badpork/kolibrios
1
0
Fork 0
forked from KolibriOS/kolibrios
Code Pull Requests Activity
0087c20d62
kolibrios/kernel/branches/net/drivers/sis900.asm
hidnplayr 8a7ebf6b32 fix in ARPcfg application 
added pci ids of dec21x4x cards to netcfg
bugfixes in dex21x4x driver, pcnet32 driver, rtl8139 driver and sis900 driver
new network program (ICMP) to ping computers, uses new RAW socket code (experimental)

git-svn-id: svn://kolibrios.org@1541 a494cfbc-eb01-0410-851d-a64ba20cac60
2010-07-30 21:54:27 +00:00

1307 lines
32 KiB
NASM
Raw Blame History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2010. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; Ethernet driver for KolibriOS ;;
;; This is an adaptation of MenuetOS driver with minimal changes. ;;
;; Changes were made by CleverMouse. Original copyright follows. ;;
;; ;;
;; This driver is based on the SIS900 driver from ;;
;; the etherboot 5.0.6 project. The copyright statement is ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;; remaining parts Copyright 2004 Jason Delozier, ;;
;; cordata51@hotmail.com ;;
;; ;;
;; See file COPYING for details ;;
;; ;;
;; Updates: ;;
;; Revision Look up table and SIS635 Mac Address by Jarek Pelczar ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
format MS COFF
API_VERSION equ 0x01000100
DRIVER_VERSION equ 5
MAX_DEVICES equ 16
DEBUG equ 1
__DEBUG__ equ 1
__DEBUG_LEVEL__ equ 1
include 'proc32.inc'
include 'imports.inc'
include 'fdo.inc'
include 'netdrv.inc'
public START
public version
NUM_RX_DESC equ 4 ;* Number of RX descriptors *
NUM_TX_DESC equ 1 ;* Number of TX descriptors *
RX_BUFF_SZ equ 1520 ;* Buffer size for each Rx buffer *
TX_BUFF_SZ equ 1516 ;* Buffer size for each Tx buffer *
MAX_ETH_FRAME_SIZE equ 1516
virtual at ebx
device:
ETH_DEVICE
.io_addr dd ?
.pci_bus db ?
.pci_dev db ?
.irq_line db ?
.cur_rx db ?
.cur_tx db ?
.last_tx db ?
.pci_revision db ?
.table_entries db ?
dw ? ; align 4
.special_func dd ?
.txd rd (4 * NUM_TX_DESC)
.rxd rd (4 * NUM_RX_DESC)
.size = $ - device
end virtual
macro ee_delay {
push eax
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
in eax, dx
pop eax
}
section '.flat' code readable align 16
; Driver entry point - register our service when the driver is loading.
; TODO: add needed operations when unloading
START:
cmp dword [esp+4], 1
jne .exit
stdcall RegService, my_service, service_proc
ret 4
.exit:
xor eax, eax
ret 4
; Service procedure for the driver - handle all I/O requests for the driver.
; Currently handled requests are: SRV_GETVERSION = 0 and SRV_HOOK = 1.
service_proc:
; 1. Get parameter from the stack: [esp+4] is the first parameter,
; pointer to IOCTL structure.
mov edx, [esp+4] ; edx -> IOCTL
; 2. Get request code and select a handler for the code.
mov eax, [IOCTL.io_code]
test eax, eax ; check for SRV_GETVERSION
jnz @f
; 3. This is SRV_GETVERSION request, no input, 4 bytes output, API_VERSION.
; 3a. Output size must be at least 4 bytes.
cmp [IOCTL.out_size], 4
jl .fail
; 3b. Write result to the output buffer.
mov eax, [IOCTL.output]
mov [eax], dword API_VERSION
; 3c. Return success.
xor eax, eax
ret 4
@@:
dec eax ; check for SRV_HOOK
jnz .fail
; 4. This is SRV_HOOK request, input defines the device to hook, no output.
; 4a. The driver works only with PCI devices,
; so input must be at least 3 bytes long.
cmp [IOCTL.inp_size], 3
jl .fail
; 4b. First byte of input is bus type, 1 stands for PCI.
mov eax, [IOCTL.input]
cmp byte [eax], 1
jne .fail
; 4c. Second and third bytes of the input define the device: bus and dev.
