File system: new function 70.4 to set file size

Graphics: fixed error when putimage and drawrect do not draw pixels
          on right and bottom window sides
Processes: fixed kernel fault when program to load is too big
Programs: EYES: now it works with new kernel (rev. 130). Size optimization.
                Blinking deleted.

git-svn-id: svn://kolibrios.org@133 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
Evgeny Grechnikov (Diamond) 2006-08-21 13:06:02 +00:00
parent 8df5cba38d
commit ec76c66cd2
19 changed files with 1571 additions and 1239 deletions

View File

@ -1874,11 +1874,7 @@ fs_RamdiskWrite:
.l1:
; now edi points to direntry, ebx=start byte to write,
; ecx=number of bytes to write, edx=data pointer
call get_time_for_file
mov [edi+22], ax ; last write time
call get_date_for_file
mov [edi+24], ax ; last write date
mov [edi+18], ax ; last access date
call fat_update_datetime
; extend file if needed
add ecx, ebx
@ -1948,7 +1944,7 @@ ramdisk_extend_file.zero_size:
; extends file on ramdisk to given size, new data area is filled by 0
; in: edi->direntry, ecx=new size
; out: CF=0 => OK, eax destroyed
; out: CF=0 => OK, eax=0
; CF=1 => error, eax=code (ERROR_FAT_TABLE or ERROR_DISK_FULL)
ramdisk_extend_file:
push ecx
@ -2036,7 +2032,7 @@ ramdisk_extend_file:
.extend_done:
mov [edi+28], ecx
pop esi edx
clc
xor eax, eax ; CF=0
ret
.disk_full:
pop edi ecx
@ -2046,6 +2042,120 @@ ramdisk_extend_file:
pop eax
ret
fat_update_datetime:
call get_time_for_file
mov [edi+22], ax ; last write time
call get_date_for_file
mov [edi+24], ax ; last write date
mov [edi+18], ax ; last access date
ret
;----------------------------------------------------------------
;
; fs_RamdiskSetFileEnd - set end of file on ramdisk
;
; esi points to filename
; ebx points to 64-bit number = new file size
; ecx ignored (reserved)
; edx ignored (reserved)
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
fs_RamdiskSetFileEnd:
cmp byte [esi], 0
jnz @f
.access_denied:
push ERROR_ACCESS_DENIED
jmp .ret
@@:
push edi
call rd_find_lfn
jnc @f
pop edi
push ERROR_FILE_NOT_FOUND
.ret:
pop eax
ret
@@:
; must not be directory
test byte [edi+11], 10h
jz @f
pop edi
jmp .access_denied
@@:
; file size must not exceed 4Gb
cmp dword [ebx+4], 0
jz @f
pop edi
push ERROR_END_OF_FILE
jmp .ret
@@:
; set file modification date/time to current
call fat_update_datetime
mov eax, [ebx]
cmp eax, [edi+28]
jb .truncate
ja .expand
pop edi
xor eax, eax
ret
.expand:
push ecx
mov ecx, eax
call ramdisk_extend_file
pop ecx
pop edi
ret
.truncate:
mov [edi+28], eax
push ecx
movzx ecx, word [edi+26]
test eax, eax
jz .zero_size
; find new last sector
@@:
sub eax, 0x200
jbe @f
movzx ecx, word [0x280000+ecx*2]
jmp @b
@@:
; zero data at the end of last sector
push ecx
mov edi, ecx
shl edi, 9
lea edi, [edi+0x100000+31*512+eax+0x200]
mov ecx, eax
neg ecx
xor eax, eax
rep stosb
pop ecx
; terminate FAT chain
lea ecx, [0x280000+ecx+ecx]
push dword [ecx]
mov word [ecx], 0xFFF
pop ecx
and ecx, 0xFFF
jmp .delete
.zero_size:
and word [edi+26], 0
.delete:
; delete FAT chain starting with ecx
; mark all clusters as free
cmp ecx, 0xFF8
jae .deleted
lea ecx, [0x280000+ecx+ecx]
push dword [ecx]
and word [ecx], 0
pop ecx
and ecx, 0xFFF
jmp .delete
.deleted:
pop ecx
pop edi
xor eax, eax
ret
fs_RamdiskGetFileInfo:
cmp byte [esi], 0
jnz @f

View File

@ -138,8 +138,7 @@ new_start_application_floppy:
jnz .cleanfailed
call get_app_params ;parse header fields
test esi, esi
jz .cleanfailed
jc .cleanfailed
mov eax,[new_process_place]
inc ecx ; -0x1E = no memory
@ -177,6 +176,7 @@ new_start_application_floppy:
mov edx,eax ;read file block to current page
mov eax,[esp+4] ;restore pointer to file name
mov ecx,8 ;number of blocks read
mov ebp,edx ;save buffer address for .endofimage
push ebx
mov edi,[esp+16]
; cli
@ -184,17 +184,33 @@ new_start_application_floppy:
;ebx=file size
; sti
pop ecx
add ecx,8
test eax,eax
jnz .endloop1 ;check io errors
mov eax,[app_i_end]
add eax,511
shr eax,9
cmp ecx,eax
jg .endofimage ;we have loaded whole program
add ebx,511
shr ebx,9
cmp ecx,ebx
jg .endloop1 ;if end of file?
mov ebx,ecx
test eax,eax
jnz .endloop1 ;check io errors
pop edx
add ebx,8 ;go to next page
add edx,4
jmp .loop1
.endofimage: ;set to zero memory at end of page
mov ecx,[app_i_end]
and ecx,4096-1
jz .endloop1
lea edi,[ebp+ecx]
neg ecx
add ecx,4096
xor eax,eax
cld
rep stosb
.endloop1:
add esp,8+4 ;pop linear address of page table entry and pointer to file name
call new_start_application_fl.add_app_parameters
@ -303,8 +319,7 @@ new_start_application_fl:
jnz .cleanfailed
call get_app_params ;parse header fields
test esi,esi
jz .cleanfailed
jc .cleanfailed
mov eax,[new_process_place]
inc ecx ; -0x1E = no memory
@ -342,23 +357,40 @@ new_start_application_fl:
mov edx,eax ;read file block to current page
mov eax,[esp+4] ;restore pointer to file name
mov ecx,8 ;number of blocks read
mov ebp,edx ;save buffer address for .endofimage
push ebx
cli
call fileread
;ebx=file size
call safe_sti
pop ecx
add ecx,8
test eax,eax
jnz .endloop1 ;check io errors
mov eax,[app_i_end]
add eax,511
shr eax,9
cmp ecx,eax
jg .endofimage ;we have loaded whole program
add ebx,511
shr ebx,9
cmp ecx,ebx
jg .endloop1 ;if end of file?
mov ebx,ecx
test eax,eax
jnz .endloop1 ;check io errors
pop edx
add ebx,8 ;go to next page
add edx,4
jmp .loop1
.endofimage: ;set to zero memory at end of page
mov ecx,[app_i_end]
and ecx,4096-1
jz .endloop1
lea edi,[ebp+ecx]
neg ecx
add ecx,4096
xor eax,eax
cld
rep stosb
.endloop1:
add esp,8 ;pop linear address of page table entry and pointer to file name
call .add_app_parameters
@ -1267,8 +1299,7 @@ new_start_application_hd:
rep movsd ;copy first block to 0x90000 address for get_app_params function
call get_app_params
mov ecx, -0x1F ; not Menuet/Kolibri executable
test esi,esi
jz .cleanfailed
jc .cleanfailed
mov eax,[new_process_place]
inc ecx ; -0x1E = no memory
@ -1502,8 +1533,12 @@ fs_execute:
jnz .cleanfailed
call get_app_params
mov ecx, -0x1F
test esi, esi
jz .cleanfailed
jc .cleanfailed
; sanity check - because we will load all file,
; file size must be not greater than memory size
mov eax, [esp+8+36]
cmp [app_mem], eax
jb .cleanfailed
mov eax, [new_process_place]
inc ecx ; -0x1E = no memory

View File

@ -614,6 +614,12 @@ get_app_params:
mov [app_i_end],eax
mov eax,[0x90000+20]
mov [app_mem],eax
; \begin{diamond}[20.08.2006]
; sanity check (functions 19,58 load app_i_end bytes and that must
; fit in allocated memory to prevent kernel faults)
cmp eax,[app_i_end]
jb no_01_header
; \end{diamond}[20.08.2006]
shr eax,1
sub eax,0x10
mov [app_esp],eax
@ -622,7 +628,7 @@ get_app_params:
mov [app_i_icon],dword 0
pop eax
mov esi,1
clc
ret
no_00_header:
@ -637,6 +643,10 @@ get_app_params:
mov [app_i_end],eax
mov eax,[0x90000+20]
mov [app_mem],eax
; \begin{diamond}[20.08.2006]
cmp eax,[app_i_end]
jb no_01_header
; \end{diamond}[20.08.2006]
mov eax,[0x90000+24]
mov [app_esp],eax
mov eax,[0x90000+28]
@ -645,13 +655,13 @@ get_app_params:
mov [app_i_icon],eax
pop eax
mov esi,1
clc
ret
no_01_header:
pop eax
mov esi,0
stc
ret

View File

@ -49,7 +49,7 @@ floppy_free_space:
call read_flp_fat
cmp [FDC_Status],0
jne fdc_status_error_2
mov eax,0x282000
mov eax,0x282004
xor edi,edi
mov ecx,2847 ;1448000/512
rdfs1_1:
@ -1828,8 +1828,7 @@ fs_FloppyRewrite:
call dword [eax+12] ; flush directory
push ecx
push edi
add edi, 26 ; edi points to low word of cluster
push edi
push 0
mov esi, edx
jecxz .done
mov ecx, 2849
@ -1846,15 +1845,15 @@ fs_FloppyRewrite:
lea eax, [edi-0x282000]
shr eax, 1 ; eax = cluster
mov word [edi], 0xFFF ; mark as last cluster
xchg edi, [esp+4]
cmp dword [esp], 0
jz .first
xchg edi, [esp+4]
stosw
mov edi, [esp+4]
jmp @f
.first:
mov [esp], eax
@@:
mov edi, [esp+4]
inc ecx
; write data
push ecx edi
@ -2133,7 +2132,7 @@ floppy_extend_file.zero_size:
; extends file on floppy to given size (new data area is undefined)
; in: edi->direntry, ecx=new size
; out: CF=0 => OK, eax destroyed
; out: CF=0 => OK, eax=0
; CF=1 => error, eax=code (ERROR_FAT_TABLE or ERROR_DISK_FULL)
floppy_extend_file:
push ecx
@ -2208,7 +2207,7 @@ floppy_extend_file:
.extend_done:
mov [edi+28], ecx
pop esi edx
clc
xor eax, eax ; CF=0
ret
.disk_full:
pop edi ecx
@ -2218,6 +2217,213 @@ floppy_extend_file:
pop eax
ret
;----------------------------------------------------------------
;
; fs_FloppySetFileEnd - set end of file on floppy
;
; esi points to filename
; ebx points to 64-bit number = new file size
; ecx ignored (reserved)
; edx ignored (reserved)
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
fs_FloppySetFileEnd:
call read_flp_fat
cmp [FDC_Status], 0
jnz ret11
cmp byte [esi], 0
jnz @f
.access_denied:
push ERROR_ACCESS_DENIED
jmp .ret
@@:
push edi
call fd_find_lfn
jnc @f
pop edi
push ERROR_FILE_NOT_FOUND
.ret:
pop eax
jmp .doret
@@:
; must not be directory
test byte [edi+11], 10h
jz @f
pop edi
jmp .access_denied
@@:
; file size must not exceed 4 Gb
cmp dword [ebx+4], 0
jz @f
pop edi
push ERROR_END_OF_FILE
jmp .ret
@@:
push eax
; set file modification date/time to current
call fat_update_datetime
mov eax, [ebx]
cmp eax, [edi+28]
jb .truncate
ja .expand
pop eax
pushad
call save_chs_sector
popad
pop edi
xor eax, eax
cmp [FDC_Status], 0
jz @f
mov al, 11
@@:
.doret:
mov [fdc_irq_func], fdc_null
ret
.expand:
push ecx
push dword [edi+28] ; save old size
mov ecx, eax
call floppy_extend_file
push eax ; return code
jnc .expand_ok
cmp al, ERROR_DISK_FULL
jz .disk_full
pop eax ecx ecx edi edi
jmp .doret
.device_err:
pop eax
.device_err2:
pop ecx ecx eax edi
push 11
jmp .ret
.disk_full:
.expand_ok:
; save directory & FAT
mov eax, [edi+28]
xchg eax, [esp+12]
movzx edi, word [edi+26]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jnz .device_err
call save_flp_fat
cmp [FDC_Status], 0
jnz .device_err
call SetUserInterrupts
; now zero new data
; edi = current cluster, [esp+12]=new size, [esp+4]=old size, [esp]=return code
.zero_loop:
sub dword [esp+4], 0x200
jae .next_cluster
cmp dword [esp+4], -0x200
jz .noread
lea eax, [edi+31]
pusha
call read_chs_sector
popa
cmp [FDC_Status], 0
jnz .err_next
.noread:
mov ecx, [esp+4]
neg ecx
push edi
mov edi, 0xD000+0x200
add edi, [esp+8]
xor eax, eax
mov [esp+8], eax
rep stosb
pop edi
lea eax, [edi+31]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jz .next_cluster
.err_next:
mov byte [esp], 11
.next_cluster:
sub dword [esp+12], 0x200
jbe .expand_done
movzx edi, word [0x282000+edi*2]
jmp .zero_loop
.expand_done:
pop eax ecx ecx edi edi
jmp .doret
.truncate:
mov [edi+28], eax
push ecx
movzx ecx, word [edi+26]
test eax, eax
jz .zero_size
; find new last sector
@@:
sub eax, 0x200
jbe @f
movzx ecx, word [0x282000+ecx*2]
jmp @b
@@:
; we will zero data at the end of last sector - remember it
push ecx
; terminate FAT chain
lea ecx, [0x282000+ecx+ecx]
push dword [ecx]
mov word [ecx], 0xFFF
pop ecx
and ecx, 0xFFF
jmp .delete
.zero_size:
and word [edi+26], 0
push 0
.delete:
; delete FAT chain starting with ecx
; mark all clusters as free
cmp ecx, 0xFF8
jae .deleted
lea ecx, [0x282000+ecx+ecx]
push dword [ecx]
and word [ecx], 0
pop ecx
and ecx, 0xFFF
jmp .delete
.deleted:
mov edi, [edi+28]
; save directory & FAT
mov eax, [esp+8]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jnz .device_err2
call save_flp_fat
cmp [FDC_Status], 0
jnz .device_err2
; zero last sector, ignore errors
pop eax
add eax, 31
and edi, 0x1FF
jz .truncate_done
call SetUserInterrupts
pusha
call read_chs_sector
popa
add edi, 0xD000
mov ecx, 0xD000+0x200
sub ecx, edi
push eax
xor eax, eax
rep stosb
pop eax
pusha
call save_chs_sector
popa
.truncate_done:
pop ecx eax edi
xor eax, eax
jmp .doret
fs_FloppyGetFileInfo:
call read_flp_fat
cmp [FDC_Status], 0

