kolibrios/kernel/trunk/fs/fs.inc
CleverMouse d59bc76c6d support for PnP disks, part 4: move NTFS,EXT2,/hd*,/bd* to the new interface
git-svn-id: svn://kolibrios.org@3742 a494cfbc-eb01-0410-851d-a64ba20cac60
2013-07-01 16:29:16 +00:00

681 lines
17 KiB
PHP
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2011. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; ;;
;; System service for filesystem call ;;
;; (C) 2004 Ville Turjanmaa, License: GPL ;;
;; 29.04.2006 Elimination of hangup after the ;;
;; expiration hd_wait_timeout (for LBA) - Mario79 ;;
;; 15.01.2005 get file size/attr/date, ;;
;; file_append (only for hd) - ATV ;;
;; 23.11.2004 test if hd/partition is set - ATV ;;
;; 18.11.2004 get_disk_info and more error codes - ATV ;;
;; 08.11.2004 expand_pathz and rename (only for hd) - ATV ;;
;; 20.10.2004 Makedir/Removedir (only for hd) - ATV ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
iglobal
if lang eq sp
include 'fs/fs-sp.inc'
else
dir0:
db 'HARDDISK '
db 'RAMDISK '
db 'FLOPPYDISK '
db 0
dir1:
db 'FIRST '
db 'SECOND '
db 'THIRD '
db 'FOURTH '
db 0
end if
not_select_IDE db 0
hd_address_table:
dd 0x1f0,0x00,0x1f0,0x10
dd 0x170,0x00,0x170,0x10
endg
file_system:
; IN:
;
; eax = 0 ; read file /RamDisk/First 6
; eax = 8 ; lba read
; eax = 15 ; get_disk_info
;
; OUT:
;
; eax = 0 : read ok
; eax = 1 : no hd base and/or partition defined
; eax = 2 : function is unsupported for this FS
; eax = 3 : unknown FS
; eax = 4 : partition not defined at hd
; eax = 5 : file not found
; eax = 6 : end of file
; eax = 7 : memory pointer not in application area
; eax = 8 : disk full
; eax = 9 : fat table corrupted
; eax = 10 : access denied
; eax = 11 : disk error
;
; ebx = size
; \begin{diamond}[18.03.2006]
; for subfunction 16 (start application) error codes must be negative
; because positive values are valid PIDs
; so possible return values are:
; eax > 0 : process created, eax=PID
; -0x10 <= eax < 0 : -eax is filesystem error code:
; eax = -1 = 0xFFFFFFFF : no hd base and/or partition defined
; eax = -3 = 0xFFFFFFFD : unknown FS
; eax = -5 = 0xFFFFFFFB : file not found
; eax = -6 = 0xFFFFFFFA : unexpected end of file (probably not executable file)
; eax = -9 = 0xFFFFFFF7 : fat table corrupted
; eax = -10 = 0xFFFFFFF6 : access denied
; -0x20 <= eax < -0x10: eax is process creation error code:
; eax = -0x20 = 0xFFFFFFE0 : too many processes
; eax = -0x1F = 0xFFFFFFE1 : not Menuet/Kolibri executable
; eax = -0x1E = 0xFFFFFFE2 : no memory
; ebx is not changed
; \end{diamond}[18.03.2006]
; Extract parameters
; add eax, std_application_base_address ; abs start of info block
cmp dword [eax+0], 15; GET_DISK_INFO
je fs_info
cmp dword [CURRENT_TASK], 1; no memory checks for kernel requests
jz no_checks_for_kernel
mov edx, eax
cmp dword [eax+0], 1
jnz .usual_check
mov ebx, [eax+12]
; add ebx,std_application_base_address
mov ecx, [eax+8]
call check_region
test eax, eax
jnz area_in_app_mem
.error_output:
mov esi, buffer_failed
call sys_msg_board_str
; mov eax,7
mov dword [esp+36], 7
ret
iglobal
buffer_failed db 'K : Buffer check failed',13,10,0
endg
.usual_check:
cmp dword [eax+0], 0
mov ecx, 512
jnz .small_size
mov ecx, [eax+8]
shl ecx, 9
.small_size:
mov ebx, [eax+12]
; add ebx,std_application_base_address
call check_region
test eax, eax
jz .error_output
area_in_app_mem:
mov eax, edx
no_checks_for_kernel:
fs_read:
mov ebx, [eax+20] ; program wants root directory ?
