kolibrios/drivers/video/drm/i915/intel_csr.c

486 lines
13 KiB
C
Raw Normal View History

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#include <linux/firmware.h>
#include "i915_drv.h"
#include "i915_reg.h"
/**
* DOC: csr support for dmc
*
* Display Context Save and Restore (CSR) firmware support added from gen9
* onwards to drive newly added DMC (Display microcontroller) in display
* engine to save and restore the state of display engine when it enter into
* low-power state and comes back to normal.
*
* Firmware loading status will be one of the below states: FW_UNINITIALIZED,
* FW_LOADED, FW_FAILED.
*
* Once the firmware is written into the registers status will be moved from
* FW_UNINITIALIZED to FW_LOADED and for any erroneous condition status will
* be moved to FW_FAILED.
*/
#define I915_CSR_SKL "i915/skl_dmc_ver1.bin"
#define I915_CSR_BXT "i915/bxt_dmc_ver1.bin"
MODULE_FIRMWARE(I915_CSR_SKL);
MODULE_FIRMWARE(I915_CSR_BXT);
/*
* SKL CSR registers for DC5 and DC6
*/
#define CSR_PROGRAM(i) (0x80000 + (i) * 4)
#define CSR_SSP_BASE_ADDR_GEN9 0x00002FC0
#define CSR_HTP_ADDR_SKL 0x00500034
#define CSR_SSP_BASE 0x8F074
#define CSR_HTP_SKL 0x8F004
#define CSR_LAST_WRITE 0x8F034
#define CSR_LAST_WRITE_VALUE 0xc003b400
/* MMIO address range for CSR program (0x80000 - 0x82FFF) */
#define CSR_MAX_FW_SIZE 0x2FFF
#define CSR_DEFAULT_FW_OFFSET 0xFFFFFFFF
#define CSR_MMIO_START_RANGE 0x80000
#define CSR_MMIO_END_RANGE 0x8FFFF
struct intel_css_header {
/* 0x09 for DMC */
uint32_t module_type;
/* Includes the DMC specific header in dwords */
uint32_t header_len;
/* always value would be 0x10000 */
uint32_t header_ver;
/* Not used */
uint32_t module_id;
/* Not used */
uint32_t module_vendor;
/* in YYYYMMDD format */
uint32_t date;
/* Size in dwords (CSS_Headerlen + PackageHeaderLen + dmc FWsLen)/4 */
uint32_t size;
/* Not used */
uint32_t key_size;
/* Not used */
uint32_t modulus_size;
/* Not used */
uint32_t exponent_size;
/* Not used */
uint32_t reserved1[12];
/* Major Minor */
uint32_t version;
/* Not used */
uint32_t reserved2[8];
/* Not used */
uint32_t kernel_header_info;
} __packed;
struct intel_fw_info {
uint16_t reserved1;
/* Stepping (A, B, C, ..., *). * is a wildcard */
char stepping;
/* Sub-stepping (0, 1, ..., *). * is a wildcard */
char substepping;
uint32_t offset;
uint32_t reserved2;
} __packed;
struct intel_package_header {
/* DMC container header length in dwords */
unsigned char header_len;
/* always value would be 0x01 */
unsigned char header_ver;
unsigned char reserved[10];
/* Number of valid entries in the FWInfo array below */
uint32_t num_entries;
struct intel_fw_info fw_info[20];
} __packed;
struct intel_dmc_header {
/* always value would be 0x40403E3E */
uint32_t signature;
/* DMC binary header length */
unsigned char header_len;
/* 0x01 */
unsigned char header_ver;
/* Reserved */
uint16_t dmcc_ver;
/* Major, Minor */
uint32_t project;
/* Firmware program size (excluding header) in dwords */
uint32_t fw_size;
/* Major Minor version */
uint32_t fw_version;
/* Number of valid MMIO cycles present. */
uint32_t mmio_count;
/* MMIO address */
uint32_t mmioaddr[8];
/* MMIO data */
uint32_t mmiodata[8];
/* FW filename */
unsigned char dfile[32];
uint32_t reserved1[2];
} __packed;
struct stepping_info {
char stepping;
char substepping;
};
static const struct stepping_info skl_stepping_info[] = {
{'A', '0'}, {'B', '0'}, {'C', '0'},
{'D', '0'}, {'E', '0'}, {'F', '0'},
{'G', '0'}, {'H', '0'}, {'I', '0'}
};
static struct stepping_info bxt_stepping_info[] = {
{'A', '0'}, {'A', '1'}, {'A', '2'},
{'B', '0'}, {'B', '1'}, {'B', '2'}
};
static char intel_get_stepping(struct drm_device *dev)
{
if (IS_SKYLAKE(dev) && (dev->pdev->revision <
ARRAY_SIZE(skl_stepping_info)))
return skl_stepping_info[dev->pdev->revision].stepping;
else if (IS_BROXTON(dev) && (dev->pdev->revision <
ARRAY_SIZE(bxt_stepping_info)))
return bxt_stepping_info[dev->pdev->revision].stepping;
else
return -ENODATA;
}
static char intel_get_substepping(struct drm_device *dev)
{
if (IS_SKYLAKE(dev) && (dev->pdev->revision <
ARRAY_SIZE(skl_stepping_info)))
return skl_stepping_info[dev->pdev->revision].substepping;
else if (IS_BROXTON(dev) && (dev->pdev->revision <
ARRAY_SIZE(bxt_stepping_info)))
return bxt_stepping_info[dev->pdev->revision].substepping;
else
return -ENODATA;
}
/**
* intel_csr_load_status_get() - to get firmware loading status.