View File

@ -90,6 +90,7 @@ uglobal
Sector512: ; label for dev_hdcd.inc
buffer: times 512 db 0
deltree_buffer: times 512 db 0
fsinfo_buffer: times 512 db 0
endg
iglobal
@ -1037,7 +1038,7 @@ add_disk_free_space:
push eax ebx
mov eax,[ADR_FSINFO]
mov ebx,buffer
mov ebx,fsinfo_buffer
call hd_read
cmp [hd_error],0
jne add_not_fs
@ -1047,8 +1048,8 @@ add_disk_free_space:
add [ebx+0x1e8],ecx
call hd_write
cmp [hd_error],0
jne add_not_fs
; cmp [hd_error],0
; jne add_not_fs
add_not_fs:
pop ebx eax
@ -1057,368 +1058,6 @@ add_disk_free_space:
ret
file_append:
;-----------------------------------------------------
; input : eax = file name
; edx = path
; ecx = pointer to buffer
; ebx = bytes to write (0 = truncate file)
; esi = start position (-1 = end of file)
; output : eax = 0 - ok
; 3 - unknown FS
; 5 - file not found
; 6 - end of file
; 8 - disk full
; 9 - fat table corrupted
; 10 - access denied
; ebx = bytes written
;-----------------------------------------------------
cmp [fat_type],0
jnz append_fat_ok
mov eax,ERROR_UNKNOWN_FS
ret
append_fat_ok:
; call reserve_hd1
pushad
mov ebx,edx
call get_cluster_of_a_path
jc append_not_found
mov ebx,PUSHAD_EAX ; file name
call analyze_directory
jc append_not_found
mov [sector_tmp],eax
mov [entry_pos],ebx
test byte [ebx+11],0x10 ; is it directory?
jnz append_access ; yes
mov ecx,[ebx+28] ; file size
mov edi,PUSHAD_ESI ; write position
cmp edi,-1 ; -1 = eof
jnz append_inside_file
mov edi,ecx ; file size
append_inside_file:
cmp edi,ecx ; start above old file size?
ja append_eof ; yes
mov [old_filesize],ecx
mov [new_filepos],edi
mov ecx,PUSHAD_EBX ; bytes to write
test ecx,ecx ; truncate?
jz append_truncate ; yes
mov [bytes2write],ecx ; bytes to write
mov esi,PUSHAD_ECX ; pointer to buffer
mov eax,[ebx+20-2] ; FAT entry
mov ax,[ebx+26]
and eax,[fatMASK]
jnz append_find_pos ; first cluster <> 0
mov eax,2
call get_free_FAT
jc append_disk_full
mov ecx,eax ; set files first cluster
mov [ebx+26],cx ; 16 bits low of cluster
shr ecx,16
mov [ebx+20],cx ; 16 bits high of cluster (=0 fat16)
mov edx,[fatEND] ; new end for cluster chain
call set_FAT
cmp [hd_error],0
jne append_access
push eax ; save first cluster
mov eax,[sector_tmp]
mov ebx,buffer
call hd_write ; write new file entry back to disk
cmp [hd_error],0
jne append_access_1
pop eax
append_remove_free:
mov ecx,-1 ; remove 1 cluster from free disk space
call add_disk_free_space ; Note: uses buffer
cmp [hd_error],0
jne append_access
append_found_cluster:
mov [cluster],eax
sub eax,2
mov ecx,[SECTORS_PER_CLUSTER]
imul eax,ecx
add eax,[DATA_START]
xor edi,edi
append_new_sector:
cmp [hd_error],0
jne append_access
push ecx
mov ecx,[bytes2write] ; bytes left in buffer
mov ebx,512
sub ebx,edi ; bytes left in sector
cmp ecx,ebx
jb append_bytes_ok
mov ecx,ebx
append_bytes_ok:
cmp ecx,512 ; overwrite full sector?
jz append_full_sector ; yes
mov ebx,buffer ; overwrite part of sector
call hd_read ; read old sector
cmp [hd_error],0
jne append_access_1
append_full_sector:
sub [bytes2write],ecx
add [new_filepos],ecx
add edi,buffer
cld
rep movsb
pop ecx
mov ebx,buffer
call hd_write
cmp [hd_error],0
jne append_access
cmp [bytes2write],0 ; is all done?
jz append_done
xor edi,edi
inc eax
dec ecx
jnz append_new_sector
mov eax,[cluster]
call get_FAT
cmp [hd_error],0
jne append_access
cmp eax,2
jb append_fat
cmp eax,[LAST_CLUSTER]
jbe append_found_cluster
append_alloc_cluster:
mov eax,2 ; ToDo: use temp array to keep track
call get_free_FAT ; of last free cluster
jc append_disk_full
push eax ; save new cluster
mov edx,[fatEND] ; new end for cluster chain
call set_FAT
cmp [hd_error],0
jne append_access_1
mov edx,eax
mov eax,[cluster]
call set_FAT ; update previous cluster
cmp [hd_error],0
jne append_access_1
pop eax
jmp append_remove_free
append_find_pos:
call find_filepos
mov [cluster],ebx
jnc append_new_sector
test edi,edi
jz append_alloc_cluster
append_fat:
mov eax,ERROR_FAT_TABLE
jmp append_ret_code
append_disk_full:
cmp [hd_error],0
jne append_access
mov eax,ERROR_DISK_FULL
jmp append_ret_code
append_done:
xor eax,eax
append_ret_code:
mov PUSHAD_EAX,eax ; return code
mov eax,[sector_tmp] ; update directory entry
mov ebx,buffer
call hd_read
cmp [hd_error],0
jne append_access
mov ebx,[entry_pos]
mov ecx,[new_filepos]
cmp ecx,[old_filesize] ; is file pos above old size?
jbe append_size_ok ; no
mov [ebx+28],ecx ; new file size
append_size_ok:
call set_current_time_for_entry
mov ebx,buffer
call hd_write ; write new file entry back to disk
cmp [hd_error],0
jne append_access
sub ecx,PUSHAD_ESI ; start position
mov PUSHAD_EBX,ecx ; bytes written
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne append_access_2
mov [hd1_status],0
ret
append_eof:
popad
mov [hd1_status],0
xor ebx,ebx
mov eax,ERROR_END_OF_FILE
ret
append_not_found:
cmp [hd_error],0
jne append_access
popad
mov [hd1_status],0
xor ebx,ebx
mov eax,ERROR_FILE_NOT_FOUND
ret
append_access_1:
add esp,4
append_access:
popad
append_access_2:
mov [hd1_status],0
xor ebx,ebx
mov eax,ERROR_ACCESS_DENIED
ret
append_truncate:
mov edx,[ebx+20-2] ; FAT entry
mov dx,[ebx+26]
and edx,[fatMASK]
mov [ebx+28],edi ; set new file size
test edi,edi ; 0 length file?
jnz truncate_save_size ; no
mov [ebx+20],di ; FAT entry = 0
mov [ebx+26],di
truncate_save_size:
call set_current_time_for_entry
mov ebx,buffer
call hd_write
cmp [hd_error],0
jne append_access
mov eax,edx ; first cluster
test edi,edi ; 0 length file?
jz truncate_clear_chain
imul esi,[SECTORS_PER_CLUSTER],512 ; esi = cluster size in bytes
truncate_new_cluster:
cmp eax,2 ; incorrect fat chain?
jb truncate_eof ; yes
cmp eax,[fatRESERVED] ; is it end of file?
jnb truncate_eof ; yes
sub edi,esi
jbe truncate_pos_found
call get_FAT ; get next cluster
cmp [hd_error],0
jne append_access
jmp truncate_new_cluster
truncate_pos_found:
mov edx,[fatEND] ; new end for cluster chain
call set_FAT
cmp [hd_error],0
jne append_access
mov eax,edx ; clear rest of chain
truncate_clear_chain:
call clear_cluster_chain
cmp [hd_error],0
jne append_access
truncate_eof:
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne append_access_2
mov [hd1_status],0
xor ebx,ebx
xor eax,eax
ret
find_filepos:
;-----------------------------------------------------
; input : eax = first cluster
; edi = bytes to skip over (start position)
; output : if CARRY=0 file position found
; if CARRY=1 end of file found
; eax = current file sector
; ebx = last cluster
; ecx = sector count in last cluster
; edi = bytes to skip over (sector position)
;-----------------------------------------------------
push esi
mov ecx,[SECTORS_PER_CLUSTER]
imul esi,ecx,512 ; esi = cluster size in bytes
mov ebx,eax
filepos_new_cluster:
cmp eax,2 ; incorrect fat chain?
jb filepos_eof ; yes
cmp eax,[fatRESERVED] ; is it end of file?
jnb filepos_eof ; yes
mov ebx,eax
cmp edi,esi ; skip over full cluster?
jb filepos_cluster_ok ; no
sub edi,esi
call get_FAT ; get next cluster
cmp [hd_error],0
jne filepos_eof
jmp filepos_new_cluster
filepos_cluster_ok:
sub eax,2
imul eax,ecx
add eax,[DATA_START]
filepos_new_sector:
cmp edi,512 ; skip over full sector?
jb filepos_sector_ok ; no
sub edi,512
inc eax
dec ecx
jnz filepos_new_sector
filepos_eof:
pop esi
stc
ret
filepos_sector_ok:
pop esi
clc
ret
file_write:
;--------------------------------------------------------------------------
; INPUT : user-reg register-in-this meaning symbol-in-this-routine
@ -3994,7 +3633,7 @@ hd_extend_file.zero_size:
; extends file on hd to given size (new data area is undefined)
; in: edi->direntry, ecx=new size
; out: CF=0 => OK, eax destroyed
; out: CF=0 => OK, eax=0
; CF=1 => error, eax=code (ERROR_FAT_TABLE or ERROR_DISK_FULL or 11)
hd_extend_file:
push ebp
@ -4072,6 +3711,10 @@ hd_extend_file:
ror edx, 16
mov [edi+26], dx
@@:
push ecx
mov ecx, -1
call add_disk_free_space
pop ecx
mov eax, edx
cmp [hd_error], 0
jnz .device_err3
@ -4080,7 +3723,7 @@ hd_extend_file:
.extend_done:
mov [edi+28], ecx
pop edx ebp
clc
xor eax, eax ; CF=0
ret
.device_err3:
pop edx
@ -4095,6 +3738,246 @@ hd_extend_file:
@@: stc
ret
;----------------------------------------------------------------
;
; fs_HdSetFileEnd - set end of file on hard disk
;
; esi points to filename
; ebx points to 64-bit number = new file size
; ecx ignored (reserved)
; edx ignored (reserved)
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
fs_HdSetFileEnd:
cmp [fat_type], 0
jnz @f
push ERROR_UNKNOWN_FS
.ret:
pop eax
ret
@@:
cmp byte [esi], 0
jnz @f
.access_denied:
push ERROR_ACCESS_DENIED
jmp .ret
@@:
push edi
call hd_find_lfn
pushfd
cmp [hd_error], 0
jz @f
popfd
push 11
jmp .ret
@@:
popfd
jnc @f
pop edi
push ERROR_FILE_NOT_FOUND
jmp .ret
@@:
; must not be directory
test byte [edi+11], 10h
jz @f
pop edi
jmp .access_denied
@@:
; file size must not exceed 4 Gb
cmp dword [ebx+4], 0
jz @f
pop edi
push ERROR_END_OF_FILE
jmp .ret
@@:
push eax ; save directory sector
; set file modification date/time to current
call fat_update_datetime
mov eax, [ebx]
cmp eax, [edi+28]
jb .truncate
ja .expand
pop eax
mov ebx, buffer
call hd_write
pop edi
xor eax, eax
cmp [hd_error], 0
jz @f
mov al, 11
@@:
ret
.expand:
push ebx ebp ecx
push dword [edi+28] ; save old size
mov ecx, eax
call hd_extend_file
push eax ; return code
jnc .expand_ok
cmp al, ERROR_DISK_FULL
jz .disk_full
.pop_ret:
call update_disk
pop eax ecx ebp ebx ecx edi edi
ret
.expand_ok:
.disk_full:
; save directory
mov eax, [edi+28]
xchg eax, [esp+20]
mov ebx, buffer
call hd_write
mov eax, [edi+20-2]
mov ax, [edi+26]
mov edi, eax
cmp [hd_error], 0
jz @f
.pop_ret11:
mov byte [esp], 11
jmp .pop_ret
@@:
; now zero new data
xor ebp, ebp
; edi=current cluster, ebp=sector in cluster
; [esp+20]=new size, [esp+4]=old size, [esp]=return code
.zero_loop:
sub dword [esp+4], 0x200
jae .next_cluster
lea eax, [edi-2]
imul eax, [SECTORS_PER_CLUSTER]
add eax, [DATA_START]
add eax, ebp
cmp dword [esp+4], -0x200
jz .noread
mov ebx, buffer
call hd_read
cmp [hd_error], 0
jnz .err_next
.noread:
mov ecx, [esp+4]
neg ecx
push edi
mov edi, buffer+0x200
add edi, [esp+8]
push eax
xor eax, eax
mov [esp+12], eax
rep stosb
pop eax
pop edi
call hd_write
cmp [hd_error], 0
jz .next_cluster
.err_next:
mov byte [esp], 11
.next_cluster:
sub dword [esp+20], 0x200
jbe .pop_ret
inc ebp
cmp ebp, [SECTORS_PER_CLUSTER]
jb .zero_loop
xor ebp, ebp
mov eax, edi
call get_FAT
mov edi, eax
cmp [hd_error], 0
jnz .pop_ret11
jmp .zero_loop
.truncate:
mov [edi+28], eax
push ecx
mov ecx, [edi+20-2]
mov cx, [edi+26]
push eax
test eax, eax
jz .zero_size
; find new last cluster
@@:
mov eax, [SECTORS_PER_CLUSTER]
shl eax, 9
sub [esp], eax
jbe @f
mov eax, ecx
call get_FAT
mov ecx, eax
cmp [hd_error], 0
jz @b
.device_err3:
pop eax ecx eax edi
push 11
pop eax
ret
@@:
; we will zero data at the end of last sector - remember it
push ecx
; terminate FAT chain
push edx
mov eax, ecx
mov edx, [fatEND]
call set_FAT
mov eax, edx
pop edx
cmp [hd_error], 0
jz @f
.device_err4:
pop ecx
jmp .device_err3
.zero_size:
and word [edi+20], 0
and word [edi+26], 0
push 0
mov eax, ecx
@@:
; delete FAT chain
call clear_cluster_chain
cmp [hd_error], 0
jnz .device_err4
; save directory
mov eax, [esp+12]
push ebx
mov ebx, buffer
call hd_write
pop ebx
cmp [hd_error], 0
jnz .device_err4
; zero last sector, ignore errors
pop ecx
pop eax
dec ecx
imul ecx, [SECTORS_PER_CLUSTER]
add ecx, [DATA_START]
push eax
sar eax, 9
add ecx, eax
pop eax
and eax, 0x1FF
jz .truncate_done
push ebx eax
mov eax, ecx
mov ebx, buffer
call hd_read
pop eax
lea edi, [buffer+eax]
push ecx
mov ecx, 0x200
sub ecx, eax
xor eax, eax
rep stosb
pop eax
call hd_write
pop ebx
.truncate_done:
pop ecx eax edi
call update_disk
xor eax, eax
cmp [hd_error], 0
jz @f
mov al, 11
@@:
ret
fs_HdGetFileInfo:
cmp [fat_type], 0
jnz @f

