kolibrios/kernel/trunk/kernel.asm
Ivan Baravy 7b51a89852 Use process_information structure in the kernel
Copied from the userspace macros.inc

git-svn-id: svn://kolibrios.org@9967 a494cfbc-eb01-0410-851d-a64ba20cac60
2024-01-15 05:16:31 +00:00

4491 lines
120 KiB
NASM
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Copyright (C) KolibriOS team 2004-2024. All rights reserved.
;; Kernel programmers are acknowledged in CREDITS.TXT
;;
;; Data in this file was originally part of MenuetOS project which is
;; distributed under the terms of GNU GPL. It is modified and redistributed as
;; part of KolibriOS project under the terms of GNU GPL.
;;
;; Copyright (C) MenuetOS 2000-2004 Ville Mikael Turjanmaa
;;
;; KolibriOS is distributed in the hope that it will be useful, but WITHOUT ANY
;; WARRANTY. No author or distributor accepts responsibility to anyone for the
;; consequences of using it or for whether it serves any particular purpose or
;; works at all, unless he says so in writing. Refer to the GNU General Public
;; License (the "GPL") for full details.
;
;; Everyone is granted permission to copy, modify and redistribute KolibriOS,
;; but only under the conditions described in the GPL. A copy of this license
;; is supposed to have been given to you along with KolibriOS so you can know
;; your rights and responsibilities. It should be in a file named COPYING.
;; Among other things, the copyright notice and this notice must be preserved
;; on all copies.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
format binary as "mnt"
include 'macros.inc'
include 'struct.inc'
$Revision$
USE_COM_IRQ = 1 ; make irq 3 and irq 4 available for PCI devices
VESA_1_2_VIDEO = 0 ; enable vesa 1.2 bank switch functions
; Enabling the next line will enable serial output console
;debug_com_base = 0x3f8 ; 0x3f8 is com1, 0x2f8 is com2, 0x3e8 is com3,
; 0x2e8 is com4, no irq's are used
include "proc32.inc"
include "kglobals.inc"
include "lang.inc"
include "encoding.inc"
include "const.inc"
iglobal
; The following variable, if equal to 1, duplicates debug output to the screen.
debug_direct_print db 0
; Start the first app (LAUNCHER) after kernel is loaded? (1=yes, 2 or 0=no)
launcher_start db 1
endg
max_processes = 255
tss_step = 128 + 8192 ; tss & i/o - 65535 ports, * 256=557056*4
os_stack = os_data_l - gdts ; GDTs
os_code = os_code_l - gdts
graph_data = 3 + graph_data_l - gdts
tss0 = tss0_l - gdts
app_code = 3 + app_code_l - gdts
app_data = 3 + app_data_l - gdts
app_tls = 3 + tls_data_l - gdts
pci_code_sel = pci_code_32-gdts
pci_data_sel = pci_data_32-gdts
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Included files:
;;
;; Kernel16.inc
;; - Booteng.inc English text for bootup
;; - Bootcode.inc Hardware setup
;; - Pci16.inc PCI functions
;;
;; Kernel32.inc
;; - Sys32.inc Process management
;; - Shutdown.inc Shutdown and restart
;; - Fat32.inc Read / write hd
;; - Vesa12.inc Vesa 1.2 driver
;; - Vesa20.inc Vesa 2.0 driver
;; - Vga.inc VGA driver
;; - Stack.inc Network interface
;; - Mouse.inc Mouse pointer
;; - Scincode.inc Window skinning
;; - Pci32.inc PCI functions
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; That is a loading and initialization code that also draws the blue screen
; menu with svn revision number near top right corner of the screen.
include "bootbios.inc"
use32
org $+KERNEL_BASE
align 4
B32:
mov ax, os_stack ; Selector for os
mov ds, ax
mov es, ax
mov fs, ax
mov gs, ax
mov ss, ax
mov esp, TMP_STACK_TOP ; Set stack
; CLEAR 0x280000 - HEAP_BASE
xor eax, eax
mov edi, CLEAN_ZONE
mov ecx, (HEAP_BASE - OS_BASE - CLEAN_ZONE) / 4
cld
rep stosd
; CLEAR KERNEL UNDEFINED GLOBALS
mov edi, endofcode - OS_BASE
mov ecx, 0x90000
sub ecx, edi
shr ecx, 2
rep stosd
; SAVE & CLEAR 0-0xffff
mov edi, 0x1000
mov ecx, 0x8000 / 4
rep stosd
mov edi, 0xa000
mov ecx, 0x6000 / 4
rep stosd
call test_cpu
bts [cpu_caps - OS_BASE], CAPS_TSC ;force use rdtsc
call acpi_locate
call init_BIOS32
; MEMORY MODEL
call mem_test
call init_mem
call init_page_map
; ENABLE PAGING
mov eax, sys_proc - OS_BASE + PROC.pdt_0
mov cr3, eax
mov eax, cr0
or eax, CR0_PG + CR0_WP
mov cr0, eax
lgdt [gdts]
jmp pword os_code:high_code
align 4
bios32_entry dd ?
tmp_page_tabs dd ?
use16
ap_init16:
cli
lgdt [cs:gdts_ap - ap_init16]
mov eax, [cs:cr3_ap - ap_init16]
mov cr3, eax
mov eax, [cs:cr4_ap - ap_init16]
mov cr4, eax
mov eax, CR0_PE + CR0_PG + CR0_WP
mov cr0, eax
jmp pword os_code:ap_init_high
align 16
gdts_ap:
dw gdte-gdts-1
dd gdts
dw 0
cr3_ap dd ?
cr4_ap dd ?
ap_init16_size = $ - ap_init16
use32
__DEBUG__ fix 1
__DEBUG_LEVEL__ fix 1
include 'init.inc'
org OS_BASE+$
include 'fdo.inc'
align 4
high_code:
mov ax, os_stack
mov bx, app_data
mov cx, app_tls
mov ss, ax
add esp, OS_BASE
mov ds, bx
mov es, bx
mov fs, cx
mov gs, bx
xor eax, eax
mov ebx, 0xFFFFF000 + PG_SHARED + PG_NOCACHE + PG_UWR
bt [cpu_caps], CAPS_PAT
setc al
shl eax, 7
or ebx, eax
mov eax, PG_GLOBAL
bt [cpu_caps], CAPS_PGE
jnc @F
or [sys_proc + PROC.pdt_0 + (OS_BASE shr 20)], eax
or ebx, eax
mov eax, cr4
or eax, CR4_PGE
mov cr4, eax
@@:
mov [pte_valid_mask], ebx
xor eax, eax
mov dword [sys_proc + PROC.pdt_0], eax
mov dword [sys_proc + PROC.pdt_0+4], eax
mov eax, cr3
mov cr3, eax ; flush TLB
mov ecx, pg_data.mutex
call mutex_init
mov ecx, disk_list_mutex
call mutex_init
mov ecx, keyboard_list_mutex
call mutex_init
mov ecx, unpack_mutex
call mutex_init
mov ecx, application_table_mutex
call mutex_init
mov ecx, ide_mutex
call mutex_init
mov ecx, ide_channel1_mutex
call mutex_init
mov ecx, ide_channel2_mutex
call mutex_init
mov ecx, ide_channel3_mutex
call mutex_init
mov ecx, ide_channel4_mutex
call mutex_init
mov ecx, ide_channel5_mutex
call mutex_init
mov ecx, ide_channel6_mutex
call mutex_init
;-----------------------------------------------------------------------------
; SAVE REAL MODE VARIABLES
;-----------------------------------------------------------------------------
; --------------- APM ---------------------
; init selectors
mov ebx, [BOOT.apm_entry] ; offset of APM entry point
movzx eax, word [BOOT.apm_code_32] ; real-mode segment base address of
; protected-mode 32-bit code segment
movzx ecx, word [BOOT.apm_code_16] ; real-mode segment base address of
; protected-mode 16-bit code segment
movzx edx, word [BOOT.apm_data_16] ; real-mode segment base address of
; protected-mode 16-bit data segment
shl eax, 4
mov [dword apm_code_32 + 2], ax
shr eax, 16
mov [dword apm_code_32 + 4], al
shl ecx, 4
mov [dword apm_code_16 + 2], cx
shr ecx, 16
mov [dword apm_code_16 + 4], cl
shl edx, 4
mov [dword apm_data_16 + 2], dx
shr edx, 16
mov [dword apm_data_16 + 4], dl
mov dword[apm_entry], ebx
mov word [apm_entry + 4], apm_code_32 - gdts
mov eax, dword[BOOT.apm_version] ; version & flags
mov [apm_vf], eax
; -----------------------------------------
mov al, [BOOT.dma] ; DMA access
mov [allow_dma_access], al
mov al, [BOOT.debug_print] ; If nonzero, duplicates debug output to the screen
mov [debug_direct_print], al
mov al, [BOOT.launcher_start] ; Start the first app (LAUNCHER) after kernel is loaded?
mov [launcher_start], al
mov eax, [BOOT.devicesdat_size]
mov [acpi_dev_size], eax
mov eax, [BOOT.devicesdat_data]
mov [acpi_dev_data], eax
mov esi, BOOT.bios_hd
movzx ecx, byte [esi-1]
mov [NumBiosDisks], ecx
mov edi, BiosDisksData
shl ecx, 2
rep movsd
; -------- Fast System Call init ----------
; Intel SYSENTER/SYSEXIT (AMD CPU support it too)
bt [cpu_caps], CAPS_SEP
jnc .SEnP ; SysEnter not Present
xor edx, edx
mov ecx, MSR_SYSENTER_CS
mov eax, os_code
wrmsr
mov ecx, MSR_SYSENTER_ESP
; mov eax, sysenter_stack ; Check it
xor eax, eax
wrmsr
mov ecx, MSR_SYSENTER_EIP
mov eax, sysenter_entry
wrmsr
.SEnP:
; AMD SYSCALL/SYSRET
cmp byte[cpu_vendor], 'A'
jne .noSYSCALL
mov eax, 0x80000001
cpuid
test edx, 0x800 ; bit_11 - SYSCALL/SYSRET support
jz .noSYSCALL
mov ecx, MSR_AMD_EFER
rdmsr
or eax, 1 ; bit_0 - System Call Extension (SCE)
wrmsr
; !!!! It`s dirty hack, fix it !!!
; Bits of EDX :
; Bit 3116 During the SYSRET instruction, this field is copied into the CS register
; and the contents of this field, plus 8, are copied into the SS register.
; Bit 150 During the SYSCALL instruction, this field is copied into the CS register
; and the contents of this field, plus 8, are copied into the SS register.
