kolibrios/kernel/trunk/blkdev/disk_cache.inc
CleverMouse 6f2514bcd9 don't trash ebx in fs_read64_sys, was broken in r5089
git-svn-id: svn://kolibrios.org@5095 a494cfbc-eb01-0410-851d-a64ba20cac60
2014-09-08 18:46:36 +00:00

1387 lines
50 KiB
PHP

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2011-2014. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
; Read/write functions try to do large operations,
; it is significantly faster than several small operations.
; This requires large buffers.
; We can't use input/output buffers directly - they can be controlled
; by user-mode application, so they can be modified between the operation
; and copying to/from cache, giving invalid data in cache.
; It is unclear how to use cache directly, currently cache items are
; allocated/freed sector-wise, so items for sequential sectors can be
; scattered over all the cache.
; So read/write functions allocate a temporary buffer which is
; 1) not greater than half of free memory and
; 2) not greater than the following constant.
CACHE_MAX_ALLOC_SIZE = 4 shl 20
; Legacy interface for filesystems fs_{read,write}32_{sys,app}
; gives only one sector for FS. However, per-sector reading is inefficient,
; so internally fs_read32_{sys,app} reads to the cache several sequential
; sectors, hoping that they will be useful.
; Total number of sectors is given by the following constant.
CACHE_LEGACY_READ_SIZE = 16
; This structure describes one item in the cache.
struct CACHE_ITEM
SectorLo dd ? ; low 32 bits of sector
SectorHi dd ? ; high 32 bits of sector
Status dd ? ; one of CACHE_ITEM_*
ends
; Possible values for CACHE_ITEM_*
CACHE_ITEM_EMPTY = 0
CACHE_ITEM_COPY = 1
CACHE_ITEM_MODIFIED = 2
; Read several sequential sectors using cache #1.
; in: edx:eax = start sector, relative to start of partition
; in: ecx = number of sectors to read
; in: ebx -> buffer
; in: ebp -> PARTITION
; out: eax = error code, 0 = ok
; out: ecx = number of sectors that were read
fs_read64_sys:
; Save ebx, set ebx to SysCache and let the common part do its work.
push ebx ebx
mov ebx, [ebp+PARTITION.Disk]
add ebx, DISK.SysCache
jmp fs_read64_common
; Read several sequential sectors using cache #2.
; in: edx:eax = start sector, relative to start of partition
; in: ecx = number of sectors to read
; in: edi -> buffer
; in: ebp -> PARTITION
; out: eax = error code, 0 = ok
; out: ecx = number of sectors that were read
fs_read64_app:
; Save ebx, set ebx to AppCache and let the common part do its work.
push ebx ebx
mov ebx, [ebp+PARTITION.Disk]
add ebx, DISK.AppCache
; Common part of fs_read64_{app,sys}:
; read several sequential sectors using the given cache.
fs_read64_common:
; 1. Setup stack frame.
push esi edi ; save used registers to be stdcall
push 0 ; initialize .error_code
push ebx edx eax ecx ecx ; initialize stack variables
virtual at esp
.local_vars:
.num_sectors_orig dd ?
; Number of sectors that should be read. Used to generate output value of ecx.
.num_sectors dd ?
; Number of sectors that remain to be read. Decreases from .num_sectors_orig to 0.
.sector_lo dd ? ; low 32 bits of the current sector
.sector_hi dd ? ; high 32 bits of the current sector
.cache dd ? ; pointer to DISKCACHE
.error_code dd ? ; current status
.local_vars_size = $ - .local_vars
.saved_regs rd 2
.buffer dd ? ; filled by fs_read64_{sys,app}
end virtual
; 2. Validate parameters against partition length:
; immediately return error if edx:eax are beyond partition end,
; decrease .num_sectors and .num_sectors_orig, if needed,
; so that the entire operation fits in the partition limits.
mov eax, dword [ebp+PARTITION.Length]
mov edx, dword [ebp+PARTITION.Length+4]
sub eax, [.sector_lo]
sbb edx, [.sector_hi]
jb .end_of_media
jnz .no_end_of_media
cmp ecx, eax
jbe .no_end_of_media
; If .num_sectors got decreased, set status to DISK_STATUS_END_OF_MEDIA;
; if all subsequent operations would be successful, this would become the final
; status, otherwise this would be rewritten by failed operation.
mov [.num_sectors], eax
mov [.num_sectors_orig], eax
mov [.error_code], DISK_STATUS_END_OF_MEDIA
.no_end_of_media:
; 3. If number of sectors to read is zero, either because zero-sectors operation
; was requested or because it got decreased to zero due to partition limits,
; just return the current status.
cmp [.num_sectors], 0
jz .return
; 4. Shift sector from partition-relative to absolute.
mov eax, dword [ebp+PARTITION.FirstSector]
mov edx, dword [ebp+PARTITION.FirstSector+4]
add [.sector_lo], eax
adc [.sector_hi], edx
; 5. If the cache is disabled, pass the request directly to the driver.
cmp [ebx+DISKCACHE.pointer], 0
jz .nocache
; 6. Look for sectors in the cache, sequentially from the beginning.
; Stop at the first sector that is not in the cache
; or when all sectors were read from the cache.
; 6a. Acquire the lock.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_lock
.lookup_in_cache_loop:
; 6b. For each sector, call the lookup function without adding to the cache.
mov eax, [.sector_lo]
mov edx, [.sector_hi]
call cache_lookup_read
; 6c. If it has failed, the sector is not in cache;
; release the lock and go to 7.
jc .not_found_in_cache
; The sector is found in cache.
; 6d. Copy data for the caller, advance [.buffer].
mov esi, edi
mov edi, [.buffer]
mov eax, 1
shl eax, cl
mov ecx, eax
shr ecx, 2
rep movsd
mov [.buffer], edi
; 6e. Advance the sector.
add [.sector_lo], 1
adc [.sector_hi], 0
; 6f. Decrement number of sectors left.
