diff --git a/data/Vortex86MX-eng/docs/VRR_ENG.TXT b/data/Vortex86MX-eng/docs/VRR_ENG.TXT deleted file mode 100644 index 8a2e9ec850..0000000000 --- a/data/Vortex86MX-eng/docs/VRR_ENG.TXT +++ /dev/null @@ -1,104 +0,0 @@ -Vertical Refresh Rater - -Version 2.0 - -Copyright (C) 2003, Trans - - -Text Version 1.1 (02.08.03) - -Win text (cp1251). (DOS codepage text - see down.) -------------------------------------------------------------------------------- - -Contents: -1. Why it need? -2. Installation. -3. Using. -4. FAQ. -5. Support. - -1. Why it need? ---------------------- -The problem of "60 Hz" is falling stand before of users of MeOS in modern condisions. -As a rule, most modern computers consist of 17" monitor (all written later is not actual -for owners of LCD monitors). If on 14" or 15" monitors the problem of "60 Hz" not a -main, but with 17" monitor it's a most pantfull. And with more size monitors I have no -words for discusion: it's a slade-show. Of couse, all of the upper correlated with -standart interface of VESA. As for VESA 3.0 - yes, interface have more rich features, -but it have no possiblity of change videomode in protect mode (the Virtual86 not realized -in MeOS !!!!!). - -The MeOS not known as a detected devices on boot, it setting of standard VESA videomode -with 60 Hz vertical refrash rate ! - -This programm is a FreeWare. And distribute "AS IS ...". Author not -carreing responsibility for probable damage :) . - -!!!!!_Warning_!!!!!: -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -! On this time programm have a EXPERIMENTAL status (!). And this reason you have a ! -! chance destroy own device (monitor). Espesialy this taking attantionall users with ! -! monitor without of rate protection. ! -! If you decide using this util I have a suggestion: fill of information form and ! -! send me. ! -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -2. Installation. ------------------ -Extract file VRR (it's ordinary executed MeOS file) from archive and situated it on -C:\ root or MeOS floppy. In main, VRR may situated on any directory (you must have -possibility run this file under MeOS). - - -3. Using. ----------- -The VRR is a standard executed file of Menuet Operation System. You may send on -execute this file by SYSTREE or MASH. - -After redraw of programm window will be present of current vertical refrash rate -and table with possibiling videoregimes. It's sorrably, table have VERY small -videomode (the programm is experimental). - - Change of videomode - ~~~~~~~~~~~~~~~~~~~~~ -You may select interesting videomode using _ONLY_ numerical keys: 1,2,3,4 and 5. -In a first step you must select resolution of videoregime. In a second step - need -select of vertical refresh rate. All changes are indicated on screen in a the -programm window. After select videomode, to set mode you must press "Enter" or -button "Ok". Notification: in this time all executing MeOS programs will be -killing. It this needed for minimize artefacts of the screen. After change videomode -you have a two way. First way: you can not any doing and after 13 seconds waiting -return last videomode. Second way: press two-three time any key or some time mouse -click on artefacts of VRR (or this plase) and fixing selected mode. Also you have -possibility modification of horizontal screen size by button "Left"\"Right" or keys -"+\-". For correcting your select you may use button "Cancel". - -Also in programm realized return at initial videomode with 60 Hz vertical refresh -by button "Default". And you may return in last videomode by button "Return" or -key "r" - -Note: -~~~~~~ -In this time programm may change vertical refresh rate _ONLY_ by lowing screen -resolution, because this method will be using at most part videocard -(VGA, SVGA or modern) - -Example: -If you have videomode 1024x768x60Hz and if you want select 800x600x95Hz, you must -press key "3" and key "1". After that key "Enter" or button "Ok". And after redraw -screen two time click on last program window position. If need using button -"Left\Right" for correcting horizontal size. - -4. FAQ. ----------- - -5. Supports. ----------------- -All questions, notes and wishs you may send to author by following e-mail: - - transafe@rambler.ru - transafe@chat.ru - trans397@yahoo.com - -Using with enjoy! -Trans. diff --git a/data/eng/docs/VRR_ENG.TXT b/data/eng/docs/VRR_ENG.TXT deleted file mode 100644 index 8a2e9ec850..0000000000 --- a/data/eng/docs/VRR_ENG.TXT +++ /dev/null @@ -1,104 +0,0 @@ -Vertical Refresh Rater - -Version 2.0 - -Copyright (C) 2003, Trans - - -Text Version 1.1 (02.08.03) - -Win text (cp1251). (DOS codepage text - see down.) -------------------------------------------------------------------------------- - -Contents: -1. Why it need? -2. Installation. -3. Using. -4. FAQ. -5. Support. - -1. Why it need? ---------------------- -The problem of "60 Hz" is falling stand before of users of MeOS in modern condisions. -As a rule, most modern computers consist of 17" monitor (all written later is not actual -for owners of LCD monitors). If on 14" or 15" monitors the problem of "60 Hz" not a -main, but with 17" monitor it's a most pantfull. And with more size monitors I have no -words for discusion: it's a slade-show. Of couse, all of the upper correlated with -standart interface of VESA. As for VESA 3.0 - yes, interface have more rich features, -but it have no possiblity of change videomode in protect mode (the Virtual86 not realized -in MeOS !!!!!). - -The MeOS not known as a detected devices on boot, it setting of standard VESA videomode -with 60 Hz vertical refrash rate ! - -This programm is a FreeWare. And distribute "AS IS ...". Author not -carreing responsibility for probable damage :) . - -!!!!!_Warning_!!!!!: -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -! On this time programm have a EXPERIMENTAL status (!). And this reason you have a ! -! chance destroy own device (monitor). Espesialy this taking attantionall users with ! -! monitor without of rate protection. ! -! If you decide using this util I have a suggestion: fill of information form and ! -! send me. ! -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -2. Installation. ------------------ -Extract file VRR (it's ordinary executed MeOS file) from archive and situated it on -C:\ root or MeOS floppy. In main, VRR may situated on any directory (you must have -possibility run this file under MeOS). - - -3. Using. ----------- -The VRR is a standard executed file of Menuet Operation System. You may send on -execute this file by SYSTREE or MASH. - -After redraw of programm window will be present of current vertical refrash rate -and table with possibiling videoregimes. It's sorrably, table have VERY small -videomode (the programm is experimental). - - Change of videomode - ~~~~~~~~~~~~~~~~~~~~~ -You may select interesting videomode using _ONLY_ numerical keys: 1,2,3,4 and 5. -In a first step you must select resolution of videoregime. In a second step - need -select of vertical refresh rate. All changes are indicated on screen in a the -programm window. After select videomode, to set mode you must press "Enter" or -button "Ok". Notification: in this time all executing MeOS programs will be -killing. It this needed for minimize artefacts of the screen. After change videomode -you have a two way. First way: you can not any doing and after 13 seconds waiting -return last videomode. Second way: press two-three time any key or some time mouse -click on artefacts of VRR (or this plase) and fixing selected mode. Also you have -possibility modification of horizontal screen size by button "Left"\"Right" or keys -"+\-". For correcting your select you may use button "Cancel". - -Also in programm realized return at initial videomode with 60 Hz vertical refresh -by button "Default". And you may return in last videomode by button "Return" or -key "r" - -Note: -~~~~~~ -In this time programm may change vertical refresh rate _ONLY_ by lowing screen -resolution, because this method will be using at most part videocard -(VGA, SVGA or modern) - -Example: -If you have videomode 1024x768x60Hz and if you want select 800x600x95Hz, you must -press key "3" and key "1". After that key "Enter" or button "Ok". And after redraw -screen two time click on last program window position. If need using button -"Left\Right" for correcting horizontal size. - -4. FAQ. ----------- - -5. Supports. ----------------- -All questions, notes and wishs you may send to author by following e-mail: - - transafe@rambler.ru - transafe@chat.ru - trans397@yahoo.com - -Using with enjoy! -Trans. diff --git a/data/rus/docs/VRR_RUS.TXT b/data/rus/docs/VRR_RUS.TXT deleted file mode 100644 index 977b89f2e4..0000000000 --- a/data/rus/docs/VRR_RUS.TXT +++ /dev/null @@ -1,110 +0,0 @@ - -DOS codepage text: -_______________________________________________________________________________ - -Vertical Refresh Rater - -Версия 2.0 - -Copyright (C) 2003, Trans - - -Text Version 1.1 (02.08.03) - -Win text (cp1251). (DOS codepage text - see down.) -------------------------------------------------------------------------------- - -Содержание: -1. Зачем это надо? -2. Установка. -3. Использование. -4. Вопросы и ответы. -5. Поддержка. - -1. Зачем это надо? ---------------------- -Проблема "60 Гц" очень остро встает перед пользователями MeOS в современных -условиях. Как правило, большинство современных компьтеров комплектуется 17 -дюймовыми мониторами (все что написано ниже крайне не актуально для владельцев -ЖК мониторов). Если на 14 или 15 дюймовом мониторе еще можно как то смриться с -частотой вертикальной развертки 60 Гц, то уже при 17 дюймовом мониторе это -превращается в пытку. А про больших размеров мониторы вообще говорить не -хочется, т.