; mov edx, (os_code + 16) * 65536 + os_code
mov edx, 0x1B0008
mov eax, syscall_entry
mov ecx, MSR_AMD_STAR
wrmsr
.noSYSCALL:
; -----------------------------------------
stdcall alloc_page
stdcall map_page, tss-0xF80, eax, PG_SWR
stdcall alloc_page
stdcall map_page, tss+0x80, eax, PG_SWR
stdcall alloc_page
stdcall map_page, tss+0x1080, eax, PG_SWR
; LOAD IDT
call build_interrupt_table ;lidt is executed
;lidt [idtreg]
call init_kernel_heap
call init_fpu
mov eax, [xsave_area_size]
lea eax, [eax*2 + RING0_STACK_SIZE*2]
stdcall kernel_alloc, eax
mov [os_stack_seg], eax
lea esp, [eax + RING0_STACK_SIZE]
mov [tss._ss0], os_stack
mov [tss._esp0], esp
mov [tss._esp], esp
mov [tss._cs], os_code
mov [tss._ss], os_stack
mov [tss._ds], app_data
mov [tss._es], app_data
mov [tss._fs], app_data
mov [tss._gs], app_data
mov [tss._io], 128
;Add IO access table - bit array of permitted ports
mov edi, tss._io_map_0
xor eax, eax
not eax
mov ecx, 8192/4
rep stosd ; access to 4096*8=65536 ports
mov ax, tss0
ltr ax
mov eax, sys_proc
list_init eax
add eax, PROC.thr_list
list_init eax
call init_video
call init_pat_mtrr
mov [LFBAddress], LFB_BASE
mov ecx, bios_fb
call set_framebuffer
call init_malloc
stdcall alloc_kernel_space, 0x50000 ; FIXME check size
mov [default_io_map], eax
add eax, 0x2000
mov [ipc_tmp], eax
mov ebx, 0x1000
add eax, 0x40000
mov [proc_mem_map], eax
add eax, 0x8000
mov [proc_mem_pdir], eax
add eax, ebx
mov [proc_mem_tab], eax
add eax, ebx
mov [tmp_task_ptab], eax
add eax, ebx
mov [ipc_pdir], eax
add eax, ebx
mov [ipc_ptab], eax
stdcall kernel_alloc, (unpack.LZMA_BASE_SIZE + (unpack.LZMA_LIT_SIZE shl \
(unpack.lc + unpack.lp)))*4
mov [unpack.p], eax
call init_events
mov eax, srv.fd - SRV.fd
mov [srv.fd], eax
mov [srv.bk], eax
;Set base of graphic segment to linear address of LFB
mov eax, [LFBAddress] ; set for gs
mov [graph_data_l+2], ax
shr eax, 16
mov [graph_data_l+4], al
mov [graph_data_l+7], ah
stdcall kernel_alloc, [_display.win_map_size]
mov [_display.win_map], eax
xor eax, eax
inc eax
; set background
mov [BgrDrawMode], eax
mov [BgrDataWidth], eax
mov [BgrDataHeight], eax
mov [mem_BACKGROUND], 4
mov [img_background], static_background_data
; set clipboard
xor eax, eax
mov [clipboard_slots], eax
mov [clipboard_write_lock], eax
stdcall kernel_alloc, PAGE_SIZE
test eax, eax
jnz @f
dec eax
@@:
mov [clipboard_main_list], eax
call check_acpi
mov eax, [hpet_base]
test eax, eax
jz @F
stdcall map_io_mem, [hpet_base], 1024, PG_GLOBAL + PAT_UC + PG_SWR
mov [hpet_base], eax
mov eax, [eax+HPET_ID]
DEBUGF 1, "K : HPET caps %x\n", eax
call init_hpet
@@:
; SET UP OS TASK
mov esi, boot_setostask
call boot_log
mov edi, sys_proc + PROC.heap_lock
mov ecx, (PROC.ht_free - PROC.heap_lock)/4
xor eax, eax
cld
rep stosd
mov [edi], dword (PROC.pdt_0 - PROC.htab)/4 - 3
mov [edi+4], dword 3 ;reserve handles for stdin stdout and stderr
mov ecx, (PROC.pdt_0 - PROC.htab)/4
add edi, 8
inc eax
@@:
stosd
inc eax
cmp eax, ecx
jbe @B
mov [sys_proc + PROC.pdt_0_phys], sys_proc - OS_BASE + PROC.pdt_0
mov eax, -1
mov edi, thr_slot_map+4
mov [edi-4], dword 0xFFFFFFF8
stosd
stosd
stosd
stosd
stosd
stosd
stosd
mov [current_process], sys_proc
mov edx, SLOT_BASE + sizeof.APPDATA*1
mov ebx, [os_stack_seg]
add ebx, RING0_STACK_SIZE
add ebx, [xsave_area_size]
call setup_os_slot
mov dword [edx], 'IDLE'
sub [edx + APPDATA.saved_esp], 4
mov eax, [edx + APPDATA.saved_esp]
mov dword [eax], idle_thread
mov ecx, IDLE_PRIORITY
call scheduler_add_thread
mov edx, SLOT_BASE + sizeof.APPDATA*2
mov ebx, [os_stack_seg]
call setup_os_slot
mov dword [edx], 'OS'
xor ecx, ecx
call scheduler_add_thread
mov dword [current_slot_idx], 2
mov [thread_count], 2
mov dword [current_slot], SLOT_BASE + sizeof.APPDATA*2
; Move other CPUs to deep sleep, if it is useful
uglobal
use_mwait_for_idle db 0
endg
cmp [cpu_vendor+8], 'ntel'
jnz .no_wake_cpus
bt [cpu_caps+4], CAPS_MONITOR-32
jnc .no_wake_cpus
dbgstr 'using mwait for idle loop'
inc [use_mwait_for_idle]
mov ebx, [cpu_count]
cmp ebx, 1
jbe .no_wake_cpus
call create_trampoline_pgmap
mov [cr3_ap + OS_BASE], eax
mov eax, cr4
mov [cr4_ap + OS_BASE], eax
mov esi, OS_BASE + ap_init16
mov edi, OS_BASE + 8000h
mov ecx, (ap_init16_size + 3) / 4
rep movsd
mov eax, [LAPIC_BASE]
test eax, eax
jnz @f
stdcall map_io_mem, [acpi_lapic_base], 0x1000, PG_GLOBAL + PG_NOCACHE + PG_SWR
mov [LAPIC_BASE], eax
@@:
lea edi, [eax + APIC_ICRL]
mov esi, smpt+4
dec ebx
.wake_cpus_loop:
lodsd
push esi
xor esi, esi
inc esi
shl eax, 24
mov [edi+10h], eax
; assert INIT IPI
mov dword [edi], 0C500h
call delay_ms
@@:
test dword [edi], 1000h
jnz @b
; deassert INIT IPI
mov dword [edi], 8500h
call delay_ms
@@:
test dword [edi], 1000h
jnz @b
; send STARTUP IPI
mov dword [edi], 600h + (8000h shr 12)
call delay_ms
@@:
test dword [edi], 1000h
jnz @b
pop esi
dec ebx
jnz .wake_cpus_loop
mov eax, [cpu_count]
dec eax
@@:
cmp [ap_initialized], eax
jnz @b
mov eax, [cr3_ap + OS_BASE]
call free_page
.no_wake_cpus:
; REDIRECT ALL IRQ'S TO INT'S 0x20-0x2f
mov esi, boot_initirq
call boot_log
call init_irqs
mov esi, boot_picinit
call boot_log
call PIC_init
mov esi, boot_v86machine
call boot_log
; Initialize system V86 machine
call init_sys_v86
mov esi, boot_inittimer
call boot_log
; Initialize system timer (IRQ0)
call PIT_init
; Register ramdisk file system
if ~ defined extended_primary_loader
cmp [BOOT.rd_load_from], RD_LOAD_FROM_HD ; will be loaded later
je @f
end if
cmp [BOOT.rd_load_from], RD_LOAD_FROM_NONE
je @f
call register_ramdisk
;--------------------------------------
@@:
mov esi, boot_initapic
call boot_log
; Try to Initialize APIC
call APIC_init
mov esi, boot_enableirq
call boot_log
; Enable timer IRQ (IRQ0) and co-processor IRQ (IRQ13)
; they are used: when partitions are scanned, hd_read relies on timer
call unmask_timer
; Prevent duplicate timer IRQs in APIC mode
cmp [irq_mode], IRQ_APIC
jz @f
stdcall enable_irq, 2 ; @#$%! PIC
@@:
stdcall enable_irq, 13 ; co-processor
; Setup serial output console (if enabled)
if defined debug_com_base
; reserve port so nobody else will use it
xor ebx, ebx
mov ecx, debug_com_base
mov edx, debug_com_base+7
call r_f_port_area
; enable Divisor latch
mov dx, debug_com_base+3
mov al, 1 shl 7
out dx, al
; Set speed to 115200 baud (max speed)
mov dx, debug_com_base
mov al, 0x01
out dx, al
mov dx, debug_com_base+1
mov al, 0x00
out dx, al
; No parity, 8bits words, one stop bit, dlab bit back to 0
mov dx, debug_com_base+3
mov al, 3
out dx, al
; disable interrupts
mov dx, debug_com_base+1
mov al, 0
out dx, al
; clear + enable fifo (64 bits)
mov dx, debug_com_base+2
mov al, 0x7 + 1 shl 5
out dx, al
end if
;-----------------------------------------------------------------------------
; show SVN version of kernel on the message board
;-----------------------------------------------------------------------------
mov eax, [version_inf.rev]
DEBUGF 1, "K : kernel SVN r%d\n", eax
;-----------------------------------------------------------------------------
; show CPU count on the message board
;-----------------------------------------------------------------------------
mov eax, [cpu_count]
test eax, eax
jnz @F
mov al, 1 ; at least one CPU
@@:
DEBUGF 1, "K : %d CPU detected\n", eax
;-----------------------------------------------------------------------------
; detect Floppy drives
;-----------------------------------------------------------------------------
mov esi, boot_detectfloppy
call boot_log
include 'detect/dev_fd.inc'
;-----------------------------------------------------------------------------
; create pci-devices list
;-----------------------------------------------------------------------------
mov [pci_access_enabled], 1
call pci_enum
;-----------------------------------------------------------------------------
; initialisation IDE ATA code
;-----------------------------------------------------------------------------
include 'detect/init_ata.inc'
;-----------------------------------------------------------------------------
; initialisation AHCI code
;-----------------------------------------------------------------------------
jmp ahci_code_end
include 'blkdev/ahci.inc'
ahci_code_end:
call ahci_init
;-----------------------------------------------------------------------------
if 0
mov ax, [BOOT.sys_disk]
cmp ax, 'r1'; if using not ram disk, then load librares and parameters {SPraid.simba}
je no_lib_load
mov esi, boot_loadlibs
call boot_log
; LOADING LIBRARES
stdcall dll.Load, @IMPORT ; loading librares for kernel (.obj files)
call load_file_parse_table ; prepare file parse table
call set_kernel_conf ; configure devices and gui
no_lib_load:
end if
; Display APIC status
mov esi, boot_APIC_found
cmp [irq_mode], IRQ_APIC
je @f
mov esi, boot_APIC_nfound
@@:
call boot_log
; PRINT AMOUNT OF MEMORY
mov esi, boot_memdetect
call boot_log
movzx ecx, word [boot_y]
if lang eq ru
or ecx, (10+30*6) shl 16
else if lang eq sp
or ecx, (10+33*6) shl 16
else
or ecx, (10+29*6) shl 16
end if
sub ecx, 10
mov edx, 0xFFFFFF
mov ebx, [MEM_AMOUNT]
shr ebx, 20
xor edi, edi
mov eax, 0x00040000
inc edi
call display_number_force
; BUILD SCHEDULER
; call build_scheduler; sys32.inc
; mov esi, boot_devices
; call boot_log
include "detect/vortex86.inc" ; Vortex86 SoC detection code
stdcall load_pe_driver, szVidintel, 0
call usb_init
; SET PRELIMINARY WINDOW STACK AND POSITIONS
mov esi, boot_windefs
call boot_log
call set_window_defaults
; SET BACKGROUND DEFAULTS
mov esi, boot_bgr
call boot_log
call init_background
call calculatebackground
; RESERVE SYSTEM IRQ'S JA PORT'S
mov esi, boot_resirqports
call boot_log
call reserve_irqs_ports
mov [SLOT_BASE + APPDATA.window], window_data
mov [SLOT_BASE + sizeof.APPDATA + APPDATA.window], window_data + sizeof.WDATA
mov [SLOT_BASE + sizeof.APPDATA*2 + APPDATA.window], window_data + sizeof.WDATA*2
mov [window_data + WDATA.thread], SLOT_BASE
mov [window_data + sizeof.WDATA + WDATA.thread], SLOT_BASE + sizeof.APPDATA
mov [window_data + sizeof.WDATA*2 + WDATA.thread], SLOT_BASE + sizeof.APPDATA*2
call init_display
mov eax, [def_cursor]
mov [window_data + sizeof.WDATA + WDATA.cursor], eax
mov [window_data + sizeof.WDATA*2 + WDATA.cursor], eax
; PRINT CPU FREQUENCY
mov esi, boot_cpufreq
call boot_log
cli
mov ebx, [hpet_base]
test ebx, ebx
jz @F
mov ebx, [ebx + HPET_COUNTER]
rdtsc
mov ecx, 1000
sub eax, [hpet_tsc_start]
sbb edx, [hpet_tsc_start + 4]
shld edx, eax, 10
shl eax, 10
mov esi, eax
mov eax, edx
mul ecx
xchg eax, esi
mul ecx
adc edx, esi
div ebx
mul ecx
div [hpet_period]
mul ecx
DEBUGF 1, "K : cpu frequency %u Hz\n", eax
jmp .next
@@:
rdtsc
mov ecx, eax
mov esi, 250 ; wait 1/4 a second
call delay_ms
rdtsc
sub eax, ecx
xor edx, edx
shld edx, eax, 2
shl eax, 2
.next:
mov dword [cpu_freq], eax
mov dword [cpu_freq + 4], edx
mov ebx, 1000000
div ebx
mov ebx, eax
movzx ecx, word [boot_y]
if lang eq ru
add ecx, (10+19*6) shl 16 - 10
else if lang eq sp
add ecx, (10+25*6) shl 16 - 10
else
add ecx, (10+17*6) shl 16 - 10
end if
mov edx, 0xFFFFFF
xor edi, edi
mov eax, 0x00040000
inc edi
call display_number_force
; SET VARIABLES
call set_variables
; STACK AND FDC
call stack_init
call fdc_init
; PALETTE FOR 320x200 and 640x480 16 col
cmp [SCR_MODE], word 0x12
jne no_pal_vga
mov esi, boot_pal_vga
call boot_log
call paletteVGA
no_pal_vga:
cmp [SCR_MODE], word 0x13
jne no_pal_ega
mov esi, boot_pal_ega
call boot_log
call palette320x200
no_pal_ega:
; LOAD DEFAULT SKIN
call load_default_skin
; Protect I/O permission map
mov esi, [default_io_map]
stdcall map_page, esi, [SLOT_BASE + sizeof.APPDATA + APPDATA.io_map], PG_READ
add esi, 0x1000
stdcall map_page, esi, [SLOT_BASE + sizeof.APPDATA + APPDATA.io_map + 4], PG_READ
stdcall map_page, tss._io_map_0, \
[SLOT_BASE + sizeof.APPDATA + APPDATA.io_map], PG_READ
stdcall map_page, tss._io_map_1, \
[SLOT_BASE + sizeof.APPDATA + APPDATA.io_map + 4], PG_READ
; SET KEYBOARD PARAMETERS
mov al, 0xf6 ; reset keyboard, scan enabled
call kb_write_wait_ack
test ah, ah
jnz .no_keyboard
iglobal
align 4
ps2_keyboard_functions:
dd .end - $
dd 0 ; no close
dd ps2_set_lights
.end:
endg
stdcall register_keyboard, ps2_keyboard_functions, 0
; mov al, 0xED ; Keyboard LEDs - only for testing!
