;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Copyright (C) KolibriOS team 2004-2013. All rights reserved. ;; ;; Distributed under terms of the GNU General Public License ;; ;; ;; ;; STACK.INC ;; ;; ;; ;; TCP/IP stack for KolibriOS ;; ;; ;; ;; Written by hidnplayr@kolibrios.org ;; ;; ;; ;; Some parts of code are based on the work of: ;; ;; Mike Hibbett (menuetos network stack) ;; ;; Eugen Brasoveanu (solar os network stack and drivers) ;; ;; mike.dld (kolibrios socket code) ;; ;; ;; ;; TCP part is based on 4.4BSD ;; ;; ;; ;; GNU GENERAL PUBLIC LICENSE ;; ;; Version 2, June 1991 ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; $Revision: 3523 $ uglobal net_10ms dd ? net_tmr_count dw ? endg MAX_NET_DEVICES = 16 ARP_BLOCK = 1 ; true or false MIN_EPHEMERAL_PORT = 49152 MIN_EPHEMERAL_PORT_N = 0x00C0 ; same in Network byte order (FIXME) MAX_EPHEMERAL_PORT = 61000 MAX_EPHEMERAL_PORT_N = 0x48EE ; same in Network byte order (FIXME) ; Ethernet protocol numbers ETHER_ARP = 0x0608 ETHER_IPv4 = 0x0008 ETHER_IPv6 = 0xDD86 ETHER_PPP_DISCOVERY = 0x6388 ETHER_PPP_SESSION = 0x6488 ; PPP protocol numbers PPP_IPv4 = 0x2100 PPP_IPV6 = 0x5780 ;Protocol family AF_UNSPEC = 0 AF_LOCAL = 1 AF_INET4 = 2 AF_INET6 = 10 AF_PPP = 777 ; Internet protocol numbers IP_PROTO_IP = 0 IP_PROTO_ICMP = 1 IP_PROTO_TCP = 6 IP_PROTO_UDP = 17 ; PPP protocol number PPP_PROTO_ETHERNET = 666 ; Socket types SOCK_STREAM = 1 SOCK_DGRAM = 2 SOCK_RAW = 3 ; Socket options SO_ACCEPTCON = 1 shl 0 SO_BROADCAST = 1 shl 1 SO_DEBUG = 1 shl 2 SO_DONTROUTE = 1 shl 3 SO_KEEPALIVE = 1 shl 4 SO_OOBINLINE = 1 shl 5 SO_REUSEADDR = 1 shl 6 SO_REUSEPORT = 1 shl 7 SO_USELOOPBACK = 1 shl 8 SO_BINDTODEVICE = 1 shl 9 SO_BLOCK = 1 shl 10 ; TO BE REMOVED SO_NONBLOCK = 1 shl 31 ; Socket flags for user calls MSG_PEEK = 0x02 MSG_DONTWAIT = 0x40 ; Socket level SOL_SOCKET = 0 ; Socket States SS_NOFDREF = 0x0001 ; no file table ref any more SS_ISCONNECTED = 0x0002 ; socket connected to a peer SS_ISCONNECTING = 0x0004 ; in process of connecting to peer SS_ISDISCONNECTING = 0x0008 ; in process of disconnecting SS_CANTSENDMORE = 0x0010 ; can't send more data to peer SS_CANTRCVMORE = 0x0020 ; can't receive more data from peer SS_RCVATMARK = 0x0040 ; at mark on input SS_ISABORTING = 0x0080 ; aborting fd references - close() SS_RESTARTSYS = 0x0100 ; restart blocked system calls SS_ISDISCONNECTED = 0x0800 ; socket disconnected from peer SS_ASYNC = 0x0100 ; async i/o notify SS_ISCONFIRMING = 0x0200 ; deciding to accept connection req SS_MORETOCOME = 0x0400 SS_BLOCKED = 0x8000 SOCKET_MAXDATA = 4096*32 ; must be 4096*(power of 2) where 'power of 2' is at least 8 ; Network driver types NET_TYPE_LOOPBACK = 0 NET_TYPE_ETH = 1 NET_TYPE_SLIP = 2 MAX_backlog = 20 ; maximum backlog for stream sockets ; Error Codes ENOBUFS = 55 ECONNREFUSED = 61 ECONNRESET = 52 ETIMEDOUT = 60 ECONNABORTED = 53 ; Api protocol numbers API_ETH = 0 API_IPv4 = 1 API_ICMP = 2 API_UDP = 3 API_TCP = 4 API_ARP = 5 API_PPPOE = 6 API_IPv6 = 7 HWACC_TCP_IPv4 = 1 shl 0 struct NET_DEVICE type dd ? ; Type field mtu dd ? ; Maximal Transmission Unit name dd ? ; Ptr to 0 terminated string unload dd ? ; Ptrs to driver functions reset dd ? ; transmit dd ? ; bytes_tx dq ? ; Statistics, updated by the driver bytes_rx dq ? ; packets_tx dd ? ; packets_rx dd ? ; state dd ? ; link state (0 = no link) hwacc dd ? ; bitmask stating enabled HW accelerations (offload engines) ends ; Exactly as it says.. macro pseudo_random reg { add reg, [esp] rol reg, 5 xor reg, [timer_ticks] ; add reg, [CPU_FREQ] imul reg, 214013 xor reg, 0xdeadbeef rol reg, 9 } ; Network to Hardware byte order (dword) macro ntohd reg { rol word reg, 8 rol dword reg, 16 rol word reg , 8 } ; Network to Hardware byte order (word) macro ntohw reg { rol word reg, 8 } include "queue.inc" include "loopback.inc" include "ethernet.inc" include "PPPoE.inc" include "ARP.inc" include "IPv4.inc" include "IPv6.inc" include "icmp.inc" include "udp.inc" include "tcp.inc" include "socket.inc" align 4 uglobal NET_RUNNING dd ? NET_DEFAULT dd ? NET_DRV_LIST rd MAX_NET_DEVICES endg ;----------------------------------------------------------------- ; ; stack_init ; ; This function calls all network init procedures ; ; IN: / ; OUT: / ; ;----------------------------------------------------------------- align 4 stack_init: ; Init the network drivers list xor eax, eax mov edi, NET_RUNNING mov ecx, (MAX_NET_DEVICES + 2) rep stosd PPPoE_init IPv4_init ; IPv6_init ICMP_init ARP_init UDP_init TCP_init SOCKET_init mov [net_tmr_count], 0 ret ; Wakeup every tick. proc stack_handler_has_work? mov eax, [timer_ticks] cmp eax, [net_10ms] ret endp ;----------------------------------------------------------------- ; ; stack_handler ; ; This function is called in kernel loop ; ; IN: / ; OUT: / ; ;----------------------------------------------------------------- align 4 stack_handler: ; Test for 10ms tick mov eax, [timer_ticks] cmp eax, [net_10ms] je .exit mov [net_10ms], eax cmp [NET_RUNNING], 0 je .exit test [net_10ms], 0x0f ; 160ms jnz .exit TCP_timer_160ms test [net_10ms], 0x3f ; 640ms jnz .exit TCP_timer_640ms ARP_decrease_entry_ttls IPv4_decrease_fragment_ttls .exit: ret align 4 NET_link_changed: DEBUGF 1,"NET_link_changed device=0x%x status=0x%x\n", ebx, [ebx + NET_DEVICE.state] align 4 NET_send_event: DEBUGF 1,"NET_send_event\n" ; Send event to all applications push edi ecx mov edi, SLOT_BASE mov ecx, [TASK_COUNT] .loop: add edi, 256 or [edi + APPDATA.event_mask], EVENT_NETWORK2 loop .loop pop ecx edi ret ;----------------------------------------------------------------- ; ; NET_add_device: ; ; This function is called by the network drivers, ; to register each running NIC to the kernel ; ; IN: Pointer to device structure in ebx ; OUT: Device num in eax, -1 on error ; ;----------------------------------------------------------------- align 4 NET_add_device: DEBUGF 1,"NET_Add_Device: %x\n", ebx ;;; TODO: use mutex to lock net device list cmp [NET_RUNNING], MAX_NET_DEVICES jae .error ;---------------------------------- ; Check if device is already listed mov eax, ebx mov ecx, MAX_NET_DEVICES ; We need to check whole list because a device may be removed without re-organizing list mov edi, NET_DRV_LIST repne scasd ; See if device is already in the list jz .error ;---------------------------- ; Find empty slot in the list xor eax, eax mov ecx, MAX_NET_DEVICES