docs/config.txt: change *.obj to *.sys in the sound section

git-svn-id: svn://kolibrios.org@9425 a494cfbc-eb01-0410-851d-a64ba20cac60

data/ca/docs/CONFIG.TXT

@@ -57,17 +57,17 @@ c) Two previous points sets background for a long time (until next
    skin, for detailed comments look at distributive sources.
 
 6. Sound.
-   Driver sound.obj, which is located on ramdisk by default, is intended for
+   Driver sound.sys, which is located on ramdisk by default, is intended for
    south bridges Intel ICH, ICH0, ICH2, ICH3, ICH4, ICH5, ICH6, ICH7 and
    NVidia NForce, NForce 2, NForce 3, NForce 4. If you have SB16-compatible
-   sound card, remove sound.obj and rename sb16.obj from the folder 'drivers'
-   to sound.obj. If you have controller sis7012, rename sis.obj from root
-   folder in distributive to sound.obj and copy it to floppy or image to
-   the folder 'drivers' (replacing old). The driver fm801.obj can be useful
-   for ForceMedia FM801 controller, the driver vt8235.obj - for VIA chipsets,
-   the driver emu10k1x.obj - for EMU10K1X audioprocessor, all are intended to
+   sound card, remove sound.sys and rename sb16.sys from the folder 'drivers'
+   to sound.sys. If you have controller sis7012, rename sis.sys from root
+   folder in distributive to sound.sys and copy it to floppy or image to
+   the folder 'drivers' (replacing old). The driver fm801.sys can be useful
+   for ForceMedia FM801 controller, the driver vt8235.sys - for VIA chipsets,
+   the driver emu10k1x.sys - for EMU10K1X audioprocessor, all are intended to
    similar with previous case use: copy it to the folder 'drivers' as
-   'sound.obj', replacing the old file.
+   'sound.sys', replacing the old file.
 
 7. Bus Disconnect.
    The application KBD (Kolibri Bus Disconnect) allows to disconnect processor

data/eng/docs/CONFIG.TXT

@@ -57,17 +57,17 @@ c) Two previous points sets background for a long time (until next
    skin, for detailed comments look at distributive sources.
 
 6. Sound.
-   Driver sound.obj, which is located on ramdisk by default, is intended for
+   Driver sound.sys, which is located on ramdisk by default, is intended for
    south bridges Intel ICH, ICH0, ICH2, ICH3, ICH4, ICH5, ICH6, ICH7 and
    NVidia NForce, NForce 2, NForce 3, NForce 4. If you have SB16-compatible
-   sound card, remove sound.obj and rename sb16.obj from the folder 'drivers'
-   to sound.obj. If you have controller sis7012, rename sis.obj from root
-   folder in distributive to sound.obj and copy it to floppy or image to
-   the folder 'drivers' (replacing old). The driver fm801.obj can be useful
-   for ForceMedia FM801 controller, the driver vt8235.obj - for VIA chipsets,
-   the driver emu10k1x.obj - for EMU10K1X audioprocessor, all are intended to
+   sound card, remove sound.sys and rename sb16.sys from the folder 'drivers'
+   to sound.sys. If you have controller sis7012, rename sis.sys from root
+   folder in distributive to sound.sys and copy it to floppy or image to
+   the folder 'drivers' (replacing old). The driver fm801.sys can be useful
+   for ForceMedia FM801 controller, the driver vt8235.sys - for VIA chipsets,
+   the driver emu10k1x.sys - for EMU10K1X audioprocessor, all are intended to
    similar with previous case use: copy it to the folder 'drivers' as
-   'sound.obj', replacing the old file.
+   'sound.sys', replacing the old file.
 
 7. Bus Disconnect.
    The application KBD (Kolibri Bus Disconnect) allows to disconnect processor

data/et/docs/CONFIG.TXT

@@ -57,17 +57,17 @@ c) Two previous points sets background for a long time (until next
    skin, for detailed comments look at distributive sources.
 