View File

@ -35,10 +35,9 @@ file_system:
; IN:
;
; eax = 0 ; read file /RamDisk/First 6 /HardDisk/First 30
; eax = 0 ; read file /RamDisk/First 6
; eax = 1 ; write file /RamDisk/First 33 /HardDisk/First 56
; eax = 2 ; delete file /RamDisk/First 32 /HardDisk/First 57
; eax = 3 ; append to a file /RamDisk/First ?? /HardDisk/First ??
; eax = 2 ; delete file /RamDisk/First 32
; eax = 4 ; makedir
; eax = 5 ; rename file/directory
; eax = 8 ; lba read
@ -103,10 +102,7 @@ file_system:
jz no_checks_for_kernel
mov edx,eax
cmp dword [eax+0],1
jz .check_for_write_op
cmp dword [eax+0],3
jnz .usual_check
.check_for_write_op:
mov ebx,[eax+12]
add ebx,std_application_base_address
mov ecx,[eax+8]
@ -139,13 +135,6 @@ endg
mov eax,edx
no_checks_for_kernel:
cmp dword [eax+0],3 ; APPEND - allow write 0 bytes (truncate)
je fs_read
cmp dword [eax+8],0 ; read or write 0 blocks/bytes ?
jne fs_read
and dword [esp+36],0
ret
fs_read:
mov ebx,[eax+20] ; program wants root directory ?
@ -602,27 +591,6 @@ hd_err_return:
fs_noharddisk_delete:
cmp dword [esp+20],3 ; APPEND
jne fs_noharddisk_append
mov eax,[esp+0] ; /dirname or /filename
mov byte [eax],0 ; path to asciiz
inc eax ; filename start
mov edx,[esp+4]
add edx,12*2 ; path start
mov ecx,[esp+8] ; buffer
mov ebx,[esp+12] ; count to write
mov esi,[esp+16] ; bytes to skip over
call file_append
mov edi,[esp+0]
mov byte [edi],'/'
jmp file_system_return
fs_noharddisk_append:
cmp dword [esp+20],4 ; MAKEDIR
jne fs_noharddisk_makedir

View File

@ -77,8 +77,8 @@ file_system_lfn:
; 0 : read file
; 1 : read folder
; 2 : create/rewrite file
; 3 : write/append to file - not implemented yet
; 4 : set end of file - not implemented yet
; 3 : write/append to file
; 4 : set end of file
; 5 : get file/directory attributes structure
; 6 : set file/directory attributes structure
; 7 : start application
@ -348,7 +348,7 @@ fs_RamdiskServices:
dd fs_RamdiskReadFolder
dd fs_RamdiskRewrite
dd fs_RamdiskWrite
dd fs_NotImplemented
dd fs_RamdiskSetFileEnd
dd fs_RamdiskGetFileInfo
dd fs_RamdiskSetFileInfo
dd fs_RamdiskExecute
@ -377,7 +377,7 @@ fs_FloppyServices:
dd fs_FloppyReadFolder
dd fs_FloppyRewrite
dd fs_FloppyWrite
dd fs_NotImplemented
dd fs_FloppySetFileEnd
dd fs_FloppyGetFileInfo
dd fs_FloppySetFileInfo
dd fs_FloppyExecute
@ -448,7 +448,7 @@ fs_HdServices:
dd fs_HdReadFolder
dd fs_HdRewrite
dd fs_HdWrite
dd fs_NotImplemented
dd fs_HdSetFileEnd
dd fs_HdGetFileInfo
dd fs_HdSetFileInfo
dd fs_HdExecute
@ -484,12 +484,12 @@ fs_OnCd:
mov [hdpos], eax
cmp ecx, 0x100
jae .nf
push cx bx
push ecx ebx
mov cl,al
mov bl,[0x40001]
shr bl,cl
test bl,2
pop bx cx
pop ebx ecx
jnz @f
.nf:

View File

@ -127,6 +127,10 @@ vesa20_putimage:
; real_sx = MIN(wnd_sx-image_cx, image_sx);
mov ebx, [eax-twdw + WDATA.box.width] ; ebx = wnd_sx
; \begin{diamond}[20.08.2006]
; note that WDATA.box.width is one pixel less than real window x-size
inc ebx
; \end{diamond}[20.08.2006]
sub ebx, [putimg.image_cx]
ja @f
add esp, putimg.stack_data
@ -136,13 +140,14 @@ vesa20_putimage:
cmp ebx, [putimg.image_sx]
jbe .end_x
mov ebx, [putimg.image_sx]
dec ebx
.end_x:
inc ebx
mov [putimg.real_sx], ebx
; init real_sy
mov ebx, [eax-twdw + WDATA.box.height] ; ebx = wnd_sy
; \begin{diamond}[20.08.2006]
inc ebx
; \end{diamond}[20.08.2006]
sub ebx, [putimg.image_cy]
ja @f
add esp, putimg.stack_data
@ -152,9 +157,7 @@ vesa20_putimage:
cmp ebx, [putimg.image_sy]
jbe .end_y
mov ebx, [putimg.image_sy]
dec ebx
.end_y:
inc ebx
mov [putimg.real_sy], ebx
; line increment
@ -611,6 +614,10 @@ vesa20_drawbar:
; real_sx = MIN(wnd_sx-bar_cx, bar_sx);
mov ebx, [edi-twdw + WDATA.box.width] ; ebx = wnd_sx
; \begin{diamond}[20.08.2006]
; note that WDATA.box.width is one pixel less than real window x-size
inc ebx
; \end{diamond}[20.08.2006]
sub ebx, [drbar.bar_cx]
ja @f
.exit: ;// mike.dld, 2005-01-29
@ -629,6 +636,9 @@ vesa20_drawbar:
; real_sy = MIN(wnd_sy-bar_cy, bar_sy);
mov ebx, [edi-twdw + WDATA.box.height] ; ebx = wnd_sy
; \begin{diamond}[20.08.2006]
inc ebx
; \end{diamond}
sub ebx, [drbar.bar_cy]
ja @f
add esp, drbar.stack_data

View File

@ -1874,11 +1874,7 @@ fs_RamdiskWrite:
.l1:
; now edi points to direntry, ebx=start byte to write,
; ecx=number of bytes to write, edx=data pointer
call get_time_for_file
mov [edi+22], ax ; last write time
call get_date_for_file
mov [edi+24], ax ; last write date
mov [edi+18], ax ; last access date
call fat_update_datetime
; extend file if needed
add ecx, ebx
@ -1948,7 +1944,7 @@ ramdisk_extend_file.zero_size:
; extends file on ramdisk to given size, new data area is filled by 0
; in: edi->direntry, ecx=new size
; out: CF=0 => OK, eax destroyed
; out: CF=0 => OK, eax=0
; CF=1 => error, eax=code (ERROR_FAT_TABLE or ERROR_DISK_FULL)
ramdisk_extend_file:
push ecx
@ -2036,7 +2032,7 @@ ramdisk_extend_file:
.extend_done:
mov [edi+28], ecx
pop esi edx
clc
xor eax, eax ; CF=0
ret
.disk_full:
pop edi ecx
@ -2046,6 +2042,120 @@ ramdisk_extend_file:
pop eax
ret
fat_update_datetime:
call get_time_for_file
mov [edi+22], ax ; last write time
call get_date_for_file
mov [edi+24], ax ; last write date
mov [edi+18], ax ; last access date
ret
;----------------------------------------------------------------
;
; fs_RamdiskSetFileEnd - set end of file on ramdisk
;
; esi points to filename
; ebx points to 64-bit number = new file size
; ecx ignored (reserved)
; edx ignored (reserved)
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
fs_RamdiskSetFileEnd:
cmp byte [esi], 0
jnz @f
.access_denied:
push ERROR_ACCESS_DENIED
jmp .ret
@@:
push edi
call rd_find_lfn
jnc @f
pop edi
push ERROR_FILE_NOT_FOUND
.ret:
pop eax
ret
@@:
; must not be directory
test byte [edi+11], 10h
jz @f
pop edi
jmp .access_denied
@@:
; file size must not exceed 4Gb
cmp dword [ebx+4], 0
jz @f
pop edi
push ERROR_END_OF_FILE
jmp .ret
@@:
; set file modification date/time to current
call fat_update_datetime
mov eax, [ebx]
cmp eax, [edi+28]
jb .truncate
ja .expand
pop edi
xor eax, eax
ret
.expand:
push ecx
mov ecx, eax
call ramdisk_extend_file
pop ecx
pop edi
ret
.truncate:
mov [edi+28], eax
push ecx
movzx ecx, word [edi+26]
test eax, eax
jz .zero_size
; find new last sector
@@:
sub eax, 0x200
jbe @f
movzx ecx, word [0x280000+ecx*2]
jmp @b
@@:
; zero data at the end of last sector
push ecx
mov edi, ecx
shl edi, 9
lea edi, [edi+0x100000+31*512+eax+0x200]
mov ecx, eax
neg ecx
xor eax, eax
rep stosb
pop ecx
; terminate FAT chain
lea ecx, [0x280000+ecx+ecx]
push dword [ecx]
mov word [ecx], 0xFFF
pop ecx
and ecx, 0xFFF
jmp .delete
.zero_size:
and word [edi+26], 0
.delete:
; delete FAT chain starting with ecx
; mark all clusters as free
cmp ecx, 0xFF8
jae .deleted
lea ecx, [0x280000+ecx+ecx]
push dword [ecx]
and word [ecx], 0
pop ecx
and ecx, 0xFFF
jmp .delete
.deleted:
pop ecx
pop edi
xor eax, eax
ret
fs_RamdiskGetFileInfo:
cmp byte [esi], 0
jnz @f

View File

@ -138,8 +138,7 @@ new_start_application_floppy:
jnz .cleanfailed
call get_app_params ;parse header fields
test esi, esi
jz .cleanfailed
jc .cleanfailed
mov eax,[new_process_place]
inc ecx ; -0x1E = no memory
@ -320,8 +319,7 @@ new_start_application_fl:
jnz .cleanfailed
call get_app_params ;parse header fields
test esi,esi
jz .cleanfailed
jc .cleanfailed
mov eax,[new_process_place]
inc ecx ; -0x1E = no memory
@ -1301,8 +1299,7 @@ new_start_application_hd:
rep movsd ;copy first block to 0x90000 address for get_app_params function
call get_app_params
mov ecx, -0x1F ; not Menuet/Kolibri executable
test esi,esi
jz .cleanfailed
jc .cleanfailed
mov eax,[new_process_place]
inc ecx ; -0x1E = no memory
@ -1536,8 +1533,12 @@ fs_execute:
jnz .cleanfailed
call get_app_params
mov ecx, -0x1F
test esi, esi
jz .cleanfailed
jc .cleanfailed
; sanity check - because we will load all file,
; file size must be not greater than memory size
mov eax, [esp+8+36]
cmp [app_mem], eax
jb .cleanfailed
mov eax, [new_process_place]
inc ecx ; -0x1E = no memory

View File

@ -614,6 +614,12 @@ get_app_params:
mov [app_i_end],eax
mov eax,[0x90000+20]
mov [app_mem],eax
; \begin{diamond}[20.08.2006]
; sanity check (functions 19,58 load app_i_end bytes and that must
; fit in allocated memory to prevent kernel faults)
cmp eax,[app_i_end]
jb no_01_header
; \end{diamond}[20.08.2006]
shr eax,1
sub eax,0x10
mov [app_esp],eax
@ -622,7 +628,7 @@ get_app_params:
mov [app_i_icon],dword 0
pop eax
mov esi,1
clc
ret
no_00_header:
@ -637,6 +643,10 @@ get_app_params:
mov [app_i_end],eax
mov eax,[0x90000+20]
mov [app_mem],eax
; \begin{diamond}[20.08.2006]
cmp eax,[app_i_end]
jb no_01_header
; \end{diamond}[20.08.2006]
mov eax,[0x90000+24]
mov [app_esp],eax
mov eax,[0x90000+28]
@ -645,13 +655,13 @@ get_app_params:
mov [app_i_icon],eax
pop eax
mov esi,1
clc
ret
no_01_header:
pop eax
mov esi,0
stc
ret

View File

@ -985,6 +985,7 @@ db 'Kolibri',0
§­ η¥­¨οε ­¥Ά®§¬®¦­® ―¥ΰ¥¤Ά¨¦¥­¨¥ ¬λθ¨ ­  1 ―¨<E28095>α¥«μ ¨ <20>γΰα®ΰ ΅γ¤¥β
―ΰλ£ βμ ­  Ά¥«¨η¨­γ γαβ ­®Ά«¥­­®© α<>®ΰ®αβ¨ (―®¤―®¤δγ­<CEB3>ζ¨ο 1).
“αβ ­ Ά«¨Ά ¥¬ ο Ά¥«¨η¨­  ­¥ ―ΰ®Ά¥ΰο¥βαο <20>®¤®¬ ο¤ΰ .
‚¥«¨ç¨­ã § ¤¥à¦ª¨ ¬®¦­® ¬¥­ïâì ¢ ¯à¨«®¦¥­¨¨ SETUP.
* <20>®¤―®¤δγ­<CEB3>ζ¨ο 4 ­¥ ―ΰ®Ά¥ΰο¥β ―¥ΰ¥¤ ­­®¥ §­ η¥­¨¥. <20>¥ΰ¥¤ Άλ§®Ά®¬
­¥®΅ε®¤¨¬® γ§­ βμ β¥<CEB2>γι¥¥ ΰ §ΰ¥θ¥­¨¥ ν<>ΰ ­  (―®¤δγ­<CEB3>樥© 14)
¨ ―ΰ®Ά¥ΰ¨βμ, ηβ® γαβ ­ Ά«¨Ά ¥¬®¥ ―®«®¦¥­¨¥ ­¥ Άλ室¨β §  ―।¥«λ
@ -1850,6 +1851,8 @@ db 'Kolibri',0
* ecx = [<5B>®®ΰ¤¨­ β  ­ η «  ―® ®α¨ y]*65536 +
[<5B>®®ΰ¤¨­ β  <20>®­ζ  ―® ®α¨ y]
* edx = 0x00RRGGBB - ζΆ¥β
edx = 0x01xxxxxx - à¨á®¢ âì ¨­¢¥àá­ë© ®â१®ª
(¬« ¤è¨¥ 24 ¡¨â  ¨£­®à¨àãîâáï)
‚®§Άΰ ι ¥¬®¥ §­ η¥­¨¥:
* δγ­<CEB3>ζ¨ο ­¥ Ά®§Άΰ ι ¥β §­ η¥­¨ο
‡ ¬¥η ­¨ο:
@ -2901,7 +2904,6 @@ dword-
* ―®¤δγ­<CEB3>ζ¨ο 0 - ηβ¥­¨¥ δ ©« /― <C2A0>¨
* ―®¤δγ­<CEB3>ζ¨ο 1 - ―¥ΰ¥§ ―¨αμ δ ©« 
* ―®¤δγ­<CEB3>ζ¨ο 2 - γ¤ «¥­¨¥ δ ©« /― <C2A0>¨
* ―®¤δγ­<CEB3>ζ¨ο 3 - § ―¨αμ ¤ ­­λε Ά αγι¥αβΆγξ騩 δ ©«
* ―®¤δγ­<CEB3>ζ¨ο 4 - ᮧ¤ ­¨¥ ― <C2A0>¨
* ―®¤δγ­<CEB3>ζ¨ο 5 - ―¥ΰ¥¨¬¥­®Ά ­¨¥/―¥ΰ¥¬¥ι¥­¨¥ δ ©« /― <C2A0>¨
* ―®¤δγ­<CEB3>ζ¨ο 8 - LBA-ηβ¥­¨¥ α γαβΰ®©αβΆ 
@ -3016,39 +3018,6 @@ dword-
(β.¥. ΰ¥<CEB0>γΰα¨Ά­® α® Άα¥¬¨ δ ©« ¬¨ ¨ Ά«®¦¥­­λ¬¨ ― <C2A0> ¬¨).
<20> ¬¤¨α<C2A8> ―®<E28095> ­¥ ―®¤¤¥ΰ¦¨Ά ¥β.
======================================================================
==== ”γ­<CEB3>ζ¨ο 58, ―®¤δγ­<CEB3>ζ¨ο 3 - § ―¨αμ ¤ ­­λε Ά αγι¥αβΆγξ騩 δ ©«. ===
======================================================================
<EFBFBD> ΰ ¬¥βΰλ:
* eax = 58 - ­®¬¥ΰ δγ­<CEB3>樨
* ebx = γ<> § β¥«μ ­  ¨­δ®ΰ¬ ζ¨®­­γξ αβΰγ<CEB0>βγΰγ
”®ΰ¬ β ¨­δ®ΰ¬ ζ¨®­­®© αβΰγ<CEB0>βγΰλ:
* +0: dword: 3 = ­®¬¥ΰ ―®¤δγ­<CEB3>樨
* +4: dword: ­ η «μ­ ο ―®§¨ζ¨ο Ά δ ©«¥; -1 = ¤®―¨αλΆ βμ Ά <20>®­¥ζ
* +8: dword: η¨α«® ΅ ©β ¤«ο § ―¨α¨
* +12 = +0xC: dword: γ<> § β¥«μ ­  ¤ ­­λ¥ ¤«ο § ―¨α¨
* +16 = +0x10: dword: γ<> § β¥«μ ­  ΅γδ¥ΰ ¤«ο ΰ ΅®βλ α¨α⥬λ
(4096 ΅ ©β)
* +20 = +0x14: ASCIIZ-¨¬ο δ ©« , ―ΰ Ά¨«  δ®ΰ¬¨ΰ®Ά ­¨ο ¨¬ρ­ γ<> § ­λ Ά
®΅ι¥¬ ®―¨α ­¨¨
‚®§Άΰ ι ¥¬®¥ §­ η¥­¨¥:
* eax = 0 - γα―¥θ­®, ¨­ η¥ <20>®¤ ®θ¨΅<C2A8>¨ δ ©«®Ά®© α¨α⥬λ
* ebx ΰ §ΰγθ ¥βαο
‡ ¬¥η ­¨ο:
* <20>β  δγ­<CEB3>ζ¨ο γαβ ΰ¥« , ¨α―®«μ§γ©β¥ ―®¤δγ­<CEB3>ζ¨ξ 3 δγ­<CEB3>樨 70.
* <20> ¬¤¨α<C2A8> ¨ ¤¨α<C2A8>¥βλ ­¥ ―®¤¤¥ΰ¦¨Ά ξβ νβγ δγ­<CEB3>ζ¨ξ, ®­  β®«μ<C2AB>® ¤«ο
¦ραβ<CEB1>¨ε ¤¨α<C2A8>®Ά.
* ” ©« ¤®«¦¥­ 㦥 αγι¥αβΆ®Ά βμ (¨­ η¥ Ά®§Άΰ ι ¥βαο 5, not found).
„«ο ᮧ¤ ­¨ο δ ©«®Ά ¨α―®«μ§γ©β¥ ―®¤δγ­<CEB3>ζ¨ξ 1.
* …᫨ ­ η «μ­ ο ―®§¨ζ¨ο ΅®«μθ¥ ΰ §¬¥ΰ  δ ©« , Ά®§Άΰ ι ¥βαο
eax=6(EOF). …᫨ <20>®­¥η­ ο ―®§¨ζ¨ο ΅®«μθ¥ ΰ §¬¥ΰ  δ ©« ,
δ ©« ΰ αθ¨ΰο¥βαο.
* <20>®¤ ®΅ΰ ΅®β<C2AE>¨ § ―¨α¨ ¤ ­­λε ¤«ο ¦ραβ<CEB1>®£® ¤¨α<C2A8>  ¨­β¥ΰ―ΰ¥β¨ΰγ¥β
­γ«¥Ά®¥ §­ η¥­¨¥ ―®«ο +8 <20> <EFBFBD> γ<> § ­¨¥ γα¥η¥­¨ο δ ©«  ¤® ΰ §¬¥ΰ ,
γ<> § ­­®£® Ά ―®«¥ +4. <20>¤­ <C2AD>® <20>®¤ ®΅ΰ ΅®β<C2AE>¨ 58-© δγ­<CEB3>樨 ΅«®<C2AB>¨ΰγ¥β
νβγ Ά®§¬®¦­®αβμ ¤«ο ―ਫ®¦¥­¨©, αΰ §γ Ά®§Άΰ ι ο γ―ΰ Ά«¥­¨¥
(α eax=0) Ά α«γη ¥ ­γ«¥Ά®£® ΰ §¬¥ΰ .
======================================================================
============== ”γ­<CEB3>ζ¨ο 58, ―®¤δγ­<CEB3>ζ¨ο 4 - ᮧ¤ βμ ― <C2A0>γ. =============
======================================================================
@ -4139,6 +4108,7 @@ Architecture Software Developer's Manual, Volume 3, Appendix B);
* ―®¤δγ­<CEB3>ζ¨ο 1 - ηβ¥­¨¥ ― <C2A0>¨
* ―®¤δγ­<CEB3>ζ¨ο 2 - ᮧ¤ ­¨¥/―¥ΰ¥§ ―¨αμ δ ©« 
* ―®¤δγ­<CEB3>ζ¨ο 3 - § ―¨αμ Ά αγι¥αβΆγξ騩 δ ©«
* ¯®¤äã­ªæ¨ï 4 - ãáâ ­®¢ª  à §¬¥à  ä ©« 
* ―®¤δγ­<CEB3>ζ¨ο 5 - ―®«γη¥­¨¥  βਡγβ®Ά δ ©« /― <C2A0>¨
* ―®¤δγ­<CEB3>ζ¨ο 6 - γαβ ­®Ά<C2AE>   βਡγβ®Ά δ ©« /― <C2A0>¨
* ―®¤δγ­<CEB3>ζ¨ο 7 - § γα<CEB3> ―ணࠬ¬λ
@ -4329,6 +4299,38 @@ Architecture Software Developer's Manual, Volume 3, Appendix B);
* …᫨ ­ η «μ­ ο ¨/¨«¨ <20>®­¥η­ ο ―®§¨ζ¨ο Άλ室¨β §  ―।¥«λ δ ©« 
(§  ¨α<C2A8>«ξη¥­¨¥¬ ―।λ¤γι¥£® α«γη ο), δ ©« ΰ αθ¨ΰο¥βαο ¤®
­¥®΅ε®¤¨¬®£® ΰ §¬¥ΰ  ­γ«¥Άλ¬¨ ᨬΆ®« ¬¨.
* ”ã­ªæ¨ï ­¥ ¯®¤¤¥à¦¨¢ ¥âáï ¤«ï CD (¢¥à­ñâáï ª®¤ ®è¨¡ª¨ 2).
======================================================================
========= ”ã­ªæ¨ï 70, ¯®¤äã­ªæ¨ï 4 - ãáâ ­®¢ª  à §¬¥à  ä ©« . ========
======================================================================
<EFBFBD> à ¬¥âàë:
* eax = 70 - ­®¬¥à ä㭪樨
* ebx = 㪠§ â¥«ì ­  ¨­ä®à¬ æ¨®­­ãî áâàãªâãàã
”®à¬ â ¨­ä®à¬ æ¨®­­®© áâàãªâãàë:
* +0: dword: 4 = ­®¬¥à ¯®¤ä㭪樨
* +4: dword: ¬« ¤è¨© dword ­®¢®£® à §¬¥à  ä ©« 
* +8: dword: áâ à訩 dword ­®¢®£® à §¬¥à  ä ©« 
(¤®«¦¥­ ¡ëâì 0 ¤«ï FAT)
* +12 = +0xC: dword: 0 (§ à¥§¥à¢¨à®¢ ­®)
* +16 = +0x10: dword: 0 (§ à¥§¥à¢¨à®¢ ­®)
* +20 = +0x14: ASCIIZ-¨¬ï ä ©« , ¯à ¢¨«  ä®à¬¨à®¢ ­¨ï ¨¬ñ­ 㪠§ ­ë ¢
®¡é¥¬ ®¯¨á ­¨¨
¨«¨
* +20 = +0x14: db 0
* +21 = +0x15: dd 㪠§ â¥«ì ­  ASCIIZ-áâபã á ¨¬¥­¥¬ ä ©« 
‚®§¢à é ¥¬®¥ §­ ç¥­¨¥:
* eax = 0 - ãᯥ譮, ¨­ ç¥ ª®¤ ®è¨¡ª¨ ä ©«®¢®© á¨á⥬ë
* ebx à §àãè ¥âáï
‡ ¬¥ç ­¨ï:
* …᫨ ­®¢ë© à §¬¥à ä ©«  ¬¥­ìè¥ áâ à®£®, ä ©« ãᥪ ¥âáï. …᫨
­®¢ë© à §¬¥à ¡®«ìè¥ áâ à®£®, ä ©« à áè¨àï¥âáï ­ã«¥¢ë¬¨ ᨬ¢®« ¬¨.
…᫨ ­®¢ë© à §¬¥à à ¢¥­ áâ à®¬ã, ¥¤¨­á⢥­­ë¬ १ã«ìâ â®¬ ¢ë§®¢ 
ï¥âáï ãáâ ­®¢ª  ¤ âë/¢à¥¬¥­¨ ¬®¤¨ä¨ª æ¨¨ ¨ ¤®áâ㯠 ¢ ⥪ã騥.
* …᫨ ᢮¡®¤­®£® ¬¥áâ  ­  ¤¨áª¥ ­¥¤®áâ â®ç­® ¤«ï à áè¨à¥­¨ï ä ©« ,
â® äã­ªæ¨ï à áè¨à¨â ­ áª®«ìª® ¢®§¬®¦­®, ¯®á«¥ 祣® ¢¥à­ñâ
ª®¤ ®è¨¡ª¨ 8.
* ”ã­ªæ¨ï ­¥ ¯®¤¤¥à¦¨¢ ¥âáï ¤«ï CD (¢¥à­ñâáï ª®¤ ®è¨¡ª¨ 2).
======================================================================
=== ”γ­<CEB3>ζ¨ο 70, ―®¤δγ­<CEB3>ζ¨ο 5 - ―®«γη¥­¨¥ ¨­δ®ΰ¬ ζ¨¨ ® δ ©«¥/― <C2A0>¥. ===