mov edi, NET_DRV_LIST repne scasd jnz .error sub edi, 4 ;----------------------------- ; Add device to the found slot mov [edi], ebx ; add device to list mov eax, edi ; Calculate device number in eax sub eax, NET_DRV_LIST shr eax, 2 inc [NET_RUNNING] ; Indicate that one more network device is up and running cmp eax, 1 ; If it's the first network device, try to set it as default jne @f push eax call NET_set_default pop eax @@: call NET_send_event DEBUGF 1,"Device number: %u\n", eax ret .error: or eax, -1 DEBUGF 2,"Adding network device failed\n" ret ;----------------------------------------------------------------- ; ; NET_set_default ; ; API to set the default interface ; ; IN: Device num in eax ; OUT: Device num in eax, -1 on error ; ;----------------------------------------------------------------- align 4 NET_set_default: DEBUGF 1,"NET_set_default: device=%x\n", eax cmp eax, MAX_NET_DEVICES jae .error cmp [NET_DRV_LIST+eax*4], 0 je .error mov [NET_DEFAULT], eax DEBUGF 1,"NET_set_default: succes\n" ret .error: or eax, -1 DEBUGF 1,"NET_set_default: failed\n" ret ;----------------------------------------------------------------- ; ; NET_Remove_Device: ; ; This function is called by etwork drivers, ; to unregister network devices from the kernel ; ; IN: Pointer to device structure in ebx ; OUT: eax: -1 on error ; ;----------------------------------------------------------------- align 4 NET_remove_device: cmp [NET_RUNNING], 0 je .error cmp [NET_DRV_LIST], ebx jne @f mov [NET_DRV_LIST], 0 cmp [NET_RUNNING], 1 je @f ; there are still active devices, find one and make it default xor eax, eax mov ecx, MAX_NET_DEVICES mov edi, NET_DRV_LIST repe scasd je @f shr edi, 2 dec edi mov [NET_DEFAULT], edi @@: ;---------------------------- ; Find the driver in the list mov eax, ebx mov ecx, MAX_NET_DEVICES mov edi, NET_DRV_LIST+4 repne scasd jnz .error ;------------------------ ; Remove it from the list xor eax, eax mov dword [edi-4], eax call NET_send_event dec [NET_RUNNING] ret .error: or eax, -1 ret ;----------------------------------------------------------------- ; ; NET_ptr_to_num ; ; IN: ebx = ptr to device struct ; OUT: edi = -1 on error, device number otherwise ; ;----------------------------------------------------------------- align 4 NET_ptr_to_num: push ecx mov ecx, MAX_NET_DEVICES mov edi, NET_DRV_LIST .loop: cmp ebx, [edi] jz .found add edi, 4 dec ecx jnz .loop ; repnz scasd could work too if eax is used instead of ebx! or edi, -1 pop ecx ret .found: sub edi, NET_DRV_LIST shr edi, 2 pop ecx ret ;----------------------------------------------------------------- ; ; checksum_1 ; ; This is the first of two functions needed to calculate a checksum. ; ; IN: edx = start offset for semi-checksum ; esi = pointer to data ; ecx = data size ; OUT: edx = semi-checksum ; ; ; Code was optimized by diamond ; ;----------------------------------------------------------------- align 4 checksum_1: shr ecx, 1 pushf jz .no_2 shr ecx, 1 pushf jz .no_4 shr ecx, 1 pushf jz .no_8 .loop: add dl, [esi+1] adc dh, [esi+0] adc dl, [esi+3] adc dh, [esi+2] adc dl, [esi+5] adc dh, [esi+4] adc dl, [esi+7] adc dh, [esi+6] adc edx, 0 add esi, 8 dec ecx jnz .loop adc edx, 