kolibrios/kernel/trunk/detect/init_ata.inc
Marat Zakiyanov (Mario79) 28e8a442bf IDE DMA
1) No more 16-bit code, all the code in 32-bit mode
2) Expansion of the data output about modes of IDE devices

git-svn-id: svn://kolibrios.org@4624 a494cfbc-eb01-0410-851d-a64ba20cac60
2014-03-10 00:09:59 +00:00

268 lines
8.8 KiB
PHP

;-----------------------------------------------------------------------------
; find the IDE controller in the device list
;-----------------------------------------------------------------------------
mov esi, pcidev_list
.loop:
mov esi, [esi+PCIDEV.fd]
cmp esi, pcidev_list
jz .done
mov eax, [esi+PCIDEV.class]
shr eax, 4
cmp eax, 0x01018
jnz .loop
.found:
mov eax, [esi+PCIDEV.class]
DEBUGF 1, 'K : IDE controller programming interface %x\n', eax
mov [IDEContrProgrammingInterface], eax
mov ah, [esi+PCIDEV.bus]
mov al, 2
mov bh, [esi+PCIDEV.devfn]
;-----------------------------------------------------------------------------
mov bl, 0x10
push eax
call pci_read_reg
and eax, 0xFFFC
cmp ax, 0
je @f
cmp ax, 1
jne .show_BAR0
@@:
mov ax, 0x1F0
.show_BAR0:
DEBUGF 1, 'K : BAR0 IDE base addr %x\n', ax
mov [StandardATABases], ax
mov [hd_address_table], eax
mov [hd_address_table+8], eax
mov [IDE_BAR0_val], ax
pop eax
;-----------------------------------------------------------------------------
mov bl, 0x14
push eax
call pci_read_reg
and eax, 0xFFFC
cmp ax, 0
je @f
cmp ax, 1
jne .show_BAR1
@@:
mov ax, 0x3F4
.show_BAR1:
DEBUGF 1, 'K : BAR1 IDE base addr %x\n', ax
mov [IDE_BAR1_val], ax
pop eax
;-----------------------------------------------------------------------------
mov bl, 0x18
push eax
call pci_read_reg
and eax, 0xFFFC
cmp ax, 0
je @f
cmp ax, 1
jne .show_BAR2
@@:
mov ax, 0x170
.show_BAR2:
DEBUGF 1, 'K : BAR2 IDE base addr %x\n', ax
mov [StandardATABases+2], ax
mov [hd_address_table+16], eax
mov [hd_address_table+24], eax
mov [IDE_BAR2_val], ax
pop eax
;-----------------------------------------------------------------------------
mov bl, 0x1C
push eax
call pci_read_reg
and eax, 0xFFFC
cmp ax, 0
je @f
cmp ax, 1
jne .show_BAR3
@@:
mov ax, 0x374
.show_BAR3:
DEBUGF 1, 'K : BAR3 IDE base addr %x\n', ax
mov [IDE_BAR3_val], ax
pop eax
;-----------------------------------------------------------------------------
mov bl, 0x20
push eax
call pci_read_reg
and eax, 0xFFFC
DEBUGF 1, 'K : BAR4 IDE controller register base addr %x\n', ax
mov [IDEContrRegsBaseAddr], ax
pop eax
;-----------------------------------------------------------------------------
mov bl, 0x3C
push eax
call pci_read_reg
and eax, 0xFF
DEBUGF 1, 'K : IDE Interrupt %x\n', al
mov [IDE_Interrupt], ax
pop eax
;-----------------------------------------------------------------------------
.done:
;-----------------------------------------------------------------------------
; START of initialisation IDE ATA code
;-----------------------------------------------------------------------------
cmp [IDEContrProgrammingInterface], 0
je set_interrupts_for_IDE_controllers.continue
mov esi, boot_disabling_ide
call boot_log
;--------------------------------------
; Disable IDE interrupts, because the search
; for IDE partitions is in the PIO mode.
;--------------------------------------
.disable_IDE_interrupt:
; Disable interrupts in IDE controller for PIO
mov al, 2
mov dx, [IDE_BAR1_val] ;0x3F4
add dx, 2 ;0x3F6
out dx, al
mov dx, [IDE_BAR3_val] ;0x374
add dx, 2 ;0x376
out dx, al
@@:
; show base variables of IDE controller
; DEBUGF 1, "K : BAR0 %x \n", [IDE_BAR0_val]:4
; DEBUGF 1, "K : BAR1 %x \n", [IDE_BAR1_val]:4
; DEBUGF 1, "K : BAR2 %x \n", [IDE_BAR2_val]:4
; DEBUGF 1, "K : BAR3 %x \n", [IDE_BAR3_val]:4