test bl, bl
je fs_getroot
test bh, bh
jne fs_noroot
fs_getroot:
; \begin{diamond}[18.03.2006]
; root - only read is allowed
; other operations return "access denied", eax=10
; (execute operation returns eax=-10)
cmp dword [eax], 0
jz .read_root
mov dword [esp+36], 10
ret
.read_root:
; \end{diamond}[18.03.2006]
mov esi, dir0
mov edi, [eax+12]
; add edi,std_application_base_address
mov ecx, 11
push ecx
; cld ; already is
rep movsb
mov al, 0x10
stosb
add edi, 32-11-1
pop ecx
rep movsb
stosb
and dword [esp+36], 0; ok read
mov dword [esp+24], 32*2; size of root
ret
fs_info: ;start of code - Mihasik
push eax
cmp [eax+21], byte 'r'
je fs_info_r
cmp [eax+21], byte 'R'
je fs_info_r
mov eax, 3 ;if unknown disk
xor ebx, ebx
xor ecx, ecx
xor edx, edx
jmp fs_info1
fs_info_r:
call ramdisk_free_space;if ramdisk
mov ecx, edi ;free space in ecx
shr ecx, 9 ;free clusters
mov ebx, 2847 ;total clusters
mov edx, 512 ;cluster size
xor eax, eax ;always 0
fs_info1:
pop edi
mov [esp+36], eax
mov [esp+24], ebx ; total clusters on disk
mov [esp+32], ecx ; free clusters on disk
mov [edi], edx ; cluster size in bytes
ret ;end of code - Mihasik
fs_noroot:
push dword [eax+0] ; read/write/delete/.../makedir/rename/lba/run
push dword [eax+4] ; 512 block number to read
push dword [eax+8] ; bytes to write/append or 512 blocks to read
mov ebx, [eax+12]
; add ebx,std_application_base_address
push ebx ; abs start of return/save area
lea esi, [eax+20] ; abs start of dir + filename
mov edi, [eax+16]
; add edi,std_application_base_address ; abs start of work area
call expand_pathz
push edi ; dir start
push ebx ; name of file start
mov eax, [edi+1]
cmp eax, 'RD '
je fs_yesramdisk
cmp eax, 'RAMD'
jne fs_noramdisk
fs_yesramdisk:
cmp byte [edi+1+11], 0
je fs_give_dir1
mov eax, [edi+1+12]
cmp eax, '1 '
je fs_yesramdisk_first
cmp eax, 'FIRS'
jne fs_noramdisk
fs_yesramdisk_first:
cmp dword [esp+20], 8; LBA read ramdisk
jne fs_no_LBA_read_ramdisk
mov eax, [esp+16] ; LBA block to read
mov ecx, [esp+8] ; abs pointer to return area
call LBA_read_ramdisk
jmp file_system_return
fs_no_LBA_read_ramdisk:
cmp dword [esp+20], 0; READ
jne fs_noramdisk_read
mov eax, [esp+4] ; fname
add eax, 2*12+1
mov ebx, [esp+16] ; block start
inc ebx
mov ecx, [esp+12] ; block count
mov edx, [esp+8] ; return
mov esi, [esp+0]
sub esi, eax
add esi, 12+1 ; file name length
call fileread
jmp file_system_return
fs_noramdisk_read:
fs_noramdisk:
;********************************************************************
mov eax, [edi+1]
cmp eax, 'FD '
je fs_yesflpdisk
cmp eax, 'FLOP'
jne fs_noflpdisk
fs_yesflpdisk:
call reserve_flp
cmp byte [edi+1+11], 0
je fs_give_dir1
mov eax, [edi+1+12]
cmp eax, '1 '
je fs_yesflpdisk_first