; If all sectors were read, release the lock and return.
dec [.num_sectors]
jnz .lookup_in_cache_loop
; Release the lock acquired at 6a.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_unlock
.return:
mov eax, [.error_code]
mov ecx, [.num_sectors_orig]
sub ecx, [.num_sectors]
.nothing:
add esp, .local_vars_size
pop edi esi ebx ebx ; restore used registers to be stdcall
ret
.not_found_in_cache:
; Release the lock acquired at 6a.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_unlock
; The current sector is not present in the cache.
; Ask the driver to read all requested not-yet-read sectors,
; put results in the cache.
; Also, see the comment before the definition of CACHE_MAX_ALLOC_SIZE.
; 7. Allocate buffer for operations.
; Normally, create buffer that is sufficient for all remaining data.
; However, for extra-large requests make an upper limit:
; do not use more than half of the free memory
; or more than CACHE_MAX_ALLOC_SIZE bytes.
mov ecx, [ebx+DISKCACHE.sector_size_log]
mov ebx, [pg_data.pages_free]
shr ebx, 1
jz .nomemory
cmp ebx, CACHE_MAX_ALLOC_SIZE shr 12
jbe @f
mov ebx, CACHE_MAX_ALLOC_SIZE shr 12
@@:
shl ebx, 12
shr ebx, cl
jz .nomemory
cmp ebx, [.num_sectors]
jbe @f
mov ebx, [.num_sectors]
@@:
mov eax, ebx
shl eax, cl
stdcall kernel_alloc, eax
; If failed, return the appropriate error code.
test eax, eax
jz .nomemory
mov esi, eax
; Split the request to chunks that fit in the allocated buffer.
.read_loop:
; 8. Get iteration size: either size of allocated buffer in sectors
; or number of sectors left, select what is smaller.
cmp ebx, [.num_sectors]
jbe @f
mov ebx, [.num_sectors]
@@:
; 9. Create second portion of local variables.
; Note that variables here and above are esp-relative;
; it means that all addresses should be corrected when esp is changing.
push ebx esi esi
push ebx
; In particular, num_sectors is now [.num_sectors+.local_vars2_size].
virtual at esp
.local_vars2:
.current_num_sectors dd ? ; number of sectors that were read
.current_buffer dd ?
; pointer inside .allocated_buffer that points
; to the beginning of not-processed data
.allocated_buffer dd ? ; saved in safe place
.iteration_size dd ? ; saved in safe place
.local_vars2_size = $ - .local_vars2
end virtual
; 10. Call the driver, reading the next chunk.
push esp ; numsectors
push [.sector_hi+.local_vars2_size+4] ; startsector
push [.sector_lo+.local_vars2_size+8] ; startsector
push esi ; buffer
mov esi, [ebp+PARTITION.Disk]
mov al, DISKFUNC.read
call disk_call_driver
; If failed, save error code.
test eax, eax
jz @f
mov [.error_code+.local_vars2_size], eax
@@:
; 11. Copy data for the caller, advance .buffer.
cmp [.current_num_sectors], 0
jz .copy_done
mov ebx, [.cache+.local_vars2_size]
mov eax, [.current_num_sectors]
mov ecx, [ebx+DISKCACHE.sector_size_log]
shl eax, cl
mov esi, [.allocated_buffer]
mov edi, [.buffer+.local_vars2_size]
mov ecx, eax
shr ecx, 2
rep movsd
mov [.buffer+.local_vars2_size], edi
; 12. Copy data to the cache.
; 12a. Acquire the lock.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_lock
; 12b. Prepare for the loop: create a local variable that
; stores number of sectors to be copied.
push [.current_num_sectors]
.store_to_cache:
; 12c. For each sector, call the lookup function with adding to the cache, if not yet.
mov eax, [.sector_lo+.local_vars2_size+4]
mov edx, [.sector_hi+.local_vars2_size+4]
call cache_lookup_write
test eax, eax
jnz .cache_error
; 12d. If the sector was already present in the cache as modified,
; data that were read at step 10 for this sector are obsolete,
; so rewrite data for the caller from the cache.
cmp [esi+CACHE_ITEM.Status], CACHE_ITEM_MODIFIED
jnz .not_modified
mov esi, edi
mov edi, [.buffer+.local_vars2_size+4]
mov eax, [esp]
shl eax, cl
sub edi, eax
mov eax, 1
shl eax, cl
mov ecx, eax
shr ecx, 2
rep movsd
add [.current_buffer+4], eax
jmp .sector_done
.not_modified:
; 12e. For each not-modified sector,
; copy data, mark the item as not-modified copy of the disk,
; advance .current_buffer and .sector_hi:.sector_lo to the next sector.
mov [esi+CACHE_ITEM.Status], CACHE_ITEM_COPY
mov eax, 1
shl eax, cl
mov esi, [.current_buffer+4]
mov ecx, eax
shr ecx, 2
rep movsd
mov [.current_buffer+4], esi
.sector_done:
add [.sector_lo+.local_vars2_size+4], 1
adc [.sector_hi+.local_vars2_size+4], 0
; 12f. Continue the loop 12c-12e until all sectors are read.
dec dword [esp]
jnz .store_to_cache
.cache_error:
; 12g. Restore after the loop: pop the local variable.
pop ecx
; 12h. Release the lock.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_unlock
.copy_done:
; 13. Remove portion of local variables created at step 9.
pop ecx
pop esi esi ebx
; 14. Continue iterations while number of sectors read by the driver
; is equal to number of sectors requested and there are additional sectors.
cmp ecx, ebx
jnz @f
sub [.num_sectors], ebx
jnz .read_loop
@@:
; 15. Free the buffer allocated at step 7 and return.
stdcall kernel_free, esi
jmp .return
; Special branches:
.nomemory:
; memory allocation failed at step 7: return the corresponding error
mov [.error_code], DISK_STATUS_NO_MEMORY
jmp .return
.nocache:
; step 5, after correcting number of sectors to fit in partition limits
; and advancing partition-relative sector to absolute,
; sees that cache is disabled: pass corrected request to the driver
lea eax, [.num_sectors]
push eax ; numsectors
push [.sector_hi+4] ; startsector
push [.sector_lo+8] ; startsector
push [.buffer+12] ; buffer
mov esi, [ebp+PARTITION.Disk]
mov al, DISKFUNC.read
call disk_call_driver
test eax, eax
jnz @f
mov eax, [.error_code]
@@:
mov ecx, [.num_sectors]
jmp .nothing
.end_of_media:
; requested sector is beyond the partition end: return the corresponding error
mov [.error_code], DISK_STATUS_END_OF_MEDIA
jmp .return
; Write several sequential sectors using cache #1.