; DEBUGF 1, "K : BAR4 %x \n", [IDEContrRegsBaseAddr]:4
; DEBUGF 1, "K : IDEContrProgrammingInterface %x \n", [IDEContrProgrammingInterface]:4
; DEBUGF 1, "K : IDE_Interrupt %x \n", [IDE_Interrupt]:4
;-----------------------------------------------------------------------------
mov esi, boot_detecthdcd
call boot_log
include 'detect/dev_hdcd.inc'
mov esi, boot_getcache
call boot_log
include 'detect/getcache.inc'
mov esi, boot_detectpart
call boot_log
include 'detect/sear_par.inc'
;-----------------------------------------------------------------------------
mov dx, [IDEContrRegsBaseAddr]
; test whether it is our interrupt?
add dx, 2
in al, dx
test al, 100b
jz @f
; clear Bus Master IDE Status register
; clear Interrupt bit
out dx, al
@@:
add dx, 8
; test whether it is our interrupt?
in al, dx
test al, 100b
jz @f
; clear Bus Master IDE Status register
; clear Interrupt bit
out dx, al
@@:
; read status register and remove the interrupt request
mov dx, [IDE_BAR0_val] ;0x1F0
add dx, 0x7 ;0x1F7
in al, dx
mov dx, [IDE_BAR2_val] ;0x170
add dx, 0x7 ;0x177
in al, dx
;-----------------------------------------------------------------------------
push eax edx
mov dx, [IDEContrRegsBaseAddr]
xor eax, eax
add dx, 2
in al, dx
DEBUGF 1, "K : Primary Bus Master IDE Status Register %x\n", eax
add dx, 8
in al, dx
DEBUGF 1, "K : Secondary Bus Master IDE Status Register %x\n", eax
pop edx eax
cmp [IDEContrRegsBaseAddr], 0
setnz [dma_hdd]
;-----------------------------------------------------------------------------
; set interrupts for IDE Controller
;-----------------------------------------------------------------------------
mov esi, boot_set_int_IDE
call boot_log
set_interrupts_for_IDE_controllers:
mov eax, [IDEContrProgrammingInterface]
cmp ax, 0x0180
je .pata_ide
cmp ax, 0x018a
jne .sata_ide
;--------------------------------------
.pata_ide:
cmp [IDEContrRegsBaseAddr], 0
je .end_set_interrupts
stdcall attach_int_handler, 14, IDE_irq_14_handler, 0
DEBUGF 1, "K : Set IDE IRQ14 return code %x\n", eax
stdcall attach_int_handler, 15, IDE_irq_15_handler, 0
DEBUGF 1, "K : Set IDE IRQ15 return code %x\n", eax
jmp .enable_IDE_interrupt
;--------------------------------------
.sata_ide:
cmp ax, 0x0185
je .sata_ide_1
cmp ax, 0x018f
jne .end_set_interrupts
;--------------------------------------
.sata_ide_1:
cmp [IDEContrRegsBaseAddr], 0
je .end_set_interrupts
mov ax, [IDE_Interrupt]
movzx eax, al
stdcall attach_int_handler, eax, IDE_common_irq_handler, 0
DEBUGF 1, "K : Set IDE IRQ%d return code %x\n", [IDE_Interrupt]:1, eax
;--------------------------------------
.enable_IDE_interrupt:
mov esi, boot_enabling_ide
call boot_log
; Enable interrupts in IDE controller for DMA
mov al, 0
mov ah, [DRIVE_DATA+1]
test ah, 10100000b
jz @f
DEBUGF 1, "K : IDE CH1 PIO, because ATAPI drive present\n"
jmp .ch2_check
@@:
mov dx, [IDE_BAR1_val] ;0x3F4
add dx, 2 ;0x3F6
out dx, al
DEBUGF 1, "K : IDE CH1 DMA enabled\n"
.ch2_check:
test ah, 1010b
jz @f
DEBUGF 1, "K : IDE CH2 PIO, because ATAPI drive present\n"
jmp .end_set_interrupts
@@:
mov dx, [IDE_BAR3_val] ;0x374
add dx, 2 ;0x376
out dx, al
DEBUGF 1, "K : IDE CH2 DMA enabled\n"
;--------------------------------------
.end_set_interrupts:
;-----------------------------------------------------------------------------
cmp [dma_hdd], 0
je .print_pio
.print_dma:
DEBUGF 1, "K : IDE DMA mode\n"
jmp .continue
.print_pio:
DEBUGF 1, "K : IDE PIO mode\n"
.continue:
;-----------------------------------------------------------------------------
; END of initialisation IDE ATA code
;-----------------------------------------------------------------------------