kolibrios/kernel/branches/Kolibri-acpi/sec_loader/trunk/loader.asm
Sergey Semyonov (Serge) 3adc7b1d8e acpi:update
git-svn-id: svn://kolibrios.org@3555 a494cfbc-eb01-0410-851d-a64ba20cac60
2013-05-28 19:09:31 +00:00

318 lines
11 KiB
NASM
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

; Copyright (c) 2008-2009, <Lrz>
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions are met:
; * Redistributions of source code must retain the above copyright
; notice, this list of conditions and the following disclaimer.
; * Redistributions in binary form must reproduce the above copyright
; notice, this list of conditions and the following disclaimer in the
; documentation and/or other materials provided with the distribution.
; * Neither the name of the <organization> nor the
; names of its contributors may be used to endorse or promote products
; derived from this software without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY Alexey Teplov nickname <Lrz> ''AS IS'' AND ANY
; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
; DISCLAIMED. IN NO EVENT SHALL <copyright holder> BE LIABLE FOR ANY
; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*****************************************************************************
;start of the project 13.02.2008 year.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;Secondary Loader copyright Alexey Teplov nickname <Lrz>
;if you need log preproc
;/////////////
;include 'listing.inc'
;enable listing
;////////////
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;start of code: ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
use16
org 0x0
jmp start
include 'sl_equ.inc' ; в файле размещены все equ предопределения
include 'boot_st.inc'
include 'debug_msg.inc' ;here is message from debug
include 'parse_dat.inc'
include 'sl_proc.inc'
include 'parse.inc'
include 'parse_loader.inc'
include 'parse_any.inc'
include 'parse_def_sect.inc'
include 'parse_err.inc'
file_data dw 0x0,ini_data_ ;формат: смещение: сегмент т.к. используется les
size_data dw 16 ;16 блоков по 4 кб т.е предел до 64 кб
name_ini_f db 'kord/startos.ini',0
;////////////
loader_callback dd ?
load_drive dw ?
load_ft dw ?
;Start code
start:
; Save far pointer to callback procedure, ds:si is point
mov word [cs:loader_callback], si
mov word [cs:loader_callback+2], ds
; Save type of drive
mov word [cs:load_drive], ax
; Save type of FT
mov word [cs:load_ft], bx
; set up stack
mov ax, cs
mov ss, ax
xor sp, sp
; set up segment registers
mov ds, ax
mov es, ax
; just to be sure: force DF=0, IF=1
cld
sti
; set videomode
mov ax, 3
int 0x10
mov si, version
call printplain
mov al, '#'
mov cx, 80
;input cx=size al=char будет вывден символ сколько раз указано в cx
@@:
call putchar
loop @b
if DEBUG
pushad
mov ax, cs
shl eax, 4 ; в десятичной системе адрес сегмента
mov cx, 0xa
mov di, cseg_msg
call decode
;***************
mov si, cseg_msg
call printplain
popad
end if
if DEBUG
mov si, stack_msg
call printplain
end if
; Require 586 or higher processor (cpuid and rdtsc,rdmsr/wrmsr commands)
; install int 6 (#UD) handler
xor bx, bx
mov ds, bx
push word [bx+6*4+2]
push word [bx+6*4]
mov word [bx+6*4], ud16
mov word [bx+6*4+2], cs
; issue CPUID command
xor eax, eax ; N.B.: will cause #UD before 386
cpuid ; N.B.: will cause #UD before later 486s
test eax, eax
jz cpubad
; get processor features
xor eax, eax
inc ax
cpuid
test dl, 10h ; CPUID[1].edx[4] - TSC support
jz cpubad
test dl, 20h ; CPUID[1].edx[5] - MSR support
jnz cpugood
ud16: ; #UD handler, called if processor did not recognize some commands
cpubad:
; restore int 6 (#UD) handler
pop word [6*4]
pop word [6*4+2]
; say error
push cs
pop ds
mov si, badprocessor
sayerr:
call printplain
jmp $
cpugood:
; restore int 6 (#UD) handler
pop dword [6*4]
push cs