к. это превращается почти в слайд-шоу. Конечно же все выше сказанное -относится к стандартному интерфейсу VESA. Сразу хочу предупредить вопросы по -поводу VESA 3.0 - да, интерфейс более богатый по возможностям, но и в нем нет -способа преключения видеорежима при работе процессора в защищенном режиме -(режим V86 в MeOS не реализован !!!). - -В связи с тем, что MeOS не умеет (еще не научили :) ) детектировать оборудование -компьютера при загрузке, устанавливаемый графический видеорежим имеет -стандартную частоту вертикальной развертки равную 60 Гц (!!!!!) - -Программа является свободно распространяемой (FreeWare) и поставляется -"Как есть...". Автор не несет ответственности за возможный причиненный -ущерб ( :) ). - -!!!!!_Предупреждение_!!!!!: -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -! На текущий момент программа носит ЭКСПЕРИМЕНТАЛЬНЫЙ (!) характер, поэтому ! -! всегда остается вероятность порчи оборудования (т.е. монитора). Особенно это! -! касается всех тех, чей монитор не имеет защиты от перегрузок по частоте. ! -! Для всех рискнувших - просьба -> Заполнить прилагающуюся информационную форму! ! -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -2. Установка. ---------------- -Извлечь файл VRR (исполняемый файл MeOS) из архива и поместить в корневой -каталог диска C:\ (Fat32. В принципе, может быть любой католог) или на -загрузочную дискету MeOS. - - -3. Использование. --------------------- -Файл VRR является стандарным исполняемым файлом операционной системы MeOS, -который можно запустить на исполнение, например, через SYSTREE или MASH. - -После появления окна программы, будет отображено текущее разрешение и таблица -возможных режимов и частот вертикальной развертки для них. К сожалению, -разверток пока очень мало (похоже на то, это очень крутой секрет или же этим -никто в серьез не занимался ввиду отпугивающей сложности. Во всяком случае в -сети крайне мало информации по этому поводу и по большей части приходится -догадываться о положении дел). - - Выбор и установка видорежима - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Видоережим с интересующей частотой можно выбрать _только_ (!!!!!) с помощью -цифровых клавиш: 1, 2, 3, 4, 5. Сначало нужно выбрать разрешение, а затем -частоту. Каждый выбор сопровождается индикацией на экране. Для установления -выбранного видеорежима нужно нажать клавишу 'Enter' или кнопку 'Ok'. После -перехода в выбранный видеорежим у вас есть 13 секунд выбора. Можно ничего не -делать и через это время вернетесь в исходный видеорежим, а можно нажать пару -раз какую-нибудь клавишу или кликнуть пару раз по "остаткам" (артефактам) -исходного окна программы и зафиксировать выбор. Размеры окна по горизотали -можно регулировать кнопками "Право\Лево" или клавишами "+\-". -Для корректировки выбора используйте кнопку "Cancel". - -В программе реализовано принудительное возвращение в исходный видеорежим с -частотой 60 Гц с помощью кнопки "Default". А так же можете вернуться в -последний рабочий режим с помощью кнопки "Return" или клавиши 'r'. - -Пример: -Установлен режим 1024х768 при 60 Гц. Нужно 800х600 при 95 Гц. -Действия: нажать '3', затем '1' и далее клавишу "Enter" или кнопку "Ok". -После перехода в выбранный видеорежим кликаем пару раз на "остатка" (или том -месте где было) окна. Далее при необходимости корректируем размер экрана по -горизонтали с помощью кнопок "Право\Лево" - - -4. Вопросы и ответы. ------------------------- - -5. Поддержка. ----------------- -Все вопросы, замечания и пожелания Вы можете направить автору по следующим адресам: - - transafe@rambler.ru - transafe@chat.ru - trans397@yahoo.com - -Пользуйтесь на здоровье! -Trans. diff --git a/programs/system/docpack/trunk/docpack.asm b/programs/system/docpack/trunk/docpack.asm index d76db23689..efc09c4a02 100755 --- a/programs/system/docpack/trunk/docpack.asm +++ b/programs/system/docpack/trunk/docpack.asm @@ -189,18 +189,16 @@ end if embed_file 'FASM.TXT' ;d embed_file 'MTDBG.TXT' ;e if lang eq ru - embed_file 'VRR_RUS.TXT' ;f - embed_file 'SYSFUNCR.TXT' ;g - embed_file 'STACK_RU.TXT' ;h - embed_file 'GROBFAR.TXT' ;i + embed_file 'SYSFUNCR.TXT' ;f + embed_file 'STACK_RU.TXT' ;g + embed_file 'GROBFAR.TXT' ;h else - embed_file 'VRR_ENG.TXT' ;f - embed_file 'SYSFUNCS.TXT' ;g - embed_file 'STACK.TXT' ;h - embed_file 'FARA.TXT' ;i + embed_file 'SYSFUNCS.TXT' ;f + embed_file 'STACK.TXT' ;g + embed_file 'FARA.TXT' ;h end if - embed_file 'KFAR_KEYS.TXT' ;j - embed_file 'INI.TXT' ;k + embed_file 'KFAR_KEYS.TXT' ;i + embed_file 'INI.TXT' ;j ; -- End of embedding area ------- dd 0