 6. Sound.
-   Driver sound.obj, which is located on ramdisk by default, is intended for
+   Driver sound.sys, which is located on ramdisk by default, is intended for
    south bridges Intel ICH, ICH0, ICH2, ICH3, ICH4, ICH5, ICH6, ICH7 and
    NVidia NForce, NForce 2, NForce 3, NForce 4. If you have SB16-compatible
-   sound card, remove sound.obj and rename sb16.obj from the folder 'drivers'
-   to sound.obj. If you have controller sis7012, rename sis.obj from root
-   folder in distributive to sound.obj and copy it to floppy or image to
-   the folder 'drivers' (replacing old). The driver fm801.obj can be useful
-   for ForceMedia FM801 controller, the driver vt8235.obj - for VIA chipsets,
-   the driver emu10k1x.obj - for EMU10K1X audioprocessor, all are intended to
+   sound card, remove sound.sys and rename sb16.sys from the folder 'drivers'
+   to sound.sys. If you have controller sis7012, rename sis.sys from root
+   folder in distributive to sound.sys and copy it to floppy or image to
+   the folder 'drivers' (replacing old). The driver fm801.sys can be useful
+   for ForceMedia FM801 controller, the driver vt8235.sys - for VIA chipsets,
+   the driver emu10k1x.sys - for EMU10K1X audioprocessor, all are intended to
    similar with previous case use: copy it to the folder 'drivers' as
-   'sound.obj', replacing the old file.
+   'sound.sys', replacing the old file.
 
 7. Bus Disconnect.
    The application KBD (Kolibri Bus Disconnect) allows to disconnect processor

data/it/docs/CONFIG.TXT

@@ -66,20 +66,20 @@ Tra parentesi vengono riportati i nomi degli eseguibili dei singoli programmi.
    nella cartella skins.
 
 6. Suono. //non trovo sis7012
-   I driver sound.obj, sono compatibili con le schede audio Intel ICH,
+   I driver sound.sys, sono compatibili con le schede audio Intel ICH,
    ICH0, ICH2, ICH3, ICH4, ICH5, ICH6, ICH7 e NVidia NForce, NForce 2,
    NForce 3, NForce 4.
    Se si ha una scheda audio compatibile con SB16, allora è necessario
-   rimuovere il file sound.obj dal ram Disk e rinominare il file sb16.obj
-   dalla cartella 'drivers' in sound.obj.
-   Se si ha una scheda audio sis7012, è necessario rinominare il file sis.obj
+   rimuovere il file sound.sys dal ram Disk e rinominare il file sb16.sys
+   dalla cartella 'drivers' in sound.sys.
+   Se si ha una scheda audio sis7012, è necessario rinominare il file sis.sys
    dalla cartella radice del floppy, e copiarlo nella cartella driver nella ram,
    sostituendo il vecchio file.
-   Il driver fm801.obj serve per le schede audio ForceMedia FM801, il
-   driver vt8235.obj per i chipset VIA e i driver emu10k1x.obj per gli
+   Il driver fm801.sys serve per le schede audio ForceMedia FM801, il
+   driver vt8235.sys per i chipset VIA e i driver emu10k1x.sys per gli
    audioprocessori EMU10K1X. La loro inizializzazione è analoga quella del
    file sis7012, è necessario copiarli nella cartella drivers, rinominadoli
-   in sis.obj e rimuovendo il vecchio file.
+   in sis.sys e rimuovendo il vecchio file.
 
 7. Bus Disconnect.
    La applicazione KBD (Kolibri Bus Disconnect), permette di disconnettere

data/rus/docs/CONFIG.TXT

@@ -62,17 +62,17 @@
    дистрибутива.
 
