kolibrios/programs/ac97wav/trunk/ac97wav.asm
Andrey Halyavin (halyavin) 065b8d32b2 programs sources added
git-svn-id: svn://kolibrios.org@31 a494cfbc-eb01-0410-851d-a64ba20cac60
2006-01-03 09:43:31 +00:00

1085 lines
24 KiB
NASM

;---------------------------------------------------------------------
;
; MenuetOS AC97 WAV Player
;
; 0.03 November 10, 2004 doesn't halt if file not found
; 0.04 November 11, 2004 better positioning (with mouse)
; 0.05 November 14, 2004 internals clean up
; fixed cutting sound at the edges
; 0.06 November 17, 2004 fixed many bugs
; 0.07 Nov 20, 2004 deactivates text box when 'play' pressed
; stops playing before closing a window
; 0.08 Nov 24, 2004 added support for 8bit and mono modes
; +variable rate for some chipsets
;
; Use [flat assembler 1.56] to compile.
;
;---------------------------------------------------------------------
use32 ; turn on 32 bit mode
org 0x0 ; the program is placed at 0 offset
db 'MENUET01' ; 8-byte identifier of MenuetOS application
dd 0x01 ; header version (always 1)
dd START ; address of the beginning of the code
dd IMAGE_END ; size of the program's image
dd MEMORY_END ; how much memory does it need
dd STACK_P ; a pointer to the top of the stack
dd textbox_string
; dd 0x0 ; address of buffer for parameters (not used)
dd 0x0 ; reserved
;---------------------------------------------------------------------
include "lang.inc"
include "macros.inc" ; standart macros & constants
include "meosfunc.inc" ; MenuetOS API functions names
include "debug.inc" ; printing to debug board
include "constant.inc" ; BIT?? constants
include "ac97.inc" ; AC'97 constants
include "pci.inc" ; PCI interface
include "codec.inc" ; functions for configuring codec
include "frontend.inc" ; main window
;---------------------------------------------------------------------
; Uncomment these strings if you don't want to receive debug messages:
; macro dps str {} ; dps prints a string without CRLF
; macro dpd num {} ; prints unsigned decimal number
; macro pregs {} ; outputs EAX, EBX, ECX, EDX
; macro newline {} ; CRLF
; macro print str {} ; output a string with CRLF
; macro dph arg {} ; print hex number
;---------------------------------------------------------------------
;macro device id, addr { dd id, addr }
macro devices [id, str]
{
common
label supported_devices dword
forward
local string
dd id
dd string
forward
string db str
db 0
}
devices \
(ICH_DID shl 16) + INTEL_VID, "ICH" ,\
(ICH0_DID shl 16) + INTEL_VID, "ICH0" ,\
(ICH2_DID shl 16) + INTEL_VID, "ICH2" ,\
(ICH3_DID shl 16) + INTEL_VID, "ICH2" ,\
(ICH4_DID shl 16) + INTEL_VID, "ICH4" ,\
(ICH5_DID shl 16) + INTEL_VID, "ICH5" ,\
(MX440_DID shl 16) + INTEL_VID, "440MX" ,\
(SI7012_DID shl 16) + SIS_VID, "SI7012" ,\
(NFORCE_DID shl 16) + NVIDIA_VID, "NForce" ,\
(NFORCE2_DID shl 16) + NVIDIA_VID, "NForce2",\
(AMD8111_DID shl 16) + AMD_VID, "AMD8111",\
(AMD768_DID shl 16) + AMD_VID, "AMD768"
dd 0
;---------------------------------------------------------------------
;--- MAIN PROGRAM --------------------------------------------------
;---------------------------------------------------------------------
START:
; Print PCI version (for example, 2.16)
; mcall MF_PCI, 0
; mov bl, al
; movzx eax, ah
; dps "PCI version: "
; dpd eax
; movzx eax, bl
; dpd eax
; newline
; Check PCI access mechanism (must be 1 or 2)
mcall MF_PCI, 2
dec al
cmp al, 1
jna @f
print "Error: cannot access PCI bus."
