;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Copyright (C) KolibriOS team 2004-2013. All rights reserved. ;; ;; Distributed under terms of the GNU General Public License ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; 20/11/2013 yogev_ezra: Initial version (Vortex86 SoC type detection) ; 26/11/2013 yogev_ezra: Added CPU speed modifier and MMX support flag detection ; Thanks for help to: dunkaist, eAndrew, hidnplayr, Mario $Revision$ VORTEX86DEBUG = 0 ; For testing in emulators and in non-Vortex86 CPU computers, set this to 1 VORTEX86DEBUGVALUE = 0x35504d44 ; FAKE port output = used for testing ; Detect Vortex86 CPU and generate CPU name in string format (PCI address at 93H~90H in Vortex86 North Bridge contains SoC type) ; Available Vortex86 CPU codes taken from Coreboot project. New codes should be added to "Vortex86SoClist" below ; #define DMP_CPUID_SX 0x31504d44 ("DMP1") ; #define DMP_CPUID_DX 0x32504d44 ("DMP2") ; #define DMP_CPUID_MX 0x33504d44 ("DMP3") ; #define DMP_CPUID_DX2 0x34504d44 ("DMP4") ; #define DMP_CPUID_MX_PLUS 0x35504d44 ("DMP5") ; #define DMP_CPUID_EX 0x37504d44 ("DMP7") iglobal Vortex86CPUcode dd ? ; Vortex86 CPU code in HEX format (4 bytes), can be shown as string if converted to ASCII characters Vortex86CPUid db 0 ; Vortex86 CPU id in integer format (1=Vortex86SX, 2=Vortex86DX, ...) Vortex86SoCname db 'Vortex86 ',0 ; This variable will hold the full name of Vortex86 SoC Vortex86SoClist: ; List of Vortex86 CPUs known today. Add new record to this list when new CPU becomes available db 0x31, 'SX ' ; id=1 db 0x32, 'DX ' ; id=2 db 0x33, 'MX ' ; id=3 MMX is available starting from CPU code 'MX' (id=3) db 0x34, 'DX2' ; id=4 db 0x35, 'MX+' ; id=5 db 0x37, 'EX ' ; id=7 Vortex86SoCnum = ($ - Vortex86SoClist) / 4 ; Calculate the total number of known Vortex86 CPUs endg ; When in debug mode, perform SoC detection regardless of the actual CPU vendor (even for vendors other than DMP) ; When in normal (not debug) mode, check the CPU vendor first, and perform SoC detection only if vendor is 'Vortex86 SoC' if ~ VORTEX86DEBUG cmp [cpu_vendor], 'Vort' jnz .Vortex86end ; If the CPU vendor is not 'Vortex86 SoC', skip the SoC detection end if mov eax, OS_BASE+0x90 ; 0x80000090 = Starting PCI address to read from (32-bit register - accessed as DWORD) call .Vortex86PCIreg ; Get the CPU code from Vortex86 SoC PCI register (Register Offset: 93H~90H) if VORTEX86DEBUG ; When in debug mode, pretend that we received port output equal to "VORTEX86DEBUGVALUE" mov eax, VORTEX86DEBUGVALUE end if DEBUGF 1, "K : Vortex86 SoC type register (93H~90H) returned 0x" test eax, eax ; Check whether the port output was '\0' jz .nullPCIoutput ; In case the result is '\0' (NULL), skip further testing and exit mov [Vortex86CPUcode], eax ; Save HEX CPU code to Vortex86CPUcode (so it can be used later) DEBUGF 1, "%x (%s): ", eax, Vortex86CPUcode ; Print the CPU code (as HEX and as string) to debug log mov ebx, 0x444d5000 ; Apply Vortex86 CPU code mask (all Vortex86 SoC have ID in form of "0xNN504d44") bswap eax ; Assumed it is Vortex86 SoC, the highest byte identifies the exact CPU, so move it to the lowest byte mov bl, al ; Copy SoC type to BL since EAX (that includes AL) is used implicitly in "LODSD" command below cmp eax, ebx ; Now see whether the 3 higher bytes were "0x504d44" (which means it's Vortex86) jnz .notVortex86 ; If it's not Vortex86 - go say so and exit sub al, 0x30 ; Current Vortex86 CPU codes are in the range of 31h-37h, so convert them to integer (1,2,...) mov [Vortex86CPUid], al ; Save the CPUid (1=Vortex86SX, 2=Vortex86DX, ..., 7=Vortex86EX, ...) mov esi, Vortex86SoClist ; ESI points to the start of Vortex86SoClist (used implicitly in "LODSD" command below) xor ecx, ecx ; Zero ECX (it is used as counter) cld ; Clears the DF flag in the EFLAGS register (DF=0 --> String operations increment ESI) @@: inc ecx ; Increment our counter cmp ecx, Vortex86SoCnum ; Check if we iterated Vortex86SoCnum times already (i.e. went over the entire Vortex86SoClist) ja .unknownVortex86 ; If the entire list was tested and our CPU is not in that list, it is unknown Vortex86 SoC lodsd ; Load DWORD at address DS:ESI into EAX (puts 1 line from Vortex86SoClist into EAX, then increments ESI) cmp bl, al ; Check if our CPU matches the current record in the list jne @b ; No match --> repeat with next record shr eax, 8 ; Match found --> drop the SoC type code from Vortex86SoClist name and replace it with \0 mov dword [Vortex86SoCname+8], eax ; Concatenate it with prefix to receive complete SoC name (\0 is string termination) DEBUGF 1, "%s (id=%d)\n", Vortex86SoCname, [Vortex86CPUid]:1 ; Say what we have found (CPU name and id) jmp .Vortex86 .notVortex86: ; In case this register is used by other CPUs for other purpose, it's interesting what it contains DEBUGF 1, "not a Vortex86 CPU\n" jmp .Vortex86end .unknownVortex86: ; It is Vortex86 CPU, but it's not in the list above DEBUGF 1, "unknown Vortex86 CPU (id=%d)\n", [Vortex86CPUid]:1 ; Inform the user that the CPU is Vortex86 but name is unknown .Vortex86: mov eax, OS_BASE+0xA0 ; 0x800000A0 = Starting PCI address to read from (32-bit register - accessed as DWORD) call .Vortex86PCIreg ; Get current flags of Vortex86SoC Host Control Register (Register Offset: A3h~A0h) DEBUGF 1, "K : Vortex86 Host Control Register (A3h~A0h) returned 0x%x: CPU speed is ",eax mov bl, al ; The lower byte of Vortex86 Host Control Register contains CPU speed modifier and MMX support status mov bh, al ; Backup the current AL value, so later we can test whether the value has changed and bl, 00000111b ; CPU speed modifier is stored in bits 0-2. Value=0 means MAX speed, other values - speed reduction jz .Vortex86CPUspeedMAX ; 0s in bits 0-2: CPU is at MAX speed (no need to modify) inc bl ; The actual value is 1 less than 'Divide by' setting (value '001' means 'Divide by 2', etc.) DEBUGF 1, "reduced (divide by %d).\nK : Vortex86 changing CPU speed to ", bl ; Print the current CPU speed modifier to the log and al, 11111000b ; At least one of the bits 0-2 contains 1: CPU is at reduced speed. Set bits 0-2 to 0s to change to MAX .Vortex86CPUspeedMAX: DEBUGF 1, "MAX\n" ; Now the CPU should be running at MAX speed (don't write the value to PCI port yet) cmp [Vortex86CPUid], 3 ; MMX is available starting from CPU code 'MX' (id=3) jb .skipVortex86MMX ; No MMX support - skip MMX support status detection (for id=1,2) DEBUGF 1, "K : Vortex86 MMX support status: MMX is " ; Bits 5-6 in Host Control Register contain MMX status test al, 100000b ; On MMX-capable Vortex86 SoC, Bit5 = is MMX enabled? (1=Yes/0=No) jnz .Vortex86MMXenabled ; MMX is already enabled (Bit5=1) DEBUGF 1, "DISABLED - enabling it for this session\n" ; Print to the log that MMX is disabled or al, 100000b ; Enable MMX support (don't write the value to PCI port yet) jmp .AfterMMXenabled .Vortex86MMXenabled: DEBUGF 1, "ENABLED\n" ; Print to the log that MMX is enabled .AfterMMXenabled: DEBUGF 1, "K : Vortex86 MMX report to CPUID: " ; Print to the log what CPUID command knowns about MMX support test al, 1000000b ; On MMX-capable Vortex86 SoC, Bit6 = report MMX support to CPUID? (1=Yes/0=No) jnz .Vortex86MMXreported ; MMX is already reported to CPUID (Bit6=1) DEBUGF 1, "OFF - turning it ON for this session\n" ; Print to the log that MMX will now be reported to CPUID or al, 1000000b ; Turn on MMX reporting to CPUID (don't write the value to PCI port yet) jmp .skipVortex86MMX .Vortex86MMXreported: DEBUGF 1, "ON\n" ; Print to the log that MMX reporting to CPUID is enabled .skipVortex86MMX: cmp bh, al ; Check whether AL has changed before (if it did, we need to write it back to PCI port) jz .Vortex86end ; No change - no need to write to the port out dx, al ; Write the changed data to PCI port DEBUGF 1, "K : Vortex86 Host Control Register (A3h~A0h) new value is 0x%x\n",eax jmp .Vortex86end .Vortex86PCIreg: ; Procedure receives input register value in EAX, and returns the output value also in EAX mov dx, 0xcf8 ; CF8h = Vortex86 PCI Configuration Address port out dx, eax ; Send request to PCI address port to retrieve data from this address mov dl, 0xfc ; CFCh = Vortex86 PCI Configuration Data port in eax, dx ; Read data from PCI data port ret .nullPCIoutput: ; Emulators and non-Vortex86 CPU computers will usually return \0 in this register DEBUGF 1, "0 (NULL)\n" .Vortex86end: