kolibrios/kernel/branches/net/network/udp.inc

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                                 ;;
;; Copyright (C) KolibriOS team 2004-2010. All rights reserved.    ;;
;; Distributed under terms of the GNU General Public License       ;;
;;                                                                 ;;
;;  UDP.INC                                                        ;;
;;                                                                 ;;
;;  Part of the tcp/ip network stack for KolibriOS                 ;;
;;                                                                 ;;
;;    Written by hidnplayr@kolibrios.org                           ;;
;;                                                                 ;;
;;          GNU GENERAL PUBLIC LICENSE                             ;;
;;             Version 2, June 1991                                ;;
;;                                                                 ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

$Revision$


struct	UDP_Packet
	.SourcePort		dw  ?
	.DestinationPort	dw  ?
	.Length 		dw  ?  ; Length of (UDP Header + Data)
	.Checksum		dw  ?
	.Data:

ends


align 4
uglobal
	UDP_PACKETS_TX		rd  MAX_IP
	UDP_PACKETS_RX		rd  MAX_IP
endg


;-----------------------------------------------------------------
;
; UDP_init
;
;  This function resets all UDP variables
;
;  IN:  /
;  OUT: /
;
;-----------------------------------------------------------------
align 4
UDP_init:

	xor	eax, eax
	mov	edi, UDP_PACKETS_TX
	mov	ecx, 2*MAX_IP
	rep	stosd

	ret


;-----------------------------------------------------------------
;
; UDP_input:
;
;  Called by IPv4_input,
;  this procedure will inject the udp data diagrams in the application sockets.
;
;  IN:  Pointer to buffer in [esp]
;       size of buffer in [esp+4]
;       pointer to device struct in ebx
;       UDP Packet size in ecx
;       pointer to UDP Packet in edx
;
;       esi = ipv4 source address
;       edi = ipv4 dest   address
;
;  OUT: /
;
;-----------------------------------------------------------------
align 4
UDP_input:

	DEBUGF	1,"UDP_input, size:%u\n", ecx

; First validate, checksum:
	cmp	[edx + UDP_Packet.Checksum], 0
	jz	.no_checksum

	xchg	edi, esi	; save ipv4 source address to edi so we can use it later

	push	edx
	push	esi edi
	mov	esi, edx
	call	UDP_checksum	; this destroys edx, ecx and esi (but not edi...)
	pop	edx

	cmp	[edx + UDP_Packet.Checksum], 0
	jnz	.checksum_mismatch

  .no_checksum:
	DEBUGF	1,"UDP Checksum is correct\n"

	; Look for a socket where
	; IP Packet UDP Destination Port = local Port
	; IP Packet SA = Remote IP

	mov	eax, net_sockets
  .try_more:
	mov	si , [edx + UDP_Packet.DestinationPort]   ; get the local port from the IP Packet's UDP header
	rol	si , 8
  .next_socket:
	mov	eax, [eax + SOCKET.NextPtr]
	or	eax, eax
	jz	.dump
	cmp	[eax + SOCKET.Domain], AF_INET4
	jne	.next_socket
	cmp	[eax + SOCKET.Type], IP_PROTO_UDP
	jne	.next_socket
	cmp	[eax + UDP_SOCKET.LocalPort], si
	jne	.next_socket

	DEBUGF	1,"using socket: %x\n", eax

	;;; TODO: when packet is processed, check more sockets!

	cmp	[eax + IP_SOCKET.RemoteIP], 0xffffffff
	je	@f
	cmp	[eax + IP_SOCKET.RemoteIP], edi 	; edi is the packets source address
	jne	.try_more
       @@:

	cmp	[eax + UDP_SOCKET.firstpacket], 0
	jz	.updateport

	mov	si, [edx + UDP_Packet.SourcePort]
	rol	si, 8
	cmp	[eax + UDP_SOCKET.RemotePort], si
	jne	.dump

	push	ebx
	lea	ebx, [eax + SOCKET.lock]
	call	wait_mutex
	pop	ebx

  .updatesock:
	inc	[UDP_PACKETS_RX]
	DEBUGF	1,"Found valid UDP packet for socket %x\n", eax
	lea	esi, [edx + UDP_Packet.Data]
	movzx	ecx, [edx + UDP_Packet.Length]
	rol	cx , 8
	sub	cx , UDP_Packet.Data

	jmp	SOCKET_input

  .updateport:
	push	ebx
	lea	ebx, [eax + SOCKET.lock]
	call	wait_mutex
	pop	ebx

	mov	si, [edx + UDP_Packet.SourcePort]
	rol	si, 8
	DEBUGF	1,"Changing remote port to: %u\n", si
	mov	[eax + UDP_SOCKET.RemotePort], si
	inc	[eax + UDP_SOCKET.firstpacket]

	jmp	.updatesock


  .checksum_mismatch:

	DEBUGF	2,"UDP_Handler - checksum mismatch\n"

;        mov     esi, edx
;       @@:                         ;
;        lodsb                      ;
;        DEBUGF  2,"%x ", eax:2     ;
;        loop    @r                 ;

  .dump:
	call	kernel_free
	add	esp, 4 ; pop (balance stack)
	DEBUGF	2,"UDP_Handler - dumping\n"

	ret




;-----------------------------------------------------------------
;
; UDP_output
;
; IN: eax = socket pointer
;     ecx = number of bytes to send
;     esi = pointer to data
;
;-----------------------------------------------------------------

align 4
UDP_output:

	DEBUGF	1,"UDP_output: socket:%x, bytes: %u, data ptr: %x\n", eax, ecx, esi

	mov	dx, [eax + UDP_SOCKET.RemotePort]
	DEBUGF	1,"remote port: %u\n", dx
	rol	dx, 8
	rol	edx, 16
	mov	dx, [eax + UDP_SOCKET.LocalPort]
	DEBUGF	1,"local port: %u\n", dx
	rol	dx, 8


	mov	ebx, [eax + IP_SOCKET.LocalIP]
	mov	eax, [eax + IP_SOCKET.RemoteIP]

	mov	di , IP_PROTO_UDP
	sub	esp, 8						; Data ptr and data size will be placed here
	add	ecx, UDP_Packet.Data

;;; TODO: fragment id

	push	edx esi
	call	IPv4_create_packet
	jz	.fail

	mov	[esp + 8], eax					; pointer to buffer start
	mov	[esp + 8 + 4], edx				; buffer size

	rol	cx, 8
	mov	[edi + UDP_Packet.Length], cx
	ror	cx, 8

	pop	esi
	push	edi ecx
	sub	ecx, UDP_Packet.Data
	add	edi, UDP_Packet.Data
	shr	ecx, 2
	rep	movsd
	mov	ecx, [esp]
	and	ecx, 3
	rep	movsb
	pop	ecx edi

	pop	dword [edi + UDP_Packet.SourcePort]
	mov	[edi + UDP_Packet.Checksum], 0			; set it to zero, to calculate checksum

; Checksum
	mov	esi, edi
	pushd	[edi-4] ; destination address                   ; TODO: fix this, IPv4 packet could have options..
	pushd	[edi-8] ; source address
	call	UDP_checksum

	inc	[UDP_PACKETS_TX]

	DEBUGF	1,"Sending UDP Packet to device %x\n", ebx

	jmp	NET_send

  .fail:
	add	esp, 8+8
	ret




;-----------------------------------------------------------------
;
; UDP_checksum
;
; This is the fast procedure to create or check a UDP header
;  - To create a new checksum, the checksum field must be set to 0 before computation
;  - To check an existing checksum, leave the checksum as is,
;     and it will be 0 after this procedure, if it was correct
;
;  IN:  push source ip
;       push dest ip
;       esi = packet ptr
;
;  OUT: checksum is filled in in packet! (but also in dx)
;
;-----------------------------------------------------------------

align 4
UDP_checksum:

; Pseudoheader
	mov	edx, IP_PROTO_UDP		; NO shl 8 here ! (it took me ages to figure this one out)

	add	dl, [esp+1+4]
	adc	dh, [esp+0+4]
	adc	dl, [esp+3+4]
	adc	dh, [esp+2+4]

	adc	dl, [esp+1+8]
	adc	dh, [esp+0+8]
	adc	dl, [esp+3+8]
	adc	dh, [esp+2+8]


	adc	dl, cl ; byte[esi+UDP_Packet.Length+1]
	adc	dh, ch ; byte[esi+UDP_Packet.Length+0]

; Done with pseudoheader, now do real header
	adc	dl, byte[esi+UDP_Packet.SourcePort+1]
	adc	dh, byte[esi+UDP_Packet.SourcePort+0]

	adc	dl, byte[esi+UDP_Packet.DestinationPort+1]
	adc	dh, byte[esi+UDP_Packet.DestinationPort+0]

	adc	dl, byte[esi+UDP_Packet.Length+1]
	adc	dh, byte[esi+UDP_Packet.Length+0]

	adc	edx, 0

; Done with header, now do data
	push	esi
	movzx	ecx, [esi+UDP_Packet.Length]
	rol	cx , 8
	sub	cx , UDP_Packet.Data
	add	esi, UDP_Packet.Data

	call	checksum_1
	call	checksum_2
	pop	esi

	neg	[esi+UDP_Packet.Checksum]	    ; zero will stay zero so we just get the checksum
	add	[esi+UDP_Packet.Checksum], dx	    ;  , else we will get (new checksum - old checksum) in the end, wich should be 0 :)

	ret	8




;---------------------------------------------------------------------------
;
; UDP_API
;
; This function is called by system function 75
;
; IN:  subfunction number in bl
;      device number in bh
;      ecx, edx, .. depends on subfunction
;
; OUT:
;
;---------------------------------------------------------------------------

align 4
UDP_API:

	movzx	eax, bh
	shl	eax, 2

	test	bl, bl
	jz	.packets_tx	; 0
	dec	bl
	jz	.packets_rx	; 1

.error:
	mov	eax, -1
	ret

.packets_tx:
	add	eax, UDP_PACKETS_TX
	mov	eax, [eax]
	ret

.packets_rx:
	add	eax, UDP_PACKETS_RX
	mov	eax, [eax]
	ret