; Word in bx holds both bytes.
mov bx, [eax+1]
; 4d. Check if the device was already hooked,
; scan through the list of known devices.
; check if the device is already listed
mov esi, device_list
mov ecx, [devices]
test ecx, ecx
jz .firstdevice
; mov eax, [IOCTL.input] ; get the pci bus and device numbers
mov ax , [eax+1] ;
.nextdevice:
mov ebx, [esi]
cmp ax , word [device.pci_bus] ; compare with pci and device num in device list (notice the usage of word instead of byte)
je .find_devicenum ; Device is already loaded, let's find it's device number
add esi, 4
loop .nextdevice
; 4e. This device doesn't have its own eth_device structure yet, let's create one
.firstdevice:
; 4f. Check that we have place for new device.
cmp [devices], MAX_DEVICES
jge .fail
; 4g. Allocate memory for device descriptor and receive+transmit buffers.
stdcall KernelAlloc, device.size
test eax, eax
jz .fail
; 4h. Zero the structure.
mov edi, eax
mov ecx, (device.size + 3) shr 2
xor eax, eax
rep stosd
; 4i. Save PCI coordinates
mov eax, [IOCTL.input]
mov cl , [eax+1]
mov [device.pci_bus], cl
mov cl , [eax+2]
mov [device.pci_dev], cl
; 4j. Fill in the direct call addresses into the struct.
; Note that get_MAC pointer is filled in initialization by probe.
mov [device.reset], init
mov [device.transmit], transmit
; mov [device.get_MAC], read_mac
mov [device.set_MAC], write_mac
mov [device.unload], unload
mov [device.name], my_service
; 4k. Now, it's time to find the base io addres of the PCI device
; TODO: implement check if bus and dev exist on this machine
; Now, it's time to find the base io addres of the PCI device
find_io [device.pci_bus], [device.pci_dev], [device.io_addr]
; We've found the io address, find IRQ now
find_irq [device.pci_bus], [device.pci_dev], [device.irq_line]
; 4m. Add new device to the list (required for int_handler).
mov eax, [devices]
mov [device_list+4*eax], ebx
inc [devices]
; 4m. Ok, the eth_device structure is ready, let's probe the device
call probe
test eax, eax
jnz .destroy
; 4n. If device was successfully initialized, register it for the kernel.
mov [device.type], NET_TYPE_ETH
call NetRegDev
cmp eax, -1
je .destroy
ret 4
; 5. If the device was already loaded, find the device number and return it in eax
.find_devicenum:
mov ebx, eax
call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx
; into a device number in edi
mov eax, edi ; Application wants it in eax instead
ret 4
; If an error occured, remove all allocated data and exit (returning -1 in eax)
.destroy:
dec [devices]
; todo: reset device into virgin state
.err:
stdcall KernelFree, ebx
.fail:
xor eax, eax
ret 4
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
;; ;;
;; Actual Hardware dependent code starts here ;;
;; ;;
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
unload:
; TODO: (in this particular order)
;
; - Stop the device
; - Detach int handler
; - Remove device from local list
; - call unregister function in kernel
; - Remove all allocated structures and buffers the card used
or eax,-1
ret
;********************************************************************
; Comments:
; Known to work with the following SIS900 ethernet cards:
; - Device ID: 0x0900 Vendor ID: 0x1039 Revision: 0x91
; - Device ID: 0x0900 Vendor ID: 0x1039 Revision: 0x90
;
; If your card is not listed, try it and let me know if it
; functions properly and it will be aded to the list. If not
; we may be able to add support for it.
;
; ToDo:
; - Enable MII interface for reading speed
; and duplex settings.
; - Update receive routine to support packet fragmentation.
