct + + mov [device.reset], reset + mov [device.transmit], transmit +; mov [device.get_MAC], read_mac + mov [device.set_MAC], MAC_write + mov [device.unload], unload + mov [device.name], my_service + +; save the pci bus and device numbers + + mov eax, [IOCTL.input] + mov cl , [eax+1] + mov [device.pci_bus], cl + mov cl , [eax+2] + mov [device.pci_dev], cl + +; Now, it's time to find the base io addres of the PCI device + + find_io [device.pci_bus], [device.pci_dev], [device.io_addr] + +; We've found the io address, find IRQ now + + find_irq [device.pci_bus], [device.pci_dev], [device.irq_line] + + DEBUGF 2,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ + [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:4 + + allocate_and_clear [device.rx_buffer], (4096), .err + allocate_and_clear [device.tx_buffer], (4096), .err + +; Ok, the eth_device structure is ready, let's probe the device + + call probe ; this function will output in eax + test eax, eax + jnz .err ; If an error occured, exit + + mov eax, [devices] ; Add the device structure to our device list + mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) + inc [devices] ; + + + mov [device.type], NET_TYPE_ETH + call NetRegDev + + cmp eax, -1 + je .err + + ret + +; If the device was already loaded, find the device number and return it in eax + + .find_devicenum: + DEBUGF 2,"Trying to find device number of already registered device\n" + call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx + ; into a device number in edi + mov eax, edi ; Application wants it in eax instead + DEBUGF 2,"Kernel says: %u\n", eax + ret + +; If an error occured, remove all allocated data and exit (returning -1 in eax) + + .err: + stdcall KernelFree, [device.rx_buffer] + stdcall KernelFree, [device.tx_buffer] + stdcall KernelFree, ebx + + .fail: + or eax, -1 + ret + +;------------------------------------------------------ +endp + + + + + +;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; +;; ;; +;; Actual Hardware dependent code starts here ;; +;; ;; +;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; + + +unload: + ; TODO: (in this particular order) + ; + ; - Stop the device + ; - Detach int handler + ; - Remove device from local list (RTL8139_LIST) + ; - call unregister function in kernel + ; - Remove all allocated structures and buffers the card used + + or eax,-1 + +ret + + +;------------- +; +; Probe +; +;------------- + +align 4 +probe: + + DEBUGF 1,"Probing i8255x\n" + + make_bus_master [device.pci_bus], [device.pci_dev] + +;--------------------------- +; First, identify the device + + movzx ecx, [device.pci_bus] + movzx edx, [device.pci_dev] + stdcall PciRead32, ecx ,edx ,0 ; get device/vendor id + + DEBUGF 1,"Vendor id: 0x%x\n", ax + + cmp ax , 0x8086 + jne .notfound + shr eax, 16 + + DEBUGF 1,"Device id: 0x%x\n", ax + + mov ecx, DEVICE_IDs + mov esi, device_id_list + repne scasw + jne .notfound + jmp .found + + .notfound: + DEBUGF 1,"Device/Vendor ID not found in list!