0 .no_8: popf jnc .no_4 add dl, [esi+1] adc dh, [esi+0] adc dl, [esi+3] adc dh, [esi+2] adc edx, 0 add esi, 4 .no_4: popf jnc .no_2 add dl, [esi+1] adc dh, [esi+0] adc edx, 0 inc esi inc esi .no_2: popf jnc .end add dh, [esi+0] adc edx, 0 .end: ret ;----------------------------------------------------------------- ; ; checksum_2 ; ; This function calculates the final ip/tcp/udp checksum for you ; ; IN: edx = semi-checksum ; OUT: dx = checksum (in INET byte order) ; ;----------------------------------------------------------------- align 4 checksum_2: mov ecx, edx shr ecx, 16 and edx, 0xffff add edx, ecx mov ecx, edx shr ecx, 16 add dx, cx test dx, dx ; it seems that ZF is not set when CF is set :( not dx jnz .not_zero dec dx .not_zero: xchg dl, dh DEBUGF 1,"Checksum: %x\n", dx ret ;---------------------------------------------------------------- ; ; System function to work with network devices (75) ; ;---------------------------------------------------------------- align 4 sys_network: ; FIXME: make default device easily accessible cmp ebx, -1 jne @f mov eax, [NET_RUNNING] jmp .return @@: cmp bh, MAX_NET_DEVICES ; Check if device number exists jae .doesnt_exist mov esi, ebx and esi, 0x0000ff00 shr esi, 6 cmp dword [esi + NET_DRV_LIST], 0 ; check if driver is running je .doesnt_exist mov eax, [esi + NET_DRV_LIST] and ebx, 0x000000ff cmp ebx, .number ja .doesnt_exist jmp dword [.table + 4*ebx] .table: dd .get_type ; 0 dd .get_dev_name ; 1 dd .reset ; 2 dd .stop ; 3 dd .get_ptr ; 4 dd .get_drv_name ; 5 dd .set_default ; 6 .number = ($ - .table) / 4 - 1 .get_type: ; 0 = Get device type (ethernet/token ring/...) mov eax, [eax + NET_DEVICE.type] jmp .return .get_dev_name: ; 1 = Get device name mov esi, [eax + NET_DEVICE.name] mov edi, ecx mov ecx, 64/4 ; max length rep movsd xor eax, eax jmp .return .reset: ; 2 = Reset the device call [eax + NET_DEVICE.reset] jmp .return .stop: ; 3 = Stop driver for this device call [eax + NET_DEVICE.unload] jmp .return .get_ptr: ; 4 = Get driver pointer jmp .return .get_drv_name: ; 5 = Get driver name xor eax, eax jmp .return .set_default: ; 6 = Set default device call NET_set_default jmp .return .doesnt_exist: mov eax, -1 .return: mov [esp+32], eax ret ;---------------------------------------------------------------- ; ; System function to work with protocols (76) ; ;---------------------------------------------------------------- align 4 sys_protocols: cmp bh, MAX_NET_DEVICES ; Check if device number exists jae .doesnt_exist mov esi, ebx and esi, 0x0000ff00 shr esi, 6 ; now we have the device num * 4 in esi cmp [esi + NET_DRV_LIST], 0 ; check if driver is running je .doesnt_exist push .return ; return address (we will be using jumps instead of calls) mov eax, ebx ; set ax to protocol number shr eax, 16 ; cmp ax, API_ETH je ETH_api cmp ax, API_IPv4 je IPv4_api cmp ax, API_ICMP je ICMP_api cmp ax, API_UDP je UDP_api cmp ax, API_TCP je TCP_api cmp ax, API_ARP je ARP_api cmp ax, API_PPPOE je PPPoE_api cmp ax, API_IPv6 je IPv6_api add esp, 4 ; if we reached here, no function was called, so we need to balance stack .doesnt_exist: mov eax, -1 .return: mov [esp+28+4], eax ; return eax value to the program ret