; - Add additional support for other sis900 based cards
;
;********************************************************************
ETH_ALEN equ 6 ; Size of Ethernet address
ETH_HLEN equ 14 ; Size of ethernet header
ETH_ZLEN equ 60 ; Minimum packet length
DSIZE equ 0x00000fff
CRC_SIZE equ 4
RFADDR_shift equ 16
; Symbolic offsets to registers.
cr equ 0x0 ; Command Register
cfg equ 0x4 ; Configuration Register
mear equ 0x8 ; EEPROM Access Register
ptscr equ 0xc ; PCI Test Control Register
isr equ 0x10 ; Interrupt Status Register
imr equ 0x14 ; Interrupt Mask Register
ier equ 0x18 ; Interrupt Enable Register
epar equ 0x18 ; Enhanced PHY Access Register
txdp equ 0x20 ; Transmit Descriptor Pointer Register
txcfg equ 0x24 ; Transmit Configuration Register
rxdp equ 0x30 ; Receive Descriptor Pointer Register
rxcfg equ 0x34 ; Receive Configuration Register
flctrl equ 0x38 ; Flow Control Register
rxlen equ 0x3c ; Receive Packet Length Register
rfcr equ 0x48 ; Receive Filter Control Register
rfdr equ 0x4C ; Receive Filter Data Register
pmctrl equ 0xB0 ; Power Management Control Register
pmer equ 0xB4 ; Power Management Wake-up Event Register
; Command Register Bits
RELOAD equ 0x00000400
ACCESSMODE equ 0x00000200
RESET equ 0x00000100
SWI equ 0x00000080
RxRESET equ 0x00000020
TxRESET equ 0x00000010
RxDIS equ 0x00000008
RxENA equ 0x00000004
TxDIS equ 0x00000002
TxENA equ 0x00000001
; Configuration Register Bits
DESCRFMT equ 0x00000100 ; 7016 specific
REQALG equ 0x00000080
SB equ 0x00000040
POW equ 0x00000020
EXD equ 0x00000010
PESEL equ 0x00000008
LPM equ 0x00000004
BEM equ 0x00000001
RND_CNT equ 0x00000400
FAIR_BACKOFF equ 0x00000200
EDB_MASTER_EN equ 0x00002000
; Eeprom Access Reigster Bits
MDC equ 0x00000040
MDDIR equ 0x00000020
MDIO equ 0x00000010 ; 7016 specific
EECS equ 0x00000008
EECLK equ 0x00000004
EEDO equ 0x00000002
EEDI equ 0x00000001
; TX Configuration Register Bits
ATP equ 0x10000000 ;Automatic Transmit Padding
MLB equ 0x20000000 ;Mac Loopback Enable
HBI equ 0x40000000 ;HeartBeat Ignore (Req for full-dup)
CSI equ 0x80000000 ;CarrierSenseIgnore (Req for full-du
; RX Configuration Register Bits
AJAB equ 0x08000000 ;
ATX equ 0x10000000 ;Accept Transmit Packets
ARP equ 0x40000000 ;accept runt packets (<64bytes)
AEP equ 0x80000000 ;accept error packets
; Interrupt Reigster Bits
WKEVT equ 0x10000000
TxPAUSEEND equ 0x08000000
TxPAUSE equ 0x04000000
TxRCMP equ 0x02000000
RxRCMP equ 0x01000000
DPERR equ 0x00800000
SSERR equ 0x00400000
RMABT equ 0x00200000
RTABT equ 0x00100000
RxSOVR equ 0x00010000
HIBERR equ 0x00008000
SWINT equ 0x00001000
MIBINT equ 0x00000800
TxURN equ 0x00000400
TxIDLE equ 0x00000200
TxERR equ 0x00000100
TxDESC equ 0x00000080
TxOK equ 0x00000040
RxORN equ 0x00000020
RxIDLE equ 0x00000010
RxEARLY equ 0x00000008
RxERR equ 0x00000004
RxDESC equ 0x00000002
RxOK equ 0x00000001
; Interrupt Enable Register Bits
IE equ RxOK + TxOK
; Revision ID
SIS900B_900_REV equ 0x03
SIS630A_900_REV equ 0x80
SIS630E_900_REV equ 0x81
SIS630S_900_REV equ 0x82
SIS630EA1_900_REV equ 0x83
SIS630ET_900_REV equ 0x84
SIS635A_900_REV equ 0x90
SIS900_960_REV equ 0x91
; Receive Filter Control Register Bits
RFEN equ 0x80000000
RFAAB equ 0x40000000
RFAAM equ 0x20000000
RFAAP equ 0x10000000
RFPromiscuous equ 0x70000000
; Reveive Filter Data Mask
RFDAT equ 0x0000FFFF
; Eeprom Address
EEPROMSignature equ 0x00
EEPROMVendorID equ 0x02
EEPROMDeviceID equ 0x03
EEPROMMACAddr equ 0x08
EEPROMChecksum equ 0x0b
;The EEPROM commands include the alway-set leading bit.