; call kb_write_wait_ack
; mov al, 111b
; call kb_write_wait_ack
mov al, 0xF3 ; set repeat rate & delay
call kb_write_wait_ack
mov al, 0; 30 250 ;00100010b ; 24 500 ;00100100b ; 20 500
call kb_write_wait_ack
;// mike.dld [
call set_lights
;// mike.dld ]
stdcall attach_int_handler, 1, irq1, 0
DEBUGF 1, "K : IRQ1 return code %x\n", eax
.no_keyboard:
; Load PS/2 mouse driver
mov esi, boot_setmouse
call boot_log
stdcall load_pe_driver, szPS2MDriver, 0
; LOAD FIRST APPLICATION
cmp byte [launcher_start], 1 ; Check if starting LAUNCHER is selected on blue screen (1 = yes)
jnz first_app_found
cli
mov ebp, firstapp
call fs_execute_from_sysdir
test eax, eax
jns first_app_found
mov esi, boot_failed
call boot_log
mov eax, 0xDEADBEEF ; otherwise halt
hlt
first_app_found:
; START MULTITASKING
preboot_blogesc = 0 ; start immediately after bootlog
; A 'All set - press ESC to start' messages if need
if preboot_blogesc
mov esi, boot_tasking
call boot_log
.bll1:
in al, 0x60 ; wait for ESC key press
cmp al, 129
jne .bll1
end if
mov [timer_ticks_enable], 1 ; for cd driver
sti
call mtrr_validate
jmp osloop
; Fly :)
uglobal
align 4
ap_initialized dd 0
endg
ap_init_high:
mov ax, os_stack
mov bx, app_data
mov cx, app_tls
mov ss, ax
mov ds, bx
mov es, bx
mov fs, cx
mov gs, bx
xor esp, esp
mov eax, sys_proc - OS_BASE + PROC.pdt_0
mov cr3, eax
lock inc [ap_initialized]
jmp idle_loop
include 'unpacker.inc'
align 4
boot_log:
pushad
mov ebx, 10*65536
mov bx, word [boot_y]
add [boot_y], dword 10
mov ecx, 0x80ffffff; ASCIIZ string with white color
xor edi, edi
mov edx, esi
inc edi
call dtext
mov [novesachecksum], 1000
call checkVga_N13
popad
ret
;-----------------------------------------------------------------------------
; Register ramdisk file system
register_ramdisk:
mov esi, boot_initramdisk
call boot_log
call ramdisk_init
ret
; in: edx -> APPDATA for OS/IDLE slot
; in: ebx = stack base
proc setup_os_slot
xor eax, eax
mov ecx, sizeof.APPDATA/4
mov edi, edx
rep stosd
mov eax, tss+0x80
call get_pg_addr
inc eax
mov [edx + APPDATA.io_map], eax
mov eax, tss+0x1080
call get_pg_addr
inc eax
mov [edx + APPDATA.io_map + 4], eax
mov dword [edx + APPDATA.pl0_stack], ebx
lea edi, [ebx + RING0_STACK_SIZE]
mov dword [edx + APPDATA.fpu_state], edi
mov dword [edx + APPDATA.saved_esp0], edi
mov dword [edx + APPDATA.saved_esp], edi
mov dword [edx + APPDATA.terminate_protection], 1 ; make unkillable
mov esi, fpu_data
mov ecx, [xsave_area_size]
add ecx, 3
shr ecx, 2
rep movsd
lea eax, [edx + APP_EV_OFFSET]
mov dword [edx + APPDATA.fd_ev], eax
mov dword [edx + APPDATA.bk_ev], eax
lea eax, [edx + APP_OBJ_OFFSET]
mov dword [edx + APPDATA.fd_obj], eax
mov dword [edx + APPDATA.bk_obj], eax
mov dword [edx + APPDATA.cur_dir], sysdir_path-2
mov [edx + APPDATA.process], sys_proc
lea ebx, [edx + APPDATA.list]
lea ecx, [sys_proc + PROC.thr_list]
list_add_tail ebx, ecx
mov [edx + APPDATA.wnd_number], dh
mov byte [edx + APPDATA.tid], dh
movzx eax, dh
shl eax, BSF sizeof.WDATA
add eax, window_data
mov [edx + APPDATA.window], eax
ret
endp
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ;
; MAIN OS LOOP START ;
; ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 32
osloop:
mov edx, osloop_has_work?
xor ecx, ecx
call Wait_events
xor eax, eax
xchg eax, [osloop_nonperiodic_work]
test eax, eax
jz .no_periodic
call __sys_draw_pointer
call window_check_events
call mouse_check_events
call checkmisc
call checkVga_N13
;--------------------------------------
.no_periodic:
call stack_handler
call check_fdd_motor_status
call check_ATAPI_device_event
call check_lights_state
call check_timers
jmp osloop
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ;
; MAIN OS LOOP END ;
; ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc osloop_has_work?
cmp [osloop_nonperiodic_work], 0
jnz .yes
call stack_handler_has_work?
jnz .yes
call check_fdd_motor_status_has_work?
jnz .yes
call check_ATAPI_device_event_has_work?
jnz .yes
call check_lights_state_has_work?
jnz .yes
call check_timers_has_work?
jnz .yes
.no:
xor eax, eax
ret
.yes:
xor eax, eax
inc eax
ret
endp
proc wakeup_osloop
mov [osloop_nonperiodic_work], 1
ret
endp
uglobal
align 4
osloop_nonperiodic_work dd ?
endg
uglobal
align 64
idle_addr rb 64
endg
idle_thread:
sti
; The following code can be executed by all CPUs in the system.
; All other parts of the kernel do not expect multi-CPU.
; Also, APs don't even have a stack here.
; Beware. Don't do anything here. Anything at all.
idle_loop:
cmp [use_mwait_for_idle], 0
jnz .mwait
.hlt:
hlt
jmp .hlt
.mwait:
mov eax, idle_addr
xor ecx, ecx
xor edx, edx
monitor
xor ecx, ecx
mov eax, 20h ; or 10h
mwait
jmp .mwait
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ;
; INCLUDED SYSTEM FILES ;
; ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
include "kernel32.inc"
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ;
; KERNEL FUNCTIONS ;
; ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
reserve_irqs_ports:
; RESERVE PORTS
mov eax, RESERVED_PORTS
mov ecx, 1
mov [eax], dword 4
mov [eax+16], ecx
mov [eax+16+4], dword 0
mov [eax+16+8], dword 0x2D
mov [eax+32], ecx
mov [eax+32+4], dword 0x30
mov [eax+32+8], dword 0x4D
mov [eax+48], ecx
mov [eax+48+4], dword 0x50
mov [eax+48+8], dword 0xDF
mov [eax+64], ecx
mov [eax+64+4], dword 0xE5
mov [eax+64+8], dword 0xFF
ret
iglobal
process_number dd 0x2
endg
set_variables:
mov ecx, 0x16 ; flush port 0x60
@@:
in al, 0x60
loop @b
push eax
mov ax, [BOOT.y_res]
shr ax, 1
shl eax, 16
mov ax, [BOOT.x_res]
shr ax, 1
mov [MOUSE_X], eax
call wakeup_osloop
xor eax, eax
mov [BTN_ADDR], dword BUTTON_INFO ; address of button list
mov byte [KEY_COUNT], al ; keyboard buffer
mov byte [BTN_COUNT], al ; button buffer
pop eax
ret
;-----------------------------------------------------------------------------
align 4
display_number:
; add check pointers
test bl, bl
jz @f
bt ebx, 30 ; check 30 bit
jb @f
stdcall is_region_userspace, ecx, 4
jz @f
ret
@@:
jz @f
stdcall is_region_userspace, ecx, 8
jz @f
ret
@@:
test esi, 0x08000000
jz @f
stdcall is_region_userspace, edi, 1
jz @f
ret
@@:
;It is not optimization
mov eax, ebx
mov ebx, ecx
mov ecx, edx
mov edx, esi
mov esi, edi
; eax = print type, al=0 -> ebx is number
; al=1 -> ebx is pointer
; ah=0 -> display decimal
; ah=1 -> display hexadecimal
; ah=2 -> display binary
; eax bits 16-21 = number of digits to display (0-32)
; eax bits 22-31 = reserved
;
; ebx = number or pointer
; ecx = x shl 16 + y
; edx = color
xor edi, edi
display_number_force:
push eax
and eax, 0x3fffffff
cmp eax, 0xffff ; length > 0 ?
pop eax
jge .cont_displ
ret
.cont_displ:
push eax
and eax, 0x3fffffff
cmp eax, 61*0x10000 ; length <= 60 ?
pop eax
jb .cont_displ2
ret
.cont_displ2:
pushad
cmp al, 1 ; ecx is a pointer ?
jne @f
mov ebp, ebx
add ebp, 4
mov ebp, [ebp] ;[ebp + std_application_base_address]
mov ebx, [ebx] ;[ebx + std_application_base_address]
@@:
sub esp, 64
test ah, ah ; DECIMAL
jnz .no_display_desnum
shr eax, 16
and eax, 0xC03f
; and eax,0x3f
push eax
and eax, 0x3f
mov edi, esp
add edi, 4+64-1
mov ecx, eax
mov eax, ebx
mov ebx, 10
@@:
xor edx, edx
call division_64_bits
div ebx
add dl, 48
mov [edi], dl
dec edi
loop @b
pop eax
call normalize_number
call draw_num_text
add esp, 64
popad
ret
.no_display_desnum:
cmp ah, 0x01 ; HEXADECIMAL
jne .no_display_hexnum
shr eax, 16
and eax, 0xC03f
; and eax,0x3f
push eax
and eax, 0x3f
mov edi, esp
add edi, 4+64-1
mov ecx, eax
mov eax, ebx
mov ebx, 16
@@:
xor edx, edx
call division_64_bits
div ebx
;hexletters = __fdo_hexdigits
add edx, __fdo_hexdigits ;hexletters
mov dl, [edx]
mov [edi], dl
dec edi
loop @b
pop eax
call normalize_number
call draw_num_text
add esp, 64
popad
ret
.no_display_hexnum:
cmp ah, 0x02 ; BINARY
jne .no_display_binnum
shr eax, 16
and eax, 0xC03f
; and eax,0x3f
push eax
and eax, 0x3f
mov edi, esp
add edi, 4+64-1
mov ecx, eax
mov eax, ebx
mov ebx, 2
@@:
xor edx, edx
call division_64_bits
div ebx
add dl, 48
mov [edi], dl
dec edi
loop @b
pop eax
call normalize_number
call draw_num_text
add esp, 64
popad
ret
.no_display_binnum:
add esp, 64
popad
ret
normalize_number:
test ah, 0x80
jz .continue
mov ecx, 48
and eax, 0x3f
@@:
inc edi
cmp [edi], cl
jne .continue
dec eax
cmp eax, 1
ja @r
mov al, 1
.continue:
and eax, 0x3f
ret
division_64_bits:
test [esp+1+4], byte 0x40
jz .continue
push eax
mov eax, ebp
div ebx
mov ebp, eax
pop eax
.continue:
ret
draw_num_text:
mov esi, eax
mov edx, 64+4
sub edx, eax
add edx, esp
mov ebx, [esp+64+32-8+4]
; add window start x & y
mov ecx, [current_slot]
mov ecx, [ecx + APPDATA.window]
mov eax, [ecx + WDATA.box.left]
add eax, [ecx + WDATA.clientbox.left]
shl eax, 16
add eax, [ecx + WDATA.box.top]
add eax, [ecx + WDATA.clientbox.top]
add ebx, eax
mov ecx, [esp+64+32-12+4]
mov eax, [esp+64+8] ; background color (if given)
mov edi, [esp+64+4]
and ecx, 5FFFFFFFh
bt ecx, 27
jnc @f
mov edi, eax
@@:
jmp dtext
;-----------------------------------------------------------------------------
align 4
sys_setup:
; 1 = roland mpu midi base , base io address
; 2 = keyboard 1, base kaybap 2, shift keymap, 9 country 1eng 2fi 3ger 4rus
; 3 = not used
; 4 = not used
; 5 = system language, 1eng 2fi 3ger 4rus
; 6 = not used
; 7 = not used
; 8 = not used
; 9 = not used
; 10 = not used
; 11 = enable lba read
; 12 = enable pci access
;-----------------------------------------------------------------------------
and [esp + SYSCALL_STACK.eax], dword 0
; F.21.1 - set MPU MIDI base port
dec ebx
jnz @f
cmp ecx, 0x100
jb @f
mov esi, 65535
cmp esi, ecx
jb @f
mov [midi_base], cx
mov word [mididp], cx
inc cx
mov word [midisp], cx
ret
;--------------------------------------
@@:
; F.21.2 - set keyboard layout
dec ebx
jnz @f
mov eax, edx
; 1 = normal layout
dec ecx
jnz .shift
mov ebx, keymap
mov ecx, 128
call memmove
ret
;--------------------------------------
.shift:
; 2 = layout at pressed Shift
dec ecx
jnz .alt
mov ebx, keymap_shift
mov ecx, 128
call memmove
ret
;--------------------------------------
.alt:
; 3 = layout at pressed Alt
dec ecx
jnz .country
mov ebx, keymap_alt
mov ecx, 128
call memmove
ret
;--------------------------------------
.country:
; country identifier
sub ecx, 6
jnz .error
mov word [keyboard], dx
ret
;--------------------------------------
@@:
; F.21.5 - set system language
sub ebx, 3
jnz @f
mov [syslang], ecx
ret
;--------------------------------------
@@:
; F.21.11 - enable/disable low-level access to HD
and ecx, 1
sub ebx, 6
jnz @f
mov [lba_read_enabled], ecx
ret
;--------------------------------------
@@:
; F.21.12 - enable/disable low-level access to PCI
dec ebx
jnz .error
mov [pci_access_enabled], ecx
ret
;--------------------------------------
.error:
or [esp + SYSCALL_STACK.eax], dword -1
ret
;-----------------------------------------------------------------------------
align 4
sys_getsetup:
; 1 = roland mpu midi base , base io address
; 2 = keyboard 1, base kaybap 2, shift keymap, 9 country 1eng 2fi 3ger 4rus
; 3 = not used
; 4 = not used
; 5 = system language, 1eng 2fi 3ger 4rus
; 6 = not used
; 7 = not used
; 8 = not used
; 9 = get hs timer tic
; 10 = not used
; 11 = get the state "lba read"
; 12 = get the state "pci access"
;-----------------------------------------------------------------------------
; F.26.1 - get MPU MIDI base port
dec ebx
jnz @f
movzx eax, [midi_base]
mov [esp + SYSCALL_STACK.eax], eax