; in: edx:eax = start sector
; in: ecx = number of sectors to write
; in: ebx -> buffer
; in: ebp -> PARTITION
; out: eax = error code, 0 = ok
; out: ecx = number of sectors that were written
fs_write64_sys:
; Save ebx, set ebx to SysCache and let the common part do its work.
push ebx
mov ebx, [ebp+PARTITION.Disk]
add ebx, DISK.SysCache
jmp fs_write64_common
; Write several sequential sectors using cache #2.
; in: edx:eax = start sector
; in: ecx = number of sectors to write
; in: ebx -> buffer
; in: ebp -> PARTITION
; out: eax = error code, 0 = ok
; out: ecx = number of sectors that were written
fs_write64_app:
; Save ebx, set ebx to AppCache and let the common part do its work.
push ebx
mov ebx, [ebp+PARTITION.Disk]
add ebx, DISK.AppCache
; Common part of fs_write64_{app,sys}:
; write several sequential sectors using the given cache.
fs_write64_common:
; 1. Setup stack frame.
push esi edi ; save used registers to be stdcall
push 0 ; initialize .error_code
push edx eax ecx ecx ; initialize stack variables
push [.buffer-4] ; copy [.buffer] to [.cur_buffer]
; -4 is due to esp-relative addressing
virtual at esp
.local_vars:
.cur_buffer dd ? ; pointer to data that are currently copying
.num_sectors_orig dd ?
; Number of sectors that should be written. Used to generate output value of ecx.
.num_sectors dd ?
; Number of sectors that remain to be written.
.sector_lo dd ? ; low 32 bits of the current sector
.sector_hi dd ? ; high 32 bits of the current sector
.error_code dd ? ; current status
.local_vars_size = $ - .local_vars
.saved_regs rd 2
.buffer dd ? ; filled by fs_write64_{sys,app}
end virtual
; 2. Validate parameters against partition length:
; immediately return error if edx:eax are beyond partition end,
; decrease .num_sectors and .num_sectors_orig, if needed,
; so that the entire operation fits in the partition limits.
mov eax, dword [ebp+PARTITION.Length]
mov edx, dword [ebp+PARTITION.Length+4]
sub eax, [.sector_lo]
sbb edx, [.sector_hi]
jb .end_of_media
jnz .no_end_of_media
cmp ecx, eax
jbe .no_end_of_media
; If .num_sectors got decreased, set status to DISK_STATUS_END_OF_MEDIA;
; if all subsequent operations would be successful, this would become the final
; status, otherwise this would be rewritten by failed operation.
mov [.num_sectors], eax
mov [.num_sectors_orig], eax
mov [.error_code], DISK_STATUS_END_OF_MEDIA
.no_end_of_media:
; 3. If number of sectors to write is zero, either because zero-sectors operation
; was requested or because it got decreased to zero due to partition limits,
; just return the current status.
cmp [.num_sectors], 0
jz .return
; 4. Shift sector from partition-relative to absolute.
mov eax, dword [ebp+PARTITION.FirstSector]
mov edx, dword [ebp+PARTITION.FirstSector+4]
add [.sector_lo], eax
adc [.sector_hi], edx
; 5. If the cache is disabled, pass the request directly to the driver.
cmp [ebx+DISKCACHE.pointer], 0
jz .nocache
; 6. Store sectors in the cache, sequentially from the beginning.
; 6a. Acquire the lock.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_lock
.lookup_in_cache_loop:
; 6b. For each sector, call the lookup function with adding to the cache, if not yet.
mov eax, [.sector_lo]
mov edx, [.sector_hi]
call cache_lookup_write
test eax, eax
jnz .cache_error
; 6c. For each sector, copy data, mark the item as modified and not saved,
; advance .current_buffer to the next sector.
mov [esi+CACHE_ITEM.Status], CACHE_ITEM_MODIFIED
mov eax, 1
shl eax, cl
mov esi, [.cur_buffer]
mov ecx, eax
shr ecx, 2
rep movsd
mov [.cur_buffer], esi
; 6d. Remove the sector from the other cache.
; Normally it should not be there, but prefetching could put to the app cache
; data that normally should belong to the sys cache and vice versa.
; Note: this requires that both caches must be protected by the same lock.
mov eax, [.sector_lo]
mov edx, [.sector_hi]
push ebx
sub ebx, [ebp+PARTITION.Disk]
xor ebx, DISK.SysCache xor DISK.AppCache
add ebx, [ebp+PARTITION.Disk]
call cache_lookup_read
jc @f
mov [esi+CACHE_ITEM.Status], CACHE_ITEM_EMPTY
@@:
pop ebx
; 6e. Advance .sector_hi:.sector_lo to the next sector.
add [.sector_lo], 1
adc [.sector_hi], 0
; 6f. Continue the loop at 6b-6e until all sectors are processed.
dec [.num_sectors]
jnz .lookup_in_cache_loop
.unlock_return:
; 6g. Release the lock and return.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_unlock
.return:
mov eax, [.error_code]
mov ecx, [.num_sectors_orig]
sub ecx, [.num_sectors]
.nothing:
add esp, .local_vars_size
pop edi esi ebx
ret
; Special branches:
.cache_error:
; error at flushing the cache while adding sector to the cache:
; return the error from the lookup function
mov [.error_code], eax
jmp .unlock_return
.end_of_media:
; requested sector is beyond the partition end: return the corresponding error
mov eax, DISK_STATUS_END_OF_MEDIA
xor ecx, ecx
jmp .nothing
.nocache:
; step 5, after correcting number of sectors to fit in partition limits
; and advancing partition-relative sector to absolute,
; sees that cache is disabled: pass corrected request to the driver
lea eax, [.num_sectors]
push eax ; numsectors
push [.sector_hi+4] ; startsector
push [.sector_lo+8] ; startsector
push [.buffer+12] ; buffer
mov esi, [ebp+PARTITION.Disk]
mov al, DISKFUNC.write
call disk_call_driver
mov ecx, [.num_sectors]
jmp .nothing
; Legacy. Use fs_read64_sys instead.
; This function is intended to replace the old 'hd_read' function when
; [hdd_appl_data] = 0, so its input/output parameters are the same, except
; that it can't use the global variables 'hd_error' and 'hdd_appl_data'.
; in: eax = sector, ebx = buffer, ebp = pointer to PARTITION structure
; eax is relative to partition start
; out: eax = error code; 0 = ok
fs_read32_sys:
; Save ebx, set ebx to SysCache and let the common part do its work.
push ebx
mov ebx, [ebp+PARTITION.Disk]
add ebx, DISK.SysCache
jmp fs_read32_common
; Legacy. Use fs_read64_app instead.
; This function is intended to replace the old 'hd_read' function when
; [hdd_appl_data] = 1, so its input/output parameters are the same, except
; that it can't use the global variables 'hd_error' and 'hdd_appl_data'.
; in: eax = sector, ebx = buffer, ebp = pointer to PARTITION structure
; eax is relative to partition start
; out: eax = error code; 0 = ok
fs_read32_app:
; Save ebx, set ebx to AppCache and let the common part do its work.
push ebx
mov ebx, [ebp+PARTITION.Disk]
add ebx, DISK.AppCache
; This label is the common part of fs_read32_sys and fs_read32_app.
fs_read32_common:
; 1. Check that the required sector is inside the partition. If no, return
; DISK_STATUS_END_OF_MEDIA.
cmp dword [ebp+PARTITION.Length+4], 0
jnz @f
cmp dword [ebp+PARTITION.Length], eax
ja @f
mov eax, DISK_STATUS_END_OF_MEDIA
pop ebx
ret
@@:
; 2. Get the absolute sector on the disk.
push ecx edx esi edi
xor edx, edx
add eax, dword [ebp+PARTITION.FirstSector]
adc edx, dword [ebp+PARTITION.FirstSector+4]
; 3. If there is no cache for this disk, just pass the request to the driver.
cmp [ebx+DISKCACHE.pointer], 0
jnz .scancache
push 1
push esp ; numsectors
push edx ; startsector
push eax ; startsector
pushd [esp+32]; buffer
mov esi, [ebp+PARTITION.Disk]
mov al, DISKFUNC.read
call disk_call_driver
pop ecx
pop edi esi edx ecx
pop ebx
ret
.scancache:
push ebx edx eax
virtual at esp
.local_vars:
.sector_lo dd ?
.sector_hi dd ?
.cache dd ?
.local_vars_size = $ - .local_vars
.saved_regs rd 4
.buffer dd ?
end virtual
; 4. Scan for the requested sector in the cache.
; If found, copy the data and return.
; 4a. Acquire the lock.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_lock
; 4b. Call the lookup function without adding to the cache.
mov eax, [.sector_lo]
mov edx, [.sector_hi]
call cache_lookup_read
; If not found, go to 5.
jc .not_found_in_cache
.found_in_cache:
; 4c. Copy the data.
mov esi, edi
mov edi, [.buffer]
mov eax, 1
shl eax, cl
mov ecx, eax
shr ecx, 2
rep movsd
; 4d. Release the lock and return success.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_unlock
.return:
xor eax, eax
.return_eax:
add esp, .local_vars_size
pop edi esi edx ecx
pop ebx
ret
.not_found_in_cache:
; 5. Decide whether we need to prefetch further sectors.
; If so, advance to 6. If not, go to 13.
; Assume that devices < 3MB are floppies which are slow
; (ramdisk does not have a cache, so we don't even get here for ramdisk).
; This is a dirty hack, but the entire function is somewhat hacky. Use fs_read64*.
mov eax, [ebp+PARTITION.Disk]
cmp dword [eax+DISK.MediaInfo.Capacity+4], 0
jnz @f
cmp dword [eax+DISK.MediaInfo.Capacity], 3 shl (20-9)
jb .floppy
@@:
; We want to prefetch CACHE_LEGACY_READ_SIZE sectors.
; 6. Release the lock acquired at step 4a.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_unlock
; 7. Allocate buffer for CACHE_LEGACY_READ_SIZE sectors.
mov eax, CACHE_LEGACY_READ_SIZE
mov ecx, [ebx+DISKCACHE.sector_size_log]
shl eax, cl
stdcall kernel_alloc, eax
; If failed, return the corresponding error code.
test eax, eax
jz .nomemory
; 8. Create second portion of local variables.
push eax eax
push CACHE_LEGACY_READ_SIZE
virtual at esp
.local_vars2:
.num_sectors dd ? ; number of sectors left
.current_buffer dd ? ; pointer to data that are currently copying
.allocated_buffer dd ? ; saved at safe place
.local_vars2_size = $ - .local_vars2
end virtual
; 9. Call the driver to read CACHE_LEGACY_READ_SIZE sectors.
push esp ; numsectors
push [.sector_hi+.local_vars2_size+4] ; startsector
push [.sector_lo+.local_vars2_size+8] ; startsector
push eax ; buffer
mov esi, [ebp+PARTITION.Disk]
mov al, DISKFUNC.read
call disk_call_driver
; Note: we're ok if at least one sector is read,
; read error somewhere after that just limits data to be put in cache.
cmp [.num_sectors], 0
jz .read_error
; 10. Copy data for the caller.
mov esi, [.allocated_buffer]
mov edi, [.buffer+.local_vars2_size]
mov ecx, [ebx+DISKCACHE.sector_size_log]
mov eax, 1
shl eax, cl
mov ecx, eax
shr ecx, 2
rep movsd
; 11. Store all sectors that were successfully read to the cache.
; 11a. Acquire the lock.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_lock
.store_to_cache:
; 11b. For each sector, call the lookup function with adding to the cache, if not yet.
mov eax, [.sector_lo+.local_vars2_size]
mov edx, [.sector_hi+.local_vars2_size]
call cache_lookup_write
test eax, eax
jnz .cache_error
; 11c. Ignore sectors marked as modified: for them the cache is more recent that disk data.
mov eax, 1
shl eax, cl
cmp [esi+CACHE_ITEM.Status], CACHE_ITEM_MODIFIED
jnz .not_modified
add [.current_buffer], eax
jmp .sector_done
.not_modified:
; 11d. For each sector, copy data, mark the item as not-modified copy of the disk,
; advance .current_buffer and .sector_hi:.sector_lo to the next sector.
mov [esi+CACHE_ITEM.Status], CACHE_ITEM_COPY
mov esi, [.current_buffer]
mov ecx, eax
shr ecx, 2
rep movsd
mov [.current_buffer], esi
.sector_done:
add [.sector_lo+.local_vars2_size], 1
adc [.sector_hi+.local_vars2_size], 0
; 11e. Continue the loop at 11b-11d until all sectors are processed.
dec [.num_sectors]
jnz .store_to_cache
.cache_error:
; 11f. Release the lock.
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
call mutex_unlock
.copy_done:
; 12. Remove portion of local variables created at step 8,
; free the buffer allocated at step 7 and return.
pop ecx ecx
stdcall kernel_free
jmp .return
.read_error:
; If no sectors were read, free the buffer allocated at step 7
; and pass the error to the caller.
push eax
stdcall kernel_free, [.allocated_buffer+4]
pop eax
add esp, .local_vars2_size
jmp .return_eax
.nomemory:
mov eax, DISK_STATUS_NO_MEMORY
jmp .return_eax
.floppy:
; We don't want to prefetch anything, just read one sector.
; We are still holding the lock acquired at step 4a.
; 13. Call the lookup function adding sector to the cache.
call cache_lookup_write
test eax, eax
jnz .floppy_cache_error
push esi
; 14. Call the driver to read one sector.
push 1
push esp
push edx
push [.sector_lo+16]
push edi
mov esi, [ebp+PARTITION.Disk]
mov al, DISKFUNC.read
call disk_call_driver
pop ecx
dec ecx
jnz .floppy_read_error
; 15. Get the slot and pointer to the cache item,
; change the status to not-modified copy of the disk
; and go to 4c.
pop esi
mov [esi+CACHE_ITEM.Status], CACHE_ITEM_COPY
jmp .found_in_cache
; On error at steps 13-14, release the lock
; and pass the error to the caller.
.floppy_read_error:
pop ecx
.floppy_cache_error:
mov ecx, [ebp+PARTITION.Disk]
add ecx, DISK.CacheLock
push eax
call mutex_unlock
pop eax
jmp .return_eax
; This function is intended to replace the old 'hd_write' function when
; [hdd_appl_data] = 0, so its input/output parameters are the same, except
; that it can't use the global variables 'hd_error' and 'hdd_appl_data'.
; in: eax = sector, ebx = buffer, ebp = pointer to PARTITION structure
; eax is relative to partition start
; out: eax = error code; 0 = ok
fs_write32_sys:
; Just call the advanced function.
push ecx edx
xor edx, edx
mov ecx, 1
call fs_write64_sys
pop edx ecx
ret
; This function is intended to replace the old 'hd_write' function when
; [hdd_appl_data] = 1, so its input/output parameters are the same, except
; that it can't use the global variables 'hd_error' and 'hdd_appl_data'.
; in: eax = sector, ebx = buffer, ebp = pointer to PARTITION structure
; eax is relative to partition start
; out: eax = error code; 0 = ok
fs_write32_app:
; Just call the advanced function.
push ecx edx
xor edx, edx
mov ecx, 1
call fs_write64_app
pop edx ecx
ret
; Lookup for the given sector in the given cache.
; If the sector is not present, return error.
; The caller must acquire the cache lock.
; in: edx:eax = sector
; in: ebx -> DISKCACHE structure
; out: CF set if sector is not in cache
; out: ecx = sector_size_log
; out: esi -> sector:status
; out: edi -> sector data
proc cache_lookup_read
mov esi, [ebx+DISKCACHE.pointer]
add esi, sizeof.CACHE_ITEM
mov edi, 1
.hdreadcache:
cmp [esi+CACHE_ITEM.Status], CACHE_ITEM_EMPTY
je .nohdcache
cmp [esi+CACHE_ITEM.SectorLo], eax
jne .nohdcache
cmp [esi+CACHE_ITEM.SectorHi], edx
jne .nohdcache
mov ecx, [ebx+DISKCACHE.sector_size_log]
shl edi, cl
add edi, [ebx+DISKCACHE.data]
clc
ret
.nohdcache:
add esi, sizeof.CACHE_ITEM
inc edi
cmp edi, [ebx+DISKCACHE.sad_size]
jbe .hdreadcache
stc
ret
endp
; Lookup for the given sector in the given cache.
; If the sector is not present, allocate space for it,
; possibly flushing data.
; in: edx:eax = sector
; in: ebx -> DISKCACHE structure
; in: ebp -> PARTITION structure
; out: eax = error code
; out: esi -> sector:status
; out: edi -> sector data
proc cache_lookup_write
call cache_lookup_read
jnc .return0
push edx eax
;-----------------------------------------------------------
; find empty or read slot, flush cache if next 12.5% is used by write
; output : ecx = cache slot
;-----------------------------------------------------------
; Note: the code is essentially inherited, so probably
; no analysis of efficiency were done.
; However, it works.
.search_again:
mov eax, [ebx+DISKCACHE.sad_size]
mov ecx, [ebx+DISKCACHE.search_start]
shr eax, 3
lea esi, [ecx*sizeof.CACHE_ITEM/4]
shl esi, 2
add esi, [ebx+DISKCACHE.pointer]
.search_for_empty:
inc ecx
add esi, sizeof.CACHE_ITEM
cmp ecx, [ebx+DISKCACHE.sad_size]
jbe .inside_cache
mov ecx, 1
mov esi, [ebx+DISKCACHE.pointer]
add esi, sizeof.CACHE_ITEM
.inside_cache:
cmp [esi+CACHE_ITEM.Status], CACHE_ITEM_MODIFIED
jb .found_slot ; it's empty or read
dec eax
jnz .search_for_empty
stdcall write_cache64, [ebp+PARTITION.Disk] ; no empty slots found, write all
test eax, eax
jne .found_slot_access_denied
jmp .search_again ; and start again
.found_slot:
mov [ebx+DISKCACHE.search_start], ecx
popd [esi+CACHE_ITEM.SectorLo]
popd [esi+CACHE_ITEM.SectorHi]
mov [esi+CACHE_ITEM.Status], CACHE_ITEM_EMPTY
mov edi, ecx
mov ecx, [ebx+DISKCACHE.sector_size_log]
shl edi, cl
add edi, [ebx+DISKCACHE.data]
.return0:
xor eax, eax ; success
ret
.found_slot_access_denied:
add esp, 8
ret
endp
; Flush the given cache.