EEread equ 0x0180
EEwrite equ 0x0140
EEerase equ 0x01C0
EEwriteEnable equ 0x0130
EEwriteDisable equ 0x0100
EEeraseAll equ 0x0120
EEwriteAll equ 0x0110
EEaddrMask equ 0x013F
EEcmdShift equ 16
;For SiS962 or SiS963, request the eeprom software access
EEREQ equ 0x00000400
EEDONE equ 0x00000200
EEGNT equ 0x00000100
;***************************************************************************
;
; probe
;
; Searches for an ethernet card, enables it and clears the rx buffer
;
; TODO: probe mii transceivers
;
;***************************************************************************
align 4
probe:
stdcall PciWrite8, dword [device.pci_bus], dword [device.pci_dev], 0x40, 0 ; Wake Up Chip
make_bus_master [device.pci_bus], [device.pci_dev]
; Get Card Revision
stdcall PciRead8, dword [device.pci_bus], dword [device.pci_dev], 0x08
mov [pci_revision], al ; save the revision for later use
; Look up through the specific_table
mov esi, specific_table
.loop:
cmp dword [esi], 0 ; Check if we reached end of the list
je .error
cmp al, [esi] ; Check if revision is OK
je .ok
add esi, 12 ; Advance to next entry
jmp .loop
.error:
DEBUGF 1, "Device not supported!\n"
or eax, -1
ret
; Find Get Mac Function
.ok:
mov eax, [esi+4] ; Get pointer to "get MAC" function
mov [get_mac_func], eax
mov eax, [esi+8] ; Get pointer to special initialization fn
mov [special_func], eax
; Get MAC
call [get_mac_func]
; Call special initialization fn if requested
cmp [special_func],0
je @f
call [special_func]
@@:
; Set table entries
mov byte [table_entries], 16
cmp [pci_revision], SIS635A_900_REV
jae @f
cmp [pci_revision], SIS900B_900_REV
je @f
mov byte [table_entries], 8
@@:
; TODO: Probe for mii transceiver
;***************************************************************************
;
; init
;
; resets the ethernet controller chip and various
; data structures required for sending and receiving packets.
;
;***************************************************************************
align 4
init:
call reset
call init_rxfilter
call init_txd
call init_rxd
call set_rx_mode
call set_tx_mode
;call check_mode
; enable interrupts on packet receive
xor eax, eax
inc eax ; eax = 1 = RxOK
set_io 0
set_io imr
out dx, eax
; globally enable interrupts
set_io ier
out dx, eax ; eax is still 1
xor eax, eax
mov [device.mtu], 1514
ret
;***************************************************************************
;
; reset
;
; disables interrupts and soft resets the controller chip
;
;***************************************************************************
align 4
reset:
movzx eax, [device.irq_line]
stdcall AttachIntHandler, eax, int_handler, 0
;--------------------------------------------
; Disable Interrupts and reset Receive Filter
set_io 0
set_io ier
xor eax, eax
out dx, eax
set_io imr
out dx, eax
set_io rfcr
out dx, eax
;-----------
; Reset Card
set_io cr
in eax, dx ; Get current Command Register
or eax, RESET + RxRESET + TxRESET ; set flags
out dx, eax ; Write new Command Register
;----------
; Wait loop
set_io isr
mov ecx, 1000
.loop:
dec ecx
jz .error
in eax, dx ; move interrup status to eax
cmp eax, 0x03000000
jne .loop
;------------------------------------------------------
; Set Configuration Register depending on Card Revision
set_io cfg
mov eax, PESEL ; Configuration Register Bit
cmp [pci_revision], SIS635A_900_REV
je .match
cmp [pci_revision], SIS900B_900_REV ; Check card revision
je .match
out dx, eax ; no revision match
jmp .done
.match: ; Revision match
or eax, RND_CNT ; Configuration Register Bit
out dx, eax
.done:
xor eax, eax
ret
.error:
DEBUGF 1, "Reset failed!\n"
or eax, -1
ret
;***************************************************************************
;
; sis_init_rxfilter
;
; sets receive filter address to our MAC address
;
;***************************************************************************
align 4
init_rxfilter:
;------------------------------------
; Get Receive Filter Control Register
set_io 0
set_io rfcr
in eax, dx
push eax
;-----------------------------------------------
; disable packet filtering before setting filter
and eax, not RFEN
out dx, eax
;--------------------------------------
; load MAC addr to filter data register
xor ecx, ecx
RXINT_Mac_Write: ; high word of eax tells card which mac byte to write
mov eax, ecx
set_io 0
set_io rfcr
shl eax, 16 ;
out dx, eax ;
set_io rfdr
mov ax, word [device.mac+ecx*2] ; Get Mac ID word
out dx, ax ; Send Mac ID
inc cl ; send next word
cmp cl, 3 ; more to send?