cmp eax, 'FIRS'
je fs_yesflpdisk_first
cmp eax, '2 '
je fs_yesflpdisk_second
cmp eax, 'SECO'
jne fs_noflpdisk
jmp fs_yesflpdisk_second
fs_yesflpdisk_first:
mov [flp_number], 1
jmp fs_yesflpdisk_start
fs_yesflpdisk_second:
mov [flp_number], 2
fs_yesflpdisk_start:
cmp dword [esp+20], 0; READ
jne fs_noflpdisk_read
mov eax, [esp+4] ; fname
add eax, 2*12+1
mov ebx, [esp+16] ; block start
inc ebx
mov ecx, [esp+12] ; block count
mov edx, [esp+8] ; return
mov esi, [esp+0]
sub esi, eax
add esi, 12+1 ; file name length
call floppy_fileread
jmp file_system_return
fs_noflpdisk_read:
fs_noflpdisk:
;*****************************************************************
old_path_harddisk:
mov eax, [edi+1]
cmp eax, 'HD '
je fs_yesharddisk
cmp eax, 'HARD'
jne fs_noharddisk
fs_yesharddisk:
cmp dword [esp+20], 8; LBA read
jne fs_no_LBA_read
mov eax, [esp+16] ; LBA block to read
lea ebx, [edi+1+12] ; pointer to FIRST/SECOND/THIRD/FOURTH
mov ecx, [esp+8] ; abs pointer to return area
call LBA_read
jmp file_system_return
fs_no_LBA_read:
hd_err_return:
fs_noharddisk:
; \begin{diamond}[18.03.2006]
mov eax, 5 ; file not found
; а может быть, возвращать другой код ошибки?
mov ebx, [esp+24+24]; do not change ebx in application
; \end{diamond}[18.03.2006]
file_system_return:
add esp, 24
mov [esp+36], eax
mov [esp+24], ebx
ret
fs_give_dir1:
; \begin{diamond}[18.03.2006]
; /RD,/FD,/HD - only read is allowed
; other operations return "access denied", eax=10
; (execute operation returns eax=-10)
cmp dword [esp+20], 0
jz .read
add esp, 20
pop ecx
mov dword [esp+36], 10
ret
.read:
; \end{diamond}[18.03.2006]
mov al, 0x10
mov ebx, 1
mov edi, [esp+8]
mov esi, dir1
fs_d1_new:
mov ecx, 11
; cld
rep movsb
stosb
add edi, 32-11-1
dec ebx
jne fs_d1_new
add esp, 24
and dword [esp+36], 0; ok read
mov dword [esp+24], 32*1; dir/data size
ret
LBA_read_ramdisk:
cmp [lba_read_enabled], 1
je lbarrl1
xor ebx, ebx
mov eax, 2
ret
lbarrl1:
cmp eax, 18*2*80
jb lbarrl2
xor ebx, ebx
mov eax, 3
ret
lbarrl2:
pushad
call restorefatchain
mov edi, ecx
mov esi, eax
shl esi, 9
add esi, RAMDISK
mov ecx, 512/4
; cld
rep movsd
popad
xor ebx, ebx
xor eax, eax
ret
LBA_read:
; IN:
;
; eax = LBA block to read
; ebx = pointer to FIRST/SECOND/THIRD/FOURTH
; ecx = abs pointer to return area
cmp [lba_read_enabled], 1
je lbarl1
mov eax, 2
ret
lbarl1:
pushad
mov ecx, ide_mutex
call mutex_lock
popad
push eax
push ecx
mov edi, hd_address_table
mov esi, dir1
mov eax, [ebx]
mov edx, '1 '
mov ecx, 4
blar0:
cmp eax, [esi]
je blar2
cmp eax, edx
je blar2
inc edx
add edi, 8
add esi, 11
dec ecx
jnz blar0
mov eax, 1
mov ebx, 1
jmp LBA_read_ret
blar2:
mov eax, [edi+0]
mov ebx, [edi+4]
mov [hdbase], eax
mov [hdid], ebx