ret
;--------------------------------------
@@:
; F.26.2 - get keyboard layout
dec ebx
jnz @f
mov ebx, edx
; if given memory address belongs to kernel then error
stdcall is_region_userspace, ebx, 128
jnz .addr_error
; 1 = normal layout
dec ecx
jnz .shift
mov eax, keymap
mov ecx, 128
call memmove
ret
;--------------------------------------
.shift:
; 2 = layout with pressed Shift
dec ecx
jnz .alt
mov eax, keymap_shift
mov ecx, 128
call memmove
ret
;--------------------------------------
.alt:
; 3 = layout with pressed Alt
dec ecx
jne .country
mov eax, keymap_alt
mov ecx, 128
call memmove
ret
;--------------------------------------
.country:
; 9 = country identifier
sub ecx, 6
jnz .error
movzx eax, word [keyboard]
mov [esp + SYSCALL_STACK.eax], eax
ret
.addr_error: ; if given memory address is illegal
or dword [esp + SYSCALL_STACK.eax], -1
ret
;--------------------------------------
@@:
; F.26.5 - get system language
sub ebx, 3
jnz @f
mov eax, [syslang]
mov [esp + SYSCALL_STACK.eax], eax
ret
;--------------------------------------
@@:
; F.26.9 - get the value of the time counter
sub ebx, 4
jnz @f
mov eax, [timer_ticks]
mov [esp + SYSCALL_STACK.eax], eax
ret
;--------------------------------------
@@:
; F.26.10 - get the time from kernel launch in nanoseconds
dec ebx
jnz @f
call get_clock_ns
mov [esp + SYSCALL_STACK.edx], edx
mov [esp + SYSCALL_STACK.eax], eax
ret
;--------------------------------------
@@:
; F.26.11 - Find out whether low-level HD access is enabled
dec ebx
jnz @f
mov eax, [lba_read_enabled]
mov [esp + SYSCALL_STACK.eax], eax
ret
;--------------------------------------
@@:
; F.26.12 - Find out whether low-level PCI access is enabled
dec ebx
jnz .error
mov eax, [pci_access_enabled]
mov [esp + SYSCALL_STACK.eax], eax
ret
;--------------------------------------
.error:
or [esp + SYSCALL_STACK.eax], dword -1
ret
;-----------------------------------------------------------------------------
get_timer_ticks:
mov eax, [timer_ticks]
ret
;-----------------------------------------------------------------------------
iglobal
midi_base dw 0
endg
align 4
sys_midi:
cmp word [mididp], 0
jnz @f
mov [esp + SYSCALL_STACK.eax], 1
ret
@@:
and [esp + SYSCALL_STACK.eax], 0
dec ebx
jnz .smn1
; call setuart
@@:
call .is_output
test al, al
jnz @b
mov dx, word [midisp]
mov al, 0xff
out dx, al
@@:
mov dx, word [midisp]
mov al, 0xff
out dx, al
call .is_input
test al, al
jnz @b
call .get_mpu_in
cmp al, 0xfe
jnz @b
@@:
call .is_output
test al, al
jnz @b
mov dx, word [midisp]
mov al, 0x3f
out dx, al
ret
.smn1:
dec ebx
jnz .ret
@@:
call .get_mpu_in
call .is_output
test al, al
jnz @b
mov al, bl
call .put_mpu_out
.ret:
ret
.is_input:
push edx
mov dx, word [midisp]
in al, dx
and al, 0x80
pop edx
ret
.is_output:
push edx
mov dx, word [midisp]
in al, dx
and al, 0x40
pop edx
ret
.get_mpu_in:
push edx
mov dx, word [mididp]
in al, dx
pop edx
ret
.put_mpu_out:
push edx
mov dx, word [mididp]
out dx, al
pop edx
ret
;-----------------------------------------------------------------------------
sys_end:
; restore default cursor before killing
pusha
mov ecx, [current_slot]
mov ecx, [ecx + APPDATA.window]
call restore_default_cursor_before_killing
popa
;--------------------------------------
; kill all sockets this process owns
pusha
mov edx, [current_slot]
mov edx, [edx + APPDATA.tid]
call socket_process_end
popa
;--------------------------------------
mov ecx, [current_slot]
mov eax, [ecx + APPDATA.tls_base]
test eax, eax
jz @F
stdcall user_free, eax
@@:
mov eax, [current_slot]
mov [eax + APPDATA.state], TSTATE_ZOMBIE
call wakeup_osloop
.waitterm: ; wait here for termination
call change_task
jmp .waitterm
;------------------------------------------------------------------------------
align 4
; ecx - ptr WDATA
restore_default_cursor_before_killing:
pushfd
cli
mov eax, [def_cursor]
mov [ecx + WDATA.cursor], eax
movzx eax, word [MOUSE_Y]
movzx ebx, word [MOUSE_X]
mov eax, [d_width_calc_area + eax*4]
add eax, [_display.win_map]
movzx edx, byte [ebx + eax]
shl edx, BSF sizeof.WDATA
mov esi, [window_data + edx + WDATA.cursor]
cmp esi, [current_cursor]
je @f
cmp [_display.select_cursor], 0
jz @f
stdcall [_display.select_cursor], esi
mov [current_cursor], esi
@@:
mov [redrawmouse_unconditional], 1
call wakeup_osloop
popfd
ret
;------------------------------------------------------------------------------
iglobal
align 4
sys_system_table:
dd sysfn_deactivate ; 1 = deactivate window
dd sysfn_terminate ; 2 = terminate thread
dd sysfn_activate ; 3 = activate window
dd sysfn_getidletime ; 4 = get idle time
dd sysfn_getcpuclock ; 5 = get cpu clock
dd sysfn_saveramdisk ; 6 = save ramdisk
dd sysfn_getactive ; 7 = get active window
dd sysfn_sound_flag ; 8 = get/set sound_flag
dd sysfn_shutdown ; 9 = shutdown with parameter
dd sysfn_minimize ; 10 = minimize window
dd sysfn_getdiskinfo ; 11 = get disk subsystem info
dd undefined_syscall ; 12 = get last pressed key. function removed. sysfn_lastkey
dd sysfn_getversion ; 13 = get kernel version
dd sysfn_waitretrace ; 14 = wait retrace
dd sysfn_centermouse ; 15 = center mouse cursor
dd sysfn_getfreemem ; 16 = get free memory size
dd sysfn_getallmem ; 17 = get total memory size
dd sysfn_terminate2 ; 18 = terminate thread using PID
; instead of slot
dd sysfn_mouse_acceleration; 19 = set/get mouse acceleration
dd sysfn_meminfo ; 20 = get extended memory info
dd sysfn_pid_to_slot ; 21 = get slot number for pid
dd sysfn_min_rest_window ; 22 = minimize and restore any window
dd sysfn_min_windows ; 23 = minimize all windows
dd sysfn_set_screen_sizes ; 24 = set screen sizes for Vesa
dd sysfn_zmodif ; 25 = get/set window z modifier ;Fantomer
sysfn_num = ($ - sys_system_table)/4
endg
;------------------------------------------------------------------------------
sys_system:
dec ebx
cmp ebx, sysfn_num
jae @f
jmp dword [sys_system_table + ebx*4]
@@:
ret
;------------------------------------------------------------------------------
sysfn_shutdown: ; 18.9 = system shutdown
cmp ecx, SYSTEM_SHUTDOWN
jl .exit_for_anyone
cmp ecx, SYSTEM_RESTART
jg .exit_for_anyone
mov [BOOT.shutdown_type], cl
mov eax, [thread_count]
mov [SYS_SHUTDOWN], al
mov [shutdown_processes], eax
call wakeup_osloop
and dword [esp + SYSCALL_STACK.eax], 0
.exit_for_anyone:
ret
uglobal
shutdown_processes:
dd 0x0
endg
;------------------------------------------------------------------------------
; in: eax -- APPDATA ptr
; out: Z/z -- is/not kernel thread
is_kernel_thread:
mov eax, [eax + APPDATA.process]
cmp eax, [SLOT_BASE + 2*sizeof.APPDATA + APPDATA.process] ; OS
ret
;------------------------------------------------------------------------------
sysfn_terminate: ; 18.2 = TERMINATE
push ecx
cmp ecx, 2
jb .noprocessterminate
mov edx, [thread_count]
cmp ecx, edx
ja .noprocessterminate
mov eax, [thread_count]
shl ecx, BSF sizeof.APPDATA
add ecx, SLOT_BASE
mov edx, [ecx + APPDATA.tid]
cmp byte [ecx + APPDATA.state], TSTATE_FREE
jz .noprocessterminate
push eax
mov eax, ecx
call is_kernel_thread
pop eax
jz .noprocessterminate
push ecx edx
mov edx, ecx
call request_terminate
pop edx ecx
test eax, eax
jz .noprocessterminate
;--------------------------------------
; terminate all network sockets it used
pusha
mov eax, edx ;TODO: check function
call socket_process_end
popa
;--------------------------------------
; restore default cursor before killing
pusha
mov ecx, [esp+32]
shl ecx, BSF sizeof.WDATA
add ecx, window_data
mov eax, [def_cursor]
cmp [ecx + WDATA.cursor], eax
je @f
call restore_default_cursor_before_killing
@@:
popa
;--------------------------------------
;call MEM_Heap_Lock ;guarantee that process isn't working with heap
mov [ecx + APPDATA.state], TSTATE_ZOMBIE; clear possible i40's
call wakeup_osloop
;call MEM_Heap_UnLock
cmp edx, [application_table_owner]; clear app table stat
jne .noatsc
call unlock_application_table
.noatsc:
.noprocessterminate:
add esp, 4
ret
;------------------------------------------------------------------------------
sysfn_terminate2:
call lock_application_table
mov eax, ecx
call pid_to_slot
test eax, eax
jz .not_found
mov ecx, eax
cli
call sysfn_terminate
call unlock_application_table
sti
and dword [esp + SYSCALL_STACK.eax], 0
ret
.not_found:
call unlock_application_table
or dword [esp + SYSCALL_STACK.eax], -1
ret
;------------------------------------------------------------------------------
sysfn_deactivate: ; 18.1 = DEACTIVATE WINDOW
cmp ecx, 2
jb .nowindowdeactivate
cmp ecx, [thread_count]
ja .nowindowdeactivate
movzx esi, word [WIN_STACK + ecx*2]
cmp esi, 1
je .nowindowdeactivate ; already deactive
mov edi, ecx
shl edi, BSF sizeof.WDATA
add edi, window_data
movzx esi, word [WIN_STACK + ecx * 2]
lea esi, [WIN_POS + esi * 2]
call window._.window_deactivate
call syscall_display_settings.calculateScreen
call syscall_display_settings.redrawScreen
.nowindowdeactivate:
ret
;------------------------------------------------------------------------------
sysfn_activate: ; 18.3 = ACTIVATE WINDOW
cmp ecx, 2
jb .nowindowactivate
cmp ecx, [thread_count]
ja .nowindowactivate
;-------------------------------------
@@:
; If the window is captured and moved by the user,
; then you can't change the position in window stack!!!
mov al, [mouse.active_sys_window.action]
and al, WINDOW_MOVE_AND_RESIZE_FLAGS
test al, al
jz @f
call change_task
jmp @b
@@:
;-------------------------------------
mov [window_minimize], 2; restore window if minimized
call wakeup_osloop
movzx esi, word [WIN_STACK + ecx*2]
cmp esi, [thread_count]
je .nowindowactivate; already active
mov edi, ecx
shl edi, BSF sizeof.WDATA
add edi, window_data
movzx esi, word [WIN_STACK + ecx * 2]
lea esi, [WIN_POS + esi * 2]
call waredraw
.nowindowactivate:
ret
;------------------------------------------------------------------------------
align 4
sysfn_zmodif:
;18,25,1 - get z_modif
;18,25,2 - set z_modif
;edx = -1(for current task) or TID
;esi(for 2) = new value z_modif
;return:
;1: eax = z_modif
;2: eax=0(fail),1(success) for set z_modif
cmp edx, -1
jne @f
mov edx, [current_slot_idx]
@@:
cmp edx, [thread_count]
ja .fail
cmp edx, 1
je .fail
mov eax, edx
shl edx, BSF sizeof.WDATA
add edx, window_data
test [edx + WDATA.fl_wstate], WSTATE_USED
jz .fail
cmp ecx, 1
jnz .set_zmod
movzx eax, [edx + WDATA.z_modif]
jmp .exit
.set_zmod:
cmp ecx, 2
jnz .fail
mov ebx, esi
mov esi, eax
cmp bl, ZPOS_ALWAYS_TOP
jg .fail
mov [edx + WDATA.z_modif], bl
mov eax, [edx + WDATA.box.left]
mov ebx, [edx + WDATA.box.top]
mov ecx, [edx + WDATA.box.width]
mov edx, [edx + WDATA.box.height]
add ecx, eax
add edx, ebx
call window._.set_screen
call window._.set_top_wnd
call window._.redraw_top_wnd
shl esi, BSF sizeof.WDATA
mov [esi + window_data + WDATA.fl_redraw], WSTATE_REDRAW
mov eax, 1
jmp .exit
.fail:
xor eax, eax
.exit:
mov [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
sysfn_getidletime: ; 18.4 = GET IDLETIME
mov eax, [SLOT_BASE + sizeof.APPDATA + APPDATA.cpu_usage]
mov [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
sysfn_getcpuclock: ; 18.5 = GET TSC/SEC
mov eax, dword [cpu_freq]
mov [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
get_cpu_freq:
mov eax, dword [cpu_freq]
mov edx, dword [cpu_freq+4]
ret
; SAVE ramdisk to /hd/1/kolibri.img
;!!!!!!!!!!!!!!!!!!!!!!!!
include 'blkdev/rdsave.inc'
;!!!!!!!!!!!!!!!!!!!!!!!!