jmp exit
; dps "PCI returned "
; movzx eax, al
; dpd eax
; newline
@@:
; Get last bus & then check all buses & devices
mcall MF_PCI, 1
mov [lastbus], al
; looking for a compatible device
mov [bus], -1
.next_bus:
inc [bus]
mov al, [lastbus]
cmp al, [bus]
jb .device_not_found
mov [devfn], 0
.next_devfn:
mov cl, 0
call pciRegRead32
mov edi, supported_devices
@@:
mov ebx, [edi]
test ebx, ebx
jz @f
cmp eax, ebx
jnz .skip
add edi, 4
mov [device_id], eax
mov edx, [edi]
call debug_outstr
jmp proceed
.skip:
add edi, 8
jmp @b
@@:
inc [devfn]
cmp [devfn], 255
jb .next_devfn
jmp .next_bus
.device_not_found:
print "Could not find Intel AC'97 compatible codec!"
print "1) Check if it's enabled in BIOS."
print "2) Check if your device is included in the device list."
jmp exit
proceed:
print " integrated AC97 audio codec detected."
mov eax, [device_id]
cmp eax, (ICH4_DID shl 16) + INTEL_VID
je .newich
cmp eax, (ICH5_DID shl 16) + INTEL_VID
jne .nonewich
.newich:
mov [AC97ICH4], 1
.nonewich:
cmp eax, (SI7012_DID shl 16) + SIS_VID
jne @f
mov [SI7012], 1
@@:
;---------------------------------------------------------------------
; Get NAMBAR register base port address & save it
mov cl, NAMBAR_REG
call pciRegRead16
and eax, 0xFFFE
mov [NAMBAR], ax
test eax, eax
jnz .mixer_base_ok
print "Error: Intel ICH based AC97 audio codec disabled in BIOS!"
jmp exit
.mixer_base_ok:
dps "NAMBAR: "
dph eax
; Get NABMBAR & save it
mov cl, NABMBAR_REG
call pciRegRead16
and eax, 0xFFC0
mov [NABMBAR], ax
test eax, eax
jnz .bm_base_ok
print "Error: Intel ICH based AC97 audio codec disabled in BIOS!"
jmp exit
.bm_base_ok:
dps " NABMBAR: "
dph eax
newline
;---------------------------------------------------------------------
; Get IRQ (not used)
mov cl, IRQ_REG
call pciRegRead8
mov [AC97IRQ], al
; Get Interrupt pin (not used)
mov cl, INT_REG
call pciRegRead8
mov [AC97INT], al
; AC97ICH4 should work then...
cmp [AC97ICH4], 1
jne .skip_ich4_init
mov cl, ICH4_CFG_REG ; 0x41
call pciRegRead8
or al, 0x1
mov dl, al
call pciRegWrite8
mov cl, 0x54
call pciRegRead16
and eax, 0xFFFF
dps "Power Control & Status: "
dph eax
newline
.skip_ich4_init:
;---------------------------------------------------------------------
mov cl, PCI_CMD_REG
call pciRegRead16 ; read PCI command register
mov dx, ax
or dx, IO_ENA+BM_ENA+BIT10 ; enable IO and bus master + disable
; interrupts
call pciRegWrite16
;---------------------------------------------------------------------
print "Enabling access to ports..."
movzx ecx, [NAMBAR]
mov edx, ecx
add edx, NAM_SIZE
mcall MF_PORTS, PRT_RESERVE
test eax, eax
jz @f
print "Error: couldn't enable access to ports"
jmp exit
@@:
movzx ecx, [NABMBAR]
mov edx, ecx
add edx, NABM_SIZE
mcall MF_PORTS, PRT_RESERVE
test eax, eax
jz @f
print "Error: couldn't enable access to ports"
jmp exit
@@:
;---------------------------------------------------------------------
; setup the Codec
mov eax, 48000
call codecConfig ; unmute codec, set rates.
test eax, eax
jnz @f
print "Error: cannot initialize AC97 device."
jmp fpexit
@@:
print "Congrutalations! Your device has been initialized properly!"
call print_info
;---------------------------------------------------------------------
; register reset the DMA engine.