View File

@ -10,8 +10,8 @@ All registers except explicitly declared in the returned value,
============== Function 0 - define and draw the window. ==============
======================================================================
Defines an application window. Draws a frame of the window, header and
working area. For skinned windows defines standard buttons for close
and minimize.
working area. For skinned windows defines standard close and minimize
buttons.
Parameters:
* eax = 0 - function number
* ebx = [coordinate on axis x]*65536 + [size on axis x]
@ -111,7 +111,7 @@ Remarks:
rectangle with the left upper corner (5,_skinh) and right lower
(xsize-5,ysize-5) with color indicated in edx
(taking a gradient into account)
* define two standard buttons: for close and minimize
* define two standard buttons: close and minimize
(see function 8)
* if A=1 and edi contains (nonzero) pointer to caption string,
it is drawn in place in header defined in the skin
@ -982,6 +982,7 @@ Remarks:
movement of the mouse on 1 pixel is impossible and the cursor will
jump on the value of installed speed (subsubfunction 1). The
installed value is not inspected by the kernel code.
Mouse delay can be regulated through the application SETUP.
* The subsubfunction 4 does not check the passed value. Before
its call find out current screen resolution (with function 14)
and check that the value of position is inside the limits of the
@ -1824,6 +1825,8 @@ Parameters:
* ecx = [start coordinate on axis y]*65536 +
[end coordinate on axis y]
* edx = 0x00RRGGBB - color
edx = 0x01xxxxxx - draw inversed line
(low 24 bits are ignored)
Returned value:
* function does not return value
Remarks:
@ -2873,7 +2876,6 @@ Existing subfunctions:
* subfunction 0 - read file/folder
* subfunction 1 - rewrite file
* subfunction 2 - delete file/folder
* subfunction 3 - write to existing file
* subfunction 4 - make folder
* subfunction 5 - rename/move file/folder
* subfunction 8 - LBA-read from device
@ -2989,39 +2991,6 @@ Remarks:
correctly (i.e. recursively with all files and nested folders).
Function 58 does not support folders on ramdisk.
======================================================================
==== Function 58, subfunction 3 - write data to the existing file. ===
======================================================================
Parameters:
* eax = 58 - function number
* ebx = pointer to the information structure
Format of the information structure:
* +0: dword: 3 = subfunction number
* +4: dword: starting position in the file; -1 = append to the end
* +8: dword: number of bytes to write
* +12 = +0xC: dword: pointer to data to write
* +16 = +0x10: dword: pointer to buffer for system operations
(4096 bytes)
* +20 = +0x14: ASCIIZ-name of file, the rules of names forming are
given in the general description
Returned value:
* eax = 0 - success, otherwise file system error code
* ebx destroyed
Remarks:
* This function is obsolete, use subfunction 3 of function 70.
* Ramdisk and floppies do not support this function, it is only
for hard disks.
* File must already exist (otherwise function returns 5, not found).
To create files use subfunction 1.
* If the starting position is greater than file size, the function
returns eax=6(EOF). If the end position is greater than file size,
file is extended.
* The code of write processing for hard disk interpretes zero
value of the field +8 as the instruction to truncate the file to
the size, given in the field +4. However the code of processing
58th function blocks this possibility for applications by
immediate return (with eax=0) in the case of zero size.
======================================================================
============== Function 58, subfunction 4 - make folder. =============
======================================================================
@ -4100,6 +4069,7 @@ Available subfunctions:
* subfunction 1 - read folder
* subfunction 2 - create/rewrite file
* subfunction 3 - write to existing file
* subfunction 4 - set file size
* subfunction 5 - get attributes of file/folder
* subfunction 6 - set attributes of file/folder
* subfunction 7 - start application
@ -4287,6 +4257,38 @@ Remarks:
* If beginning and/or ending position is greater than file size
(except for the previous case), the file is expanded to needed
size with zero characters.
* The function is not supported for CD (returns error code 2).
======================================================================
============ Function 70, subfunction 4 - set end of file. ===========
======================================================================
Parameters:
* eax = 70 - function number
* ebx = pointer to the information structure
Format of the information structure:
* +0: dword: 4 = subfunction number
* +4: dword: low dword of new file size
* +8: dword: high dword of new file size (must be 0 for FAT)
* +12 = +0xC: dword: 0 (reserved)
* +16 = +0x10: dword: 0 (reserved)
* +20 = +0x14: ASCIIZ-name of file, the rules of names forming are
given in the general description
or
* +20 = +0x14: db 0
* +21 = +0x15: dd pointer to ASCIIZ-string with file name
Returned value:
* eax = 0 - success, otherwise file system error code
* ebx destroyed
Remarks:
* If the new file size is less than old one, file is truncated.
If the new size is greater than old one, file is expanded with
characters with code 0. If the new size is equal to old one,
the only result of call is set date/time of modification and
access to the current date/time.
* If there is not enough free space on disk for expansion, the
function will expand to maximum possible size and then return
error code 8.
* The function is not supported for CD (returns error code 2).
======================================================================
==== Function 70, subfunction 5 - get information on file/folder. ====