\n" + or eax, -1 + ret + + .found: + + call ee_get_width + call MAC_read_eeprom + + ;;; TODO: detect phy + + + +;---------- +; +; Reset +; +;---------- + +align 4 +reset: + +;--------------- +; reset the card + + set_io 0 + set_io reg_port + xor eax, eax ; Software Reset + out dx, eax + + mov esi, 10 + call Sleep ; Give the card time to warm up. + +;--------------------------------- +; Tell device where to store stats + + lea eax, [lstats] + GetRealAddr + set_io reg_scb_ptr + out dx, eax + + mov ax, INT_MASK + CU_STATSADDR + set_io reg_scb_cmd + out dx, ax + call cmd_wait + +;----------------- +; Set CU base to 0 + + xor eax, eax + set_io reg_scb_ptr + out dx, eax + + mov ax, INT_MASK + RX_ADDR_LOAD + set_io reg_scb_cmd + out dx, ax + call cmd_wait + +;--------------------- +; build rxfd structure + + mov ax, 0x0001 + mov [rxfd.status], ax + mov ax, 0x0000 + mov [rxfd.command], ax + + lea eax, [rxfd.status] + GetRealAddr + mov [rxfd.link], eax + + lea eax, [device.rx_buffer] + GetRealAddr + mov [rxfd.rx_buf_addr], eax + + xor ax, ax + mov [rxfd.count], ax + + mov ax, 1528 + mov [rxfd.size], ax + +;------------------------------- +; Set ptr to first command block + + set_io reg_scb_ptr + lea eax, [rxfd] + GetRealAddr + out dx, eax + + set_io reg_scb_cmd + mov ax, INT_MASK + RX_START + out dx, ax + call cmd_wait + +;------------------- +; start the receiver + + mov [rxfd.status], 0 + mov [rxfd.command], 0xc000 + + set_io reg_scb_ptr + lea eax, [rxfd] + GetRealAddr + out dx, eax + + set_io reg_scb_cmd + mov ax, INT_MASK + RX_START + out dx, ax + call cmd_wait + +;----------------- +; set CU base to 0 + + set_io reg_scb_ptr + xor eax, eax + out dx, eax + + set_io reg_scb_cmd + mov ax, INT_MASK + CU_CMD_BASE + out dx, ax + call cmd_wait + +;-------------------- +; Set TX Base address + +; First, set up confcmd values + + mov [txfd.command], CmdIASetup + mov [txfd.status], 0 + lea eax, [confcmd] + GetRealAddr + mov [txfd.link], eax + + mov word [confcmd.command], Cmdsuspend + CmdConfigure + mov word [confcmd.status], 0 + lea eax, [txfd] + GetRealAddr + mov [confcmd.link], eax + + mov byte [confcmd.data + 1], 0x88 ; fifo of 8 each + mov byte [confcmd.data + 4], 0 + mov byte [confcmd.data + 5], 0x80 + mov byte [confcmd.data + 15], 0x48 + mov byte [confcmd.data + 19], 0x80 + mov byte [confcmd.data + 21], 0x05 + + +; CU start + +; lea eax, [txfd] +; GetRealAddr + set_io 0 + set_io reg_scb_ptr + out dx, eax + + mov ax, INT_MASK + CU_START + set_io reg_scb_cmd + out dx, ax + call cmd_wait + +; wait for thing to start + +; drp004: +; +; cmp [txfd.status], 0 +; jz drp004 + +; Indicate that we have successfully reset the card + + +;;; enable interrupts + + xor eax, eax + + ret + + + + + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; ;; +;; Transmit ;; +;; ;; +;; In: buffer pointer in [esp] ;; +;; size of buffer in [esp+4] ;; +;; pointer to device structure in ebx ;; +;; ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +align 4 +transmit: + + DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n",[esp],[esp+4] + mov eax, [esp] + DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ + [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ + [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ + [eax+13]:2,[eax+12]:2 + + cmp dword [esp+4], 1500 + jg .finish ; packet is too long + cmp dword [esp+4], 60 + jl .finish ; packet is too short + + set_io 0 + in ax, dx + and ax, 0xfc00 + out dx, ax + + mov [txfd.status], 0 + mov [txfd.command], Cmdsuspend + CmdTx + CmdTxFlex + lea eax, [txfd] + GetRealAddr + mov [txfd.link], eax + mov [txfd.count], 0x02208000 + lea eax, [txfd.tx_buf_addr0] + GetRealAddr + mov [txfd.tx_desc_addr], eax + + mov eax, [esp] + mov [txfd.tx_buf_addr0], eax + mov eax, [esp+4] + mov [txfd.tx_buf_size0], eax + + ; Copy