;------------------------------------------------------------------------------
align 4
sysfn_getactive: ; 18.7 = get active window
mov eax, [thread_count]
movzx eax, word [WIN_POS + eax*2]
mov [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
sysfn_sound_flag: ; 18.8 = get/set sound_flag
; cmp ecx,1
dec ecx
jnz .set_flag
movzx eax, byte [sound_flag]; get sound_flag
mov [esp + SYSCALL_STACK.eax], eax
ret
.set_flag:
; cmp ecx,2
dec ecx
jnz .err
xor byte [sound_flag], 1
.err:
ret
;------------------------------------------------------------------------------
sysfn_minimize: ; 18.10 = minimize window
mov [window_minimize], 1
call wakeup_osloop
ret
;------------------------------------------------------------------------------
align 4
sysfn_getdiskinfo: ; 18.11 = get disk info table
dec ecx
jnz .exit
.small_table:
stdcall is_region_userspace, edx, DRIVE_DATA_SIZE
jnz .exit
mov edi, edx
mov esi, DRIVE_DATA
mov ecx, DRIVE_DATA_SIZE ;10
cld
rep movsb
.exit:
ret
;------------------------------------------------------------------------------
sysfn_getversion: ; 18.13 = get kernel ID and version
; if given memory address belongs to kernel then error
stdcall is_region_userspace, ecx, version_inf.size
jnz .addr_error
mov edi, ecx
mov esi, version_inf
mov ecx, version_inf.size
rep movsb
ret
.addr_error: ; if given memory address is illegal
mov dword [esp + SYSCALL_STACK.eax], -1
ret
;------------------------------------------------------------------------------
sysfn_waitretrace: ; 18.14 = sys wait retrace
;wait retrace functions
mov edx, 0x3da
.loop:
in al, dx
test al, 1000b
jz .loop
and [esp + SYSCALL_STACK.eax], dword 0
ret
;------------------------------------------------------------------------------
align 4
sysfn_centermouse: ; 18.15 = mouse centered
mov eax, [_display.width]
shr eax, 1
mov [MOUSE_X], ax
mov eax, [_display.height]
shr eax, 1
mov [MOUSE_Y], ax
call wakeup_osloop
xor eax, eax
and [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
sysfn_mouse_acceleration: ; 18.19 = set/get mouse features
cmp ecx, 8
jnc @f
jmp dword [.table + ecx*4]
.get_mouse_acceleration:
xor eax, eax
mov ax, [mouse_speed_factor]
mov [esp + SYSCALL_STACK.eax], eax
ret
.set_mouse_acceleration:
mov [mouse_speed_factor], dx
ret
.get_mouse_delay:
xor eax, eax
mov al, [mouse_delay]
mov [esp + SYSCALL_STACK.eax], eax
ret
.set_mouse_delay:
mov [mouse_delay], dl
@@:
ret
.set_pointer_position:
cmp dx, word[_display.height]
jae @b
rol edx, 16
cmp dx, word[_display.width]
jae @b
mov [MOUSE_X], edx
mov [mouse_active], 1
jmp wakeup_osloop
.set_mouse_button:
mov [BTN_DOWN], edx
mov [mouse_active], 1
jmp wakeup_osloop
.get_doubleclick_delay:
xor eax, eax
mov al, [mouse_doubleclick_delay]
mov [esp + SYSCALL_STACK.eax], eax
ret
.set_doubleclick_delay:
mov [mouse_doubleclick_delay], dl
ret
align 4
.table:
dd .get_mouse_acceleration
dd .set_mouse_acceleration
dd .get_mouse_delay
dd .set_mouse_delay
dd .set_pointer_position
dd .set_mouse_button
dd .get_doubleclick_delay
dd .set_doubleclick_delay
;------------------------------------------------------------------------------
sysfn_getfreemem:
mov eax, [pg_data.pages_free]
shl eax, 2
mov [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
sysfn_getallmem:
mov eax, [MEM_AMOUNT]
shr eax, 10
mov [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
sysfn_pid_to_slot:
mov eax, ecx
call pid_to_slot
mov [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
sysfn_min_rest_window:
pushad
mov eax, edx ; ebx - operating
shr ecx, 1
jnc @f
call pid_to_slot
@@:
or eax, eax ; eax - number of slot
jz .error
cmp eax, max_processes ; varify maximal slot number
ja .error
movzx eax, word [WIN_STACK + eax*2]
shr ecx, 1
jc .restore
; .minimize:
call minimize_window
jmp .exit
.restore:
call restore_minimized_window
.exit:
popad
xor eax, eax
mov [esp + SYSCALL_STACK.eax], eax
ret
.error:
popad
xor eax, eax
dec eax
mov [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
sysfn_min_windows:
call minimize_all_window
mov [esp + SYSCALL_STACK.eax], eax
call change_task
ret
;------------------------------------------------------------------------------
sysfn_set_screen_sizes:
cmp [SCR_MODE], word 0x13
jbe .exit
cmp [_display.select_cursor], select_cursor
jne .exit
cmp ecx, [display_width_standard]
ja .exit
cmp edx, [display_height_standard]
ja .exit
pushfd
cli
mov eax, ecx
mov ecx, [_display.lfb_pitch]
mov [_display.width], eax
dec eax
mov [_display.height], edx
dec edx
; eax - new Screen_Max_X
; edx - new Screen_Max_Y
mov [do_not_touch_winmap], 1
call set_screen
mov [do_not_touch_winmap], 0
popfd
call change_task
.exit:
ret
;------------------------------------------------------------------------------
uglobal
screen_workarea RECT
display_width_standard dd 0
display_height_standard dd 0
do_not_touch_winmap db 0
window_minimize db 0
sound_flag db 0
endg
iglobal
version_inf:
db 0,7,7,0 ; version 0.7.7.0
db 0
.rev dd __REV__
.size = $ - version_inf
endg
;------------------------------------------------------------------------------
align 4
sys_cachetodiskette:
cmp ebx, 1
jb .no_floppy_save
cmp ebx, 2
ja .no_floppy_save
call save_image
mov [esp + SYSCALL_STACK.eax], eax
ret
.no_floppy_save:
mov [esp + SYSCALL_STACK.eax], dword 1
ret
;------------------------------------------------------------------------------
align 4
sys_cpuusage:
; RETURN: process_information structure
;
; if given memory address belongs to kernel then error
stdcall is_region_userspace, ebx, sizeof.process_information
jnz .addr_error
cmp ecx, -1 ; who am I ?
jne .no_who_am_i
mov ecx, [current_slot_idx]
.no_who_am_i:
cmp ecx, max_processes
ja .nofillbuf
test ecx, ecx ; slot 0 is empty, kernel threads start from 1
jz .nofillbuf
; +4: word: position of the window of thread in the window stack
mov ax, [WIN_STACK + ecx * 2]
mov [ebx+process_information.window_stack_position], ax
; +6: word: number of the thread slot, which window has in the window stack
; position ecx (has no relation to the specific thread)
mov ax, [WIN_POS + ecx * 2]
mov [ebx+process_information.window_stack_value], ax
shl ecx, BSF sizeof.APPDATA
; +0: dword: memory usage
mov eax, [SLOT_BASE + ecx + APPDATA.cpu_usage]
mov [ebx+process_information.cpu_usage], eax
; +10: 11 bytes: name of the process
push ecx
lea eax, [SLOT_BASE + ecx + APPDATA.app_name]
add ebx, process_information.process_name
mov ecx, 11
call memmove
pop ecx
; +22: address of the process in memory
; +26: size of used memory - 1
push edi
lea edi, [ebx+12]
xor eax, eax
mov edx, 0x100000*16
cmp ecx, 1 shl BSF sizeof.APPDATA
je .os_mem
mov edx, [SLOT_BASE + ecx + APPDATA.process]
mov edx, [edx + PROC.mem_used]
mov eax, std_application_base_address
.os_mem:
stosd
lea eax, [edx-1]
stosd
mov edx, [SLOT_BASE + ecx + APPDATA.window]
; +30: PID/TID
mov eax, [SLOT_BASE + ecx + APPDATA.tid]
stosd
; window position and size
push esi
lea esi, [edx + WDATA.box]
movsd
movsd
movsd
movsd
; Process state (+50)
movzx eax, byte [SLOT_BASE + ecx + APPDATA.state]
stosd
; Window client area box
lea esi, [edx + WDATA.clientbox]
movsd
movsd
movsd
movsd
; Window state
mov al, [edx + WDATA.fl_wstate]
stosb
; Event mask (+71)
mov eax, dword [SLOT_BASE + ecx + APPDATA.event_mask]
stosd
; Keyboard mode (+75)
mov al, byte [SLOT_BASE + ecx + APPDATA.keyboard_mode]
stosb
pop esi
pop edi
.nofillbuf:
; return number of processes
mov eax, [thread_count]
mov [esp + SYSCALL_STACK.eax], eax
ret
.addr_error: ; if given memory address is illegal
mov dword [esp + SYSCALL_STACK.eax], -1
ret
; redraw status
align 4
sys_redrawstat:
cmp ebx, 1
jne .no_widgets_away
; buttons away
mov ecx, [current_slot_idx]
.sys_newba2:
mov edi, [BTN_ADDR]
cmp [edi], dword 0 ; empty button list ?
je .end_of_buttons_away
movzx ebx, word [edi]
inc ebx
mov eax, edi
.sys_newba:
dec ebx
jz .end_of_buttons_away
add eax, 0x10
cmp cx, [eax]
jnz .sys_newba
push eax ebx ecx
mov ecx, ebx
inc ecx
shl ecx, 4
mov ebx, eax
add eax, 0x10
call memmove
dec dword [edi]
pop ecx ebx eax
jmp .sys_newba2
.end_of_buttons_away:
ret
.no_widgets_away:
cmp ebx, 2
jnz .srl1
mov edx, [current_slot] ; return whole screen draw area for this app
mov edx, [edx + APPDATA.window]
mov [edx + WDATA.draw_data.left], 0
mov [edx + WDATA.draw_data.top], 0
mov eax, [_display.width]
dec eax
mov [edx + WDATA.draw_data.right], eax
mov eax, [_display.height]
dec eax
mov [edx + WDATA.draw_data.bottom], eax
.srl1:
ret
;ok - 100% work
;nt - not tested
;---------------------------------------------------------------------------------------------
;eax
;0 - task switch counter. Ret switch counter in eax. Block. ok.
;1 - change task. Ret nothing. Block. ok.
;2 - performance control
; ebx
; 0 - enable or disable (inversion) PCE flag on CR4 for rdmpc in user mode.
; returned new cr4 in eax. Ret cr4 in eax. Block. ok.
; 1 - is cache enabled. Ret cr0 in eax if enabled else zero in eax. Block. ok.
; 2 - enable cache. Ret 1 in eax. Ret nothing. Block. ok.
; 3 - disable cache. Ret 0 in eax. Ret nothing. Block. ok.
;eax
;3 - rdmsr. Counter in edx. (edx:eax) [esi:edi, edx] => [edx:esi, ecx]. Ret in ebx:eax. Block. ok.
;4 - wrmsr. Counter in edx. (edx:eax) [esi:edi, edx] => [edx:esi, ecx]. Ret in ebx:eax. Block. ok.
;---------------------------------------------------------------------------------------------
iglobal
align 4
sheduler:
dd sys_sheduler.00
dd change_task
dd sys_sheduler.02
dd sys_sheduler.03
dd sys_sheduler.04
endg
sys_sheduler:
;rewritten by <Lrz> 29.12.2009
jmp dword [sheduler + ebx*4]
;.shed_counter:
.00:
mov eax, [context_counter]
mov [esp + SYSCALL_STACK.eax], eax
ret
.02:
;.perf_control:
inc ebx ;before ebx=2, ebx=3
cmp ebx, ecx ;if ecx=3, ebx=3
jz cache_disable
dec ebx ;ebx=2
cmp ebx, ecx ;
jz cache_enable ;if ecx=2 and ebx=2
dec ebx ;ebx=1
cmp ebx, ecx
jz is_cache_enabled ;if ecx=1 and ebx=1
dec ebx
test ebx, ecx ;ebx=0 and ecx=0
jz modify_pce ;if ecx=0
ret
.03:
;.rdmsr_instr:
;now counter in ecx
;(edx:eax) esi:edi => edx:esi
mov eax, esi
mov ecx, edx
rdmsr
mov [esp + SYSCALL_STACK.eax], eax
mov [esp + SYSCALL_STACK.ebx], edx ;ret in ebx?
ret
.04:
;.wrmsr_instr:
;now counter in ecx
;(edx:eax) esi:edi => edx:esi
; Fast Call MSR can't be destroy
; Но MSR_AMD_EFER можно изменять, т.к. в этом регистре лиш
; включаются/выключаются расширенные возможности
cmp edx, MSR_SYSENTER_CS
je @f
cmp edx, MSR_SYSENTER_ESP
je @f
cmp edx, MSR_SYSENTER_EIP
je @f
cmp edx, MSR_AMD_STAR
je @f
mov eax, esi
mov ecx, edx
wrmsr
; mov [esp + 32], eax
; mov [esp + 20], edx ;ret in ebx?
