kolibrios/kernel/branches/net/drivers/pcnet32.asm

1673 lines
41 KiB
NASM
Raw Normal View History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;; Status: under construction ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
format MS COFF
API_VERSION equ 0x01000100
DEBUG equ 1
__DEBUG__ equ 1
__DEBUG_LEVEL__ equ 1
MAX_PCNET equ 4
MAX_ETH_FRAME_SIZE equ 1514
include 'proc32.inc'
include 'imports.inc'
include 'fdo.inc'
OS_BASE equ 0;
new_app_base equ 0x60400000
PROC_BASE equ OS_BASE+0x0080000
public START
public service_proc
public version
struc IOCTL {
.handle dd ?
.io_code dd ?
.input dd ?
.inp_size dd ?
.output dd ?
.out_size dd ?
}
virtual at 0
IOCTL IOCTL
end virtual
struc ETH_DEVICE {
; pointers to procedures
.unload dd ?
.reset dd ?
.transmit dd ?
.set_MAC dd ?
.get_MAC dd ?
.set_mode dd ?
.get_mode dd ?
; status
.bytes_tx dq ?
.bytes_rx dq ?
.packets_tx dd ?
.packets_rx dd ?
.mode dd ? ; This dword contains cable status (10mbit/100mbit, full/half duplex, auto negotiation or not,..)
.name dd ?
.mac dp ?
; device specific
.rx_buffer dd ?
.tx_buffer dd ?
.io_addr dd ?
.irq_line db ?
.pci_bus db ?
.pci_dev db ?
; The following fields up to .tx_ring_phys inclusive form
; initialization block for hardware; do not modify
align 4 ; initialization block must be dword-aligned
.private:
.mode_ dw ?
.tlen_rlen dw ?
.phys_addr dp ?
.reserved dw ?
.filter dq ?
.rx_ring_phys dd ?
.tx_ring_phys dd ?
.rx_ring dd ?
.tx_ring dd ?
.cur_rx db ?
.cur_tx db ?
.dirty_rx dd ?
.dirty_tx dd ?
.tx_full db ?
.options dd ?
.full_duplex db ?
.chip_version dd ?
.mii db ?
.ltint db ?
.dxsuflo db ?
.fset db ?
.fdx db ?
.access_read_csr dd ?
.access_write_csr dd ?
.access_read_bcr dd ?
.access_write_bcr dd ?
.access_read_rap dd ?
.access_write_rap dd ?
.access_reset dd ?
.size:
}
virtual at 0
device ETH_DEVICE
end virtual
struc buf_head {
.base dd ?
.length dw ?
.status dw ?
.msg_length dw ?
.misc dw ?
.reserved dd ?
.size:
}
virtual at 0
buf_head buf_head
end virtual
struc rx_desc_2 { ; Swstyle 2
.rbadr dd ?
.status dd ?
.rfrtag dd ?
; +--------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
; |Address | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 |19-16|15-12|11-0 |
; +--------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
; |CRDA+00h| RBADR[31:0] |
; +--------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
; |CRDA+04h| OWN | ERR |FRAM |OFLO | CRC |BUFF | STP | ENP | BPE | PAM |LAFM | BAM | RES |1111 |BCNT |
; +--------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
; |CRDA+08h| RES | RFRTAG[14:0] |0000 |MCNT |
; +--------+-----+-----------------------------------------------------------------------+-----+-----+
; |CRDA+0Ch| USER SPACE | | |
; +--------+-----------------------------------------------------------------------------+-----+-----+
}
struc rx_desc_3 { ; Swstyle 3
.mcnt dd ?
.status dd ?
.rbadr dd ?
; +--------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
; |Address | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 |22-16|15-12|11-0 |
; +--------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
; |CRDA+00h| RES | RES | RES |0000 |MCNT |
; +--------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
; |CRDA+04h| OWN | ERR |FRAM |OFLO | CRC |BUFF | STP | ENP | BPE | RES |1111 |BCNT |
; +--------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
; |CRDA+08h| RBADR[31:0] |
; +--------+-----------------------------------------------------------------------+
; |CRDA+0Ch| USER SPACE |
; +--------+-----------------------------------------------------------------------+
}
virtual at 0
rx_desc rx_desc_2
end virtual
; PCI Bus defines
PCI_HEADER_TYPE equ 0x0e ;8 bit