; The caller must acquire the cache lock.
; in: ebx -> DISKCACHE
; in: first argument in stdcall convention -> PARTITION
proc write_cache64
; 1. Setup stack frame.
push esi edi ; save used registers to be stdcall
sub esp, .local_vars_size ; reserve space for local vars
virtual at esp
.local_vars:
.cache_end dd ? ; item past the end of the cache
.size_left dd ? ; items left to scan
.current_ptr dd ? ; pointer to the current item
;
; Write operations are coalesced in chains,
; one chain describes a sequential interval of sectors,
; they can be sequential or scattered in the cache.
.sequential dd ?
; boolean variable, 1 if the current chain is sequential in the cache,
; 0 if additional buffer is needed to perform the operation
.chain_start_pos dd ? ; data of chain start item
.chain_start_ptr dd ? ; pointer to chain start item
.chain_size dd ? ; chain size (thanks, C.O.)
.iteration_size dd ?
; If the chain size is too large, split the operation to several iterations.
; This is size in sectors for one iterations.
.iteration_buffer dd ? ; temporary buffer for non-sequential chains
.local_vars_size = $ - .local_vars
rd 2 ; saved registers
dd ? ; return address
.disk dd ? ; first argument
end virtual
; 1. If there is no cache for this disk, nothing to do, just return zero.
cmp [ebx+DISKCACHE.pointer], 0
jz .return0
; 2. Prepare for the loop: initialize current pointer and .size_left,
; calculate .cache_end.
mov ecx, [ebx+DISKCACHE.sad_size]
mov [.size_left], ecx
lea ecx, [ecx*sizeof.CACHE_ITEM/4]
shl ecx, 2
mov esi, [ebx+DISKCACHE.pointer]
add esi, sizeof.CACHE_ITEM
add ecx, esi
mov [.cache_end], ecx
; 3. Main loop: go over all items, go to 5 for every modified item.
.look:
cmp [esi+CACHE_ITEM.Status], CACHE_ITEM_MODIFIED
jz .begin_write
.look_next:
add esi, sizeof.CACHE_ITEM
dec [.size_left]
jnz .look
; 4. Return success.
.return0:
xor eax, eax
.return:
add esp, .local_vars_size
pop edi esi ; restore used registers to be stdcall
ret 4 ; return popping one argument
.begin_write:
; We have found a modified item.
; 5. Prepare for chain finding: save the current item, initialize chain variables.
mov [.current_ptr], esi
; Initialize chain as sequential zero-length starting at the current item.
mov [.chain_start_ptr], esi
mov eax, [ebx+DISKCACHE.sad_size]
sub eax, [.size_left]
inc eax
mov ecx, [ebx+DISKCACHE.sector_size_log]
shl eax, cl
add eax, [ebx+DISKCACHE.data]
mov [.chain_start_pos], eax
mov [.chain_size], 0
mov [.sequential], 1
; 6. Expand the chain backward.
; Note: the main loop in step 2 looks for items sequentially,
; so the previous item is not modified. If the previous sector
; is present in the cache, it automatically makes the chain scattered.
; 6a. Calculate sector number: one before the sector for the current item.
mov eax, [esi+CACHE_ITEM.SectorLo]
mov edx, [esi+CACHE_ITEM.SectorHi]
sub eax, 1
sbb edx, 0
.find_chain_start:
; 6b. For each sector where the previous item does not expand the chain,
; call the lookup function without adding to the cache.
call cache_lookup_read
; 6c. If the sector is not found in cache or is not modified, stop expanding
; and advance to step 7.
jc .found_chain_start
cmp [esi+CACHE_ITEM.Status], CACHE_ITEM_MODIFIED
jnz .found_chain_start
; 6d. We have found a new block that expands the chain backwards.
; It makes the chain non-sequential.
; Normally, sectors come in sequential blocks, so try to look at previous items
; before returning to 6b; if there is a sequential block indeed, this saves some
; time instead of many full-fledged lookups.
mov [.sequential], 0
mov [.chain_start_pos], edi
.look_backward:
; 6e. For each sector, update chain start pos/ptr, decrement sector number,
; look at the previous item.
mov [.chain_start_ptr], esi
inc [.chain_size]
sub eax, 1
sbb edx, 0
sub esi, sizeof.CACHE_ITEM
; If the previous item exists...
cmp esi, [ebx+DISKCACHE.pointer]
jbe .find_chain_start
; ...describes the correct sector...
cmp [esi+CACHE_ITEM.SectorLo], eax
jnz .find_chain_start
cmp [esi+CACHE_ITEM.SectorHi], edx
jnz .find_chain_start
; ...and is modified...
cmp [esi+CACHE_ITEM.Status], CACHE_ITEM_MODIFIED
jnz .found_chain_start
; ...expand the chain one sector backwards and continue the loop at 6e.
; Otherwise, advance to step 7 if the previous item describes the correct sector
; but is not modified, and return to step 6b otherwise.
mov edi, 1
shl edi, cl
sub [.chain_start_pos], edi
jmp .look_backward
.found_chain_start:
; 7. Expand the chain forward.