 6. Звук.
-   Драйвер sound.obj, находящийся на рамдиске по умолчанию, выполняет свои
+   Драйвер sound.sys, находящийся на рамдиске по умолчанию, выполняет свои
    функции для южных мостов Intel ICH, ICH0, ICH2, ICH3, ICH4, ICH5, ICH6, ICH7
    и NVidia NForce, NForce 2, NForce 3, NForce 4. Если у вас SB16-совместимая
-   звуковая карта, удалите sound.obj и переименуйте sb16.obj из каталога
-   drivers в sound.obj. Если у вас контроллер sis7012, переименуйте sis.obj из
-   корневого каталога дистрибутива в sound.obj и скопируйте его на дискету и
+   звуковая карта, удалите sound.sys и переименуйте sb16.sys из каталога
+   drivers в sound.sys. Если у вас контроллер sis7012, переименуйте sis.sys из
+   корневого каталога дистрибутива в sound.sys и скопируйте его на дискету и
    образ в каталог drivers (заменив старый). Для звуковой карты на основе
-   контроллера ForteMedia FM801 может подойти драйвер fm801.obj из каталога
-   drivers, для чипсетов от VIA - драйвер vt8235.obj, для аудиопроцессора
-   EMU10K1X - драйвер emu10k1x.obj, с которыми следует поступать аналогично -
-   скопировать под именем sound.obj, заменив старый.
+   контроллера ForteMedia FM801 может подойти драйвер fm801.sys из каталога
+   drivers, для чипсетов от VIA - драйвер vt8235.sys, для аудиопроцессора
+   EMU10K1X - драйвер emu10k1x.sys, с которыми следует поступать аналогично -
+   скопировать под именем sound.sys, заменив старый.
 
 7. Bus Disconnect.
    Программа KBD (Kolibri Bus Disconnect) позволяет отключать шину процессора

data/sp/docs/CONFIG.TXT

@@ -57,17 +57,17 @@ c) Two previous points sets background for a long time (until next
    skin, for detailed comments look at distributive sources.
 
 6. Sound.
-   Driver sound.obj, which is located on ramdisk by default, is intended for
+   Driver sound.sys, which is located on ramdisk by default, is intended for
    south bridges Intel ICH, ICH0, ICH2, ICH3, ICH4, ICH5, ICH6, ICH7 and
    NVidia NForce, NForce 2, NForce 3, NForce 4. If you have SB16-compatible
-   sound card, remove sound.obj and rename sb16.obj from the folder 'drivers'
-   to sound.obj. If you have controller sis7012, rename sis.obj from root
-   folder in distributive to sound.obj and copy it to floppy or image to
-   the folder 'drivers' (replacing old). The driver fm801.obj can be useful
-   for ForceMedia FM801 controller, the driver vt8235.obj - for VIA chipsets,
-   the driver emu10k1x.obj - for EMU10K1X audioprocessor, all are intended to
+   sound card, remove sound.sys and rename sb16.sys from the folder 'drivers'
+   to sound.sys. If you have controller sis7012, rename sis.sys from root
+   folder in distributive to sound.sys and copy it to floppy or image to
+   the folder 'drivers' (replacing old). The driver fm801.sys can be useful
+   for ForceMedia FM801 controller, the driver vt8235.sys - for VIA chipsets,
+   the driver emu10k1x.sys - for EMU10K1X audioprocessor, all are intended to
    similar with previous case use: copy it to the folder 'drivers' as
-   'sound.obj', replacing the old file.
+   'sound.sys', replacing the old file.
 
 7. Bus Disconnect.
    The application KBD (Kolibri Bus Disconnect) allows to disconnect processor

drivers/audio/sb16/README.TXT

@@ -64,7 +64,7 @@ Now everything should be OK.
 ;It works for a part of the second and then stops, but system doesn't hang------
 Go to 'config.inc' of my driver and change 'sb_irq_num' value from 5 to 7.
 Then save, rebuild driver (compile 'sound.asm'), put 'sound' to /sys/drivers/
-(you need to rename file 'sound' to 'sound.obj'), restart kernel and try again
+(you need to rename file 'sound' to 'sound.sys'), restart kernel and try again
 to produce sound.
 
 ;-------------------------------------------------------------------------------