jne RXINT_Mac_Write
;------------------------
; enable packet filtering
pop eax ;old register value
set_io rfcr
or eax, RFEN ;enable filtering
out dx, eax ;set register
ret
;***************************************************************************
;
; init_txd
;
; initializes the Tx descriptor
;
;***************************************************************************
align 4
init_txd:
;-------------------------
; initialize TX descriptor
mov dword [device.txd], 0 ; put link to next descriptor in link field
mov dword [device.txd+4], 0 ; clear status field
mov dword [device.txd+8], 0 ; ptr to buffer
;----------------------------------
; load Transmit Descriptor Register
set_io 0
set_io txdp ; TX Descriptor Pointer
lea eax, [device.txd]
GetRealAddr
out dx, eax ; move the pointer
ret
;***************************************************************************
;
; init_rxd
;
; initializes the Rx descriptor ring
;
;***************************************************************************
align 4
init_rxd:
; init RX descriptors
mov ecx, NUM_RX_DESC
lea esi, [device.rxd]
.loop:
lea eax, [esi + 16]
GetRealAddr
mov dword [esi+0], eax
mov dword [esi+4], RX_BUFF_SZ
stdcall KernelAlloc, RX_BUFF_SZ
test eax, eax
jz .fail
mov dword [esi+12], eax
GetRealAddr
mov dword [esi+8], eax
add esi, 16
loop .loop
lea eax, [device.rxd]
GetRealAddr
mov dword [esi - 16], eax ; correct last descriptor link ptr
; And output ptr to first desc, to device
set_io 0
set_io rxdp
out dx, eax
mov [device.cur_rx], 0 ; Set curent rx discriptor to 0
.fail: ;;; TODO: abort instead!
ret
;***************************************************************************
;
; set_tx_mode
;
; sets the transmit mode to allow for full duplex
;
; If you are having problems transmitting packet try changing the
; Max DMA Burst, Possible settings are as follows:
;
; 0x00000000 = 512 bytes
; 0x00100000 = 4 bytes
; 0x00200000 = 8 bytes
; 0x00300000 = 16 bytes
; 0x00400000 = 32 bytes
; 0x00500000 = 64 bytes
; 0x00600000 = 128 bytes
; 0x00700000 = 256 bytes
;
;***************************************************************************
align 4
set_tx_mode:
set_io 0
set_io cr
in eax, dx ; Get current Command Register
or eax, TxENA ; Enable Receive
out dx, eax
set_io txcfg ; Transmit config Register offset
mov eax, ATP + HBI + CSI +0x00600120
; allow automatic padding
; allow heartbeat ignore
; allow carrier sense ignore
; Max DMA Burst (128 bytes)
; TX Fill Threshold
; TX Drain Threshold
out dx, eax
ret
;***************************************************************************
;
; set_rx_mode
;
; sets the receive mode to accept all broadcast packets and packets
; with our MAC address, and reject all multicast packets. Also allows
; full-duplex
;
; If you are having problems receiving packet try changing the
; Max DMA Burst, Possible settings are as follows:
;
; 0x00000000 = 512 bytes
; 0x00100000 = 4 bytes
; 0x00200000 = 8 bytes
; 0x00300000 = 16 bytes
; 0x00400000 = 32 bytes
; 0x00500000 = 64 bytes
; 0x00600000 = 128 bytes
; 0x00700000 = 256 bytes
;
;***************************************************************************
align 4
set_rx_mode:
;----------------------------------------------
; update Multicast Hash Table in Receive Filter
xor cl, cl
.loop:
set_io 0
set_io rfcr ; Receive Filter Control Reg offset