View File

@ -49,7 +49,7 @@ floppy_free_space:
call read_flp_fat
cmp [FDC_Status],0
jne fdc_status_error_2
mov eax,0x282000
mov eax,0x282004
xor edi,edi
mov ecx,2847 ;1448000/512
rdfs1_1:
@ -1828,8 +1828,7 @@ fs_FloppyRewrite:
call dword [eax+12] ; flush directory
push ecx
push edi
add edi, 26 ; edi points to low word of cluster
push edi
push 0
mov esi, edx
jecxz .done
mov ecx, 2849
@ -1846,15 +1845,15 @@ fs_FloppyRewrite:
lea eax, [edi-0x282000]
shr eax, 1 ; eax = cluster
mov word [edi], 0xFFF ; mark as last cluster
xchg edi, [esp+4]
cmp dword [esp], 0
jz .first
xchg edi, [esp+4]
stosw
mov edi, [esp+4]
jmp @f
.first:
mov [esp], eax
@@:
mov edi, [esp+4]
inc ecx
; write data
push ecx edi
@ -2133,7 +2132,7 @@ floppy_extend_file.zero_size:
; extends file on floppy to given size (new data area is undefined)
; in: edi->direntry, ecx=new size
; out: CF=0 => OK, eax destroyed
; out: CF=0 => OK, eax=0
; CF=1 => error, eax=code (ERROR_FAT_TABLE or ERROR_DISK_FULL)
floppy_extend_file:
push ecx
@ -2208,7 +2207,7 @@ floppy_extend_file:
.extend_done:
mov [edi+28], ecx
pop esi edx
clc
xor eax, eax ; CF=0
ret
.disk_full:
pop edi ecx
@ -2218,6 +2217,213 @@ floppy_extend_file:
pop eax
ret
;----------------------------------------------------------------
;
; fs_FloppySetFileEnd - set end of file on floppy
;
; esi points to filename
; ebx points to 64-bit number = new file size
; ecx ignored (reserved)
; edx ignored (reserved)
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
fs_FloppySetFileEnd:
call read_flp_fat
cmp [FDC_Status], 0
jnz ret11
cmp byte [esi], 0
jnz @f
.access_denied:
push ERROR_ACCESS_DENIED
jmp .ret
@@:
push edi
call fd_find_lfn
jnc @f
pop edi
push ERROR_FILE_NOT_FOUND
.ret:
pop eax
jmp .doret
@@:
; must not be directory
test byte [edi+11], 10h
jz @f
pop edi
jmp .access_denied
@@:
; file size must not exceed 4 Gb
cmp dword [ebx+4], 0
jz @f
pop edi
push ERROR_END_OF_FILE
jmp .ret
@@:
push eax
; set file modification date/time to current
call fat_update_datetime
mov eax, [ebx]
cmp eax, [edi+28]
jb .truncate
ja .expand
pop eax
pushad
call save_chs_sector
popad
pop edi
xor eax, eax
cmp [FDC_Status], 0
jz @f
mov al, 11
@@:
.doret:
mov [fdc_irq_func], fdc_null
ret
.expand:
push ecx
push dword [edi+28] ; save old size
mov ecx, eax
call floppy_extend_file
push eax ; return code
jnc .expand_ok
cmp al, ERROR_DISK_FULL
jz .disk_full
pop eax ecx ecx edi edi
jmp .doret
.device_err:
pop eax
.device_err2:
pop ecx ecx eax edi
push 11
jmp .ret
.disk_full:
.expand_ok:
; save directory & FAT
mov eax, [edi+28]
xchg eax, [esp+12]
movzx edi, word [edi+26]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jnz .device_err
call save_flp_fat
cmp [FDC_Status], 0
jnz .device_err
call SetUserInterrupts
; now zero new data
; edi = current cluster, [esp+12]=new size, [esp+4]=old size, [esp]=return code
.zero_loop:
sub dword [esp+4], 0x200
jae .next_cluster
cmp dword [esp+4], -0x200
jz .noread
lea eax, [edi+31]
pusha
call read_chs_sector
popa
cmp [FDC_Status], 0
jnz .err_next
.noread:
mov ecx, [esp+4]
neg ecx
push edi
mov edi, 0xD000+0x200
add edi, [esp+8]
xor eax, eax
mov [esp+8], eax
rep stosb
pop edi
lea eax, [edi+31]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jz .next_cluster
.err_next:
mov byte [esp], 11
.next_cluster:
sub dword [esp+12], 0x200
jbe .expand_done
movzx edi, word [0x282000+edi*2]
jmp .zero_loop
.expand_done:
pop eax ecx ecx edi edi
jmp .doret
.truncate:
mov [edi+28], eax
push ecx
movzx ecx, word [edi+26]
test eax, eax
jz .zero_size
; find new last sector
@@:
sub eax, 0x200
jbe @f
movzx ecx, word [0x282000+ecx*2]
jmp @b
@@:
; we will zero data at the end of last sector - remember it
push ecx
; terminate FAT chain
lea ecx, [0x282000+ecx+ecx]
push dword [ecx]
mov word [ecx], 0xFFF
pop ecx
and ecx, 0xFFF
jmp .delete
.zero_size:
and word [edi+26], 0
push 0
.delete:
; delete FAT chain starting with ecx
; mark all clusters as free
cmp ecx, 0xFF8
jae .deleted
lea ecx, [0x282000+ecx+ecx]
push dword [ecx]
and word [ecx], 0
pop ecx
and ecx, 0xFFF
jmp .delete
.deleted:
mov edi, [edi+28]
; save directory & FAT
mov eax, [esp+8]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jnz .device_err2
call save_flp_fat
cmp [FDC_Status], 0
jnz .device_err2
; zero last sector, ignore errors
pop eax
add eax, 31
and edi, 0x1FF
jz .truncate_done
call SetUserInterrupts
pusha
call read_chs_sector
popa
add edi, 0xD000
mov ecx, 0xD000+0x200
sub ecx, edi
push eax
xor eax, eax
rep stosb
pop eax
pusha
call save_chs_sector
popa
.truncate_done:
pop ecx eax edi
xor eax, eax
jmp .doret
fs_FloppyGetFileInfo:
call read_flp_fat
cmp [FDC_Status], 0