pop ds
; set up esp
movzx esp, sp
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; init memory
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Load startos.ini
mov cx, loop_read_startos_file ;кол-во попыток чтения файла конфигурации startos.ini
align 4
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Load startos.ini ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
load_startos_file:
xor ax, ax
mov di, file_data
inc ax ;function 1 - read file
push cx
call far dword [loader_callback]
pop cx
push cs
push cs
pop ds
pop es
test bx, bx
jz check_conf_file
dec cx
jnz load_startos_file
;SET DEFAULT Not use ini file
error_ini:
mov si, error_ini_f1 ;Error: cannot load ini file, buffer is full
dec bx
jz err_show_ini
mov si, error_ini_f2 ;Error: ini file not found
dec bx
jz err_show_ini
mov si, error_ini_f3 ;Error: cannot read ini file
dec bx
jz err_show_ini
mov si, error_ini_nf ;Error: unrecognized error when loading ini file
err_show_ini:
call printplain
mov si, error_ini_common
call printplain
; wait for keypress
xor ax, ax
int 16h
ini_loaded:
jmp $
align 4
check_conf_file:
;Check config file in current dir
push ax ;save size file
if DEBUG
mov cx, 0x0a
mov di, show_decode
call decode
;Show size
mov si, show_string
call printplain
end if
;Show message
mov si, load_ini
call printplain
pop cx ;restore size file
use_parse ;parsing startos.ini
;
jmp ini_loaded
;;;;;;;;;;;;;;;;;;;;;;;;;;;
;DATA
;;;;;;;;;;;;;;;;;;;;;;;;;;;
; table for move to extended memory (int 15h, ah=87h)
align 4
table_15_87:
db 0x00,0x00,0x0,0x00,0x00,0x00,0x0,0x0
db 0x00,0x00,0x0,0x00,0x00,0x00,0x0,0x0
db 0xff,0xff
db 0x0,0x10
db 0x00,0x93,0x0,0x0
db 0xff,0xff,0x0,0x00,0x10,0x93,0x0,0x0
db 0x00,0x00,0x0,0x00,0x00,0x00,0x0,0x0
db 0x00,0x00,0x0,0x00,0x00,0x00,0x0,0x0
db 0x00,0x00,0x0,0x00,0x00,0x00,0x0,0x0
db 0x00,0x00,0x0,0x00,0x00,0x00,0x0,0x0
fat12_buffer:
.BS_jmpBoot db 0x90,0x90,0x90 ;3 байта NOP инструкция - ничего не делать
.BS_OEMName db 'K SyS 64' ;8 байт
.BPB_BytsPerSec dw 512 ;кол-во байтов в секторе может быть любое 512 1024 2048 4096 2 байта
.BPB_SecPerClus db 0x1 ;кол-во секторов в кластере
.BPB_RsvdSecCnt dw 0x1 ;для FAt12/16 только 1, для FAT32 обычно 32
.BPB_NumFATs db 0x1 ;кол-во фат таблиц, на тот случай если будет сброс на дискету образа рам диска
.BPB_RootEntCnt dw 512 ;для мак совместимости с fat16
.BPB_TotSec16 dw 0x0 ;кл-во секторов
.BPB_Media db 0xF0
.BPB_FATSz16 dw 0x0
.BPB_SecPerTrk dw 0x0 ;содержит геометрию диска для RAMFS на как бы без разницы, пока пустое поле, позже внести реальные значения.
.BPB_NumHeads dw 0x0
.BPB_HiddSec dd 0x0 ;кол-во скрытых секторов
.BPB_TotSec32 dd 0x0
.BS_DrvNum db 'R' ;от слова RAM
.BS_Reserved1 db 0x0
.BS_BootSig db 0x29
.BS_VolID db 'RFKS'
.BS_VolLab db 'RAM DISK FS' ;11 символов
.BS_FilSysType db 'FAT12 ' ;8 символов
;62 байта структура fat12.
db (512-($-fat12_buffer))dup(0x90)
;структура для дирректории fat
struc FAT_32_entry ;Byte Directory Entry Structure
{
.DIR_Name rb 11
.DIR_Attr db ?
.DIR_NTRes db ?
.DIR_CrtTimeTenth db ?
.DIR_CrtTime dw ?
.DIR_CrtDate dw ?
.DIR_LstAccDate dw ?
.DIR_FstClusHI dw ?
.DIR_WrtTime dw ?
.DIR_WrtDate dw ?
.DIR_FstClusLO dw ?
.DIR_FileSize dd ?
}
;Тут будут распологатсья данные, которые затруднительно распологать в стековой области....
;;;
;timer
shot_name_fat rb 11 ;временный буфер для fat12, в нем храняться имена файлов приведенные к правилам FAT /* вдальнейшем перенести в стэк
if DEBUG
rb 1 ;нужен для отладки и вывода имени файла после преобразования
dest_name_fat db 24 dup('_');12
db 0x0
end if
value_timeout rw 1 ;value to timeout
old_timer rd 1 ;старое значение вектора таймера
start_timer rd 1 ;значение таймера
timer_ rd 1 ;новое значение вектора таймера т.е. SL
start_stack rw 1 ;save stack
save_bp_from_timer rw 1 ;save bp from timer