PCI_BASE_ADDRESS_0 equ 0x10 ;32 bit
PCI_BASE_ADDRESS_5 equ 0x24 ;32 bits
PCI_BASE_ADDRESS_SPACE_IO equ 0x01
PCI_VENDOR_ID equ 0x00 ;16 bit
PCI_BASE_ADDRESS_IO_MASK equ 0xFFFFFFFC
PCNET_PORT_AUI equ 0x00
PCNET_PORT_10BT equ 0x01
PCNET_PORT_GPSI equ 0x02
PCNET_PORT_MII equ 0x03
PCNET_PORT_PORTSEL equ 0x03
PCNET_PORT_ASEL equ 0x04
PCNET_PORT_100 equ 0x40
PCNET_PORT_FD equ 0x80
PCNET_DMA_MASK equ 0xffffffff
PCNET_LOG_TX_BUFFERS equ 2
PCNET_LOG_RX_BUFFERS equ 2
PCNET_TX_RING_SIZE equ 4
PCNET_TX_RING_MOD_MASK equ (PCNET_TX_RING_SIZE-1)
PCNET_TX_RING_LEN_BITS equ (PCNET_LOG_TX_BUFFERS shl 12)
PCNET_RX_RING_SIZE equ 4
PCNET_RX_RING_MOD_MASK equ (PCNET_RX_RING_SIZE-1)
PCNET_RX_RING_LEN_BITS equ (PCNET_LOG_RX_BUFFERS shl 4)
PCNET_PKT_BUF_SZ equ 1544
PCNET_PKT_BUF_SZ_NEG equ 0xf9f8
PCNET_WIO_RDP equ 0x10
PCNET_WIO_RAP equ 0x12
PCNET_WIO_RESET equ 0x14
PCNET_WIO_BDP equ 0x16
PCNET_DWIO_RDP equ 0x10
PCNET_DWIO_RAP equ 0x14
PCNET_DWIO_RESET equ 0x18
PCNET_DWIO_BDP equ 0x1C
PCNET_TOTAL_SIZE equ 0x20
; CSR registers
PCNET_CSR_CSR equ 0x00
PCNET_CSR_IAB0 equ 0x01
PCNET_CSR_IAB1 equ 0x02
PCNET_CSR_IMR equ 0x03
PCNET_CSR_TFEAT equ 0x04
PCNET_CSR_EXTCTL1 equ 0x05
PCNET_CSR_DTBLLEN equ 0x06
PCNET_CSR_EXTCTL2 equ 0x07
PCNET_CSR_MAR0 equ 0x08
PCNET_CSR_MAR1 equ 0x09
PCNET_CSR_MAR2 equ 0x0A
PCNET_CSR_MAR3 equ 0x0B
PCNET_CSR_PAR0 equ 0x0C
PCNET_CSR_PAR1 equ 0x0D
PCNET_CSR_PAR2 equ 0x0E
PCNET_CSR_MODE equ 0x0F
PCNET_CSR_RXADDR0 equ 0x18
PCNET_CSR_RXADDR1 equ 0x19
PCNET_CSR_TXADDR0 equ 0x1E
PCNET_CSR_TXADDR1 equ 0x1F
PCNET_CSR_TXPOLL equ 0x2F
PCNET_CSR_RXPOLL equ 0x31
PCNET_CSR_RXRINGLEN equ 0x4C
PCNET_CSR_TXRINGLEN equ 0x4E
PCNET_CSR_DMACTL equ 0x50
PCNET_CSR_BUSTIMER equ 0x52
PCNET_CSR_MEMERRTIMEO equ 0x64
PCNET_CSR_ONNOWMISC equ 0x74
PCNET_CSR_ADVFEAT equ 0x7A
PCNET_CSR_MACCFG equ 0x7D
PCNET_CSR_CHIPID0 equ 0x58
PCNET_CSR_CHIPID1 equ 0x59
; Control and Status Register (CSR0)
PCNET_CSR_INIT equ 1 shl 0
PCNET_CSR_START equ 1 shl 1
PCNET_CSR_STOP equ 1 shl 2
PCNET_CSR_TX equ 1 shl 3
PCNET_CSR_TXON equ 1 shl 4
PCNET_CSR_RXON equ 1 shl 5
PCNET_CSR_INTEN equ 1 shl 6
PCNET_CSR_INTR equ 1 shl 7
PCNET_CSR_IDONE equ 1 shl 8
PCNET_CSR_TINT equ 1 shl 9
PCNET_CSR_RINT equ 1 shl 10
PCNET_CSR_MERR equ 1 shl 11
PCNET_CSR_MISS equ 1 shl 12
PCNET_CSR_CERR equ 1 shl 13
; Interrupt masks and deferral control (CSR3)
PCNET_IMR_BSWAP equ 0x0004
PCNET_IMR_ENMBA equ 0x0008 ; enable modified backoff alg
PCNET_IMR_DXMT2PD equ 0x0010
PCNET_IMR_LAPPEN equ 0x0020 ; lookahead packet processing enb
PCNET_IMR_DXSUFLO equ 0x0040 ; disable TX stop on underflow
PCNET_IMR_IDONE equ 0x0100
PCNET_IMR_TINT equ 0x0200
PCNET_IMR_RINT equ 0x0400
PCNET_IMR_MERR equ 0x0800
PCNET_IMR_MISS equ 0x1000
PCNET_IMR equ PCNET_IMR_TINT+PCNET_IMR_RINT+PCNET_IMR_IDONE+PCNET_IMR_MERR+PCNET_IMR_MISS
; Test and features control (CSR4)
PCNET_TFEAT_TXSTRTMASK equ 0x0004
PCNET_TFEAT_TXSTRT equ 0x0008
PCNET_TFEAT_RXCCOFLOWM equ 0x0010 ; Rx collision counter oflow
PCNET_TFEAT_RXCCOFLOW equ 0x0020
PCNET_TFEAT_UINT equ 0x0040
PCNET_TFEAT_UINTREQ equ 0x0080
PCNET_TFEAT_MISSOFLOWM equ 0x0100
PCNET_TFEAT_MISSOFLOW equ 0x0200
PCNET_TFEAT_STRIP_FCS equ 0x0400
PCNET_TFEAT_PAD_TX equ 0x0800
PCNET_TFEAT_TXDPOLL equ 0x1000
PCNET_TFEAT_DMAPLUS equ 0x4000
; Extended control and interrupt 1 (CSR5)
PCNET_EXTCTL1_SPND equ 0x0001 ; suspend
PCNET_EXTCTL1_MPMODE equ 0x0002 ; magic packet mode
PCNET_EXTCTL1_MPENB equ 0x0004 ; magic packet enable
PCNET_EXTCTL1_MPINTEN equ 0x0008 ; magic packet interrupt enable
PCNET_EXTCTL1_MPINT equ 0x0010 ; magic packet interrupt
PCNET_EXTCTL1_MPPLBA equ 0x0020 ; magic packet phys. logical bcast
PCNET_EXTCTL1_EXDEFEN equ 0x0040 ; excessive deferral interrupt enb.
PCNET_EXTCTL1_EXDEF equ 0x0080 ; excessive deferral interrupt
PCNET_EXTCTL1_SINTEN equ 0x0400 ; system interrupt enable
PCNET_EXTCTL1_SINT equ 0x0800 ; system interrupt
PCNET_EXTCTL1_LTINTEN equ 0x4000 ; last TX interrupt enb
PCNET_EXTCTL1_TXOKINTD equ 0x8000 ; TX OK interrupt disable
; RX/TX descriptor len (CSR6)
PCNET_DTBLLEN_RLEN equ 0x0F00
PCNET_DTBLLEN_TLEN equ 0xF000
; Extended control and interrupt 2 (CSR7)
PCNET_EXTCTL2_MIIPDTINTE equ 0x0001
PCNET_EXTCTL2_MIIPDTINT equ 0x0002
PCNET_EXTCTL2_MCCIINTE equ 0x0004
PCNET_EXTCTL2_MCCIINT equ 0x0008
PCNET_EXTCTL2_MCCINTE equ 0x0010
PCNET_EXTCTL2_MCCINT equ 0x0020
PCNET_EXTCTL2_MAPINTE equ 0x0040
PCNET_EXTCTL2_MAPINT equ 0x0080
PCNET_EXTCTL2_MREINTE equ 0x0100
PCNET_EXTCTL2_MREINT equ 0x0200
PCNET_EXTCTL2_STINTE equ 0x0400
PCNET_EXTCTL2_STINT equ 0x0800
PCNET_EXTCTL2_RXDPOLL equ 0x1000
PCNET_EXTCTL2_RDMD equ 0x2000
PCNET_EXTCTL2_RXFRTG equ 0x4000
PCNET_EXTCTL2_FASTSPNDE equ 0x8000
; Mode (CSR15)
PCNET_MODE_RXD equ 0x0001 ; RX disable
PCNET_MODE_TXD equ 0x0002 ; TX disable
PCNET_MODE_LOOP equ 0x0004 ; loopback enable
PCNET_MODE_TXCRCD equ 0x0008
PCNET_MODE_FORCECOLL equ 0x0010
PCNET_MODE_RETRYD equ 0x0020
PCNET_MODE_INTLOOP equ 0x0040
PCNET_MODE_PORTSEL equ 0x0180
PCNET_MODE_RXVPAD equ 0x2000
PCNET_MODE_RXNOBROAD equ 0x4000
PCNET_MODE_PROMISC equ 0x8000
; BCR (Bus Control Registers)
PCNET_BCR_MMRA equ 0x00 ; Master Mode Read Active
PCNET_BCR_MMW equ 0x01 ; Master Mode Write Active
PCNET_BCR_MISCCFG equ 0x02
PCNET_BCR_LED0 equ 0x04
PCNET_BCR_LED1 equ 0x05
PCNET_BCR_LED2 equ 0x06
PCNET_BCR_LED3 equ 0x07
PCNET_BCR_DUPLEX equ 0x09
PCNET_BCR_BUSCTL equ 0x12
PCNET_BCR_EECTL equ 0x13
PCNET_BCR_SSTYLE equ 0x14
PCNET_BCR_PCILAT equ 0x16
PCNET_BCR_PCISUBVENID equ 0x17
PCNET_BCR_PCISUBSYSID equ 0x18
PCNET_BCR_SRAMSIZE equ 0x19
PCNET_BCR_SRAMBOUND equ 0x1A
PCNET_BCR_SRAMCTL equ 0x1B
PCNET_BCR_MIICTL equ 0x20
PCNET_BCR_MIIADDR equ 0x21
PCNET_BCR_MIIDATA equ 0x22
PCNET_BCR_PCIVENID equ 0x23
PCNET_BCR_PCIPCAP equ 0x24
PCNET_BCR_DATA0 equ 0x25
PCNET_BCR_DATA1 equ 0x26
PCNET_BCR_DATA2 equ 0x27
PCNET_BCR_DATA3 equ 0x28
PCNET_BCR_DATA4 equ 0x29
PCNET_BCR_DATA5 equ 0x2A
PCNET_BCR_DATA6 equ 0x2B
PCNET_BCR_DATA7 equ 0x2C
PCNET_BCR_ONNOWPAT0 equ 0x2D
PCNET_BCR_ONNOWPAT1 equ 0x2E
PCNET_BCR_ONNOWPAT2 equ 0x2F
PCNET_BCR_PHYSEL equ 0x31
; RX status register
PCNET_RXSTAT_BPE equ 0x0080 ; bus parity error
PCNET_RXSTAT_ENP equ 0x0100 ; end of packet
PCNET_RXSTAT_STP equ 0x0200 ; start of packet
PCNET_RXSTAT_BUFF equ 0x0400 ; buffer error
PCNET_RXSTAT_CRC equ 0x0800 ; CRC error
PCNET_RXSTAT_OFLOW equ 0x1000 ; rx overrun
PCNET_RXSTAT_FRAM equ 0x2000 ; framing error
PCNET_RXSTAT_ERR equ 0x4000 ; error summary
PCNET_RXSTAT_OWN equ 0x8000
; TX status register
PCNET_TXSTAT_TRC equ 0x0000000F ; transmit retries
PCNET_TXSTAT_RTRY equ 0x04000000 ; retry
PCNET_TXSTAT_LCAR equ 0x08000000 ; lost carrier
PCNET_TXSTAT_LCOL equ 0x10000000 ; late collision
PCNET_TXSTAT_EXDEF equ 0x20000000 ; excessive deferrals
PCNET_TXSTAT_UFLOW equ 0x40000000 ; transmit underrun
PCNET_TXSTAT_BUFF equ 0x80000000 ; buffer error
PCNET_TXCTL_OWN equ 0x80000000
PCNET_TXCTL_ERR equ 0x40000000 ; error summary
PCNET_TXCTL_ADD_FCS equ 0x20000000 ; add FCS to pkt
PCNET_TXCTL_MORE_LTINT equ 0x10000000
PCNET_TXCTL_ONE equ 0x08000000
PCNET_TXCTL_DEF equ 0x04000000
PCNET_TXCTL_STP equ 0x02000000
PCNET_TXCTL_ENP equ 0x01000000
PCNET_TXCTL_BPE equ 0x00800000
PCNET_TXCTL_MBO equ 0x0000F000
PCNET_TXCTL_BUFSZ equ 0x00000FFF
section '.flat' code readable align 16
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc START ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc START stdcall, state:dword
cmp [state], 1
jne .exit
.entry:
DEBUGF 1,"Loading PCnet driver\n"
stdcall RegService, my_service, service_proc
ret
.fail:
.exit:
xor eax, eax
ret
endp
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc SERVICE_PROC ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
proc service_proc stdcall, ioctl:dword
mov edx, [ioctl]
mov eax, [ebx+IOCTL.io_code]
;------------------------------------------------------
cmp eax, 0 ;SRV_GETVERSION
jne @F
cmp [edx+IOCTL.out_size], 4
jl .fail
mov eax, [edx+IOCTL.output]
mov [eax], dword API_VERSION
xor eax, eax
ret
;------------------------------------------------------
@@:
cmp eax, 1 ;SRV_HOOK
jne .fail
mov eax, [esp]
cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes
jl .fail
mov eax, [edx + IOCTL.input]
cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given