; 7a. Prepare for the loop at 7b:
; set esi = pointer to current item, edx:eax = current sector.
mov esi, [.current_ptr]
mov eax, [esi+CACHE_ITEM.SectorLo]
mov edx, [esi+CACHE_ITEM.SectorHi]
.look_forward:
; 7b. First, look at the next item. If it describes the next sector:
; if it is modified, expand the chain with that sector and continue this step,
; if it is not modified, the chain is completed, so advance to step 8.
inc [.chain_size]
add eax, 1
adc edx, 0
add esi, sizeof.CACHE_ITEM
cmp esi, [.cache_end]
jae .find_chain_end
cmp [esi+CACHE_ITEM.SectorLo], eax
jnz .find_chain_end
cmp [esi+CACHE_ITEM.SectorHi], edx
jnz .find_chain_end
cmp [esi+CACHE_ITEM.Status], CACHE_ITEM_MODIFIED
jnz .found_chain_end
jmp .look_forward
.find_chain_end:
; 7c. Otherwise, call the lookup function.
call cache_lookup_read
; 7d. If the next sector is present in the cache and is modified,
; mark the chain as non-sequential and continue to step 7b.
jc .found_chain_end
cmp [esi+CACHE_ITEM.Status], CACHE_ITEM_MODIFIED
jnz .found_chain_end
mov [.sequential], 0
jmp .look_forward
.found_chain_end:
; 8. Decide whether the chain is sequential or scattered.
; Advance to step 9 for sequential chains, go to step 10 for scattered chains.
cmp [.sequential], 0
jz .write_non_sequential
.write_sequential:
; 9. Write a sequential chain to disk.
; 9a. Pass the entire chain to the driver.
mov eax, [.chain_start_ptr]
lea ecx, [.chain_size]
push ecx ; numsectors
pushd [eax+CACHE_ITEM.SectorHi] ; startsector
pushd [eax+CACHE_ITEM.SectorLo] ; startsector
push [.chain_start_pos+12] ; buffer
mov esi, [ebp+PARTITION.Disk]
mov al, DISKFUNC.write
call disk_call_driver
; 9b. If failed, pass the error code to the driver.
test eax, eax
jnz .return
; 9c. If succeeded, mark all sectors in the chain as not-modified,
; advance current item and number of items left to skip the chain.
mov esi, [.current_ptr]
mov eax, [.chain_size]
sub [.size_left], eax
@@:
mov [esi+CACHE_ITEM.Status], CACHE_ITEM_COPY
add esi, sizeof.CACHE_ITEM
dec eax
jnz @b
; 9d. Continue the main loop at step 2 if there are more sectors.
; Return success otherwise.
cmp [.size_left], 0
jnz .look
jmp .return0
.write_non_sequential:
; Write a non-sequential chain to the disk.
; 10. Allocate a temporary buffer.
; Use [.chain_size] sectors, but
; not greater than CACHE_MAX_ALLOC_SIZE bytes
; and not greater than half of free memory.
mov eax, [pg_data.pages_free]
shr eax, 1
jz .nomemory
cmp eax, CACHE_MAX_ALLOC_SIZE shr 12
jbe @f
mov eax, CACHE_MAX_ALLOC_SIZE shr 12
@@:
shl eax, 12
shr eax, cl
jz .nomemory
cmp eax, [.chain_size]
jbe @f
mov eax, [.chain_size]
@@:
mov [.iteration_size], eax
shl eax, cl
stdcall kernel_alloc, eax
test eax, eax
jz .nomemory
mov [.iteration_buffer], eax
.write_non_sequential_iteration:
; 11. Split the chain so that each iteration fits in the allocated buffer.
; Iteration size is the minimum of chain size and allocated size.
mov eax, [.chain_size]
cmp eax, [.iteration_size]
jae @f
mov [.iteration_size], eax
@@:
; 12. Prepare arguments for the driver.
mov esi, [.chain_start_ptr]
mov edi, [.iteration_buffer]
push [.iteration_size]
push esp ; numsectors
push [esi+CACHE_ITEM.SectorHi] ; startsector
push [esi+CACHE_ITEM.SectorLo] ; startsector
push edi ; buffer
; 13. Copy data from the cache to the temporary buffer,
; advancing chain_start pos/ptr and marking sectors as not-modified.
; 13a. Prepare for the loop: push number of sectors to process.
push [.iteration_size+20] ; temporary variable
.copy_loop:
; 13b. For each sector, copy the data.
; Note that edi is advanced automatically.
mov esi, [.chain_start_pos+24]
mov ecx, [ebx+DISKCACHE.sector_size_log]
mov eax, 1
shl eax, cl
mov ecx, eax
shr ecx, 2
rep movsd
mov ecx, eax ; keep for 13e
; 13c. Mark the item as not-modified.
mov esi, [.chain_start_ptr+24]
mov [esi+CACHE_ITEM.Status], CACHE_ITEM_COPY
; 13d. Check whether the next sector continues the chain.
; If so, advance to 13e. Otherwise, go to 13f.
mov eax, [esi+CACHE_ITEM.SectorLo]
mov edx, [esi+CACHE_ITEM.SectorHi]
add esi, sizeof.CACHE_ITEM
add eax, 1
adc edx, 0
cmp esi, [.cache_end+24]
jae .no_forward
cmp [esi+CACHE_ITEM.SectorLo], eax
jnz .no_forward
cmp [esi+CACHE_ITEM.SectorHi], edx
jnz .no_forward
; 13e. Increment position/pointer to the chain and
; continue the loop.
add [.chain_start_pos+24], ecx
mov [.chain_start_ptr+24], esi
dec dword [esp]
jnz .copy_loop
jmp .copy_done
.no_forward:
; 13f. Call the lookup function without adding to the cache.
; Update position/pointer with returned value.
; Note: for the last sector in the chain, edi/esi may contain
; garbage; we are not going to use them in this case.
push edi
call cache_lookup_read
mov [.chain_start_pos+28], edi
mov [.chain_start_ptr+28], esi
pop edi
dec dword [esp]
jnz .copy_loop
.copy_done:
; 13g. Restore the stack after 13a.
pop ecx
; 14. Call the driver.
mov esi, [ebp+PARTITION.Disk]
mov al, DISKFUNC.write
call disk_call_driver
pop ecx ; numsectors
; 15. If the driver has returned an error, free the buffer allocated at step 10
; and pass the error to the caller.