mov eax, 4 ; determine table entry
add al, cl
shl eax, 16
out dx, eax ; tell card which entry to modify
set_io rfdr ; Receive Filter Control Reg offset
mov eax, 0xffff ; entry value
out dx, ax ; write value to table in card
inc cl ; next entry
cmp cl, [table_entries]
jl .loop
;------------------------------------
; Set Receive Filter Control Register
set_io rfcr ; Receive Filter Control Register offset
mov eax, RFAAB + RFAAM + RFAAP + RFEN
; accecpt all broadcast packets
; accept all multicast packets
; Accept all packets
; enable receiver filter
out dx, eax
;----------------
; Enable Receiver
set_io cr
in eax, dx ; Get current Command Register
or eax, RxENA ; Enable Receive
out dx, eax
;-------------------
; Configure Receiver
set_io rxcfg ; Receive Config Register offset
mov eax, ATX + 0x00600002
; Accept Transmit Packets
; (Req for full-duplex and PMD Loopback)
; Max DMA Burst
; RX Drain Threshold, 8X8 bytes or 64bytes
out dx, eax
ret
;***************************************************************************
;
; SIS960_get_mac_addr: - Get MAC address for SiS962 or SiS963 model
;
; SiS962 or SiS963 model, use EEPROM to store MAC address.
; EEPROM is shared by LAN and 1394.
; When access EEPROM, send EEREQ signal to hardware first, and wait for EEGNT.
; If EEGNT is ON, EEPROM is permitted to be accessed by LAN, otherwise is not.
; After MAC address is read from EEPROM, send
; EEDONE signal to refuse EEPROM access by LAN.
; The EEPROM map of SiS962 or SiS963 is different to SiS900.
; The signature field in SiS962 or SiS963 spec is meaningless.
;
; Return 0 is EAX = failure
;
;***************************************************************************
align 4
SIS960_get_mac_addr:
;-------------------------------
; Send Request for eeprom access
set_io 0
set_io mear ; Eeprom access register
mov eax, EEREQ ; Request access to eeprom
out dx, eax ; Send request
;-----------------------------------------------------
; Loop 4000 times and if access not granted, error out
mov ecx, 4000
.loop:
in eax, dx ; get eeprom status
test eax, EEGNT ; see if eeprom access granted flag is set
jnz .got_access ; if it is, go access the eeprom
loop .loop ; else keep waiting
DEBUGF 1, "Access to EEprom failed!\n", 0
set_io mear ; Eeprom access register
mov eax, EEDONE ; tell eeprom we are done
out dx, eax
or eax, -1 ; error
ret
.got_access:
;------------------------------------------
; EEprom access granted, read MAC from card
; zero based so 3-16 bit reads will take place
mov ecx, 2
.read_loop:
mov eax, EEPROMMACAddr ; Base Mac Address
add eax, ecx ; Current Mac Byte Offset
push ecx
call read_eeprom ; try to read 16 bits
pop ecx
mov word [device.mac+ecx*2], ax ; save 16 bits to the MAC ID varible
dec ecx ; one less word to read
jns .read_loop ; if more read more
mov eax, 1 ; return non-zero indicating success
DEBUGF 2,"%x-%x-%x-%x-%x-%x\n",[device.mac]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2
;-------------------------------------
; Tell EEPROM We are Done Accessing It
.done:
set_io 0
set_io mear ; Eeprom access register
mov eax, EEDONE ; tell eeprom we are done
out dx, eax
xor eax, eax ; ok
ret
;***************************************************************************
;
; get_mac_addr: - Get MAC address for stand alone SiS900 model
;
; Older SiS900 and friends, use EEPROM to store MAC address.