jne .fail ; other types arent supported for this card yet
; check if the device is already listed
mov esi, PCNET_LIST
mov ecx, [PCNET_DEV]
test ecx, ecx
jz .firstdevice
mov eax, [edx+IOCTL.input] ; get the pci bus and device numbers
mov bx , [eax+1] ;
.nextdevice:
lodsd
cmp bx , word [eax + device.pci_bus] ; compare with pci and device num in RTL8139 list (notice the usage of word instead of byte)
je .find_devicenum ; Device is already loaded, let's find it's device number
loop .nextdevice
; This device doesnt have its own eth_device structure yet, lets create one
.firstdevice:
cmp [PCNET_DEV], MAX_PCNET ; First check if the driver can handle one more card
jge .fail
push edx
stdcall KernelAlloc, device.size ; Allocate the buffer for eth_device structure
pop edx
test eax, eax
jz .fail
mov ebx, eax ; ebx is always used as a pointer to the structure (in driver, but also in kernel code)
; Fill in the direct call addresses into the struct
mov dword [ebx+device.reset], reset
mov dword [ebx+device.transmit], transmit
mov dword [ebx+device.get_MAC], read_mac
mov dword [ebx+device.set_MAC], write_mac
mov dword [ebx+device.unload], unload
mov dword [ebx+device.name], my_service
; save the pci bus and device numbers
mov eax, [edx+IOCTL.input]
mov cl , [eax+1]
mov [ebx+device.pci_bus], cl
mov cl , [eax+2]
mov [ebx+device.pci_dev], cl
; Now, it's time to find the base io addres of the PCI device
; TODO: implement check if bus and dev exist on this machine
mov edx, PCI_BASE_ADDRESS_0
.reg_check:
movzx eax, byte [ebx+device.pci_bus]
movzx ecx, byte [ebx+device.pci_dev]
push edx ecx
stdcall PciRead16, eax ,ecx ,edx
pop ecx edx
mov [ebx+device.io_addr], eax
and eax, PCI_BASE_ADDRESS_IO_MASK
test eax, eax
jz .inc_reg
mov eax, [ebx+device.io_addr]
and eax, PCI_BASE_ADDRESS_SPACE_IO
test eax, eax
jz .inc_reg
mov eax, [ebx+device.io_addr]
and eax, PCI_BASE_ADDRESS_IO_MASK
mov [ebx+device.io_addr], eax
jmp .got_io
.inc_reg:
add edx, 4
cmp edx, PCI_BASE_ADDRESS_5
jbe .reg_check
.got_io:
; We've found the io address, find IRQ now
movzx eax, byte [ebx+device.pci_bus]
movzx ecx, byte [ebx+device.pci_dev]
push ebx
stdcall PciRead8, eax ,ecx ,0x3c ; 0x3c is the offset where irq can be found
pop ebx
mov byte [ebx+device.irq_line], al
DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\
[ebx+device.pci_dev]:1,[ebx+device.pci_bus]:1,[ebx+device.irq_line]:1,[ebx+device.io_addr]:4
; Allocate the Receive buffer
stdcall KernelAlloc, PCNET_RX_RING_SIZE * PCNET_PKT_BUF_SZ
test eax, eax
jz .err
mov [ebx+device.rx_buffer], eax ; Save the address to it into the device struct
; Allocate the Transmit Buffer
stdcall KernelAlloc, PCNET_TX_RING_SIZE * PCNET_PKT_BUF_SZ
test eax, eax
jz .err
mov [ebx+device.tx_buffer], eax
; Allocate the RX Ring
stdcall KernelAlloc, PCNET_RX_RING_SIZE * buf_head.size
test eax, eax
jz .err
mov dword [ebx + device.rx_ring], eax
call GetPgAddr
mov dword [ebx + device.rx_ring_phys], eax
; Allocate the TX ring
stdcall KernelAlloc, PCNET_TX_RING_SIZE * buf_head.size
test eax, eax
jz .err
mov dword [ebx + device.tx_ring], eax
call GetPgAddr
mov dword [ebx + device.tx_ring_phys], eax
; fill in some of the structure variables
call switch_to_wio
mov edi, [ebx + device.rx_ring]
mov ecx, PCNET_RX_RING_SIZE
mov eax, [ebx + device.rx_buffer]
call GetPgAddr
.rx_init:
mov [edi + buf_head.base], eax
mov [edi + buf_head.length], PCNET_PKT_BUF_SZ_NEG
mov [edi + buf_head.status], 0x8000
add eax, PCNET_PKT_BUF_SZ
; inc eax
add edi, buf_head.size
loop .rx_init
mov edi, [ebx + device.tx_ring]
mov ecx, PCNET_TX_RING_SIZE
mov eax, [ebx + device.tx_buffer]
call GetPgAddr
.tx_init:
mov [edi + buf_head.base], eax
add eax, PCNET_PKT_BUF_SZ
add edi, buf_head.size
loop .tx_init
mov [ebx + device.tlen_rlen],(PCNET_TX_RING_LEN_BITS or PCNET_RX_RING_LEN_BITS)
; Ok, the eth_device structure is ready, let's probe the device
; Because initialization fires IRQ, IRQ handler must be aware of this device
mov eax, [PCNET_DEV] ; Add the device structure to our device list
mov [PCNET_LIST+4*eax], ebx ; (IRQ handler uses this list to find device)
inc [PCNET_DEV] ;
call probe ; this function will output in eax
test eax, eax
jnz .destroy ; If an error occured, exit
call EthRegDev
cmp eax, -1
je .destroy
ret
; If the device was already loaded, find the device number and return it in eax
.find_devicenum:
DEBUGF 1,"Trying to find device number of already registered device\n"
mov ebx, eax
call EthStruc2Dev ; This kernel procedure converts a pointer to device struct in ebx