the buffer address and size in + mov [txfd.tx_buf_addr1], 0 + mov [txfd.tx_buf_size1], 0 + + lea eax, [txfd] + GetRealAddr + set_io reg_scb_ptr + out dx, eax + + mov ax, INT_MASK + CU_START + set_io reg_scb_cmd + out dx, ax + + call cmd_wait + + set_io 0 + in ax, dx + + .I8t_001: + cmp [txfd.status], 0 + je .I8t_001 + + set_io 0 + in ax, dx + + .finish: + ret + + + +;;;;;;;;;;;;;;;;;;;;;;; +;; ;; +;; Interrupt handler ;; +;; ;; +;;;;;;;;;;;;;;;;;;;;;;; + +align 4 +int_handler: + + DEBUGF 1,"IRQ %x ",eax:2 ; no, you cant replace 'eax:2' with 'al', this must be a bug in FDO + +; find pointer of device wich made IRQ occur + + mov esi, device_list + mov ecx, [devices] + test ecx, ecx + jz .fail +.nextdevice: + mov ebx, dword [esi] + + set_io 0 + ;; set_io REG_ISR + ;; in ax , dx + ;; out dx , ax ; send it back to ACK + + add esi, 4 + + test ax , ax + jnz .got_it + + dec ecx + jnz .nextdevice + + ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver) + + .got_it: + + + ;;; receive + + cmp [rxfd.status], 0 + je .nodata + + mov [rxfd.status], 0 + mov [rxfd.command], 0xc000 + + set_io reg_scb_ptr + lea eax, [rxfd.status] + GetRealAddr + out dx, eax + + set_io reg_scb_cmd + mov ax, INT_MASK + RX_START + out dx, ax + + call cmd_wait + + movzx ecx, [rxfd.count] + and ecx, 0x3fff + + stdcall KernelAlloc, ecx ; Allocate a buffer to put packet into + push ecx + push eax + + lea esi, [device.rx_buffer] + + .copy: + shr ecx, 1 + jnc .nb + movsb + .nb: + shr ecx, 1 + jnc .nw + movsw + .nw: + jz .nd + rep movsd + .nd: + + jmp EthReceiver ; Send it to kernel + + .nodata: + .fail: + + ret + + + + +align 4 +cmd_wait: + + in al , dx + test al , al + jnz cmd_wait + + ret + + + + + + +align 4 +ee_read: ; esi = address to read + + set_io 0 + set_io reg_eeprom + +;----------------------------------------------------- +; Prepend start bit + read opcode to the address field +; and shift it to the very left bits of esi + + mov ecx, 32 + sub ecx, [device.ee_bus_width] + shl esi, cl + or esi, EE_READ shl 28 + + mov ecx, [device.ee_bus_width] + add ecx, 3 + +;----------------------- +; Write this to the chip + + .loop: + mov eax, EE_CS + shl esi, 1 + jnc @f + or eax, EE_DI + @@: + out dx , eax + delay + + or eax, EE_SK + out dx , eax + delay + + loop .loop + +;------------------------------ +; Now read the data from eeprom + + xor esi, esi + mov ecx, 16 + + .loop2: + mov eax, EE_CS + EE_SK + out dx , eax + delay + + in eax, dx + test eax, EE_DO + jz @f + inc esi + @@: + shl esi, 1 + + mov eax, EE_CS + out dx , eax + delay + + loop .loop2 + +;----------------------- +; de-activate the eeprom + + xor eax, eax + out dx, eax + + + DEBUGF 1,"data=%x\n", esi + ret + + + +align 4 +ee_write: ; esi = address to write to, di = data + + set_io 0 + set_io reg_eeprom + +;----------------------------------------------------- +; Prepend start bit + write opcode to the address field +; and shift it to the very left bits of esi + + mov ecx, 32 + sub ecx, [device.ee_bus_width] + shl esi, cl + or esi, EE_WRITE shl 28 + + mov ecx, [device.ee_bus_width] + add ecx, 3 + +;----------------------- +; Write this to the chip + + .loop: + mov eax, EE_CS + shl esi, 1 + jnc @f + or eax, EE_DI + @@: + out dx , eax + delay + + or eax, EE_SK + out dx , eax + delay + + loop .loop + +;----------------------------- +; Now write the data to eeprom + + mov ecx, 16 + + .loop2: + mov eax, EE_CS + shl di , 1 + jnc @f + or eax, EE_DI + @@: + out dx , eax + delay + + or eax, EE_SK + out dx , eax + delay + + loop .loop2 + +;----------------------- +; de-activate the eeprom + + xor eax, eax + out dx, eax + + + ret + + + +align 4 +ee_get_width: + + set_io 0 + set_io reg_eeprom + + mov esi, EE_READ shl 28 + xor ecx, ecx + + .loop: + mov eax, EE_CS + shl esi + jnc @f + or eax, EE_DI + @@: + out dx , eax + delay + + or eax, EE_SK + out dx , eax + delay + + inc ecx + + in eax, dx + test eax, EE_DO + jnz .loop + + sub ecx, 3 + + DEBUGF 1,"bus width=%u\n", ecx + + mov [device.ee_bus_width], ecx + +;------------------------------ +; Now read the data from eeprom + + mov ecx, 16 + .loop2: + mov eax, EE_CS + out dx , eax + delay + + or eax, EE_SK + out dx , eax + delay + loop .loop2 + +;----------------------- +; de-activate the eeprom + + xor eax, eax + out dx, eax + + ret + + + +; cx = phy addr +; dx = phy reg addr + +; ax = data + +align 4 +mdio_read: + + shl ecx, 21 ; PHY addr + shl edx, 16 ; PHY reg addr + + mov eax, ecx + or eax, edx + or eax, 10b shl 26 ; read opcode + + set_io 0 + set_io reg_mdi_ctrl + out dx, eax + + .wait: + delay + in eax, dx + test eax, 1 shl 28 ; ready bit + jz .wait + + ret + +; ax = data +; cx = phy addr +; dx = phy reg addr + +; ax = data + +align 4 +mdio_write: + + and eax, 0xffff + + shl ecx, 21 ; PHY addr + shl edx, 16 ; PHY reg addr + + or eax, ecx + or eax, edx + or eax, 01b shl 26 ; write opcode + + set_io 0 + set_io reg_mdi_ctrl + out dx, eax + + .wait: + delay + in eax, dx + test eax, 1 shl 28 ; ready bit + jz .wait + + ret + + + +align 4 +MAC_read_eeprom: + +;;;; + + ret + + +align 4 +MAC_write: + +;;;; + + ret + + + + +; End of code + +align 4 ; Place all initialised data here + +devices dd 0 ; number of currently running devices +version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF) +my_service db 'i8255x',0 ; max 16 chars include zero +devicename db 'Intel Etherexpress pro/100',0 + + +device_id_list: + + dw 0x1029 + dw 0x1030 + dw 0x1031 + dw 0x1032 + dw 0x1033 + dw 0x1034 + dw 0x1038 + dw 0x1039 + dw 0x103A + dw 0x103B + dw 0x103C + dw 0x103D + dw 0x103E + dw 0x1050 + dw 0x1051 + dw 0x1052 + dw 0x1053 + dw 0x1054 + dw 0x1055 + dw 0x1056 + dw 0x1057 + dw 0x1059 + dw 0x1064 + dw 0x1065 + dw 0x1066 + dw 0x1067 + dw 0x1068 + dw 0x1069 + dw 0x106A + dw 0x106B + dw 0x1091 + dw 0x1092 + dw 0x1093 + dw 0x1094 + dw 0x1095 + dw 0x10fe + dw 0x1209 + dw 0x1229 + dw 0x2449 + dw 0x2459 + dw 0x245D + dw 0x27DC + +DEVICE_IDs = ($ - device_id_list) / 2 + +mac_82557_D100_A = 0 +mac_82557_D100_B = 1 +mac_82557_D100_C = 2 +mac_82558_D101_A4 = 4 +mac_82558_D101_B0 = 5 +mac_82559_D101M = 8 +mac_82559_D101S = 9 +mac_82550_D102 = 12 +mac_82550_D102_C = 13 +mac_82551_E = 14 +mac_82551_F = 15 +mac_82551_10 = 16 +mac_unknown = 0xFF + +phy_100a = 0x000003E0 +phy_100c = 0x035002A8 +phy_82555_tx = 0x015002A8 +phy_nsc_tx = 0x5C002000 +phy_82562_et = 0x033002A8 +phy_82562_em = 0x032002A8 +phy_82562_ek = 0x031002A8 +phy_82562_eh = 0x017002A8 +phy_82552_v = 0xd061004d +phy_unknown = 0xFFFFFFFF + + +include_debug_strings ; All data wich FDO uses will be included here + +section '.data' data readable writable align 16 ; place all uninitialized data place here + +device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling + diff --git a/kernel/branches/net/drivers/sis900.asm b/kernel/branches/net/drivers/sis900.asm