mov edx, PO_CR_REG ; PCM out control register
mov al, RR ; reset
call NABMBAR_write_byte
;start fix for MM (1)
mcall MF_INTERNAL_SERVICES,ALLOC_PHYS_MEM,120*1024
test eax,eax
jz no_phys_buffers ;not enough memory
mov [phys_wav_buffer1],eax
add eax,60*1024
mov [phys_wav_buffer2],eax
mcall MF_INTERNAL_SERVICES,ALLOC_PHYS_MEM,32*8
test eax,eax
jnz @f
mcall MF_INTERNAL_SERVICES,FREE_PHYS_MEM,[phys_wav_buffer1]
jmp no_phys_buffers
@@:
mov [phys_bdl_buffer],eax
;end fix for MM (1)
; create Buffer Descriptors List
call prepare_BDL
; open player's window
mcall MF_THREAD, THR_CREATE, thread, thread_stack
; wait for command
.new_check:
cmp [status], ST_PLAY
jne @f
call play
@@:
cmp [status], ST_STOP
jne @f
call stop
@@:
cmp [status], ST_EXIT
je stopexit
mcall MF_DELAY, 10
jmp .new_check
stopexit:
call stop
fpexit:
; free ports
movzx ecx, [NAMBAR]
mov edx, ecx
add edx, NAM_SIZE
mcall MF_PORTS, PRT_FREE
movzx ecx, [NABMBAR]
mov edx, ecx
add edx, NABM_SIZE
mcall MF_PORTS, PRT_FREE
;---------------------------------------------------------------------
;start fix for MM (2)
mcall MF_INTERNAL_SERVICES,FREE_PHYS_MEM,[phys_bdl_buffer]
mcall MF_INTERNAL_SERVICES,FREE_PHYS_MEM,[phys_wav_buffer1]
;end fix for MM (2)
exit:
mcall MF_EXIT
no_phys_buffers:
print "allocation of physical buffers failed"
jmp exit
;---------------------------------------------------------------------
;--- FUNCTIONS -----------------------------------------------------
;---------------------------------------------------------------------
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; prepare_BDL - initializes BUFFER DESCRIPTORS LIST
prepare_BDL:
mov ecx, 32 / 2 ; make 32 entries in BDL
mov edi, BDL_BUFFER
; call get_my_address
mov ebx, 30*1024
cmp [SI7012], 1
jne @f
add ebx, ebx
@@:
; set buf. desc. 0 to start of data file in memory
push eax
; add eax, WAV_BUFFER1
;start fix for MM (6)
mov eax,[phys_wav_buffer1]
;end fix for MM (6)
stosd
; set length to 60k samples. 1 sample is 16 bit or 2 bytes.
mov eax, ebx ;60*1024 ; number of samples
or eax, BUP
stosd
mov eax, [esp]
; add eax, WAV_BUFFER2
;start fix for MM (7)
mov eax,[phys_wav_buffer2]
;end fix for MM (7)
stosd
mov eax, ebx ;60*1024
or eax, BUP
stosd
pop eax
loop @b
; tell the DMA engine where to find our list of Buffer Descriptors.
; eax = base addr!
;start fix for MM (3)
;copy to physical memory
mcall MF_INTERNAL_SERVICES,SET_PHYS_BUFFER,[phys_bdl_buffer],BDL_BUFFER,32*8
;physical address of bdl
mov eax,[phys_bdl_buffer]
;end fix for MM (3)
mov edx, PO_BDBAR_REG
; add eax, BDL_BUFFER
call NABMBAR_write_dword
ret
;---------------------------------------------------------------------
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; stop - stops current music
;; in: nothing
;; out: nothing
stop:
; print "STOP!"
push eax edx
mcall MF_DELAY, 10
mov edx, PO_CR_REG
mov al, 0
call NABMBAR_write_byte
cmp [status], ST_STOP
jne .exit
mov [status], ST_DONE
.exit:
pop edx eax
ret
;---------------------------------------------------------------------
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; play - plays wav file!
;; in: nothing
;; out: nothing (but sound :) !corrupts registers!
play:
; at first, reset file
mov [fileinfo.first_block], 0
mcall MF_SYSTREE, fileinfo ; load a block, returns error code in eax
; and size of the file in ebx
test eax, eax ; 0 - successful
jz @f
print "AC97: File not found!"