@@:
ret
cache_disable:
mov eax, cr0
or eax, 01100000_00000000_00000000_00000000b
mov cr0, eax
wbinvd ;set MESI
ret
cache_enable:
mov eax, cr0
and eax, 10011111_11111111_11111111_11111111b
mov cr0, eax
ret
is_cache_enabled:
mov eax, cr0
and eax, 01100000_00000000_00000000_00000000b
mov [esp + SYSCALL_STACK.eax], eax
ret
modify_pce:
mov eax, cr4
; mov ebx,0
; or bx,100000000b ;pce
; xor eax,ebx ;invert pce
bts eax, 8;pce=cr4[8]
mov cr4, eax
mov [esp + SYSCALL_STACK.eax], eax
ret
;---------------------------------------------------------------------------------------------
iglobal
cpustring db 'CPU',0
endg
uglobal
background_defined db 0 ; diamond, 11.04.2006
endg
;-----------------------------------------------------------------------------
align 4
checkmisc:
cmp [ctrl_alt_del], 1
jne .nocpustart
mov ebp, cpustring
call fs_execute_from_sysdir
mov [ctrl_alt_del], 0
;--------------------------------------
align 4
.nocpustart:
cmp [mouse_active], 1
jne .mouse_not_active
mov [mouse_active], 0
xor edi, edi
mov ebx, window_data
mov ecx, [thread_count]
movzx eax, word [WIN_POS + ecx*2] ; active window
shl eax, BSF sizeof.APPDATA
push eax
movzx eax, word [MOUSE_X]
movzx edx, word [MOUSE_Y]
;--------------------------------------
align 4
.set_mouse_event:
add edi, sizeof.APPDATA
add ebx, sizeof.WDATA
test [SLOT_BASE + edi + APPDATA.event_mask], EVM_MOUSE_FILTER
jz .pos_filter
cmp edi, [esp] ; skip if filtration active
jne .skip
;--------------------------------------
align 4
.pos_filter:
test [SLOT_BASE + edi + APPDATA.event_mask], EVM_CURSOR_FILTER
jz .set
mov esi, [ebx + WDATA.box.left]
cmp eax, esi
jb .skip
add esi, [ebx + WDATA.box.width]
cmp eax, esi
ja .skip
mov esi, [ebx + WDATA.box.top]
cmp edx, esi
jb .skip
add esi, [ebx + WDATA.box.height]
cmp edx, esi
ja .skip
;--------------------------------------
align 4
.set:
or [SLOT_BASE + edi + APPDATA.occurred_events], EVENT_MOUSE
;--------------------------------------
align 4
.skip:
loop .set_mouse_event
pop eax
;--------------------------------------
align 4
.mouse_not_active:
cmp [REDRAW_BACKGROUND], 0 ; background update ?
jz nobackgr
cmp [background_defined], 0
jz nobackgr
;--------------------------------------
align 4
backgr:
mov eax, [background_window + WDATA.draw_data.left]
shl eax, 16
add eax, [background_window + WDATA.draw_data.right]
mov [BG_Rect_X_left_right], eax ; [left]*65536 + [right]
mov eax, [background_window + WDATA.draw_data.top]
shl eax, 16
add eax, [background_window + WDATA.draw_data.bottom]
mov [BG_Rect_Y_top_bottom], eax ; [top]*65536 + [bottom]
call drawbackground
; DEBUGF 1, "K : drawbackground\n"
; DEBUGF 1, "K : backg x %x\n",[BG_Rect_X_left_right]
; DEBUGF 1, "K : backg y %x\n",[BG_Rect_Y_top_bottom]
;--------- set event 5 start ----------
push ecx edi
mov edi, window_data
mov ecx, [thread_count]
;--------------------------------------
align 4
set_bgr_event:
add edi, sizeof.WDATA
mov eax, [BG_Rect_X_left_right]
mov edx, [BG_Rect_Y_top_bottom]
cmp [edi + WDATA.draw_bgr_x], 0
jz .set
.join:
cmp word [edi + WDATA.draw_bgr_x], ax
jae @f
mov word [edi + WDATA.draw_bgr_x], ax
@@:
shr eax, 16
cmp word [edi + WDATA.draw_bgr_x + 2], ax
jbe @f
mov word [edi + WDATA.draw_bgr_x + 2], ax
@@:
cmp word [edi + WDATA.draw_bgr_y], dx
jae @f
mov word [edi + WDATA.draw_bgr_y], dx
@@:
shr edx, 16
cmp word [edi + WDATA.draw_bgr_y+2], dx
jbe @f
mov word [edi + WDATA.draw_bgr_y+2], dx
@@:
jmp .common
.set:
mov [edi + WDATA.draw_bgr_x], eax
mov [edi + WDATA.draw_bgr_y], edx
.common:
mov eax, [edi + WDATA.thread]
test eax, eax
jz @f
or [eax + APPDATA.occurred_events], EVENT_BACKGROUND
@@:
loop set_bgr_event
pop edi ecx
;--------- set event 5 stop -----------
dec [REDRAW_BACKGROUND] ; got new update request?
jnz backgr
xor eax, eax
mov [background_window + WDATA.draw_data.left], eax
mov [background_window + WDATA.draw_data.top], eax
mov [background_window + WDATA.draw_data.right], eax
mov [background_window + WDATA.draw_data.bottom], eax
;--------------------------------------
align 4
nobackgr:
; system shutdown request
cmp [SYS_SHUTDOWN], byte 0
je noshutdown
mov edx, [shutdown_processes]
cmp [SYS_SHUTDOWN], dl
jne noshutdown
lea ecx, [edx-1]
mov edx, SLOT_BASE + sizeof.APPDATA*2 ;OS_BASE+0x3040
jecxz no_mark_system_shutdown
;--------------------------------------
align 4
markz:
push ecx edx
cmp [edx + APPDATA.state], TSTATE_FREE
jz .nokill
cmp [edx + APPDATA.process], sys_proc
jz .nokill
call request_terminate
jmp .common
.nokill:
dec byte [SYS_SHUTDOWN]
xor eax, eax
.common:
pop edx ecx
test eax, eax
jz @f
mov [edx + APPDATA.state], TSTATE_ZOMBIE
@@:
add edx, sizeof.APPDATA
loop markz
call wakeup_osloop
;--------------------------------------
align 4
@@:
no_mark_system_shutdown:
dec byte [SYS_SHUTDOWN]
je system_shutdown
;--------------------------------------
align 4
noshutdown:
mov eax, [thread_count] ; termination
mov ebx, SLOT_BASE + sizeof.APPDATA + APPDATA.state
mov esi, 1
;--------------------------------------
align 4
newct:
mov cl, [ebx]
cmp cl, TSTATE_ZOMBIE
jz .terminate
cmp cl, TSTATE_TERMINATING
jnz .noterminate
.terminate:
pushad
push esi
mov ecx, dword[ebx - APPDATA.state + APPDATA.window]
call restore_default_cursor_before_killing
pop esi
call terminate
popad
cmp byte [SYS_SHUTDOWN], 0
jz .noterminate
dec byte [SYS_SHUTDOWN]
je system_shutdown
.noterminate:
add ebx, sizeof.APPDATA
inc esi
dec eax
jnz newct
ret
;-----------------------------------------------------------------------------
align 4
; eax - ptr to WDATA
redrawscreen:
; eax , if process window_data base is eax, do not set flag/limits
pushad
push eax
;;; mov ebx,2
;;; call delay_hs
;mov ecx,0 ; redraw flags for apps
xor ecx, ecx
;--------------------------------------
align 4
newdw2:
inc ecx
push ecx
mov eax, ecx
shl eax, BSF sizeof.WDATA
add eax, window_data
cmp eax, [esp+4]
je not_this_task
; check if window in redraw area
mov edi, eax
cmp ecx, 1 ; limit for background
jz bgli
mov eax, [esp+4] ;if upper in z-position - no redraw
test eax, eax
jz @f
mov al, [eax + WDATA.z_modif]
cmp [edi + WDATA.z_modif], al
jg ricino
@@:
mov eax, [edi + WDATA.box.left]
mov ebx, [edi + WDATA.box.top]
cmp ebx, [draw_limits.bottom] ; ecx = area y end ebx = window y start
jae ricino
cmp eax, [draw_limits.right] ; ecx = area x end eax = window x start
jae ricino
mov eax, [edi + WDATA.box.left]
mov ebx, [edi + WDATA.box.top]
mov ecx, [edi + WDATA.box.width]
mov edx, [edi + WDATA.box.height]
add ecx, eax
add edx, ebx
mov eax, [draw_limits.top] ; eax = area y start edx = window y end
cmp edx, eax
jb ricino
mov eax, [draw_limits.left] ; eax = area x start ecx = window x end
cmp ecx, eax
jb ricino
;--------------------------------------
align 4
bgli:
cmp dword[esp], 1 ; check index in window_data array, 1 - idle
jnz .az
cmp [REDRAW_BACKGROUND], 0
jz .az
mov dl, 0
mov ebx, [draw_limits.left]
cmp ebx, [edi + WDATA.draw_data.left]
jae @f
mov [edi + WDATA.draw_data.left], ebx
mov dl, 1
;--------------------------------------
align 4
@@:
mov ebx, [draw_limits.top]
cmp ebx, [edi + WDATA.draw_data.top]
jae @f
mov [edi + WDATA.draw_data.top], ebx
mov dl, 1
;--------------------------------------
align 4
@@:
mov ebx, [draw_limits.right]
cmp ebx, [edi + WDATA.draw_data.right]
jbe @f
mov [edi + WDATA.draw_data.right], ebx
mov dl, 1
;--------------------------------------
align 4
@@:
mov ebx, [draw_limits.bottom]
cmp ebx, [edi + WDATA.draw_data.bottom]
jbe @f
mov [edi + WDATA.draw_data.bottom], ebx
mov dl, 1
;--------------------------------------
align 4
@@:
add [REDRAW_BACKGROUND], dl
call wakeup_osloop
jmp newdw8
;--------------------------------------
align 4
.az:
mov ebx, [draw_limits.left] ; set limits
mov [edi + WDATA.draw_data.left], ebx
mov ebx, [draw_limits.top]
mov [edi + WDATA.draw_data.top], ebx
mov ebx, [draw_limits.right]
mov [edi + WDATA.draw_data.right], ebx
mov ebx, [draw_limits.bottom]
mov [edi + WDATA.draw_data.bottom], ebx
cmp dword [esp], 1 ; check idle thread
jne nobgrd
inc [REDRAW_BACKGROUND]
call wakeup_osloop
;--------------------------------------
align 4
newdw8:
nobgrd:
;--------------------------------------
push edi ebp
mov edi, [esp+8]
cmp edi, 1
je .found
mov eax, [draw_limits.left]
mov ebx, [draw_limits.top]
mov ecx, [draw_limits.right]
sub ecx, eax
test ecx, ecx
jz .not_found
mov edx, [draw_limits.bottom]
sub edx, ebx
test edx, edx
jz .not_found
; eax - x, ebx - y
; ecx - size x, edx - size y
add ebx, edx
;--------------------------------------
align 4
.start_y:
push ecx
;--------------------------------------
align 4
.start_x:
add eax, ecx
mov ebp, [d_width_calc_area + ebx*4]
add ebp, [_display.win_map]
movzx ebp, byte[eax+ebp] ; get value for current point
cmp ebp, edi
jne @f
pop ecx
jmp .found
;--------------------------------------
align 4
@@:
sub eax, ecx
dec ecx
jns .start_x
pop ecx
dec ebx
dec edx
jns .start_y
;--------------------------------------
align 4
.not_found:
pop ebp edi
jmp ricino
;--------------------------------------
align 4
.found:
pop ebp edi
mov [edi + WDATA.fl_redraw], WSTATE_REDRAW ; mark as redraw
;--------------------------------------
align 4
ricino:
not_this_task:
pop ecx
cmp ecx, [thread_count]
jle newdw2
pop eax
popad
ret
;-----------------------------------------------------------------------------
align 4
calculatebackground: ; background
mov edi, [_display.win_map] ; set os to use all pixels
mov eax, 0x01010101
mov ecx, [_display.win_map_size]
shr ecx, 2
rep stosd
mov byte[background_window + WDATA.z_modif], ZPOS_DESKTOP
mov [REDRAW_BACKGROUND], 0
ret
;-----------------------------------------------------------------------------
uglobal
imax dd 0x0
endg
;-----------------------------------------------------------------------------
align 4
delay_ms: ; delay in 1/1000 sec
pushad
cmp [hpet_base], 0
jz .no_hpet
mov eax, esi
mov edx, 1_000_000 ; ms to ns
mul edx
mov ebx, edx
mov ecx, eax
push ecx
call get_clock_ns
pop ecx
mov edi, edx
mov esi, eax
.wait:
push ecx
call get_clock_ns
pop ecx
sub eax, esi
sbb edx, edi
sub eax, ecx
sbb edx, ebx
jc .wait
jmp .done
.no_hpet:
mov ecx, esi
; <CPU clock fix by Sergey Kuzmin aka Wildwest>
imul ecx, 33941
shr ecx, 9
; </CPU clock fix>
in al, 0x61
and al, 0x10
mov ah, al
cld
.cnt1:
in al, 0x61
and al, 0x10
cmp al, ah
jz .cnt1
mov ah, al
loop .cnt1
.done:
popad
ret
;-----------------------------------------------------------------------------
align 4
set_app_param:
mov edi, [current_slot]
xchg ebx, [edi + APPDATA.event_mask] ; set new event mask
mov [esp + SYSCALL_STACK.eax], ebx ; return old mask value
ret
;-----------------------------------------------------------------------------
; this is for syscall
proc delay_hs_unprotected
call unprotect_from_terminate
call delay_hs
call protect_from_terminate
ret
endp
if 1
align 4
delay_hs: ; delay in 1/100 secs
; ebx = delay time
pushad
push ebx
xor esi, esi
mov ecx, MANUAL_DESTROY
call create_event
test eax, eax
jz .done
mov ebx, edx
mov ecx, [esp]
push edx
push eax
call wait_event_timeout
pop eax
pop ebx
call destroy_event
.done:
add esp, 4
popad
ret
else
align 4
delay_hs: ; delay in 1/100 secs
; ebx = delay time
push ecx
push edx
mov edx, [timer_ticks]
;--------------------------------------
align 4
.newtic:
mov ecx, [timer_ticks]
sub ecx, edx
cmp ecx, ebx
jae .zerodelay
call change_task
jmp .newtic
;--------------------------------------
align 4
.zerodelay:
pop edx
pop ecx
ret
end if
;-----------------------------------------------------------------------------
align 16 ;very often call this subrutine
memmove: ; memory move in bytes
; eax = from
; ebx = to
; ecx = no of bytes
test ecx, ecx
jle .ret
push esi edi ecx
mov edi, ebx
mov esi, eax
test ecx, not 11b
jz @f
push ecx
shr ecx, 2
rep movsd
pop ecx
and ecx, 11b
jz .finish
;--------------------------------------
align 4
@@:
rep movsb
;--------------------------------------
align 4
.finish:
pop ecx edi esi
;--------------------------------------
align 4
.ret:
ret
;-----------------------------------------------------------------------------
; in: eax = port
; ebp = subfunction
; 0 - set access
; 1 - clear access
; out: not return value
align 4
set_io_access_rights:
push edi eax
mov edi, tss._io_map_0
test ebp, ebp ; enable access - ebp = 0
jnz .siar1
btr [edi], eax
pop eax edi
ret
.siar1:
bts [edi], eax ; disable access - ebp = 1
pop eax edi
ret
align 4
; @brief ReservePortArea and FreePortArea
; @param edx number end arrea of ports (include last number of port)
; @param ecx number start arrea of ports
; @param ebx sub function 0 - reserve, 1 - free
; @param eax 46 - number function
; @returns eax = 0 - succesful eax = 1 - error
syscall_reserveportarea: ; ReservePortArea and FreePortArea
call r_f_port_area
mov [esp + SYSCALL_STACK.eax], eax
ret
;reserve/free group of ports
; * eax = 46 - number function
; * ebx = 0 - reserve, 1 - free
; * ecx = number start arrea of ports
; * edx = number end arrea of ports (include last number of port)
;Return value:
; * eax = 0 - succesful
; * eax = 1 - error
; * The system has reserve this ports:
; 0..0x2d, 0x30..0x4d, 0x50..0xdf, 0xe5..0xff (include last number of port).