; into a device number in edi
mov eax, edi ; Application wants it in eax instead
DEBUGF 1,"Kernel says: %u\n", eax
ret
; If an error occured, remove all allocated data and exit (returning -1 in eax)
.destroy:
; todo: reset device into virgin state
dec [PCNET_DEV]
.err:
DEBUGF 1,"Error, removing all data !\n"
stdcall KernelFree, dword [ebx+device.rx_buffer]
stdcall KernelFree, dword [ebx+device.tx_buffer]
stdcall KernelFree, ebx
.fail:
or eax, -1
ret
;------------------------------------------------------
endp
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
;; ;;
;; Actual Hardware dependent code starts here ;;
;; ;;
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
align 4
unload:
; TODO: (in this particular order)
;
; - Stop the device
; - Detach int handler
; - Remove device from local list (RTL8139_LIST)
; - call unregister function in kernel
; - Remove all allocated structures and buffers the card used
or eax,-1
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; probe: enables the device (if it really is a PCnet device)
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
probe:
mov edx, [ebx + device.io_addr]
call wio_reset
xor ecx, ecx
call wio_read_csr
cmp eax, 4
jne .try_dwio
; Try Word I/O
mov ax , 88
add edx, PCNET_WIO_RAP
out dx , ax
nop
nop
in ax , dx
sub edx, PCNET_WIO_RAP
cmp ax , 88
jne .try_dwio
DEBUGF 1,"Using WIO\n"
call switch_to_wio
jmp .L1
.try_dwio:
call dwio_reset
xor ecx, ecx
call dwio_read_csr
cmp eax, 4
jne .no_dev
; Try Dword I/O
add edx, PCNET_DWIO_RAP
mov eax, 88
out dx , eax
nop
nop
in eax, dx
sub edx, PCNET_DWIO_RAP
and eax, 0xffff
cmp eax, 88
jne .no_dev
DEBUGF 1,"Using DWIO\n"
call switch_to_dwio
jmp .L1
.no_dev:
DEBUGF 1,"PCnet device not found!\n"
mov eax, 1
ret
.L1:
; TODO: remember to use WORD or DWORD operations
;;; stdcall Sleep, 10
;---------------------------------------------
; Switch to dword operations
; DEBUGF 1,"Switching to 32\n"
;
; mov ecx, PCNET_DWIO_RDP
; mov eax, 0
; call wio_write_csr
;---------------------------------------------
mov ecx, PCNET_CSR_CHIPID0
call [ebx + device.access_read_csr]
mov esi, eax
mov ecx, PCNET_CSR_CHIPID1
call [ebx + device.access_read_csr]
shl eax, 16
or eax, esi
mov ecx, eax
and ecx, 0xfff
cmp ecx, 3
jne .no_dev
shr eax, 12
and eax, 0xffff
mov [ebx + device.chip_version], eax
DEBUGF 1,"chip version ok\n"
mov [ebx + device.fdx], 0
mov [ebx + device.mii], 0
mov [ebx + device.fset], 0
mov [ebx + device.dxsuflo], 0
mov [ebx + device.ltint], 0
cmp eax, 0x2420
je .L2
cmp eax, 0x2430
je .L2
mov [ebx + device.fdx], 1
cmp eax, 0x2621
je .L4
cmp eax, 0x2623
je .L5
cmp eax, 0x2624
je .L6
cmp eax, 0x2625
je .L7
cmp eax, 0x2626
je .L8
cmp eax, 0x2627
je .L9
DEBUGF 1,"Invalid chip rev\n"
jmp .no_dev
.L2:
mov [ebx + device.name], device_l2
jmp .L10
.L4:
mov [ebx + device.name], device_l4
; mov [ebx + device.fdx], 1
jmp .L10
.L5:
mov [ebx + device.name], device_l5
; mov [ebx + device.fdx], 1
mov [ebx + device.mii], 1
mov [ebx + device.fset], 1
mov [ebx + device.ltint], 1
jmp .L10
.L6:
mov [ebx + device.name], device_l6
; mov [ebx + device.fdx], 1
mov [ebx + device.mii], 1
mov [ebx + device.fset], 1
jmp .L10
.L7:
mov [ebx + device.name], device_l7
; mov [ebx + device.fdx], 1
mov [ebx + device.mii], 1
jmp .L10
.L8:
mov [ebx + device.name], device_l8
; mov [ebx + device.fdx], 1
mov ecx, PCNET_CSR_RXPOLL
call dword [ebx + device.access_read_bcr]
call dword [ebx + device.access_write_bcr]
jmp .L10
.L9:
mov [ebx + device.name], device_l9
; mov [ebx + device.fdx], 1
mov [ebx + device.mii], 1
.L10:
DEBUGF 1,"device name: %s\n",[ebx + device.name]
cmp [ebx + device.fset], 1
jne .L11
mov ecx, PCNET_BCR_BUSCTL
call [ebx + device.access_read_bcr]
or eax, 0x800
call [ebx + device.access_write_bcr]
mov ecx, PCNET_CSR_DMACTL
call [ebx + device.access_read_csr]
; and eax, 0xc00
; or eax, 0xc00
mov eax, 0xc00
call [ebx + device.access_write_csr]
mov [ebx + device.dxsuflo],1
mov [ebx + device.ltint],1
.L11:
push ebx
call adjust_pci_device
pop ebx
DEBUGF 1,"PCI done\n"
mov eax, PCNET_PORT_ASEL
mov [ebx + device.options], eax
mov [ebx + device.mode_], word 0x0003
mov [ebx + device.tlen_rlen], word (PCNET_TX_RING_LEN_BITS or PCNET_RX_RING_LEN_BITS)
mov dword [ebx + device.filter], 0
mov dword [ebx + device.filter+4], 0
mov eax, PCNET_IMR
mov ecx, PCNET_CSR_IMR ; Write interrupt mask
call [ebx + device.access_write_csr]
if 0
mov ecx, PCNET_BCR_SSTYLE ; Select Software style 2 TODO: freebsd driver uses style 3, why?