mov [status], ST_STOP
jmp .exit
@@:
shr ebx, 9 ; size_of_file / 512 = number_of_blocks
mov [file_size], ebx
mov al, [LOAD_BUFFER+32] ; bytes per sample
dec al
jz @f
cmp al, 3
je @f
sub al, [LOAD_BUFFER+22] ; channels
add al, 2
@@:
mov [wav_mode], al
pusha
movzx ebx,word [LOAD_BUFFER+24]
mov eax,48000
xor edx,edx
div ebx
mov [difference_of_frequency],al
; dph eax
mov ecx,edx
imul eax,ecx,10
xor edx,edx
div ebx
mov ecx,edx
imul ecx,10
push eax
mov eax,ecx
xor edx,edx
div ebx
; dph eax
cmp eax,5
jl .temp_15
pop eax
; dph eax
inc eax
jmp .temp_16
.temp_15:
pop eax
.temp_16:
mov [difference_of_frequency_1],al
; dph eax
xor edx,edx
movzx ebx,[difference_of_frequency]
imul ebx,10
add bl,[difference_of_frequency_1]
mov [difference_of_frequency_2],bl
; dph ebx
popa
movzx eax, word [LOAD_BUFFER+24]
;dps "Freq: "
;dpd eax
;newline
call set_sample_rate
; change the last_valid_index to the (current_index-1)
; the LVI register tells the DMA engine where to stop playing
call updateLVI
; if current index is odd, load buffer 1 then 0, jump to tuneLoop
; if it is even, buffers 0 then 1; tuneLoop1
call getCurrentIndex
and eax, BIT0
mov esi, eax
push eax
call update_next_buffer
pop eax
xor eax, 1
call update_next_buffer
; start playing!
mov edx, PO_CR_REG
mov al, RPBM
call NABMBAR_write_byte
jmp [jumpto+esi*4]
.tuneLoop:
; wait while the current_index is even
@@:
; dps "a"
mcall MF_DELAY, 7
call getCurrentIndex
test al, BIT0
jz @b ; loop if not ready yet
; print "fa"
call updateLVI
mov eax, 0
call update_next_buffer
test al, al
jnz .exit_wait
cmp [status], ST_PLAY
jne .exit
test [volume], 0x10000000 ; test volume_changed bit
je @f
mov al, byte [volume]
call setVolume
and [volume], 0x0FFFFFFF ; clear vloume_changed bit
@@:
.tuneLoop1:
@@:
; dps "b"
mcall MF_DELAY, 7
call getCurrentIndex
test al, BIT0
jnz @b ; loop if not ready yet
; print "fb"
cmp [status], ST_PLAY
jne .exit
call updateLVI
mov eax, 1
call update_next_buffer
test al, al
jnz .exit_wait
jmp .tuneLoop
.exit_wait:
mcall MF_DELAY, 30 ; a little pause - let the player finish
.exit:
ret
attempts db 0
buffers dd WAV_BUFFER1, WAV_BUFFER2
jumpto dd play.tuneLoop, play.tuneLoop1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; update_first_buffer - load a chunk into the first buffer, increments offset
;; in: eax = number - 0 or 1
;; out: error code, 0 - successful
update_next_buffer:
push esi edi
movzx edx, byte [wav_mode]
mov ecx, [blocks + edx * 4]
mov [fileinfo.blocks], ecx
mov esi, LOAD_BUFFER
mov edi, [buffers+eax*4]
push eax ;save buffer index
start_attempts:
mcall MF_SYSTREE, fileinfo
test eax, eax
jz @f
cmp [attempts],100
je @f
inc [attempts]
jmp start_attempts
dpd eax
newline
dpd [fileinfo.first_block]
newline
@@:
; print " loaded!"