;destroys eax,ebx, ebp
r_f_port_area:
test ebx, ebx
jnz .free_port_area
cmp ecx, edx ; beginning > end ?
ja .err
cmp edx, 65536 ;test ebx, not 0xffff
jae .err
mov eax, [RESERVED_PORTS]
test eax, eax ; no reserved areas ?
je .rpal2
cmp eax, 255 ; max reserved
jae .err
.rpal3:
mov ebx, eax
shl ebx, 4 ;16 byte is sizeof item in RESERVED_PORTS table
add ebx, RESERVED_PORTS
cmp ecx, [ebx+8]
ja .rpal4
cmp edx, [ebx+4]
jae .err
.rpal4:
dec eax
jnz .rpal3
jmp .rpal2
.err:
xor eax, eax
inc eax
ret
.rpal2:
; enable port access at port IO map
pushad ; start enable io map
mov eax, ecx
xor ebp, ebp ; enable - eax = port
cli
.new_port_access:
call set_io_access_rights
inc eax
cmp eax, edx
jbe .new_port_access
sti
popad ; end enable io map
mov eax, [RESERVED_PORTS]
inc eax
mov [RESERVED_PORTS], eax
shl eax, 4
add eax, RESERVED_PORTS
mov ebx, [current_slot]
mov ebx, [ebx + APPDATA.tid]
mov [eax], ebx ; tid
mov [eax+4], ecx ;start port
mov [eax+8], edx ;finish port
xor eax, eax
ret
.free_port_area:
mov eax, [RESERVED_PORTS]; no reserved areas ?
test eax, eax
jz .frpal2
mov ebx, [current_slot]
mov ebx, [ebx + APPDATA.tid]
.frpal3:
mov edi, eax
shl edi, 4
add edi, RESERVED_PORTS
cmp ebx, [edi]
jne .frpal4
cmp ecx, [edi+4]
jne .frpal4
cmp edx, [edi+8]
jne .frpal4
jmp .frpal1
.frpal4:
dec eax
jnz .frpal3
.frpal2:
inc eax
ret
.frpal1:
push ecx
mov ecx, 256
sub ecx, eax
shl ecx, 4
mov esi, edi
add esi, 16
cld
rep movsb
dec dword [RESERVED_PORTS]
;disable port access at port IO map
; start disable io map
pop eax ;start port
;cmp edx, 65536
;jge no_mask_io
xor ebp, ebp
inc ebp
.new_port_access_disable: ; disable - eax = port
call set_io_access_rights
inc eax
cmp eax, edx
jbe .new_port_access_disable
; end disable io map
xor eax, eax
ret
;-----------------------------------------------------------------------------
align 4
drawbackground:
cmp [BgrDrawMode], dword 1
jne .bgrstr
call vesa20_drawbackground_tiled
call __sys_draw_pointer
ret
;--------------------------------------
align 4
.bgrstr:
call vesa20_drawbackground_stretch
call __sys_draw_pointer
ret
;-----------------------------------------------------------------------------
align 4
syscall_putimage: ; PutImage
; add check pointer
push ecx
mov ax, cx
shr ecx, 16
imul eax, ecx
lea eax, [eax*3]
stdcall is_region_userspace, ebx, eax
pop ecx
jnz sys_putimage.exit
sys_putimage:
test ecx, 0x80008000
jnz .exit
test ecx, 0x0000FFFF
jz .exit
test ecx, 0xFFFF0000
jnz @f
;--------------------------------------
align 4
.exit:
ret
;--------------------------------------
align 4
@@:
mov edi, [current_slot]
mov edi, [edi + APPDATA.window]
add dx, word[edi + WDATA.clientbox.top]
rol edx, 16
add dx, word[edi + WDATA.clientbox.left]
rol edx, 16
;--------------------------------------
align 4
.forced:
push ebp esi 0
mov ebp, putimage_get24bpp
mov esi, putimage_init24bpp
;--------------------------------------
align 4
sys_putimage_bpp:
call vesa20_putimage
pop ebp esi ebp
ret
; jmp [draw_pointer]
;-----------------------------------------------------------------------------
align 4
sys_putimage_palette:
; ebx = pointer to image
; ecx = [xsize]*65536 + [ysize]
; edx = [xstart]*65536 + [ystart]
; esi = number of bits per pixel, must be 8, 24 or 32
; edi = pointer to palette
; ebp = row delta
; check pointer
push ecx esi
mov ax, cx
shr ecx, 16
imul eax, ecx
; imul eax, esi ; eax*count bit in 1 pixel
; shr eax, 3
stdcall is_region_userspace, ebx, eax
pop esi ecx
jnz sys_putimage.exit
mov eax, [current_slot]
mov eax, [eax + APPDATA.window]
add dx, word [eax + WDATA.clientbox.top]
rol edx, 16
add dx, word [eax + WDATA.clientbox.left]
rol edx, 16
;--------------------------------------
align 4
.forced:
cmp esi, 1
jnz @f
push edi
mov eax, [edi+4]
sub eax, [edi]
push eax
push dword [edi]
push 0ffffff80h
mov edi, esp
call put_mono_image
add esp, 12
pop edi
ret
;--------------------------------------
align 4
@@:
cmp esi, 2
jnz @f
push edi
push 0ffffff80h
mov edi, esp
call put_2bit_image
pop eax
pop edi
ret
;--------------------------------------
align 4
@@:
cmp esi, 4
jnz @f
push edi
push 0ffffff80h
mov edi, esp
call put_4bit_image
pop eax
pop edi
ret
;--------------------------------------
align 4
@@:
push ebp esi ebp
cmp esi, 8
jnz @f
mov ebp, putimage_get8bpp
mov esi, putimage_init8bpp
jmp sys_putimage_bpp
;--------------------------------------
align 4
@@:
cmp esi, 9
jnz @f
mov ebp, putimage_get9bpp
mov esi, putimage_init9bpp
jmp sys_putimage_bpp
;--------------------------------------
align 4
@@:
cmp esi, 15
jnz @f
mov ebp, putimage_get15bpp
mov esi, putimage_init15bpp
jmp sys_putimage_bpp
;--------------------------------------
align 4
@@:
cmp esi, 16
jnz @f
mov ebp, putimage_get16bpp
mov esi, putimage_init16bpp
jmp sys_putimage_bpp
;--------------------------------------
align 4
@@:
cmp esi, 24
jnz @f
mov ebp, putimage_get24bpp
mov esi, putimage_init24bpp
jmp sys_putimage_bpp
;--------------------------------------
align 4
@@:
cmp esi, 32
jnz @f
mov ebp, putimage_get32bpp
mov esi, putimage_init32bpp
jmp sys_putimage_bpp
;--------------------------------------
align 4
@@:
pop ebp esi ebp
ret
;-----------------------------------------------------------------------------
align 4
put_mono_image:
push ebp esi ebp
mov ebp, putimage_get1bpp
mov esi, putimage_init1bpp
jmp sys_putimage_bpp
;-----------------------------------------------------------------------------
align 4
put_2bit_image:
push ebp esi ebp
mov ebp, putimage_get2bpp
mov esi, putimage_init2bpp
jmp sys_putimage_bpp
;-----------------------------------------------------------------------------
align 4
put_4bit_image:
push ebp esi ebp
mov ebp, putimage_get4bpp
mov esi, putimage_init4bpp
jmp sys_putimage_bpp
;-----------------------------------------------------------------------------
align 4
putimage_init24bpp:
lea eax, [eax*3]
putimage_init8bpp:
putimage_init9bpp:
ret
;-----------------------------------------------------------------------------
align 16
putimage_get24bpp:
movzx eax, byte [esi+2]
shl eax, 16
mov ax, [esi]
add esi, 3
ret 4
;-----------------------------------------------------------------------------
align 16
putimage_get8bpp:
movzx eax, byte [esi]
push edx
mov edx, [esp+8]
mov eax, [edx + eax*4]
pop edx
inc esi
ret 4
;-----------------------------------------------------------------------------
align 16
putimage_get9bpp:
lodsb
mov ah, al
shl eax, 8
mov al, ah
ret 4
;-----------------------------------------------------------------------------
align 4
putimage_init1bpp:
add eax, ecx
push ecx
add eax, 7
add ecx, 7
shr eax, 3
shr ecx, 3
sub eax, ecx
pop ecx
ret
;-----------------------------------------------------------------------------
align 16
putimage_get1bpp:
push edx
mov edx, [esp+8]
mov al, [edx]
add al, al
jnz @f
lodsb
adc al, al
@@:
mov [edx], al
sbb eax, eax
and eax, [edx+8]
add eax, [edx+4]
pop edx
ret 4
;-----------------------------------------------------------------------------
align 4
putimage_init2bpp:
add eax, ecx
push ecx
add ecx, 3
add eax, 3
shr ecx, 2
shr eax, 2
sub eax, ecx
pop ecx
ret
;-----------------------------------------------------------------------------
align 16
putimage_get2bpp:
push edx
mov edx, [esp+8]
mov al, [edx]
mov ah, al
shr al, 6
shl ah, 2
jnz .nonewbyte
lodsb
mov ah, al
shr al, 6
shl ah, 2
add ah, 1
.nonewbyte:
mov [edx], ah
mov edx, [edx+4]
movzx eax, al
mov eax, [edx + eax*4]
pop edx
ret 4
;-----------------------------------------------------------------------------
align 4
putimage_init4bpp:
add eax, ecx
push ecx
add ecx, 1
inc eax ;add eax, 1
shr ecx, 1
shr eax, 1
sub eax, ecx
pop ecx
ret
;-----------------------------------------------------------------------------
align 16
putimage_get4bpp:
push edx
mov edx, [esp+8]
add byte [edx], 80h
jc @f
movzx eax, byte [edx+1]
mov edx, [edx+4]
and eax, 0x0F
mov eax, [edx + eax*4]
pop edx
ret 4
@@:
movzx eax, byte [esi]
add esi, 1
mov [edx+1], al
shr eax, 4
mov edx, [edx+4]
mov eax, [edx + eax*4]
pop edx
ret 4
;-----------------------------------------------------------------------------
align 4
putimage_init32bpp:
shl eax, 2
ret
;-----------------------------------------------------------------------------
align 16
putimage_get32bpp:
lodsd
ret 4
;-----------------------------------------------------------------------------
align 4
putimage_init15bpp:
putimage_init16bpp:
add eax, eax
ret
;-----------------------------------------------------------------------------
align 16
putimage_get15bpp:
; 0RRRRRGGGGGBBBBB -> 00000000RRRRR000GGGGG000BBBBB000
push ecx edx
movzx eax, word [esi]
add esi, 2
mov ecx, eax
mov edx, eax
and eax, 0x1F
and ecx, 0x1F shl 5
and edx, 0x1F shl 10
shl eax, 3
shl ecx, 6
shl edx, 9
or eax, ecx
or eax, edx
pop edx ecx
ret 4
;-----------------------------------------------------------------------------
align 16
putimage_get16bpp:
; RRRRRGGGGGGBBBBB -> 00000000RRRRR000GGGGGG00BBBBB000
push ecx edx
movzx eax, word [esi]
add esi, 2
mov ecx, eax
mov edx, eax
and eax, 0x1F
and ecx, 0x3F shl 5
and edx, 0x1F shl 11
shl eax, 3
shl ecx, 5
shl edx, 8
or eax, ecx
or eax, edx
pop edx ecx
ret 4
;-----------------------------------------------------------------------------
;align 4
; eax x beginning
; ebx y beginning
; ecx x end
; edx y end
; edi color
;__sys_drawbar:
; mov esi, [current_slot]
; mov esi, [esi + APPDATA.window]
; add eax, [esi + WDATA.clientbox.left]
; add ecx, [esi + WDATA.clientbox.left]
; add ebx, [esi + WDATA.clientbox.top]
; add edx, [esi + WDATA.clientbox.top]
;--------------------------------------
;align 4
;.forced:
; call vesa20_drawbar
; call [draw_pointer]
; ret
;-----------------------------------------------------------------------------
if used _rdtsc
_rdtsc:
bt [cpu_caps], CAPS_TSC
jnc .ret_rdtsc
rdtsc
ret
.ret_rdtsc:
mov edx, 0xffffffff
mov eax, 0xffffffff
ret
end if
sys_msg_board_str:
pushad
@@:
cmp [esi], byte 0
je @f
mov ebx, 1
movzx ecx, byte [esi]
call sys_msg_board
inc esi
jmp @b
@@:
popad
ret
sys_msg_board_byte:
; in: al = byte to display
; out: nothing
; destroys: nothing
pushad
mov ecx, 2
shl eax, 24
jmp @f
sys_msg_board_word:
; in: ax = word to display
; out: nothing
; destroys: nothing
pushad
mov ecx, 4
shl eax, 16
jmp @f
sys_msg_board_dword:
; in: eax = dword to display
; out: nothing
; destroys: nothing
pushad
mov ecx, 8
@@:
push ecx
rol eax, 4
push eax
and al, 0xF
cmp al, 10
sbb al, 69h
das
mov cl, al
xor ebx, ebx
inc ebx
call sys_msg_board
pop eax
pop ecx
loop @b
popad
ret
msg_board_data_size = 65536 ; Must be power of two
uglobal
msg_board_data rb msg_board_data_size
msg_board_count dd ?