mov eax, 2
call [ebx + device.access_write_bcr]
; ------------ really nescessary??? ----------------
lea eax, [ebx + device.private]
mov ecx, eax
and ecx, 0xFFF ; KolibriOS PAGE SIZE
call GetPgAddr
add eax, ecx
and eax, 0xffff
mov ecx, PCNET_CSR_IAB0
call [ebx + device.access_write_csr]
lea eax, [ebx + device.private]
mov ecx, eax
and ecx, 0xFFF ; KolibriOS PAGE SIZE
call GetPgAddr
add eax, ecx
shr eax,16
mov ecx, PCNET_CSR_IAB1
call [ebx + device.access_write_csr]
mov ecx, PCNET_CSR_CSR
mov eax, 1
call [ebx + device.access_write_csr]
; ------------------------------------------------
end if
; mov esi, 1
; call Sleep
reset:
; attach int handler
movzx eax, [ebx+device.irq_line]
DEBUGF 1,"Attaching int handler to irq %x\n",eax:1
stdcall AttachIntHandler, eax, int_handler, dword 0
test eax, eax
jnz @f
DEBUGF 1,"\nCould not attach int handler!\n"
; or eax, -1
; ret
@@:
mov edx, [ebx + device.io_addr]
call [ebx + device.access_reset]
; Switch pcnet32 to 32bit mode
mov ecx, PCNET_BCR_SSTYLE
mov eax, 2
call [ebx + device.access_write_bcr]
; set/reset autoselect bit
mov ecx, PCNET_BCR_MISCCFG
call [ebx + device.access_read_bcr]
and eax,not 2
test [ebx + device.options], PCNET_PORT_ASEL
jz .L1
or eax, 2
.L1:
call [ebx + device.access_write_bcr]
; Handle full duplex setting
cmp byte [ebx + device.full_duplex], 0
je .L2
mov ecx, PCNET_BCR_DUPLEX
call [ebx + device.access_read_bcr]
and eax, not 3
test [ebx + device.options], PCNET_PORT_FD
jz .L3
or eax, 1
cmp [ebx + device.options], PCNET_PORT_FD or PCNET_PORT_AUI
jne .L4
or eax, 2
jmp .L4
.L3:
test [ebx + device.options], PCNET_PORT_ASEL
jz .L4
cmp [ebx + device.chip_version], 0x2627
jne .L4
or eax, 3
.L4:
mov ecx, PCNET_BCR_DUPLEX
call [ebx + device.access_write_bcr]
.L2:
; set/reset GPSI bit in test register
mov ecx, 124
call [ebx + device.access_read_csr]
mov ecx, [ebx + device.options]
and ecx, PCNET_PORT_PORTSEL
cmp ecx, PCNET_PORT_GPSI
jne .L5
or eax, 0x10
.L5:
call [ebx + device.access_write_csr]
cmp [ebx + device.mii], 0
je .L6
test [ebx + device.options], PCNET_PORT_ASEL
jnz .L6
mov ecx, PCNET_BCR_MIICTL
call [ebx + device.access_read_bcr]
and eax,not 0x38
test [ebx + device.options], PCNET_PORT_FD
jz .L7
or eax, 0x10
.L7:
test [ebx + device.options], PCNET_PORT_100
jz .L8
or eax, 0x08
.L8:
call [ebx + device.access_write_bcr]
jmp .L9
.L6:
test [ebx + device.options], PCNET_PORT_ASEL
jz .L9
mov ecx, PCNET_BCR_MIICTL
DEBUGF 1,"ASEL, enable auto-negotiation\n"
call [ebx + device.access_read_bcr]
and eax, not 0x98
or eax, 0x20
call [ebx + device.access_write_bcr]
.L9:
cmp [ebx + device.ltint],0
je .L10
mov ecx,5
call [ebx + device.access_read_csr]
or eax,(1 shl 14)
call [ebx + device.access_write_csr]
.L10:
mov eax,[ebx + device.options]
and eax,PCNET_PORT_PORTSEL
shl eax,7
mov [ebx + device.mode_],ax
mov dword [ebx + device.filter], -1
mov dword [ebx + device.filter+4], -1
call read_mac
lea esi, [ebx + device.mac]
lea edi, [ebx + device.phys_addr]
movsd
movsw
lea eax, [ebx + device.private]
mov ecx, eax
and ecx, 0xFFF ; KolibriOS PAGE SIZE
call GetPgAddr
add eax, ecx
push eax
and eax, 0xffff
mov ecx, 1
call [ebx + device.access_write_csr]
pop eax
shr eax,16
mov ecx,2
call [ebx + device.access_write_csr]
mov ecx,4
mov eax,0x0915
call [ebx + device.access_write_csr]
mov ecx,0
mov eax,1
call [ebx + device.access_write_csr]
mov [ebx + device.tx_full],0
mov [ebx + device.cur_rx],0
mov [ebx + device.cur_tx],0
mov [ebx + device.dirty_rx],0
mov [ebx + device.dirty_tx],0
mov ecx,100
.L11:
push ecx
xor ecx,ecx
call [ebx + device.access_read_csr]
pop ecx
test ax,0x100
jnz .L12
loop .L11
.L12:
DEBUGF 1,"hardware reset\n"
xor ecx, ecx
mov eax, 0x0002
call [ebx + device.access_write_csr]
xor ecx, ecx
call [ebx + device.access_read_csr]
xor ecx, ecx
mov eax, PCNET_CSR_INTEN or PCNET_CSR_START
call [ebx + device.access_write_csr]
DEBUGF 1,"PCNET reset complete\n"
xor eax, eax
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Transmit ;;
;; ;;
;; In: buffer pointer in [esp] ;;
;; size of buffer in [esp+4] ;;
;; pointer to device structure in ebx ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
transmit:
DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n",[esp],[esp+4]
mov eax, [esp]
DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
[eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\
[eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\
[eax+13]:2,[eax+12]:2
cmp dword [esp+4], 1514
jg .finish ; packet is too long
cmp dword [esp+4], 60
jl .finish ; packet is too short
; check descriptor
movzx eax, [ebx + device.cur_tx]
imul edi, eax, PCNET_PKT_BUF_SZ
shl eax, 4
add edi, [ebx + device.tx_buffer]
add eax, [ebx + device.tx_ring]
test byte [eax + buf_head.status + 1], 80h
jnz .nospace
; descriptor is free, copy data
mov esi, [esp]
mov ecx, [esp+4]
mov edx, ecx
shr ecx, 2
and edx, 3
rep movsd
mov ecx, edx
rep movsb
; set length
mov ecx, [esp+4]
neg ecx
mov [eax + buf_head.length], cx
; put to transfer queue
mov [eax + buf_head.status], 0x8300
; trigger an immediate send
xor ecx, ecx ; CSR0
call [ebx + device.access_read_csr]
or eax, PCNET_CSR_TX
call [ebx + device.access_write_csr]
; get next descriptor 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, ...