call wait_for_hd_idle
cmp [hd_error], 0
jne hd_lba_error
; eax = hd port
; ebx = set for primary (0x00) or slave (0x10)
cli
mov edx, eax
inc edx
xor eax, eax
out dx, al
inc edx
inc eax
out dx, al
inc edx
mov eax, [esp+4]
out dx, al
shr eax, 8
inc edx
out dx, al
shr eax, 8
inc edx
out dx, al
shr eax, 8
inc edx
and al, 1+2+4+8
add al, bl
add al, 128+64+32
out dx, al
inc edx
mov al, 20h
out dx, al
sti
call wait_for_sector_buffer
cmp [hd_error], 0
jne hd_lba_error
cli
mov edi, [esp+0]
mov ecx, 256
sub edx, 7
cld
rep insw
sti
xor eax, eax
xor ebx, ebx
LBA_read_ret:
mov [hd_error], 0
mov [hd1_status], 0
add esp, 2*4
pushad
mov ecx, ide_mutex
call mutex_unlock
popad
ret
expand_pathz:
; IN:
; esi = asciiz path & file
; edi = buffer for path & file name
; OUT:
; edi = directory & file : / 11 + / 11 + / 11 - zero terminated
; ebx = /file name - zero terminated
; esi = pointer after source
push eax
push ecx
push edi;[esp+0]
pathz_start:
mov byte [edi], '/'
inc edi
mov al, 32
mov ecx, 11
cld
rep stosb ; clear filename area
sub edi, 11
mov ebx, edi ; start of dir/file name
pathz_new_char:
mov al, [esi]
inc esi
cmp al, 0
je pathz_end
cmp al, '/'
jne pathz_not_path
cmp edi, ebx ; skip first '/'
jz pathz_new_char
lea edi, [ebx+11] ; start of next directory
jmp pathz_start
pathz_not_path:
cmp al, '.'
jne pathz_not_ext
lea edi, [ebx+8] ; start of extension
jmp pathz_new_char
pathz_not_ext:
cmp al, 'a'
jb pathz_not_low
cmp al, 'z'
ja pathz_not_low
sub al, 0x20 ; char to uppercase
pathz_not_low:
mov [edi], al
inc edi
mov eax, [esp+0] ; start_of_dest_path
add eax, 512 ; keep maximum path under 512 bytes
cmp edi, eax
jb pathz_new_char
pathz_end:
cmp ebx, edi ; if path end with '/'
jnz pathz_put_zero ; go back 1 level
sub ebx, 12
pathz_put_zero:
mov byte [ebx+11], 0
dec ebx ; include '/' char into file name
pop edi
pop ecx
pop eax
ret
;*******************************************
;* string to number
;* input eax - 4 byte string
;* output eax - number
;*******************************************
StringToNumber:
; ПЕРЕВОД СТРОКОВОГО ЧИСЛА В ЧИСЛОВОЙ ВИД
; Вход:
; EDI - адрес строки с числом. Конец числа отмечен кодом 0Dh
; Выход:
; CF - индикатор ошибок:
; 0 - ошибок нет;
; 1 - ошибка
; Если CF=0, то AX - число.
push bx
push cx
push dx
push edi
mov [partition_string], eax
mov edi, partition_string
xor cx, cx
i1:
mov al, [edi]
cmp al, 32;13
je i_exit
; cmp al,'0'
; jb err
; cmp al,'9'
; ja err
sub al, 48
shl cx, 1
jc error
mov bx, cx
shl cx, 1
jc error
shl cx, 1
jc error
add cx, bx
jc error
cbw
add cx, ax
jc error
i3:
inc edi
jmp i1
i_exit:
mov ax, cx
clc
i4:
movzx eax, ax
pop edi
pop dx
pop cx
pop bx
ret
error:
stc
jmp i4
partition_string:
dd 0
db 32