;
;***************************************************************************
align 4
get_mac_addr:
;------------------------------------
; check to see if we have sane EEPROM
mov eax, EEPROMSignature ; Base Eeprom Signature
call read_eeprom ; try to read 16 bits
cmp ax, 0xffff
je .err
test ax, ax
je .err
;-----------
; Read MacID
; zero based so 3-16 bit reads will take place
mov ecx, 2
.loop:
mov eax, EEPROMMACAddr ;Base Mac Address
add eax, ecx ;Current Mac Byte Offset
push ecx
call read_eeprom ;try to read 16 bits
pop ecx
mov word [device.mac+ecx*2], ax ;save 16 bits to the MAC ID storage
dec ecx ;one less word to read
jns mac_read_loop ;if more read more
DEBUGF 2,"%x-%x-%x-%x-%x-%x\n",[device.mac]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2
xor eax, eax
ret
.err:
DEBUGF 1, "Access to EEprom failed!\n", 0
or eax, -1
ret
;***************************************************************************
;
; Get_Mac_SIS635_900_REV: - Get MAC address for model 635
;
;***************************************************************************
align 4
Get_Mac_SIS635_900_REV:
set_io 0
set_io rfcr
in eax, dx
mov edi, eax ; EDI=rfcrSave
set_io cr
or eax, RELOAD
out dx, eax
xor eax, eax
out dx, eax
;-----------------------------------------------
; Disable packet filtering before setting filter
set_io rfcr
mov eax, edi
and edi, not RFEN
out dx, eax
;---------------------------------
; Load MAC to filter data register
mov ecx, 3
lea edi, [device.mac]
.loop:
set_io 0
set_io rfcr
mov eax, ecx
shl eax, RFADDR_shift
out dx, eax
set_io rfdr
in eax, dx
stosw
loop .loop
;------------------------
; Enable packet filtering
; set_io rfcr
; mov eax, edi
; or eax, RFEN
; out dx, eax
xor eax, eax
ret
;***************************************************************************
;
; read_eeprom
;
; reads and returns a given location from EEPROM
;
; IN: si = addr
; OUT: ax = data
;
;***************************************************************************
align 4
read_eeprom:
set_io 0
set_io mear
xor eax, eax ; start send
out dx, eax
ee_delay
or eax, EECLK
out dx, eax
ee_delay
;------------------------------------
; Send the read command
or esi, EEread
mov ecx, 1 shl 9
.loop:
mov eax, EECS
test esi, ecx
jz @f
or eax, EEDI
@@:
out dx, eax
ee_delay
or eax, EECLK
out dx, eax
ee_delay
shr esi, 1
jnc .loop
mov eax, EECS
out dx, eax
ee_delay
;------------------------
; Read 16-bits of data in
xor esi, esi
mov cx, 16
.loop2:
mov eax, EECS
out dx, eax
ee_delay
or eax, EECLK
out dx, eax
ee_delay
in eax, dx
shl esi, 1
test eax, EEDO
jz @f
inc esi
@@:
loop .loop2
;----------------------------
; Terminate the EEPROM access
xor eax, eax
out dx, eax
ee_delay
mov eax, EECLK
out dx, eax
ee_delay
movzx eax, si
ret
align 4
write_mac:
DEBUGF 1,'Setting MAC is not supported for SIS900 card.\n'
add esp, 6
ret
;***************************************************************************
;
; int_handler
;
; handles received IRQs, which signal received packets
;
; Currently only supports one descriptor per packet, if packet is fragmented
; between multiple descriptors you will lose part of the packet
;
;***************************************************************************
align 4
int_handler:
; find pointer of device which made IRQ occur
mov esi, device_list
mov ecx, [devices]
test ecx, ecx
jz .nothing
.nextdevice:
mov ebx, [esi]
set_io 0
set_io isr
in eax, dx ; note that this clears all interrupts
test ax, IE
jnz .got_it
loop .nextdevice
.nothing:
ret
.got_it:
