kolibrios/kernel/branches/kolibri-lldw/bus/pci/PCIe.inc

120 lines
4.4 KiB
PHP
Raw Normal View History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2010-2015. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; ;;
;; PCIe.INC ;;
;; ;;
;; Extended PCI express services ;;
;; ;;
;; art_zh <artem@jerdev.co.uk> ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
;***************************************************************************
; Function
; pci_ext_config:
;
; Description
; PCIe extended (memory-mapped) config space detection
;
; WARNINGs:
; 1) Very Experimental!
; 2) direct HT-detection (no ACPI or BIOS service used)
; 3) Only AMD/HT processors currently supported
;
;***************************************************************************
PCIe_CONFIG_SPACE = 0xF0000000 ; to be moved to const.inc
mmio_pcie_cfg_addr dd 0x0 ; intel pcie space may be defined here
mmio_pcie_cfg_lim dd 0x0 ; upper pcie space address
align 4
pci_ext_config:
mov ebx, [mmio_pcie_cfg_addr]
or ebx, ebx
jz @f
or ebx, 0x7FFFFFFF ; required by PCI-SIG standards
jnz .pcie_failed
add ebx, 0x0FFFFC
cmp ebx, [mmio_pcie_cfg_lim]; is the space limit correct?
ja .pcie_failed
jmp .pcie_cfg_mapped
@@:
mov ebx, [cpu_vendor]
cmp ebx, dword [AMD_str]
jne .pcie_failed
mov bx, 0xC184 ; dev = 24, fn = 01, reg = 84h
.check_HT_mmio:
mov cx, bx
mov ax, 0x0002 ; bus = 0, 1dword to read
call pci_read_reg
mov bx, cx
sub bl, 4
and al, 0x80 ; check the NP bit
jz .no_pcie_cfg
shl eax, 8 ; bus:[27..20], dev:[19:15]
or eax, 0x00007FFC ; fun:[14..12], reg:[11:2]
mov [mmio_pcie_cfg_lim], eax
mov cl, bl
mov ax, 0x0002 ; bus = 0, 1dword to read
call pci_read_reg
mov bx, cx
test al, 0x03 ; MMIO Base RW enabled?
jz .no_pcie_cfg
test al, 0x0C ; MMIO Base locked?
jnz .no_pcie_cfg
xor al, al
shl eax, 8
test eax, 0x000F0000 ; MMIO Base must be bus0-aligned
jnz .no_pcie_cfg
mov [mmio_pcie_cfg_addr], eax
add eax, 0x000FFFFC
sub eax, [mmio_pcie_cfg_lim]; MMIO must cover at least one bus
ja .no_pcie_cfg
; -- it looks like a true PCIe config space;
mov eax, [mmio_pcie_cfg_addr] ; physical address
or eax, (PG_SHARED + PG_LARGE + PG_USER)
mov ebx, PCIe_CONFIG_SPACE ; linear address
mov ecx, ebx
shr ebx, 20
add ebx, sys_pgdir ; PgDir entry @
@@:
mov dword[ebx], eax ; map 4 buses
invlpg [ecx]
cmp bl, 4
jz .pcie_cfg_mapped ; fix it later
add bl, 4 ; next PgDir entry
add eax, 0x400000 ; eax += 4M
add ecx, 0x400000
jmp @b
.pcie_cfg_mapped:
; -- glad to have the extended PCIe config field found
; mov esi, boot_pcie_ok
; call boot_log
ret ; <<<<<<<<<<< OK >>>>>>>>>>>
.no_pcie_cfg:
xor eax, eax
mov [mmio_pcie_cfg_addr], eax
mov [mmio_pcie_cfg_lim], eax
add bl, 12
cmp bl, 0xC0 ; MMIO regs lay below this offset
jb .check_HT_mmio
.pcie_failed:
; mov esi, boot_pcie_fail
; call boot_log
ret ; <<<<<<<<< FAILURE >>>>>>>>>