; Otherwise, remove the processed part from the chain and continue iterations
; starting in step 11 if there are more data to process.
test eax, eax
jnz .nonsequential_error
sub [.chain_size], ecx
jnz .write_non_sequential_iteration
; 16. The chain is written. Free the temporary buffer
; and continue the loop at step 2.
stdcall kernel_free, [.iteration_buffer]
mov esi, [.current_ptr]
jmp .look_next
.nonsequential_error:
push eax
stdcall kernel_free, [.iteration_buffer+4]
pop eax
jmp .return
.nomemory:
mov eax, DISK_STATUS_NO_MEMORY
jmp .return
endp
; This internal function is called from disk_add to initialize the caching for
; a new DISK.
; The algorithm is inherited from getcache.inc: take 1/32 part of the available
; physical memory, round down to 8 pages, limit by 128K from below and by 1M
; from above. Reserve 1/8 part of the cache for system data and 7/8 for app
; data.
; After the size is calculated, but before the cache is allocated, the device
; driver can adjust the size. In particular, setting size to zero disables
; caching: there is no sense in a cache for a ramdisk. In fact, such action
; is most useful example of a non-trivial adjustment.
; esi = pointer to DISK structure
disk_init_cache:
; 1. Verify sector size. The code requires it to be a power of 2 not less than 4.
; In the name of sanity check that sector size is not too small or too large.
bsf ecx, [esi+DISK.MediaInfo.SectorSize]
jz .invalid_sector_size
mov eax, 1
shl eax, cl
cmp eax, [esi+DISK.MediaInfo.SectorSize]
jnz .invalid_sector_size
cmp ecx, 6
jb .invalid_sector_size
cmp ecx, 14
jbe .normal_sector_size
.invalid_sector_size:
DEBUGF 1,'K : sector size %x is invalid\n',[esi+DISK.MediaInfo.SectorSize]
xor eax, eax
ret
.normal_sector_size:
mov [esi+DISK.SysCache.sector_size_log], ecx
mov [esi+DISK.AppCache.sector_size_log], ecx
; 2. Calculate the suggested cache size.
; 2a. Get the size of free physical memory in pages.
mov eax, [pg_data.pages_free]
; 2b. Use the value to calculate the size.
shl eax, 12 - 5 ; 1/32 of it in bytes
and eax, -8*4096 ; round down to the multiple of 8 pages
; 2c. Force lower and upper limits.
cmp eax, 1024*1024
jb @f
mov eax, 1024*1024
@@:
cmp eax, 128*1024
ja @f
mov eax, 128*1024
@@:
; 2d. Give a chance to the driver to adjust the size.
push eax
mov al, DISKFUNC.adjust_cache_size
call disk_call_driver
; Cache size calculated.
mov [esi+DISK.cache_size], eax
test eax, eax
jz .nocache
; 3. Allocate memory for the cache.
; 3a. Call the allocator.
stdcall kernel_alloc, eax
test eax, eax
jnz @f
; 3b. If it failed, say a message and return with eax = 0.
dbgstr 'no memory for disk cache'
jmp .nothing
@@:
; 4. Fill two DISKCACHE structures.
mov [esi+DISK.SysCache.pointer], eax
lea ecx, [esi+DISK.CacheLock]
call mutex_init
; The following code is inherited from getcache.inc.
mov edx, [esi+DISK.SysCache.pointer]
and [esi+DISK.SysCache.search_start], 0
and [esi+DISK.AppCache.search_start], 0
mov eax, [esi+DISK.cache_size]
shr eax, 3
mov [esi+DISK.SysCache.data_size], eax
add edx, eax
imul eax, 7
mov [esi+DISK.AppCache.data_size], eax
mov [esi+DISK.AppCache.pointer], edx
mov eax, [esi+DISK.SysCache.data_size]
call calculate_cache_slots
add eax, [esi+DISK.SysCache.pointer]
mov [esi+DISK.SysCache.data], eax
mov [esi+DISK.SysCache.sad_size], ecx
push edi
mov edi, [esi+DISK.SysCache.pointer]
lea ecx, [(ecx+1)*3]
xor eax, eax
rep stosd
pop edi
mov eax, [esi+DISK.AppCache.data_size]
call calculate_cache_slots
add eax, [esi+DISK.AppCache.pointer]
mov [esi+DISK.AppCache.data], eax
mov [esi+DISK.AppCache.sad_size], ecx
push edi
mov edi, [esi+DISK.AppCache.pointer]
lea ecx, [(ecx+1)*3]
xor eax, eax
rep stosd
pop edi
; 5. Return with nonzero al.
mov al, 1
; 6. Return.
.nothing:
ret
; No caching is required for this driver. Zero cache pointers and return with
; nonzero al.
.nocache:
mov [esi+DISK.SysCache.pointer], eax
mov [esi+DISK.AppCache.pointer], eax
mov al, 1
ret
calculate_cache_slots:
push eax
mov ecx, [esi+DISK.MediaInfo.SectorSize]
add ecx, sizeof.CACHE_ITEM
xor edx, edx
div ecx
mov ecx, eax
imul eax, [esi+DISK.MediaInfo.SectorSize]
sub [esp], eax
pop eax
dec ecx
ret
; This internal function is called from disk_media_dereference to free the
; allocated cache, if there is one.
; esi = pointer to DISK structure
disk_free_cache:
; The algorithm is straightforward.
mov eax, [esi+DISK.SysCache.pointer]
test eax, eax
jz .nothing
stdcall kernel_free, eax
.nothing:
ret
; This function flushes all modified data from both caches for the given DISK.
; esi = pointer to DISK
disk_sync:
; The algorithm is straightforward.
cmp [esi+DISK.SysCache.pointer], 0
jz .nothing
lea ecx, [esi+DISK.CacheLock]
call mutex_lock
push ebx
push esi ; for second write_cache64
push esi ; for first write_cache64
lea ebx, [esi+DISK.SysCache]
call write_cache64
add ebx, DISK.AppCache - DISK.SysCache
call write_cache64
pop ebx
lea ecx, [esi+DISK.CacheLock]
call mutex_unlock
.nothing:
mov al, DISKFUNC.flush
call disk_call_driver
ret