index 8cdf705065..f97a0500ac 100644 --- a/kernel/branches/net/drivers/sis900.asm +++ b/kernel/branches/net/drivers/sis900.asm @@ -436,7 +436,7 @@ probe: ; Get Card Revision stdcall PciRead8, dword [device.pci_bus], dword [device.pci_dev], 0x08 - mov [pci_revision], al ; save the revision for later use + mov [device.pci_revision], al ; save the revision for later use ; Look up through the specific_table mov esi, specific_table @@ -1255,7 +1255,8 @@ transmit: jl transmit_finish movzx ecx, [device.cur_tx] - mov ecx, [device.txd+ecx*16] + shl ecx, 4 + mov ecx, [device.txd+ecx] ;; TODO: check if desc is empty (for example: check for eax, 0x6200000 at [ecx+4] ;;; or: count number of available descriptors diff --git a/kernel/branches/net/network/ethernet.inc b/kernel/branches/net/network/ethernet.inc index ffc1624e91..19307ebb39 100644 --- a/kernel/branches/net/network/ethernet.inc +++ b/kernel/branches/net/network/ethernet.inc @@ -44,26 +44,6 @@ iglobal ETH_BROADCAST dp 0xffffffffffff endg -align 4 -uglobal - ETH_RUNNING dd ? -endg - - -;----------------------------------------------------------------- -; -; ETH_init -; -; This function resets all ethernet variables -; -;----------------------------------------------------------------- -macro ETH_init { - - mov [ETH_RUNNING], 0 - -} - - ;----------------------------------------------------------------- ; ; ETH_input diff --git a/kernel/branches/net/network/stack.inc b/kernel/branches/net/network/stack.inc index d0aa844945..22848e85f8 100644 --- a/kernel/branches/net/network/stack.inc +++ b/kernel/branches/net/network/stack.inc @@ -176,7 +176,7 @@ align 4 uglobal NET_RUNNING dd ? - NET_DRV_LIST rd MAX_NET_DEVICES + NET_DRV_LIST rd (MAX_NET_DEVICES + 1) ; device 0 is a link to the default device endg @@ -197,10 +197,9 @@ stack_init: ; Init the network drivers list xor eax, eax mov edi, NET_RUNNING - mov ecx, MAX_NET_DEVICES + 1 + mov ecx, (MAX_NET_DEVICES + 2) rep stosd - ETH_init ; SLIP_init ; PPPOE_init @@ -259,7 +258,7 @@ stack_handler: ;----------------------------------------------------------------- ; -; NET_add_Device: +; NET_add_device: ; ; This function is called by the network drivers, ; to register each running NIC to the kernel @@ -271,7 +270,7 @@ stack_handler: align 4 NET_add_device: - DEBUGF 1,"NET_Add_Device: %x\n", ebx + DEBUGF 1,"NET_Add_Device: %x\n", ebx ;;; TODO: use mutex to lock net device list mov eax, [NET_RUNNING] cmp eax, MAX_NET_DEVICES @@ -280,57 +279,41 @@ NET_add_device: ;---------------------------------- ; Check if device is already listed mov eax, ebx - mov ecx, MAX_NET_DEVICES ; We need to check whole list because a device may be removed without re-organizing list - mov edi, NET_DRV_LIST + mov ecx, MAX_NET_DEVICES ; We need to check whole list because a device may be removed without re-organizing list + mov edi, NET_DRV_LIST+4 - repne scasd ; See if device is already in the list + repne scasd ; See if device is already in the list jz .error ;---------------------------- ; Find empty slot in the list xor eax, eax mov ecx, MAX_NET_DEVICES - mov edi, NET_DRV_LIST + mov edi, NET_DRV_LIST+4 repne scasd jnz .error sub edi, 4 - cmp [ebx + NET_DEVICE.type], NET_TYPE_ETH - je .ethernet - - cmp [ebx + NET_DEVICE.type], NET_TYPE_SLIP - je .slip - - DEBUGF 1,"Unknown network device type: %u\n", [ebx + NET_DEVICE.type] - jmp .error - - .ethernet: - DEBUGF 1,"Trying to add an ethernet device\n" - - inc [ETH_RUNNING] ; Indicate that one more ethernet device is up and running - jmp .add_it - - .slip: - DEBUGF 1,"Trying to add a slip device\n" - ;;;; - jmp .error - - - .add_it: - ;----------------------------- ; Add device to the found slot - mov [edi], ebx ; add device to list + mov [edi], ebx ; add device to list - sub edi, NET_DRV_LIST ; Calculate device number in eax - mov eax, edi ; + mov eax, edi ; Calculate device number in eax + sub eax, NET_DRV_LIST shr eax, 2 - inc [NET_RUNNING] ; Indicate that one more network device is up and running + inc [NET_RUNNING] ; Indicate that one more network device is up and running - DEBUGF 1,"Device number: %u\n",eax + cmp eax, 1 ; If it's the first network device, try to set it as default + jne @f + push eax + call NET_set_default + pop eax + @@: + + DEBUGF 1,"Device number: %u\n", eax ret .error: @@ -340,13 +323,46 @@ NET_add_device: +;----------------------------------------------------------------- +; +; NET_set_default +; +; API to set the default interface +; +; IN: Device num in eax +; OUT: Device num in eax, -1 on error +; +;----------------------------------------------------------------- +align 4 +NET_set_default: + + DEBUGF 1,"NET_set_default %x\n", eax + + cmp eax, MAX_NET_DEVICES + jge .error + + cmp [NET_DRV_LIST+eax*4], 0 + je .error + + push [NET_DRV_LIST+eax*4] + pop [NET_DRV_LIST] + + DEBUGF 1,"Device number %u is now default!\n", eax + ret + + .error: + or eax, -1 + DEBUGF 2,"Setting default network device failed\n" + ret + + ;----------------------------------------------------------------- ; ; NET_Remove_Device: ; ; This function is called by etwork drivers, ; to unregister network devices from the kernel -; +; d ; IN: Pointer to device structure in ebx ; OUT: eax: -1 on error ; @@ -357,12 +373,27 @@ NET_remove_device: cmp [NET_RUNNING], 0 je .error + cmp [NET_DRV_LIST], ebx + jne @f + mov [NET_DRV_LIST], 0 + cmp [NET_RUNNING], 1 + je @f + ; there are still active devices, find one and make it default + xor eax, eax + mov ecx, MAX_NET_DEVICES + mov edi, NET_DRV_LIST+4 + repe scasd + jz @f + push dword [edi-4] + pop [NET_DRV_LIST] + @@: + ;---------------------------- ; Find the driver in the list mov eax, ebx mov ecx, MAX_NET_DEVICES - mov edi, NET_DRV_LIST + mov edi, NET_DRV_LIST+4 repne scasd jnz .error @@ -395,7 +426,7 @@ NET_ptr_to_num: push ecx mov ecx, MAX_NET_DEVICES - mov edi, NET_DRV_LIST + mov edi, NET_DRV_LIST+4 .loop: cmp ebx, [edi] @@ -551,17 +582,19 @@ sys_network: jmp .return @@: - cmp bh, MAX_NET_DEVICES ; Check if device number exists + cmp bh, MAX_NET_DEVICES ; Check if device number exists jge .doesnt_exist mov esi, ebx and esi, 0x0000ff00 shr esi, 6 - cmp dword [esi + NET_DRV_LIST], 0 ; check if driver is running + cmp dword [esi + NET_DRV_LIST], 0 ; check if driver is running je .doesnt_exist - test bl, bl ; 0 = Get device type (ethernet/token ring/...) + + + test bl, bl ; 0 = Get device type (ethernet/token ring/...) jnz @f xor eax, eax @@ -605,10 +638,29 @@ sys_network: jnz @f ; ..; + xor eax, eax + jmp .return + + + @@: + dec bl ; 5 = Get driver name + jnz @f + + ; ..; + xor eax, eax + jmp .return + + + @@: + dec bl ; 6 = Set default device + jnz @f + + mov eax, esi + call NET_set_default + jmp .return @@: -; ... ; 5 Get driver name .doesnt_exist: DEBUGF 1,"sys_network: invalid device/function specified!\n"