endg
iglobal
msg_board_pos dd 42*6*65536+10 ; for printing debug output on the screen
endg
sys_msg_board:
; ebx=1 -> write, cl = byte to write
; ebx=2 -> read, ecx=0 -> no data, ecx=1 -> data in al
push eax ebx
mov eax, ebx
mov ebx, ecx
mov ecx, [msg_board_count]
cmp eax, 1
jne .read
if defined debug_com_base
push dx ax
@@: ; wait for empty transmit register
mov dx, debug_com_base+5
in al, dx
test al, 1 shl 5
jz @r
mov dx, debug_com_base ; Output the byte
mov al, bl
out dx, al
pop ax dx
end if
mov [msg_board_data+ecx], bl
cmp byte [debug_direct_print], 1
jnz .end
pusha
lea edx, [msg_board_data+ecx]
mov ecx, 0x40FFFFFF
mov ebx, [msg_board_pos]
mov edi, 1
mov esi, edi ;1
call dtext
popa
add word [msg_board_pos+2], 6
cmp word [msg_board_pos+2], 105*6
jnc @f
cmp bl, 10
jnz .end
@@:
mov word [msg_board_pos+2], 42*6
add word [msg_board_pos], 10
mov eax, [_display.height]
sub eax, 10
cmp ax, word [msg_board_pos]
jnc @f
mov word [msg_board_pos], 10
@@:
pusha
mov eax, [msg_board_pos]
movzx ebx, ax
shr eax, 16
mov edx, 105*6
xor ecx, ecx
mov edi, 1
mov esi, 9
@@:
call hline
inc ebx
dec esi
jnz @b
popa
.end:
inc ecx
and ecx, msg_board_data_size - 1
mov [msg_board_count], ecx
.ret:
pop ebx eax
ret
.read:
cmp eax, 2
jne .ret
add esp, 8 ; returning data in ebx and eax, so no need to restore them
test ecx, ecx
jnz @f
mov [esp + SYSCALL_STACK.eax], ecx
mov [esp + SYSCALL_STACK.ebx], ecx
ret
@@:
mov eax, msg_board_data+1
mov ebx, msg_board_data
movzx edx, byte [ebx]
call memmove
dec [msg_board_count]
mov [esp + SYSCALL_STACK.eax], edx
mov [esp + SYSCALL_STACK.ebx], 1
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; 61 sys function. ;;
;; in eax=61,ebx in [1..3] ;;
;; out eax ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
iglobal
align 4
f61call:
dd sys_gs.1 ; resolution
dd sys_gs.2 ; bits per pixel
dd sys_gs.3 ; bytes per scanline
endg
align 4
sys_gs: ; direct screen access
dec ebx
cmp ebx, 2
ja .not_support
jmp dword [f61call + ebx*4]
.not_support:
or [esp + SYSCALL_STACK.eax], dword -1
ret
.1: ; resolution
mov eax, [_display.width]
shl eax, 16
mov ax, word [_display.height]
mov [esp + SYSCALL_STACK.eax], eax
ret
.2: ; bits per pixel
mov eax, [_display.bits_per_pixel]
mov [esp + SYSCALL_STACK.eax], eax
ret
.3: ; bytes per scanline
mov eax, [_display.lfb_pitch]
mov [esp + SYSCALL_STACK.eax], eax
ret
align 4
syscall_getscreensize: ; GetScreenSize
mov ax, word [_display.width]
dec ax
shl eax, 16
mov ax, word [_display.height]
dec ax
mov [esp + SYSCALL_STACK.eax], eax
ret
;-----------------------------------------------------------------------------
align 4
syscall_cdaudio:
; ECX - position of CD/DVD-drive
; from 0=Primary Master to 3=Secondary Slave for first IDE contr.
; from 4=Primary Master to 7=Secondary Slave for second IDE contr.
; from 8=Primary Master to 11=Secondary Slave for third IDE contr.
cmp ecx, 11
ja .exit
mov eax, ecx
shr eax, 2
lea eax, [eax*5]
mov al, [eax + DRIVE_DATA + 1]
push ecx ebx
mov ebx, ecx
and ebx, 11b
shl ebx, 1
mov cl, 6
sub cl, bl
shr al, cl
test al, 2 ; it's not an ATAPI device
pop ebx ecx
jz .exit
cmp ebx, 4
je .eject
cmp ebx, 5
je .load
;--------------------------------------
.exit:
ret
;--------------------------------------
.load:
call .reserve
call LoadMedium
jmp .free
;--------------------------------------
.eject:
call .reserve
call clear_CD_cache
call allow_medium_removal
call EjectMedium
jmp .free
;--------------------------------------
.reserve:
call reserve_cd
mov ebx, ecx
inc ebx
mov [cdpos], ebx
mov eax, ecx
shr eax, 1
and eax, 1
inc eax
mov [ChannelNumber], al
mov eax, ecx
and eax, 1
mov [DiskNumber], al
call reserve_cd_channel
ret
;--------------------------------------
.free:
call free_cd_channel
and [cd_status], 0
ret
;-----------------------------------------------------------------------------
align 4
syscall_getpixel_WinMap: ; GetPixel WinMap
xor eax, eax
cmp ebx, [_display.width]
jae .store
cmp ecx, [_display.height]
jae .store
;--------------------------------------
mov eax, [d_width_calc_area + ecx*4]
add eax, [_display.win_map]
movzx eax, byte[eax+ebx] ; get value for current point
;--------------------------------------
align 4
.store:
mov [esp + SYSCALL_STACK.eax], eax
ret
;-----------------------------------------------------------------------------
align 4
syscall_getpixel: ; GetPixel
mov ecx, [_display.width]
xor edx, edx
mov eax, ebx
div ecx
mov ebx, edx
xchg eax, ebx
and ecx, 0xFBFFFFFF ;negate 0x04000000 use mouseunder area
call dword [GETPIXEL]; eax - x, ebx - y
mov [esp + SYSCALL_STACK.eax], ecx
ret
;-----------------------------------------------------------------------------
align 4
syscall_getarea:
;eax = 36
;ebx = pointer to bufer for img BBGGRRBBGGRR...
;ecx = [size x]*65536 + [size y]
;edx = [start x]*65536 + [start y]
pushad
mov edi, ebx
mov eax, edx
shr eax, 16
mov ebx, edx
and ebx, 0xffff
dec eax
dec ebx
; eax - x, ebx - y
mov edx, ecx
shr ecx, 16
and edx, 0xffff
mov esi, ecx
; ecx - size x, edx - size y
mov ebp, edx
lea ebp, [ebp*3]
imul ebp, esi
stdcall is_region_userspace, edi, ebp
jnz .exit
mov ebp, edx
dec ebp
lea ebp, [ebp*3]
imul ebp, esi
mov esi, ecx
dec esi
lea esi, [esi*3]
add ebp, esi
add ebp, edi
add ebx, edx
;--------------------------------------
align 4
.start_y:
push ecx edx
;--------------------------------------
align 4
.start_x:
push eax ebx ecx
add eax, ecx
and ecx, 0xFBFFFFFF ;negate 0x04000000 use mouseunder area
call dword [GETPIXEL]; eax - x, ebx - y
mov [ebp], cx
shr ecx, 16
mov [ebp+2], cl
pop ecx ebx eax
sub ebp, 3
dec ecx
jnz .start_x
pop edx ecx
dec ebx
dec edx
jnz .start_y
.exit:
popad
ret
;-----------------------------------------------------------------------------
align 4
syscall_threads: ; CreateThreads
;
; ecx=thread entry point
; edx=thread stack pointer
;
; on return : eax = pid
xor ebx, ebx
call new_sys_threads
mov [esp + SYSCALL_STACK.eax], eax
ret
;------------------------------------------------------------------------------
align 4
calculate_fast_getting_offset_for_WinMapAddress:
; calculate data area for fast getting offset to _WinMapAddress
xor eax, eax
mov ecx, [_display.height]
mov edi, d_width_calc_area
cld
@@:
stosd
add eax, [_display.width]
dec ecx
jnz @r
ret
;------------------------------------------------------------------------------
align 4
calculate_fast_getting_offset_for_LFB:
; calculate data area for fast getting offset to LFB
xor eax, eax
mov ecx, [_display.height]
mov edi, BPSLine_calc_area
cld
@@:
stosd
add eax, [_display.lfb_pitch]
dec ecx
jnz @r
ret
;------------------------------------------------------------------------------
align 4
set_screen:
; in:
; eax - new Screen_Max_X
; ecx - new BytesPerScanLine
; edx - new Screen_Max_Y
pushfd
cli
mov [_display.lfb_pitch], ecx
mov [screen_workarea.right], eax
mov [screen_workarea.bottom], edx
push ebx
push esi
push edi
pushad
cmp [do_not_touch_winmap], 1
je @f
stdcall kernel_free, [_display.win_map]
mov eax, [_display.width]
mul [_display.height]
mov [_display.win_map_size], eax
stdcall kernel_alloc, eax
mov [_display.win_map], eax
test eax, eax
jz .epic_fail
; store for f.18.24
mov eax, [_display.width]
mov [display_width_standard], eax
mov eax, [_display.height]
mov [display_height_standard], eax
@@:
call calculate_fast_getting_offset_for_WinMapAddress
; for Qemu or non standart video cards
; Unfortunately [BytesPerScanLine] does not always
; equal to [_display.width] * [ScreenBPP] / 8
call calculate_fast_getting_offset_for_LFB
popad
call repos_windows
xor eax, eax
xor ebx, ebx
mov ecx, [_display.width]
mov edx, [_display.height]
dec ecx
dec edx
call calculatescreen
pop edi
pop esi
pop ebx
popfd
ret
.epic_fail:
hlt ; Houston, we've had a problem
; --------------- APM ---------------------
uglobal
apm_entry dp 0
apm_vf dd 0
endg
align 4
sys_apm:
xor eax, eax
cmp word [apm_vf], ax ; Check APM BIOS enable
jne @f
inc eax
or dword [esp + 44], eax ; error
add eax, 7
mov dword [esp + SYSCALL_STACK.eax], eax ; 32-bit protected-mode interface not supported
ret
@@:
; xchg eax, ecx
; xchg ebx, ecx
cmp dx, 3
ja @f
and [esp + 44], byte 0xfe ; emulate func 0..3 as func 0
mov eax, [apm_vf]
mov [esp + SYSCALL_STACK.eax], eax
shr eax, 16
mov [esp + SYSCALL_STACK.ecx], eax
ret
@@:
mov esi, [master_tab+(OS_BASE shr 20)]
xchg [master_tab], esi
push esi
mov edi, cr3
mov cr3, edi ;flush TLB
call pword [apm_entry] ;call APM BIOS
xchg eax, [esp]
mov [master_tab], eax
mov eax, cr3
mov cr3, eax
pop eax
mov [esp + SYSCALL_STACK.edi], edi
mov [esp + SYSCALL_STACK.esi], esi
mov [esp + SYSCALL_STACK.ebx], ebx
mov [esp + SYSCALL_STACK.edx], edx
mov [esp + SYSCALL_STACK.ecx], ecx
mov [esp + SYSCALL_STACK.eax], eax
setc al
and [esp + 44], byte 0xfe
or [esp + 44], al
ret
; -----------------------------------------
align 4
undefined_syscall: ; Undefined system call
mov [esp + SYSCALL_STACK.eax], dword -1
ret
align 4
; @brief Check if given memory region lays in lower 2gb (userspace memory) or not
; @param base Base address of region
; @param len Lenght of region
; @return ZF = 1 if region in userspace memory,
; ZF = 0 otherwise
proc is_region_userspace stdcall, base:dword, len:dword
push eax
mov eax, [base]
cmp eax, OS_BASE-1
ja @f ; zf
add eax, [len]
jc @f ; zf
cmp eax, OS_BASE
ja @f ; zf
cmp eax, eax ; ZF
@@:
pop eax
ret
endp
align 4
; @brief Check whether given string lays in userspace memory, i.e. below OS_BASE
; @param base Base address of string
; @return ZF = 1 if string in userspace memory,
; zf = 0 otherwise
proc is_string_userspace stdcall, base:dword
push eax ecx edi
xor eax, eax
mov edi, [base]
mov ecx, OS_BASE-1
sub ecx, edi
jb .done ; zf
inc ecx
cmp ecx, 0x10000 ; don't allow strings larger than 64k?
jbe @f
mov ecx, 0x10000
@@:
repnz scasb
.done:
pop edi ecx eax
ret
endp
if ~ lang eq sp
diff16 "end of .text segment",0,$
end if
include "data32.inc"
__REV__ = __REV
if ~ lang eq sp
diff16 "end of kernel code",0,$
end if