View File

@ -90,6 +90,7 @@ uglobal
Sector512: ; label for dev_hdcd.inc
buffer: times 512 db 0
deltree_buffer: times 512 db 0
fsinfo_buffer: times 512 db 0
endg
iglobal
@ -1037,7 +1038,7 @@ add_disk_free_space:
push eax ebx
mov eax,[ADR_FSINFO]
mov ebx,buffer
mov ebx,fsinfo_buffer
call hd_read
cmp [hd_error],0
jne add_not_fs
@ -1047,8 +1048,8 @@ add_disk_free_space:
add [ebx+0x1e8],ecx
call hd_write
cmp [hd_error],0
jne add_not_fs
; cmp [hd_error],0
; jne add_not_fs
add_not_fs:
pop ebx eax
@ -1057,368 +1058,6 @@ add_disk_free_space:
ret
file_append:
;-----------------------------------------------------
; input : eax = file name
; edx = path
; ecx = pointer to buffer
; ebx = bytes to write (0 = truncate file)
; esi = start position (-1 = end of file)
; output : eax = 0 - ok
; 3 - unknown FS
; 5 - file not found
; 6 - end of file
; 8 - disk full
; 9 - fat table corrupted
; 10 - access denied
; ebx = bytes written
;-----------------------------------------------------
cmp [fat_type],0
jnz append_fat_ok
mov eax,ERROR_UNKNOWN_FS
ret
append_fat_ok:
; call reserve_hd1
pushad
mov ebx,edx
call get_cluster_of_a_path
jc append_not_found
mov ebx,PUSHAD_EAX ; file name
call analyze_directory
jc append_not_found
mov [sector_tmp],eax
mov [entry_pos],ebx
test byte [ebx+11],0x10 ; is it directory?
jnz append_access ; yes
mov ecx,[ebx+28] ; file size
mov edi,PUSHAD_ESI ; write position
cmp edi,-1 ; -1 = eof
jnz append_inside_file
mov edi,ecx ; file size
append_inside_file:
cmp edi,ecx ; start above old file size?
ja append_eof ; yes
mov [old_filesize],ecx
mov [new_filepos],edi
mov ecx,PUSHAD_EBX ; bytes to write
test ecx,ecx ; truncate?
jz append_truncate ; yes
mov [bytes2write],ecx ; bytes to write
mov esi,PUSHAD_ECX ; pointer to buffer
mov eax,[ebx+20-2] ; FAT entry
mov ax,[ebx+26]
and eax,[fatMASK]
jnz append_find_pos ; first cluster <> 0
mov eax,2
call get_free_FAT
jc append_disk_full
mov ecx,eax ; set files first cluster
mov [ebx+26],cx ; 16 bits low of cluster
shr ecx,16
mov [ebx+20],cx ; 16 bits high of cluster (=0 fat16)
mov edx,[fatEND] ; new end for cluster chain
call set_FAT
cmp [hd_error],0
jne append_access
push eax ; save first cluster
mov eax,[sector_tmp]
mov ebx,buffer
call hd_write ; write new file entry back to disk
cmp [hd_error],0
jne append_access_1
pop eax
append_remove_free:
mov ecx,-1 ; remove 1 cluster from free disk space
call add_disk_free_space ; Note: uses buffer
cmp [hd_error],0
jne append_access
append_found_cluster:
mov [cluster],eax
sub eax,2
mov ecx,[SECTORS_PER_CLUSTER]
imul eax,ecx
add eax,[DATA_START]
xor edi,edi
append_new_sector:
cmp [hd_error],0
jne append_access
push ecx
mov ecx,[bytes2write] ; bytes left in buffer
mov ebx,512
sub ebx,edi ; bytes left in sector
cmp ecx,ebx
jb append_bytes_ok
mov ecx,ebx
append_bytes_ok:
cmp ecx,512 ; overwrite full sector?
jz append_full_sector ; yes
mov ebx,buffer ; overwrite part of sector
call hd_read ; read old sector
cmp [hd_error],0
jne append_access_1
append_full_sector:
sub [bytes2write],ecx
add [new_filepos],ecx
add edi,buffer
cld
rep movsb
pop ecx
mov ebx,buffer
call hd_write
cmp [hd_error],0
jne append_access
cmp [bytes2write],0 ; is all done?
jz append_done
xor edi,edi
inc eax
dec ecx
jnz append_new_sector
mov eax,[cluster]
call get_FAT
cmp [hd_error],0
jne append_access
cmp eax,2
jb append_fat
cmp eax,[LAST_CLUSTER]
jbe append_found_cluster
append_alloc_cluster:
mov eax,2 ; ToDo: use temp array to keep track
call get_free_FAT ; of last free cluster
jc append_disk_full
push eax ; save new cluster
mov edx,[fatEND] ; new end for cluster chain
call set_FAT
cmp [hd_error],0
jne append_access_1
mov edx,eax
mov eax,[cluster]
call set_FAT ; update previous cluster
cmp [hd_error],0
jne append_access_1
pop eax
jmp append_remove_free
append_find_pos:
call find_filepos
mov [cluster],ebx
jnc append_new_sector
test edi,edi
jz append_alloc_cluster
append_fat:
mov eax,ERROR_FAT_TABLE
jmp append_ret_code
append_disk_full:
cmp [hd_error],0
jne append_access
mov eax,ERROR_DISK_FULL
jmp append_ret_code
append_done:
xor eax,eax
append_ret_code:
mov PUSHAD_EAX,eax ; return code
mov eax,[sector_tmp] ; update directory entry
mov ebx,buffer
call hd_read
cmp [hd_error],0
jne append_access
mov ebx,[entry_pos]
mov ecx,[new_filepos]
cmp ecx,[old_filesize] ; is file pos above old size?
jbe append_size_ok ; no
mov [ebx+28],ecx ; new file size
append_size_ok:
call set_current_time_for_entry
mov ebx,buffer
call hd_write ; write new file entry back to disk
cmp [hd_error],0
jne append_access
sub ecx,PUSHAD_ESI ; start position
mov PUSHAD_EBX,ecx ; bytes written
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne append_access_2
mov [hd1_status],0
ret
append_eof:
popad
mov [hd1_status],0
xor ebx,ebx
mov eax,ERROR_END_OF_FILE
ret
append_not_found:
cmp [hd_error],0
jne append_access
popad
mov [hd1_status],0
xor ebx,ebx
mov eax,ERROR_FILE_NOT_FOUND
ret
append_access_1:
add esp,4
append_access:
popad
append_access_2:
mov [hd1_status],0
xor ebx,ebx
mov eax,ERROR_ACCESS_DENIED
ret
append_truncate:
mov edx,[ebx+20-2] ; FAT entry
mov dx,[ebx+26]
and edx,[fatMASK]
mov [ebx+28],edi ; set new file size
test edi,edi ; 0 length file?
jnz truncate_save_size ; no
mov [ebx+20],di ; FAT entry = 0
mov [ebx+26],di
truncate_save_size:
call set_current_time_for_entry
mov ebx,buffer
call hd_write
cmp [hd_error],0
jne append_access
mov eax,edx ; first cluster
test edi,edi ; 0 length file?
jz truncate_clear_chain
imul esi,[SECTORS_PER_CLUSTER],512 ; esi = cluster size in bytes
truncate_new_cluster:
cmp eax,2 ; incorrect fat chain?
jb truncate_eof ; yes
cmp eax,[fatRESERVED] ; is it end of file?
jnb truncate_eof ; yes
sub edi,esi
jbe truncate_pos_found
call get_FAT ; get next cluster
cmp [hd_error],0
jne append_access
jmp truncate_new_cluster
truncate_pos_found:
mov edx,[fatEND] ; new end for cluster chain
call set_FAT
cmp [hd_error],0
jne append_access
mov eax,edx ; clear rest of chain
truncate_clear_chain:
call clear_cluster_chain
cmp [hd_error],0
jne append_access
truncate_eof:
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne append_access_2
mov [hd1_status],0
xor ebx,ebx
xor eax,eax
ret
find_filepos:
;-----------------------------------------------------
; input : eax = first cluster
; edi = bytes to skip over (start position)
; output : if CARRY=0 file position found
; if CARRY=1 end of file found
; eax = current file sector
; ebx = last cluster
; ecx = sector count in last cluster
; edi = bytes to skip over (sector position)
;-----------------------------------------------------
push esi
mov ecx,[SECTORS_PER_CLUSTER]
imul esi,ecx,512 ; esi = cluster size in bytes
mov ebx,eax
filepos_new_cluster:
cmp eax,2 ; incorrect fat chain?
jb filepos_eof ; yes
cmp eax,[fatRESERVED] ; is it end of file?
jnb filepos_eof ; yes
mov ebx,eax
cmp edi,esi ; skip over full cluster?
jb filepos_cluster_ok ; no
sub edi,esi
call get_FAT ; get next cluster
cmp [hd_error],0
jne filepos_eof
jmp filepos_new_cluster
filepos_cluster_ok:
sub eax,2
imul eax,ecx
add eax,[DATA_START]
filepos_new_sector:
cmp edi,512 ; skip over full sector?
jb filepos_sector_ok ; no
sub edi,512
inc eax
dec ecx
jnz filepos_new_sector
filepos_eof:
pop esi
stc
ret
filepos_sector_ok:
pop esi
clc
ret
file_write:
;--------------------------------------------------------------------------
; INPUT : user-reg register-in-this meaning symbol-in-this-routine
@ -3994,7 +3633,7 @@ hd_extend_file.zero_size:
; extends file on hd to given size (new data area is undefined)
; in: edi->direntry, ecx=new size
; out: CF=0 => OK, eax destroyed
; out: CF=0 => OK, eax=0
; CF=1 => error, eax=code (ERROR_FAT_TABLE or ERROR_DISK_FULL or 11)
hd_extend_file:
push ebp
@ -4072,6 +3711,10 @@ hd_extend_file:
ror edx, 16
mov [edi+26], dx
@@:
push ecx
mov ecx, -1
call add_disk_free_space
pop ecx
mov eax, edx
cmp [hd_error], 0
jnz .device_err3
@ -4080,7 +3723,7 @@ hd_extend_file:
.extend_done:
mov [edi+28], ecx
pop edx ebp
clc
xor eax, eax ; CF=0
ret
.device_err3:
pop edx
@ -4095,6 +3738,246 @@ hd_extend_file:
@@: stc
ret
;----------------------------------------------------------------
;
; fs_HdSetFileEnd - set end of file on hard disk
;
; esi points to filename
; ebx points to 64-bit number = new file size
; ecx ignored (reserved)
; edx ignored (reserved)
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
fs_HdSetFileEnd:
cmp [fat_type], 0
jnz @f
push ERROR_UNKNOWN_FS
.ret:
pop eax
ret
@@:
cmp byte [esi], 0
jnz @f
.access_denied:
push ERROR_ACCESS_DENIED
jmp .ret
@@:
push edi
call hd_find_lfn
pushfd
cmp [hd_error], 0
jz @f
popfd
push 11
jmp .ret
@@:
popfd
jnc @f
pop edi
push ERROR_FILE_NOT_FOUND
jmp .ret
@@:
; must not be directory
test byte [edi+11], 10h
jz @f
pop edi
jmp .access_denied
@@:
; file size must not exceed 4 Gb
cmp dword [ebx+4], 0
jz @f
pop edi
push ERROR_END_OF_FILE
jmp .ret
@@:
push eax ; save directory sector
; set file modification date/time to current
call fat_update_datetime
mov eax, [ebx]
cmp eax, [edi+28]
jb .truncate
ja .expand
pop eax
mov ebx, buffer
call hd_write
pop edi
xor eax, eax
cmp [hd_error], 0
jz @f
mov al, 11
@@:
ret
.expand:
push ebx ebp ecx
push dword [edi+28] ; save old size
mov ecx, eax
call hd_extend_file
push eax ; return code
jnc .expand_ok
cmp al, ERROR_DISK_FULL
jz .disk_full
.pop_ret:
call update_disk
pop eax ecx ebp ebx ecx edi edi
ret
.expand_ok:
.disk_full:
; save directory
mov eax, [edi+28]
xchg eax, [esp+20]
mov ebx, buffer
call hd_write
mov eax, [edi+20-2]
mov ax, [edi+26]
mov edi, eax
cmp [hd_error], 0
jz @f
.pop_ret11:
mov byte [esp], 11
jmp .pop_ret
@@:
; now zero new data
xor ebp, ebp
; edi=current cluster, ebp=sector in cluster
; [esp+20]=new size, [esp+4]=old size, [esp]=return code
.zero_loop:
sub dword [esp+4], 0x200
jae .next_cluster
lea eax, [edi-2]
imul eax, [SECTORS_PER_CLUSTER]
add eax, [DATA_START]
add eax, ebp
cmp dword [esp+4], -0x200
jz .noread
mov ebx, buffer
call hd_read
cmp [hd_error], 0
jnz .err_next
.noread:
mov ecx, [esp+4]
neg ecx
push edi
mov edi, buffer+0x200
add edi, [esp+8]
push eax
xor eax, eax
mov [esp+12], eax
rep stosb
pop eax
pop edi
call hd_write
cmp [hd_error], 0
jz .next_cluster
.err_next:
mov byte [esp], 11
.next_cluster:
sub dword [esp+20], 0x200
jbe .pop_ret
inc ebp
cmp ebp, [SECTORS_PER_CLUSTER]
jb .zero_loop
xor ebp, ebp
mov eax, edi
call get_FAT
mov edi, eax
cmp [hd_error], 0
jnz .pop_ret11
jmp .zero_loop
.truncate:
mov [edi+28], eax
push ecx
mov ecx, [edi+20-2]
mov cx, [edi+26]
push eax
test eax, eax
jz .zero_size
; find new last cluster
@@:
mov eax, [SECTORS_PER_CLUSTER]
shl eax, 9
sub [esp], eax
jbe @f
mov eax, ecx
call get_FAT
mov ecx, eax
cmp [hd_error], 0
jz @b
.device_err3:
pop eax ecx eax edi
push 11
pop eax
ret
@@:
; we will zero data at the end of last sector - remember it
push ecx
; terminate FAT chain
push edx
mov eax, ecx
mov edx, [fatEND]
call set_FAT
mov eax, edx
pop edx
cmp [hd_error], 0
jz @f
.device_err4:
pop ecx
jmp .device_err3
.zero_size:
and word [edi+20], 0
and word [edi+26], 0
push 0
mov eax, ecx
@@:
; delete FAT chain
call clear_cluster_chain
cmp [hd_error], 0
jnz .device_err4
; save directory
mov eax, [esp+12]
push ebx
mov ebx, buffer
call hd_write
pop ebx
cmp [hd_error], 0
jnz .device_err4
; zero last sector, ignore errors
pop ecx
pop eax
dec ecx
imul ecx, [SECTORS_PER_CLUSTER]
add ecx, [DATA_START]
push eax
sar eax, 9
add ecx, eax
pop eax
and eax, 0x1FF
jz .truncate_done
push ebx eax
mov eax, ecx
mov ebx, buffer
call hd_read
pop eax
lea edi, [buffer+eax]
push ecx
mov ecx, 0x200
sub ecx, eax
xor eax, eax
rep stosb
pop eax
call hd_write
pop ebx
.truncate_done:
pop ecx eax edi
call update_disk
xor eax, eax
cmp [hd_error], 0
jz @f
mov al, 11
@@:
ret
fs_HdGetFileInfo:
cmp [fat_type], 0
jnz @f

View File

@ -35,10 +35,9 @@ file_system:
; IN:
;
; eax = 0 ; read file /RamDisk/First 6 /HardDisk/First 30
; eax = 0 ; read file /RamDisk/First 6
; eax = 1 ; write file /RamDisk/First 33 /HardDisk/First 56
; eax = 2 ; delete file /RamDisk/First 32 /HardDisk/First 57
; eax = 3 ; append to a file /RamDisk/First ?? /HardDisk/First ??
; eax = 2 ; delete file /RamDisk/First 32
; eax = 4 ; makedir
; eax = 5 ; rename file/directory
; eax = 8 ; lba read
@ -103,10 +102,7 @@ file_system:
jz no_checks_for_kernel
mov edx,eax
cmp dword [eax+0],1
jz .check_for_write_op
cmp dword [eax+0],3
jnz .usual_check
.check_for_write_op:
mov ebx,[eax+12]
add ebx,std_application_base_address
mov ecx,[eax+8]
@ -139,13 +135,6 @@ endg
mov eax,edx
no_checks_for_kernel:
cmp dword [eax+0],3 ; APPEND - allow write 0 bytes (truncate)
je fs_read
cmp dword [eax+8],0 ; read or write 0 blocks/bytes ?
jne fs_read
and dword [esp+36],0
ret
fs_read:
mov ebx,[eax+20] ; program wants root directory ?
@ -602,27 +591,6 @@ hd_err_return:
fs_noharddisk_delete:
cmp dword [esp+20],3 ; APPEND
jne fs_noharddisk_append
mov eax,[esp+0] ; /dirname or /filename
mov byte [eax],0 ; path to asciiz
inc eax ; filename start
mov edx,[esp+4]
add edx,12*2 ; path start
mov ecx,[esp+8] ; buffer
mov ebx,[esp+12] ; count to write
mov esi,[esp+16] ; bytes to skip over
call file_append
mov edi,[esp+0]
mov byte [edi],'/'
jmp file_system_return
fs_noharddisk_append:
cmp dword [esp+20],4 ; MAKEDIR
jne fs_noharddisk_makedir

View File

@ -77,8 +77,8 @@ file_system_lfn:
; 0 : read file
; 1 : read folder
; 2 : create/rewrite file
; 3 : write/append to file - not implemented yet
; 4 : set end of file - not implemented yet
; 3 : write/append to file
; 4 : set end of file
; 5 : get file/directory attributes structure
; 6 : set file/directory attributes structure
; 7 : start application
@ -348,7 +348,7 @@ fs_RamdiskServices:
dd fs_RamdiskReadFolder
dd fs_RamdiskRewrite
dd fs_RamdiskWrite
dd fs_NotImplemented
dd fs_RamdiskSetFileEnd
dd fs_RamdiskGetFileInfo
dd fs_RamdiskSetFileInfo
dd fs_RamdiskExecute
@ -377,7 +377,7 @@ fs_FloppyServices:
dd fs_FloppyReadFolder
dd fs_FloppyRewrite
dd fs_FloppyWrite
dd fs_NotImplemented
dd fs_FloppySetFileEnd
dd fs_FloppyGetFileInfo
dd fs_FloppySetFileInfo
dd fs_FloppyExecute
@ -448,7 +448,7 @@ fs_HdServices:
dd fs_HdReadFolder
dd fs_HdRewrite
dd fs_HdWrite
dd fs_NotImplemented
dd fs_HdSetFileEnd
dd fs_HdGetFileInfo
dd fs_HdSetFileInfo
dd fs_HdExecute
@ -484,12 +484,12 @@ fs_OnCd:
mov [hdpos], eax
cmp ecx, 0x100
jae .nf
push cx bx
push ecx ebx
mov cl,al
mov bl,[0x40001]
shr bl,cl
test bl,2
pop bx cx
pop ebx ecx
jnz @f
.nf:

View File

@ -127,6 +127,10 @@ vesa20_putimage:
; real_sx = MIN(wnd_sx-image_cx, image_sx);
mov ebx, [eax-twdw + WDATA.box.width] ; ebx = wnd_sx
; \begin{diamond}[20.08.2006]
; note that WDATA.box.width is one pixel less than real window x-size
inc ebx
; \end{diamond}[20.08.2006]
sub ebx, [putimg.image_cx]
ja @f
add esp, putimg.stack_data
@ -136,13 +140,14 @@ vesa20_putimage:
cmp ebx, [putimg.image_sx]
jbe .end_x
mov ebx, [putimg.image_sx]
dec ebx
.end_x:
inc ebx
mov [putimg.real_sx], ebx
; init real_sy
mov ebx, [eax-twdw + WDATA.box.height] ; ebx = wnd_sy
; \begin{diamond}[20.08.2006]
inc ebx
; \end{diamond}[20.08.2006]
sub ebx, [putimg.image_cy]
ja @f
add esp, putimg.stack_data
@ -152,9 +157,7 @@ vesa20_putimage:
cmp ebx, [putimg.image_sy]
jbe .end_y
mov ebx, [putimg.image_sy]
dec ebx
.end_y:
inc ebx
mov [putimg.real_sy], ebx
; line increment
@ -611,6 +614,10 @@ vesa20_drawbar:
; real_sx = MIN(wnd_sx-bar_cx, bar_sx);
mov ebx, [edi-twdw + WDATA.box.width] ; ebx = wnd_sx
; \begin{diamond}[20.08.2006]
; note that WDATA.box.width is one pixel less than real window x-size
inc ebx
; \end{diamond}[20.08.2006]
sub ebx, [drbar.bar_cx]
ja @f
.exit: ;// mike.dld, 2005-01-29
@ -629,6 +636,9 @@ vesa20_drawbar:
; real_sy = MIN(wnd_sy-bar_cy, bar_sy);
mov ebx, [edi-twdw + WDATA.box.height] ; ebx = wnd_sy
; \begin{diamond}[20.08.2006]
inc ebx
; \end{diamond}
sub ebx, [drbar.bar_cy]
ja @f
add esp, drbar.stack_data

View File

@ -20,7 +20,7 @@ use32
db "MENUET01"
dd 0x01
dd ENTRANCE
dd EYES_END
dd I_END
dd 0x3000
dd 0x3000
dd 0x0
@ -30,280 +30,9 @@ include 'macros.inc'
ENTRANCE: ; start of code
; ==== main ====
call prepare_eyes
call shape_window
still:
call draw_eyes ; draw those funny "eyes"
mov eax,23 ; wait for event with timeout
mov ebx,TIMEOUT
int 0x40
cmp eax,1 ; redraw ?
jnz no_draw
call redraw_overlap
no_draw:
cmp eax,2 ; key ?
jz key
cmp eax,3 ; button ?
jz button
jmp still ; loop
; EVENTS
key:
mov eax,2 ; just read and ignore
int 0x40
jmp still
button: ; analyze button
mov eax,-1 ; this is button 1 - we have only one button :-)
int 0x40
jmp still
; -====- declarations -====-
imagedata equ EYES_END
skindata equ EYES_END+925
winref equ EYES_END+6325
; -====- shape -====-
shape_window:
mov eax,50 ; set up shape reference area
mov ebx,0
mov ecx,winref
int 0x40
ret
; -====- redrawing -====-
draw_eyes: ; check mousepos to disable blinking
mov eax,37
xor ebx,ebx
int 0x40
cmp dword [mouse],eax
jne redraw_ok
ret
redraw_ok:
mov [mouse],eax
redraw_overlap: ; label for redraw event (without checkmouse)
mov eax,12
mov ebx,1
int 0x40
xor eax,eax ; define window
mov ebx,[win_ebx]
mov ecx,[win_ecx]
xor edx,edx
xor esi,esi
xor edi,edi
int 0x40
mov eax,8 ; define closebutton
mov ebx,60
mov ecx,45
mov edx,1
int 0x40
mov eax,7
mov ebx,skindata
mov ecx,60*65536+30
mov edx,15
int 0x40
mov eax,15
mov ebx,30
call draw_eye_point
add eax,30
call draw_eye_point
mov eax,12
mov ebx,2
int 0x40
ret
draw_eye_point: ; draw eye point (EAX=X, EBX=Y)
pusha
mov ecx, [mouse] ; ecx = mousex, edx = mousey
mov edx,ecx
shr ecx,16
and edx,0xFFFF
; ===> calculate position
push eax
push ebx
mov byte [sign1],0
mov esi, [win_ebx]
shr esi,16
add eax,esi
sub ecx,eax ; ECX=ECX-EAX (signed) , ECX=|ECX|
jnc abs_ok_1
neg ecx
mov byte [sign1],1
abs_ok_1:
mov [temp1],ecx
mov byte [sign2],0
mov esi,[win_ecx]
shr esi,16
add ebx,esi
sub edx,ebx ; EDX=EDX-EBX (signed) , EDX=|EDX|
jnc abs_ok_2
neg edx
mov byte [sign2],1
abs_ok_2:
mov [temp2],edx
pop ebx
pop eax
push eax ; ECX*=ECX
push edx
xor eax,eax
xor edx,edx
mov ax,cx
mul cx
shl edx,16
or eax,edx
mov ecx,eax
pop edx
pop eax
push eax ; EDX*=EDX
push ecx
mov ecx,edx
xor eax,eax
xor edx,edx
mov ax,cx
mul cx
shl edx,16
or eax,edx
mov edx,eax
pop ecx
pop eax
push ebx
push ecx
push edx
push eax
mov ebx,ecx ; EBX=ECX+EDX
add ebx,edx
xor edi,edi ; ESI=SQRT(EBX)
mov ecx,edi
mov edx,edi
inc edi
mov eax,edi
inc edi
sqrt_loop:
add ecx,eax
add eax,edi
inc edx
cmp ecx,ebx
jbe sqrt_loop
dec edx
mov esi,edx
mov ax,si ; ESI=ESI/7
mov dl,7
div dl
and ax,0xFF
mov si,ax ; ESI ? 0 : ESI=1
jnz nozeroflag1
mov si,1
nozeroflag1:
pop eax
pop edx
pop ecx
pop ebx
push eax ; ECX=[temp1]/ESI
push edx
mov eax,[temp1]
mov dx,si
div dl
mov cl,al
and ecx,0xFF
pop edx
pop eax
cmp byte [sign1],1
je subtract_1
add eax,ecx ; EAX=EAX+ECX
jmp calc_ok_1
subtract_1:
sub eax,ecx ; EAX=EAX-ECX
calc_ok_1:
push eax ; EDX=[temp2]/ESI
push ecx
mov eax,[temp2]
mov dx,si
div dl
mov dl,al
and dx,0xFF
pop ecx
pop eax
cmp byte [sign2],1
je subtract_2
add ebx,edx ; EBX=EBX+EDX
jmp calc_ok_2
subtract_2:
sub ebx,edx ; EBX=EBX-EDX
calc_ok_2:
; <===
mov ecx,ebx ; draw point
mov ebx,eax
mov eax,13
dec ecx
dec ecx
dec ebx
dec ebx
shl ecx,16
add ecx,4
shl ebx,16
add ebx,4
mov eax,13
xor edx,edx
int 0x40
popa
ret
; -====- working on images and window -====-
prepare_eyes:
;mov eax,6 ; load EYES.RAW
;mov ebx,graphix
;mov ecx,0x00000000
;mov edx,0xFFFFFFFF
;mov esi,imagedata
;int 0x40
;cmp eax,0xFFFFFFFF
;jnz filefound
;mov eax,-1 ; file not exists...
;int 0x40
;filefound:
mov esi,imagedata+25 ; transform grayscale to putimage format
mov esi,imagedata ; transform grayscale to putimage format
mov edi,skindata
mov ecx,30
transform_loop:
@ -334,7 +63,7 @@ sub eax,30*65536
mov [win_ebx],eax
mov [win_ecx],dword 10*65536+44
mov esi,imagedata+25 ; calculate shape reference area
mov esi,imagedata ; calculate shape reference area
mov edi,winref
mov ecx,900 ; disable drag bar
mov al,0
@ -351,19 +80,203 @@ call copy_line
pop ecx
loop shape_loop
; -====- shape -====-
shape_window:
mov eax,50 ; set up shape reference area
xor ebx,ebx
mov ecx,winref
int 0x40
call draw_window
still:
call draw_eyes ; draw those funny "eyes"
_wait:
mov eax,23 ; wait for event with timeout
mov ebx,TIMEOUT
int 0x40
dec eax
jz redraw
dec eax
jz key
dec eax
jnz still
button:
or eax, -1
int 0x40
key:
mov al, 2
int 0x40
jmp still
redraw:
call draw_window
call redraw_eyes
jmp _wait
; -====- redrawing -====-
draw_eyes: ; check mousepos to disable blinking
mov eax,37
xor ebx,ebx
int 0x40
cmp dword [mouse],eax
jne redraw_ok
ret
redraw_ok:
mov [mouse],eax
redraw_eyes:
mov eax,7
mov ebx,skindata
mov ecx,60*65536+30
mov edx,15
int 0x40
mov eax,15
mov ebx,30
call draw_eye_point
add eax,30
call draw_eye_point
ret
draw_window:
mov eax,12
mov ebx,1
int 0x40
xor eax,eax ; define window
mov ebx,[win_ebx]
mov ecx,[win_ecx]
xor edx,edx
xor esi,esi
xor edi,edi
int 0x40
mov eax,8 ; define closebutton
mov ebx,60
mov ecx,45
mov edx,1
int 0x40
mov eax,12
mov ebx,2
int 0x40
ret
draw_eye_point: ; draw eye point (EAX=X, EBX=Y)
pusha
movzx ecx, word [mouse+2] ; ecx = mousex, esi = mousey
movzx esi, word [mouse]
; ===> calculate position
push eax
push ebx
mov byte [sign1],0
mov edx, [win_ebx]
shr edx,16
add eax,edx
sub ecx,eax ; ECX=ECX-EAX (signed) , ECX=|ECX|
jnc abs_ok_1
neg ecx
mov byte [sign1],1
abs_ok_1:
push ecx ; save x distance
mov byte [sign2],0
mov edx,[win_ecx]
shr edx,16
add ebx,edx
sub esi,ebx ; EDX=EDX-EBX (signed) , EDX=|EDX|
jnc abs_ok_2
neg esi
mov byte [sign2],1
abs_ok_2:
mov [temp2],esi
; ESI = ECX*ECX+ESI*ESI
imul ecx, ecx
imul esi, esi
add esi, ecx
xor ecx,ecx ; EDX=SQRT(EBX)
xor edx,edx
mov eax,1
sqrt_loop:
; in this moment ecx=edx*edx, eax=1+2*edx
add ecx,eax
inc eax
inc eax
inc edx
cmp ecx,esi
jbe sqrt_loop
dec edx
mov eax,edx ; EDX=EDX/7
mov dl,7
div dl
and eax,0xFF
mov edx,eax ; EDX ? 0 : EDX=1
jnz nozeroflag1
inc edx
nozeroflag1:
pop eax ; EAX = x distance
; ECX=EAX/EDX
div dl
movzx ecx,al
pop ebx
pop eax
cmp byte [sign1], 0
jz @f
neg ecx
@@:
add eax, ecx
push eax ; ESI=[temp2]/EDX
mov eax,[temp2]
div dl
movzx esi,al
pop eax
cmp byte [sign2], 0
jz @f
neg esi
@@:
add ebx, esi
; <===
; draw point
lea ecx, [ebx-2]
lea ebx, [eax-2]
shl ecx,16
add ecx,4
shl ebx,16
add ebx,4
mov eax,13
xor edx,edx
int 0x40
popa
ret
; -====- working on images and window -====-
copy_line: ; copy single line to shape reference area
mov ecx,30
cpl_loop:
lodsb
cmp al,0xFF
jnz set_one
mov al,0
jmp cpl_ok
set_one:
mov al,1
cpl_ok:
; input is image: 0xFF = white pixel, 0 = black pixel
; output is membership boolean: 0 = pixel no, 1 = pixel ok
inc eax
stosb
loop cpl_loop
ret
@ -375,14 +288,19 @@ ret
win_ebx dd 0x0
win_ecx dd 0x0
mouse dd 0xFFFFFFFF
;graphix db "EYES.RAW "
EYES_END: ; end of code
imagedata:
; texture is 900 bytes starting from 25th
file "eyes.raw":25,900
I_END:
; temporary storage for math routines
temp1 dd 0
temp2 dd 0
sign1 db 0
sign2 db 0
sign1 db ?
sign2 db ?
align 4
temp2 dd ?
EYES_END: ; end of code
file "EYES.RAW"
skindata rb 60*30*3
winref rb 45*60