* @dev_priv: i915 device.
*
* This function helps to get the firmware loading status.
*
* Return: Firmware loading status.
*/
enum csr_state intel_csr_load_status_get(struct drm_i915_private *dev_priv)
{
enum csr_state state;
mutex_lock(&dev_priv->csr_lock);
state = dev_priv->csr.state;
mutex_unlock(&dev_priv->csr_lock);
return state;
}
/**
* intel_csr_load_status_set() - help to set firmware loading status.
* @dev_priv: i915 device.
* @state: enumeration of firmware loading status.
*
* Set the firmware loading status.
*/
void intel_csr_load_status_set(struct drm_i915_private *dev_priv,
enum csr_state state)
{
mutex_lock(&dev_priv->csr_lock);
dev_priv->csr.state = state;
mutex_unlock(&dev_priv->csr_lock);
}
/**
* intel_csr_load_program() - write the firmware from memory to register.
* @dev: drm device.
*
* CSR firmware is read from a .bin file and kept in internal memory one time.
* Everytime display comes back from low power state this function is called to
* copy the firmware from internal memory to registers.
*/
void intel_csr_load_program(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 *payload = dev_priv->csr.dmc_payload;
uint32_t i, fw_size;
if (!IS_GEN9(dev)) {
DRM_ERROR("No CSR support available for this platform\n");
return;
}
/*
* FIXME: Firmware gets lost on S3/S4, but not when entering system
* standby or suspend-to-idle (which is just like forced runtime pm).
* Unfortunately the ACPI subsystem doesn't yet give us a way to
* differentiate this, hence figure it out with this hack.
*/
if (I915_READ(CSR_PROGRAM(0)))
return;
mutex_lock(&dev_priv->csr_lock);
fw_size = dev_priv->csr.dmc_fw_size;
for (i = 0; i < fw_size; i++)
I915_WRITE(CSR_PROGRAM(i), payload[i]);
for (i = 0; i < dev_priv->csr.mmio_count; i++) {
I915_WRITE(dev_priv->csr.mmioaddr[i],
dev_priv->csr.mmiodata[i]);
}
dev_priv->csr.state = FW_LOADED;
mutex_unlock(&dev_priv->csr_lock);
}
static void finish_csr_load(const struct firmware *fw, void *context)
{
struct drm_i915_private *dev_priv = context;
struct drm_device *dev = dev_priv->dev;
struct intel_css_header *css_header;
struct intel_package_header *package_header;
struct intel_dmc_header *dmc_header;
struct intel_csr *csr = &dev_priv->csr;
char stepping = intel_get_stepping(dev);
char substepping = intel_get_substepping(dev);
uint32_t dmc_offset = CSR_DEFAULT_FW_OFFSET, readcount = 0, nbytes;
uint32_t i;
uint32_t *dmc_payload;
bool fw_loaded = false;
if (!fw) {
i915_firmware_load_error_print(csr->fw_path, 0);
goto out;
}
if ((stepping == -ENODATA) || (substepping == -ENODATA)) {
DRM_ERROR("Unknown stepping info, firmware loading failed\n");
goto out;
}
/* Extract CSS Header information*/
css_header = (struct intel_css_header *)fw->data;
if (sizeof(struct intel_css_header) !=
(css_header->header_len * 4)) {
DRM_ERROR("Firmware has wrong CSS header length %u bytes\n",
(css_header->header_len * 4));
goto out;
}
readcount += sizeof(struct intel_css_header);
/* Extract Package Header information*/
package_header = (struct intel_package_header *)
&fw->data[readcount];
if (sizeof(struct intel_package_header) !=
(package_header->header_len * 4)) {
DRM_ERROR("Firmware has wrong package header length %u bytes\n",
(package_header->header_len * 4));
goto out;
}
readcount += sizeof(struct intel_package_header);
/* Search for dmc_offset to find firware binary. */
for (i = 0; i < package_header->num_entries; i++) {
if (package_header->fw_info[i].substepping == '*' &&
stepping == package_header->fw_info[i].stepping) {
dmc_offset = package_header->fw_info[i].offset;
break;
} else if (stepping == package_header->fw_info[i].stepping &&
substepping == package_header->fw_info[i].substepping) {
dmc_offset = package_header->fw_info[i].offset;
break;
} else if (package_header->fw_info[i].stepping == '*' &&
package_header->fw_info[i].substepping == '*')
dmc_offset = package_header->fw_info[i].offset;
}
if (dmc_offset == CSR_DEFAULT_FW_OFFSET) {
DRM_ERROR("Firmware not supported for %c stepping\n", stepping);
goto out;
}
readcount += dmc_offset;
/* Extract dmc_header information. */
dmc_header = (struct intel_dmc_header *)&fw->data[readcount];
if (sizeof(struct intel_dmc_header) != (dmc_header->header_len)) {
DRM_ERROR("Firmware has wrong dmc header length %u bytes\n",
(dmc_header->header_len));
goto out;
}
readcount += sizeof(struct intel_dmc_header);
/* Cache the dmc header info. */
if (dmc_header->mmio_count > ARRAY_SIZE(csr->mmioaddr)) {
DRM_ERROR("Firmware has wrong mmio count %u\n",
dmc_header->mmio_count);
goto out;
}
csr->mmio_count = dmc_header->mmio_count;
for (i = 0; i < dmc_header->mmio_count; i++) {
if (dmc_header->mmioaddr[i] < CSR_MMIO_START_RANGE ||
dmc_header->mmioaddr[i] > CSR_MMIO_END_RANGE) {
DRM_ERROR(" Firmware has wrong mmio address 0x%x\n",
dmc_header->mmioaddr[i]);
goto out;
}
csr->mmioaddr[i] = dmc_header->mmioaddr[i];
csr->mmiodata[i] = dmc_header->mmiodata[i];
}
/* fw_size is in dwords, so multiplied by 4 to convert into bytes. */
nbytes = dmc_header->fw_size * 4;
if (nbytes > CSR_MAX_FW_SIZE) {
DRM_ERROR("CSR firmware too big (%u) bytes\n", nbytes);
goto out;
}
csr->dmc_fw_size = dmc_header->fw_size;
csr->dmc_payload = kmalloc(nbytes, GFP_KERNEL);
if (!csr->dmc_payload) {
DRM_ERROR("Memory allocation failed for dmc payload\n");
goto out;
}
dmc_payload = csr->dmc_payload;
memcpy(dmc_payload, &fw->data[readcount], nbytes);
/* load csr program during system boot, as needed for DC states */
intel_csr_load_program(dev);
fw_loaded = true;
DRM_DEBUG_KMS("Finished loading %s\n", dev_priv->csr.fw_path);
out:
if (fw_loaded)
intel_runtime_pm_put(dev_priv);
else
intel_csr_load_status_set(dev_priv, FW_FAILED);
release_firmware(fw);
}
/**
* intel_csr_ucode_init() - initialize the firmware loading.
* @dev: drm device.
*
* This function is called at the time of loading the display driver to read
* firmware from a .bin file and copied into a internal memory.
*/
void intel_csr_ucode_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_csr *csr = &dev_priv->csr;
int ret;
if (!HAS_CSR(dev))
return;
if (IS_SKYLAKE(dev))
csr->fw_path = I915_CSR_SKL;
else if (IS_BROXTON(dev_priv))
csr->fw_path = I915_CSR_BXT;
else {
DRM_ERROR("Unexpected: no known CSR firmware for platform\n");
intel_csr_load_status_set(dev_priv, FW_FAILED);
return;
}
#if 0
/*
* Obtain a runtime pm reference, until CSR is loaded,
* to avoid entering runtime-suspend.
*/
intel_runtime_pm_get(dev_priv);
/* CSR supported for platform, load firmware */
ret = request_firmware_nowait(THIS_MODULE, true, csr->fw_path,
&dev_priv->dev->pdev->dev,
GFP_KERNEL, dev_priv,
finish_csr_load);
if (ret) {
i915_firmware_load_error_print(csr->fw_path, ret);
intel_csr_load_status_set(dev_priv, FW_FAILED);
}
#endif
}
/**
* intel_csr_ucode_fini() - unload the CSR firmware.
* @dev: drm device.
*
* Firmmware unloading includes freeing the internal momory and reset the
* firmware loading status.
*/
void intel_csr_ucode_fini(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!HAS_CSR(dev))
return;
intel_csr_load_status_set(dev_priv, FW_FAILED);
kfree(dev_priv->csr.dmc_payload);
}
void assert_csr_loaded(struct drm_i915_private *dev_priv)
{
WARN_ONCE(intel_csr_load_status_get(dev_priv) != FW_LOADED,
"CSR is not loaded.\n");
WARN_ONCE(!I915_READ(CSR_PROGRAM(0)),
"CSR program storage start is NULL\n");
WARN_ONCE(!I915_READ(CSR_SSP_BASE), "CSR SSP Base Not fine\n");
WARN_ONCE(!I915_READ(CSR_HTP_SKL), "CSR HTP Not fine\n");
}