kolibrios/programs/other/outdated/clip/trunk/clip_en.txt
Kirill Lipatov (Leency) 31410fbdb3 bigger fonts in docpack; move /system/clip to /other/outdated/
git-svn-id: svn://kolibrios.org@6267 a494cfbc-eb01-0410-851d-a64ba20cac60
2016-02-20 17:21:34 +00:00

141 lines
5.0 KiB
Plaintext
Raw Permalink Blame History

Global clipboard for Kolibri. Notes for developers.
General info
Clipboard is implemented using daemon process and IPC messages.
To test, run @clip (the daemon process) and cliptest and debug board
or test2 (several instances).
1. @clip daemon and its commands
Process @clip creates no windows, but only listens for IPC messages.
Daemon supports 16 (MAX_FORMAT) buffers for different data types and up to
16,7 Mb (MAX_SIZE) data in each buffer (memory is allocated from heap).
Data format ID is a number from 0 to 65534. Value 65535 is reserved.
When the daemon is started it terminates all other @clip instances.
Format of daemon's commands is following:
[ Cmd: word | Format: word | Reserved: Dword | Data: ...]
where Cmd is command id,
Format is data format id,
Reserved is unused (should be zero),
and Data is command-specific data.
Following commands are implemented:
1. Set Size. Define required size for buffer. This command causes daemon to
enlarge (if needed) its IPC buffer (there is currently no way to decrease
size of the buffer).
Data parameter: Dword with size of the data.
Command length: 12 bytes.
2. Set. Data transfer. This command copies data to daemon's memory.
Data parameter: data to be copied.
Command length: 8 + (data size) bytes.
3. Get Size. Get size of data with specified format id. This command causes
daemon to send in reply an IPC message telling the size of the data in the buffer.
If the buffer contains no data, 0 is returned.
Command length: 8 bytes.
4. Get. Get the data with specified format id from the buffer. This command
causes daemon to send in reply an IPC message of required size with the data
from the buffer. If the buffer contains no data, no message is sent.
Command length: 8 bytes.
5. Delete. Clear the buffer for specified format id. If 0xFFFF is specified,
all buffers are cleared.
Command length: 8 bytes.
Source: @clip.asm. Uncomment the line:
;define DEBUG TRUE
and comment the next one to enable output on debug board. This is useful
for bugtracking.
DEFAULT_SIZE is initial IPC buffer size
MAX_SIZE is upper limit of IPC buffer size
MAX_FORMAT is number of formats daemon can store as the same time
(if more formats are copied, daemon will crash).
DELAY is pause between sending attepmts, 1/100 seconds.
ATTEMPT is number of sending attempts if target process is not ready.
2. clip.inc: function set for high-level communication with @clip.
Reading and writing is implemeted.
Usage example: cliptest.asm (writes to debug board) and test2.asm.
Following values should be defined:
DEFAULT_MASK = 7 ; Default event mask for current thread
SEND_DELAY = 10 ; pause between sending attempts
RECV_DELAY = 100 ; how much to wait for the answer
; 1/100 secs
ATTEMPT = 5 ; number of sending attempts
Clip.inc contains the following functions:
clipboard_init() - search of process @clip. May be called several times.
Returns 1 if successful and 0 if failed.
clipboard_write(esi points to CLIP_BUFFER,
ax (word) - data format id) - copies data to buffer.
Uses 1-th and 2-nd commands.
Returns 1 if successful and 0 if failed.
clipboard_read(esi points to CLIP_BUFFER,
ax (word) - data format id) - retrieves data from buffer.
Uses 3-rd and 4-th commands.
Returns 1 if successful, -1 if not enough data in receive buffer (which is
left unchanged in this case) and 0 if failed.
If eax = 1 or -1, edx contains real size of data in the buffer.
Warning. If the application uses incoming IPC messages for other
purposes, process daemon's messages manually, because getting a different
format message will be ignored by clipboard_read.
There are 2 low-level functions which may be called after clipboard_init:
_ipc_send (esi points to a common buffer, edx - byte count).
Sends an IPC message to daemon. The difference between this function and
function 60/2 is that _ipc_send makes several attempts if daemon is
unaccessible, with pause of SEND_DELAY/100 seconds.
Returns 1 if successful and 0 if failed.
_ipc_recv(esi points to CLIP_BUFFER (<28><>. <20><><EFBFBD><EFBFBD><EFBFBD>),
edx = default event mask).
Waits for an IPC message for RECV_DELAY/100 seconds.
If successful, result is stored in esi.
Returns 1 if successful and 0 if failed.
Format of buffer for clipboard:
CLIP_BUFFER
(+0) .size dd ? ; size of the buffer itself(N)
; if you need to send less bytes that N
; temporarily write the required size here
(+4) .sys1 dd ? ; \ clip.inc uses these fields
; - for internal values. You should not
(+8) .sys2 dd ? ; / modify them
(+12) .data db N dup(?); buffer itself
Good luck in programming and debugging!
; barsuk, 21.08.2008
@CLIP version 0.2.
A capability of inserting text to applications not using @clip is added.
Function 72/1 is used to insert the text.
Only applications, using ascii mode for input are supported.
To insert text press ctrl-alt-v hot key.
The text should be copied to 1-st buffer from @clip-compatible
application (example: test2).
; 08.09.2008