test ax, RxOK
jz .no_rx
push ax
;-----------
; Get Status
movzx eax, [device.cur_rx] ; find current discriptor
shl eax, 4 ; * 16
mov ecx, dword[device.rxd+eax+4] ; get receive status
;-------------------------------------------
; Check RX_Status to see if packet is waiting
test ecx, 0x80000000
jnz .is_packet
ret
;----------------------------------------------
; There is a packet waiting check it for errors
.is_packet:
test ecx, 0x67C0000 ; see if there are any errors
jnz .error_status
;---------------------
; Check size of packet
and ecx, DSIZE ; get packet size minus CRC
sub ecx, CRC_SIZE ; make sure packet contains data
jle .error_size
; update statistics
inc dword [device.packets_rx]
add dword [device.bytes_rx], ecx
adc dword [device.bytes_rx+4], 0
push ebx
push .return
push ecx ; packet size
push [device.rxd+eax+12] ; packet ptr
DEBUGF 1, "Packet received OK\n"
jmp EthReceiver
.return:
pop ebx
; Reset status, allow ethernet card access to descriptor
movzx ecx, [device.cur_rx]
shl ecx, 4 ; *16
mov ecx, [device.rxd+ecx]
stdcall KernelAlloc, RX_BUFF_SZ
test eax, eax
jz .fail
mov dword [ecx+12], eax
GetRealAddr
mov dword [ecx+8], eax
mov dword [ecx+4], RX_BUFF_SZ
inc [device.cur_rx] ; get next descriptor
and [device.cur_rx], NUM_RX_DESC-1 ; only 4 descriptors 0-3
; Enable Receiver
set_io 0
set_io cr ; Command Register offset
in eax, dx ; Get current Command Register
or eax, RxENA ; Enable Receiver
out dx, eax
pop ax
jmp .no_rx
.error_status:
DEBUGF 1, "Packet error: %x\n", ecx
jmp .continue
.error_size:
DEBUGF 1, "Packet too large/small\n"
jmp .continue
.no_rx:
test ax, TxOk
jz .no_tx
;;; TODO: free all unused buffers
stdcall KernelFree, eax
.no_tx:
ret
;***************************************************************************
; Function
; transmit
; Description
; Transmits a packet of data via the ethernet card
; buffer pointer in [esp+4]
; size of buffer in [esp+8]
; pointer to device structure in ebx
;
; only one transmit descriptor is used
;
;***************************************************************************
align 4
transmit:
cmp dword [esp+8], MAX_ETH_FRAME_SIZE
jg transmit_finish
cmp dword [esp+8], 60
jl transmit_finish
movzx ecx, [device.cur_tx]
mov ecx, [device.txd+ecx*16]
;; TODO: check if desc is empty (for example: check for eax, 0x6200000 at [ecx+4]
;;; or: count number of available descriptors
mov eax, [esp+4]
mov dword [ecx + 12], eax
GetRealAddr
mov dword [ecx + 8], eax
mov eax, [esp+8]
and eax, DSIZE
or eax, 0x80000000 ; card owns descriptor
mov dword [ecx + 4], eax
; update stats
inc [device.packets_tx]
add dword [device.bytes_tx], ecx
adc dword [device.bytes_tx+4], 0
ret 8
; End of code
align 4 ; Place all initialised data here
devices dd 0
specific_table:
; dd SIS630A_900_REV,Get_Mac_SIS630A_900_REV,0
; dd SIS630E_900_REV,Get_Mac_SIS630E_900_REV,0
dd SIS630S_900_REV,Get_Mac_SIS635_900_REV,0
dd SIS630EA1_900_REV,Get_Mac_SIS635_900_REV,0
dd SIS630ET_900_REV,Get_Mac_SIS635_900_REV,0;SIS630ET_900_REV_SpecialFN
dd SIS635A_900_REV,Get_Mac_SIS635_900_REV,0
dd SIS900_960_REV,SIS960_get_mac_addr,0
dd SIS900B_900_REV,get_mac_addr,0
dd 0 ; end of list
version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF)
my_service db 'SIS900',0 ; max 16 chars include zero
include_debug_strings ; All data wich FDO uses will be included here
section '.data' data readable writable align 16; place all uninitialized data place here
device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling
View Git Blame Copy Permalink