inc [ebx + device.cur_tx]
and [ebx + device.cur_tx], 3
DEBUGF 2," - Packet Sent! "
.finish:
DEBUGF 2," - Done!\n"
;;; call KernelFree
add esp, 4+4 ; pop (balance stack)
ret
.nospace:
DEBUGF 1, 'ERROR: no free transmit descriptors\n'
; todo: maybe somehow notify the kernel about the error?
add esp, 4+4
ret
;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Interrupt handler ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;
align 4
int_handler:
; DEBUGF 1,"IRQ %x ",eax:2 ; no, you cant replace 'eax:2' with 'al', this must be a bug in FDO
; find pointer of device wich made IRQ occur
mov esi, PCNET_LIST
mov ecx, [PCNET_DEV]
test ecx, ecx
jz .abort
.nextdevice:
mov ebx, dword [esi]
mov edx, [ebx + device.io_addr] ; get IRQ reason
push ecx
xor ecx, ecx ; CSR0
call [ebx + device.access_read_csr]
pop ecx
test al , al
js .got_it
add esi, 4
loop .nextdevice
ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver
.got_it:
;-------------------------------------------------------
; Possible reasons:
; initialization done - ignore
; transmit done - ignore
; packet received - handle
; Clear ALL IRQ reasons.
; N.B. One who wants to handle more than one reason must be ready
; to two or more reasons in one IRQ.
xor ecx, ecx
call [ebx + device.access_write_csr]
; Received packet ok?
test ax, PCNET_CSR_RINT
jz @f
movzx eax, [ebx + device.cur_rx]
; and eax, PCNET_RX_RING_MOD_MASK
mov edi, eax
imul esi, eax, PCNET_PKT_BUF_SZ ;
add esi, [ebx + device.rx_buffer] ; esi now points to rx buffer
shl edi, 4 ; desc * 16 (16 is size of one ring entry)
add edi, [ebx + device.rx_ring] ; edi now points to current rx ring entry
mov cx , [edi + buf_head.status]
test cx , PCNET_RXSTAT_OWN ; If this bit is set, the controller OWN's the packet, if not, we do
jnz .abort
test cx , PCNET_RXSTAT_ENP
jz .abort
test cx , PCNET_RXSTAT_STP
jz .abort
movzx ecx, [edi + buf_head.msg_length] ; get packet length in ecx
sub ecx, 4 ;
push ecx
stdcall KernelAlloc, ecx ; Allocate a buffer to put packet into
pop ecx
test eax, eax ; Test if we allocated succesfully
jz .abort ;
push ecx ; for eth_receiver
push eax ;
xchg edi, eax
push ecx
shr ecx, 2
cld
rep movsd
pop ecx
and ecx, 3
rep movsb
; mov word [eax + buf_head.length], PCNET_PKT_BUF_SZ_NEG
mov word [eax + buf_head.status], PCNET_RXSTAT_OWN ; Set OWN bit back to 1 (controller may write to tx-buffer again now)
inc [ebx + device.cur_rx] ; update descriptor
and [ebx + device.cur_rx], 3 ;
jmp EthReceiver ; Send the copied packet to kernel
.abort:
@@:
ret
;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Write MAC address ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;
align 4
write_mac: ; in: mac pushed onto stack (as 3 words)
DEBUGF 1,"Writing MAC: %x-%x-%x-%x-%x-%x",[esp+0]:2,[esp+1]:2,[esp+2]:2,[esp+3]:2,[esp+4]:2,[esp+5]:2
mov edx, [ebx + device.io_addr]
add dx, 2
xor eax, eax
mov ecx, PCNET_CSR_PAR0
@@:
pop ax
call [ebx + device.access_write_csr]
DEBUGF 1,"."
inc ecx
cmp ecx, PCNET_CSR_PAR2
jl @r
DEBUGF 1,"\n"
; Notice this procedure does not ret, but continues to read_mac instead.
;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Read MAC address ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;
read_mac: ; T- OK
DEBUGF 1,"Reading MAC"
mov edx, [ebx + device.io_addr]
add dx, 6
@@:
dec dx
dec dx
in ax, dx
push ax
DEBUGF 1,"."
cmp edx, [ebx + device.io_addr]
jg @r
DEBUGF 1," %x-%x-%x-%x-%x-%x\n",[esp+0]:2,[esp+1]:2,[esp+2]:2,[esp+3]:2,[esp+4]:2,[esp+5]:2
lea edi, [ebx + device.mac]
pop ax
stosw
pop ax
stosw
pop ax
stosw
ret
switch_to_wio:
mov [ebx + device.access_read_csr], wio_read_csr
mov [ebx + device.access_write_csr], wio_write_csr
mov [ebx + device.access_read_bcr], wio_read_bcr
mov [ebx + device.access_write_bcr], wio_write_bcr
mov [ebx + device.access_read_rap], wio_read_rap
mov [ebx + device.access_write_rap], wio_write_rap
mov [ebx + device.access_reset], wio_reset
ret
switch_to_dwio:
mov [ebx + device.access_read_csr], dwio_read_csr
mov [ebx + device.access_write_csr], dwio_write_csr
mov [ebx + device.access_read_bcr], dwio_read_bcr
mov [ebx + device.access_write_bcr], dwio_write_bcr
mov [ebx + device.access_read_rap], dwio_read_rap
mov [ebx + device.access_write_rap], dwio_write_rap
mov [ebx + device.access_reset], dwio_reset
ret
; ecx - index
; return:
; eax - data
wio_read_csr:
add edx, PCNET_WIO_RAP
mov ax , cx
out dx , ax
add edx, PCNET_WIO_RDP - PCNET_WIO_RAP
in ax , dx
and eax, 0xffff
sub edx, PCNET_WIO_RDP
ret
; eax - data
; ecx - index
wio_write_csr:
add edx, PCNET_WIO_RAP
xchg eax, ecx
out dx , ax
xchg eax, ecx
add edx, PCNET_WIO_RDP - PCNET_WIO_RAP
out dx , ax
sub edx, PCNET_WIO_RDP
ret
; ecx - index
; return:
; eax - data
wio_read_bcr:
add edx, PCNET_WIO_RAP
mov ax , cx
out dx , ax
add edx, PCNET_WIO_BDP - PCNET_WIO_RAP
in ax , dx
and eax, 0xffff
sub edx, PCNET_WIO_BDP
ret
; eax - data
; ecx - index
wio_write_bcr:
add edx, PCNET_WIO_RAP
xchg eax, ecx
out dx , ax
xchg eax, ecx
add edx, PCNET_WIO_BDP - PCNET_WIO_RAP
out dx , ax
sub edx, PCNET_WIO_BDP
ret
wio_read_rap:
add edx, PCNET_WIO_RAP
in ax , dx
and eax, 0xffff
sub edx, PCNET_WIO_RAP
ret
; eax - val
wio_write_rap:
add edx, PCNET_WIO_RAP
out dx , ax
sub edx, PCNET_WIO_RAP
ret
wio_reset:
push eax
add edx, PCNET_WIO_RESET
in ax , dx
pop eax
sub edx, PCNET_WIO_RESET
ret
; ecx - index
; return:
; eax - data
dwio_read_csr:
add edx, PCNET_DWIO_RAP
mov eax, ecx
out dx , eax
add edx, PCNET_DWIO_RDP - PCNET_DWIO_RAP
in eax, dx
and eax, 0xffff
sub edx, PCNET_DWIO_RDP
ret
; ecx - index
; eax - data
dwio_write_csr:
add edx, PCNET_DWIO_RAP
xchg eax, ecx
out dx , eax
add edx, PCNET_DWIO_RDP - PCNET_DWIO_RAP
xchg eax, ecx
out dx , eax
sub edx, PCNET_DWIO_RDP
ret
; ecx - index
; return:
; eax - data
dwio_read_bcr:
add edx, PCNET_DWIO_RAP
mov eax, ecx
out dx , eax
add edx, PCNET_DWIO_BDP - PCNET_DWIO_RAP
in eax, dx
and eax, 0xffff
sub edx, PCNET_DWIO_BDP
ret
; ecx - index
; eax - data
dwio_write_bcr:
add edx, PCNET_DWIO_RAP
xchg eax, ecx
out dx , eax
add edx, PCNET_DWIO_BDP - PCNET_DWIO_RAP
xchg eax, ecx
out dx , eax
sub edx, PCNET_DWIO_BDP
ret
dwio_read_rap:
add edx, PCNET_DWIO_RAP
in eax, dx
and eax, 0xffff
sub edx, PCNET_DWIO_RAP
ret
; eax - val
dwio_write_rap:
add edx, PCNET_DWIO_RAP
out dx , eax
sub edx, PCNET_DWIO_RAP
ret
dwio_reset:
push eax
add edx, PCNET_DWIO_RESET
in eax, dx
pop eax
sub edx, PCNET_DWIO_RESET
ret
adjust_pci_device:
;*******Get current setting************************
movzx edx, byte [ebx + device.pci_dev]
movzx ecx, byte [ebx + device.pci_bus]
push ecx edx
stdcall PciRead16, ecx ,edx ,0x04
pop edx ecx
; ;******see if its already set as bus master********
; and ax,5
; cmp ax,5
; je .Latency
;******Make card a bus master*******
or al, 5
stdcall PciWrite16, ecx ,edx ,0x04, eax
;******Check latency setting***********
.Latency:
;*******Get current latency setting************************
; mov al, 1 ;read a byte
; mov bh, [pci_dev]
; mov ah, [pci_bus]
; mov bl, 0x0D ;from Lantency Timer Register
; call pci_read_reg
;******see if its aat least 64 clocks********
; cmp ax,64
; jge PCNET_adjust_pci_device_Done
;******Set latency to 32 clocks*******
; mov cx, 64 ;value to write
; mov bh, [pci_dev]
; mov al, 1 ;write a byte
; mov ah, [pci_bus]
; mov bl, 0x0D ;to Lantency Timer Register
; call pci_write_reg
;******Check latency setting***********
.Done:
ret
; End of code
align 4 ; Place all initialised data here
PCNET_DEV dd 0
version dd (5 shl 16) or (API_VERSION and 0xFFFF)
my_service db 'PCnet',0 ; max 16 chars include zero
device_l2 db "PCnet/PCI 79C970",0
device_l4 db "PCnet/PCI II 79C970A",0
device_l5 db "PCnet/FAST 79C971",0
device_l6 db "PCnet/FAST+ 79C972",0
device_l7 db "PCnet/FAST III 79C973",0
device_l8 db "PCnet/Home 79C978",0
device_l9 db "PCnet/FAST III 79C975",0
options_mapping:
dd PCNET_PORT_ASEL ; 0 Auto-select
dd PCNET_PORT_AUI ; 1 BNC/AUI
dd PCNET_PORT_AUI ; 2 AUI/BNC
dd PCNET_PORT_ASEL ; 3 not supported
dd PCNET_PORT_10BT or PCNET_PORT_FD ; 4 10baseT-FD
dd PCNET_PORT_ASEL ; 5 not supported
dd PCNET_PORT_ASEL ; 6 not supported
dd PCNET_PORT_ASEL ; 7 not supported
dd PCNET_PORT_ASEL ; 8 not supported
dd PCNET_PORT_MII ; 9 MII 10baseT
dd PCNET_PORT_MII or PCNET_PORT_FD ; 10 MII 10baseT-FD
dd PCNET_PORT_MII ; 11 MII (autosel)
dd PCNET_PORT_10BT ; 12 10BaseT
dd PCNET_PORT_MII or PCNET_PORT_100 ; 13 MII 100BaseTx
dd PCNET_PORT_MII or PCNET_PORT_100 or PCNET_PORT_FD ; 14 MII 100BaseTx-FD
dd PCNET_PORT_ASEL ; 15 not supported
include_debug_strings ; All data wich FDO uses will be included here
section '.data' data readable writable align 16 ; place all uninitialized data place here
PCNET_LIST rd MAX_PCNET ; This list contains all pointers to device structures the driver is handling