push eax ebx edx
mov eax,ecx
xor edx,edx
imul eax,10
movzx ebx,[difference_of_frequency_2]
div ebx
mov ecx,eax
; mov ebx,10
; mov eax,edx
; xor edx,edx
; div ebx
; cmp edx,5
; jb temp_12_7
; inc ecx
; temp_12_7:
cmp edx,0
je temp_12_7
inc ecx
temp_12_7:
pop edx ebx
mov eax,[esp+4] ;restore buffer index
add [fileinfo.first_block], ecx ; +60Kb
call [convert + edx * 4]
;start fix for MM (4)
mov eax,[esp+4] ;restore buffer index
test eax,not 1
jz .ok
print "buffer index out of range"
dpd eax
jmp .ret
.ok:
push ebp
mov ebp,[phys_wav_buffer1+eax*4]
mov edi,[buffers+eax*4]
mcall MF_INTERNAL_SERVICES,SET_PHYS_BUFFER,ebp,edi,60*1024
pop ebp
.ret:
pop eax
add esp,4 ;pop buffer index
;end fix for MM (4)
pop edi esi
ret
c8mono:
mov [type_of_conversion],1
jmp for_all_type
c8mono_1:
lodsb
call c8mono_2
push ax
shl eax,16
pop ax
push eax
mov al,[esi]
call c8mono_2
push ax
shl eax,16
pop ax
mov ebx,eax
pop eax
jmp for_all_type_1
c8mono_2:
sub al, 0x80
cbw
imul ax, 255
ret
c8stereo:
mov [type_of_conversion],2
jmp for_all_type
c8stereo_1:
lodsb
call c8stereo_2
shl eax,16
lodsb
call c8stereo_2
push eax
mov al,[esi]
call c8stereo_2
shl eax,16
mov al,[esi+1]
call c8stereo_2
mov ebx,eax
pop eax
jmp for_all_type_1
c8stereo_2:
sub al, 0x80
cbw
imul ax, 255
ret
c16mono:
mov [type_of_conversion],3
jmp for_all_type
c16mono_1:
lodsw
push ax
shl eax,16
pop ax
mov bx,[esi]
shl ebx,16
mov bx,[esi]
jmp for_all_type_1
c16stereo:
for_all_type:
xor edx,edx
mov eax, 15*1024*10
movzx ebx,[difference_of_frequency_2]
xor edx,edx
div ebx
mov ecx,eax
; mov ebx,10
; mov eax,edx
; xor edx,edx
; div ebx
; cmp edx,5
; jb temp_12_6
; inc ecx
; temp_12_6:
cmp edx,0
je temp_12_6
inc ecx
temp_12_6:
c16stereo_1:
mov [znak],0
cmp [type_of_conversion],1
je c8mono_1
cmp [type_of_conversion],2
je c8stereo_1
cmp [type_of_conversion],3
je c16mono_1
lodsd
mov ebx,[esi]
for_all_type_1:
cmp eax,ebx
jne c16stereo_2
inc [znak]
c16stereo_2:
push eax
push ecx
sub eax,ebx
push eax
shl eax,16
movzx ebx,[difference_of_frequency]
inc ebx
xor edx,edx
div ebx
shr eax,16
mov ecx,eax
pop eax
xor ax,ax
xor edx,edx
div ebx
shl eax,16
mov cx,ax
mov ebx,ecx
pop ecx
pop eax
mov dl,[difference_of_frequency]
inc dl
@@:
temp_12:
cmp [difference_of_frequency_1],0
je temp_12_3
cmp [difference_of_frequency_1],5
jne temp_12_4
cmp [difference_of_frequency_4],2
jne temp_12_3
jmp temp_12_5
temp_12_4:
cmp [difference_of_frequency_4],10
jne temp_12_3
temp_12_5:
cmp [znak],0
jne temp_12_5_1
sub eax,ebx
jmp temp_12_5_2
temp_12_5_1:
add eax,ebx
temp_12_5_2:
stosd
inc [schetchik]
mov [difference_of_frequency_4],0
temp_12_3:
cmp [znak],0
jne temp_13
sub eax,ebx
jmp temp_14
temp_13:
add eax,ebx
temp_14:
cld
dec dl
jz temp_14_1
stosd
inc [schetchik]
inc [difference_of_frequency_4]
jmp temp_12
temp_14_1:
dec ecx
cmp ecx,0
; jnz c16stereo_1
jg c16stereo_1
newline
dph [schetchik]
temp_14_2:
cmp [schetchik],15360
jge temp_14_3
stosd
inc [schetchik]
jmp temp_14_2
temp_14_3:
newline
dph [schetchik]
cmp [schetchik],15360
je temp_14_4
; mov [edi-4],dword 0
sub edi,4
; sub esi,4
temp_14_4:
mov [schetchik],0
ret
difference_of_frequency db 0
difference_of_frequency_1 db 0
difference_of_frequency_2 db 0
difference_of_frequency_4 db 0
schetchik dd 0
znak db 0
type_of_conversion db 0
convert dd c8mono, c8stereo, c16mono, c16stereo
blocks dd 30, 60, 60, 120
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; get_my_address - get base address of the program in physical memory
;; in: nothing
;; out: eax = address
;start fix for MM (8)
;function shouldn't used.
;get_my_address:
; pushad
; mcall MF_PROCINFO, procinfo, PN_MYSELF
; popad
; mov eax, [procinfo.memory_start]
;ret
;end fix for MM (8)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; set the last valid index to something other than we're currently playing
;; so that we never end
;;
;; this routine just sets the last valid index to 1 less than the index
;; that we're currently playing, thus keeping it in and endless loop
;; input: none
;; output: none
updateLVI:
push eax
call getCurrentIndex
; dps "index "
; dpd eax
; newline
dec al
and al, INDEX_MASK
call setLastValidIndex
pop eax
ret
;---------------------------------------------------------------------
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; returns AL = current index value
getCurrentIndex:
push edx
mov edx, PO_CIV_REG
call NABMBAR_read_byte
pop edx
ret
;---------------------------------------------------------------------
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; input AL = index # to stop on
setLastValidIndex:
push edx
mov edx, PO_LVI_REG
call NABMBAR_write_byte
pop edx
ret
;---------------------------------------------------------------------
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; print_info - outputs debug information
;; in: nothing
;; out: nothing
print_info:
dps "BUS: "
movzx eax, [bus]
dph eax
dps " DEVFN: "
movzx eax, [devfn]
dph eax
dps " IRQ: "
movzx eax, [AC97IRQ]
dpd eax
newline
dps "CODEC_POWER_CTRL: "
mov edx, CODEC_POWER_CTRL_REG
call NAMBAR_read_word
dph eax
dps " (bits 0-3 should be set)"
newline
mov edx, 0x28
call NAMBAR_read_word
dph eax
dps " - supported features"
newline
mov edx, 0x2A
call NAMBAR_read_word
dph eax
dps " - config"
newline
mov edx, 0x2C
call NAMBAR_read_word
dph eax
dps " - PCM rate"
newline
ret
;---------------------------------------------------------------------
;--- DATA OF PROGRAM -----------------------------------------------
;---------------------------------------------------------------------
volume dd 15
fileinfo:
.mode dd 0 ; READ
.first_block dd 0
.blocks dd 120 ; 120 Kb
.dest dd LOAD_BUFFER ;file_data
.work dd work_area
; db "/HD/1/WINDOWS/MEDIA/WICEB7~1.WAV",0
;sz textbox_string, "/hd/1/testmuz/menuet11.wav",0
sz textbox_string, " ",0
; rb 256
;---------------------------------------------------------------------
IMAGE_END: ; end of program's image
rb 100-textbox_string.size
; textbox_string.size
;---------------------------------------------------------------------
device_id dd ? ; (device_id << 16) + vendor_id
lastbus db ? ; pci coordinates
bus db ?
devfn db ?
AC97ICH4 db ? ; Intel ICH4 codec flag
SI7012 db ? ; SiS SI7012 codec flag
NAMBAR dw ? ; Audio Mixers Registers (base)
NABMBAR dw ? ; Bus Master Registers (base)
AC97IRQ db ? ; Interrupt request
AC97INT db ? ; Interrupt pin
wav_mode db ? ; bits per sample & channels
;---------------------------------------------------------------------
ST_DONE = 0x0 ; for interacting with player's window
ST_PLAY = 0x1
ST_EXIT = 0x2
ST_STOP = 0x4
status db ?
;---------------------------------------------------------------------
phys_bdl_buffer rd 1
phys_wav_buffer1 rd 1
phys_wav_buffer2 rd 1
align 32
; Buffer Descriptors List
; ___________________________
; | physical address | dword
; |_________________________|
; | attr | length | dword max. length = 65535 samples
; |_________________________|
BDL_BUFFER:
rb 32*8 ; 32 descriptors, 8 bytes each
;---------------------------------------------------------------------
file_data:
WAV_BUFFER1:
rb 60 * 1024 ; 60 Kb
WAV_BUFFER2:
rb 60 * 1024
LOAD_BUFFER:
rb 60 * 1024
;---------------------------------------------------------------------
procinfo process_information
work_area:
rb 0x10000
;---------------------------------------------------------------------
rb 0x800
thread_stack:
rb 0x1000 ; for stack
STACK_P:
MEMORY_END: